ASCA Sequence 48000000 Event File Info

This page lists the filtered and unfiltered event files sorted by instrument and mode. Exposure times (not dead time corrected) and count rates are given for each file along with a list of FITS keywords describing the observation mode. Where two values are separated by a slash, the first value refers to the filtered event file and the second to the corresponding unfiltered file.

The following information is also available:

The processing header page

Here is in index of the event files for each instrument:

SIS 0
SIS 1
GIS 2
GIS 3

SIS0:

Total Exposure: 238.9 / 757 kiloseconds
Total Events: 4548816 / 12357907 events
Mean Count Rate: 19.045 / 16.326 events per second
Number of Files: 21 / 34

SIS0 BRIGHT mode event files with HIGH bit rate

ad48000000s001602h.evt / ad48000000s001602h.unf

Exposure: 3.3 / 6.1 kiloseconds
Events: 67617 / 130522 events
Count Rate: 20.54 / 21.355 events per second

Selected FITS Keywords:

S0_ARIO1=	0	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	6	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	425	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	FAINT	/ DATAMODE before any conversion

ad48000000s001902h.evt / ad48000000s001902h.unf

Exposure: 0.2 / 0.7 kiloseconds
Events: 4432 / 17464 events
Count Rate: 26.243 / 24.667 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s002002h.unf

Exposure: 0 / 0.2 kiloseconds
Events: 0 / 13286 events
Count Rate: NaN / 85.167 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	1111	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	4	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	0 1 2 3	/ S0 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s002102h.evt / ad48000000s002102h.unf

Exposure: 0.1 / 0.5 kiloseconds
Events: 1588 / 11833 events
Count Rate: 24.38 / 24.448 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s002202h.evt / ad48000000s002202h.unf

Exposure: 0.1 / 0.5 kiloseconds
Events: 1657 / 7912 events
Count Rate: 19.523 / 17.504 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s002302h.evt / ad48000000s002302h.unf

Exposure: 0 / 0.3 kiloseconds
Events: 716 / 7282 events
Count Rate: 16.545 / 20.925 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s002902h.evt / ad48000000s002902h.unf

Exposure: 0 / 0.1 kiloseconds
Events: 261 / 2032 events
Count Rate: 20.967 / 18.815 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

SIS0 BRIGHT mode event files with MEDIUM bit rate

ad48000000s000502m.evt / ad48000000s000502m.unf

Exposure: 6 / 42.5 kiloseconds
Events: 141751 / 1214644 events
Count Rate: 23.484 / 28.612 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s000702m.evt / ad48000000s000702m.unf

Exposure: 26.4 / 43 kiloseconds
Events: 517978 / 980343 events
Count Rate: 19.63 / 22.792 events per second

Selected FITS Keywords:

S0_ARIO1=	0	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	6	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	425	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s000902m.evt / ad48000000s000902m.unf

Exposure: 13.6 / 18.1 kiloseconds
Events: 265503 / 367389 events
Count Rate: 19.559 / 20.352 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s001002m.evt / ad48000000s001002m.unf

Exposure: 6.6 / 14.5 kiloseconds
Events: 123796 / 366376 events
Count Rate: 18.633 / 25.205 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s001102m.evt / ad48000000s001102m.unf

Exposure: 14.5 / 17.2 kiloseconds
Events: 265979 / 361430 events
Count Rate: 18.298 / 21.033 events per second

Selected FITS Keywords:

S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s001802m.unf

Exposure: 0 / 4.5 kiloseconds
Events: 0 / 30766 events
Count Rate: NaN / 6.843 events per second

Selected FITS Keywords:

S0_ARIO1=	0	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	6	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	425	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	FAINT	/ DATAMODE before any conversion

SIS0 BRIGHT mode event files with LOW bit rate

ad48000000s000802l.unf

Exposure: 0 / 76.4 kiloseconds
Events: 0 / 395506 events
Count Rate: NaN / 5.177 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000s001202l.unf

Exposure: 0 / 48.4 kiloseconds
Events: 0 / 360140 events
Count Rate: NaN / 7.434 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	0	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	6	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	425	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000s001302l.unf

Exposure: 0 / 75.6 kiloseconds
Events: 0 / 335511 events
Count Rate: NaN / 4.436 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000s001402l.unf

Exposure: 0 / 63.7 kiloseconds
Events: 0 / 247656 events
Count Rate: NaN / 3.89 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000s001502l.unf

Exposure: 0 / 60.9 kiloseconds
Events: 0 / 192022 events
Count Rate: NaN / 3.154 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000s002702l.unf

Exposure: 0 / 11.1 kiloseconds
Events: 0 / 2536 events
Count Rate: NaN / 0.229 events per second

Selected FITS Keywords:

S0_AEANL=	1	/ S0 AE analog status
S0_ARIO1=	0	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	6	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	425	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000s002802l.unf

Exposure: 0 / 0.3 kiloseconds
Events: 0 / 2209 events
Count Rate: NaN / 7.889 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0110	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	2	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 2 1 2	/ S0 CCD readout order
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000s003102l.unf

Exposure: 0 / 8.3 kiloseconds
Events: 0 / 1966 events
Count Rate: NaN / 0.236 events per second

Selected FITS Keywords:

S0_AEANL=	1	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000s003202l.unf

Exposure: 0 / 12 kiloseconds
Events: 0 / 1606 events
Count Rate: NaN / 0.133 events per second

Selected FITS Keywords:

S0_AEANL=	1	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000s003402l.unf

Exposure: 0 / 5.8 kiloseconds
Events: 0 / 1414 events
Count Rate: NaN / 0.243 events per second

Selected FITS Keywords:

S0_AEANL=	1	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
S0CCDPOW=	0100	/ Which S0 CCDs are in use(0123): 0=OFF 1=ON
S0CCDMOD=	1	/ How many S0 CCDs are in use: 1, 2, or 4
S0CCDLST=	1 1 1 1	/ S0 CCD readout order
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

SIS0 BRIGHT2 mode event files with HIGH bit rate

ad48000000s001612h.evt / ad48000000s001612h.unf
- Exposure: 3.3 / 6.1 kiloseconds
- Events: 68748 / 131456 events
- Count Rate: 20.883 / 21.508 events per second
- Selected FITS Keywords:

SIS0 BRIGHT2 mode event files with MEDIUM bit rate

ad48000000s001812m.unf
- Exposure: 0 / 4.5 kiloseconds
- Events: 0 / 30956 events
- Count Rate: NaN / 6.885 events per second
- Selected FITS Keywords:

SIS0 FAINT mode event files with HIGH bit rate

ad48000000s001601h.unf
- Exposure: 0 / 6.1 kiloseconds
- Events: 0 / 146858 events
- Count Rate: NaN / 24.028 events per second
- Selected FITS Keywords:

SIS0 FAINT mode event files with MEDIUM bit rate

ad48000000s001801m.unf
- Exposure: 0 / 4.5 kiloseconds
- Events: 0 / 35968 events
- Count Rate: NaN / 8 events per second
- Selected FITS Keywords:

SIS0 FAST mode event files with HIGH bit rate

ad48000000s000103h.evt / ad48000000s000103h.unf

Exposure: 51.3 / 69.1 kiloseconds
Events: 835557 / 1731670 events
Count Rate: 16.28 / 25.059 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	0	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	6	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	425	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000s000203h.evt / ad48000000s000203h.unf

Exposure: 20.9 / 34.5 kiloseconds
Events: 540186 / 1664081 events
Count Rate: 25.867 / 48.19 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000s000303h.evt / ad48000000s000303h.unf

Exposure: 26.3 / 38.6 kiloseconds
Events: 606349 / 1334753 events
Count Rate: 23.022 / 34.551 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000s000403h.evt / ad48000000s000403h.unf

Exposure: 36.1 / 51.5 kiloseconds
Events: 592589 / 1299835 events
Count Rate: 16.406 / 25.244 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000s000603h.evt / ad48000000s000603h.unf

Exposure: 30.5 / 48.3 kiloseconds
Events: 534187 / 1192819 events
Count Rate: 17.512 / 24.68 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000s001703h.evt / ad48000000s001703h.unf

Exposure: 2.3 / 3.1 kiloseconds
Events: 43257 / 67279 events
Count Rate: 18.632 / 22.015 events per second

Selected FITS Keywords:

S0_AEANL=	0	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000s003003h.unf

Exposure: 0 / 0 kiloseconds
Events: 0 / 2000 events
Count Rate: NaN / 166.667 events per second

Selected FITS Keywords:

S0_AEANL=	1	/ S0 AE analog status
S0_ARIO1=	1	/ S0 area discrimination IN/OUT for ccd 1
S0_STAH1=	196	/ S0 area discrimination H start addr for ccd 1
S0_ENDH1=	310	/ S0 area discrimination H end addr for ccd 1
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

SIS0 FAST mode event files with LOW bit rate

ad48000000s002403l.evt / ad48000000s002403l.unf
- Exposure: 0.2 / 0.3 kiloseconds
- Events: 1615 / 4434 events
- Count Rate: 10.094 / 13.856 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000213_0807.0000 / Name of input telemetry file
ad48000000s002503l.evt / ad48000000s002503l.unf
- Exposure: 0.1 / 0.5 kiloseconds
- Events: 902 / 4357 events
- Count Rate: 10.25 / 9.555 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000218_0000.0000 / Name of input telemetry file
ad48000000s002603l.evt / ad48000000s002603l.unf
- Exposure: 0.2 / 0.2 kiloseconds
- Events: 2161 / 3235 events
- Count Rate: 11.319 / 13.044 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000222_0000.0000 / Name of input telemetry file
ad48000000s003303l.evt / ad48000000s003303l.unf
- Exposure: 0.1 / 0.1 kiloseconds
- Events: 735 / 1599 events
- Count Rate: 9.724 / 12.895 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000216_0000.0000 / Name of input telemetry file

SIS1:

Total Exposure: 259.4 / 753 kiloseconds
Total Events: 4213056 / 10665346 events
Mean Count Rate: 16.244 / 14.164 events per second
Number of Files: 20 / 33

SIS1 BRIGHT mode event files with HIGH bit rate

ad48000000s101602h.evt / ad48000000s101602h.unf

Exposure: 3.4 / 6.1 kiloseconds
Events: 55314 / 113151 events
Count Rate: 16.463 / 18.501 events per second

Selected FITS Keywords:

S1_ARIO3=	0	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	6	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	425	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	FAINT	/ DATAMODE before any conversion

ad48000000s101802h.evt / ad48000000s101802h.unf

Exposure: 0.2 / 0.7 kiloseconds
Events: 3919 / 16787 events
Count Rate: 23.205 / 23.981 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s101902h.evt / ad48000000s101902h.unf

Exposure: 0.1 / 0.5 kiloseconds
Events: 1290 / 10095 events
Count Rate: 19.805 / 21.388 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s102002h.evt / ad48000000s102002h.unf

Exposure: 0.1 / 0.5 kiloseconds
Events: 1711 / 7188 events
Count Rate: 15.536 / 14.376 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s102102h.evt / ad48000000s102102h.unf

Exposure: 0 / 0.4 kiloseconds
Events: 650 / 6009 events
Count Rate: 15.39 / 17.071 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s102902h.evt / ad48000000s102902h.unf

Exposure: 0 / 0.1 kiloseconds
Events: 150 / 1678 events
Count Rate: 17.756 / 16.78 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s103102h.unf

Exposure: 0 / 0.2 kiloseconds
Events: 0 / 1446 events
Count Rate: NaN / 8.817 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	1111	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	4	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	2 3 0 1	/ S1 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

SIS1 BRIGHT mode event files with MEDIUM bit rate

ad48000000s100502m.evt / ad48000000s100502m.unf

Exposure: 21.9 / 42.5 kiloseconds
Events: 475911 / 1064615 events
Count Rate: 21.713 / 25.078 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s100702m.evt / ad48000000s100702m.unf

Exposure: 26.6 / 43 kiloseconds
Events: 419364 / 847042 events
Count Rate: 15.769 / 19.695 events per second

Selected FITS Keywords:

S1_ARIO3=	0	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	6	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	425	/ S1 area discrimination H end addr for ccd 3
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s101102m.evt / ad48000000s101102m.unf

Exposure: 13.7 / 18.1 kiloseconds
Events: 216259 / 316611 events
Count Rate: 15.779 / 17.539 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s101202m.evt / ad48000000s101202m.unf

Exposure: 11.9 / 14.5 kiloseconds
Events: 215179 / 312904 events
Count Rate: 18.126 / 21.526 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s101302m.evt / ad48000000s101302m.unf

Exposure: 14.6 / 17.2 kiloseconds
Events: 215238 / 309406 events
Count Rate: 14.742 / 18.006 events per second

Selected FITS Keywords:

S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file
ORIGMODE=	BRIGHT	/ DATAMODE before any conversion

ad48000000s101702m.unf

Exposure: 0 / 4.5 kiloseconds
Events: 0 / 30314 events
Count Rate: NaN / 6.742 events per second

Selected FITS Keywords:

S1_ARIO3=	0	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	6	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	425	/ S1 area discrimination H end addr for ccd 3
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file
ORIGMODE=	FAINT	/ DATAMODE before any conversion

SIS1 BRIGHT mode event files with LOW bit rate

ad48000000s100802l.unf

Exposure: 0 / 76.4 kiloseconds
Events: 0 / 428672 events
Count Rate: NaN / 5.611 events per second

Selected FITS Keywords:

S1_AEANL=	0	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000s100902l.unf

Exposure: 0 / 75.6 kiloseconds
Events: 0 / 375975 events
Count Rate: NaN / 4.971 events per second

Selected FITS Keywords:

S1_AEANL=	0	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000s101002l.unf

Exposure: 0 / 48.4 kiloseconds
Events: 0 / 363973 events
Count Rate: NaN / 7.513 events per second

Selected FITS Keywords:

S1_AEANL=	0	/ S1 AE analog status
S1_ARIO3=	0	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	6	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	425	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000s101402l.unf

Exposure: 0 / 63.7 kiloseconds
Events: 0 / 280656 events
Count Rate: NaN / 4.405 events per second

Selected FITS Keywords:

S1_AEANL=	0	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000s101502l.unf

Exposure: 0 / 60.7 kiloseconds
Events: 0 / 229778 events
Count Rate: NaN / 3.783 events per second

Selected FITS Keywords:

S1_AEANL=	0	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000s102502l.unf

Exposure: 0 / 10.2 kiloseconds
Events: 0 / 2305 events
Count Rate: NaN / 0.227 events per second

Selected FITS Keywords:

S1_AEANL=	1	/ S1 AE analog status
S1_ARIO3=	0	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	6	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	425	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000s102602l.unf

Exposure: 0 / 7.9 kiloseconds
Events: 0 / 1920 events
Count Rate: NaN / 0.244 events per second

Selected FITS Keywords:

S1_AEANL=	1	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000s102702l.unf

Exposure: 0 / 0.2 kiloseconds
Events: 0 / 1863 events
Count Rate: NaN / 7.635 events per second

Selected FITS Keywords:

S1_AEANL=	0	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	1001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	2	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 0 3 0	/ S1 CCD readout order
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000s103202l.unf

Exposure: 0 / 5.8 kiloseconds
Events: 0 / 1408 events
Count Rate: NaN / 0.242 events per second

Selected FITS Keywords:

S1_AEANL=	1	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000s103302l.unf

Exposure: 0 / 9.6 kiloseconds
Events: 0 / 1357 events
Count Rate: NaN / 0.141 events per second

Selected FITS Keywords:

S1_AEANL=	1	/ S1 AE analog status
S1_ARIO3=	1	/ S1 area discrimination IN/OUT for ccd 3
S1_STAH3=	234	/ S1 area discrimination H start addr for ccd 3
S1_ENDH3=	348	/ S1 area discrimination H end addr for ccd 3
S1CCDPOW=	0001	/ Which S1 CCDs are in use(0123): 0=OFF 1=ON
S1CCDMOD=	1	/ How many S1 CCDs are in use: 1, 2, or 4
S1CCDLST=	3 3 3 3	/ S1 CCD readout order
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

SIS1 BRIGHT2 mode event files with HIGH bit rate

ad48000000s101612h.evt / ad48000000s101612h.unf
- Exposure: 3.4 / 6.1 kiloseconds
- Events: 55750 / 113536 events
- Count Rate: 16.592 / 18.564 events per second
- Selected FITS Keywords:

SIS1 BRIGHT2 mode event files with MEDIUM bit rate

ad48000000s101712m.unf
- Exposure: 0 / 4.5 kiloseconds
- Events: 0 / 30409 events
- Count Rate: NaN / 6.764 events per second
- Selected FITS Keywords:

SIS1 FAINT mode event files with HIGH bit rate

ad48000000s101601h.unf
- Exposure: 0 / 6.1 kiloseconds
- Events: 0 / 129073 events
- Count Rate: NaN / 21.104 events per second
- Selected FITS Keywords:

SIS1 FAINT mode event files with MEDIUM bit rate

ad48000000s101701m.unf
- Exposure: 0 / 4.5 kiloseconds
- Events: 0 / 35967 events
- Count Rate: NaN / 8 events per second
- Selected FITS Keywords:

SIS1 FAST mode event files with HIGH bit rate

ad48000000s100103h.evt / ad48000000s100103h.unf
- Exposure: 50.3 / 69 kiloseconds
- Events: 690599 / 1433204 events
- Count Rate: 13.743 / 20.764 events per second
- Selected FITS Keywords:
  
  S1_AEANL= 0 / S1 AE analog status
  
  TLM_FILE= ft000213_0807.0000 / Name of input telemetry file
ad48000000s100203h.evt / ad48000000s100203h.unf
- Exposure: 20.8 / 34.6 kiloseconds
- Events: 444524 / 1317381 events
- Count Rate: 21.327 / 38.11 events per second
- Selected FITS Keywords:
  
  S1_AEANL= 0 / S1 AE analog status
  
  TLM_FILE= ft000220_0000.0000 / Name of input telemetry file
ad48000000s100303h.evt / ad48000000s100303h.unf
- Exposure: 26.3 / 38.5 kiloseconds
- Events: 503960 / 1084846 events
- Count Rate: 19.188 / 28.146 events per second
- Selected FITS Keywords:
  
  S1_AEANL= 0 / S1 AE analog status
  
  TLM_FILE= ft000222_0000.0000 / Name of input telemetry file
ad48000000s100403h.evt / ad48000000s100403h.unf
- Exposure: 36.1 / 51.5 kiloseconds
- Events: 489000 / 1078184 events
- Count Rate: 13.536 / 20.931 events per second
- Selected FITS Keywords:
  
  S1_AEANL= 0 / S1 AE analog status
  
  TLM_FILE= ft000216_0000.0000 / Name of input telemetry file
ad48000000s100603h.evt / ad48000000s100603h.unf
- Exposure: 32.9 / 51.4 kiloseconds
- Events: 474886 / 1012086 events
- Count Rate: 14.424 / 19.69 events per second
- Selected FITS Keywords:
  
  S1_AEANL= 0 / S1 AE analog status
  
  TLM_FILE= ft000218_0000.0000 / Name of input telemetry file
ad48000000s102803h.unf
- Exposure: 0 / 0 kiloseconds
- Events: 0 / 1835 events
- Count Rate: NaN / 152.917 events per second
- Selected FITS Keywords:
  
  S1_AEANL= 1 / S1 AE analog status
  
  TLM_FILE= ft000218_0000.0000 / Name of input telemetry file

SIS1 FAST mode event files with LOW bit rate

ad48000000s102203l.evt / ad48000000s102203l.unf
- Exposure: 0.2 / 0.3 kiloseconds
- Events: 1528 / 4132 events
- Count Rate: 9.55 / 12.913 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000213_0807.0000 / Name of input telemetry file
ad48000000s102303l.evt / ad48000000s102303l.unf
- Exposure: 0.1 / 0.5 kiloseconds
- Events: 853 / 4095 events
- Count Rate: 9.693 / 8.98 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000218_0000.0000 / Name of input telemetry file
ad48000000s102403l.evt / ad48000000s102403l.unf
- Exposure: 0.2 / 0.2 kiloseconds
- Events: 2017 / 2954 events
- Count Rate: 11.027 / 12.308 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000222_0000.0000 / Name of input telemetry file
ad48000000s103003l.evt / ad48000000s103003l.unf
- Exposure: 0.1 / 0.1 kiloseconds
- Events: 704 / 1476 events
- Count Rate: 9.314 / 11.903 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000216_0000.0000 / Name of input telemetry file

GIS2:

Total Exposure: 408.2 / 629.4 kiloseconds
Total Events: 5404848 / 6586782 events
Mean Count Rate: 13.24 / 10.465 events per second
Number of Files: 31 / 34

GIS2 PH mode event files with HIGH bit rate

ad48000000g200170h.evt / ad48000000g200170h.unf
- Exposure: 64.5 / 73.4 kiloseconds
- Events: 1081159 / 1275498 events
- Count Rate: 16.758 / 17.369 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000213_0807.0000 / Name of input telemetry file
ad48000000g200270h.evt / ad48000000g200270h.unf
- Exposure: 40.6 / 48.3 kiloseconds
- Events: 679150 / 819304 events
- Count Rate: 16.742 / 16.971 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000216_0000.0000 / Name of input telemetry file
ad48000000g200370h.evt / ad48000000g200370h.unf
- Exposure: 35.4 / 46.1 kiloseconds
- Events: 578095 / 714431 events
- Count Rate: 16.334 / 15.487 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000218_0000.0000 / Name of input telemetry file
ad48000000g200570h.evt / ad48000000g200570h.unf
- Exposure: 21.9 / 31.3 kiloseconds
- Events: 496158 / 619251 events
- Count Rate: 22.679 / 19.762 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000220_0000.0000 / Name of input telemetry file
ad48000000g200770h.evt / ad48000000g200770h.unf
- Exposure: 20.2 / 30 kiloseconds
- Events: 439606 / 561933 events
- Count Rate: 21.736 / 18.741 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000222_0000.0000 / Name of input telemetry file

GIS2 PH mode event files with MEDIUM bit rate

ad48000000g200470m.evt / ad48000000g200470m.unf

Exposure: 40.3 / 43.4 kiloseconds
Events: 584423 / 659182 events
Count Rate: 14.506 / 15.18 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g200670m.evt / ad48000000g200670m.unf

Exposure: 33.4 / 38.8 kiloseconds
Events: 507731 / 600172 events
Count Rate: 15.213 / 15.449 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g200870m.evt / ad48000000g200870m.unf

Exposure: 16.1 / 17 kiloseconds
Events: 227112 / 251684 events
Count Rate: 14.082 / 14.784 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g200970m.evt / ad48000000g200970m.unf

Exposure: 14.2 / 17.2 kiloseconds
Events: 203665 / 236260 events
Count Rate: 14.393 / 13.749 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g201070m.evt / ad48000000g201070m.unf

Exposure: 13.4 / 14 kiloseconds
Events: 194568 / 209639 events
Count Rate: 14.511 / 15.026 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000g202470m.evt / ad48000000g202470m.unf

Exposure: 0 / 0.1 kiloseconds
Events: 6 / 752 events
Count Rate: 11.661 / 6.714 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g202570m.evt / ad48000000g202570m.unf

Exposure: 0 / 0.1 kiloseconds
Events: 701 / 737 events
Count Rate: 14.604 / 11.516 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g202670m.evt / ad48000000g202670m.unf

Exposure: 0 / 0 kiloseconds
Events: 662 / 700 events
Count Rate: 13.792 / 14.583 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g202770m.evt / ad48000000g202770m.unf

Exposure: 0.1 / 0.1 kiloseconds
Events: 671 / 692 events
Count Rate: 6.99 / 7.208 events per second

Selected FITS Keywords:

HV_RED=	ON	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g202870m.evt / ad48000000g202870m.unf

Exposure: 0.1 / 0.1 kiloseconds
Events: 498 / 636 events
Count Rate: 6.225 / 6.625 events per second

Selected FITS Keywords:

HV_RED=	ON	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g203370m.evt / ad48000000g203370m.unf

Exposure: 0 / 0 kiloseconds
Events: 247 / 504 events
Count Rate: 15.019 / 15.75 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	72	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g203470m.evt / ad48000000g203470m.unf

Exposure: 0 / 0 kiloseconds
Events: 484 / 504 events
Count Rate: 15.125 / 15.75 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111011111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

GIS2 PH mode event files with LOW bit rate

ad48000000g201170l.evt / ad48000000g201170l.unf

Exposure: 28.1 / 60.8 kiloseconds
Events: 106751 / 152720 events
Count Rate: 3.804 / 2.51 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g201270l.evt / ad48000000g201270l.unf

Exposure: 26.8 / 64.6 kiloseconds
Events: 102006 / 140610 events
Count Rate: 3.807 / 2.177 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g201370l.evt / ad48000000g201370l.unf

Exposure: 23.6 / 33.3 kiloseconds
Events: 89654 / 125253 events
Count Rate: 3.792 / 3.761 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g201470l.evt / ad48000000g201470l.unf

Exposure: 14.4 / 43.6 kiloseconds
Events: 54757 / 98970 events
Count Rate: 3.811 / 2.271 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000g201570l.evt / ad48000000g201570l.unf

Exposure: 11.6 / 51.4 kiloseconds
Events: 44251 / 80767 events
Count Rate: 3.809 / 1.572 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g201770l.evt / ad48000000g201770l.unf

Exposure: 1.2 / 1.7 kiloseconds
Events: 4543 / 5858 events
Count Rate: 3.838 / 3.52 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000g201870l.evt / ad48000000g201870l.unf

Exposure: 0.6 / 1.2 kiloseconds
Events: 2455 / 3548 events
Count Rate: 3.834 / 3.08 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g201970l.evt / ad48000000g201970l.unf

Exposure: 0.5 / 1 kiloseconds
Events: 1932 / 2702 events
Count Rate: 3.773 / 2.639 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g202070l.evt / ad48000000g202070l.unf

Exposure: 0.5 / 0.6 kiloseconds
Events: 1955 / 2574 events
Count Rate: 3.819 / 4.022 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g202270l.unf

Exposure: 0 / 0.6 kiloseconds
Events: 0 / 1481 events
Count Rate: NaN / 2.314 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31098	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g202370l.evt / ad48000000g202370l.unf

Exposure: 0.1 / 0.3 kiloseconds
Events: 301 / 1141 events
Count Rate: 3.156 / 3.566 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	1	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g202970l.evt / ad48000000g202970l.unf

Exposure: 0.3 / 0.4 kiloseconds
Events: 410 / 563 events
Count Rate: 1.595 / 1.466 events per second

Selected FITS Keywords:

HV_RED=	ON	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g203070l.evt / ad48000000g203070l.unf

Exposure: 0.1 / 0.4 kiloseconds
Events: 290 / 546 events
Count Rate: 3.301 / 1.219 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	0	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g203170l.evt / ad48000000g203170l.unf

Exposure: 0.1 / 0.4 kiloseconds
Events: 216 / 531 events
Count Rate: 3.389 / 1.185 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	0	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g203270l.evt / ad48000000g203270l.unf

Exposure: 0.1 / 0.4 kiloseconds
Events: 391 / 527 events
Count Rate: 3.067 / 1.372 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	0	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	239	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	226	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

GIS2 MPC mode event files with HIGH bit rate

ad48000000g201671h.unf
- Exposure: 0 / 7.7 kiloseconds
- Events: 0 / 15384 events
- Count Rate: NaN / 2 events per second
- Selected FITS Keywords:
  
  HV_RED= OFF / HV-reduction on/off
  
  HVH_LVL= 3 / HV-High level (0 - 7)
  
  HVL_LVL= 4 / HV-Low level (0 - 7)
ad48000000g202171h.unf
- Exposure: 0 / 0.9 kiloseconds
- Events: 0 / 1728 events
- Count Rate: NaN / 2 events per second
- Selected FITS Keywords:
  
  HV_RED= ON / HV-reduction on/off
  
  HVH_LVL= 0 / HV-High level (0 - 7)
  
  HVL_LVL= 3 / HV-Low level (0 - 7)

GIS3:

Total Exposure: 408.1 / 629.5 kiloseconds
Total Events: 5950747 / 7160697 events
Mean Count Rate: 14.581 / 11.376 events per second
Number of Files: 29 / 33

GIS3 PH mode event files with HIGH bit rate

ad48000000g300170h.evt / ad48000000g300170h.unf
- Exposure: 64.5 / 73.4 kiloseconds
- Events: 1225612 / 1436112 events
- Count Rate: 18.998 / 19.559 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000213_0807.0000 / Name of input telemetry file
ad48000000g300270h.evt / ad48000000g300270h.unf
- Exposure: 40.6 / 48.3 kiloseconds
- Events: 766628 / 913291 events
- Count Rate: 18.902 / 18.921 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000216_0000.0000 / Name of input telemetry file
ad48000000g300370h.evt / ad48000000g300370h.unf
- Exposure: 35.4 / 46.1 kiloseconds
- Events: 654872 / 798280 events
- Count Rate: 18.501 / 17.305 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000218_0000.0000 / Name of input telemetry file
ad48000000g300570h.evt / ad48000000g300570h.unf
- Exposure: 21.9 / 31.4 kiloseconds
- Events: 564045 / 694938 events
- Count Rate: 25.766 / 22.163 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000220_0000.0000 / Name of input telemetry file
ad48000000g300670h.evt / ad48000000g300670h.unf
- Exposure: 20.2 / 30 kiloseconds
- Events: 497842 / 627799 events
- Count Rate: 24.625 / 20.949 events per second
- Selected FITS Keywords:
  
  TLM_FILE= ft000222_0000.0000 / Name of input telemetry file

GIS3 PH mode event files with MEDIUM bit rate

ad48000000g300470m.evt / ad48000000g300470m.unf

Exposure: 40.3 / 43.4 kiloseconds
Events: 628334 / 700958 events
Count Rate: 15.596 / 16.142 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g300770m.evt / ad48000000g300770m.unf

Exposure: 33.4 / 38.9 kiloseconds
Events: 523702 / 612757 events
Count Rate: 15.669 / 15.767 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g300870m.evt / ad48000000g300870m.unf

Exposure: 16.1 / 17 kiloseconds
Events: 246389 / 269593 events
Count Rate: 15.277 / 15.836 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g300970m.evt / ad48000000g300970m.unf

Exposure: 14.2 / 17.2 kiloseconds
Events: 219532 / 251456 events
Count Rate: 15.514 / 14.633 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g301070m.evt / ad48000000g301070m.unf

Exposure: 13.4 / 14 kiloseconds
Events: 205847 / 219507 events
Count Rate: 15.37 / 15.733 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000g302470m.evt / ad48000000g302470m.unf

Exposure: 0 / 0.1 kiloseconds
Events: 9 / 790 events
Count Rate: 17.492 / 7.054 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g302570m.evt / ad48000000g302570m.unf

Exposure: 0 / 0.1 kiloseconds
Events: 745 / 773 events
Count Rate: 15.521 / 12.078 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g302670m.evt / ad48000000g302670m.unf

Exposure: 0 / 0 kiloseconds
Events: 703 / 731 events
Count Rate: 14.646 / 15.229 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g302770m.evt / ad48000000g302770m.unf

Exposure: 0.1 / 0.1 kiloseconds
Events: 569 / 719 events
Count Rate: 7.113 / 7.49 events per second

Selected FITS Keywords:

HV_RED=	ON	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g302870m.evt / ad48000000g302870m.unf

Exposure: 0.1 / 0.1 kiloseconds
Events: 701 / 719 events
Count Rate: 7.302 / 7.49 events per second

Selected FITS Keywords:

HV_RED=	ON	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111111	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g303270m.unf

Exposure: 0 / 0 kiloseconds
Events: 0 / 516 events
Count Rate: NaN / 16.125 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
X_AN_USE=	1111111111111001	/ X-anode use(1) or no-use(0) for X0 - X15
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

GIS3 PH mode event files with LOW bit rate

ad48000000g301170l.evt / ad48000000g301170l.unf

Exposure: 28.1 / 60.8 kiloseconds
Events: 108081 / 152037 events
Count Rate: 3.852 / 2.499 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g301270l.evt / ad48000000g301270l.unf

Exposure: 26.8 / 64.6 kiloseconds
Events: 103381 / 139406 events
Count Rate: 3.859 / 2.158 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g301370l.evt / ad48000000g301370l.unf

Exposure: 23.6 / 33.3 kiloseconds
Events: 90890 / 125385 events
Count Rate: 3.844 / 3.765 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g301470l.evt / ad48000000g301470l.unf

Exposure: 14.4 / 43.6 kiloseconds
Events: 55330 / 98499 events
Count Rate: 3.851 / 2.257 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000g301570l.evt / ad48000000g301570l.unf

Exposure: 11.6 / 51.4 kiloseconds
Events: 44919 / 79876 events
Count Rate: 3.867 / 1.555 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g301770l.evt / ad48000000g301770l.unf

Exposure: 1.2 / 1.7 kiloseconds
Events: 4595 / 5844 events
Count Rate: 3.882 / 3.512 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000g301870l.evt / ad48000000g301870l.unf

Exposure: 0.6 / 1.2 kiloseconds
Events: 2491 / 3527 events
Count Rate: 3.89 / 3.062 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g301970l.evt / ad48000000g301970l.unf

Exposure: 0.5 / 1 kiloseconds
Events: 1965 / 2693 events
Count Rate: 3.838 / 2.63 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g302070l.evt / ad48000000g302070l.unf

Exposure: 0.5 / 0.6 kiloseconds
Events: 1984 / 2573 events
Count Rate: 3.876 / 4.02 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g302270l.unf

Exposure: 0 / 0.6 kiloseconds
Events: 0 / 1516 events
Count Rate: NaN / 2.369 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	255	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	255	/ Spread discri B for POW2 method (0-255)
SP_C_P=	255	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	0	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	0	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	120	/ Spread discri B for FLF method (0-255)
SP_C_F=	120	/ Spread discri C for FLF method (0-255)
SP_PH_F=	31353	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000220_0000.0000	/ Name of input telemetry file

ad48000000g302370l.evt / ad48000000g302370l.unf

Exposure: 0.1 / 0.3 kiloseconds
Events: 295 / 1151 events
Count Rate: 3.093 / 3.597 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	1	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000213_0807.0000	/ Name of input telemetry file

ad48000000g302970l.evt / ad48000000g302970l.unf

Exposure: 0.2 / 0.4 kiloseconds
Events: 421 / 563 events
Count Rate: 2.178 / 1.466 events per second

Selected FITS Keywords:

HV_RED=	ON	/ HV-reduction on/off
HVH_LVL=	3	/ HV-High level (0 - 7)
HVL_LVL=	4	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

ad48000000g303070l.evt / ad48000000g303070l.unf

Exposure: 0.1 / 0.4 kiloseconds
Events: 376 / 545 events
Count Rate: 2.949 / 1.419 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	0	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000222_0000.0000	/ Name of input telemetry file

ad48000000g303170l.evt / ad48000000g303170l.unf

Exposure: 0.1 / 0.4 kiloseconds
Events: 281 / 524 events
Count Rate: 3.199 / 1.17 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	0	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000218_0000.0000	/ Name of input telemetry file

ad48000000g303370l.evt / ad48000000g303370l.unf

Exposure: 0.1 / 0.4 kiloseconds
Events: 208 / 515 events
Count Rate: 3.263 / 1.15 events per second

Selected FITS Keywords:

HV_RED=	OFF	/ HV-reduction on/off
HVH_LVL=	0	/ HV-High level (0 - 7)
HVL_LVL=	3	/ HV-Low level (0 - 7)
SP_A_L_P=	0	/ Spread discri A_L for POW2 method (0-255)
SP_B_P=	0	/ Spread discri B for POW2 method (0-255)
SP_C_P=	0	/ Spread discri C for POW2 method (0-255)
SP_A_L_F=	80	/ Spread discri A_L for FLF method (0-255)
SP_A_U_F=	232	/ Spread discri A_U for FLF method (0-255)
SP_B_F=	224	/ Spread discri B for FLF method (0-255)
SP_C_F=	0	/ Spread discri C for FLF method (0-255)
SP_PH_F=	0	/ Spread discri PH for FLF method (0-1023)
TLM_FILE=	ft000216_0000.0000	/ Name of input telemetry file

GIS3 MPC mode event files with HIGH bit rate

ad48000000g301671h.unf
- Exposure: 0 / 7.7 kiloseconds
- Events: 0 / 15388 events
- Count Rate: NaN / 2 events per second
- Selected FITS Keywords:
  
  HV_RED= OFF / HV-reduction on/off
  
  HVH_LVL= 3 / HV-High level (0 - 7)
  
  HVL_LVL= 4 / HV-Low level (0 - 7)
ad48000000g302171h.unf
- Exposure: 0 / 0.9 kiloseconds
- Events: 0 / 1716 events
- Count Rate: NaN / 2 events per second
- Selected FITS Keywords:
  
  HV_RED= ON / HV-reduction on/off
  
  HVH_LVL= 0 / HV-High level (0 - 7)
  
  HVL_LVL= 3 / HV-Low level (0 - 7)