Processing Job Log for Sequence 47016030, version 003

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (11:42:34)

Checking input files for validity (11:42:35)

-> Verifying the input files
-> FITS file ft990812_2223.1040 exists
-> FITS file fa990812_2223.1040 exists
-> FITS file ad47016030_input.cat exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 2.0865024E+08 = 1999-08-12 22:23:56
-> Observation ends 2.0869445E+08 = 1999-08-13 10:40:46

Determine nominal pointing (11:42:42)

-> Checking fa990812_2223.1040 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect
Spacecraft Euler Angles: Phi=26.30359 Theta=28.40077 Psi=28.57030
Telescope pointing: R.A.=26.63741 Dec=61.83542 Roll=298.27634 degrees
-> Nominal spacecraft Euler angles: Phi=26.303594321108 Theta=28.400772046260 Psi=28.570303409467
-> Nominal telescope pointing: R.A.=26.637405227426 Dec=61.835416963722 Roll Angle=298.27634182210
-> Galactic Coordinates: Lii=129.386444 Bii=-0.343725

Running frfread on telemetry files (11:42:51)

-> Running frfread on ft990812_2223.1040
-> stdout output from frfread4
Dropping SF 3 with inconsistent datamode 0/31
Dropping SF 565 with corrupted frame indicator
605.998 second gap between superframes 1272 and 1273
Dropping SF 3204 with synch code word 2 = 64 not 32
GIS2 coordinate error time=208675145.45472 x=0 y=0 pha=96 rise=0
GIS2 coordinate error time=208675150.42346 x=0 y=0 pha=24 rise=0
609.998 second gap between superframes 3207 and 3208
Dropping SF 3244 with synch code word 2 = 33 not 32
Dropping SF 3252 with synch code word 2 = 16 not 32
Dropping SF 3253 with invalid bit rate 5
Dropping SF 3257 with invalid bit rate 0
Dropping SF 3258 with inconsistent datamode 0/2
Dropping SF 3259 with synch code word 1 = 195 not 243
Dropping SF 3271 with synch code word 0 = 251 not 250
Dropping SF 3272 with synch code word 1 = 240 not 243
Dropping SF 3273 with synch code word 2 = 45 not 32
Dropping SF 3276 with inconsistent datamode 0/31
Dropping SF 3277 with synch code word 1 = 245 not 243
Dropping SF 3299 with inconsistent datamode 0/24
Dropping SF 3300 with inconsistent datamode 0/6
Dropping SF 3301 with synch code word 0 = 226 not 250
Dropping SF 3302 with inconsistent datamode 0/31
Dropping SF 3306 with inconsistent datamode 0/6
Dropping SF 3309 with inconsistent datamode 0/31
Dropping SF 3449 with corrupted frame indicator
Dropping SF 3450 with corrupted frame indicator
Dropping SF 3451 with synch code word 0 = 154 not 250
Dropping SF 3452 with synch code word 0 = 154 not 250
Dropping SF 3455 with synch code word 2 = 33 not 32
Dropping SF 3456 with synch code word 1 = 51 not 243
Dropping SF 3457 with corrupted frame indicator
Dropping SF 3458 with corrupted frame indicator
Dropping SF 3473 with invalid bit rate 7
Dropping SF 3474 with synch code word 1 = 242 not 243
Dropping SF 3475 with synch code word 1 = 51 not 243
Dropping SF 3476 with synch code word 1 = 147 not 243
Dropping SF 3477 with synch code word 1 = 51 not 243
Dropping SF 3480 with inconsistent datamode 0/31
Dropping SF 3484 with corrupted frame indicator
GIS2 coordinate error time=208676345.7479 x=192 y=0 pha=0 rise=0
GIS2 coordinate error time=208676346.40415 x=0 y=0 pha=384 rise=0
GIS2 coordinate error time=208676347.42758 x=0 y=0 pha=24 rise=0
GIS2 coordinate error time=208676347.88071 x=0 y=0 pha=12 rise=0
SIS0 coordinate error time=208676340.9852 x=0 y=0 pha[0]=48 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=208676340.9852
1.99999 second gap between superframes 3487 and 3488
Dropping SF 3490 with inconsistent datamode 0/31
FAINT event CCD=0, but using exposure CCD=1 time=208676352.98516
Dropping SF 3494 with synch code word 0 = 154 not 250
Dropping SF 3495 with synch code word 0 = 58 not 250
GIS2 coordinate error time=208676369.52517 x=96 y=0 pha=0 rise=0
SIS0 coordinate error time=208676364.98513 x=0 y=0 pha[0]=768 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=208676364.98513
Dropping SF 3498 with corrupted frame indicator
Dropping SF 3501 with inconsistent datamode 0/31
Dropping SF 3504 with synch code word 0 = 58 not 250
Dropping SF 3507 with synch code word 0 = 226 not 250
Dropping SF 3508 with corrupted frame indicator
Dropping SF 3509 with inconsistent datamode 0/2
Dropping SF 3513 with corrupted frame indicator
Dropping SF 3514 with corrupted frame indicator
Dropping SF 3515 with synch code word 1 = 147 not 243
Dropping SF 3519 with synch code word 0 = 226 not 250
Dropping SF 3520 with synch code word 1 = 195 not 243
GIS2 coordinate error time=208676429.66952 x=128 y=0 pha=1 rise=0
SIS1 coordinate error time=208676420.98494 x=0 y=3 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=208676420.98494
SIS1 coordinate error time=208676420.98494 x=192 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=208676420.98494
Dropping SF 3529 with inconsistent datamode 0/31
Dropping SF 3696 with inconsistent datamode 0/31
Dropping SF 3697 with inconsistent datamode 0/31
GIS2 coordinate error time=208677497.2521 x=0 y=0 pha=768 rise=0
GIS2 coordinate error time=208677498.24038 x=96 y=0 pha=0 rise=0
GIS2 coordinate error time=208677498.80679 x=0 y=0 pha=96 rise=0
SIS0 coordinate error time=208677492.98159 x=192 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=208677492.98159
Dropping SF 4769 with synch code word 1 = 195 not 243
GIS2 coordinate error time=208681087.44421 x=0 y=0 pha=6 rise=0
Dropping SF 5062 with synch code word 2 = 16 not 32
Dropping SF 5063 with synch code word 1 = 240 not 243
Dropping SF 5064 with synch code word 0 = 226 not 250
Dropping SF 5065 with synch code word 1 = 240 not 243
Dropping SF 5066 with synch code word 0 = 246 not 250
Dropping SF 5067 with synch code word 0 = 202 not 250
Dropping SF 5068 with synch code word 1 = 235 not 243
Dropping SF 5069 with synch code word 1 = 51 not 243
Dropping SF 5070 with inconsistent continuation flag
Dropping SF 5072 with synch code word 1 = 147 not 243
1731.99 second gap between superframes 5100 and 5101
Dropping SF 5987 with invalid bit rate 7
609.998 second gap between superframes 5993 and 5994
7550 of 7614 super frames processed
-> 1% of superframes in ft990812_2223.1040 corrupted
-> Deleting the following files with NEVENTS=0
ft990812_2223_1040G200370L.fits
ft990812_2223_1040G203570H.fits
ft990812_2223_1040G203870H.fits
ft990812_2223_1040G203970M.fits
ft990812_2223_1040G204070M.fits
ft990812_2223_1040G204370H.fits
ft990812_2223_1040G204570H.fits
ft990812_2223_1040G204870H.fits
ft990812_2223_1040G204970L.fits
ft990812_2223_1040G205070L.fits
ft990812_2223_1040G205970M.fits
ft990812_2223_1040G300370L.fits
ft990812_2223_1040G300470M.fits
ft990812_2223_1040G302570H.fits
ft990812_2223_1040G302770H.fits
ft990812_2223_1040G303470H.fits
ft990812_2223_1040G303770H.fits
ft990812_2223_1040G303870H.fits
ft990812_2223_1040G303970M.fits
ft990812_2223_1040G304070M.fits
ft990812_2223_1040G304370H.fits
ft990812_2223_1040G304570H.fits
ft990812_2223_1040G304770H.fits
ft990812_2223_1040G304870H.fits
ft990812_2223_1040G304970L.fits
ft990812_2223_1040G305070L.fits
ft990812_2223_1040G305970M.fits
-> merging GTIs for s0 990812_2223.1040
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990812_2223_1040S0HK.fits
-> Total ONTIME for s0 990812_2223.1040 = 39503.9
-> merging GTIs for s1 990812_2223.1040
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990812_2223_1040S1HK.fits
-> Total ONTIME for s1 990812_2223.1040 = 39495.9
-> merging GTIs for g2 990812_2223.1040
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990812_2223_1040G2HK.fits
-> Total ONTIME for g2 990812_2223.1040 = 35569.9
-> merging GTIs for g3 990812_2223.1040
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990812_2223_1040G3HK.fits
-> Total ONTIME for g3 990812_2223.1040 = 35449.9

Merging event files from frfread (11:48:24)

-> Grouping s0 event files
-> stdout output from group_event_files
1 ft990812_2223_1040S000101M.fits 128050
1 ft990812_2223_1040S000301M.fits 128050
1 ft990812_2223_1040S000601M.fits 128050
1 ft990812_2223_1040S000801M.fits 128050
1 ft990812_2223_1040S001001M.fits 128050
1 ft990812_2223_1040S001201M.fits 128050
1 ft990812_2223_1040S001601M.fits 128050
1 ft990812_2223_1040S001801M.fits 128050
1 ft990812_2223_1040S002401M.fits 128050
2 ft990812_2223_1040S000401H.fits 122624
2 ft990812_2223_1040S001101H.fits 122624
2 ft990812_2223_1040S001301H.fits 122624
2 ft990812_2223_1040S001401H.fits 122624
2 ft990812_2223_1040S001501H.fits 122624
2 ft990812_2223_1040S001701H.fits 122624
2 ft990812_2223_1040S001901H.fits 122624
2 ft990812_2223_1040S002301H.fits 122624
3 ft990812_2223_1040S000201L.fits 17568
3 ft990812_2223_1040S000501L.fits 17568
3 ft990812_2223_1040S000701L.fits 17568
3 ft990812_2223_1040S000901L.fits 17568
3 ft990812_2223_1040S002001L.fits 17568
3 ft990812_2223_1040S002201L.fits 17568
4 ft990812_2223_1040S002101L.fits 96
-> Creating ad47016030s000101m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040S000101M.fits 
 2 -- ft990812_2223_1040S000301M.fits 
 3 -- ft990812_2223_1040S000601M.fits 
 4 -- ft990812_2223_1040S000801M.fits 
 5 -- ft990812_2223_1040S001001M.fits 
 6 -- ft990812_2223_1040S001201M.fits 
 7 -- ft990812_2223_1040S001601M.fits 
 8 -- ft990812_2223_1040S001801M.fits 
 9 -- ft990812_2223_1040S002401M.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040S000101M.fits 
 2 -- ft990812_2223_1040S000301M.fits 
 3 -- ft990812_2223_1040S000601M.fits 
 4 -- ft990812_2223_1040S000801M.fits 
 5 -- ft990812_2223_1040S001001M.fits 
 6 -- ft990812_2223_1040S001201M.fits 
 7 -- ft990812_2223_1040S001601M.fits 
 8 -- ft990812_2223_1040S001801M.fits 
 9 -- ft990812_2223_1040S002401M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030s000201h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 8 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040S000401H.fits 
 2 -- ft990812_2223_1040S001101H.fits 
 3 -- ft990812_2223_1040S001301H.fits 
 4 -- ft990812_2223_1040S001401H.fits 
 5 -- ft990812_2223_1040S001501H.fits 
 6 -- ft990812_2223_1040S001701H.fits 
 7 -- ft990812_2223_1040S001901H.fits 
 8 -- ft990812_2223_1040S002301H.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040S000401H.fits 
 2 -- ft990812_2223_1040S001101H.fits 
 3 -- ft990812_2223_1040S001301H.fits 
 4 -- ft990812_2223_1040S001401H.fits 
 5 -- ft990812_2223_1040S001501H.fits 
 6 -- ft990812_2223_1040S001701H.fits 
 7 -- ft990812_2223_1040S001901H.fits 
 8 -- ft990812_2223_1040S002301H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030s000301l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040S000201L.fits 
 2 -- ft990812_2223_1040S000501L.fits 
 3 -- ft990812_2223_1040S000701L.fits 
 4 -- ft990812_2223_1040S000901L.fits 
 5 -- ft990812_2223_1040S002001L.fits 
 6 -- ft990812_2223_1040S002201L.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040S000201L.fits 
 2 -- ft990812_2223_1040S000501L.fits 
 3 -- ft990812_2223_1040S000701L.fits 
 4 -- ft990812_2223_1040S000901L.fits 
 5 -- ft990812_2223_1040S002001L.fits 
 6 -- ft990812_2223_1040S002201L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 96 events ft990812_2223_1040S002101L.fits
-> Grouping s1 event files
-> stdout output from group_event_files
1 ft990812_2223_1040S100101M.fits 124302
1 ft990812_2223_1040S100301M.fits 124302
1 ft990812_2223_1040S100601M.fits 124302
1 ft990812_2223_1040S100801M.fits 124302
1 ft990812_2223_1040S101001M.fits 124302
1 ft990812_2223_1040S101201M.fits 124302
1 ft990812_2223_1040S101701M.fits 124302
1 ft990812_2223_1040S101901M.fits 124302
1 ft990812_2223_1040S102501M.fits 124302
2 ft990812_2223_1040S100401H.fits 115572
2 ft990812_2223_1040S101101H.fits 115572
2 ft990812_2223_1040S101301H.fits 115572
2 ft990812_2223_1040S101401H.fits 115572
2 ft990812_2223_1040S101501H.fits 115572
2 ft990812_2223_1040S101601H.fits 115572
2 ft990812_2223_1040S101801H.fits 115572
2 ft990812_2223_1040S102001H.fits 115572
2 ft990812_2223_1040S102401H.fits 115572
3 ft990812_2223_1040S100201L.fits 17949
3 ft990812_2223_1040S100501L.fits 17949
3 ft990812_2223_1040S100701L.fits 17949
3 ft990812_2223_1040S100901L.fits 17949
3 ft990812_2223_1040S102101L.fits 17949
3 ft990812_2223_1040S102301L.fits 17949
4 ft990812_2223_1040S102201L.fits 96
-> Creating ad47016030s100101m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040S100101M.fits 
 2 -- ft990812_2223_1040S100301M.fits 
 3 -- ft990812_2223_1040S100601M.fits 
 4 -- ft990812_2223_1040S100801M.fits 
 5 -- ft990812_2223_1040S101001M.fits 
 6 -- ft990812_2223_1040S101201M.fits 
 7 -- ft990812_2223_1040S101701M.fits 
 8 -- ft990812_2223_1040S101901M.fits 
 9 -- ft990812_2223_1040S102501M.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040S100101M.fits 
 2 -- ft990812_2223_1040S100301M.fits 
 3 -- ft990812_2223_1040S100601M.fits 
 4 -- ft990812_2223_1040S100801M.fits 
 5 -- ft990812_2223_1040S101001M.fits 
 6 -- ft990812_2223_1040S101201M.fits 
 7 -- ft990812_2223_1040S101701M.fits 
 8 -- ft990812_2223_1040S101901M.fits 
 9 -- ft990812_2223_1040S102501M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030s100201h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040S100401H.fits 
 2 -- ft990812_2223_1040S101101H.fits 
 3 -- ft990812_2223_1040S101301H.fits 
 4 -- ft990812_2223_1040S101401H.fits 
 5 -- ft990812_2223_1040S101501H.fits 
 6 -- ft990812_2223_1040S101601H.fits 
 7 -- ft990812_2223_1040S101801H.fits 
 8 -- ft990812_2223_1040S102001H.fits 
 9 -- ft990812_2223_1040S102401H.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040S100401H.fits 
 2 -- ft990812_2223_1040S101101H.fits 
 3 -- ft990812_2223_1040S101301H.fits 
 4 -- ft990812_2223_1040S101401H.fits 
 5 -- ft990812_2223_1040S101501H.fits 
 6 -- ft990812_2223_1040S101601H.fits 
 7 -- ft990812_2223_1040S101801H.fits 
 8 -- ft990812_2223_1040S102001H.fits 
 9 -- ft990812_2223_1040S102401H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030s100301l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040S100201L.fits 
 2 -- ft990812_2223_1040S100501L.fits 
 3 -- ft990812_2223_1040S100701L.fits 
 4 -- ft990812_2223_1040S100901L.fits 
 5 -- ft990812_2223_1040S102101L.fits 
 6 -- ft990812_2223_1040S102301L.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040S100201L.fits 
 2 -- ft990812_2223_1040S100501L.fits 
 3 -- ft990812_2223_1040S100701L.fits 
 4 -- ft990812_2223_1040S100901L.fits 
 5 -- ft990812_2223_1040S102101L.fits 
 6 -- ft990812_2223_1040S102301L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 96 events ft990812_2223_1040S102201L.fits
-> Grouping g2 event files
-> stdout output from group_event_files
1 ft990812_2223_1040G200170M.fits 64150
1 ft990812_2223_1040G200670M.fits 64150
1 ft990812_2223_1040G201670M.fits 64150
1 ft990812_2223_1040G201870M.fits 64150
1 ft990812_2223_1040G202170M.fits 64150
1 ft990812_2223_1040G202470M.fits 64150
1 ft990812_2223_1040G203270M.fits 64150
1 ft990812_2223_1040G204270M.fits 64150
1 ft990812_2223_1040G205870M.fits 64150
2 ft990812_2223_1040G201070H.fits 49395
2 ft990812_2223_1040G202270H.fits 49395
2 ft990812_2223_1040G202870H.fits 49395
2 ft990812_2223_1040G203070H.fits 49395
2 ft990812_2223_1040G203670H.fits 49395
2 ft990812_2223_1040G204670H.fits 49395
2 ft990812_2223_1040G205670H.fits 49395
3 ft990812_2223_1040G200270L.fits 14683
3 ft990812_2223_1040G201270L.fits 14683
3 ft990812_2223_1040G201770L.fits 14683
3 ft990812_2223_1040G202070L.fits 14683
3 ft990812_2223_1040G205270L.fits 14683
4 ft990812_2223_1040G201170L.fits 989
4 ft990812_2223_1040G201970L.fits 989
5 ft990812_2223_1040G201570M.fits 485
5 ft990812_2223_1040G202370M.fits 485
5 ft990812_2223_1040G203170M.fits 485
5 ft990812_2223_1040G205770M.fits 485
6 ft990812_2223_1040G205170L.fits 132
7 ft990812_2223_1040G200570M.fits 90
7 ft990812_2223_1040G204170M.fits 90
8 ft990812_2223_1040G201470M.fits 78
9 ft990812_2223_1040G201370M.fits 74
10 ft990812_2223_1040G200970H.fits 13
10 ft990812_2223_1040G202770H.fits 13
10 ft990812_2223_1040G205570H.fits 13
11 ft990812_2223_1040G200770H.fits 12
12 ft990812_2223_1040G200870H.fits 11
13 ft990812_2223_1040G202970H.fits 9
14 ft990812_2223_1040G202570H.fits 2
15 ft990812_2223_1040G203770H.fits 2
15 ft990812_2223_1040G204770H.fits 2
16 ft990812_2223_1040G205470H.fits 2
17 ft990812_2223_1040G200470M.fits 1
18 ft990812_2223_1040G202670H.fits 1
19 ft990812_2223_1040G203370H.fits 1
20 ft990812_2223_1040G203470H.fits 1
21 ft990812_2223_1040G204470H.fits 1
22 ft990812_2223_1040G205370H.fits 1
-> Creating ad47016030g200170m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G200170M.fits 
 2 -- ft990812_2223_1040G200670M.fits 
 3 -- ft990812_2223_1040G201670M.fits 
 4 -- ft990812_2223_1040G201870M.fits 
 5 -- ft990812_2223_1040G202170M.fits 
 6 -- ft990812_2223_1040G202470M.fits 
 7 -- ft990812_2223_1040G203270M.fits 
 8 -- ft990812_2223_1040G204270M.fits 
 9 -- ft990812_2223_1040G205870M.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G200170M.fits 
 2 -- ft990812_2223_1040G200670M.fits 
 3 -- ft990812_2223_1040G201670M.fits 
 4 -- ft990812_2223_1040G201870M.fits 
 5 -- ft990812_2223_1040G202170M.fits 
 6 -- ft990812_2223_1040G202470M.fits 
 7 -- ft990812_2223_1040G203270M.fits 
 8 -- ft990812_2223_1040G204270M.fits 
 9 -- ft990812_2223_1040G205870M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030g200270h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G201070H.fits 
 2 -- ft990812_2223_1040G202270H.fits 
 3 -- ft990812_2223_1040G202870H.fits 
 4 -- ft990812_2223_1040G203070H.fits 
 5 -- ft990812_2223_1040G203670H.fits 
 6 -- ft990812_2223_1040G204670H.fits 
 7 -- ft990812_2223_1040G205670H.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G201070H.fits 
 2 -- ft990812_2223_1040G202270H.fits 
 3 -- ft990812_2223_1040G202870H.fits 
 4 -- ft990812_2223_1040G203070H.fits 
 5 -- ft990812_2223_1040G203670H.fits 
 6 -- ft990812_2223_1040G204670H.fits 
 7 -- ft990812_2223_1040G205670H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030g200370l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G200270L.fits 
 2 -- ft990812_2223_1040G201270L.fits 
 3 -- ft990812_2223_1040G201770L.fits 
 4 -- ft990812_2223_1040G202070L.fits 
 5 -- ft990812_2223_1040G205270L.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G200270L.fits 
 2 -- ft990812_2223_1040G201270L.fits 
 3 -- ft990812_2223_1040G201770L.fits 
 4 -- ft990812_2223_1040G202070L.fits 
 5 -- ft990812_2223_1040G205270L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030g200470l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G201170L.fits 
 2 -- ft990812_2223_1040G201970L.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G201170L.fits 
 2 -- ft990812_2223_1040G201970L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 485 events ft990812_2223_1040G201570M.fits ft990812_2223_1040G202370M.fits ft990812_2223_1040G203170M.fits ft990812_2223_1040G205770M.fits
-> Ignoring the following files containing 132 events ft990812_2223_1040G205170L.fits
-> Ignoring the following files containing 90 events ft990812_2223_1040G200570M.fits ft990812_2223_1040G204170M.fits
-> Ignoring the following files containing 78 events ft990812_2223_1040G201470M.fits
-> Ignoring the following files containing 74 events ft990812_2223_1040G201370M.fits
-> Ignoring the following files containing 13 events ft990812_2223_1040G200970H.fits ft990812_2223_1040G202770H.fits ft990812_2223_1040G205570H.fits
-> Ignoring the following files containing 12 events ft990812_2223_1040G200770H.fits
-> Ignoring the following files containing 11 events ft990812_2223_1040G200870H.fits
-> Ignoring the following files containing 9 events ft990812_2223_1040G202970H.fits
-> Ignoring the following files containing 2 events ft990812_2223_1040G202570H.fits
-> Ignoring the following files containing 2 events ft990812_2223_1040G203770H.fits ft990812_2223_1040G204770H.fits
-> Ignoring the following files containing 2 events ft990812_2223_1040G205470H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G200470M.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G202670H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G203370H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G203470H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G204470H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G205370H.fits
-> Grouping g3 event files
-> stdout output from group_event_files
1 ft990812_2223_1040G300170M.fits 69950
1 ft990812_2223_1040G300670M.fits 69950
1 ft990812_2223_1040G301670M.fits 69950
1 ft990812_2223_1040G301870M.fits 69950
1 ft990812_2223_1040G302170M.fits 69950
1 ft990812_2223_1040G302470M.fits 69950
1 ft990812_2223_1040G303270M.fits 69950
1 ft990812_2223_1040G304270M.fits 69950
1 ft990812_2223_1040G305870M.fits 69950
2 ft990812_2223_1040G301070H.fits 54697
2 ft990812_2223_1040G302270H.fits 54697
2 ft990812_2223_1040G302870H.fits 54697
2 ft990812_2223_1040G303070H.fits 54697
2 ft990812_2223_1040G303670H.fits 54697
2 ft990812_2223_1040G304670H.fits 54697
2 ft990812_2223_1040G305670H.fits 54697
3 ft990812_2223_1040G300270L.fits 14533
3 ft990812_2223_1040G301270L.fits 14533
3 ft990812_2223_1040G301770L.fits 14533
3 ft990812_2223_1040G302070L.fits 14533
3 ft990812_2223_1040G305270L.fits 14533
4 ft990812_2223_1040G301170L.fits 975
4 ft990812_2223_1040G301970L.fits 975
5 ft990812_2223_1040G301570M.fits 509
5 ft990812_2223_1040G302370M.fits 509
5 ft990812_2223_1040G303170M.fits 509
5 ft990812_2223_1040G305770M.fits 509
6 ft990812_2223_1040G305170L.fits 118
7 ft990812_2223_1040G301370M.fits 85
8 ft990812_2223_1040G301470M.fits 85
9 ft990812_2223_1040G300570M.fits 50
10 ft990812_2223_1040G304170M.fits 38
11 ft990812_2223_1040G300870H.fits 11
12 ft990812_2223_1040G300970H.fits 11
12 ft990812_2223_1040G303570H.fits 11
12 ft990812_2223_1040G305570H.fits 11
13 ft990812_2223_1040G300770H.fits 10
14 ft990812_2223_1040G302970H.fits 7
15 ft990812_2223_1040G305370H.fits 2
16 ft990812_2223_1040G302670H.fits 1
17 ft990812_2223_1040G303370H.fits 1
18 ft990812_2223_1040G304470H.fits 1
19 ft990812_2223_1040G305470H.fits 1
-> Creating ad47016030g300170m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G300170M.fits 
 2 -- ft990812_2223_1040G300670M.fits 
 3 -- ft990812_2223_1040G301670M.fits 
 4 -- ft990812_2223_1040G301870M.fits 
 5 -- ft990812_2223_1040G302170M.fits 
 6 -- ft990812_2223_1040G302470M.fits 
 7 -- ft990812_2223_1040G303270M.fits 
 8 -- ft990812_2223_1040G304270M.fits 
 9 -- ft990812_2223_1040G305870M.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G300170M.fits 
 2 -- ft990812_2223_1040G300670M.fits 
 3 -- ft990812_2223_1040G301670M.fits 
 4 -- ft990812_2223_1040G301870M.fits 
 5 -- ft990812_2223_1040G302170M.fits 
 6 -- ft990812_2223_1040G302470M.fits 
 7 -- ft990812_2223_1040G303270M.fits 
 8 -- ft990812_2223_1040G304270M.fits 
 9 -- ft990812_2223_1040G305870M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030g300270h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G301070H.fits 
 2 -- ft990812_2223_1040G302270H.fits 
 3 -- ft990812_2223_1040G302870H.fits 
 4 -- ft990812_2223_1040G303070H.fits 
 5 -- ft990812_2223_1040G303670H.fits 
 6 -- ft990812_2223_1040G304670H.fits 
 7 -- ft990812_2223_1040G305670H.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G301070H.fits 
 2 -- ft990812_2223_1040G302270H.fits 
 3 -- ft990812_2223_1040G302870H.fits 
 4 -- ft990812_2223_1040G303070H.fits 
 5 -- ft990812_2223_1040G303670H.fits 
 6 -- ft990812_2223_1040G304670H.fits 
 7 -- ft990812_2223_1040G305670H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030g300370l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G300270L.fits 
 2 -- ft990812_2223_1040G301270L.fits 
 3 -- ft990812_2223_1040G301770L.fits 
 4 -- ft990812_2223_1040G302070L.fits 
 5 -- ft990812_2223_1040G305270L.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G300270L.fits 
 2 -- ft990812_2223_1040G301270L.fits 
 3 -- ft990812_2223_1040G301770L.fits 
 4 -- ft990812_2223_1040G302070L.fits 
 5 -- ft990812_2223_1040G305270L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030g300470l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G301170L.fits 
 2 -- ft990812_2223_1040G301970L.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G301170L.fits 
 2 -- ft990812_2223_1040G301970L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad47016030g300570m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft990812_2223_1040G301570M.fits 
 2 -- ft990812_2223_1040G302370M.fits 
 3 -- ft990812_2223_1040G303170M.fits 
 4 -- ft990812_2223_1040G305770M.fits 
Merging binary extension #: 2 
 1 -- ft990812_2223_1040G301570M.fits 
 2 -- ft990812_2223_1040G302370M.fits 
 3 -- ft990812_2223_1040G303170M.fits 
 4 -- ft990812_2223_1040G305770M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 118 events ft990812_2223_1040G305170L.fits
-> Ignoring the following files containing 85 events ft990812_2223_1040G301370M.fits
-> Ignoring the following files containing 85 events ft990812_2223_1040G301470M.fits
-> Ignoring the following files containing 50 events ft990812_2223_1040G300570M.fits
-> Ignoring the following files containing 38 events ft990812_2223_1040G304170M.fits
-> Ignoring the following files containing 11 events ft990812_2223_1040G300870H.fits
-> Ignoring the following files containing 11 events ft990812_2223_1040G300970H.fits ft990812_2223_1040G303570H.fits ft990812_2223_1040G305570H.fits
-> Ignoring the following files containing 10 events ft990812_2223_1040G300770H.fits
-> Ignoring the following files containing 7 events ft990812_2223_1040G302970H.fits
-> Ignoring the following files containing 2 events ft990812_2223_1040G305370H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G302670H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G303370H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G304470H.fits
-> Ignoring the following files containing 1 events ft990812_2223_1040G305470H.fits
-> stdout output from tar
a ft990812_2223_1040G200470M.fits 31K
a ft990812_2223_1040G200570M.fits 31K
a ft990812_2223_1040G200770H.fits 31K
a ft990812_2223_1040G200870H.fits 31K
a ft990812_2223_1040G200970H.fits 31K
a ft990812_2223_1040G201370M.fits 31K
a ft990812_2223_1040G201470M.fits 31K
a ft990812_2223_1040G201570M.fits 31K
a ft990812_2223_1040G202370M.fits 34K
a ft990812_2223_1040G202570H.fits 31K
a ft990812_2223_1040G202670H.fits 31K
a ft990812_2223_1040G202770H.fits 31K
a ft990812_2223_1040G202970H.fits 31K
a ft990812_2223_1040G203170M.fits 34K
a ft990812_2223_1040G203370H.fits 31K
a ft990812_2223_1040G203470H.fits 31K
a ft990812_2223_1040G203770H.fits 31K
a ft990812_2223_1040G204170M.fits 31K
a ft990812_2223_1040G204470H.fits 31K
a ft990812_2223_1040G204770H.fits 31K
a ft990812_2223_1040G205170L.fits 34K
a ft990812_2223_1040G205370H.fits 31K
a ft990812_2223_1040G205470H.fits 31K
a ft990812_2223_1040G205570H.fits 31K
a ft990812_2223_1040G205770M.fits 34K
a ft990812_2223_1040G300570M.fits 31K
a ft990812_2223_1040G300770H.fits 31K
a ft990812_2223_1040G300870H.fits 31K
a ft990812_2223_1040G300970H.fits 31K
a ft990812_2223_1040G301370M.fits 31K
a ft990812_2223_1040G301470M.fits 31K
a ft990812_2223_1040G302670H.fits 31K
a ft990812_2223_1040G302970H.fits 31K
a ft990812_2223_1040G303370H.fits 31K
a ft990812_2223_1040G303570H.fits 31K
a ft990812_2223_1040G304170M.fits 31K
a ft990812_2223_1040G304470H.fits 31K
a ft990812_2223_1040G305170L.fits 34K
a ft990812_2223_1040G305370H.fits 31K
a ft990812_2223_1040G305470H.fits 31K
a ft990812_2223_1040G305570H.fits 31K
a ft990812_2223_1040S002101L.fits 31K
a ft990812_2223_1040S102201L.fits 31K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (11:50:58)

-> Split threshold for SIS0=40, and SIS1=40
-> Fetching faintdfe.tbl
-> Calculating DFE values for ad47016030s000101m.unf with zerodef=1
-> Converting ad47016030s000101m.unf to ad47016030s000112m.unf
-> Calculating DFE values for ad47016030s000101m.unf with zerodef=2
-> Converting ad47016030s000101m.unf to ad47016030s000102m.unf
-> Calculating DFE values for ad47016030s000201h.unf with zerodef=1
-> Converting ad47016030s000201h.unf to ad47016030s000212h.unf
-> Calculating DFE values for ad47016030s000201h.unf with zerodef=2
-> Converting ad47016030s000201h.unf to ad47016030s000202h.unf
-> Calculating DFE values for ad47016030s000301l.unf with zerodef=1
-> Converting ad47016030s000301l.unf to ad47016030s000312l.unf
-> Calculating DFE values for ad47016030s000301l.unf with zerodef=2
-> Converting ad47016030s000301l.unf to ad47016030s000302l.unf
-> Calculating DFE values for ad47016030s100101m.unf with zerodef=1
-> Converting ad47016030s100101m.unf to ad47016030s100112m.unf
-> Calculating DFE values for ad47016030s100101m.unf with zerodef=2
-> Converting ad47016030s100101m.unf to ad47016030s100102m.unf
-> Calculating DFE values for ad47016030s100201h.unf with zerodef=1
-> Converting ad47016030s100201h.unf to ad47016030s100212h.unf
-> Calculating DFE values for ad47016030s100201h.unf with zerodef=2
-> Converting ad47016030s100201h.unf to ad47016030s100202h.unf
-> Calculating DFE values for ad47016030s100301l.unf with zerodef=1
-> Converting ad47016030s100301l.unf to ad47016030s100312l.unf
-> Calculating DFE values for ad47016030s100301l.unf with zerodef=2
-> Converting ad47016030s100301l.unf to ad47016030s100302l.unf

Calibrating the unfiltered event files (11:55:43)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft990812_2223_1040.ghf
-> stdout output from temp2gain
temp2gain V4.6
leapsec FITS data was successfully read

'ft990812_2223.1040' is successfully opened
Data Start Time is 208650241.19 (19990812 222357)
Time Margin 2.0 sec included
Sync error detected in 3201 th SF
Sync error detected in 3264 th SF
Sync error detected in 3430 th SF
Sync error detected in 3431 th SF
Sync error detected in 3448 th SF
Sync error detected in 3449 th SF
Sync error detected in 3471 th SF
Sync error detected in 3475 th SF
Sync error detected in 3479 th SF
Sync error detected in 4725 th SF
Sync error detected in 5018 th SF
Sync error detected in 5019 th SF
Sync error detected in 5020 th SF
Sync error detected in 5021 th SF
Sync error detected in 5022 th SF
Sync error detected in 5023 th SF
Sync error detected in 5026 th SF
'ft990812_2223.1040' EOF detected, sf=7614
Data End Time is 208694453.05 (19990813 104049)
Gain History is written in ft990812_2223_1040.ghf
-> Generating attitude correction table ad47016030_003_bp4.txt
-> Extracting info from ft990812_2223_1040CMHK.fits
-> Using BP4 between 88.8024948107538 and 101.46924431968
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad47016030g200170m.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad47016030g200170m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030g200270h.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47016030g200270h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030g200370l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47016030g200370l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030g200470l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47016030g200470l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad47016030g300170m.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad47016030g300170m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030g300270h.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47016030g300270h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030g300370l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47016030g300370l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030g300470l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47016030g300470l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad47016030g300570m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad47016030g300570m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000101m.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad47016030s000101m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000102m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000102m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000112m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000112m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000201h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000201h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000202h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000202h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000212h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000212h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000301l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000301l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000302l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000302l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s000312l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s000312l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100101m.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100101m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100102m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100102m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100112m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100112m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100201h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100201h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100202h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100202h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100212h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100212h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100301l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100301l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100302l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100302l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:
-> Preparing to run ascalin on ad47016030s100312l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad47016030s100312l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    208681161.59533
 Detected gap > 15min in attitude file:    208686177.57979
 
Detected gap > 15min in attitude file:

Creating filter files (12:4:46)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.255 to working directory
-> Creating ft990812_2223_1040.mkf
-> stdout output from mkfilter2
 
leapsec FITS data was successfully read

S0-HK file: ft990812_2223_1040S0HK.fits

S1-HK file: ft990812_2223_1040S1HK.fits

G2-HK file: ft990812_2223_1040G2HK.fits

G3-HK file: ft990812_2223_1040G3HK.fits

Date and time are: 1999-08-12 22:23:31  mjd=51402.933000

Orbit file name is frf.orbit.255

Epoch of Orbital Elements: 1999-08-09 21:00:00

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa990812_2223.1040

output FITS File: ft990812_2223_1040.mkf

mkfilter2: Warning, faQparam error: time= 2.086501631898e+08 outside range of attitude file

           Euler angles undefined for this bin

mkfilter2: Warning, faQparam error: time= 2.086501951898e+08 outside range of attitude file

           Euler angles undefined for this bin

Total 1385 Data bins were processed.
-> Adding deadtime to ft990812_2223_1040.mkf
-> Adding ad47016030_s0.dfe to ft990812_2223_1040.mkf
-> Adding ad47016030_s1.dfe to ft990812_2223_1040.mkf
-> Plotting quantities from ft990812_2223_1040.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (12:18:39)

-> Skipping ad47016030s000101m.unf because of mode
-> Filtering ad47016030s000102m.unf into ad47016030s000102m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   59.125181
 The mean of the selected column is                  14.781295
 The standard deviation of the selected column is    2.2145709
 The minimum of selected column is                   12.437538
 The maximum of selected column is                   17.781303
 The number of points used in calculation is                4
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>8.1 && S0_PIXL1<21.4 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.17E+05    76476 0100
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000102m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          73643       733              0     72910         0         0
 Writing events file
    733 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         73643       733              0     72910         0         0
   in  128.00     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          733
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               4         101
 Flickering pixels iter, pixels & cnts :   1           2           7
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :          733
 Number of image cts rejected (N, %) :          10814.73
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            6            0            0
 
 Image counts      :             0          733            0            0
 Image cts rejected:             0          108            0            0
 Image cts rej (%) :          0.00        14.73         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          733            0            0
 Total cts rejected:             0          108            0            0
 Total cts rej (%) :          0.00        14.73         0.00         0.00
 
 Number of clean counts accepted  :          625
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s000102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad47016030s000102m.evt use_events=no
Wrote cleaned events file to ad47016030s000102m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad47016030s000112m.unf into ad47016030s000112m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   59.125181
 The mean of the selected column is                  14.781295
 The standard deviation of the selected column is    2.2145709
 The minimum of selected column is                   12.437538
 The maximum of selected column is                   17.781303
 The number of points used in calculation is                4
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>8.1 && S0_PIXL1<21.4 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.17E+05    76673 0100
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000112m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          73837       736              0     73101         0         0
 Writing events file
    736 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         73837       736              0     73101         0         0
   in  128.00     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          736
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               4         101
 Flickering pixels iter, pixels & cnts :   1           2           7
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :          736
 Number of image cts rejected (N, %) :          10814.67
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            6            0            0
 
 Image counts      :             0          736            0            0
 Image cts rejected:             0          108            0            0
 Image cts rej (%) :          0.00        14.67         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          736            0            0
 Total cts rejected:             0          108            0            0
 Total cts rej (%) :          0.00        14.67         0.00         0.00
 
 Number of clean counts accepted  :          628
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s000112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad47016030s000112m.evt use_events=no
Wrote cleaned events file to ad47016030s000112m.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Skipping ad47016030s000201h.unf because of mode
-> Filtering ad47016030s000202h.unf into ad47016030s000202h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   6393.1271
 The mean of the selected column is                  26.201341
 The standard deviation of the selected column is    8.8792267
 The minimum of selected column is                   6.0338874
 The maximum of selected column is                   55.312675
 The number of points used in calculation is              244
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<52.8 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.13E+05    85044 0100
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000202h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          81755     54628              0     27127         0         0
 Writing events file
  54628 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         81755     54628              0     27127         0         0
   in  8060.4     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        54628
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        8018
 Flickering pixels iter, pixels & cnts :   1          19         167
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           25
 Number of (internal) image counts   :        54628
 Number of image cts rejected (N, %) :         818514.98
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           25            0            0
 
 Image counts      :             0        54628            0            0
 Image cts rejected:             0         8185            0            0
 Image cts rej (%) :          0.00        14.98         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        54628            0            0
 Total cts rejected:             0         8185            0            0
 Total cts rej (%) :          0.00        14.98         0.00         0.00
 
 Number of clean counts accepted  :        46443
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           25
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s000202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad47016030s000202h.evt use_events=no
Wrote cleaned events file to ad47016030s000202h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad47016030s000212h.unf into ad47016030s000212h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   6393.1271
 The mean of the selected column is                  26.201341
 The standard deviation of the selected column is    8.8792267
 The minimum of selected column is                   6.0338874
 The maximum of selected column is                   55.312675
 The number of points used in calculation is              244
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<52.8 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.13E+05    85262 0100
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000212h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          81992     54781              0     27211         0         0
 Writing events file
  54781 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         81992     54781              0     27211         0         0
   in  8060.4     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 File NEVENTS keyword value  :        54781
 Total counts in chip images :        54780
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        8018
 Flickering pixels iter, pixels & cnts :   1          19         167
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           25
 Number of (internal) image counts   :        54780
 Number of image cts rejected (N, %) :         818514.94
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           25            0            0
 
 Image counts      :             0        54780            0            0
 Image cts rejected:             0         8185            0            0
 Image cts rej (%) :          0.00        14.94         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        54781            0            0
 Total cts rejected:             0         8185            0            0
 Total cts rej (%) :          0.00        14.94         0.00         0.00
 
 Number of clean counts accepted  :        46596
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           25
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s000212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad47016030s000212h.evt use_events=no
Wrote cleaned events file to ad47016030s000212h.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Skipping ad47016030s000301l.unf because of mode
-> Filtering ad47016030s000302l.unf into ad47016030s000302l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      LOW         1999-08-12  22:27:39    0.90E+04     2928 0100
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad47016030s000302l.evt use_events=no
Wrote cleaned events file to ad47016030s000302l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting ad47016030s000302l.evt since it contains 0 events
-> Filtering ad47016030s000312l.unf into ad47016030s000312l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     LOW         1999-08-12  22:27:39    0.90E+04     2969 0100
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad47016030s000312l.evt use_events=no
Wrote cleaned events file to ad47016030s000312l.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Deleting ad47016030s000312l.evt since it contains 0 events
-> Skipping ad47016030s100101m.unf because of mode
-> Filtering ad47016030s100102m.unf into ad47016030s100102m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   102.18781
 The mean of the selected column is                  25.546954
 The standard deviation of the selected column is    9.8088294
 The minimum of selected column is                   19.625061
 The maximum of selected column is                   40.218872
 The number of points used in calculation is                4
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<54.9 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.17E+05    79968 0001
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100102m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          70269       663              0     69606         0         0
 Writing events file
    663 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         70269       663              0     69606         0         0
   in  128.00     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          663
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               5         142
 Flickering pixels iter, pixels & cnts :   1           3          14
 
 Number of pixels rejected           :            8
 Number of (internal) image counts   :          663
 Number of image cts rejected (N, %) :          15623.53
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            8
 
 Image counts      :             0            0            0          663
 Image cts rejected:             0            0            0          156
 Image cts rej (%) :          0.00         0.00         0.00        23.53
 
    filtering data...
 
 Total counts      :             0            0            0          663
 Total cts rejected:             0            0            0          156
 Total cts rej (%) :          0.00         0.00         0.00        23.53
 
 Number of clean counts accepted  :          507
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            8
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s100102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad47016030s100102m.evt use_events=no
Wrote cleaned events file to ad47016030s100102m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad47016030s100112m.unf into ad47016030s100112m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   102.18781
 The mean of the selected column is                  25.546954
 The standard deviation of the selected column is    9.8088294
 The minimum of selected column is                   19.625061
 The maximum of selected column is                   40.218872
 The number of points used in calculation is                4
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<54.9 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.17E+05    80126 0001
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100112m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          70443       663              0     69780         0         0
 Writing events file
    663 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         70443       663              0     69780         0         0
   in  128.00     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          663
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               5         142
 Flickering pixels iter, pixels & cnts :   1           3          14
 
 Number of pixels rejected           :            8
 Number of (internal) image counts   :          663
 Number of image cts rejected (N, %) :          15623.53
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            8
 
 Image counts      :             0            0            0          663
 Image cts rejected:             0            0            0          156
 Image cts rej (%) :          0.00         0.00         0.00        23.53
 
    filtering data...
 
 Total counts      :             0            0            0          663
 Total cts rejected:             0            0            0          156
 Total cts rej (%) :          0.00         0.00         0.00        23.53
 
 Number of clean counts accepted  :          507
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            8
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s100112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad47016030s100112m.evt use_events=no
Wrote cleaned events file to ad47016030s100112m.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Skipping ad47016030s100201h.unf because of mode
-> Filtering ad47016030s100202h.unf into ad47016030s100202h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   8690.0481
 The mean of the selected column is                  35.614951
 The standard deviation of the selected column is    12.671674
 The minimum of selected column is                   8.5110540
 The maximum of selected column is                   80.312744
 The number of points used in calculation is              244
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<73.6 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.13E+05    78243 0001
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100202h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          69919     46454              0     23465         0         0
 Writing events file
  46454 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         69919     46454              0     23465         0         0
   in  7992.2     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        46454
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               8        9589
 Flickering pixels iter, pixels & cnts :   1          16         139
 
 Number of pixels rejected           :           24
 Number of (internal) image counts   :        46454
 Number of image cts rejected (N, %) :         972820.94
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           24
 
 Image counts      :             0            0            0        46454
 Image cts rejected:             0            0            0         9728
 Image cts rej (%) :          0.00         0.00         0.00        20.94
 
    filtering data...
 
 Total counts      :             0            0            0        46454
 Total cts rejected:             0            0            0         9728
 Total cts rej (%) :          0.00         0.00         0.00        20.94
 
 Number of clean counts accepted  :        36726
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           24
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s100202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad47016030s100202h.evt use_events=no
Wrote cleaned events file to ad47016030s100202h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad47016030s100212h.unf into ad47016030s100212h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   8690.0481
 The mean of the selected column is                  35.614951
 The standard deviation of the selected column is    12.671674
 The minimum of selected column is                   8.5110540
 The maximum of selected column is                   80.312744
 The number of points used in calculation is              244
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<73.6 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.13E+05    78388 0001
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100212h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          70094     46559              0     23535         0         0
 Writing events file
  46559 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         70094     46559              0     23535         0         0
   in  7992.2     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        46559
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               8        9601
 Flickering pixels iter, pixels & cnts :   1          15         134
 
 Number of pixels rejected           :           23
 Number of (internal) image counts   :        46559
 Number of image cts rejected (N, %) :         973520.91
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           23
 
 Image counts      :             0            0            0        46559
 Image cts rejected:             0            0            0         9735
 Image cts rej (%) :          0.00         0.00         0.00        20.91
 
    filtering data...
 
 Total counts      :             0            0            0        46559
 Total cts rejected:             0            0            0         9735
 Total cts rej (%) :          0.00         0.00         0.00        20.91
 
 Number of clean counts accepted  :        36824
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           23
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s100212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad47016030s100212h.evt use_events=no
Wrote cleaned events file to ad47016030s100212h.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Skipping ad47016030s100301l.unf because of mode
-> Filtering ad47016030s100302l.unf into ad47016030s100302l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      LOW         1999-08-12  22:27:39    0.90E+04     6098 0001
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad47016030s100302l.evt use_events=no
Wrote cleaned events file to ad47016030s100302l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting ad47016030s100302l.evt since it contains 0 events
-> Filtering ad47016030s100312l.unf into ad47016030s100312l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     LOW         1999-08-12  22:27:39    0.90E+04     6138 0001
Processing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_47016030.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_47016030.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad47016030s100312l.evt use_events=no
Wrote cleaned events file to ad47016030s100312l.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Deleting ad47016030s100312l.evt since it contains 0 events
-> Filtering ad47016030g200170m.unf into ad47016030g200170m.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    64150     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          64150     39259           9940     14951         0         0
 Writing events file
  39259 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         64150     39259           9940     14951         0         0
   in  9695.9     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       39259               38667               592
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47016030g200170m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Filtering ad47016030g200270h.unf into ad47016030g200270h.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    49395     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49395     39239           5417      4739         0         0
 Writing events file
  39239 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         49395     39239           5417      4739         0         0
   in  9682.1     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       39239               38618               621
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g200270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47016030g200270h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Filtering ad47016030g200370l.unf into ad47016030g200370l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14683     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200370l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47016030g200370l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad47016030g200370l.evt since it contains 0 events
-> Filtering ad47016030g200470l.unf into ad47016030g200470l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      989     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200470l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g200470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad47016030g200470l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad47016030g200470l.evt since it contains 0 events
-> Filtering ad47016030g300170m.unf into ad47016030g300170m.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          69950     45406           8093     16451         0         0
 Writing events file
  45406 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         69950     45406           8093     16451         0         0
   in  9695.9     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       45406               44823               583
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47016030g300170m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Filtering ad47016030g300270h.unf into ad47016030g300270h.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    54697     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          54697     45001           4436      5260         0         0
 Writing events file
  45001 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         54697     45001           4436      5260         0         0
   in  9682.1     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       45001               44380               621
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g300270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47016030g300270h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Filtering ad47016030g300370l.unf into ad47016030g300370l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14533     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300370l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47016030g300370l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad47016030g300370l.evt since it contains 0 events
-> Filtering ad47016030g300470l.unf into ad47016030g300470l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      975     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300470l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g300470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47016030g300470l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad47016030g300470l.evt since it contains 0 events
-> Filtering ad47016030g300570m.unf into ad47016030g300570m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-13  00:18:11    0.11E+03      509     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            509       132             85       292         0         0
 Writing events file
    132 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           509       132             85       292         0         0
   in  32.000     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         132                 129                 3
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA > read events ad47016030g300570m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad47016030g300570m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

Generating images and exposure maps (12:37:31)

-> Generating exposure map ad47016030g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:
-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47016030g200170m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030g200170m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2816
 Mean   RA/DEC/ROLL :       26.6460      61.8087     298.2816
 Pnt    RA/DEC/ROLL :       26.7637      61.8532     298.2816
 
 Image rebin factor :             1
 Attitude Records   :         30157
 GTI intervals      :             6
 Total GTI (secs)   :      9695.929
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1154.99      1154.99
  20 Percent Complete: Total/live time:       2102.97      2102.97
  30 Percent Complete: Total/live time:       3706.96      3706.96
  40 Percent Complete: Total/live time:       4847.99      4847.99
  50 Percent Complete: Total/live time:       6066.95      6066.95
  60 Percent Complete: Total/live time:       6066.95      6066.95
  70 Percent Complete: Total/live time:       7322.94      7322.94
  80 Percent Complete: Total/live time:       8399.99      8399.99
  90 Percent Complete: Total/live time:       8991.93      8991.93
 100 Percent Complete: Total/live time:       9695.93      9695.93
 
 Number of attitude steps  used:           43
 Number of attitude steps avail:         4110
 Mean RA/DEC pixel offset:      -13.3311      -2.9295
 
    writing expo file: ad47016030g200170.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030g200170m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030g200170m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    38667     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38667     38588             79         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38667     38588             79         0         0         0
   in  9695.9     seconds
 Image            has    38588 counts for  3.980     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38667     25132             79         0         0     13456
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38667     25132             79         0         0     13456
   in  9695.9     seconds
 Image            has    25132 counts for  2.592     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38667     13697             79         0         0     24891
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38667     13697             79         0         0     24891
   in  9695.9     seconds
 Image            has    13697 counts for  1.413     counts/sec
 Command not found; type ? for a command listing
!ad47016030g200170m:ASCA >
!ad47016030g200170m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030g200170m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g200170m:ASCA > read events ad47016030g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g200170m:ASCA-GIS2-PH > set image sky
!ad47016030g200170m:ASCA-GIS2-PH > filter region corner_point.reg
!ad47016030g200170m:ASCA-GIS2-PH > extract image
!ad47016030g200170m:ASCA-GIS2-PH > save image outfile=ad47016030g200170_all.img
Wrote image to file ad47016030g200170_all.img
!ad47016030g200170m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad47016030g200170m:ASCA-GIS2-PH > extract image
!ad47016030g200170m:ASCA-GIS2-PH > save image outfile=ad47016030g200170_lo.img
Wrote image to file ad47016030g200170_lo.img
!ad47016030g200170m:ASCA-GIS2-PH > clear pha_cut
!ad47016030g200170m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47016030g200170m:ASCA-GIS2-PH > extract image
!ad47016030g200170m:ASCA-GIS2-PH > save image outfile=ad47016030g200170_hi.img
Wrote image to file ad47016030g200170_hi.img
!ad47016030g200170m:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad47016030g200270.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47016030g200270h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030g200270h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2828
 Mean   RA/DEC/ROLL :       26.6487      61.8088     298.2828
 Pnt    RA/DEC/ROLL :       26.6163      61.8585     298.2828
 
 Image rebin factor :             1
 Attitude Records   :         30157
 GTI intervals      :            35
 Total GTI (secs)   :      9682.113
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1327.51      1327.51
  20 Percent Complete: Total/live time:       4079.57      4079.57
  30 Percent Complete: Total/live time:       4079.57      4079.57
  40 Percent Complete: Total/live time:       4084.57      4084.57
  50 Percent Complete: Total/live time:       5784.15      5784.15
  60 Percent Complete: Total/live time:       6912.24      6912.24
  70 Percent Complete: Total/live time:       6912.24      6912.24
  80 Percent Complete: Total/live time:       7970.24      7970.24
  90 Percent Complete: Total/live time:       9530.61      9530.61
 100 Percent Complete: Total/live time:       9682.11      9682.11
 
 Number of attitude steps  used:           20
 Number of attitude steps avail:        25085
 Mean RA/DEC pixel offset:      -12.3069      -2.8305
 
    writing expo file: ad47016030g200270.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030g200270h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030g200270h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.97E+04    38618     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38618     38542             76         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38618     38542             76         0         0         0
   in  9682.1     seconds
 Image            has    38542 counts for  3.981     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38618     25247             76         0         0     13295
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38618     25247             76         0         0     13295
   in  9682.1     seconds
 Image            has    25247 counts for  2.608     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38618     13546             76         0         0     24996
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38618     13546             76         0         0     24996
   in  9682.1     seconds
 Image            has    13546 counts for  1.399     counts/sec
 Command not found; type ? for a command listing
!ad47016030g200270h:ASCA >
!ad47016030g200270h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030g200270h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g200270h:ASCA > read events ad47016030g200270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g200270h:ASCA-GIS2-PH > set image sky
!ad47016030g200270h:ASCA-GIS2-PH > filter region corner_point.reg
!ad47016030g200270h:ASCA-GIS2-PH > extract image
!ad47016030g200270h:ASCA-GIS2-PH > save image outfile=ad47016030g200270_all.img
Wrote image to file ad47016030g200270_all.img
!ad47016030g200270h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad47016030g200270h:ASCA-GIS2-PH > extract image
!ad47016030g200270h:ASCA-GIS2-PH > save image outfile=ad47016030g200270_lo.img
Wrote image to file ad47016030g200270_lo.img
!ad47016030g200270h:ASCA-GIS2-PH > clear pha_cut
!ad47016030g200270h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47016030g200270h:ASCA-GIS2-PH > extract image
!ad47016030g200270h:ASCA-GIS2-PH > save image outfile=ad47016030g200270_hi.img
Wrote image to file ad47016030g200270_hi.img
!ad47016030g200270h:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad47016030g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:
-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47016030g300170m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030g300170m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2638
 Mean   RA/DEC/ROLL :       26.6263      61.8316     298.2638
 Pnt    RA/DEC/ROLL :       26.7838      61.8303     298.2638
 
 Image rebin factor :             1
 Attitude Records   :         30157
 GTI intervals      :             6
 Total GTI (secs)   :      9695.929
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1154.99      1154.99
  20 Percent Complete: Total/live time:       2102.97      2102.97
  30 Percent Complete: Total/live time:       3706.96      3706.96
  40 Percent Complete: Total/live time:       4847.99      4847.99
  50 Percent Complete: Total/live time:       6066.95      6066.95
  60 Percent Complete: Total/live time:       6066.95      6066.95
  70 Percent Complete: Total/live time:       7322.94      7322.94
  80 Percent Complete: Total/live time:       8399.99      8399.99
  90 Percent Complete: Total/live time:       8991.93      8991.93
 100 Percent Complete: Total/live time:       9695.93      9695.93
 
 Number of attitude steps  used:           43
 Number of attitude steps avail:         4110
 Mean RA/DEC pixel offset:       -1.2525      -1.7296
 
    writing expo file: ad47016030g300170.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030g300170m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030g300170m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    44823     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44823     44743             80         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44823     44743             80         0         0         0
   in  9695.9     seconds
 Image            has    44743 counts for  4.615     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44823     29043             80         0         0     15700
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44823     29043             80         0         0     15700
   in  9695.9     seconds
 Image            has    29043 counts for  2.995     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44823     15963             80         0         0     28780
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44823     15963             80         0         0     28780
   in  9695.9     seconds
 Image            has    15963 counts for  1.646     counts/sec
 Command not found; type ? for a command listing
!ad47016030g300170m:ASCA >
!ad47016030g300170m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030g300170m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g300170m:ASCA > read events ad47016030g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g300170m:ASCA-GIS3-PH > set image sky
!ad47016030g300170m:ASCA-GIS3-PH > filter region corner_point.reg
!ad47016030g300170m:ASCA-GIS3-PH > extract image
!ad47016030g300170m:ASCA-GIS3-PH > save image outfile=ad47016030g300170_all.img
Wrote image to file ad47016030g300170_all.img
!ad47016030g300170m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad47016030g300170m:ASCA-GIS3-PH > extract image
!ad47016030g300170m:ASCA-GIS3-PH > save image outfile=ad47016030g300170_lo.img
Wrote image to file ad47016030g300170_lo.img
!ad47016030g300170m:ASCA-GIS3-PH > clear pha_cut
!ad47016030g300170m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47016030g300170m:ASCA-GIS3-PH > extract image
!ad47016030g300170m:ASCA-GIS3-PH > save image outfile=ad47016030g300170_hi.img
Wrote image to file ad47016030g300170_hi.img
!ad47016030g300170m:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad47016030g300270.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47016030g300270h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030g300270h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2650
 Mean   RA/DEC/ROLL :       26.6285      61.8317     298.2650
 Pnt    RA/DEC/ROLL :       26.6365      61.8356     298.2650
 
 Image rebin factor :             1
 Attitude Records   :         30157
 GTI intervals      :            35
 Total GTI (secs)   :      9682.113
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1327.51      1327.51
  20 Percent Complete: Total/live time:       4079.57      4079.57
  30 Percent Complete: Total/live time:       4079.57      4079.57
  40 Percent Complete: Total/live time:       4084.57      4084.57
  50 Percent Complete: Total/live time:       5784.15      5784.15
  60 Percent Complete: Total/live time:       6912.24      6912.24
  70 Percent Complete: Total/live time:       6912.24      6912.24
  80 Percent Complete: Total/live time:       7970.24      7970.24
  90 Percent Complete: Total/live time:       9530.61      9530.61
 100 Percent Complete: Total/live time:       9682.11      9682.11
 
 Number of attitude steps  used:           20
 Number of attitude steps avail:        25085
 Mean RA/DEC pixel offset:       -0.8322      -1.6906
 
    writing expo file: ad47016030g300270.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030g300270h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030g300270h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.97E+04    44380     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44380     44312             68         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44380     44312             68         0         0         0
   in  9682.1     seconds
 Image            has    44312 counts for  4.577     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44380     28905             68         0         0     15407
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44380     28905             68         0         0     15407
   in  9682.1     seconds
 Image            has    28905 counts for  2.985     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44380     15651             68         0         0     28661
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44380     15651             68         0         0     28661
   in  9682.1     seconds
 Image            has    15651 counts for  1.616     counts/sec
 Command not found; type ? for a command listing
!ad47016030g300270h:ASCA >
!ad47016030g300270h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030g300270h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g300270h:ASCA > read events ad47016030g300270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g300270h:ASCA-GIS3-PH > set image sky
!ad47016030g300270h:ASCA-GIS3-PH > filter region corner_point.reg
!ad47016030g300270h:ASCA-GIS3-PH > extract image
!ad47016030g300270h:ASCA-GIS3-PH > save image outfile=ad47016030g300270_all.img
Wrote image to file ad47016030g300270_all.img
!ad47016030g300270h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad47016030g300270h:ASCA-GIS3-PH > extract image
!ad47016030g300270h:ASCA-GIS3-PH > save image outfile=ad47016030g300270_lo.img
Wrote image to file ad47016030g300270_lo.img
!ad47016030g300270h:ASCA-GIS3-PH > clear pha_cut
!ad47016030g300270h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47016030g300270h:ASCA-GIS3-PH > extract image
!ad47016030g300270h:ASCA-GIS3-PH > save image outfile=ad47016030g300270_hi.img
Wrote image to file ad47016030g300270_hi.img
!ad47016030g300270h:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad47016030g300570.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad47016030g300570m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030g300570m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2639
 Mean   RA/DEC/ROLL :       26.6312      61.8319     298.2639
 Pnt    RA/DEC/ROLL :       26.6292      61.8353     298.2639
 
 Image rebin factor :             1
 Attitude Records   :         30157
 GTI intervals      :             1
 Total GTI (secs)   :        32.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         11.00        11.00
  20 Percent Complete: Total/live time:         32.00        32.00
 100 Percent Complete: Total/live time:         32.00        32.00
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:           26
 Mean RA/DEC pixel offset:       -0.4239      -1.1910
 
    writing expo file: ad47016030g300570.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030g300570m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030g300570m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-13  00:18:11    0.32E+02      129     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            129       128              1         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           129       128              1         0         0         0
   in  32.000     seconds
 Image            has      128 counts for  4.000     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            129        82              1         0         0        46
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           129        82              1         0         0        46
   in  32.000     seconds
 Image            has       82 counts for  2.563     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            129        47              1         0         0        81
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           129        47              1         0         0        81
   in  32.000     seconds
 Image            has       47 counts for  1.469     counts/sec
 Command not found; type ? for a command listing
!ad47016030g300570m:ASCA >
!ad47016030g300570m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030g300570m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g300570m:ASCA > read events ad47016030g300570m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030g300570m:ASCA-GIS3-PH > set image sky
!ad47016030g300570m:ASCA-GIS3-PH > filter region corner_point.reg
!ad47016030g300570m:ASCA-GIS3-PH > extract image
!ad47016030g300570m:ASCA-GIS3-PH > save image outfile=ad47016030g300570_all.img
Wrote image to file ad47016030g300570_all.img
!ad47016030g300570m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad47016030g300570m:ASCA-GIS3-PH > extract image
!ad47016030g300570m:ASCA-GIS3-PH > save image outfile=ad47016030g300570_lo.img
Wrote image to file ad47016030g300570_lo.img
!ad47016030g300570m:ASCA-GIS3-PH > clear pha_cut
!ad47016030g300570m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad47016030g300570m:ASCA-GIS3-PH > extract image
!ad47016030g300570m:ASCA-GIS3-PH > save image outfile=ad47016030g300570_hi.img
Wrote image to file ad47016030g300570_hi.img
!ad47016030g300570m:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad47016030s000102.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47016030s000102m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030s000102m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2474
 Mean   RA/DEC/ROLL :       26.6068      61.8129     298.2474
 Pnt    RA/DEC/ROLL :       26.8025      61.8489     298.2474
 
 Image rebin factor :             4
 Attitude Records   :         30157
 Hot Pixels         :             6
 GTI intervals      :             4
 Total GTI (secs)   :       128.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         32.00        32.00
  20 Percent Complete: Total/live time:         32.00        32.00
  30 Percent Complete: Total/live time:         64.00        64.00
  40 Percent Complete: Total/live time:         64.00        64.00
  50 Percent Complete: Total/live time:         66.95        66.95
  60 Percent Complete: Total/live time:        128.00       128.00
 100 Percent Complete: Total/live time:        128.00       128.00
 
 Number of attitude steps  used:            6
 Number of attitude steps avail:          230
 Mean RA/DEC pixel offset:      -58.5340     -68.5378
 
    writing expo file: ad47016030s000102.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030s000102m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030s000102m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      625 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            625       625              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           625       625              0         0         0         0
   in  128.00     seconds
 Image            has      625 counts for  4.883     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            625       468              0         0         0       157
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           625       468              0         0         0       157
   in  128.00     seconds
 Image            has      468 counts for  3.656     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            625       157              0         0         0       468
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           625       157              0         0         0       468
   in  128.00     seconds
 Image            has      157 counts for  1.227     counts/sec
 Command not found; type ? for a command listing
!ad47016030s000102m:ASCA >
!ad47016030s000102m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030s000102m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s000102m:ASCA > read events ad47016030s000102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s000102m:ASCA-SIS0-BRIGHT > set image sky
!ad47016030s000102m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad47016030s000102m:ASCA-SIS0-BRIGHT > extract image
!ad47016030s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad47016030s000102_all.img
Wrote image to file ad47016030s000102_all.img
!ad47016030s000102m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad47016030s000102m:ASCA-SIS0-BRIGHT > extract image
!ad47016030s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad47016030s000102_lo.img
Wrote image to file ad47016030s000102_lo.img
!ad47016030s000102m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad47016030s000102m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47016030s000102m:ASCA-SIS0-BRIGHT > extract image
!ad47016030s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad47016030s000102_hi.img
Wrote image to file ad47016030s000102_hi.img
!ad47016030s000102m:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad47016030s000202.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47016030s000202h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030s000202h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2487
 Mean   RA/DEC/ROLL :       26.6100      61.8131     298.2487
 Pnt    RA/DEC/ROLL :       26.6553      61.8535     298.2487
 
 Image rebin factor :             4
 Attitude Records   :         30157
 Hot Pixels         :            25
 GTI intervals      :            33
 Total GTI (secs)   :      8060.434
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        919.44       919.44
  20 Percent Complete: Total/live time:       3168.00      3168.00
  30 Percent Complete: Total/live time:       3168.00      3168.00
  40 Percent Complete: Total/live time:       4564.20      4564.20
  50 Percent Complete: Total/live time:       4564.20      4564.20
  60 Percent Complete: Total/live time:       5672.43      5672.43
  70 Percent Complete: Total/live time:       6748.43      6748.43
  80 Percent Complete: Total/live time:       6748.43      6748.43
  90 Percent Complete: Total/live time:       8060.43      8060.43
 100 Percent Complete: Total/live time:       8060.43      8060.43
 
 Number of attitude steps  used:           18
 Number of attitude steps avail:        22985
 Mean RA/DEC pixel offset:      -61.0846     -85.2921
 
    writing expo file: ad47016030s000202.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030s000202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030s000202h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.81E+04    46443 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          46443     46443              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         46443     46443              0         0         0         0
   in  8060.4     seconds
 Image            has    46443 counts for  5.762     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          46443     33630              0         0         0     12813
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         46443     33630              0         0         0     12813
   in  8060.4     seconds
 Image            has    33630 counts for  4.172     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          46443     12866              0         0         0     33577
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         46443     12866              0         0         0     33577
   in  8060.4     seconds
 Image            has    12866 counts for  1.596     counts/sec
 Command not found; type ? for a command listing
!ad47016030s000202h:ASCA >
!ad47016030s000202h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030s000202h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s000202h:ASCA > read events ad47016030s000202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s000202h:ASCA-SIS0-BRIGHT > set image sky
!ad47016030s000202h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad47016030s000202h:ASCA-SIS0-BRIGHT > extract image
!ad47016030s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad47016030s000202_all.img
Wrote image to file ad47016030s000202_all.img
!ad47016030s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad47016030s000202h:ASCA-SIS0-BRIGHT > extract image
!ad47016030s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad47016030s000202_lo.img
Wrote image to file ad47016030s000202_lo.img
!ad47016030s000202h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad47016030s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47016030s000202h:ASCA-SIS0-BRIGHT > extract image
!ad47016030s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad47016030s000202_hi.img
Wrote image to file ad47016030s000202_hi.img
!ad47016030s000202h:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad47016030s100102.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47016030s100102m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030s100102m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2744
 Mean   RA/DEC/ROLL :       26.6367      61.8196     298.2744
 Pnt    RA/DEC/ROLL :       26.7718      61.8423     298.2744
 
 Image rebin factor :             4
 Attitude Records   :         30157
 Hot Pixels         :             8
 GTI intervals      :             4
 Total GTI (secs)   :       128.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         30.97        30.97
  20 Percent Complete: Total/live time:         30.97        30.97
  30 Percent Complete: Total/live time:         42.97        42.97
  40 Percent Complete: Total/live time:         62.97        62.97
  50 Percent Complete: Total/live time:         96.00        96.00
  60 Percent Complete: Total/live time:         96.00        96.00
  70 Percent Complete: Total/live time:         98.94        98.94
  80 Percent Complete: Total/live time:        128.00       128.00
 100 Percent Complete: Total/live time:        128.00       128.00
 
 Number of attitude steps  used:           11
 Number of attitude steps avail:          289
 Mean RA/DEC pixel offset:      -60.5604     -20.9127
 
    writing expo file: ad47016030s100102.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030s100102m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030s100102m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      507 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            507       507              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           507       507              0         0         0         0
   in  128.00     seconds
 Image            has      507 counts for  3.961     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            507       378              0         0         0       129
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           507       378              0         0         0       129
   in  128.00     seconds
 Image            has      378 counts for  2.953     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            507       131              0         0         0       376
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           507       131              0         0         0       376
   in  128.00     seconds
 Image            has      131 counts for  1.023     counts/sec
 Command not found; type ? for a command listing
!ad47016030s100102m:ASCA >
!ad47016030s100102m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030s100102m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s100102m:ASCA > read events ad47016030s100102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s100102m:ASCA-SIS1-BRIGHT > set image sky
!ad47016030s100102m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad47016030s100102m:ASCA-SIS1-BRIGHT > extract image
!ad47016030s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad47016030s100102_all.img
Wrote image to file ad47016030s100102_all.img
!ad47016030s100102m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad47016030s100102m:ASCA-SIS1-BRIGHT > extract image
!ad47016030s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad47016030s100102_lo.img
Wrote image to file ad47016030s100102_lo.img
!ad47016030s100102m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad47016030s100102m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47016030s100102m:ASCA-SIS1-BRIGHT > extract image
!ad47016030s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad47016030s100102_hi.img
Wrote image to file ad47016030s100102_hi.img
!ad47016030s100102m:ASCA-SIS1-BRIGHT > exit save_session=no
-> Generating exposure map ad47016030s100202.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad47016030s100202h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad47016030s100202h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990812_2223.1040
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       26.6374      61.8354     298.2756
 Mean   RA/DEC/ROLL :       26.6406      61.8198     298.2756
 Pnt    RA/DEC/ROLL :       26.6247      61.8469     298.2756
 
 Image rebin factor :             4
 Attitude Records   :         30157
 Hot Pixels         :            24
 GTI intervals      :            38
 Total GTI (secs)   :      7992.231
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        919.44       919.44
  20 Percent Complete: Total/live time:       3104.00      3104.00
  30 Percent Complete: Total/live time:       3104.00      3104.00
  40 Percent Complete: Total/live time:       4488.00      4488.00
  50 Percent Complete: Total/live time:       4488.00      4488.00
  60 Percent Complete: Total/live time:       5600.23      5600.23
  70 Percent Complete: Total/live time:       6680.23      6680.23
  80 Percent Complete: Total/live time:       6680.23      6680.23
  90 Percent Complete: Total/live time:       7992.23      7992.23
 100 Percent Complete: Total/live time:       7992.23      7992.23
 
 Number of attitude steps  used:           18
 Number of attitude steps avail:        22986
 Mean RA/DEC pixel offset:      -65.2820     -17.4327
 
    writing expo file: ad47016030s100202.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad47016030s100202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad47016030s100202h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.80E+04    36726 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36726     36726              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36726     36726              0         0         0         0
   in  7992.2     seconds
 Image            has    36726 counts for  4.595     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36726     27026              0         0         0      9700
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36726     27026              0         0         0      9700
   in  7992.2     seconds
 Image            has    27026 counts for  3.382     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36726      9743              0         0         0     26983
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36726      9743              0         0         0     26983
   in  7992.2     seconds
 Image            has     9743 counts for  1.219     counts/sec
 Command not found; type ? for a command listing
!ad47016030s100202h:ASCA >
!ad47016030s100202h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad47016030s100202h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s100202h:ASCA > read events ad47016030s100202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!ad47016030s100202h:ASCA-SIS1-BRIGHT > set image sky
!ad47016030s100202h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad47016030s100202h:ASCA-SIS1-BRIGHT > extract image
!ad47016030s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad47016030s100202_all.img
Wrote image to file ad47016030s100202_all.img
!ad47016030s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad47016030s100202h:ASCA-SIS1-BRIGHT > extract image
!ad47016030s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad47016030s100202_lo.img
Wrote image to file ad47016030s100202_lo.img
!ad47016030s100202h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad47016030s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad47016030s100202h:ASCA-SIS1-BRIGHT > extract image
!ad47016030s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad47016030s100202_hi.img
Wrote image to file ad47016030s100202_hi.img
!ad47016030s100202h:ASCA-SIS1-BRIGHT > exit save_session=no
-> Summing sis images
-> Exposure for ad47016030s000102.expo is 128.000000 seconds
-> Exposure for ad47016030s000202.expo is 8060.434570 seconds
-> Exposure for ad47016030s100102.expo is 128.000000 seconds
-> Exposure for ad47016030s100202.expo is 7992.231445 seconds
-> Summing the following images to produce ad47016030sis32002.totexpo
ad47016030s000102.expo
ad47016030s000202.expo
ad47016030s100102.expo
ad47016030s100202.expo
-> Setting EXPOSURE=16308.666015 in ad47016030sis32002.totexpo
-> Exposure for ad47016030s000102_all.img is 1.280000000000000E+02 seconds
-> ad47016030s000102_all.img has 625 counts
-> Exposure for ad47016030s000202_all.img is 8.060433648169041E+03 seconds
-> ad47016030s000202_all.img has 46443 counts
-> Exposure for ad47016030s100102_all.img is 1.280000000000000E+02 seconds
-> ad47016030s100102_all.img has 507 counts
-> Exposure for ad47016030s100202_all.img is 7.992230599761009E+03 seconds
-> ad47016030s100202_all.img has 36726 counts
-> Summing the following images to produce ad47016030sis32002_all.totsky
ad47016030s000102_all.img
ad47016030s000202_all.img
ad47016030s100102_all.img
ad47016030s100202_all.img
-> Setting EXPOSURE=16308.66424793 in ad47016030sis32002_all.totsky
-> Setting TOTCTS=84301 in ad47016030sis32002_all.totsky
-> Exposure for ad47016030s000102_lo.img is 1.280000000000000E+02 seconds
-> ad47016030s000102_lo.img has 468 counts
-> Exposure for ad47016030s000202_lo.img is 8.060433648169041E+03 seconds
-> ad47016030s000202_lo.img has 33630 counts
-> Exposure for ad47016030s100102_lo.img is 1.280000000000000E+02 seconds
-> ad47016030s100102_lo.img has 378 counts
-> Exposure for ad47016030s100202_lo.img is 7.992230599761009E+03 seconds
-> ad47016030s100202_lo.img has 27026 counts
-> Summing the following images to produce ad47016030sis32002_lo.totsky
ad47016030s000102_lo.img
ad47016030s000202_lo.img
ad47016030s100102_lo.img
ad47016030s100202_lo.img
-> Setting EXPOSURE=16308.66424793 in ad47016030sis32002_lo.totsky
-> Setting TOTCTS=61502 in ad47016030sis32002_lo.totsky
-> Exposure for ad47016030s000102_hi.img is 1.280000000000000E+02 seconds
-> ad47016030s000102_hi.img has 157 counts
-> Exposure for ad47016030s000202_hi.img is 8.060433648169041E+03 seconds
-> ad47016030s000202_hi.img has 12866 counts
-> Exposure for ad47016030s100102_hi.img is 1.280000000000000E+02 seconds
-> ad47016030s100102_hi.img has 131 counts
-> Exposure for ad47016030s100202_hi.img is 7.992230599761009E+03 seconds
-> ad47016030s100202_hi.img has 9743 counts
-> Summing the following images to produce ad47016030sis32002_hi.totsky
ad47016030s000102_hi.img
ad47016030s000202_hi.img
ad47016030s100102_hi.img
ad47016030s100202_hi.img
-> Setting EXPOSURE=16308.66424793 in ad47016030sis32002_hi.totsky
-> Setting TOTCTS=22897 in ad47016030sis32002_hi.totsky
-> Running XIMAGE to create ad47016030sis32002.gif
-> Standard Output From STOOL ximage:
 No of detectors read in:   21
![1]XIMAGE> read/fits ad47016030sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 479.00000
 Saving current map
![2]XIMAGE> read/expo ad47016030sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 271.81107
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     1.00000
  Min and max :   0  273
 Max-preserving scaling factor :     1.7545788
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     273.000
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit
-> Summing gis images
-> Exposure for ad47016030g200170.expo is 9695.928711 seconds
-> Exposure for ad47016030g200270.expo is 9682.113281 seconds
-> Exposure for ad47016030g300170.expo is 9695.928711 seconds
-> Exposure for ad47016030g300270.expo is 9682.113281 seconds
-> Exposure for ad47016030g300570.expo is 31.999950 seconds
-> Summing the following images to produce ad47016030gis25670.totexpo
ad47016030g200170.expo
ad47016030g200270.expo
ad47016030g300170.expo
ad47016030g300270.expo
ad47016030g300570.expo
-> Setting EXPOSURE=38788.083934 in ad47016030gis25670.totexpo
-> Exposure for ad47016030g200170_all.img is 9.695928885638714E+03 seconds
-> ad47016030g200170_all.img has 38588 counts
-> Exposure for ad47016030g200270_all.img is 9.682112757444382E+03 seconds
-> ad47016030g200270_all.img has 38542 counts
-> Exposure for ad47016030g300170_all.img is 9.695928885638714E+03 seconds
-> ad47016030g300170_all.img has 44743 counts
-> Exposure for ad47016030g300270_all.img is 9.682112757444382E+03 seconds
-> ad47016030g300270_all.img has 44312 counts
-> Exposure for ad47016030g300570_all.img is 3.199995005130768E+01 seconds
-> ad47016030g300570_all.img has 128 counts
-> Summing the following images to produce ad47016030gis25670_all.totsky
ad47016030g200170_all.img
ad47016030g200270_all.img
ad47016030g300170_all.img
ad47016030g300270_all.img
ad47016030g300570_all.img
-> Setting EXPOSURE=38788.0832362175 in ad47016030gis25670_all.totsky
-> Setting TOTCTS=166313 in ad47016030gis25670_all.totsky
-> Exposure for ad47016030g200170_lo.img is 9.695928885638714E+03 seconds
-> ad47016030g200170_lo.img has 25132 counts
-> Exposure for ad47016030g200270_lo.img is 9.682112757444382E+03 seconds
-> ad47016030g200270_lo.img has 25247 counts
-> Exposure for ad47016030g300170_lo.img is 9.695928885638714E+03 seconds
-> ad47016030g300170_lo.img has 29043 counts
-> Exposure for ad47016030g300270_lo.img is 9.682112757444382E+03 seconds
-> ad47016030g300270_lo.img has 28905 counts
-> Exposure for ad47016030g300570_lo.img is 3.199995005130768E+01 seconds
-> ad47016030g300570_lo.img has 82 counts
-> Summing the following images to produce ad47016030gis25670_lo.totsky
ad47016030g200170_lo.img
ad47016030g200270_lo.img
ad47016030g300170_lo.img
ad47016030g300270_lo.img
ad47016030g300570_lo.img
-> Setting EXPOSURE=38788.0832362175 in ad47016030gis25670_lo.totsky
-> Setting TOTCTS=108409 in ad47016030gis25670_lo.totsky
-> Exposure for ad47016030g200170_hi.img is 9.695928885638714E+03 seconds
-> ad47016030g200170_hi.img has 13697 counts
-> Exposure for ad47016030g200270_hi.img is 9.682112757444382E+03 seconds
-> ad47016030g200270_hi.img has 13546 counts
-> Exposure for ad47016030g300170_hi.img is 9.695928885638714E+03 seconds
-> ad47016030g300170_hi.img has 15963 counts
-> Exposure for ad47016030g300270_hi.img is 9.682112757444382E+03 seconds
-> ad47016030g300270_hi.img has 15651 counts
-> Exposure for ad47016030g300570_hi.img is 3.199995005130768E+01 seconds
-> ad47016030g300570_hi.img has 47 counts
-> Summing the following images to produce ad47016030gis25670_hi.totsky
ad47016030g200170_hi.img
ad47016030g200270_hi.img
ad47016030g300170_hi.img
ad47016030g300270_hi.img
ad47016030g300570_hi.img
-> Setting EXPOSURE=38788.0832362175 in ad47016030gis25670_hi.totsky
-> Setting TOTCTS=58904 in ad47016030gis25670_hi.totsky
-> Running XIMAGE to create ad47016030gis25670.gif
-> Standard Output From STOOL ximage:
 No of detectors read in:   21
![1]XIMAGE> read/fits ad47016030gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 1083.0000
 Saving current map
![2]XIMAGE> read/expo ad47016030gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 646.46808
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :     1.00000
  Min and max :   0  849
 Max-preserving scaling factor :     1.2756184
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     3232.34
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (12:55:39)

-> Detecting sources in all images
-> Smoothing ad47016030gis25670_all.totsky with ad47016030gis25670.totexpo
-> Detecting sources in ad47016030gis25670_all.smooth
-> stdout output from ascasource
134 109 0.0221861 113 7 1739.82
-> Smoothing ad47016030gis25670_hi.totsky with ad47016030gis25670.totexpo
-> Detecting sources in ad47016030gis25670_hi.smooth
-> stdout output from ascasource
134 109 0.0085049 113 7 1222.39
-> Smoothing ad47016030gis25670_lo.totsky with ad47016030gis25670.totexpo
-> Detecting sources in ad47016030gis25670_lo.smooth
-> stdout output from ascasource
134 109 0.0138416 113 8 2513.91
-> Determining extraction radii
-> Eliminating redundant sources
-> stdout output from sift_sources
134 109 24 F
-> stdout output from pix2sky
26.5898 61.7556
-> The following sources have radius > 2
47016030 1 134 109 24 26.5898 61.7556 0.098232 2.09182 1.07054 F
-> Making image ad47016030gis25670_source.ps showing sources
-> stdout output from colorpic
color plane 0
color plane 1
color plane 2
writing image
image written
-> Creating source catalog ad47016030gis25670.src
-> Smoothing ad47016030sis32002_all.totsky with ad47016030sis32002.totexpo
-> Detecting sources in ad47016030sis32002_all.smooth
-> stdout output from ascasource
172 112 0.0178569 93 7 1525.22
-> Smoothing ad47016030sis32002_hi.totsky with ad47016030sis32002.totexpo
-> Detecting sources in ad47016030sis32002_hi.smooth
-> stdout output from ascasource
172 112 0.00515064 93 7 1086.05
-> Smoothing ad47016030sis32002_lo.totsky with ad47016030sis32002.totexpo
-> Detecting sources in ad47016030sis32002_lo.smooth
-> stdout output from ascasource
172 112 0.0127131 93 7 1573.45
-> Determining extraction radii
-> Eliminating redundant sources
-> stdout output from sift_sources
172 112 38 F
-> stdout output from pix2sky
26.593 61.7503
-> The following sources have radius > 2
47016030 1 172 112 38 26.593 61.7503 0.067184 3.11625 1.19565 F
-> Making image ad47016030sis32002_source.ps showing sources
-> stdout output from colorpic
color plane 0
color plane 1
color plane 2
writing image
image written
-> Creating source catalog ad47016030sis32002.src
-> Generating region files for all sources
-> working on ad47016030sis32002.src s0 source 1
-> Converting SKY (172,112) to DET coordinates for inst=s0 dimen=320, and mode=02
-> need to merge event files
-> Merging ad47016030s000102m.evt ad47016030s000202h.evt
-> DETX=116, DETY=116 using 8 pixel radius (using 2301 events)
-> working on ad47016030sis32002.src s1 source 1
-> Converting SKY (172,112) to DET coordinates for inst=s1 dimen=320, and mode=02
-> need to merge event files
-> Merging ad47016030s100102m.evt ad47016030s100202h.evt
-> DETX=115, DETY=125 using 8 pixel radius (using 1610 events)
-> working on ad47016030gis25670.src g2 source 1
-> Converting SKY (134,109) to DET coordinates for inst=g2 dimen=256, and mode=70
-> need to merge event files
-> Merging ad47016030g200170m.evt ad47016030g200270h.evt
-> DETX=107, DETY=113 using 2 pixel radius (using 5049 events)
-> working on ad47016030gis25670.src g3 source 1
-> Converting SKY (134,109) to DET coordinates for inst=g3 dimen=256, and mode=70
-> need to merge event files
-> Merging ad47016030g300170m.evt ad47016030g300270h.evt ad47016030g300570m.evt
-> DETX=113, DETY=114 using 2 pixel radius (using 7135 events)

Extracting spectra and generating response matrices (12:58:7)

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:
1 ad47016030s000102m.evt 47068
1 ad47016030s000202h.evt 47068
-> Fetching SIS0_NOTCHIP0.1
-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Fetching SIS0_OFFCHIP.2
-> Extracting ad47016030s010102_1.pi from ad47016030s032002_1.reg and:
ad47016030s000102m.evt
ad47016030s000202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      625 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      625 0100
      2 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.81E+04    46443 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            625       566             59         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          46443     42317           4126         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47068     42883           4185         0         0         0
   in  8188.4     seconds
 Spectrum         has    42883 counts for  5.237     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8188.4          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s010102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s000102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad47016030s000202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47016030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad47016030s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad47016030s010102_1.pi group=yes
Wrote spectrum to ad47016030s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting BLANK keyword from ad47016030s010102_1.pi
-> Grouping ad47016030s010102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8188.4          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      19  are grouped by a factor        3
 ...        20 -      21  are grouped by a factor        2
 ...        22 -     132  are single channels
 ...       133 -     136  are grouped by a factor        2
 ...       137 -     137  are single channels
 ...       138 -     143  are grouped by a factor        2
 ...       144 -     144  are single channels
 ...       145 -     152  are grouped by a factor        2
 ...       153 -     161  are grouped by a factor        3
 ...       162 -     173  are grouped by a factor        4
 ...       174 -     183  are grouped by a factor        5
 ...       184 -     189  are grouped by a factor        6
 ...       190 -     198  are grouped by a factor        9
 ...       199 -     210  are grouped by a factor       12
 ...       211 -     226  are grouped by a factor       16
 ...       227 -     258  are grouped by a factor       32
 ...       259 -     511  are grouped by a factor      253
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s010102_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 1
-> Fetching sis0c1p40_290296.fits
-> Generating ad47016030s010102_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad47016030s010102_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  312  312
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.900     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  467.00  467.00 (detector coordinates)
 Point source at   24.47   11.50 (WMAP bins wrt optical axis)
 Point source at    5.74   25.18 (... in polar coordinates)
 
 Total counts in region = 4.28020E+04
 Weighted mean angle from optical axis  =  5.851 arcmin
-> Standard Output From STOOL group_event_files:
1 ad47016030s000112m.evt 47224
1 ad47016030s000212h.evt 47224
-> SIS0_NOTCHIP0.1 already present in current directory
-> SIS0_NOTCHIP2.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> SIS0_OFFCHIP.2 already present in current directory
-> Extracting ad47016030s010212_1.pi from ad47016030s032002_1.reg and:
ad47016030s000112m.evt
ad47016030s000212h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.13E+03      628 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.13E+03      628 0100
      2 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.81E+04    46596 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            628       569             59         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          46596     42450           4146         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47224     43019           4205         0         0         0
   in  8188.4     seconds
 Spectrum         has    43019 counts for  5.254     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8188.4          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s010212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s000112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > read events ad47016030s000212h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad47016030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad47016030s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad47016030s010212_1.pi group=yes
Wrote spectrum to ad47016030s010212_1.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Deleting BLANK keyword from ad47016030s010212_1.pi
-> Grouping ad47016030s010212_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8188.4          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.59080E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      31  of undefined grouping (Channel quality=bad)
 ...        32 -      41  are grouped by a factor        5
 ...        42 -      44  are grouped by a factor        3
 ...        45 -      48  are grouped by a factor        2
 ...        49 -     218  are single channels
 ...       219 -     220  are grouped by a factor        2
 ...       221 -     222  are single channels
 ...       223 -     226  are grouped by a factor        2
 ...       227 -     228  are single channels
 ...       229 -     230  are grouped by a factor        2
 ...       231 -     231  are single channels
 ...       232 -     265  are grouped by a factor        2
 ...       266 -     271  are grouped by a factor        3
 ...       272 -     273  are grouped by a factor        2
 ...       274 -     282  are grouped by a factor        3
 ...       283 -     286  are grouped by a factor        4
 ...       287 -     298  are grouped by a factor        3
 ...       299 -     306  are grouped by a factor        4
 ...       307 -     318  are grouped by a factor        6
 ...       319 -     323  are grouped by a factor        5
 ...       324 -     329  are grouped by a factor        6
 ...       330 -     336  are grouped by a factor        7
 ...       337 -     345  are grouped by a factor        9
 ...       346 -     353  are grouped by a factor        8
 ...       354 -     362  are grouped by a factor        9
 ...       363 -     373  are grouped by a factor       11
 ...       374 -     389  are grouped by a factor       16
 ...       390 -     409  are grouped by a factor       20
 ...       410 -     434  are grouped by a factor       25
 ...       435 -     477  are grouped by a factor       43
 ...       478 -     591  are grouped by a factor      114
 ...       592 -    1023  are grouped by a factor      432
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s010212_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 1
-> sis0c1p40_290296.fits already present in current directory
-> Generating ad47016030s010212_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C1 Bright2 PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad47016030s010212_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  312  312
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.900     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  467.00  467.00 (detector coordinates)
 Point source at   24.47   11.50 (WMAP bins wrt optical axis)
 Point source at    5.74   25.18 (... in polar coordinates)
 
 Total counts in region = 4.29370E+04
 Weighted mean angle from optical axis  =  5.851 arcmin
-> Standard Output From STOOL group_event_files:
1 ad47016030s100102m.evt 37233
1 ad47016030s100202h.evt 37233
-> Fetching SIS1_NOTCHIP0.1
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_NOTCHIP2.1
-> Fetching SIS1_OFFCHIP.2
-> Extracting ad47016030s110102_1.pi from ad47016030s132002_1.reg and:
ad47016030s100102m.evt
ad47016030s100202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      507 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      507 0001
      2 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.80E+04    36726 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            507       478             29         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36726     33767           2959         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         37233     34245           2988         0         0         0
   in  8120.2     seconds
 Spectrum         has    34245 counts for  4.217     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8120.2          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.37700E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s110102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s100102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad47016030s100202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47016030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad47016030s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad47016030s110102_1.pi group=yes
Wrote spectrum to ad47016030s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting BLANK keyword from ad47016030s110102_1.pi
-> Grouping ad47016030s110102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8120.2          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.37700E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      19  are grouped by a factor        3
 ...        20 -      23  are grouped by a factor        2
 ...        24 -     124  are single channels
 ...       125 -     142  are grouped by a factor        2
 ...       143 -     145  are grouped by a factor        3
 ...       146 -     147  are grouped by a factor        2
 ...       148 -     156  are grouped by a factor        3
 ...       157 -     164  are grouped by a factor        4
 ...       165 -     169  are grouped by a factor        5
 ...       170 -     177  are grouped by a factor        8
 ...       178 -     182  are grouped by a factor        5
 ...       183 -     190  are grouped by a factor        8
 ...       191 -     203  are grouped by a factor       13
 ...       204 -     217  are grouped by a factor       14
 ...       218 -     253  are grouped by a factor       36
 ...       254 -     476  are grouped by a factor      223
 ...       477 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s110102_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 3
-> Fetching sis1c3p40_290296.fits
-> Generating ad47016030s110102_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad47016030s110102_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   36 bins
               expanded to   38 by   36 bins
 First WMAP bin is at detector pixel  304  344
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   50.436     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  459.00  491.00 (detector coordinates)
 Point source at   19.91   35.35 (WMAP bins wrt optical axis)
 Point source at    8.61   60.61 (... in polar coordinates)
 
 Total counts in region = 3.41870E+04
 Weighted mean angle from optical axis  =  8.516 arcmin
-> Standard Output From STOOL group_event_files:
1 ad47016030s100112m.evt 37331
1 ad47016030s100212h.evt 37331
-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_OFFCHIP.2 already present in current directory
-> Extracting ad47016030s110212_1.pi from ad47016030s132002_1.reg and:
ad47016030s100112m.evt
ad47016030s100212h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.13E+03      507 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.13E+03      507 0001
      2 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.80E+04    36824 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            507       478             29         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36824     33848           2976         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         37331     34326           3005         0         0         0
   in  8120.2     seconds
 Spectrum         has    34326 counts for  4.227     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8120.2          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.37700E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s110212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s100112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad47016030s100212h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad47016030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad47016030s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad47016030s110212_1.pi group=yes
Wrote spectrum to ad47016030s110212_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Deleting BLANK keyword from ad47016030s110212_1.pi
-> Grouping ad47016030s110212_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 8120.2          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.37700E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      32  of undefined grouping (Channel quality=bad)
 ...        33 -      39  are grouped by a factor        7
 ...        40 -      44  are grouped by a factor        5
 ...        45 -      47  are grouped by a factor        3
 ...        48 -      51  are grouped by a factor        2
 ...        52 -     192  are single channels
 ...       193 -     194  are grouped by a factor        2
 ...       195 -     207  are single channels
 ...       208 -     209  are grouped by a factor        2
 ...       210 -     210  are single channels
 ...       211 -     212  are grouped by a factor        2
 ...       213 -     213  are single channels
 ...       214 -     215  are grouped by a factor        2
 ...       216 -     216  are single channels
 ...       217 -     238  are grouped by a factor        2
 ...       239 -     241  are grouped by a factor        3
 ...       242 -     251  are grouped by a factor        2
 ...       252 -     278  are grouped by a factor        3
 ...       279 -     282  are grouped by a factor        4
 ...       283 -     287  are grouped by a factor        5
 ...       288 -     303  are grouped by a factor        4
 ...       304 -     315  are grouped by a factor        6
 ...       316 -     322  are grouped by a factor        7
 ...       323 -     330  are grouped by a factor        8
 ...       331 -     340  are grouped by a factor       10
 ...       341 -     356  are grouped by a factor       16
 ...       357 -     367  are grouped by a factor       11
 ...       368 -     381  are grouped by a factor       14
 ...       382 -     411  are grouped by a factor       30
 ...       412 -     443  are grouped by a factor       32
 ...       444 -     507  are grouped by a factor       64
 ...       508 -     941  are grouped by a factor      434
 ...       942 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030s110212_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 3
-> sis1c3p40_290296.fits already present in current directory
-> Generating ad47016030s110212_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C3 Bright2 PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad47016030s110212_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   36 bins
               expanded to   38 by   36 bins
 First WMAP bin is at detector pixel  304  344
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   50.436     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  459.00  491.00 (detector coordinates)
 Point source at   19.91   35.35 (WMAP bins wrt optical axis)
 Point source at    8.61   60.61 (... in polar coordinates)
 
 Total counts in region = 3.42590E+04
 Weighted mean angle from optical axis  =  8.515 arcmin
-> Standard Output From STOOL group_event_files:
1 ad47016030g200170m.evt 77285
1 ad47016030g200270h.evt 77285
-> GIS2_REGION256.4 already present in current directory
-> Extracting ad47016030g210170_1.pi from ad47016030g225670_1.reg and:
ad47016030g200170m.evt
ad47016030g200270h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    38667     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    38667     1024
      2 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.97E+04    38618     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38667     31298           7369         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38618     31386           7232         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         77285     62684          14601         0         0         0
   in  19378.     seconds
 Spectrum         has    62684 counts for  3.235     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 19378.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > read events ad47016030g200270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47016030g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad47016030g210170_1.pi group=yes
Wrote spectrum to ad47016030g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Deleting BLANK keyword from ad47016030g210170_1.pi
-> Correcting ad47016030g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:
... read all the files from deadlist.tmp
-> Grouping ad47016030g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 19124.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      21  are grouped by a factor       22
 ...        22 -      25  are grouped by a factor        2
 ...        26 -      26  are single channels
 ...        27 -      32  are grouped by a factor        2
 ...        33 -      33  are single channels
 ...        34 -      35  are grouped by a factor        2
 ...        36 -      36  are single channels
 ...        37 -      38  are grouped by a factor        2
 ...        39 -      39  are single channels
 ...        40 -      41  are grouped by a factor        2
 ...        42 -      44  are single channels
 ...        45 -      46  are grouped by a factor        2
 ...        47 -      49  are single channels
 ...        50 -      51  are grouped by a factor        2
 ...        52 -      54  are single channels
 ...        55 -      56  are grouped by a factor        2
 ...        57 -     297  are single channels
 ...       298 -     299  are grouped by a factor        2
 ...       300 -     300  are single channels
 ...       301 -     302  are grouped by a factor        2
 ...       303 -     305  are single channels
 ...       306 -     307  are grouped by a factor        2
 ...       308 -     310  are single channels
 ...       311 -     312  are grouped by a factor        2
 ...       313 -     315  are single channels
 ...       316 -     327  are grouped by a factor        2
 ...       328 -     328  are single channels
 ...       329 -     342  are grouped by a factor        2
 ...       343 -     345  are grouped by a factor        3
 ...       346 -     353  are grouped by a factor        2
 ...       354 -     359  are grouped by a factor        3
 ...       360 -     361  are grouped by a factor        2
 ...       362 -     370  are grouped by a factor        3
 ...       371 -     372  are grouped by a factor        2
 ...       373 -     387  are grouped by a factor        3
 ...       388 -     391  are grouped by a factor        4
 ...       392 -     406  are grouped by a factor        3
 ...       407 -     422  are grouped by a factor        4
 ...       423 -     429  are grouped by a factor        7
 ...       430 -     434  are grouped by a factor        5
 ...       435 -     441  are grouped by a factor        7
 ...       442 -     446  are grouped by a factor        5
 ...       447 -     453  are grouped by a factor        7
 ...       454 -     477  are grouped by a factor        8
 ...       478 -     487  are grouped by a factor       10
 ...       488 -     495  are grouped by a factor        8
 ...       496 -     519  are grouped by a factor       12
 ...       520 -     534  are grouped by a factor       15
 ...       535 -     553  are grouped by a factor       19
 ...       554 -     571  are grouped by a factor       18
 ...       572 -     594  are grouped by a factor       23
 ...       595 -     626  are grouped by a factor       32
 ...       627 -     662  are grouped by a factor       36
 ...       663 -     723  are grouped by a factor       61
 ...       724 -     829  are grouped by a factor      106
 ...       830 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030g210170_1.pi
 ** grppha 2.9.0 completed successfully
-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad47016030g210170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   44   50
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  106.50  112.50 (detector coordinates)
 Point source at   26.50   18.46 (WMAP bins wrt optical axis)
 Point source at    7.93   34.86 (... in polar coordinates)
 
 Total counts in region = 6.25590E+04
 Weighted mean angle from optical axis  =  7.759 arcmin
-> Standard Output From STOOL group_event_files:
1 ad47016030g300170m.evt 89332
1 ad47016030g300270h.evt 89332
1 ad47016030g300570m.evt 89332
-> GIS3_REGION256.4 already present in current directory
-> Extracting ad47016030g310170_1.pi from ad47016030g325670_1.reg and:
ad47016030g300170m.evt
ad47016030g300270h.evt
ad47016030g300570m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    44823     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    44823     1024
      2 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.97E+04    44380     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    44823     1024
      2 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.97E+04    44380     1024
      3 4U 0142+61  PH          MEDIUM      1999-08-13  00:18:11    0.32E+02      129     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44823     37633           7190         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44380     37211           7169         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            129       107             22         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         89332     74951          14381         0         0         0
   in  19410.     seconds
 Spectrum         has    74951 counts for  3.861     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 19410.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > read events ad47016030g300270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > read events ad47016030g300570m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47016030g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad47016030g310170_1.pi group=yes
Wrote spectrum to ad47016030g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Deleting BLANK keyword from ad47016030g310170_1.pi
-> Correcting ad47016030g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:
... read all the files from deadlist.tmp
-> Grouping ad47016030g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 19160.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      21  are grouped by a factor       22
 ...        22 -      27  are grouped by a factor        2
 ...        28 -      42  are single channels
 ...        43 -      44  are grouped by a factor        2
 ...        45 -     304  are single channels
 ...       305 -     306  are grouped by a factor        2
 ...       307 -     309  are single channels
 ...       310 -     311  are grouped by a factor        2
 ...       312 -     312  are single channels
 ...       313 -     314  are grouped by a factor        2
 ...       315 -     319  are single channels
 ...       320 -     323  are grouped by a factor        2
 ...       324 -     324  are single channels
 ...       325 -     344  are grouped by a factor        2
 ...       345 -     347  are grouped by a factor        3
 ...       348 -     349  are grouped by a factor        2
 ...       350 -     358  are grouped by a factor        3
 ...       359 -     362  are grouped by a factor        2
 ...       363 -     365  are grouped by a factor        3
 ...       366 -     367  are grouped by a factor        2
 ...       368 -     370  are grouped by a factor        3
 ...       371 -     374  are grouped by a factor        2
 ...       375 -     377  are grouped by a factor        3
 ...       378 -     379  are grouped by a factor        2
 ...       380 -     403  are grouped by a factor        3
 ...       404 -     407  are grouped by a factor        4
 ...       408 -     410  are grouped by a factor        3
 ...       411 -     414  are grouped by a factor        4
 ...       415 -     417  are grouped by a factor        3
 ...       418 -     429  are grouped by a factor        4
 ...       430 -     434  are grouped by a factor        5
 ...       435 -     440  are grouped by a factor        6
 ...       441 -     445  are grouped by a factor        5
 ...       446 -     457  are grouped by a factor        6
 ...       458 -     462  are grouped by a factor        5
 ...       463 -     469  are grouped by a factor        7
 ...       470 -     475  are grouped by a factor        6
 ...       476 -     483  are grouped by a factor        8
 ...       484 -     490  are grouped by a factor        7
 ...       491 -     499  are grouped by a factor        9
 ...       500 -     506  are grouped by a factor        7
 ...       507 -     517  are grouped by a factor       11
 ...       518 -     543  are grouped by a factor       13
 ...       544 -     558  are grouped by a factor       15
 ...       559 -     574  are grouped by a factor       16
 ...       575 -     593  are grouped by a factor       19
 ...       594 -     611  are grouped by a factor       18
 ...       612 -     646  are grouped by a factor       35
 ...       647 -     687  are grouped by a factor       41
 ...       688 -     736  are grouped by a factor       49
 ...       737 -     827  are grouped by a factor       91
 ...       828 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030g310170_1.pi
 ** grppha 2.9.0 completed successfully
-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad47016030g310170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   50   51
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  112.50  113.50 (detector coordinates)
 Point source at    6.86   20.94 (WMAP bins wrt optical axis)
 Point source at    5.41   71.86 (... in polar coordinates)
 
 Total counts in region = 7.48380E+04
 Weighted mean angle from optical axis  =  5.532 arcmin
-> Plotting ad47016030g210170_1_pi.ps from ad47016030g210170_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:37:52 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47016030g210170_1.pi;
 Net count rate (cts/s) for file   1   3.278    +/-  1.3109E-02
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad47016030g210170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad47016030g310170_1_pi.ps from ad47016030g310170_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:38:08 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47016030g310170_1.pi;
 Net count rate (cts/s) for file   1   3.912    +/-  1.4306E-02
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad47016030g310170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad47016030s010102_1_pi.ps from ad47016030s010102_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:38:24 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47016030s010102_1.pi;
 Net count rate (cts/s) for file   1   5.237    +/-  2.5294E-02
   using response (RMF) file...       ad47016030s010102_1.rmf
   using auxiliary (ARF) file...      ad47016030s010102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad47016030s010212_1_pi.ps from ad47016030s010212_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:38:43 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47016030s010212_1.pi;
 Net count rate (cts/s) for file   1   5.254    +/-  2.5338E-02
   using response (RMF) file...       ad47016030s010212_1.rmf
   using auxiliary (ARF) file...      ad47016030s010212_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad47016030s110102_1_pi.ps from ad47016030s110102_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:39:02 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47016030s110102_1.pi;
 Net count rate (cts/s) for file   1   4.217    +/-  2.2803E-02
   using response (RMF) file...       ad47016030s110102_1.rmf
   using auxiliary (ARF) file...      ad47016030s110102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad47016030s110212_1_pi.ps from ad47016030s110212_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:39:20 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad47016030s110212_1.pi;
 Net count rate (cts/s) for file   1   4.227    +/-  2.2850E-02
   using response (RMF) file...       ad47016030s110212_1.rmf
   using auxiliary (ARF) file...      ad47016030s110212_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

Extracting light curves (13:39:27)

-> Working on s0 mode 02
-> Extracting lightcurves from ad47016030s000102m.evt ad47016030s000202h.evt
-> Largest TIMEDEL=4.0000000E+00
-> Extracting event file filtered with ad47016030s032002_1.reg
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad47016030s000102m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
            625       566             59         0         0         0
 Writing events file
    566 events written to the output file
 Doing file: ad47016030s000202h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          46443     42317           4126         0         0         0
 Writing events file
  42883 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47068     42883           4185         0         0         0
   in  8188.4     seconds
-> Extracting ad47016030s032002_1.lc with binsize 9.54741231743236
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          42883     42883              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         42883     42883              0         0         0         0
   in  8188.4     seconds
 Fits light curve has    42883 counts for  5.237     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
-> No files for s0 mode 03
-> Working on s1 mode 02
-> Extracting lightcurves from ad47016030s100102m.evt ad47016030s100202h.evt
-> Largest TIMEDEL=4.0000000E+00
-> Extracting event file filtered with ad47016030s132002_1.reg
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad47016030s100102m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
            507       478             29         0         0         0
 Writing events file
    478 events written to the output file
 Doing file: ad47016030s100202h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          36726     33839           2887         0         0         0
 Writing events file
  34317 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         37233     34317           2916         0         0         0
   in  8120.2     seconds
-> Extracting ad47016030s132002_1.lc with binsize 11.8312069816141
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          34317     34317              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         34317     34317              0         0         0         0
   in  8120.2     seconds
 Fits light curve has    34317 counts for  4.226     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
-> No files for s1 mode 03
-> Working on g2 mode 70
-> Extracting lightcurves from ad47016030g200170m.evt ad47016030g200270h.evt
-> Largest TIMEDEL=5.0000000E-01
-> Extracting event file filtered with ad47016030g225670_1.reg
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad47016030g200170m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          38667     31298           7369         0         0         0
 Writing events file
  31298 events written to the output file
 Doing file: ad47016030g200270h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          38618     31386           7232         0         0         0
 Writing events file
  62684 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         77285     62684          14601         0         0         0
   in  19378.     seconds
-> Extracting ad47016030g225670_1.lc with binsize 15.4569281180868
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          62684     62684              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         62684     62684              0         0         0         0
   in  19378.     seconds
 Fits light curve has    62684 counts for  3.235     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
-> No files for g2 mode 71
-> Working on g3 mode 70
-> Extracting lightcurves from ad47016030g300170m.evt ad47016030g300270h.evt ad47016030g300570m.evt
-> Largest TIMEDEL=5.0000000E-01
-> Extracting event file filtered with ad47016030g325670_1.reg
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad47016030g300170m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          44823     37633           7190         0         0         0
 Writing events file
  37633 events written to the output file
 Doing file: ad47016030g300270h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          44380     37211           7169         0         0         0
 Writing events file
  74844 events written to the output file
 Doing file: ad47016030g300570m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
            129       107             22         0         0         0
 Writing events file
  74951 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         89332     74951          14381         0         0         0
   in  19410.     seconds
-> Extracting ad47016030g325670_1.lc with binsize 12.9484873696997
-> stdout output from extractor
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: lightcurve_filtered_events.tmp
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          74951     74951              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         74951     74951              0         0         0         0
   in  19410.     seconds
 Fits light curve has    74951 counts for  3.861     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
-> No files for g3 mode 71
-> Plotting all lightcurves
-> Plotting ad47016030g225670_1.lc in ad47016030g225670_1_lc.ps
-> stdout output from lcurve
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47016030g225670_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ 4U 0142+61          Start Time (d) .... 11402 22:56:03.190
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11403 10:32:51.056
 No. of Rows .......         1255        Bin Time (s) ......    15.46
 Right Ascension ... 2.6637E+01          Internal time sys.. Converted to TJD
 Declination ....... 6.1835E+01          Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11402.95559247503  (days)      22:56: 3:190  (h:m:s:ms)
 Expected Stop .... 11403.43947981033  (days)      10:32:51: 56  (h:m:s:ms)
 
 Minimum Newbin Time    15.456928      (s)
 for Maximum Newbin No..             2705
 
 Default Newbin Time is:   81.751791    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     81.751791      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       81.7518     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11402 22:56:44
     Ser.1     Avg  3.242        Chisq  227.9       Var 0.5309E-01 Newbs.    254
               Min  2.522          Max  4.035    expVar 0.5213E-01  Bins   1255
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad47016030g225670_1_lc.ps/ps
!PLT> LA File ad47016030g225670_1.lc
!PLT> plot
!PLT> quit
-> Plotting ad47016030g325670_1.lc in ad47016030g325670_1_lc.ps
-> stdout output from lcurve
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47016030g325670_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ 4U 0142+61          Start Time (d) .... 11402 22:56:03.190
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11403 10:32:51.056
 No. of Rows .......         1501        Bin Time (s) ......    12.95
 Right Ascension ... 2.6637E+01          Internal time sys.. Converted to TJD
 Declination ....... 6.1835E+01          Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11402.95559247503  (days)      22:56: 3:190  (h:m:s:ms)
 Expected Stop .... 11403.43947981033  (days)      10:32:51: 56  (h:m:s:ms)
 
 Minimum Newbin Time    12.948487      (s)
 for Maximum Newbin No..             3229
 
 Default Newbin Time is:   81.751791    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     81.751791      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       81.7518     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11402 22:56:44
     Ser.1     Avg  3.866        Chisq  208.0       Var 0.6446E-01 Newbs.    255
               Min  3.032          Max  5.330    expVar 0.6347E-01  Bins   1501
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad47016030g325670_1_lc.ps/ps
!PLT> LA File ad47016030g325670_1.lc
!PLT> plot
!PLT> quit
-> Plotting ad47016030s032002_1.lc in ad47016030s032002_1_lc.ps
-> stdout output from lcurve
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47016030s032002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ 4U 0142+61          Start Time (d) .... 11402 23:14:11.190
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11403 10:14:27.190
 No. of Rows .......          857        Bin Time (s) ......    9.547
 Right Ascension ... 2.6637E+01          Internal time sys.. Converted to TJD
 Declination ....... 6.1835E+01          Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11402.96818506762  (days)      23:14:11:190  (h:m:s:ms)
 Expected Stop .... 11403.42670358614  (days)      10:14:27:190  (h:m:s:ms)
 
 Minimum Newbin Time    9.5474123      (s)
 for Maximum Newbin No..             4150
 
 Default Newbin Time is:   77.465780    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     77.465780      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       77.4658     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11402 23:14:49
     Ser.1     Avg  5.230        Chisq  109.2       Var 0.1132     Newbs.    119
               Min  4.188          Max  6.250    expVar 0.9071E-01  Bins    857
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad47016030s032002_1_lc.ps/ps
!PLT> LA File ad47016030s032002_1.lc
!PLT> plot
!PLT> quit
-> Plotting ad47016030s132002_1.lc in ad47016030s132002_1_lc.ps
-> stdout output from lcurve
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad47016030s132002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ 4U 0142+61          Start Time (d) .... 11402 23:27:31.190
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11403 10:14:27.190
 No. of Rows .......          686        Bin Time (s) ......    11.83
 Right Ascension ... 2.6637E+01          Internal time sys.. Converted to TJD
 Declination ....... 6.1835E+01          Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11402.97744432688  (days)      23:27:31:190  (h:m:s:ms)
 Expected Stop .... 11403.42670358614  (days)      10:14:27:190  (h:m:s:ms)
 
 Minimum Newbin Time    11.831207      (s)
 for Maximum Newbin No..             3281
 
 Default Newbin Time is:   75.901447    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     75.901447      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       75.9014     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11402 23:28: 9
     Ser.1     Avg  4.192        Chisq  99.51       Var 0.9900E-01 Newbs.    124
               Min  2.874          Max  4.768    expVar 0.8597E-01  Bins    686
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad47016030s132002_1_lc.ps/ps
!PLT> LA File ad47016030s132002_1.lc
!PLT> plot
!PLT> quit
-> Creating GIS monitor count (HK) lightcurves
-> Creating a merged GTI file for g2
-> Making L1 light curve of ft990812_2223_1040G2HK.fits with irate=HIGH
-> stdout output from ghkcurve
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  40851 output records from   40886  good input G2_L1    records.
-> Making L1 light curve of ft990812_2223_1040G2HK.fits with irate=HI+MED
-> stdout output from ghkcurve
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  19292 output records from   50553  good input G2_L1    records.
-> Creating a merged GTI file for g3
-> Making L1 light curve of ft990812_2223_1040G3HK.fits with irate=HIGH
-> stdout output from ghkcurve
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  42683 output records from   42718  good input G3_L1    records.
-> Making L1 light curve of ft990812_2223_1040G3HK.fits with irate=HI+MED
-> stdout output from ghkcurve
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  19351 output records from   52434  good input G3_L1    records.

Extracting source event files (13:42:14)

-> Extracting unbinned light curve ad47016030g200170.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    38667     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38667     31298           7369         0         0         0
 Writing events file
  31298 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38667     31298           7369         0         0         0
   in  9695.9     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47016030g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad47016030g200170.ulc use_events=yes
Wrote events list to file ad47016030g200170.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad47016030g200270.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.97E+04    38618     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          38618     31386           7232         0         0         0
 Writing events file
  31386 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38618     31386           7232         0         0         0
   in  9682.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g200270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad47016030g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad47016030g200270.ulc use_events=yes
Wrote events list to file ad47016030g200270.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad47016030g300170.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.97E+04    44823     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44823     37633           7190         0         0         0
 Writing events file
  37633 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44823     37633           7190         0         0         0
   in  9695.9     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47016030g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad47016030g300170.ulc use_events=yes
Wrote events list to file ad47016030g300170.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad47016030g300270.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.97E+04    44380     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          44380     37211           7169         0         0         0
 Writing events file
  37211 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         44380     37211           7169         0         0         0
   in  9682.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g300270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47016030g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad47016030g300270.ulc use_events=yes
Wrote events list to file ad47016030g300270.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad47016030g300570.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-13  00:18:11    0.32E+02      129     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            129       107             22         0         0         0
 Writing events file
    107 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           129       107             22         0         0         0
   in  32.000     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g300570m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad47016030g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad47016030g300570.ulc use_events=yes
Wrote events list to file ad47016030g300570.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad47016030s000102.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      625 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            625       566             59         0         0         0
 Writing events file
    566 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           625       566             59         0         0         0
   in  128.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s000102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47016030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad47016030s000102.ulc use_events=yes
Wrote events list to file ad47016030s000102.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad47016030s000112.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.13E+03      628 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            628       569             59         0         0         0
 Writing events file
    569 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           628       569             59         0         0         0
   in  128.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s000112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad47016030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad47016030s000112.ulc use_events=yes
Wrote events list to file ad47016030s000112.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad47016030s000202.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.81E+04    46443 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          46443     42317           4126         0         0         0
 Writing events file
  42317 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         46443     42317           4126         0         0         0
   in  8060.4     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s000202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad47016030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad47016030s000202.ulc use_events=yes
Wrote events list to file ad47016030s000202.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad47016030s000212.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.81E+04    46596 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          46596     42450           4146         0         0         0
 Writing events file
  42450 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         46596     42450           4146         0         0         0
   in  8060.4     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s000212h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad47016030s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad47016030s000212.ulc use_events=yes
Wrote events list to file ad47016030s000212.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad47016030s100102.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.13E+03      507 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            507       478             29         0         0         0
 Writing events file
    478 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           507       478             29         0         0         0
   in  128.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s100102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47016030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad47016030s100102.ulc use_events=yes
Wrote events list to file ad47016030s100102.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad47016030s100112.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.13E+03      507 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            507       478             29         0         0         0
 Writing events file
    478 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           507       478             29         0         0         0
   in  128.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s100112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad47016030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad47016030s100112.ulc use_events=yes
Wrote events list to file ad47016030s100112.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad47016030s100202.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.80E+04    36726 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36726     33839           2887         0         0         0
 Writing events file
  33839 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36726     33839           2887         0         0         0
   in  7992.2     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s100202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad47016030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad47016030s100202.ulc use_events=yes
Wrote events list to file ad47016030s100202.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad47016030s100212.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.80E+04    36824 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          36824     33919           2905         0         0         0
 Writing events file
  33919 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36824     33919           2905         0         0         0
   in  7992.2     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030s100212h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad47016030s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad47016030s100212.ulc use_events=yes
Wrote events list to file ad47016030s100212.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_47016030.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Extracting FRAME mode data (13:47:8)

-> Extracting FRAME mode data from ft990812_2223.1040
-> stdout output from tlmFrm
 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 7614

Total of 0 sets of frame data are extracted.
-> Extracting corner pixel histograms
-> Extracting corner pixels from ad47016030s000101m.unf
-> Calculating corner pixel GTI from ft990812_2223_1040.mkf
-> Extracting corner pixels from ad47016030s000201h.unf
-> Extracting corner pixels from ad47016030s000301l.unf
-> Extracting corner pixels from ad47016030s100101m.unf
-> Extracting corner pixels from ad47016030s100201h.unf
-> Extracting corner pixels from ad47016030s100301l.unf

Extracting GIS calibration source spectra (13:48:11)

-> Standard Output From STOOL group_event_files:
1 ad47016030g200170m.unf 129217
1 ad47016030g200270h.unf 129217
1 ad47016030g200370l.unf 129217
1 ad47016030g200470l.unf 129217
-> Group with the most counts: 1
-> Fetching GIS2_CALSRC256.2
-> Extracting ad47016030g220170.cal from ad47016030g200170m.unf ad47016030g200270h.unf ad47016030g200370l.unf ad47016030g200470l.unf
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    64150     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    64150     1024
      2 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    49395     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    64150     1024
      2 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14683     1024
      3 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    49395     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    64150     1024
      2 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14683     1024
      3 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    49395     1024
      4 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      989     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          64150      2126          62024         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49395      1206          48189         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14683      1107          13576         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            989        52            937         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        129217      4491         124726         0         0         0
   in  35188.     seconds
 Spectrum         has     4491 counts for 0.1276     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 35188.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > read events ad47016030g200270h.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > read events ad47016030g200370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > read events ad47016030g200470l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad47016030g220170.cal group=yes
Wrote spectrum to ad47016030g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Deleting BLANK keyword from ad47016030g220170.cal
-> gis2v4_0.rmf already present in current directory
-> Plotting ad47016030g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:49:10 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad47016030g220170.cal;
 Net count rate (cts/s) for file   1  0.1276    +/-  1.9066E-03
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     4.7579728E+07 using    84 PHA bins.
 Reduced chi-squared =      626049.1     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     4.7579728E+07 using    84 PHA bins.
 Reduced chi-squared =      617918.6     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     4.7579728E+07 using    84 PHA bins.
 Reduced chi-squared =      609996.5     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      1731.410     using    84 PHA bins.
 Reduced chi-squared =      21.91658     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   508.372     -4         0.      3.1822E-03   6.074          0.
              4.8997E-02  7.6642E-03
   203.240     -5         0.      1.7218E-03   5.958          0.
              5.0900E-02  9.7233E-03
   186.204     -6         0.      2.1236E-03   5.960          0.
              5.1690E-02  1.2257E-02
   185.486     -7         0.      1.8510E-03   5.960          0.
              5.1616E-02  1.2257E-02
   185.239     -8         0.      2.0320E-03   5.960          0.
              5.1618E-02  1.2256E-02
   185.113     -9         0.      1.9094E-03   5.960          0.
              5.1618E-02  1.2256E-02
   185.061    -10         0.      1.9914E-03   5.961          0.
              5.1618E-02  1.2256E-02
   185.036    -11         0.      1.9361E-03   5.961          0.
              5.1618E-02  1.2256E-02
   185.025    -12         0.      1.9732E-03   5.961          0.
              5.1618E-02  1.2256E-02
 Number of trials exceeded - last iteration delta =   1.0880E-02
   185.020    -13         0.      1.9482E-03   5.961          0.
              5.1618E-02  1.2256E-02
   112.680      0         0.      1.8920E-03   5.961      0.1211
              5.1926E-02  1.1998E-02
   88.5851     -1         0.      1.4356E-03   5.971      0.1684
              5.6456E-02  1.0742E-02
   83.7031     -2         0.      1.6400E-03   5.985      0.1771
              5.8844E-02  9.1688E-03
   83.1998     -3         0.      1.5192E-03   5.988      0.1780
              5.9253E-02  8.7180E-03
   83.1348     -4         0.      1.6128E-03   5.989      0.1781
              5.9312E-02  8.6625E-03
   83.1032     -5         0.      1.5452E-03   5.989      0.1781
              5.9320E-02  8.6566E-03
   83.0877     -6         0.      1.5944E-03   5.989      0.1781
              5.9320E-02  8.6559E-03
   83.0793     -7         0.      1.5585E-03   5.989      0.1781
              5.9321E-02  8.6558E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 7.17E-08 | -0.99  0.00 -0.01 -0.03 -0.10
 5.87E-07 |  0.11 -0.06 -0.02 -0.10 -0.99
 1.92E-06 | -0.02 -0.04 -0.06  0.99 -0.10
 5.47E-05 |  0.01  0.84 -0.54  0.00 -0.04
 1.92E-04 |  0.00  0.54  0.84  0.07 -0.05
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.5585E-03 +/-  0.2913E-03
    3    3    2   gaussian/b LineE    keV        5.989     +/-  0.9711E-02
    4    4    2   gaussian/b Sigma    keV       0.1781     +/-  0.1228E-01
    5    5    2   gaussian/b norm               5.9321E-02 +/-  0.1650E-02
    6    3    3   gaussian/b LineE    keV        6.594     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1869     = par   4 *   1.049
    8    6    3   gaussian/b norm               8.6558E-03 +/-  0.1091E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      83.07928     using    84 PHA bins.
 Reduced chi-squared =      1.051636     for     79 degrees of freedom
 Null hypothesis probability = 0.355

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Calibration source ad47016030g220170.cal peaks at 5.989 +/- 0.009711 keV
-> Standard Output From STOOL group_event_files:
1 ad47016030g300170m.unf 140664
1 ad47016030g300270h.unf 140664
1 ad47016030g300370l.unf 140664
1 ad47016030g300470l.unf 140664
1 ad47016030g300570m.unf 140664
-> Group with the most counts: 1
-> Fetching GIS3_CALSRC256.2
-> Extracting ad47016030g320170.cal from ad47016030g300170m.unf ad47016030g300270h.unf ad47016030g300370l.unf ad47016030g300470l.unf ad47016030g300570m.unf
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
      2 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    54697     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
      2 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14533     1024
      3 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    54697     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
      2 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14533     1024
      3 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    54697     1024
      4 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      975     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
      2 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14533     1024
      3 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    54697     1024
      4 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      975     1024
      5 4U 0142+61  PH          MEDIUM      1999-08-13  00:18:11    0.11E+03      509     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          69950      1777          68173         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          54697      1085          53612         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14533       853          13680         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            975        40            935         0         0         0
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            509        16            493         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        140664      3771         136893         0         0         0
   in  35300.     seconds
 Spectrum         has     3771 counts for 0.1068     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 35300.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad47016030g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA > read events ad47016030g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > read events ad47016030g300270h.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > read events ad47016030g300370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > read events ad47016030g300470l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > read events ad47016030g300570m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   5
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad47016030g320170.cal group=yes
Wrote spectrum to ad47016030g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Deleting BLANK keyword from ad47016030g320170.cal
-> gis3v4_0.rmf already present in current directory
-> Plotting ad47016030g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:

               Xspec 11.00 13:50:18 24-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad47016030g320170.cal;
 Net count rate (cts/s) for file   1  0.1068    +/-  1.7431E-03
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     7.4954232E+07 using    84 PHA bins.
 Reduced chi-squared =      986239.9     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     7.4954232E+07 using    84 PHA bins.
 Reduced chi-squared =      973431.6     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     7.4954232E+07 using    84 PHA bins.
 Reduced chi-squared =      960951.7     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      1874.440     using    84 PHA bins.
 Reduced chi-squared =      23.72709     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   984.900     -1         0.      5.6008E-04   5.772      7.4503E-02
              7.2964E-02  1.3158E-02
   172.670     -2         0.      1.2066E-03   5.842      0.1604
              5.4201E-02  1.0505E-02
   104.838     -3         0.      5.5838E-04   5.907      0.1728
              5.8328E-02  6.5987E-03
   101.752     -4         0.      1.2485E-03   5.902      0.1526
              5.7845E-02  6.9798E-03
   98.5852     -5         0.      6.6587E-04   5.902      0.1504
              5.7798E-02  6.9787E-03
   97.6040     -6         0.      1.1447E-03   5.902      0.1502
              5.7786E-02  6.9910E-03
   96.3948     -7         0.      7.4360E-04   5.902      0.1502
              5.7784E-02  6.9915E-03
   95.8626     -8         0.      1.0742E-03   5.902      0.1502
              5.7784E-02  6.9917E-03
   95.3255     -9         0.      7.9786E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   95.0528    -10         0.      1.0263E-03   5.902      0.1502
              5.7784E-02  6.9916E-03
 Number of trials exceeded - last iteration delta =   0.2726
   94.8086    -11         0.      8.3565E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.6721    -12         0.      9.9352E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.5594    -13         0.      8.6191E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.4922    -14         0.      9.7104E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.4396    -15         0.      8.8015E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.4069    -16         0.      9.5557E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.3822    -17         0.      8.9278E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.3663    -18         0.      9.4492E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.3547    -19         0.      9.0154E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
   94.3470    -20         0.      9.3757E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
 Number of trials exceeded - last iteration delta =   7.6981E-03
   94.3415    -21         0.      9.0760E-04   5.902      0.1502
              5.7784E-02  6.9916E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 5.07E-08 | -1.00  0.00 -0.01 -0.02 -0.08
 5.36E-07 |  0.08 -0.05 -0.02 -0.09 -0.99
 1.81E-06 | -0.02 -0.04 -0.05  0.99 -0.09
 4.72E-05 |  0.00  0.89 -0.45  0.01 -0.04
 1.55E-04 |  0.00  0.44  0.89  0.06 -0.05
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               9.0760E-04 +/-  0.2383E-03
    3    3    2   gaussian/b LineE    keV        5.902     +/-  0.8250E-02
    4    4    2   gaussian/b Sigma    keV       0.1502     +/-  0.1152E-01
    5    5    2   gaussian/b norm               5.7784E-02 +/-  0.1514E-02
    6    3    3   gaussian/b LineE    keV        6.498     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1576     = par   4 *   1.049
    8    6    3   gaussian/b norm               6.9916E-03 +/-  0.9840E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      94.34149     using    84 PHA bins.
 Reduced chi-squared =      1.194196     for     79 degrees of freedom
 Null hypothesis probability = 0.115

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Calibration source ad47016030g320170.cal peaks at 5.902 +/- 0.00825 keV

Extracting bright and dark Earth event files. (13:50:26)

-> Extracting bright and dark Earth events from ad47016030s000102m.unf
-> Extracting ad47016030s000102m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.17E+05    76476 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000102m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          76476       820              0     75656         0         0
 Writing events file
    820 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         76476       820              0     75656         0         0
   in  631.35     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s000102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad47016030s000102m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s000102m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          820
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6         615
 Flickering pixels iter, pixels & cnts :   1           2          12
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            8
 Number of (internal) image counts   :          820
 Number of image cts rejected (N, %) :          62776.46
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            8            0            0
 
 Image counts      :             0          820            0            0
 Image cts rejected:             0          627            0            0
 Image cts rej (%) :          0.00        76.46         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          820            0            0
 Total cts rejected:             0          627            0            0
 Total cts rej (%) :          0.00        76.46         0.00         0.00
 
 Number of clean counts accepted  :          193
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            8
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s000112m.unf
-> Extracting ad47016030s000112m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.17E+05    76673 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000112m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          76673       830              0     75843         0         0
 Writing events file
    830 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         76673       830              0     75843         0         0
   in  631.35     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s000112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad47016030s000112m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s000112m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          830
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6         615
 Flickering pixels iter, pixels & cnts :   1           2          12
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            8
 Number of (internal) image counts   :          830
 Number of image cts rejected (N, %) :          62775.54
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            8            0            0
 
 Image counts      :             0          830            0            0
 Image cts rejected:             0          627            0            0
 Image cts rej (%) :          0.00        75.54         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          830            0            0
 Total cts rejected:             0          627            0            0
 Total cts rej (%) :          0.00        75.54         0.00         0.00
 
 Number of clean counts accepted  :          203
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            8
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s000202h.unf
-> Extracting ad47016030s000202h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.13E+05    85044 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000202h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          85044       370              0     84674         0         0
 Writing events file
    370 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         85044       370              0     84674         0         0
   in  360.65     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s000202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad47016030s000202h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s000202h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          370
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               5         337
 Flickering pixels iter, pixels & cnts :   1           2           9
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            7
 Number of (internal) image counts   :          370
 Number of image cts rejected (N, %) :          34693.51
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            7            0            0
 
 Image counts      :             0          370            0            0
 Image cts rejected:             0          346            0            0
 Image cts rej (%) :          0.00        93.51         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          370            0            0
 Total cts rejected:             0          346            0            0
 Total cts rej (%) :          0.00        93.51         0.00         0.00
 
 Number of clean counts accepted  :           24
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            7
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s000212h.unf
-> Extracting ad47016030s000212h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.13E+05    85262 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000212h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          85262       374              0     84888         0         0
 Writing events file
    374 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         85262       374              0     84888         0         0
   in  360.65     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s000212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad47016030s000212h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s000212h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          374
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               5         337
 Flickering pixels iter, pixels & cnts :   1           2           9
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            7
 Number of (internal) image counts   :          374
 Number of image cts rejected (N, %) :          34692.51
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            7            0            0
 
 Image counts      :             0          374            0            0
 Image cts rejected:             0          346            0            0
 Image cts rej (%) :          0.00        92.51         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          374            0            0
 Total cts rejected:             0          346            0            0
 Total cts rej (%) :          0.00        92.51         0.00         0.00
 
 Number of clean counts accepted  :           28
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            7
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s000302l.unf
-> Extracting ad47016030s000302l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT      LOW         1999-08-12  22:27:39    0.90E+04     2928 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2928      1456              0      1472         0         0
 Writing events file
   1456 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2928      1456              0      1472         0         0
   in  1632.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad47016030s000302l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s000302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1456
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               7        1226
 Flickering pixels iter, pixels & cnts :   1           2           7
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            9
 Number of (internal) image counts   :         1456
 Number of image cts rejected (N, %) :         123384.68
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            9            0            0
 
 Image counts      :             0         1456            0            0
 Image cts rejected:             0         1233            0            0
 Image cts rej (%) :          0.00        84.68         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1456            0            0
 Total cts rejected:             0         1233            0            0
 Total cts rej (%) :          0.00        84.68         0.00         0.00
 
 Number of clean counts accepted  :          223
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            9
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s000312l.unf
-> Extracting ad47016030s000312l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 4U 0142+61  BRIGHT2     LOW         1999-08-12  22:27:39    0.90E+04     2969 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s000312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2969      1483              0      1486         0         0
 Writing events file
   1483 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2969      1483              0      1486         0         0
   in  1632.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad47016030s000312l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s000312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1483
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        1214
 Flickering pixels iter, pixels & cnts :   1           3          19
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            9
 Number of (internal) image counts   :         1483
 Number of image cts rejected (N, %) :         123383.14
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            9            0            0
 
 Image counts      :             0         1483            0            0
 Image cts rejected:             0         1233            0            0
 Image cts rej (%) :          0.00        83.14         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1483            0            0
 Total cts rejected:             0         1233            0            0
 Total cts rej (%) :          0.00        83.14         0.00         0.00
 
 Number of clean counts accepted  :          250
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            9
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s100102m.unf
-> Extracting ad47016030s100102m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      MEDIUM      1999-08-12  22:23:55    0.17E+05    79968 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100102m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          79968      1166              0     78802         0         0
 Writing events file
   1166 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         79968      1166              0     78802         0         0
   in  631.35     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s100102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad47016030s100102m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s100102m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1166
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               8        1013
 Flickering pixels iter, pixels & cnts :   1           2          10
 
 Number of pixels rejected           :           10
 Number of (internal) image counts   :         1166
 Number of image cts rejected (N, %) :         102387.74
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           10
 
 Image counts      :             0            0            0         1166
 Image cts rejected:             0            0            0         1023
 Image cts rej (%) :          0.00         0.00         0.00        87.74
 
    filtering data...
 
 Total counts      :             0            0            0         1166
 Total cts rejected:             0            0            0         1023
 Total cts rej (%) :          0.00         0.00         0.00        87.74
 
 Number of clean counts accepted  :          143
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           10
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s100112m.unf
-> Extracting ad47016030s100112m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     MEDIUM      1999-08-12  22:23:55    0.17E+05    80126 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100112m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          80126      1171              0     78955         0         0
 Writing events file
   1171 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         80126      1171              0     78955         0         0
   in  631.35     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s100112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad47016030s100112m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s100112m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1171
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               8        1013
 Flickering pixels iter, pixels & cnts :   1           2          10
 
 Number of pixels rejected           :           10
 Number of (internal) image counts   :         1171
 Number of image cts rejected (N, %) :         102387.36
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           10
 
 Image counts      :             0            0            0         1171
 Image cts rejected:             0            0            0         1023
 Image cts rej (%) :          0.00         0.00         0.00        87.36
 
    filtering data...
 
 Total counts      :             0            0            0         1171
 Total cts rejected:             0            0            0         1023
 Total cts rej (%) :          0.00         0.00         0.00        87.36
 
 Number of clean counts accepted  :          148
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           10
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s100202h.unf
-> Extracting ad47016030s100202h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      HIGH        1999-08-12  23:27:07    0.13E+05    78243 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100202h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          78243       613              0     77630         0         0
 Writing events file
    613 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         78243       613              0     77630         0         0
   in  360.65     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s100202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad47016030s100202h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s100202h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          613
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               9         594
 
 Number of pixels rejected           :            9
 Number of (internal) image counts   :          613
 Number of image cts rejected (N, %) :          59496.90
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            9
 
 Image counts      :             0            0            0          613
 Image cts rejected:             0            0            0          594
 Image cts rej (%) :          0.00         0.00         0.00        96.90
 
    filtering data...
 
 Total counts      :             0            0            0          613
 Total cts rejected:             0            0            0          594
 Total cts rej (%) :          0.00         0.00         0.00        96.90
 
 Number of clean counts accepted  :           19
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            9
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s100212h.unf
-> Extracting ad47016030s100212h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     HIGH        1999-08-12  23:27:07    0.13E+05    78388 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100212h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          78388       617              0     77771         0         0
 Writing events file
    617 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         78388       617              0     77771         0         0
   in  360.65     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s100212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad47016030s100212h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s100212h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          617
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               9         594
 
 Number of pixels rejected           :            9
 Number of (internal) image counts   :          617
 Number of image cts rejected (N, %) :          59496.27
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            9
 
 Image counts      :             0            0            0          617
 Image cts rejected:             0            0            0          594
 Image cts rej (%) :          0.00         0.00         0.00        96.27
 
    filtering data...
 
 Total counts      :             0            0            0          617
 Total cts rejected:             0            0            0          594
 Total cts rej (%) :          0.00         0.00         0.00        96.27
 
 Number of clean counts accepted  :           23
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            9
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s100302l.unf
-> Extracting ad47016030s100302l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT      LOW         1999-08-12  22:27:39    0.90E+04     6098 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           6098      1810              0      4288         0         0
 Writing events file
   1810 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6098      1810              0      4288         0         0
   in  1632.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad47016030s100302l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s100302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1810
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               8        1630
 Flickering pixels iter, pixels & cnts :   1           2          16
 
 Number of pixels rejected           :           10
 Number of (internal) image counts   :         1810
 Number of image cts rejected (N, %) :         164690.94
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           10
 
 Image counts      :             0            0            0         1810
 Image cts rejected:             0            0            0         1646
 Image cts rej (%) :          0.00         0.00         0.00        90.94
 
    filtering data...
 
 Total counts      :             0            0            0         1810
 Total cts rejected:             0            0            0         1646
 Total cts rej (%) :          0.00         0.00         0.00        90.94
 
 Number of clean counts accepted  :          164
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           10
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030s100312l.unf
-> Extracting ad47016030s100312l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 4U 0142+61  BRIGHT2     LOW         1999-08-12  22:27:39    0.90E+04     6138 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030s100312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           6138      1827              0      4311         0         0
 Writing events file
   1827 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6138      1827              0      4311         0         0
   in  1632.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad47016030s100312l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad47016030s100312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1827
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               8        1630
 Flickering pixels iter, pixels & cnts :   1           2          16
 
 Number of pixels rejected           :           10
 Number of (internal) image counts   :         1827
 Number of image cts rejected (N, %) :         164690.09
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           10
 
 Image counts      :             0            0            0         1827
 Image cts rejected:             0            0            0         1646
 Image cts rej (%) :          0.00         0.00         0.00        90.09
 
    filtering data...
 
 Total counts      :             0            0            0         1827
 Total cts rejected:             0            0            0         1646
 Total cts rej (%) :          0.00         0.00         0.00        90.09
 
 Number of clean counts accepted  :          181
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           10
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad47016030g200170m.unf
-> Extracting ad47016030g200170m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    64150     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          64150       347              0     63803         0         0
 Writing events file
    347 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         64150       347              0     63803         0         0
   in  655.73     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad47016030g200170m.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    64150     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          64150     14110              0     50040         0         0
 Writing events file
  14110 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         64150     14110              0     50040         0         0
   in  4560.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g200270h.unf
-> Extracting ad47016030g200270h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    49395     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49395       141              0     49254         0         0
 Writing events file
    141 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         49395       141              0     49254         0         0
   in  318.27     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad47016030g200270h.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    49395     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          49395       668              0     48727         0         0
 Writing events file
    668 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         49395       668              0     48727         0         0
   in  127.85     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g200370l.unf
-> Extracting ad47016030g200370l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14683     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14683       683              0     14000         0         0
 Writing events file
    683 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14683       683              0     14000         0         0
   in  1280.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad47016030g200370l.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14683     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14683     13476              0      1207         0         0
 Writing events file
  13476 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14683     13476              0      1207         0         0
   in  5632.2     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g200470l.unf
-> Extracting ad47016030g200470l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      989     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200470l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad47016030g200470l.drk since it contains 0 events
-> Extracting ad47016030g200470l.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      989     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g200470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            989       853              0       136         0         0
 Writing events file
    853 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           989       853              0       136         0         0
   in  223.94     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g200470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g300170m.unf
-> Extracting ad47016030g300170m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          69950       336              0     69614         0         0
 Writing events file
    336 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         69950       336              0     69614         0         0
   in  655.73     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad47016030g300170m.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-12  22:24:03    0.16E+05    69950     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          69950     14030              0     55920         0         0
 Writing events file
  14030 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         69950     14030              0     55920         0         0
   in  4560.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g300270h.unf
-> Extracting ad47016030g300270h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    54697     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          54697       121              0     54576         0         0
 Writing events file
    121 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         54697       121              0     54576         0         0
   in  318.27     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad47016030g300270h.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          HIGH        1999-08-12  23:27:21    0.11E+05    54697     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          54697       578              0     54119         0         0
 Writing events file
    578 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         54697       578              0     54119         0         0
   in  127.85     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g300370l.unf
-> Extracting ad47016030g300370l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14533     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14533       620              0     13913         0         0
 Writing events file
    620 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14533       620              0     13913         0         0
   in  1280.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad47016030g300370l.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  22:27:47    0.72E+04    14533     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14533     13391              0      1142         0         0
 Writing events file
  13391 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14533     13391              0      1142         0         0
   in  5632.2     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g300470l.unf
-> Extracting ad47016030g300470l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      975     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300470l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad47016030g300470l.drk since it contains 0 events
-> Extracting ad47016030g300470l.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          LOW         1999-08-12  23:43:31    0.26E+03      975     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300470l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            975       867              0       108         0         0
 Writing events file
    867 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           975       867              0       108         0         0
   in  223.94     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300470l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad47016030g300570m.unf
-> Extracting ad47016030g300570m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-13  00:18:11    0.11E+03      509     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300570m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad47016030g300570m.drk since it contains 0 events
-> Extracting ad47016030g300570m.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 4U 0142+61  PH          MEDIUM      1999-08-13  00:18:11    0.11E+03      509     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_47016030.003/ad47016030g300570m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            509       284              0       225         0         0
 Writing events file
    284 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           509       284              0       225         0         0
   in  64.000     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_47016030.003/
Setting mkf directory to /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA > read events ad47016030g300570m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_47016030.003/
HK Directory is: /data/data23/seq_proc/ad0_47016030.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

Determining information about this observation (14:4:44)

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory

Generating event file information page (14:6:5)

-> Summing time and events for s0 event files
-> listing ad47016030s000202h.unf
-> listing ad47016030s000102m.unf
-> listing ad47016030s000302l.unf
-> listing ad47016030s000212h.unf
-> listing ad47016030s000112m.unf
-> listing ad47016030s000312l.unf
-> listing ad47016030s000201h.unf
-> listing ad47016030s000101m.unf
-> listing ad47016030s000301l.unf
-> Summing time and events for s1 event files
-> listing ad47016030s100202h.unf
-> listing ad47016030s100102m.unf
-> listing ad47016030s100302l.unf
-> listing ad47016030s100212h.unf
-> listing ad47016030s100112m.unf
-> listing ad47016030s100312l.unf
-> listing ad47016030s100201h.unf
-> listing ad47016030s100101m.unf
-> listing ad47016030s100301l.unf
-> Summing time and events for g2 event files
-> listing ad47016030g200270h.unf
-> listing ad47016030g200170m.unf
-> Standard Output From STOOL get_uniq_keys:
ad47016030g200370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad47016030g200470l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad47016030g200370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad47016030g200470l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad47016030g200370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad47016030g200470l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad47016030g200370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad47016030g200470l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad47016030g200370l.unf|SP_A_U_F|239|Spread discri A_U for FLF method (0-255)
ad47016030g200470l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad47016030g200370l.unf|SP_B_F|226|Spread discri B for FLF method (0-255)
ad47016030g200470l.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad47016030g200370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad47016030g200470l.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad47016030g200370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad47016030g200470l.unf|SP_PH_F|31098|Spread discri PH for FLF method (0-1023)
-> listing ad47016030g200370l.unf
-> listing ad47016030g200470l.unf
-> Summing time and events for g3 event files
-> listing ad47016030g300270h.unf
-> Standard Output From STOOL get_uniq_keys:
ad47016030g300170m.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad47016030g300570m.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad47016030g300170m.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad47016030g300570m.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad47016030g300170m.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad47016030g300570m.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad47016030g300170m.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad47016030g300570m.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad47016030g300170m.unf|SP_A_U_F|232|Spread discri A_U for FLF method (0-255)
ad47016030g300570m.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad47016030g300170m.unf|SP_B_F|224|Spread discri B for FLF method (0-255)
ad47016030g300570m.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad47016030g300170m.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad47016030g300570m.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad47016030g300170m.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad47016030g300570m.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)
-> listing ad47016030g300170m.unf
-> listing ad47016030g300570m.unf
-> Standard Output From STOOL get_uniq_keys:
ad47016030g300370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad47016030g300470l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad47016030g300370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad47016030g300470l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad47016030g300370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad47016030g300470l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad47016030g300370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad47016030g300470l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad47016030g300370l.unf|SP_A_U_F|232|Spread discri A_U for FLF method (0-255)
ad47016030g300470l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad47016030g300370l.unf|SP_B_F|224|Spread discri B for FLF method (0-255)
ad47016030g300470l.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad47016030g300370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad47016030g300470l.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad47016030g300370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad47016030g300470l.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)
-> listing ad47016030g300370l.unf
-> listing ad47016030g300470l.unf

Creating HTML header page (14:12:45)

Creating HTML source list (14:13:9)

Doing final wrapup of all files (14:14:26)

-> Copying job.par to ad47016030_003_job.par
-> Copying ad0.par to ad47016030_003_process.par
-> Creating ad47016030_tape.cat
-> Creating ad47016030_trend.cat
-> Creating ad47016030_003_file_info.html
-> Calculating site-independant checksums
-> Site independant checksum: 25326
-> Updating FITS checksum keywords
-> Running fverify on all FITS files

Processing complete (14:37:4)