Processing Job Log for Sequence 57018000, version 004

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (6:17:30)

Checking input files for validity (6:17:31)

-> Verifying the input files
-> FITS file ft990401_1421.0120 exists
-> FITS file fa990401_1421.0120 exists
-> FITS file ad57018000_input.cat exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 1.9713011E+08 = 1999-04-01 14:21:46
-> Observation ends 1.9716965E+08 = 1999-04-02 01:20:46

Determine nominal pointing (6:17:37)

-> Checking fa990401_1421.0120 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect

Spacecraft Euler Angles: Phi=-71.39140 Theta=85.21233 Psi=-1.13977
Telescope pointing: R.A.=288.86364 Dec=4.91502 Roll=268.83866 degrees

-> Nominal spacecraft Euler angles: Phi=-71.391403962077 Theta=85.212334529638 Psi=-1.1397674216679
-> Nominal telescope pointing: R.A.=288.86364021828 Dec=4.9150208071219 Roll Angle=268.83866324598
-> Galactic Coordinates: Lii=40.052161 Bii=-3.077299

Running frfread on telemetry files (6:17:45)

-> Running frfread on ft990401_1421.0120
-> stdout output from frfread4

Dropping SF 458 with invalid bit rate 7
Dropping SF 735 with inconsistent datamode 0/31
Dropping SF 737 with inconsistent datamode 0/31
639.998 second gap between superframes 2312 and 2313
Dropping SF 2384 with inconsistent datamode 0/31
Dropping SF 2395 with inconsistent datamode 0/31
Dropping SF 2404 with inconsistent datamode 0/31
Dropping SF 2407 with synch code word 0 = 254 not 250
Dropping SF 2409 with inconsistent datamode 0/31
15.9999 second gap between superframes 2440 and 2441
Dropping SF 2448 with inconsistent datamode 0/31
Dropping SF 2458 with inconsistent datamode 0/31
Dropping SF 2460 with inconsistent datamode 0/31
Dropping SF 2461 with inconsistent datamode 0/31
Dropping SF 2462 with inconsistent datamode 0/31
Dropping SF 2463 with inconsistent datamode 0/31
Dropping SF 2464 with inconsistent datamode 0/31
Dropping SF 2465 with inconsistent datamode 0/31
Dropping SF 2466 with inconsistent datamode 0/31
Dropping SF 2468 with inconsistent datamode 0/31
Dropping SF 2474 with inconsistent datamode 0/31
Dropping SF 2475 with inconsistent datamode 0/31
Dropping SF 2480 with inconsistent datamode 0/31
Dropping SF 2482 with inconsistent datamode 0/31
Dropping SF 2484 with inconsistent datamode 0/31
Dropping SF 2485 with inconsistent datamode 0/31
Dropping SF 2489 with inconsistent datamode 0/31
Dropping SF 2491 with inconsistent datamode 0/31
Dropping SF 2492 with synch code word 0 = 254 not 250
Dropping SF 2493 with inconsistent datamode 0/31
Dropping SF 2494 with inconsistent datamode 0/31
Warning: GIS3 bit assignment changed between 197146760.08139 and 197147656.07846
GIS3 event at 197147666.57846 0.5 seconds behind 197147667.07846
GIS3 event at 197147668.57846 0.5 seconds behind 197147669.07846
GIS3 event at 197147694.57846 1 seconds behind 197147695.57846
Warning: GIS3 bit assignment changed between 197147656.07846 and 197147720.07825
Dropping SF 2497 with inconsistent datamode 0/31
Dropping SF 2545 with corrupted frame indicator
Dropping SF 2550 with synch code word 0 = 254 not 250
Dropping SF 2568 with synch code word 0 = 254 not 250
SIS0 coordinate error time=197150135.94533 x=0 y=0 pha=0 grade=3
Dropping SF 2596 with inconsistent datamode 0/31
Dropping SF 2613 with inconsistent datamode 0/31
Dropping SF 2617 with inconsistent datamode 0/31
Dropping SF 2619 with inconsistent datamode 0/31
Dropping SF 2620 with inconsistent datamode 0/31
Dropping SF 2621 with inconsistent datamode 0/31
Dropping SF 2622 with inconsistent datamode 0/31
Dropping SF 2623 with inconsistent datamode 0/31
Dropping SF 2625 with inconsistent datamode 0/31
Dropping SF 2626 with inconsistent datamode 0/31
Dropping SF 2627 with inconsistent datamode 0/31
Dropping SF 2628 with inconsistent datamode 0/31
Dropping SF 2629 with inconsistent datamode 0/31
Dropping SF 2630 with inconsistent datamode 0/31
Dropping SF 2631 with inconsistent datamode 0/31
Dropping SF 2632 with inconsistent datamode 0/31
Dropping SF 2633 with inconsistent datamode 0/31
Dropping SF 2634 with inconsistent datamode 0/31
Dropping SF 2635 with inconsistent datamode 0/31
Dropping SF 2636 with inconsistent datamode 0/31
Dropping SF 2637 with inconsistent datamode 0/31
Dropping SF 2638 with inconsistent datamode 0/31
Dropping SF 2639 with inconsistent datamode 0/31
Dropping SF 2640 with inconsistent datamode 0/31
Dropping SF 2641 with inconsistent datamode 0/31
Dropping SF 2642 with inconsistent datamode 0/31
Dropping SF 2643 with inconsistent datamode 0/31
Dropping SF 2644 with inconsistent datamode 0/31
Dropping SF 2645 with inconsistent datamode 0/31
Dropping SF 2646 with inconsistent datamode 0/31
Dropping SF 2647 with inconsistent datamode 0/31
Dropping SF 2648 with inconsistent datamode 0/31
Dropping SF 2649 with inconsistent datamode 0/31
Dropping SF 2650 with inconsistent datamode 0/31
Dropping SF 2651 with inconsistent datamode 0/31
Dropping SF 2652 with inconsistent datamode 0/31
Dropping SF 2653 with inconsistent datamode 0/31
Dropping SF 2654 with inconsistent datamode 0/31
Dropping SF 2655 with inconsistent datamode 0/31
Dropping SF 2656 with inconsistent datamode 0/31
Dropping SF 2657 with inconsistent datamode 0/31
Dropping SF 2658 with inconsistent datamode 0/31
Dropping SF 2659 with inconsistent datamode 0/31
Dropping SF 2660 with inconsistent datamode 0/31
Dropping SF 2661 with inconsistent datamode 0/31
Dropping SF 2662 with inconsistent datamode 0/31
Dropping SF 2663 with inconsistent datamode 0/31
Dropping SF 2664 with inconsistent datamode 0/31
Dropping SF 2665 with inconsistent datamode 0/31
Dropping SF 2666 with inconsistent datamode 0/31
Dropping SF 2667 with inconsistent datamode 0/31
Dropping SF 2668 with inconsistent datamode 0/31
Dropping SF 2669 with inconsistent datamode 0/31
Dropping SF 2670 with inconsistent datamode 0/31
Dropping SF 2671 with inconsistent datamode 0/31
Dropping SF 2672 with inconsistent datamode 0/31
Dropping SF 2673 with inconsistent datamode 0/31
Dropping SF 2674 with inconsistent datamode 0/31
Dropping SF 2676 with inconsistent datamode 0/31
Dropping SF 2678 with inconsistent datamode 0/31
Dropping SF 2680 with inconsistent datamode 0/31
Dropping SF 2681 with inconsistent datamode 0/31
Dropping SF 2682 with inconsistent datamode 0/31
Dropping SF 2684 with inconsistent datamode 0/31
Dropping SF 2685 with inconsistent datamode 0/31
Dropping SF 2686 with inconsistent datamode 0/31
Dropping SF 2688 with inconsistent CCD ID 1/0
Dropping SF 2689 with inconsistent datamode 0/31
Dropping SF 2691 with inconsistent datamode 0/31
Dropping SF 2692 with synch code word 0 = 255 not 250
Dropping SF 2698 with inconsistent datamode 0/31
Dropping SF 2700 with inconsistent datamode 0/31
Dropping SF 2701 with invalid bit rate 7
63.9996 second gap between superframes 2702 and 2703
Dropping SF 2704 with inconsistent datamode 0/31
SIS0 coordinate error time=197153231.93497 x=511 y=508 pha=0 grade=7
SIS0 coordinate error time=197153231.93497 x=511 y=511 pha=2047 grade=0
SIS0 coordinate error time=197153263.93497 x=511 y=496 pha=0 grade=3
Dropping SF 2707 with inconsistent datamode 0/31
63.9996 second gap between superframes 2708 and 2709
Dropping SF 2717 with synch code word 0 = 254 not 250
Dropping SF 2761 with inconsistent datamode 0/31
Dropping SF 2762 with corrupted frame indicator
Dropping SF 2786 with inconsistent datamode 0/31
Dropping SF 2797 with inconsistent datamode 0/31
Dropping SF 2808 with synch code word 0 = 254 not 250
Dropping SF 2819 with inconsistent SIS mode 2/1
Dropping SF 2834 with corrupted frame indicator
Dropping SF 2838 with inconsistent datamode 0/31
Dropping SF 2855 with inconsistent datamode 0/31
Dropping SF 2856 with inconsistent datamode 0/31
Dropping SF 2857 with inconsistent datamode 0/31
Dropping SF 2858 with inconsistent datamode 0/31
Dropping SF 2861 with inconsistent datamode 0/31
Dropping SF 2862 with inconsistent datamode 0/31
Dropping SF 2865 with inconsistent datamode 0/31
Dropping SF 2866 with inconsistent datamode 0/31
Dropping SF 2867 with inconsistent datamode 0/31
Dropping SF 2868 with inconsistent datamode 0/31
Dropping SF 2869 with inconsistent datamode 0/31
Dropping SF 2870 with inconsistent datamode 0/31
Dropping SF 2871 with inconsistent datamode 0/31
Dropping SF 2873 with inconsistent SIS mode 2/3
Dropping SF 2875 with inconsistent datamode 0/31
Dropping SF 2876 with inconsistent datamode 0/31
Dropping SF 2878 with inconsistent datamode 0/31
Dropping SF 2880 with inconsistent datamode 0/31
Dropping SF 2883 with inconsistent datamode 0/31
Dropping SF 2885 with inconsistent datamode 0/31
Dropping SF 2889 with inconsistent datamode 0/31
Dropping SF 2890 with inconsistent datamode 0/31
Dropping SF 2891 with inconsistent datamode 0/31
Dropping SF 2893 with inconsistent datamode 0/31
Dropping SF 2894 with inconsistent datamode 0/31
Dropping SF 2897 with inconsistent datamode 0/31
Dropping SF 2898 with inconsistent datamode 0/31
Dropping SF 2899 with inconsistent datamode 0/31
Dropping SF 2900 with corrupted frame indicator
Dropping SF 2901 with inconsistent datamode 0/31
Dropping SF 2902 with corrupted frame indicator
Dropping SF 2903 with invalid bit rate 7
Dropping SF 2905 with invalid bit rate 7
SIS0 coordinate error time=197158591.91706 x=511 y=496 pha=0 grade=7
SIS0 coordinate error time=197158623.91706 x=511 y=510 pha=0 grade=7
SIS0 coordinate error time=197158623.91706 x=127 y=511 pha=2047 grade=0
Dropping SF 2907 with inconsistent datamode 0/31
Dropping SF 2908 with inconsistent datamode 0/31
Dropping SF 3036 with corrupted frame indicator
Dropping SF 3261 with corrupted frame indicator
Dropping SF 3273 with inconsistent datamode 0/31
Dropping SF 3288 with inconsistent datamode 0/31
Dropping SF 3290 with inconsistent datamode 0/31
Dropping SF 3291 with inconsistent datamode 0/31
Dropping SF 3292 with inconsistent datamode 0/31
Dropping SF 3293 with inconsistent datamode 0/31
Dropping SF 3294 with inconsistent datamode 0/31
Dropping SF 3295 with inconsistent datamode 0/31
Dropping SF 3296 with inconsistent datamode 0/31
Dropping SF 3297 with inconsistent datamode 0/31
Dropping SF 3298 with inconsistent datamode 0/31
Dropping SF 3299 with inconsistent datamode 0/31
Dropping SF 3300 with inconsistent datamode 0/31
Dropping SF 3301 with inconsistent datamode 0/31
Dropping SF 3302 with inconsistent datamode 0/31
Dropping SF 3303 with inconsistent datamode 0/31
Dropping SF 3304 with inconsistent datamode 0/31
Dropping SF 3305 with inconsistent datamode 0/31
Dropping SF 3306 with inconsistent datamode 0/31
Dropping SF 3307 with inconsistent datamode 0/31
Dropping SF 3308 with inconsistent datamode 0/31
Dropping SF 3309 with inconsistent datamode 0/31
Dropping SF 3311 with inconsistent datamode 0/31
Dropping SF 3313 with inconsistent datamode 0/31
Dropping SF 3314 with inconsistent datamode 0/31
Dropping SF 3315 with inconsistent datamode 0/31
Dropping SF 3316 with inconsistent datamode 0/31
Dropping SF 3317 with inconsistent datamode 0/31
Dropping SF 3318 with inconsistent datamode 0/31
Dropping SF 3319 with inconsistent datamode 0/31
Dropping SF 3320 with synch code word 0 = 251 not 250
Dropping SF 3321 with inconsistent datamode 0/31
Dropping SF 3322 with inconsistent datamode 0/31
Dropping SF 3323 with inconsistent datamode 0/31
Dropping SF 3324 with inconsistent datamode 0/31
Dropping SF 3325 with inconsistent datamode 0/31
Dropping SF 3327 with inconsistent datamode 0/31
Dropping SF 3328 with inconsistent datamode 0/31
Dropping SF 3330 with inconsistent datamode 0/24
Dropping SF 3331 with inconsistent datamode 0/31
Dropping SF 3333 with inconsistent datamode 0/31
Dropping SF 3334 with inconsistent datamode 0/31
Dropping SF 3336 with inconsistent datamode 0/31
Dropping SF 3337 with inconsistent datamode 0/31
Dropping SF 3338 with inconsistent datamode 0/31
Dropping SF 3339 with inconsistent datamode 0/31
Dropping SF 3340 with inconsistent datamode 0/31
Dropping SF 3341 with inconsistent datamode 0/31
Dropping SF 3342 with inconsistent datamode 0/31
Dropping SF 3343 with inconsistent datamode 0/31
Dropping SF 3344 with inconsistent datamode 0/31
Dropping SF 3345 with inconsistent datamode 0/31
Dropping SF 3346 with inconsistent datamode 0/31
Dropping SF 3348 with inconsistent datamode 0/31
Dropping SF 3349 with inconsistent datamode 0/31
Dropping SF 3351 with inconsistent datamode 0/31
Dropping SF 3353 with inconsistent datamode 0/31
Dropping SF 3354 with inconsistent datamode 0/31
Dropping SF 3355 with inconsistent datamode 0/31
Dropping SF 3357 with inconsistent datamode 0/31
Dropping SF 3359 with inconsistent datamode 0/31
Dropping SF 3360 with inconsistent datamode 0/31
Dropping SF 3361 with inconsistent datamode 0/31
Dropping SF 3362 with inconsistent datamode 0/31
Dropping SF 3363 with inconsistent datamode 0/31
Dropping SF 3364 with inconsistent datamode 0/31
Dropping SF 3365 with inconsistent datamode 0/31
Dropping SF 3366 with inconsistent datamode 0/31
Dropping SF 3367 with inconsistent datamode 0/31
Dropping SF 3368 with inconsistent datamode 0/31
Dropping SF 3369 with inconsistent datamode 0/31
Dropping SF 3370 with inconsistent datamode 0/31
Dropping SF 3371 with inconsistent datamode 0/31
Dropping SF 3372 with inconsistent datamode 0/31
Dropping SF 3373 with inconsistent datamode 0/31
Dropping SF 3374 with inconsistent datamode 0/31
Dropping SF 3375 with inconsistent datamode 0/31
Dropping SF 3376 with inconsistent datamode 0/31
Dropping SF 3377 with inconsistent datamode 0/31
Dropping SF 3378 with inconsistent datamode 0/31
Dropping SF 3379 with inconsistent datamode 0/31
Dropping SF 3380 with inconsistent datamode 0/31
Dropping SF 3381 with inconsistent datamode 0/31
Dropping SF 3382 with inconsistent datamode 0/31
Dropping SF 3383 with inconsistent datamode 0/31
Dropping SF 3384 with inconsistent datamode 0/31
Dropping SF 3385 with inconsistent datamode 0/31
Dropping SF 3386 with inconsistent datamode 0/31
Dropping SF 3387 with inconsistent datamode 0/31
Dropping SF 3388 with inconsistent datamode 0/31
Dropping SF 3389 with inconsistent datamode 0/31
Dropping SF 3392 with inconsistent datamode 0/31
Dropping SF 3457 with corrupted frame indicator
Dropping SF 3637 with inconsistent datamode 0/31
Dropping SF 3650 with corrupted frame indicator
Dropping SF 3692 with inconsistent datamode 0/31
Dropping SF 3716 with corrupted frame indicator
Dropping SF 3798 with inconsistent datamode 0/31
Dropping SF 4157 with inconsistent datamode 0/31
Dropping SF 4271 with inconsistent datamode 0/31
Dropping SF 4437 with inconsistent datamode 0/31
Dropping SF 4585 with inconsistent datamode 0/31
Dropping SF 4721 with corrupted frame indicator
Dropping SF 4742 with inconsistent datamode 0/31
Dropping SF 4782 with corrupted frame indicator
Dropping SF 4783 with inconsistent datamode 0/31
Dropping SF 4883 with corrupted frame indicator
Dropping SF 5052 with inconsistent datamode 0/31
Dropping SF 5054 with corrupted frame indicator
5031 of 5294 super frames processed

-> 5% of superframes in ft990401_1421.0120 corrupted
-> Deleting the following files with NEVENTS=0

ft990401_1421_0120G200470H.fits
ft990401_1421_0120G200570L.fits
ft990401_1421_0120G200670M.fits
ft990401_1421_0120G200770L.fits
ft990401_1421_0120G300470H.fits
ft990401_1421_0120G300570L.fits
ft990401_1421_0120G300670M.fits
ft990401_1421_0120G300770L.fits
ft990401_1421_0120S000102M.fits
ft990401_1421_0120S001602L.fits
ft990401_1421_0120S001802L.fits
ft990401_1421_0120S002202L.fits
ft990401_1421_0120S002702H.fits
ft990401_1421_0120S100102M.fits
ft990401_1421_0120S101802L.fits
ft990401_1421_0120S102002M.fits

-> merging GTIs for s0 990401_1421.0120
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990401_1421_0120S0HK.fits
-> Total ONTIME for s0 990401_1421.0120 = 23767.9
-> merging GTIs for s1 990401_1421.0120
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990401_1421_0120S1HK.fits
-> Total ONTIME for s1 990401_1421.0120 = 23851.9
-> merging GTIs for g2 990401_1421.0120
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990401_1421_0120G2HK.fits
-> Total ONTIME for g2 990401_1421.0120 = 24417.9
-> merging GTIs for g3 990401_1421.0120
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990401_1421_0120G3HK.fits
-> Total ONTIME for g3 990401_1421.0120 = 24419.9

Merging event files from frfread (6:21:49)

-> Grouping s0 event files
-> stdout output from group_event_files

1 ft990401_1421_0120S000201H.fits 112536
1 ft990401_1421_0120S000701H.fits 112536
1 ft990401_1421_0120S001301H.fits 112536
1 ft990401_1421_0120S002501H.fits 112536
1 ft990401_1421_0120S002901H.fits 112536
2 ft990401_1421_0120S000402M.fits 79912
2 ft990401_1421_0120S000602M.fits 79912
2 ft990401_1421_0120S000902M.fits 79912
2 ft990401_1421_0120S001002M.fits 79912
2 ft990401_1421_0120S001202M.fits 79912
2 ft990401_1421_0120S002102M.fits 79912
2 ft990401_1421_0120S002302M.fits 79912
2 ft990401_1421_0120S002402M.fits 79912
2 ft990401_1421_0120S002602M.fits 79912
2 ft990401_1421_0120S002802M.fits 79912
2 ft990401_1421_0120S003002M.fits 79912
3 ft990401_1421_0120S000302L.fits 27182
3 ft990401_1421_0120S000502L.fits 27182
3 ft990401_1421_0120S000802L.fits 27182
3 ft990401_1421_0120S001102L.fits 27182
3 ft990401_1421_0120S001402L.fits 27182
3 ft990401_1421_0120S002002L.fits 27182
4 ft990401_1421_0120S001503L.fits 11
4 ft990401_1421_0120S001703L.fits 11
4 ft990401_1421_0120S001903L.fits 11

-> Creating ad57018000s000101h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  5  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 5 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120S000201H.fits 
 2 -- ft990401_1421_0120S000701H.fits 
 3 -- ft990401_1421_0120S001301H.fits 
 4 -- ft990401_1421_0120S002501H.fits 
 5 -- ft990401_1421_0120S002901H.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120S000201H.fits 
 2 -- ft990401_1421_0120S000701H.fits 
 3 -- ft990401_1421_0120S001301H.fits 
 4 -- ft990401_1421_0120S002501H.fits 
 5 -- ft990401_1421_0120S002901H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000s000202m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  11  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 11 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120S000402M.fits 
 2 -- ft990401_1421_0120S000602M.fits 
 3 -- ft990401_1421_0120S000902M.fits 
 4 -- ft990401_1421_0120S001002M.fits 
 5 -- ft990401_1421_0120S001202M.fits 
 6 -- ft990401_1421_0120S002102M.fits 
 7 -- ft990401_1421_0120S002302M.fits 
 8 -- ft990401_1421_0120S002402M.fits 
 9 -- ft990401_1421_0120S002602M.fits 
 10 -- ft990401_1421_0120S002802M.fits 
 11 -- ft990401_1421_0120S003002M.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120S000402M.fits 
 2 -- ft990401_1421_0120S000602M.fits 
 3 -- ft990401_1421_0120S000902M.fits 
 4 -- ft990401_1421_0120S001002M.fits 
 5 -- ft990401_1421_0120S001202M.fits 
 6 -- ft990401_1421_0120S002102M.fits 
 7 -- ft990401_1421_0120S002302M.fits 
 8 -- ft990401_1421_0120S002402M.fits 
 9 -- ft990401_1421_0120S002602M.fits 
 10 -- ft990401_1421_0120S002802M.fits 
 11 -- ft990401_1421_0120S003002M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000s000302l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120S000302L.fits 
 2 -- ft990401_1421_0120S000502L.fits 
 3 -- ft990401_1421_0120S000802L.fits 
 4 -- ft990401_1421_0120S001102L.fits 
 5 -- ft990401_1421_0120S001402L.fits 
 6 -- ft990401_1421_0120S002002L.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120S000302L.fits 
 2 -- ft990401_1421_0120S000502L.fits 
 3 -- ft990401_1421_0120S000802L.fits 
 4 -- ft990401_1421_0120S001102L.fits 
 5 -- ft990401_1421_0120S001402L.fits 
 6 -- ft990401_1421_0120S002002L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 11 events ft990401_1421_0120S001503L.fits ft990401_1421_0120S001703L.fits ft990401_1421_0120S001903L.fits
-> Grouping s1 event files
-> stdout output from group_event_files

1 ft990401_1421_0120S100201H.fits 118855
1 ft990401_1421_0120S100701H.fits 118855
1 ft990401_1421_0120S101001H.fits 118855
1 ft990401_1421_0120S101401H.fits 118855
1 ft990401_1421_0120S102201H.fits 118855
1 ft990401_1421_0120S102601H.fits 118855
2 ft990401_1421_0120S100402M.fits 117068
2 ft990401_1421_0120S100602M.fits 117068
2 ft990401_1421_0120S100902M.fits 117068
2 ft990401_1421_0120S101102M.fits 117068
2 ft990401_1421_0120S101302M.fits 117068
2 ft990401_1421_0120S101702M.fits 117068
2 ft990401_1421_0120S101902M.fits 117068
2 ft990401_1421_0120S102102M.fits 117068
2 ft990401_1421_0120S102302M.fits 117068
2 ft990401_1421_0120S102502M.fits 117068
2 ft990401_1421_0120S102702M.fits 117068
3 ft990401_1421_0120S100302L.fits 36942
3 ft990401_1421_0120S100502L.fits 36942
3 ft990401_1421_0120S100802L.fits 36942
3 ft990401_1421_0120S101202L.fits 36942
3 ft990401_1421_0120S101502L.fits 36942
3 ft990401_1421_0120S101602L.fits 36942
4 ft990401_1421_0120S102402H.fits 46

-> Creating ad57018000s100101h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120S100201H.fits 
 2 -- ft990401_1421_0120S100701H.fits 
 3 -- ft990401_1421_0120S101001H.fits 
 4 -- ft990401_1421_0120S101401H.fits 
 5 -- ft990401_1421_0120S102201H.fits 
 6 -- ft990401_1421_0120S102601H.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120S100201H.fits 
 2 -- ft990401_1421_0120S100701H.fits 
 3 -- ft990401_1421_0120S101001H.fits 
 4 -- ft990401_1421_0120S101401H.fits 
 5 -- ft990401_1421_0120S102201H.fits 
 6 -- ft990401_1421_0120S102601H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000s100202m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  11  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 11 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120S100402M.fits 
 2 -- ft990401_1421_0120S100602M.fits 
 3 -- ft990401_1421_0120S100902M.fits 
 4 -- ft990401_1421_0120S101102M.fits 
 5 -- ft990401_1421_0120S101302M.fits 
 6 -- ft990401_1421_0120S101702M.fits 
 7 -- ft990401_1421_0120S101902M.fits 
 8 -- ft990401_1421_0120S102102M.fits 
 9 -- ft990401_1421_0120S102302M.fits 
 10 -- ft990401_1421_0120S102502M.fits 
 11 -- ft990401_1421_0120S102702M.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120S100402M.fits 
 2 -- ft990401_1421_0120S100602M.fits 
 3 -- ft990401_1421_0120S100902M.fits 
 4 -- ft990401_1421_0120S101102M.fits 
 5 -- ft990401_1421_0120S101302M.fits 
 6 -- ft990401_1421_0120S101702M.fits 
 7 -- ft990401_1421_0120S101902M.fits 
 8 -- ft990401_1421_0120S102102M.fits 
 9 -- ft990401_1421_0120S102302M.fits 
 10 -- ft990401_1421_0120S102502M.fits 
 11 -- ft990401_1421_0120S102702M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000s100302l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120S100302L.fits 
 2 -- ft990401_1421_0120S100502L.fits 
 3 -- ft990401_1421_0120S100802L.fits 
 4 -- ft990401_1421_0120S101202L.fits 
 5 -- ft990401_1421_0120S101502L.fits 
 6 -- ft990401_1421_0120S101602L.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120S100302L.fits 
 2 -- ft990401_1421_0120S100502L.fits 
 3 -- ft990401_1421_0120S100802L.fits 
 4 -- ft990401_1421_0120S101202L.fits 
 5 -- ft990401_1421_0120S101502L.fits 
 6 -- ft990401_1421_0120S101602L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 46 events ft990401_1421_0120S102402H.fits
-> Grouping g2 event files
-> stdout output from group_event_files

1 ft990401_1421_0120G200170M.fits 9904
1 ft990401_1421_0120G201070M.fits 9904
1 ft990401_1421_0120G201770M.fits 9904
1 ft990401_1421_0120G202070M.fits 9904
1 ft990401_1421_0120G202270M.fits 9904
1 ft990401_1421_0120G202470M.fits 9904
1 ft990401_1421_0120G202670M.fits 9904
1 ft990401_1421_0120G202870M.fits 9904
1 ft990401_1421_0120G203870M.fits 9904
1 ft990401_1421_0120G204070M.fits 9904
1 ft990401_1421_0120G204470M.fits 9904
1 ft990401_1421_0120G204670M.fits 9904
1 ft990401_1421_0120G204870M.fits 9904
1 ft990401_1421_0120G205170M.fits 9904
1 ft990401_1421_0120G205370M.fits 9904
2 ft990401_1421_0120G200270H.fits 8462
2 ft990401_1421_0120G201170H.fits 8462
2 ft990401_1421_0120G202370H.fits 8462
2 ft990401_1421_0120G202970H.fits 8462
2 ft990401_1421_0120G204570H.fits 8462
2 ft990401_1421_0120G204770H.fits 8462
2 ft990401_1421_0120G204970H.fits 8462
2 ft990401_1421_0120G205270H.fits 8462
3 ft990401_1421_0120G200970L.fits 4418
3 ft990401_1421_0120G201370L.fits 4418
3 ft990401_1421_0120G202770L.fits 4418
3 ft990401_1421_0120G203370L.fits 4418
3 ft990401_1421_0120G203770L.fits 4418
3 ft990401_1421_0120G204170L.fits 4418
4 ft990401_1421_0120G201270L.fits 421
4 ft990401_1421_0120G203070L.fits 421
5 ft990401_1421_0120G203170L.fits 125
6 ft990401_1421_0120G203470L.fits 113
6 ft990401_1421_0120G203670L.fits 113
7 ft990401_1421_0120G203270L.fits 107
8 ft990401_1421_0120G204270L.fits 107
9 ft990401_1421_0120G200870L.fits 75
10 ft990401_1421_0120G203570L.fits 44
11 ft990401_1421_0120G201970M.fits 34
12 ft990401_1421_0120G202570M.fits 34
13 ft990401_1421_0120G201670M.fits 30
13 ft990401_1421_0120G205070M.fits 30
14 ft990401_1421_0120G201870M.fits 15
15 ft990401_1421_0120G201470M.fits 14
16 ft990401_1421_0120G202170M.fits 14
17 ft990401_1421_0120G204370M.fits 13
18 ft990401_1421_0120G201570M.fits 11
19 ft990401_1421_0120G203970M.fits 11
20 ft990401_1421_0120G200370H.fits 1

-> Creating ad57018000g200170m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  15  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 15 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120G200170M.fits 
 2 -- ft990401_1421_0120G201070M.fits 
 3 -- ft990401_1421_0120G201770M.fits 
 4 -- ft990401_1421_0120G202070M.fits 
 5 -- ft990401_1421_0120G202270M.fits 
 6 -- ft990401_1421_0120G202470M.fits 
 7 -- ft990401_1421_0120G202670M.fits 
 8 -- ft990401_1421_0120G202870M.fits 
 9 -- ft990401_1421_0120G203870M.fits 
 10 -- ft990401_1421_0120G204070M.fits 
 11 -- ft990401_1421_0120G204470M.fits 
 12 -- ft990401_1421_0120G204670M.fits 
 13 -- ft990401_1421_0120G204870M.fits 
 14 -- ft990401_1421_0120G205170M.fits 
 15 -- ft990401_1421_0120G205370M.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120G200170M.fits 
 2 -- ft990401_1421_0120G201070M.fits 
 3 -- ft990401_1421_0120G201770M.fits 
 4 -- ft990401_1421_0120G202070M.fits 
 5 -- ft990401_1421_0120G202270M.fits 
 6 -- ft990401_1421_0120G202470M.fits 
 7 -- ft990401_1421_0120G202670M.fits 
 8 -- ft990401_1421_0120G202870M.fits 
 9 -- ft990401_1421_0120G203870M.fits 
 10 -- ft990401_1421_0120G204070M.fits 
 11 -- ft990401_1421_0120G204470M.fits 
 12 -- ft990401_1421_0120G204670M.fits 
 13 -- ft990401_1421_0120G204870M.fits 
 14 -- ft990401_1421_0120G205170M.fits 
 15 -- ft990401_1421_0120G205370M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000g200270h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 8 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120G200270H.fits 
 2 -- ft990401_1421_0120G201170H.fits 
 3 -- ft990401_1421_0120G202370H.fits 
 4 -- ft990401_1421_0120G202970H.fits 
 5 -- ft990401_1421_0120G204570H.fits 
 6 -- ft990401_1421_0120G204770H.fits 
 7 -- ft990401_1421_0120G204970H.fits 
 8 -- ft990401_1421_0120G205270H.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120G200270H.fits 
 2 -- ft990401_1421_0120G201170H.fits 
 3 -- ft990401_1421_0120G202370H.fits 
 4 -- ft990401_1421_0120G202970H.fits 
 5 -- ft990401_1421_0120G204570H.fits 
 6 -- ft990401_1421_0120G204770H.fits 
 7 -- ft990401_1421_0120G204970H.fits 
 8 -- ft990401_1421_0120G205270H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000g200370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120G200970L.fits 
 2 -- ft990401_1421_0120G201370L.fits 
 3 -- ft990401_1421_0120G202770L.fits 
 4 -- ft990401_1421_0120G203370L.fits 
 5 -- ft990401_1421_0120G203770L.fits 
 6 -- ft990401_1421_0120G204170L.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120G200970L.fits 
 2 -- ft990401_1421_0120G201370L.fits 
 3 -- ft990401_1421_0120G202770L.fits 
 4 -- ft990401_1421_0120G203370L.fits 
 5 -- ft990401_1421_0120G203770L.fits 
 6 -- ft990401_1421_0120G204170L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 421 events ft990401_1421_0120G201270L.fits ft990401_1421_0120G203070L.fits
-> Ignoring the following files containing 125 events ft990401_1421_0120G203170L.fits
-> Ignoring the following files containing 113 events ft990401_1421_0120G203470L.fits ft990401_1421_0120G203670L.fits
-> Ignoring the following files containing 107 events ft990401_1421_0120G203270L.fits
-> Ignoring the following files containing 107 events ft990401_1421_0120G204270L.fits
-> Ignoring the following files containing 75 events ft990401_1421_0120G200870L.fits
-> Ignoring the following files containing 44 events ft990401_1421_0120G203570L.fits
-> Ignoring the following files containing 34 events ft990401_1421_0120G201970M.fits
-> Ignoring the following files containing 34 events ft990401_1421_0120G202570M.fits
-> Ignoring the following files containing 30 events ft990401_1421_0120G201670M.fits ft990401_1421_0120G205070M.fits
-> Ignoring the following files containing 15 events ft990401_1421_0120G201870M.fits
-> Ignoring the following files containing 14 events ft990401_1421_0120G201470M.fits
-> Ignoring the following files containing 14 events ft990401_1421_0120G202170M.fits
-> Ignoring the following files containing 13 events ft990401_1421_0120G204370M.fits
-> Ignoring the following files containing 11 events ft990401_1421_0120G201570M.fits
-> Ignoring the following files containing 11 events ft990401_1421_0120G203970M.fits
-> Ignoring the following files containing 1 events ft990401_1421_0120G200370H.fits
-> Grouping g3 event files
-> stdout output from group_event_files

1 ft990401_1421_0120G300170M.fits 9659
1 ft990401_1421_0120G301070M.fits 9659
1 ft990401_1421_0120G301770M.fits 9659
1 ft990401_1421_0120G301970M.fits 9659
1 ft990401_1421_0120G302170M.fits 9659
1 ft990401_1421_0120G302570M.fits 9659
1 ft990401_1421_0120G303170M.fits 9659
1 ft990401_1421_0120G303370M.fits 9659
1 ft990401_1421_0120G303570M.fits 9659
1 ft990401_1421_0120G303770M.fits 9659
1 ft990401_1421_0120G303970M.fits 9659
1 ft990401_1421_0120G304270M.fits 9659
1 ft990401_1421_0120G304470M.fits 9659
2 ft990401_1421_0120G300270H.fits 8001
2 ft990401_1421_0120G301170H.fits 8001
2 ft990401_1421_0120G302070H.fits 8001
2 ft990401_1421_0120G302670H.fits 8001
2 ft990401_1421_0120G303670H.fits 8001
2 ft990401_1421_0120G303870H.fits 8001
2 ft990401_1421_0120G304070H.fits 8001
2 ft990401_1421_0120G304370H.fits 8001
3 ft990401_1421_0120G300970L.fits 4552
3 ft990401_1421_0120G301370L.fits 4552
3 ft990401_1421_0120G302270L.fits 4552
3 ft990401_1421_0120G302470L.fits 4552
3 ft990401_1421_0120G302870L.fits 4552
3 ft990401_1421_0120G303070L.fits 4552
3 ft990401_1421_0120G303470L.fits 4552
4 ft990401_1421_0120G301270L.fits 400
4 ft990401_1421_0120G302770L.fits 400
5 ft990401_1421_0120G300870L.fits 65
6 ft990401_1421_0120G301670M.fits 48
6 ft990401_1421_0120G304170M.fits 48
7 ft990401_1421_0120G302370L.fits 41
8 ft990401_1421_0120G302970L.fits 34
9 ft990401_1421_0120G303270M.fits 26
10 ft990401_1421_0120G301870M.fits 14
11 ft990401_1421_0120G301570M.fits 13
12 ft990401_1421_0120G301470M.fits 11
13 ft990401_1421_0120G300370H.fits 1

-> Creating ad57018000g300170m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  13  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 13 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120G300170M.fits 
 2 -- ft990401_1421_0120G301070M.fits 
 3 -- ft990401_1421_0120G301770M.fits 
 4 -- ft990401_1421_0120G301970M.fits 
 5 -- ft990401_1421_0120G302170M.fits 
 6 -- ft990401_1421_0120G302570M.fits 
 7 -- ft990401_1421_0120G303170M.fits 
 8 -- ft990401_1421_0120G303370M.fits 
 9 -- ft990401_1421_0120G303570M.fits 
 10 -- ft990401_1421_0120G303770M.fits 
 11 -- ft990401_1421_0120G303970M.fits 
 12 -- ft990401_1421_0120G304270M.fits 
 13 -- ft990401_1421_0120G304470M.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120G300170M.fits 
 2 -- ft990401_1421_0120G301070M.fits 
 3 -- ft990401_1421_0120G301770M.fits 
 4 -- ft990401_1421_0120G301970M.fits 
 5 -- ft990401_1421_0120G302170M.fits 
 6 -- ft990401_1421_0120G302570M.fits 
 7 -- ft990401_1421_0120G303170M.fits 
 8 -- ft990401_1421_0120G303370M.fits 
 9 -- ft990401_1421_0120G303570M.fits 
 10 -- ft990401_1421_0120G303770M.fits 
 11 -- ft990401_1421_0120G303970M.fits 
 12 -- ft990401_1421_0120G304270M.fits 
 13 -- ft990401_1421_0120G304470M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000g300270h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 8 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120G300270H.fits 
 2 -- ft990401_1421_0120G301170H.fits 
 3 -- ft990401_1421_0120G302070H.fits 
 4 -- ft990401_1421_0120G302670H.fits 
 5 -- ft990401_1421_0120G303670H.fits 
 6 -- ft990401_1421_0120G303870H.fits 
 7 -- ft990401_1421_0120G304070H.fits 
 8 -- ft990401_1421_0120G304370H.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120G300270H.fits 
 2 -- ft990401_1421_0120G301170H.fits 
 3 -- ft990401_1421_0120G302070H.fits 
 4 -- ft990401_1421_0120G302670H.fits 
 5 -- ft990401_1421_0120G303670H.fits 
 6 -- ft990401_1421_0120G303870H.fits 
 7 -- ft990401_1421_0120G304070H.fits 
 8 -- ft990401_1421_0120G304370H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad57018000g300370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990401_1421_0120G300970L.fits 
 2 -- ft990401_1421_0120G301370L.fits 
 3 -- ft990401_1421_0120G302270L.fits 
 4 -- ft990401_1421_0120G302470L.fits 
 5 -- ft990401_1421_0120G302870L.fits 
 6 -- ft990401_1421_0120G303070L.fits 
 7 -- ft990401_1421_0120G303470L.fits 
Merging binary extension #: 2 
 1 -- ft990401_1421_0120G300970L.fits 
 2 -- ft990401_1421_0120G301370L.fits 
 3 -- ft990401_1421_0120G302270L.fits 
 4 -- ft990401_1421_0120G302470L.fits 
 5 -- ft990401_1421_0120G302870L.fits 
 6 -- ft990401_1421_0120G303070L.fits 
 7 -- ft990401_1421_0120G303470L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 400 events ft990401_1421_0120G301270L.fits ft990401_1421_0120G302770L.fits
-> Ignoring the following files containing 65 events ft990401_1421_0120G300870L.fits
-> Ignoring the following files containing 48 events ft990401_1421_0120G301670M.fits ft990401_1421_0120G304170M.fits
-> Ignoring the following files containing 41 events ft990401_1421_0120G302370L.fits
-> Ignoring the following files containing 34 events ft990401_1421_0120G302970L.fits
-> Ignoring the following files containing 26 events ft990401_1421_0120G303270M.fits
-> Ignoring the following files containing 14 events ft990401_1421_0120G301870M.fits
-> Ignoring the following files containing 13 events ft990401_1421_0120G301570M.fits
-> Ignoring the following files containing 11 events ft990401_1421_0120G301470M.fits
-> Ignoring the following files containing 1 events ft990401_1421_0120G300370H.fits
-> stdout output from tar

a ft990401_1421_0120G200370H.fits 31K
a ft990401_1421_0120G200870L.fits 31K
a ft990401_1421_0120G201270L.fits 37K
a ft990401_1421_0120G201470M.fits 31K
a ft990401_1421_0120G201570M.fits 31K
a ft990401_1421_0120G201670M.fits 31K
a ft990401_1421_0120G201870M.fits 31K
a ft990401_1421_0120G201970M.fits 31K
a ft990401_1421_0120G202170M.fits 31K
a ft990401_1421_0120G202570M.fits 31K
a ft990401_1421_0120G203070L.fits 34K
a ft990401_1421_0120G203170L.fits 34K
a ft990401_1421_0120G203270L.fits 34K
a ft990401_1421_0120G203470L.fits 31K
a ft990401_1421_0120G203570L.fits 31K
a ft990401_1421_0120G203670L.fits 31K
a ft990401_1421_0120G203970M.fits 31K
a ft990401_1421_0120G204270L.fits 34K
a ft990401_1421_0120G204370M.fits 31K
a ft990401_1421_0120G205070M.fits 31K
a ft990401_1421_0120G300370H.fits 31K
a ft990401_1421_0120G300870L.fits 31K
a ft990401_1421_0120G301270L.fits 37K
a ft990401_1421_0120G301470M.fits 31K
a ft990401_1421_0120G301570M.fits 31K
a ft990401_1421_0120G301670M.fits 31K
a ft990401_1421_0120G301870M.fits 31K
a ft990401_1421_0120G302370L.fits 31K
a ft990401_1421_0120G302770L.fits 34K
a ft990401_1421_0120G302970L.fits 31K
a ft990401_1421_0120G303270M.fits 31K
a ft990401_1421_0120G304170M.fits 31K
a ft990401_1421_0120S001503L.fits 26K
a ft990401_1421_0120S001703L.fits 26K
a ft990401_1421_0120S001903L.fits 26K
a ft990401_1421_0120S102402H.fits 29K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (6:23:30)

-> Split threshold for SIS0=40, and SIS1=40
-> Fetching faintdfe.tbl
-> Calculating DFE values for ad57018000s000101h.unf with zerodef=1
-> Converting ad57018000s000101h.unf to ad57018000s000112h.unf
-> Calculating DFE values for ad57018000s000101h.unf with zerodef=2
-> Converting ad57018000s000101h.unf to ad57018000s000102h.unf
-> Calculating DFE values for ad57018000s100101h.unf with zerodef=1
-> Converting ad57018000s100101h.unf to ad57018000s100112h.unf
-> Calculating DFE values for ad57018000s100101h.unf with zerodef=2
-> Converting ad57018000s100101h.unf to ad57018000s100102h.unf

Calibrating the unfiltered event files (6:25:12)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft990401_1421_0120.ghf
-> stdout output from temp2gain

temp2gain V4.6
leapsec FITS data was successfully read

'ft990401_1421.0120' is successfully opened
Data Start Time is 197130102.14 (19990401 142138)
Time Margin 2.0 sec included
Sync error detected in 2400 th SF
Sync error detected in 2465 th SF
Sync error detected in 2519 th SF
Sync error detected in 2537 th SF
Sync error detected in 2593 th SF
Sync error detected in 2611 th SF
Sync error detected in 2698 th SF
Sync error detected in 3139 th SF
'ft990401_1421.0120' EOF detected, sf=5294
Data End Time is 197169642.01 (19990402 012038)
Gain History is written in ft990401_1421_0120.ghf

-> Generating attitude correction table ad57018000_004_bp4.txt
-> Extracting info from ft990401_1421_0120CMHK.fits
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad57018000g200170m.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad57018000g200170m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000g200270h.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad57018000g200270h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000g200370l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad57018000g200370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197150602.56862
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000g300170m.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad57018000g300170m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000g300270h.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad57018000g300270h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000g300370l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad57018000g300370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197150602.56862
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s000101h.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad57018000s000101h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s000102h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s000102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s000112h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s000112h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s000202m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s000202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s000302l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s000302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197150602.56862
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s100101h.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s100101h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s100102h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s100102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s100112h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s100112h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197131920.63060
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s100202m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s100202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197150602.56862
 Detected gap > 15min in attitude file:    197162384.52950
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad57018000s100302l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad57018000s100302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    197150602.56862
 
Detected gap > 15min in attitude file:

Creating filter files (6:30:48)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.253 to working directory
-> Creating ft990401_1421_0120.mkf
-> stdout output from mkfilter2

 
leapsec FITS data was successfully read

S0-HK file: ft990401_1421_0120S0HK.fits

S1-HK file: ft990401_1421_0120S1HK.fits

G2-HK file: ft990401_1421_0120G2HK.fits

G3-HK file: ft990401_1421_0120G3HK.fits

Date and time are: 1999-04-01 14:20:56  mjd=51269.597872

Orbit file name is frf.orbit.253

Epoch of Orbital Elements: 1999-03-29 15:59:59

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa990401_1421.0120

output FITS File: ft990401_1421_0120.mkf

mkfilter2: Warning, faQparam error: time= 1.971300081366e+08 outside range of attitude file

           Euler angles undefined for this bin

mkfilter2: Warning, faQparam error: time= 1.971300401366e+08 outside range of attitude file

           Euler angles undefined for this bin

mkfilter2: Warning, faQparam error: time= 1.971300721366e+08 outside range of attitude file

           Euler angles undefined for this bin

Total 1239 Data bins were processed.

-> Adding deadtime to ft990401_1421_0120.mkf
-> Adding ad57018000_s0.dfe to ft990401_1421_0120.mkf
-> Adding ad57018000_s1.dfe to ft990401_1421_0120.mkf
-> Plotting quantities from ft990401_1421_0120.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (6:36:54)

-> Skipping ad57018000s000101h.unf because of mode
-> Filtering ad57018000s000102h.unf into ad57018000s000102h.evt
-> Calculating statistics for S0_PIXL0
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   6409.4904
 The mean of the selected column is                  49.303772
 The standard deviation of the selected column is    68.017147
 The minimum of selected column is                   16.812555
 The maximum of selected column is                   356.96994
 The number of points used in calculation is              130

-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5823.9884
 The mean of the selected column is                  44.457927
 The standard deviation of the selected column is    66.398385
 The minimum of selected column is                   12.375041
 The maximum of selected column is                   321.62607
 The number of points used in calculation is              131

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0 && S0_PIXL0<253.3 )&&
(S0_PIXL1>0 && S0_PIXL1<243.6 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.71E+04    72380 1100
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          58533     31148              0     27385         0         0
 Writing events file
  31148 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         58533     31148              0     27385         0         0
   in  4022.1     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        31148
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :              63       21897
 Flickering pixels iter, pixels & cnts :   1          55         866
cleaning chip # 1
 Hot pixels & counts                   :              33        7292
 Flickering pixels iter, pixels & cnts :   1          35         354
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :          186
 Number of (internal) image counts   :        31148
 Number of image cts rejected (N, %) :        3040997.63
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           118           68            0            0
 
 Image counts      :         23076         8072            0            0
 Image cts rejected:         22763         7646            0            0
 Image cts rej (%) :         98.64        94.72         0.00         0.00
 
    filtering data...
 
 Total counts      :         23076         8072            0            0
 Total cts rejected:         22763         7646            0            0
 Total cts rej (%) :         98.64        94.72         0.00         0.00
 
 Number of clean counts accepted  :          739
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          186
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad57018000s000102h.evt use_events=no
Wrote cleaned events file to ad57018000s000102h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad57018000s000112h.unf into ad57018000s000112h.evt
-> Calculating statistics for S0_PIXL0
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   6409.4904
 The mean of the selected column is                  49.303772
 The standard deviation of the selected column is    68.017147
 The minimum of selected column is                   16.812555
 The maximum of selected column is                   356.96994
 The number of points used in calculation is              130

-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5823.9884
 The mean of the selected column is                  44.457927
 The standard deviation of the selected column is    66.398385
 The minimum of selected column is                   12.375041
 The maximum of selected column is                   321.62607
 The number of points used in calculation is              131

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0 && S0_PIXL0<253.3 )&&
(S0_PIXL1>0 && S0_PIXL1<243.6 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.71E+04    73454 1100
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          60769     31955              0     28814         0         0
 Writing events file
  31955 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60769     31955              0     28814         0         0
   in  4022.1     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        31955
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :              63       22452
 Flickering pixels iter, pixels & cnts :   1          55         899
cleaning chip # 1
 Hot pixels & counts                   :              33        7451
 Flickering pixels iter, pixels & cnts :   1          36         376
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :          187
 Number of (internal) image counts   :        31955
 Number of image cts rejected (N, %) :        3117897.57
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           118           69            0            0
 
 Image counts      :         23679         8276            0            0
 Image cts rejected:         23351         7827            0            0
 Image cts rej (%) :         98.61        94.57         0.00         0.00
 
    filtering data...
 
 Total counts      :         23679         8276            0            0
 Total cts rejected:         23351         7827            0            0
 Total cts rej (%) :         98.61        94.57         0.00         0.00
 
 Number of clean counts accepted  :          777
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          187
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad57018000s000112h.evt use_events=no
Wrote cleaned events file to ad57018000s000112h.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Filtering ad57018000s000202m.unf into ad57018000s000202m.evt
-> Calculating statistics for S0_PIXL0
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5532.7259
 The mean of the selected column is                  27.389732
 The standard deviation of the selected column is    8.6017713
 The minimum of selected column is                   12.895875
 The maximum of selected column is                   67.562729
 The number of points used in calculation is              202

-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   4230.7694
 The mean of the selected column is                  20.944403
 The standard deviation of the selected column is    8.5349072
 The minimum of selected column is                   8.1562777
 The maximum of selected column is                   76.000259
 The number of points used in calculation is              202

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>1.5 && S0_PIXL0<53.1 )&&
(S0_PIXL1>0 && S0_PIXL1<46.5 )  )
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.10E+05    79912 1100
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          65448     49826              0     15622         0         0
 Writing events file
  49826 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         65448     49826              0     15622         0         0
   in  6419.5     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        49826
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :              65       35840
 Flickering pixels iter, pixels & cnts :   1          38         868
cleaning chip # 1
 Hot pixels & counts                   :              33       11694
 Flickering pixels iter, pixels & cnts :   1          25         392
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :          161
 Number of (internal) image counts   :        49826
 Number of image cts rejected (N, %) :        4879497.93
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           103           58            0            0
 
 Image counts      :         37109        12717            0            0
 Image cts rejected:         36708        12086            0            0
 Image cts rej (%) :         98.92        95.04         0.00         0.00
 
    filtering data...
 
 Total counts      :         37109        12717            0            0
 Total cts rejected:         36708        12086            0            0
 Total cts rej (%) :         98.92        95.04         0.00         0.00
 
 Number of clean counts accepted  :         1032
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          161
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad57018000s000202m.evt use_events=no
Wrote cleaned events file to ad57018000s000202m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad57018000s000302l.unf into ad57018000s000302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&(S0_PIXL1>0)  )&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      LOW         1999-04-01  15:30:05    0.66E+04    27182 1100
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad57018000s000302l.evt use_events=no
Wrote cleaned events file to ad57018000s000302l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad57018000s000302l.evt since it contains 0 events
-> Skipping ad57018000s100101h.unf because of mode
-> Filtering ad57018000s100102h.unf into ad57018000s100102h.evt
-> Calculating statistics for S1_PIXL2
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8972.1240
 The mean of the selected column is                  68.489496
 The standard deviation of the selected column is    94.590471
 The minimum of selected column is                   19.156315
 The maximum of selected column is                   476.22034
 The number of points used in calculation is              131

-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   9021.5930
 The mean of the selected column is                  68.867122
 The standard deviation of the selected column is    90.191812
 The minimum of selected column is                   17.781311
 The maximum of selected column is                   473.34534
 The number of points used in calculation is              131

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL2>0 && S1_PIXL2<352.2 )&&
(S1_PIXL3>0 && S1_PIXL3<339.4 )  )
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.72E+04    86846 0011
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          75077     40722              0     34355         0         0
 Writing events file
  40722 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         75077     40722              0     34355         0         0
   in  4002.1     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        40722
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :              62       18640
 Flickering pixels iter, pixels & cnts :   1          54        1097
cleaning chip # 3
 Hot pixels & counts                   :              65       19620
 Flickering pixels iter, pixels & cnts :   1          39         682
 
 Number of pixels rejected           :          220
 Number of (internal) image counts   :        40722
 Number of image cts rejected (N, %) :        4003998.32
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0          116          104
 
 Image counts      :             0            0        20096        20626
 Image cts rejected:             0            0        19737        20302
 Image cts rej (%) :          0.00         0.00        98.21        98.43
 
    filtering data...
 
 Total counts      :             0            0        20096        20626
 Total cts rejected:             0            0        19737        20302
 Total cts rej (%) :          0.00         0.00        98.21        98.43
 
 Number of clean counts accepted  :          683
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          220
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad57018000s100102h.evt use_events=no
Wrote cleaned events file to ad57018000s100102h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad57018000s100112h.unf into ad57018000s100112h.evt
-> Calculating statistics for S1_PIXL2
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8972.1240
 The mean of the selected column is                  68.489496
 The standard deviation of the selected column is    94.590471
 The minimum of selected column is                   19.156315
 The maximum of selected column is                   476.22034
 The number of points used in calculation is              131

-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   9021.5930
 The mean of the selected column is                  68.867122
 The standard deviation of the selected column is    90.191812
 The minimum of selected column is                   17.781311
 The maximum of selected column is                   473.34534
 The number of points used in calculation is              131

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL2>0 && S1_PIXL2<352.2 )&&
(S1_PIXL3>0 && S1_PIXL3<339.4 )  )
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.72E+04    87604 0011
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          77880     41991              0     35889         0         0
 Writing events file
  41991 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         77880     41991              0     35889         0         0
   in  4002.1     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        41991
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :              63       19480
 Flickering pixels iter, pixels & cnts :   1          53        1153
cleaning chip # 3
 Hot pixels & counts                   :              65       19911
 Flickering pixels iter, pixels & cnts :   1          40         715
 
 Number of pixels rejected           :          221
 Number of (internal) image counts   :        41991
 Number of image cts rejected (N, %) :        4125998.26
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0          116          105
 
 Image counts      :             0            0        21023        20968
 Image cts rejected:             0            0        20633        20626
 Image cts rej (%) :          0.00         0.00        98.14        98.37
 
    filtering data...
 
 Total counts      :             0            0        21023        20968
 Total cts rejected:             0            0        20633        20626
 Total cts rej (%) :          0.00         0.00        98.14        98.37
 
 Number of clean counts accepted  :          732
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          221
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad57018000s100112h.evt use_events=no
Wrote cleaned events file to ad57018000s100112h.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Filtering ad57018000s100202m.unf into ad57018000s100202m.evt
-> Calculating statistics for S1_PIXL2
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   7083.9509
 The mean of the selected column is                  35.069064
 The standard deviation of the selected column is    12.564264
 The minimum of selected column is                   15.968802
 The maximum of selected column is                   87.125290
 The number of points used in calculation is              202

-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   7473.2440
 The mean of the selected column is                  37.180318
 The standard deviation of the selected column is    14.829102
 The minimum of selected column is                   17.406307
 The maximum of selected column is                   108.00037
 The number of points used in calculation is              201

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL2>0 && S1_PIXL2<72.7 )&&
(S1_PIXL3>0 && S1_PIXL3<81.6 )  )
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.10E+05   117068 0011
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          99212     71027              0     28185         0         0
 Writing events file
  71027 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         99212     71027              0     28185         0         0
   in  6287.9     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        71027
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :              71       32751
 Flickering pixels iter, pixels & cnts :   1          56        1603
cleaning chip # 3
 Hot pixels & counts                   :              67       34285
 Flickering pixels iter, pixels & cnts :   1          47        1474
 
 Number of pixels rejected           :          241
 Number of (internal) image counts   :        71027
 Number of image cts rejected (N, %) :        7011398.71
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0          127          114
 
 Image counts      :             0            0        34792        36235
 Image cts rejected:             0            0        34354        35759
 Image cts rej (%) :          0.00         0.00        98.74        98.69
 
    filtering data...
 
 Total counts      :             0            0        34792        36235
 Total cts rejected:             0            0        34354        35759
 Total cts rej (%) :          0.00         0.00        98.74        98.69
 
 Number of clean counts accepted  :          914
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          241
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad57018000s100202m.evt use_events=no
Wrote cleaned events file to ad57018000s100202m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad57018000s100302l.unf into ad57018000s100302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL2>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      LOW         1999-04-01  15:30:05    0.66E+04    36942 0011
Processing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data13/seq_proc/ad0_57018000.004/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data13/seq_proc/ad0_57018000.004/screen_in_event.xs
    reading data file: /data/data13/seq_proc/ad0_57018000.004/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad57018000s100302l.evt use_events=no
Wrote cleaned events file to ad57018000s100302l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad57018000s100302l.evt since it contains 0 events
-> Filtering ad57018000g200170m.unf into ad57018000g200170m.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.96E+04     9904     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9904      3353           4545      2006         0         0
 Writing events file
   3353 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9904      3353           4545      2006         0         0
   in  6991.0     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        3353                3076               277
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad57018000g200170m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad57018000g200270h.unf into ad57018000g200270h.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8462     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8462      2168           4716      1578         0         0
 Writing events file
   2168 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8462      2168           4716      1578         0         0
   in  4380.0     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        2168                2000               168
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000g200270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad57018000g200270h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad57018000g200370l.unf into ad57018000g200370l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.56E+04     4418     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4418        26           2255      2137         0         0
 Writing events file
     26 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4418        26           2255      2137         0         0
   in  63.895     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
          26                  26                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad57018000g200370l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad57018000g300170m.unf into ad57018000g300170m.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.97E+04     9659     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9659      3664           3774      2221         0         0
 Writing events file
   3664 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9659      3664           3774      2221         0         0
   in  7055.0     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        3664                3353               311
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad57018000g300170m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad57018000g300270h.unf into ad57018000g300270h.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8001     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8001      2416           3770      1815         0         0
 Writing events file
   2416 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8001      2416           3770      1815         0         0
   in  4380.0     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        2416                2185               231
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000g300270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad57018000g300270h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad57018000g300370l.unf into ad57018000g300370l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.58E+04     4552     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4552        31           2031      2490         0         0
 Writing events file
     31 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4552        31           2031      2490         0         0
   in  63.895     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
          31                  30                 1
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA > read events ad57018000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad57018000g300370l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

Generating images and exposure maps (6:48:47)

-> Generating exposure map ad57018000g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)

-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad57018000g200170m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000g200170m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8372
 Mean   RA/DEC/ROLL :      288.8553       4.8910     268.8372
 Pnt    RA/DEC/ROLL :      288.8763       4.9256     268.8372
 
 Image rebin factor :             1
 Attitude Records   :         20063
 GTI intervals      :            46
 Total GTI (secs)   :      6991.026
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1055.00      1055.00
  20 Percent Complete: Total/live time:       2450.80      2450.80
  30 Percent Complete: Total/live time:       2450.80      2450.80
  40 Percent Complete: Total/live time:       3103.75      3103.75
  50 Percent Complete: Total/live time:       4058.58      4058.58
  60 Percent Complete: Total/live time:       5871.64      5871.64
  70 Percent Complete: Total/live time:       5871.64      5871.64
  80 Percent Complete: Total/live time:       5874.55      5874.55
  90 Percent Complete: Total/live time:       6926.90      6926.90
 100 Percent Complete: Total/live time:       6991.03      6991.03
 
 Number of attitude steps  used:           18
 Number of attitude steps avail:         6903
 Mean RA/DEC pixel offset:       -6.9451      -3.4346
 
    writing expo file: ad57018000g200170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000g200170m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000g200170m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076      3032             44         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3076      3032             44         0         0         0
   in  6991.0     seconds
 Image            has     3032 counts for 0.4337     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076      1499             44         0         0      1533
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3076      1499             44         0         0      1533
   in  6991.0     seconds
 Image            has     1499 counts for 0.2144     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076      1543             44         0         0      1489
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3076      1543             44         0         0      1489
   in  6991.0     seconds
 Image            has     1543 counts for 0.2207     counts/sec
 Command not found; type ? for a command listing
!ad57018000g200170m:ASCA >
!ad57018000g200170m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000g200170m:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g200170m:ASCA > read events ad57018000g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g200170m:ASCA-GIS2-PH > set image sky
!ad57018000g200170m:ASCA-GIS2-PH > filter region corner_point.reg
!ad57018000g200170m:ASCA-GIS2-PH > extract image
!ad57018000g200170m:ASCA-GIS2-PH > save image outfile=ad57018000g200170_all.img
Wrote image to file ad57018000g200170_all.img
!ad57018000g200170m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad57018000g200170m:ASCA-GIS2-PH > extract image
!ad57018000g200170m:ASCA-GIS2-PH > save image outfile=ad57018000g200170_lo.img
Wrote image to file ad57018000g200170_lo.img
!ad57018000g200170m:ASCA-GIS2-PH > clear pha_cut
!ad57018000g200170m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad57018000g200170m:ASCA-GIS2-PH > extract image
!ad57018000g200170m:ASCA-GIS2-PH > save image outfile=ad57018000g200170_hi.img
Wrote image to file ad57018000g200170_hi.img
!ad57018000g200170m:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad57018000g200270.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad57018000g200270h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000g200270h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8372
 Mean   RA/DEC/ROLL :      288.8547       4.8909     268.8372
 Pnt    RA/DEC/ROLL :      288.8766       4.9299     268.8372
 
 Image rebin factor :             1
 Attitude Records   :         20063
 GTI intervals      :            36
 Total GTI (secs)   :      4379.975
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        643.99       643.99
  20 Percent Complete: Total/live time:       2243.99      2243.99
  30 Percent Complete: Total/live time:       2243.99      2243.99
  40 Percent Complete: Total/live time:       2253.99      2253.99
  50 Percent Complete: Total/live time:       2253.99      2253.99
  60 Percent Complete: Total/live time:       3169.48      3169.48
  70 Percent Complete: Total/live time:       3169.48      3169.48
  80 Percent Complete: Total/live time:       4379.98      4379.98
 100 Percent Complete: Total/live time:       4379.98      4379.98
 
 Number of attitude steps  used:           13
 Number of attitude steps avail:        13318
 Mean RA/DEC pixel offset:      -11.0333      -3.5946
 
    writing expo file: ad57018000g200270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000g200270h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000g200270h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000      1974             26         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2000      1974             26         0         0         0
   in  4380.0     seconds
 Image            has     1974 counts for 0.4507     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000       955             26         0         0      1019
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2000       955             26         0         0      1019
   in  4380.0     seconds
 Image            has      955 counts for 0.2180     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000      1020             26         0         0       954
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2000      1020             26         0         0       954
   in  4380.0     seconds
 Image            has     1020 counts for 0.2329     counts/sec
 Command not found; type ? for a command listing
!ad57018000g200270h:ASCA >
!ad57018000g200270h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000g200270h:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g200270h:ASCA > read events ad57018000g200270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g200270h:ASCA-GIS2-PH > set image sky
!ad57018000g200270h:ASCA-GIS2-PH > filter region corner_point.reg
!ad57018000g200270h:ASCA-GIS2-PH > extract image
!ad57018000g200270h:ASCA-GIS2-PH > save image outfile=ad57018000g200270_all.img
Wrote image to file ad57018000g200270_all.img
!ad57018000g200270h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad57018000g200270h:ASCA-GIS2-PH > extract image
!ad57018000g200270h:ASCA-GIS2-PH > save image outfile=ad57018000g200270_lo.img
Wrote image to file ad57018000g200270_lo.img
!ad57018000g200270h:ASCA-GIS2-PH > clear pha_cut
!ad57018000g200270h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad57018000g200270h:ASCA-GIS2-PH > extract image
!ad57018000g200270h:ASCA-GIS2-PH > save image outfile=ad57018000g200270_hi.img
Wrote image to file ad57018000g200270_hi.img
!ad57018000g200270h:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad57018000g200370.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad57018000g200370l.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000g200370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8372
 Mean   RA/DEC/ROLL :      288.8553       4.8914     268.8372
 Pnt    RA/DEC/ROLL :      288.8715       4.9345     268.8372
 
 Image rebin factor :             1
 Attitude Records   :         20063
 GTI intervals      :             2
 Total GTI (secs)   :        63.895
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         10.98        10.98
  20 Percent Complete: Total/live time:         31.98        31.98
  30 Percent Complete: Total/live time:         31.98        31.98
  40 Percent Complete: Total/live time:         42.90        42.90
  50 Percent Complete: Total/live time:         42.90        42.90
  60 Percent Complete: Total/live time:         63.90        63.90
 100 Percent Complete: Total/live time:         63.90        63.90
 
 Number of attitude steps  used:            4
 Number of attitude steps avail:          293
 Mean RA/DEC pixel offset:       -9.1910      -2.8618
 
    writing expo file: ad57018000g200370.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000g200370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000g200370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       26     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26        26              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            26        26              0         0         0         0
   in  63.895     seconds
 Image            has       26 counts for 0.4069     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26         9              0         0         0        17
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            26         9              0         0         0        17
   in  63.895     seconds
 Image            has        9 counts for 0.1409     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26        17              0         0         0         9
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            26        17              0         0         0         9
   in  63.895     seconds
 Image            has       17 counts for 0.2661     counts/sec
 Command not found; type ? for a command listing
!ad57018000g200370l:ASCA >
!ad57018000g200370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000g200370l:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g200370l:ASCA > read events ad57018000g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g200370l:ASCA-GIS2-PH > set image sky
!ad57018000g200370l:ASCA-GIS2-PH > filter region corner_point.reg
!ad57018000g200370l:ASCA-GIS2-PH > extract image
!ad57018000g200370l:ASCA-GIS2-PH > save image outfile=ad57018000g200370_all.img
Wrote image to file ad57018000g200370_all.img
!ad57018000g200370l:ASCA-GIS2-PH > filter pha_cut 0 170
!ad57018000g200370l:ASCA-GIS2-PH > extract image
!ad57018000g200370l:ASCA-GIS2-PH > save image outfile=ad57018000g200370_lo.img
Wrote image to file ad57018000g200370_lo.img
!ad57018000g200370l:ASCA-GIS2-PH > clear pha_cut
!ad57018000g200370l:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad57018000g200370l:ASCA-GIS2-PH > extract image
!ad57018000g200370l:ASCA-GIS2-PH > save image outfile=ad57018000g200370_hi.img
Wrote image to file ad57018000g200370_hi.img
!ad57018000g200370l:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad57018000g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)

-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad57018000g300170m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000g300170m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8375
 Mean   RA/DEC/ROLL :      288.8583       4.9157     268.8375
 Pnt    RA/DEC/ROLL :      288.8734       4.9010     268.8375
 
 Image rebin factor :             1
 Attitude Records   :         20063
 GTI intervals      :            45
 Total GTI (secs)   :      7055.026
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1055.00      1055.00
  20 Percent Complete: Total/live time:       2450.80      2450.80
  30 Percent Complete: Total/live time:       2450.80      2450.80
  40 Percent Complete: Total/live time:       3167.75      3167.75
  50 Percent Complete: Total/live time:       4122.58      4122.58
  60 Percent Complete: Total/live time:       5935.64      5935.64
  70 Percent Complete: Total/live time:       5935.64      5935.64
  80 Percent Complete: Total/live time:       5938.55      5938.55
  90 Percent Complete: Total/live time:       6990.90      6990.90
 100 Percent Complete: Total/live time:       7055.03      7055.03
 
 Number of attitude steps  used:           18
 Number of attitude steps avail:         6903
 Mean RA/DEC pixel offset:        4.4625      -2.3013
 
    writing expo file: ad57018000g300170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000g300170m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000g300170m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353      3307             46         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3353      3307             46         0         0         0
   in  7055.0     seconds
 Image            has     3307 counts for 0.4687     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353      1694             46         0         0      1613
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3353      1694             46         0         0      1613
   in  7055.0     seconds
 Image            has     1694 counts for 0.2401     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353      1622             46         0         0      1685
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3353      1622             46         0         0      1685
   in  7055.0     seconds
 Image            has     1622 counts for 0.2299     counts/sec
 Command not found; type ? for a command listing
!ad57018000g300170m:ASCA >
!ad57018000g300170m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000g300170m:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g300170m:ASCA > read events ad57018000g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g300170m:ASCA-GIS3-PH > set image sky
!ad57018000g300170m:ASCA-GIS3-PH > filter region corner_point.reg
!ad57018000g300170m:ASCA-GIS3-PH > extract image
!ad57018000g300170m:ASCA-GIS3-PH > save image outfile=ad57018000g300170_all.img
Wrote image to file ad57018000g300170_all.img
!ad57018000g300170m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad57018000g300170m:ASCA-GIS3-PH > extract image
!ad57018000g300170m:ASCA-GIS3-PH > save image outfile=ad57018000g300170_lo.img
Wrote image to file ad57018000g300170_lo.img
!ad57018000g300170m:ASCA-GIS3-PH > clear pha_cut
!ad57018000g300170m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad57018000g300170m:ASCA-GIS3-PH > extract image
!ad57018000g300170m:ASCA-GIS3-PH > save image outfile=ad57018000g300170_hi.img
Wrote image to file ad57018000g300170_hi.img
!ad57018000g300170m:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad57018000g300270.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad57018000g300270h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000g300270h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8376
 Mean   RA/DEC/ROLL :      288.8577       4.9156     268.8376
 Pnt    RA/DEC/ROLL :      288.8736       4.9053     268.8376
 
 Image rebin factor :             1
 Attitude Records   :         20063
 GTI intervals      :            36
 Total GTI (secs)   :      4379.975
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        643.99       643.99
  20 Percent Complete: Total/live time:       2243.99      2243.99
  30 Percent Complete: Total/live time:       2243.99      2243.99
  40 Percent Complete: Total/live time:       2253.99      2253.99
  50 Percent Complete: Total/live time:       2253.99      2253.99
  60 Percent Complete: Total/live time:       3169.48      3169.48
  70 Percent Complete: Total/live time:       3169.48      3169.48
  80 Percent Complete: Total/live time:       4379.98      4379.98
 100 Percent Complete: Total/live time:       4379.98      4379.98
 
 Number of attitude steps  used:           13
 Number of attitude steps avail:        13318
 Mean RA/DEC pixel offset:        0.1162      -2.4870
 
    writing expo file: ad57018000g300270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000g300270h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000g300270h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185      2154             31         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2185      2154             31         0         0         0
   in  4380.0     seconds
 Image            has     2154 counts for 0.4918     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185      1119             31         0         0      1035
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2185      1119             31         0         0      1035
   in  4380.0     seconds
 Image            has     1119 counts for 0.2555     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185      1044             31         0         0      1110
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2185      1044             31         0         0      1110
   in  4380.0     seconds
 Image            has     1044 counts for 0.2384     counts/sec
 Command not found; type ? for a command listing
!ad57018000g300270h:ASCA >
!ad57018000g300270h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000g300270h:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g300270h:ASCA > read events ad57018000g300270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g300270h:ASCA-GIS3-PH > set image sky
!ad57018000g300270h:ASCA-GIS3-PH > filter region corner_point.reg
!ad57018000g300270h:ASCA-GIS3-PH > extract image
!ad57018000g300270h:ASCA-GIS3-PH > save image outfile=ad57018000g300270_all.img
Wrote image to file ad57018000g300270_all.img
!ad57018000g300270h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad57018000g300270h:ASCA-GIS3-PH > extract image
!ad57018000g300270h:ASCA-GIS3-PH > save image outfile=ad57018000g300270_lo.img
Wrote image to file ad57018000g300270_lo.img
!ad57018000g300270h:ASCA-GIS3-PH > clear pha_cut
!ad57018000g300270h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad57018000g300270h:ASCA-GIS3-PH > extract image
!ad57018000g300270h:ASCA-GIS3-PH > save image outfile=ad57018000g300270_hi.img
Wrote image to file ad57018000g300270_hi.img
!ad57018000g300270h:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad57018000g300370.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad57018000g300370l.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000g300370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8375
 Mean   RA/DEC/ROLL :      288.8583       4.9160     268.8375
 Pnt    RA/DEC/ROLL :      288.8685       4.9098     268.8375
 
 Image rebin factor :             1
 Attitude Records   :         20063
 GTI intervals      :             2
 Total GTI (secs)   :        63.895
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         10.98        10.98
  20 Percent Complete: Total/live time:         31.98        31.98
  30 Percent Complete: Total/live time:         31.98        31.98
  40 Percent Complete: Total/live time:         42.90        42.90
  50 Percent Complete: Total/live time:         42.90        42.90
  60 Percent Complete: Total/live time:         63.90        63.90
 100 Percent Complete: Total/live time:         63.90        63.90
 
 Number of attitude steps  used:            4
 Number of attitude steps avail:          293
 Mean RA/DEC pixel offset:       -0.1321      -1.9619
 
    writing expo file: ad57018000g300370.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000g300370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000g300370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       30     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30        30              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            30        30              0         0         0         0
   in  63.895     seconds
 Image            has       30 counts for 0.4695     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30        14              0         0         0        16
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            30        14              0         0         0        16
   in  63.895     seconds
 Image            has       14 counts for 0.2191     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30        16              0         0         0        14
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            30        16              0         0         0        14
   in  63.895     seconds
 Image            has       16 counts for 0.2504     counts/sec
 Command not found; type ? for a command listing
!ad57018000g300370l:ASCA >
!ad57018000g300370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000g300370l:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g300370l:ASCA > read events ad57018000g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000g300370l:ASCA-GIS3-PH > set image sky
!ad57018000g300370l:ASCA-GIS3-PH > filter region corner_point.reg
!ad57018000g300370l:ASCA-GIS3-PH > extract image
!ad57018000g300370l:ASCA-GIS3-PH > save image outfile=ad57018000g300370_all.img
Wrote image to file ad57018000g300370_all.img
!ad57018000g300370l:ASCA-GIS3-PH > filter pha_cut 0 170
!ad57018000g300370l:ASCA-GIS3-PH > extract image
!ad57018000g300370l:ASCA-GIS3-PH > save image outfile=ad57018000g300370_lo.img
Wrote image to file ad57018000g300370_lo.img
!ad57018000g300370l:ASCA-GIS3-PH > clear pha_cut
!ad57018000g300370l:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad57018000g300370l:ASCA-GIS3-PH > extract image
!ad57018000g300370l:ASCA-GIS3-PH > save image outfile=ad57018000g300370_hi.img
Wrote image to file ad57018000g300370_hi.img
!ad57018000g300370l:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad57018000s000102.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad57018000s000102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000s000102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8361
 Mean   RA/DEC/ROLL :      288.8407       4.9041     268.8361
 Pnt    RA/DEC/ROLL :      288.8905       4.9171     268.8361
 
 Image rebin factor :             4
 Attitude Records   :         20063
 Hot Pixels         :           186
 GTI intervals      :            11
 Total GTI (secs)   :      4022.137
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        710.14       710.14
  20 Percent Complete: Total/live time:       1072.61      1072.61
  30 Percent Complete: Total/live time:       1518.11      1518.11
  40 Percent Complete: Total/live time:       2168.10      2168.10
  50 Percent Complete: Total/live time:       2168.10      2168.10
  60 Percent Complete: Total/live time:       3070.51      3070.51
  70 Percent Complete: Total/live time:       3070.51      3070.51
  80 Percent Complete: Total/live time:       3262.14      3262.14
  90 Percent Complete: Total/live time:       4022.14      4022.14
 100 Percent Complete: Total/live time:       4022.14      4022.14
 
 Number of attitude steps  used:           18
 Number of attitude steps avail:        10328
 Mean RA/DEC pixel offset:      -49.9382     -95.3571
 
    writing expo file: ad57018000s000102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000s000102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000s000102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      739 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            739       739              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           739       739              0         0         0         0
   in  4022.1     seconds
 Image            has      739 counts for 0.1837     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            739       533              0         0         0       206
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           739       533              0         0         0       206
   in  4022.1     seconds
 Image            has      533 counts for 0.1325     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            739       206              0         0         0       533
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           739       206              0         0         0       533
   in  4022.1     seconds
 Image            has      206 counts for 5.1217E-02 counts/sec
 Command not found; type ? for a command listing
!ad57018000s000102h:ASCA >
!ad57018000s000102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000s000102h:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s000102h:ASCA > read events ad57018000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad57018000s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad57018000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad57018000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad57018000s000102_all.img
Wrote image to file ad57018000s000102_all.img
!ad57018000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad57018000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad57018000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad57018000s000102_lo.img
Wrote image to file ad57018000s000102_lo.img
!ad57018000s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad57018000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad57018000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad57018000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad57018000s000102_hi.img
Wrote image to file ad57018000s000102_hi.img
!ad57018000s000102h:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad57018000s000202.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad57018000s000202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000s000202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:           ON          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8369
 Mean   RA/DEC/ROLL :      288.8416       4.9028     268.8369
 Pnt    RA/DEC/ROLL :      288.8857       4.9220     268.8369
 
 Image rebin factor :             4
 Attitude Records   :         20063
 Hot Pixels         :           161
 GTI intervals      :            40
 Total GTI (secs)   :      6419.540
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        990.97       990.97
  20 Percent Complete: Total/live time:       2288.00      2288.00
  30 Percent Complete: Total/live time:       2288.00      2288.00
  40 Percent Complete: Total/live time:       2950.95      2950.95
  50 Percent Complete: Total/live time:       3778.94      3778.94
  60 Percent Complete: Total/live time:       5416.00      5416.00
  70 Percent Complete: Total/live time:       5416.00      5416.00
  80 Percent Complete: Total/live time:       5425.13      5425.13
  90 Percent Complete: Total/live time:       6419.54      6419.54
 100 Percent Complete: Total/live time:       6419.54      6419.54
 
 Number of attitude steps  used:           15
 Number of attitude steps avail:         5567
 Mean RA/DEC pixel offset:      -52.2481     -92.3644
 
    writing expo file: ad57018000s000202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000s000202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.64E+04     1032 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1032      1032              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1032      1032              0         0         0         0
   in  6419.5     seconds
 Image            has     1032 counts for 0.1608     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1032       711              0         0         0       321
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1032       711              0         0         0       321
   in  6419.5     seconds
 Image            has      711 counts for 0.1108     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1032       324              0         0         0       708
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1032       324              0         0         0       708
   in  6419.5     seconds
 Image            has      324 counts for 5.0471E-02 counts/sec
 Command not found; type ? for a command listing
!ad57018000s000202m:ASCA >
!ad57018000s000202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000s000202m:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s000202m:ASCA > read events ad57018000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s000202m:ASCA-SIS0-BRIGHT > set image sky
!ad57018000s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad57018000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad57018000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad57018000s000202_all.img
Wrote image to file ad57018000s000202_all.img
!ad57018000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad57018000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad57018000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad57018000s000202_lo.img
Wrote image to file ad57018000s000202_lo.img
!ad57018000s000202m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad57018000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad57018000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad57018000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad57018000s000202_hi.img
Wrote image to file ad57018000s000202_hi.img
!ad57018000s000202m:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad57018000s100102.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad57018000s100102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000s100102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF          ON          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8375
 Mean   RA/DEC/ROLL :      288.8564       4.9030     268.8375
 Pnt    RA/DEC/ROLL :      288.8746       4.9184     268.8375
 
 Image rebin factor :             4
 Attitude Records   :         20063
 Hot Pixels         :           220
 GTI intervals      :            10
 Total GTI (secs)   :      4002.137
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        718.14       718.14
  20 Percent Complete: Total/live time:       1080.61      1080.61
  30 Percent Complete: Total/live time:       1526.11      1526.11
  40 Percent Complete: Total/live time:       2176.10      2176.10
  50 Percent Complete: Total/live time:       2176.10      2176.10
  60 Percent Complete: Total/live time:       3050.51      3050.51
  70 Percent Complete: Total/live time:       3050.51      3050.51
  80 Percent Complete: Total/live time:       3246.14      3246.14
  90 Percent Complete: Total/live time:       4002.14      4002.14
 100 Percent Complete: Total/live time:       4002.14      4002.14
 
 Number of attitude steps  used:           18
 Number of attitude steps avail:        10328
 Mean RA/DEC pixel offset:      -54.1356     -27.4977
 
    writing expo file: ad57018000s100102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000s100102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000s100102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      683 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            683       683              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           683       683              0         0         0         0
   in  4002.1     seconds
 Image            has      683 counts for 0.1707     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            683       428              0         0         0       255
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           683       428              0         0         0       255
   in  4002.1     seconds
 Image            has      428 counts for 0.1069     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            683       256              0         0         0       427
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           683       256              0         0         0       427
   in  4002.1     seconds
 Image            has      256 counts for 6.3966E-02 counts/sec
 Command not found; type ? for a command listing
!ad57018000s100102h:ASCA >
!ad57018000s100102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000s100102h:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s100102h:ASCA > read events ad57018000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad57018000s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad57018000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad57018000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad57018000s100102_all.img
Wrote image to file ad57018000s100102_all.img
!ad57018000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad57018000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad57018000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad57018000s100102_lo.img
Wrote image to file ad57018000s100102_lo.img
!ad57018000s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad57018000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad57018000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad57018000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad57018000s100102_hi.img
Wrote image to file ad57018000s100102_hi.img
!ad57018000s100102h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Generating exposure map ad57018000s100202.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad57018000s100202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad57018000s100202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF          ON          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990401_1421.0120
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      288.8636       4.9150     268.8382
 Mean   RA/DEC/ROLL :      288.8575       4.9015     268.8382
 Pnt    RA/DEC/ROLL :      288.8698       4.9233     268.8382
 
 Image rebin factor :             4
 Attitude Records   :         20063
 Hot Pixels         :           241
 GTI intervals      :            38
 Total GTI (secs)   :      6287.869
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        990.97       990.97
  20 Percent Complete: Total/live time:       2238.17      2238.17
  30 Percent Complete: Total/live time:       2238.17      2238.17
  40 Percent Complete: Total/live time:       2597.12      2597.12
  50 Percent Complete: Total/live time:       3751.28      3751.28
  60 Percent Complete: Total/live time:       5324.35      5324.35
  70 Percent Complete: Total/live time:       5324.35      5324.35
  80 Percent Complete: Total/live time:       5333.47      5333.47
  90 Percent Complete: Total/live time:       6287.87      6287.87
 100 Percent Complete: Total/live time:       6287.87      6287.87
 
 Number of attitude steps  used:           17
 Number of attitude steps avail:         5572
 Mean RA/DEC pixel offset:      -56.7112     -25.5055
 
    writing expo file: ad57018000s100202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad57018000s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad57018000s100202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.63E+04      914 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            914       914              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           914       914              0         0         0         0
   in  6287.9     seconds
 Image            has      914 counts for 0.1454     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            914       599              0         0         0       315
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           914       599              0         0         0       315
   in  6287.9     seconds
 Image            has      599 counts for 9.5263E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            914       319              0         0         0       595
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           914       319              0         0         0       595
   in  6287.9     seconds
 Image            has      319 counts for 5.0733E-02 counts/sec
 Command not found; type ? for a command listing
!ad57018000s100202m:ASCA >
!ad57018000s100202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad57018000s100202m:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s100202m:ASCA > read events ad57018000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!ad57018000s100202m:ASCA-SIS1-BRIGHT > set image sky
!ad57018000s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad57018000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad57018000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad57018000s100202_all.img
Wrote image to file ad57018000s100202_all.img
!ad57018000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad57018000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad57018000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad57018000s100202_lo.img
Wrote image to file ad57018000s100202_lo.img
!ad57018000s100202m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad57018000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad57018000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad57018000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad57018000s100202_hi.img
Wrote image to file ad57018000s100202_hi.img
!ad57018000s100202m:ASCA-SIS1-BRIGHT > exit save_session=no

-> Summing sis images
-> Exposure for ad57018000s000102.expo is 4022.136963 seconds
-> Exposure for ad57018000s000202.expo is 6419.539551 seconds
-> Exposure for ad57018000s100102.expo is 4002.136719 seconds
-> Exposure for ad57018000s100202.expo is 6287.868652 seconds
-> Summing the following images to produce ad57018000sis32002.totexpo

ad57018000s000102.expo
ad57018000s000202.expo
ad57018000s100102.expo
ad57018000s100202.expo

-> Setting EXPOSURE=20731.681885 in ad57018000sis32002.totexpo
-> Exposure for ad57018000s000102_all.img is 4.022136762529612E+03 seconds
-> ad57018000s000102_all.img has 739 counts
-> Exposure for ad57018000s000202_all.img is 6.419539527028799E+03 seconds
-> ad57018000s000202_all.img has 1032 counts
-> Exposure for ad57018000s100102_all.img is 4.002136715412140E+03 seconds
-> ad57018000s100102_all.img has 683 counts
-> Exposure for ad57018000s100202_all.img is 6.287868535637856E+03 seconds
-> ad57018000s100202_all.img has 914 counts
-> Summing the following images to produce ad57018000sis32002_all.totsky

ad57018000s000102_all.img
ad57018000s000202_all.img
ad57018000s100102_all.img
ad57018000s100202_all.img

-> Setting EXPOSURE=20731.6815406084 in ad57018000sis32002_all.totsky
-> Setting TOTCTS=3368 in ad57018000sis32002_all.totsky
-> Exposure for ad57018000s000102_lo.img is 4.022136762529612E+03 seconds
-> ad57018000s000102_lo.img has 533 counts
-> Exposure for ad57018000s000202_lo.img is 6.419539527028799E+03 seconds
-> ad57018000s000202_lo.img has 711 counts
-> Exposure for ad57018000s100102_lo.img is 4.002136715412140E+03 seconds
-> ad57018000s100102_lo.img has 428 counts
-> Exposure for ad57018000s100202_lo.img is 6.287868535637856E+03 seconds
-> ad57018000s100202_lo.img has 599 counts
-> Summing the following images to produce ad57018000sis32002_lo.totsky

ad57018000s000102_lo.img
ad57018000s000202_lo.img
ad57018000s100102_lo.img
ad57018000s100202_lo.img

-> Setting EXPOSURE=20731.6815406084 in ad57018000sis32002_lo.totsky
-> Setting TOTCTS=2271 in ad57018000sis32002_lo.totsky
-> Exposure for ad57018000s000102_hi.img is 4.022136762529612E+03 seconds
-> ad57018000s000102_hi.img has 206 counts
-> Exposure for ad57018000s000202_hi.img is 6.419539527028799E+03 seconds
-> ad57018000s000202_hi.img has 324 counts
-> Exposure for ad57018000s100102_hi.img is 4.002136715412140E+03 seconds
-> ad57018000s100102_hi.img has 256 counts
-> Exposure for ad57018000s100202_hi.img is 6.287868535637856E+03 seconds
-> ad57018000s100202_hi.img has 319 counts
-> Summing the following images to produce ad57018000sis32002_hi.totsky

ad57018000s000102_hi.img
ad57018000s000202_hi.img
ad57018000s100102_hi.img
ad57018000s100202_hi.img

-> Setting EXPOSURE=20731.6815406084 in ad57018000sis32002_hi.totsky
-> Setting TOTCTS=1105 in ad57018000sis32002_hi.totsky
-> Running XIMAGE to create ad57018000sis32002.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad57018000sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 4.0000000
 Saving current map
![2]XIMAGE> read/expo ad57018000sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 345.52802
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     12.5000
  Min and max :   0  7
 Max-preserving scaling factor :     7.1428571
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     41920.0
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

-> Summing gis images
-> Exposure for ad57018000g200170.expo is 6991.026855 seconds
-> Exposure for ad57018000g200270.expo is 4379.975098 seconds
-> Exposure for ad57018000g200370.expo is 63.895256 seconds
-> Exposure for ad57018000g300170.expo is 7055.026367 seconds
-> Exposure for ad57018000g300270.expo is 4379.975098 seconds
-> Exposure for ad57018000g300370.expo is 63.895256 seconds
-> Summing the following images to produce ad57018000gis25670.totexpo

ad57018000g200170.expo
ad57018000g200270.expo
ad57018000g200370.expo
ad57018000g300170.expo
ad57018000g300270.expo
ad57018000g300370.expo

-> Setting EXPOSURE=22933.79393 in ad57018000gis25670.totexpo
-> Exposure for ad57018000g200170_all.img is 6.991026521891356E+03 seconds
-> ad57018000g200170_all.img has 3032 counts
-> Exposure for ad57018000g200270_all.img is 4.379974911391735E+03 seconds
-> ad57018000g200270_all.img has 1974 counts
-> Exposure for ad57018000g200370_all.img is 6.389525595307350E+01 seconds
-> ad57018000g200370_all.img has 26 counts
-> Exposure for ad57018000g300170_all.img is 7.055026252478361E+03 seconds
-> ad57018000g300170_all.img has 3307 counts
-> Exposure for ad57018000g300270_all.img is 4.379974911391735E+03 seconds
-> ad57018000g300270_all.img has 2154 counts
-> Exposure for ad57018000g300370_all.img is 6.389525595307350E+01 seconds
-> ad57018000g300370_all.img has 30 counts
-> Summing the following images to produce ad57018000gis25670_all.totsky

ad57018000g200170_all.img
ad57018000g200270_all.img
ad57018000g200370_all.img
ad57018000g300170_all.img
ad57018000g300270_all.img
ad57018000g300370_all.img

-> Setting EXPOSURE=22933.7931090594 in ad57018000gis25670_all.totsky
-> Setting TOTCTS=10523 in ad57018000gis25670_all.totsky
-> Exposure for ad57018000g200170_lo.img is 6.991026521891356E+03 seconds
-> ad57018000g200170_lo.img has 1499 counts
-> Exposure for ad57018000g200270_lo.img is 4.379974911391735E+03 seconds
-> ad57018000g200270_lo.img has 955 counts
-> Exposure for ad57018000g200370_lo.img is 6.389525595307350E+01 seconds
-> ad57018000g200370_lo.img has 9 counts
-> Exposure for ad57018000g300170_lo.img is 7.055026252478361E+03 seconds
-> ad57018000g300170_lo.img has 1694 counts
-> Exposure for ad57018000g300270_lo.img is 4.379974911391735E+03 seconds
-> ad57018000g300270_lo.img has 1119 counts
-> Exposure for ad57018000g300370_lo.img is 6.389525595307350E+01 seconds
-> ad57018000g300370_lo.img has 14 counts
-> Summing the following images to produce ad57018000gis25670_lo.totsky

ad57018000g200170_lo.img
ad57018000g200270_lo.img
ad57018000g200370_lo.img
ad57018000g300170_lo.img
ad57018000g300270_lo.img
ad57018000g300370_lo.img

-> Setting EXPOSURE=22933.7931090594 in ad57018000gis25670_lo.totsky
-> Setting TOTCTS=5290 in ad57018000gis25670_lo.totsky
-> Exposure for ad57018000g200170_hi.img is 6.991026521891356E+03 seconds
-> ad57018000g200170_hi.img has 1543 counts
-> Exposure for ad57018000g200270_hi.img is 4.379974911391735E+03 seconds
-> ad57018000g200270_hi.img has 1020 counts
-> Exposure for ad57018000g200370_hi.img is 6.389525595307350E+01 seconds
-> ad57018000g200370_hi.img has 17 counts
-> Exposure for ad57018000g300170_hi.img is 7.055026252478361E+03 seconds
-> ad57018000g300170_hi.img has 1622 counts
-> Exposure for ad57018000g300270_hi.img is 4.379974911391735E+03 seconds
-> ad57018000g300270_hi.img has 1044 counts
-> Exposure for ad57018000g300370_hi.img is 6.389525595307350E+01 seconds
-> ad57018000g300370_hi.img has 16 counts
-> Summing the following images to produce ad57018000gis25670_hi.totsky

ad57018000g200170_hi.img
ad57018000g200270_hi.img
ad57018000g200370_hi.img
ad57018000g300170_hi.img
ad57018000g300270_hi.img
ad57018000g300370_hi.img

-> Setting EXPOSURE=22933.7931090594 in ad57018000gis25670_hi.totsky
-> Setting TOTCTS=5262 in ad57018000gis25670_hi.totsky
-> Running XIMAGE to create ad57018000gis25670.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad57018000gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 5.0000000
 Saving current map
![2]XIMAGE> read/expo ad57018000gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 382.22989
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :    10.00000
  Min and max :   0  18
 Max-preserving scaling factor :     2.7777778
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     46327.8
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (7:4:17)

-> Smoothing ad57018000gis25670_all.totsky with ad57018000gis25670.totexpo
-> Clipping exposures below 3440.0690895 seconds
-> Detecting sources in ad57018000gis25670_all.smooth
-> Standard Output From STOOL ascasource:

203 130 6.89056e-05 164 53 5.90521

-> Smoothing ad57018000gis25670_hi.totsky with ad57018000gis25670.totexpo
-> Clipping exposures below 3440.0690895 seconds
-> Detecting sources in ad57018000gis25670_hi.smooth
-> Standard Output From STOOL ascasource:

204 135 3.51875e-05 51 52 5.83118
144 83 2.96075e-05 18 9 4.14748

-> Smoothing ad57018000gis25670_lo.totsky with ad57018000gis25670.totexpo
-> Clipping exposures below 3440.0690895 seconds
-> Detecting sources in ad57018000gis25670_lo.smooth
-> Standard Output From STOOL ascasource:

199 129 3.41048e-05 160 59 6.61516

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

203 130 53 T
144 83 18 F

-> Sources with radius >= 2

203 130 53 T
144 83 18 F

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad57018000gis25670.src
-> Smoothing ad57018000sis32002_all.totsky with ad57018000sis32002.totexpo
-> Clipping exposures below 3109.75228275 seconds
-> Detecting sources in ad57018000sis32002_all.smooth
-> Smoothing ad57018000sis32002_hi.totsky with ad57018000sis32002.totexpo
-> Clipping exposures below 3109.75228275 seconds
-> Detecting sources in ad57018000sis32002_hi.smooth
-> Smoothing ad57018000sis32002_lo.totsky with ad57018000sis32002.totexpo
-> Clipping exposures below 3109.75228275 seconds
-> Detecting sources in ad57018000sis32002_lo.smooth
-> Determining extraction radii
-> Eliminating redundant sources
-> Sources with radius >= 2

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad57018000sis32002.src
-> Generating region files
-> Converting (203.0,130.0,2.0) to g2 detector coordinates
-> Using events in: ad57018000g200170m.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   734.00000
 The mean of the selected column is                  122.33333
 The standard deviation of the selected column is    1.0327956
 The minimum of selected column is                   121.00000
 The maximum of selected column is                   124.00000
 The number of points used in calculation is                6

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   320.00000
 The mean of the selected column is                  53.333333
 The standard deviation of the selected column is    1.2110601
 The minimum of selected column is                   52.000000
 The maximum of selected column is                   55.000000
 The number of points used in calculation is                6

-> Converting (144.0,83.0,2.0) to g2 detector coordinates
-> Using events in: ad57018000g200170m.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   308.00000
 The mean of the selected column is                  77.000000
 The standard deviation of the selected column is   0.81649658
 The minimum of selected column is                   76.000000
 The maximum of selected column is                   78.000000
 The number of points used in calculation is                4

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   453.00000
 The mean of the selected column is                  113.25000
 The standard deviation of the selected column is    1.7078251
 The minimum of selected column is                   111.00000
 The maximum of selected column is                   115.00000
 The number of points used in calculation is                4

-> Converting (203.0,130.0,2.0) to g3 detector coordinates
-> Using events in: ad57018000g300170m.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   385.00000
 The mean of the selected column is                  128.33333
 The standard deviation of the selected column is    2.3094011
 The minimum of selected column is                   127.00000
 The maximum of selected column is                   131.00000
 The number of points used in calculation is                3

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   161.00000
 The mean of the selected column is                  53.666667
 The standard deviation of the selected column is   0.57735027
 The minimum of selected column is                   53.000000
 The maximum of selected column is                   54.000000
 The number of points used in calculation is                3

-> Converting (144.0,83.0,2.0) to g3 detector coordinates
-> Using events in: ad57018000g300170m.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1159.0000
 The mean of the selected column is                  82.785714
 The standard deviation of the selected column is   0.80178373
 The minimum of selected column is                   81.000000
 The maximum of selected column is                   84.000000
 The number of points used in calculation is               14

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1591.0000
 The mean of the selected column is                  113.64286
 The standard deviation of the selected column is    1.3926810
 The minimum of selected column is                   112.00000
 The maximum of selected column is                   116.00000
 The number of points used in calculation is               14

Extracting spectra and generating response matrices (7:10:43)

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:

1 ad57018000s000102h.evt 1771
1 ad57018000s000202m.evt 1771

-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Fetching SIS0_OFFCHIP.2
-> Extracting ad57018000s010102_0.pi from ad57018000s032002_0.reg and:

ad57018000s000102h.evt
ad57018000s000202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      739 1100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      739 1100
      2 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.64E+04     1032 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            739       722             17         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1032      1003             29         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1771      1725             46         0         0         0
   in  10442.     seconds
 Spectrum         has     1725 counts for 0.1652     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10442.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20923         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s010102_0.pi
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            739       722             17         0         0         0
 Writing events file
    722 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1032      1003             29         0         0         0
 Writing events file
   1725 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1771      1725             46         0         0         0
   in  10442.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad57018000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad57018000s010102_0.pi group=yes
Wrote spectrum to ad57018000s010102_0.pi
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad57018000s010102_0.pi
-> Grouping ad57018000s010102_0.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10442.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20923         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      18  are grouped by a factor        2
 ...        19 -      24  are grouped by a factor        3
 ...        25 -      50  are grouped by a factor        2
 ...        51 -      62  are grouped by a factor        3
 ...        63 -      70  are grouped by a factor        4
 ...        71 -      76  are grouped by a factor        6
 ...        77 -      94  are grouped by a factor        9
 ...        95 -     118  are grouped by a factor       12
 ...       119 -     133  are grouped by a factor       15
 ...       134 -     152  are grouped by a factor       19
 ...       153 -     180  are grouped by a factor       28
 ...       181 -     216  are grouped by a factor       36
 ...       217 -     272  are grouped by a factor       56
 ...       273 -     403  are grouped by a factor      131
 ...       404 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s010102_0.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 0 1
-> Fetching SIS0_NOTCHIP1.1
-> Extracting spectrum from chip 0
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.10E+05     1725 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1725       695           1030         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1725       695           1030         0         0         0
   in  10442.     seconds
 Spectrum         has      695 counts for 6.6560E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10442.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10461         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec0.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum spec0.tmp group=yes
Wrote spectrum to spec0.tmp
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Fetching sis0c0p40_290296.fits
-> Generating RMF for chip 0
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C0 Bright PI RMF
Calibration data files:
  ecd = ./sis0c0p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Fetching SIS0_NOTCHIP0.1
-> Extracting spectrum from chip 1
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.10E+05     1725 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1725      1030            695         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1725      1030            695         0         0         0
   in  10442.     seconds
 Spectrum         has     1030 counts for 9.8643E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10442.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec1.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum spec1.tmp group=yes
Wrote spectrum to spec1.tmp
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Fetching sis0c1p40_290296.fits
-> Generating RMF for chip 1
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Chip weights:

rmf0.tmp 0.402898550724638
rmf1.tmp 0.597101449275362

-> Standard Output From FTOOL addrmf:

ADDRMF vers 1.14  11 February 1999.
Summing ...
 4.029E-01 * rmf0.tmp
 5.971E-01 * rmf1.tmp
 RMF #    1 : rmf0.tmp                   0.40
              ASCA       SIS0       NONE       NONE       PI
 RMF #    2 : rmf1.tmp                   0.60
              ASCA       SIS0       NONE       NONE       PI
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ...  using wtrmf4 1.4.0
 ...... wtrmf4 Old format requested: 1.2.0
 ...... Resetting format (HDUVERS) to 1.3.0
 ... new extension created
 ...  Max # elements in F_CHAN & N_CHAN arrays =        2
 ...  Max # elements in MATRIX array =      432
 ... Using Variable length array for MATRIX column
 ... written the extension header keywords
 ... written the OGIP required keywords
 ... written the history keywords
 ... written the comment keywords
 ... defined the data structure
 ... successfully written RSP_MATRIX data

-> Generating ad57018000s010102_0.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   53 by  108 bins
               expanded to   53 by  108 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   241.09     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.71800E+03
 Weighted mean angle from optical axis  =  8.608 arcmin

-> Standard Output From STOOL group_event_files:

1 ad57018000s000112h.evt 777

-> SIS0_NOTCHIP2.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> SIS0_OFFCHIP.2 already present in current directory
-> Extracting ad57018000s010212_0.pi from ad57018000s032002_0.reg and:

ad57018000s000112h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      777 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            777       761             16         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           777       761             16         0         0         0
   in  4022.1     seconds
 Spectrum         has      761 counts for 0.1892     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4022.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20923         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s010212_0.pi
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            777       761             16         0         0         0
 Writing events file
    761 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           777       761             16         0         0         0
   in  4022.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad57018000s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad57018000s010212_0.pi group=yes
Wrote spectrum to ad57018000s010212_0.pi
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting BLANK keyword from ad57018000s010212_0.pi
-> Grouping ad57018000s010212_0.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4022.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20923         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      31  of undefined grouping (Channel quality=bad)
 ...        32 -      36  are grouped by a factor        5
 ...        37 -      47  are grouped by a factor       11
 ...        48 -      54  are grouped by a factor        7
 ...        55 -      62  are grouped by a factor        8
 ...        63 -      69  are grouped by a factor        7
 ...        70 -      85  are grouped by a factor        8
 ...        86 -      91  are grouped by a factor        6
 ...        92 -      98  are grouped by a factor        7
 ...        99 -     111  are grouped by a factor       13
 ...       112 -     129  are grouped by a factor       18
 ...       130 -     152  are grouped by a factor       23
 ...       153 -     203  are grouped by a factor       51
 ...       204 -     273  are grouped by a factor       70
 ...       274 -     387  are grouped by a factor      114
 ...       388 -     594  are grouped by a factor      207
 ...       595 -    1017  are grouped by a factor      423
 ...      1018 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s010212_0.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 0 1
-> SIS0_NOTCHIP1.1 already present in current directory
-> Extracting spectrum from chip 0
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      761 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
            761       321            440         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           761       321            440         0         0         0
   in  4022.1     seconds
 Spectrum         has      321 counts for 7.9808E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4022.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10461         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec0.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad57018000s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec0.tmp group=yes
Wrote spectrum to spec0.tmp
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> sis0c0p40_290296.fits already present in current directory
-> Generating RMF for chip 0
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C0 Bright2 PI RMF
Calibration data files:
  ecd = ./sis0c0p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> SIS0_NOTCHIP0.1 already present in current directory
-> Extracting spectrum from chip 1
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      761 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
            761       440            321         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           761       440            321         0         0         0
   in  4022.1     seconds
 Spectrum         has      440 counts for 0.1094     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4022.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec1.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad57018000s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec1.tmp group=yes
Wrote spectrum to spec1.tmp
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> sis0c1p40_290296.fits already present in current directory
-> Generating RMF for chip 1
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C1 Bright2 PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Chip weights:

rmf0.tmp 0.421813403416557
rmf1.tmp 0.578186596583443

-> Standard Output From FTOOL addrmf:

ADDRMF vers 1.14  11 February 1999.
Summing ...
 4.218E-01 * rmf0.tmp
 5.782E-01 * rmf1.tmp
 RMF #    1 : rmf0.tmp                   0.42
              ASCA       SIS0       NONE       NONE       PI
 RMF #    2 : rmf1.tmp                   0.58
              ASCA       SIS0       NONE       NONE       PI
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ...  using wtrmf4 1.4.0
 ...... wtrmf4 Old format requested: 1.2.0
 ...... Resetting format (HDUVERS) to 1.3.0
 ... new extension created
 ...  Max # elements in F_CHAN & N_CHAN arrays =        2
 ...  Max # elements in MATRIX array =      846
 ... Using Variable length array for MATRIX column
 ... written the extension header keywords
 ... written the OGIP required keywords
 ... written the history keywords
 ... written the comment keywords
 ... defined the data structure
 ... successfully written RSP_MATRIX data

-> Generating ad57018000s010212_0.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   53 by  108 bins
               expanded to   53 by  108 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   241.09     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 7.59000E+02
 Weighted mean angle from optical axis  =  8.563 arcmin

-> Standard Output From STOOL group_event_files:

1 ad57018000s100102h.evt 1597
1 ad57018000s100202m.evt 1597

-> Fetching SIS1_NOTCHIP0.1
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_OFFCHIP.2
-> Extracting ad57018000s110102_0.pi from ad57018000s132002_0.reg and:

ad57018000s100102h.evt
ad57018000s100202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      683 0011
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      683 0011
      2 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.63E+04      914 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            683       666             17         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            914       891             23         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1597      1557             40         0         0         0
   in  10290.     seconds
 Spectrum         has     1557 counts for 0.1513     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10290.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20924         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s110102_0.pi
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            683       666             17         0         0         0
 Writing events file
    666 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            914       891             23         0         0         0
 Writing events file
   1557 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1597      1557             40         0         0         0
   in  10290.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad57018000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad57018000s110102_0.pi group=yes
Wrote spectrum to ad57018000s110102_0.pi
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad57018000s110102_0.pi
-> Grouping ad57018000s110102_0.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10290.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20924         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      18  are grouped by a factor        2
 ...        19 -      21  are grouped by a factor        3
 ...        22 -      25  are grouped by a factor        4
 ...        26 -      49  are grouped by a factor        2
 ...        50 -      58  are grouped by a factor        3
 ...        59 -      62  are grouped by a factor        4
 ...        63 -      72  are grouped by a factor        5
 ...        73 -      78  are grouped by a factor        6
 ...        79 -      86  are grouped by a factor        8
 ...        87 -      95  are grouped by a factor        9
 ...        96 -     119  are grouped by a factor       12
 ...       120 -     132  are grouped by a factor       13
 ...       133 -     152  are grouped by a factor       20
 ...       153 -     173  are grouped by a factor       21
 ...       174 -     243  are grouped by a factor       35
 ...       244 -     292  are grouped by a factor       49
 ...       293 -     423  are grouped by a factor      131
 ...       424 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s110102_0.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 2 3
-> Fetching SIS1_NOTCHIP3.1
-> Extracting spectrum from chip 2
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.10E+05     1557 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1557       779            778         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1557       779            778         0         0         0
   in  10290.     seconds
 Spectrum         has      779 counts for 7.5705E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10290.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec2.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum spec2.tmp group=yes
Wrote spectrum to spec2.tmp
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Fetching sis1c2p40_290296.fits
-> Generating RMF for chip 2
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C2 Bright PI RMF
Calibration data files:
  ecd = ./sis1c2p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Fetching SIS1_NOTCHIP2.1
-> Extracting spectrum from chip 3
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.10E+05     1557 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1557       778            779         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1557       778            779         0         0         0
   in  10290.     seconds
 Spectrum         has      778 counts for 7.5607E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10290.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec3.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum spec3.tmp group=yes
Wrote spectrum to spec3.tmp
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Fetching sis1c3p40_290296.fits
-> Generating RMF for chip 3
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Chip weights:

rmf2.tmp 0.500321130378934
rmf3.tmp 0.499678869621066

-> Standard Output From FTOOL addrmf:

ADDRMF vers 1.14  11 February 1999.
Summing ...
 5.003E-01 * rmf2.tmp
 4.997E-01 * rmf3.tmp
 RMF #    1 : rmf2.tmp                   0.50
              ASCA       SIS1       NONE       NONE       PI
 RMF #    2 : rmf3.tmp                   0.50
              ASCA       SIS1       NONE       NONE       PI
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ...  using wtrmf4 1.4.0
 ...... wtrmf4 Old format requested: 1.2.0
 ...... Resetting format (HDUVERS) to 1.3.0
 ... new extension created
 ...  Max # elements in F_CHAN & N_CHAN arrays =        2
 ...  Max # elements in MATRIX array =      433
 ... Using Variable length array for MATRIX column
 ... written the extension header keywords
 ... written the OGIP required keywords
 ... written the history keywords
 ... written the comment keywords
 ... defined the data structure
 ... successfully written RSP_MATRIX data

-> Generating ad57018000s110102_0.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   52 by  109 bins
               expanded to   52 by  109 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   241.11     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.54100E+03
 Weighted mean angle from optical axis  =  8.458 arcmin

-> Standard Output From STOOL group_event_files:

1 ad57018000s100112h.evt 732

-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_OFFCHIP.2 already present in current directory
-> Extracting ad57018000s110212_0.pi from ad57018000s132002_0.reg and:

ad57018000s100112h.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      732 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            732       712             20         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           732       712             20         0         0         0
   in  4002.1     seconds
 Spectrum         has      712 counts for 0.1779     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4002.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20924         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s110212_0.pi
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            732       712             20         0         0         0
 Writing events file
    712 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           732       712             20         0         0         0
   in  4002.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad57018000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad57018000s110212_0.pi group=yes
Wrote spectrum to ad57018000s110212_0.pi
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting BLANK keyword from ad57018000s110212_0.pi
-> Grouping ad57018000s110212_0.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4002.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.20924         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      32  of undefined grouping (Channel quality=bad)
 ...        33 -      36  are grouped by a factor        4
 ...        37 -      49  are grouped by a factor       13
 ...        50 -      73  are grouped by a factor        8
 ...        74 -      80  are grouped by a factor        7
 ...        81 -      88  are grouped by a factor        8
 ...        89 -      97  are grouped by a factor        9
 ...        98 -     111  are grouped by a factor       14
 ...       112 -     129  are grouped by a factor       18
 ...       130 -     160  are grouped by a factor       31
 ...       161 -     192  are grouped by a factor       32
 ...       193 -     241  are grouped by a factor       49
 ...       242 -     313  are grouped by a factor       72
 ...       314 -     431  are grouped by a factor      118
 ...       432 -     658  are grouped by a factor      227
 ...       659 -    1023  are grouped by a factor      365
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000s110212_0.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 2 3
-> SIS1_NOTCHIP3.1 already present in current directory
-> Extracting spectrum from chip 2
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      712 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
            712       380            332         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           712       380            332         0         0         0
   in  4002.1     seconds
 Spectrum         has      380 counts for 9.4949E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4002.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec2.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad57018000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP3.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec2.tmp group=yes
Wrote spectrum to spec2.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> sis1c2p40_290296.fits already present in current directory
-> Generating RMF for chip 2
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C2 Bright2 PI RMF
Calibration data files:
  ecd = ./sis1c2p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> SIS1_NOTCHIP2.1 already present in current directory
-> Extracting spectrum from chip 3
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      712 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
            712       332            380         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           712       332            380         0         0         0
   in  4002.1     seconds
 Spectrum         has      332 counts for 8.2956E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 4002.1          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : spec3.tmp
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad57018000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum spec3.tmp group=yes
Wrote spectrum to spec3.tmp
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> sis1c3p40_290296.fits already present in current directory
-> Generating RMF for chip 3
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C3 Bright2 PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Chip weights:

rmf2.tmp 0.533707865168539
rmf3.tmp 0.466292134831461

-> Standard Output From FTOOL addrmf:

ADDRMF vers 1.14  11 February 1999.
Summing ...
 5.337E-01 * rmf2.tmp
 4.663E-01 * rmf3.tmp
 RMF #    1 : rmf2.tmp                   0.53
              ASCA       SIS1       NONE       NONE       PI
 RMF #    2 : rmf3.tmp                   0.47
              ASCA       SIS1       NONE       NONE       PI
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ... using rdrmf4 1.3.2
 WARNING - rdrmf4 1.3.2: Problem reading DETNAM keyword
 ... fitsio 2.035 error message: keyword not found in header
 WARNING - rdrmf4 1.3.2: Problem reading EFFAREA keyword
 ... fitsio 2.035 error message: keyword not found in header
 ... read all the keywords
 ... reading the data
 ... successfully read RSP_MATRIX data
 ...  using wtrmf4 1.4.0
 ...... wtrmf4 Old format requested: 1.2.0
 ...... Resetting format (HDUVERS) to 1.3.0
 ... new extension created
 ...  Max # elements in F_CHAN & N_CHAN arrays =        2
 ...  Max # elements in MATRIX array =      858
 ... Using Variable length array for MATRIX column
 ... written the extension header keywords
 ... written the OGIP required keywords
 ... written the history keywords
 ... written the comment keywords
 ... defined the data structure
 ... successfully written RSP_MATRIX data

-> Generating ad57018000s110212_0.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   53 by  109 bins
               expanded to   53 by  109 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   241.11     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 7.02000E+02
 Weighted mean angle from optical axis  =  8.332 arcmin

-> Standard Output From STOOL group_event_files:

1 ad57018000g200170m.evt 5102
1 ad57018000g200270h.evt 5102
1 ad57018000g200370l.evt 5102

-> GIS2_REGION256.4 already present in current directory
-> Extracting ad57018000g210170_1.pi from ad57018000g225670_1.reg and:

ad57018000g200170m.evt
ad57018000g200270h.evt
ad57018000g200370l.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       26     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076      1078           1998         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000       660           1340         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26        10             16         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5102      1748           3354         0         0         0
   in  11435.     seconds
 Spectrum         has     1748 counts for 0.1529     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 11435.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 8.04600E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad57018000g210170_1.pi group=yes
Wrote spectrum to ad57018000g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad57018000g210170_1.pi
-> Correcting ad57018000g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad57018000g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10774.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 8.04600E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      26  are grouped by a factor       27
 ...        27 -      41  are grouped by a factor       15
 ...        42 -      61  are grouped by a factor       20
 ...        62 -      73  are grouped by a factor       12
 ...        74 -      80  are grouped by a factor        7
 ...        81 -      86  are grouped by a factor        6
 ...        87 -      93  are grouped by a factor        7
 ...        94 -     101  are grouped by a factor        8
 ...       102 -     113  are grouped by a factor        6
 ...       114 -     118  are grouped by a factor        5
 ...       119 -     130  are grouped by a factor        6
 ...       131 -     135  are grouped by a factor        5
 ...       136 -     141  are grouped by a factor        6
 ...       142 -     146  are grouped by a factor        5
 ...       147 -     149  are grouped by a factor        3
 ...       150 -     156  are grouped by a factor        7
 ...       157 -     162  are grouped by a factor        6
 ...       163 -     169  are grouped by a factor        7
 ...       170 -     177  are grouped by a factor        8
 ...       178 -     183  are grouped by a factor        6
 ...       184 -     191  are grouped by a factor        8
 ...       192 -     201  are grouped by a factor       10
 ...       202 -     209  are grouped by a factor        8
 ...       210 -     220  are grouped by a factor       11
 ...       221 -     233  are grouped by a factor       13
 ...       234 -     249  are grouped by a factor       16
 ...       250 -     262  are grouped by a factor       13
 ...       263 -     278  are grouped by a factor       16
 ...       279 -     291  are grouped by a factor       13
 ...       292 -     310  are grouped by a factor       19
 ...       311 -     330  are grouped by a factor       20
 ...       331 -     382  are grouped by a factor       26
 ...       383 -     406  are grouped by a factor       24
 ...       407 -     436  are grouped by a factor       30
 ...       437 -     482  are grouped by a factor       46
 ...       483 -     550  are grouped by a factor       68
 ...       551 -     649  are grouped by a factor       99
 ...       650 -     763  are grouped by a factor      114
 ...       764 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g210170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad57018000g210170_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size  105 by   66 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   60   10
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   318.01     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.74100E+03
 Weighted mean angle from optical axis  = 16.495 arcmin

-> Extracting ad57018000g210170_2.pi from ad57018000g225670_2.reg and:

ad57018000g200170m.evt
ad57018000g200270h.evt
ad57018000g200370l.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       26     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076       160           2916         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000       107           1893         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26         3             23         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5102       270           4832         0         0         0
   in  11435.     seconds
 Spectrum         has      270 counts for 2.3612E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 11435.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.66780E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g210170_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_2.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad57018000g210170_2.pi group=yes
Wrote spectrum to ad57018000g210170_2.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad57018000g210170_2.pi since it has 270 events
-> Standard Output From STOOL group_event_files:

1 ad57018000g300170m.evt 5568
1 ad57018000g300270h.evt 5568
1 ad57018000g300370l.evt 5568

-> GIS3_REGION256.4 already present in current directory
-> Extracting ad57018000g310170_1.pi from ad57018000g325670_1.reg and:

ad57018000g300170m.evt
ad57018000g300270h.evt
ad57018000g300370l.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       30     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353      1081           2272         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185       723           1462         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30         7             23         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5568      1811           3757         0         0         0
   in  11499.     seconds
 Spectrum         has     1811 counts for 0.1575     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 11499.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 8.25350E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad57018000g310170_1.pi group=yes
Wrote spectrum to ad57018000g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad57018000g310170_1.pi
-> Correcting ad57018000g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad57018000g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 10846.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 8.25350E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      30  are grouped by a factor       31
 ...        31 -      46  are grouped by a factor       16
 ...        47 -      65  are grouped by a factor       19
 ...        66 -      72  are grouped by a factor        7
 ...        73 -      81  are grouped by a factor        9
 ...        82 -      93  are grouped by a factor        6
 ...        94 -     100  are grouped by a factor        7
 ...       101 -     110  are grouped by a factor        5
 ...       111 -     117  are grouped by a factor        7
 ...       118 -     123  are grouped by a factor        6
 ...       124 -     131  are grouped by a factor        4
 ...       132 -     141  are grouped by a factor        5
 ...       142 -     147  are grouped by a factor        6
 ...       148 -     154  are grouped by a factor        7
 ...       155 -     164  are grouped by a factor        5
 ...       165 -     176  are grouped by a factor        6
 ...       177 -     181  are grouped by a factor        5
 ...       182 -     188  are grouped by a factor        7
 ...       189 -     197  are grouped by a factor        9
 ...       198 -     208  are grouped by a factor       11
 ...       209 -     218  are grouped by a factor       10
 ...       219 -     234  are grouped by a factor       16
 ...       235 -     246  are grouped by a factor       12
 ...       247 -     259  are grouped by a factor       13
 ...       260 -     276  are grouped by a factor       17
 ...       277 -     290  are grouped by a factor       14
 ...       291 -     308  are grouped by a factor       18
 ...       309 -     330  are grouped by a factor       22
 ...       331 -     355  are grouped by a factor       25
 ...       356 -     381  are grouped by a factor       26
 ...       382 -     409  are grouped by a factor       28
 ...       410 -     479  are grouped by a factor       35
 ...       480 -     542  are grouped by a factor       63
 ...       543 -     639  are grouped by a factor       97
 ...       640 -     789  are grouped by a factor      150
 ...       790 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g310170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad57018000g310170_1.arf with point=no
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size  106 by   67 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   65   11
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   326.21     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.80500E+03
 Weighted mean angle from optical axis  = 16.671 arcmin

-> Extracting ad57018000g310170_2.pi from ad57018000g325670_2.reg and:

ad57018000g300170m.evt
ad57018000g300270h.evt
ad57018000g300370l.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       30     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353       200           3153         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185       136           2049         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30         3             27         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5568       339           5229         0         0         0
   in  11499.     seconds
 Spectrum         has      339 counts for 2.9481E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 11499.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.66780E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g310170_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_2.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad57018000g310170_2.pi group=yes
Wrote spectrum to ad57018000g310170_2.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad57018000g310170_2.pi since it has 339 events
-> Plotting ad57018000g210170_1_pi.ps from ad57018000g210170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 07:45:25 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad57018000g210170_1.pi;
 Net count rate (cts/s) for file   1  0.1622    +/-  4.1331E-03
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad57018000g210170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad57018000g310170_1_pi.ps from ad57018000g310170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 07:45:41 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad57018000g310170_1.pi;
 Net count rate (cts/s) for file   1  0.1670    +/-  4.1388E-03
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad57018000g310170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad57018000s010102_0_pi.ps from ad57018000s010102_0.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 07:45:57 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad57018000s010102_0.pi;
 Net count rate (cts/s) for file   1  0.1652    +/-  4.0868E-03
   using response (RMF) file...       ad57018000s010102_0.rmf
   using auxiliary (ARF) file...      ad57018000s010102_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad57018000s010212_0_pi.ps from ad57018000s010212_0.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 07:46:14 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad57018000s010212_0.pi;
 Net count rate (cts/s) for file   1  0.1892    +/-  7.0013E-03
   using response (RMF) file...       ad57018000s010212_0.rmf
   using auxiliary (ARF) file...      ad57018000s010212_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad57018000s110102_0_pi.ps from ad57018000s110102_0.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 07:46:33 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad57018000s110102_0.pi;
 Net count rate (cts/s) for file   1  0.1513    +/-  3.9451E-03
   using response (RMF) file...       ad57018000s110102_0.rmf
   using auxiliary (ARF) file...      ad57018000s110102_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad57018000s110212_0_pi.ps from ad57018000s110212_0.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 07:46:50 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad57018000s110212_0.pi;
 Net count rate (cts/s) for file   1  0.1779    +/-  6.8154E-03
   using response (RMF) file...       ad57018000s110212_0.rmf
   using auxiliary (ARF) file...      ad57018000s110212_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

Extracting light curves (7:46:56)

-> TIMEDEL=8.0000000000E+00 for ad57018000s000102h.evt
-> TIMEDEL=8.0000000000E+00 for ad57018000s000202m.evt
-> Minimum bin size is 8.0000000000E+00 seconds
-> Extracting events from region ad57018000s032002_0.reg
-> ... and files: ad57018000s000102h.evt ad57018000s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      739 1100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      739 1100
      2 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.64E+04     1032 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            739       739              0         0         0         0
 Writing events file
    739 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1032      1032              0         0         0         0
 Writing events file
   1771 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1771      1771              0         0         0         0
   in  10442.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad57018000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting ad57018000s000002_0.lc with binsize 294.796055605828
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.10E+05     1771 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1771      1771              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1771      1771              0         0         0         0
   in  10442.     seconds
 Fits light curve has     1771 counts for 0.1696     counts/sec
 Thresholding removed significant counts
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > set binsize 294.796055605828
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad57018000s000002_0.lc
Wrote FITS light curve to file ad57018000s000002_0.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Plotting ad57018000s000002_0.lc in ad57018000s000002_0_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad57018000s000002_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ W50 EAST RIM        Start Time (d) .... 11269 14:49:12.137
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11270 01:13:44.137
 No. of Rows .......           36        Bin Time (s) ......    294.8
 Right Ascension ... 2.8886E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.9150E+00          Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11269.61750158100  (days)      14:49:12:137  (h:m:s:ms)
 Expected Stop .... 11270.05120528471  (days)       1:13:44:137  (h:m:s:ms)
 
 Minimum Newbin Time    294.79605      (s)
 for Maximum Newbin No..              128
 
 Default Newbin Time is:   294.79605    (s) (to have 1 Intv. of     128 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     294.79605      (s)
 Maximum Newbin No.               128
 
 Default Newbins per Interval are:       128
 (giving       1 Interval of       128 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       128 Newbins of       294.796     (s)
 
     128 analysis results per interval
 
  2% completed
  5% completed
  8% completed
 11% completed
 13% completed
 16% completed
 19% completed
 22% completed
 25% completed
 27% completed
 30% completed
 33% completed
 36% completed
 38% completed
 41% completed
 44% completed
 47% completed
 50% completed
 52% completed
 55% completed
 58% completed
 61% completed
 63% completed
 66% completed
 69% completed
 72% completed
 75% completed
 77% completed
 80% completed
 83% completed
 86% completed
 88% completed
 91% completed
 94% completed
 97% completed
100% completed
 
 Intv    1   Start 11269 14:51:39
     Ser.1     Avg 0.1606        Chisq  48.41       Var 0.7755E-03 Newbs.     36
               Min 0.1052          Max 0.2714    expVar 0.6512E-03  Bins     36
PLT> @lightcurve.pco
!PLT> dev ad57018000s000002_0_lc.ps/ps
!PLT> LA File ad57018000s000002_0.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=8.0000000000E+00 for ad57018000s100102h.evt
-> TIMEDEL=8.0000000000E+00 for ad57018000s100202m.evt
-> Minimum bin size is 8.0000000000E+00 seconds
-> Extracting events from region ad57018000s132002_0.reg
-> ... and files: ad57018000s100102h.evt ad57018000s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      683 0011
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      683 0011
      2 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.63E+04      914 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            683       683              0         0         0         0
 Writing events file
    683 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            914       914              0         0         0         0
 Writing events file
   1597 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1597      1597              0         0         0         0
   in  10290.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad57018000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting ad57018000s100002_0.lc with binsize 322.16672670789
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.10E+05     1597 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1597      1597              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1597      1597              0         0         0         0
   in  10290.     seconds
 Fits light curve has     1597 counts for 0.1552     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > set binsize 322.16672670789
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad57018000s100002_0.lc
Wrote FITS light curve to file ad57018000s100002_0.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Plotting ad57018000s100002_0.lc in ad57018000s100002_0_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad57018000s100002_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ W50 EAST RIM        Start Time (d) .... 11269 14:49:12.137
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11270 01:13:44.137
 No. of Rows .......           31        Bin Time (s) ......    322.2
 Right Ascension ... 2.8886E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.9150E+00          Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11269.61750158100  (days)      14:49:12:137  (h:m:s:ms)
 Expected Stop .... 11270.05120528471  (days)       1:13:44:137  (h:m:s:ms)
 
 Minimum Newbin Time    322.16672      (s)
 for Maximum Newbin No..              117
 
 Default Newbin Time is:   322.16672    (s) (to have 1 Intv. of     117 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     322.16672      (s)
 Maximum Newbin No.               117
 
 Default Newbins per Interval are:       117
 (giving       1 Interval of       117 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       117 Newbins of       322.167     (s)
 
     117 analysis results per interval
 
  3% completed
  6% completed
  9% completed
 12% completed
 16% completed
 19% completed
 22% completed
 25% completed
 29% completed
 32% completed
 35% completed
 38% completed
 41% completed
 45% completed
 48% completed
 51% completed
 54% completed
 58% completed
 61% completed
 64% completed
 67% completed
 70% completed
 74% completed
 77% completed
 80% completed
 83% completed
 87% completed
 90% completed
 93% completed
 96% completed
100% completed
 
 Intv    1   Start 11269 15:24: 6
     Ser.1     Avg 0.1569        Chisq  46.27       Var 0.8563E-03 Newbs.     31
               Min 0.1086          Max 0.2579    expVar 0.5518E-03  Bins     31
PLT> @lightcurve.pco
!PLT> dev ad57018000s100002_0_lc.ps/ps
!PLT> LA File ad57018000s100002_0.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=5.0000000000E-01 for ad57018000g200170m.evt
-> TIMEDEL=6.2500000000E-02 for ad57018000g200270h.evt
-> TIMEDEL=2.0000000000E+00 for ad57018000g200370l.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad57018000g225670_1.reg
-> ... and files: ad57018000g200170m.evt ad57018000g200270h.evt ad57018000g200370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       26     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076      1078           1998         0         0         0
 Writing events file
   1078 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000       660           1340         0         0         0
 Writing events file
   1738 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26        10             16         0         0         0
 Writing events file
   1748 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5102      1748           3354         0         0         0
   in  11435.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad57018000g200070_1.lc with binsize 327.085130203097
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.11E+05     1748     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1748      1748              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1748      1748              0         0         0         0
   in  11435.     seconds
 Fits light curve has     1748 counts for 0.1529     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set binsize 327.085130203097
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad57018000g200070_1.lc
Wrote FITS light curve to file ad57018000g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Plotting ad57018000g200070_1.lc in ad57018000g200070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad57018000g200070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ W50 EAST RIM        Start Time (d) .... 11269 14:47:36.137
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11270 01:19:04.137
 No. of Rows .......           35        Bin Time (s) ......    327.1
 Right Ascension ... 2.8886E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.9150E+00          Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11269.61639046989  (days)      14:47:36:137  (h:m:s:ms)
 Expected Stop .... 11270.05490898841  (days)       1:19: 4:137  (h:m:s:ms)
 
 Minimum Newbin Time    327.08514      (s)
 for Maximum Newbin No..              116
 
 Default Newbin Time is:   327.08514    (s) (to have 1 Intv. of     116 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     327.08514      (s)
 Maximum Newbin No.               116
 
 Default Newbins per Interval are:       116
 (giving       1 Interval of       116 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       116 Newbins of       327.085     (s)
 
     116 analysis results per interval
 
  2% completed
  5% completed
  8% completed
 11% completed
 14% completed
 17% completed
 20% completed
 22% completed
 25% completed
 28% completed
 31% completed
 34% completed
 37% completed
 40% completed
 42% completed
 45% completed
 48% completed
 51% completed
 54% completed
 57% completed
 60% completed
 62% completed
 65% completed
 68% completed
 71% completed
 74% completed
 77% completed
 80% completed
 82% completed
 85% completed
 88% completed
 91% completed
 94% completed
 97% completed
100% completed
 
 Intv    1   Start 11269 14:50:19
     Ser.1     Avg 0.1526        Chisq  38.88       Var 0.6756E-03 Newbs.     35
               Min 0.1090          Max 0.2091    expVar 0.5478E-03  Bins     35
PLT> @lightcurve.pco
!PLT> dev ad57018000g200070_1_lc.ps/ps
!PLT> LA File ad57018000g200070_1.lc
!PLT> plot
!PLT> quit

-> Extracting events from region ad57018000g225670_2.reg
-> ... and files: ad57018000g200170m.evt ad57018000g200270h.evt ad57018000g200370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       26     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076       160           2916         0         0         0
 Writing events file
    160 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000       107           1893         0         0         0
 Writing events file
    267 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26         3             23         0         0         0
 Writing events file
    270 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5102       270           4832         0         0         0
   in  11435.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> skipping ad57018000g200070_2.lc since it would have 270 events
-> TIMEDEL=5.0000000000E-01 for ad57018000g300170m.evt
-> TIMEDEL=6.2500000000E-02 for ad57018000g300270h.evt
-> TIMEDEL=2.0000000000E+00 for ad57018000g300370l.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad57018000g325670_1.reg
-> ... and files: ad57018000g300170m.evt ad57018000g300270h.evt ad57018000g300370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       30     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353      1081           2272         0         0         0
 Writing events file
   1081 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185       723           1462         0         0         0
 Writing events file
   1804 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30         7             23         0         0         0
 Writing events file
   1811 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5568      1811           3757         0         0         0
   in  11499.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad57018000g300070_1.lc with binsize 317.473657716381
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.11E+05     1811     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1811      1811              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1811      1811              0         0         0         0
   in  11499.     seconds
 Fits light curve has     1811 counts for 0.1575     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set binsize 317.473657716381
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad57018000g300070_1.lc
Wrote FITS light curve to file ad57018000g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Plotting ad57018000g300070_1.lc in ad57018000g300070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad57018000g300070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ W50 EAST RIM        Start Time (d) .... 11269 14:47:36.137
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11270 01:19:04.137
 No. of Rows .......           38        Bin Time (s) ......    317.5
 Right Ascension ... 2.8886E+02          Internal time sys.. Converted to TJD
 Declination ....... 4.9150E+00          Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11269.61639046989  (days)      14:47:36:137  (h:m:s:ms)
 Expected Stop .... 11270.05490898841  (days)       1:19: 4:137  (h:m:s:ms)
 
 Minimum Newbin Time    317.47366      (s)
 for Maximum Newbin No..              120
 
 Default Newbin Time is:   317.47366    (s) (to have 1 Intv. of     120 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     317.47366      (s)
 Maximum Newbin No.               120
 
 Default Newbins per Interval are:       120
 (giving       1 Interval of       120 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       120 Newbins of       317.474     (s)
 
     120 analysis results per interval
 
  2% completed
  5% completed
  7% completed
 10% completed
 13% completed
 15% completed
 18% completed
 21% completed
 23% completed
 26% completed
 28% completed
 31% completed
 34% completed
 36% completed
 39% completed
 42% completed
 44% completed
 47% completed
 50% completed
 52% completed
 55% completed
 57% completed
 60% completed
 63% completed
 65% completed
 68% completed
 71% completed
 73% completed
 76% completed
 78% completed
 81% completed
 84% completed
 86% completed
 89% completed
 92% completed
 94% completed
 97% completed
100% completed
 
 Intv    1   Start 11269 14:50:14
     Ser.1     Avg 0.1549        Chisq  31.86       Var 0.4420E-03 Newbs.     38
               Min 0.1184          Max 0.1921    expVar 0.5596E-03  Bins     38
PLT> @lightcurve.pco
!PLT> dev ad57018000g300070_1_lc.ps/ps
!PLT> LA File ad57018000g300070_1.lc
!PLT> plot
!PLT> quit

-> Extracting events from region ad57018000g325670_2.reg
-> ... and files: ad57018000g300170m.evt ad57018000g300270h.evt ad57018000g300370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       30     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353       200           3153         0         0         0
 Writing events file
    200 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185       136           2049         0         0         0
 Writing events file
    336 events written to the output file
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30         3             27         0         0         0
 Writing events file
    339 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5568       339           5229         0         0         0
   in  11499.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300270h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> skipping ad57018000g300070_2.lc since it would have 339 events
-> Merging GTIs from the following files:

ad57018000g200170m.evt[2]
ad57018000g200270h.evt[2]
ad57018000g200370l.evt[2]

-> Making L1 light curve of ft990401_1421_0120G2HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   9018 output records from    9054  good input G2_L1    records.

-> Making L1 light curve of ft990401_1421_0120G2HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  10014 output records from   15179  good input G2_L1    records.

-> Merging GTIs from the following files:

ad57018000g300170m.evt[2]
ad57018000g300270h.evt[2]
ad57018000g300370l.evt[2]

-> Making L1 light curve of ft990401_1421_0120G3HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   8526 output records from    8562  good input G3_L1    records.

-> Making L1 light curve of ft990401_1421_0120G3HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:   9871 output records from   14638  good input G3_L1    records.

Extracting source event files (7:53:31)

-> Extracting unbinned light curve ad57018000g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076      1078           1998         0         0         0
 Writing events file
   1078 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3076      1078           1998         0         0         0
   in  6991.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad57018000g200170.ulc use_events=yes
Wrote events list to file ad57018000g200170.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.70E+04     3076     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3076       160           2916         0         0         0
 Writing events file
    160 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3076       160           2916         0         0         0
   in  6991.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad57018000g200170.ulc use_events=yes
Wrote events list to file ad57018000g200170.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000       660           1340         0         0         0
 Writing events file
    660 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2000       660           1340         0         0         0
   in  4380.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad57018000g200270.ulc use_events=yes
Wrote events list to file ad57018000g200270.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2000     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2000       107           1893         0         0         0
 Writing events file
    107 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2000       107           1893         0         0         0
   in  4380.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad57018000g200270.ulc use_events=yes
Wrote events list to file ad57018000g200270.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g200370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       26     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26        10             16         0         0         0
 Writing events file
     10 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            26        10             16         0         0         0
   in  63.895     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad57018000g200370.ulc use_events=yes
Wrote events list to file ad57018000g200370.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g200370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       26     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             26         3             23         0         0         0
 Writing events file
      3 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            26         3             23         0         0         0
   in  63.895     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad57018000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad57018000g200370.ulc use_events=yes
Wrote events list to file ad57018000g200370.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad57018000g200370.ulc since it has 3 events
-> Extracting unbinned light curve ad57018000g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353      1081           2272         0         0         0
 Writing events file
   1081 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3353      1081           2272         0         0         0
   in  7055.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad57018000g300170.ulc use_events=yes
Wrote events list to file ad57018000g300170.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.71E+04     3353     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           3353       200           3153         0         0         0
 Writing events file
    200 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3353       200           3153         0         0         0
   in  7055.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300170m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad57018000g300170.ulc use_events=yes
Wrote events list to file ad57018000g300170.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185       723           1462         0         0         0
 Writing events file
    723 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2185       723           1462         0         0         0
   in  4380.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad57018000g300270.ulc use_events=yes
Wrote events list to file ad57018000g300270.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.44E+04     2185     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2185       136           2049         0         0         0
 Writing events file
    136 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2185       136           2049         0         0         0
   in  4380.0     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300270h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad57018000g300270.ulc use_events=yes
Wrote events list to file ad57018000g300270.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad57018000g300370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       30     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30         7             23         0         0         0
 Writing events file
      7 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            30         7             23         0         0         0
   in  63.895     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad57018000g300370.ulc use_events=yes
Wrote events list to file ad57018000g300370.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad57018000g300370.ulc since it has 7 events
-> Extracting unbinned light curve ad57018000g300370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.64E+02       30     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             30         3             27         0         0         0
 Writing events file
      3 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            30         3             27         0         0         0
   in  63.895     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad57018000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad57018000g300370.ulc use_events=yes
Wrote events list to file ad57018000g300370.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad57018000g300370.ulc since it has 3 events
-> Extracting unbinned light curve ad57018000s000102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      739 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            739       739              0         0         0         0
 Writing events file
    739 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           739       739              0         0         0         0
   in  4022.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad57018000s000102.ulc use_events=yes
Wrote events list to file ad57018000s000102.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad57018000s000112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      777 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            777       777              0         0         0         0
 Writing events file
    777 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           777       777              0         0         0         0
   in  4022.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad57018000s000112.ulc use_events=yes
Wrote events list to file ad57018000s000112.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad57018000s000202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.64E+04     1032 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1032      1032              0         0         0         0
 Writing events file
   1032 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1032      1032              0         0         0         0
   in  6419.5     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad57018000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad57018000s000202.ulc use_events=yes
Wrote events list to file ad57018000s000202.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad57018000s100102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.40E+04      683 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            683       683              0         0         0         0
 Writing events file
    683 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           683       683              0         0         0         0
   in  4002.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad57018000s100102.ulc use_events=yes
Wrote events list to file ad57018000s100102.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad57018000s100112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.40E+04      732 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            732       732              0         0         0         0
 Writing events file
    732 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           732       732              0         0         0         0
   in  4002.1     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad57018000s100112.ulc use_events=yes
Wrote events list to file ad57018000s100112.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad57018000s100202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.63E+04      914 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            914       914              0         0         0         0
 Writing events file
    914 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           914       914              0         0         0         0
   in  6287.9     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad57018000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad57018000s100202.ulc use_events=yes
Wrote events list to file ad57018000s100202.ulc
Changing Data directory from:
    /data/data13/seq_proc/ad0_57018000.004/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

Extracting FRAME mode data (7:59:26)

-> Extracting FRAME mode data from ft990401_1421.0120
-> stdout output from tlmFrm

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 5294
frame data: 197159492.039136 ---> 197159636.038666 
     S0, C0, 2 ccd mode;  Output File = fr990401_1421.0120_s0c0m2a.fits
frame data: 197159656.038601 ---> 197159800.038131 
     S0, C1, 2 ccd mode;  Output File = fr990401_1421.0120_s0c1m2a.fits
frame data: 197159820.038066 ---> 197159964.037597 
     S0, C0, 2 ccd mode;  Output File = fr990401_1421.0120_s0c0m2b.fits
frame data: 197159984.037531 ---> 197160128.037062 
     S0, C1, 2 ccd mode;  Output File = fr990401_1421.0120_s0c1m2b.fits
frame data: 197165512.01909 ---> 197165656.01862 
     S1, C2, 2 ccd mode;  Output File = fr990401_1421.0120_s1c2m2a.fits
frame data: 197165676.018555 ---> 197165820.018086 
     S1, C3, 2 ccd mode;  Output File = fr990401_1421.0120_s1c3m2a.fits
frame data: 197165840.01802 ---> 197165984.017549 
     S1, C2, 2 ccd mode;  Output File = fr990401_1421.0120_s1c2m2b.fits
frame data: 197166004.017483 ---> 197166148.01701 
     S1, C3, 2 ccd mode;  Output File = fr990401_1421.0120_s1c3m2b.fits

Total of 8 sets of frame data are extracted.

-> Processing frame fr990401_1421.0120_s0c0m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s0c0m2a.fits
Output zero level image : leveled_frame.tmp
Bias level = 342

-> Adding keywords to fr990401_1421.0120_s0c0m2a.fits
-> Processing frame fr990401_1421.0120_s0c0m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s0c0m2b.fits
Output zero level image : leveled_frame.tmp
Bias level = 341

-> Adding keywords to fr990401_1421.0120_s0c0m2b.fits
-> Processing frame fr990401_1421.0120_s0c1m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s0c1m2a.fits
Output zero level image : leveled_frame.tmp
Warning: some pixels in the image have bad value
Bias level = 303

-> Adding keywords to fr990401_1421.0120_s0c1m2a.fits
-> Processing frame fr990401_1421.0120_s0c1m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s0c1m2b.fits
Output zero level image : leveled_frame.tmp
Bias level = 303

-> Adding keywords to fr990401_1421.0120_s0c1m2b.fits
-> Processing frame fr990401_1421.0120_s1c2m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s1c2m2a.fits
Output zero level image : leveled_frame.tmp
Bias level = 187

-> Adding keywords to fr990401_1421.0120_s1c2m2a.fits
-> Processing frame fr990401_1421.0120_s1c2m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s1c2m2b.fits
Output zero level image : leveled_frame.tmp
Warning: some pixels in the image have bad value
Bias level = 187

-> Adding keywords to fr990401_1421.0120_s1c2m2b.fits
-> Processing frame fr990401_1421.0120_s1c3m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s1c3m2a.fits
Output zero level image : leveled_frame.tmp
Bias level = 222

-> Adding keywords to fr990401_1421.0120_s1c3m2a.fits
-> Processing frame fr990401_1421.0120_s1c3m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr990401_1421.0120_s1c3m2b.fits
Output zero level image : leveled_frame.tmp
Bias level = 222

-> Adding keywords to fr990401_1421.0120_s1c3m2b.fits
-> Extracting corner pixel histograms
-> Extracting corner pixels from ad57018000s000101h.unf
-> Calculating corner pixel GTI from ft990401_1421_0120.mkf
-> Extracting corner pixels from ad57018000s100101h.unf

Extracting GIS calibration source spectra (8:1:28)

-> Standard Output From STOOL group_event_files:

1 ad57018000g200170m.unf 22784
1 ad57018000g200270h.unf 22784
1 ad57018000g200370l.unf 22784

-> Fetching GIS2_CALSRC256.2
-> Extracting ad57018000g220170.cal from ad57018000g200170m.unf ad57018000g200270h.unf ad57018000g200370l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.96E+04     9904     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.96E+04     9904     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8462     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.96E+04     9904     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8462     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.56E+04     4418     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9904      1101           8803         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8462       999           7463         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4418       656           3762         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22784      2756          20028         0         0         0
   in  23504.     seconds
 Spectrum         has     2756 counts for 0.1173     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 23504.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200270h.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > read events ad57018000g200370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad57018000g220170.cal group=yes
Wrote spectrum to ad57018000g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad57018000g220170.cal
-> gis2v4_0.rmf already present in current directory
-> Plotting ad57018000g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 08:02:19 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad57018000g220170.cal;
 Net count rate (cts/s) for file   1  0.1173    +/-  2.2413E-03
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     2.9933064E+07 using    84 PHA bins.
 Reduced chi-squared =      393856.1     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     2.9933064E+07 using    84 PHA bins.
 Reduced chi-squared =      388741.1     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     2.9933064E+07 using    84 PHA bins.
 Reduced chi-squared =      383757.2     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      1308.291     using    84 PHA bins.
 Reduced chi-squared =      16.56065     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   312.365     -2         0.      2.9338E-03   6.072          0.
              5.3354E-02  7.7520E-03
   173.031     -3         0.      1.7352E-03   5.971          0.
              5.4990E-02  1.2532E-02
   170.077      0         0.      1.7859E-03   5.971          0.
              5.4936E-02  1.2830E-02
   167.796      0         0.      1.8273E-03   5.972          0.
              5.4879E-02  1.3097E-02
   166.019      0         0.      1.8609E-03   5.973          0.
              5.4821E-02  1.3338E-02
   165.855      1         0.      1.8640E-03   5.973          0.
              5.4814E-02  1.3362E-02
   165.696      1         0.      1.8670E-03   5.973          0.
              5.4808E-02  1.3386E-02
   165.540      1         0.      1.8699E-03   5.973          0.
              5.4801E-02  1.3409E-02
   165.525      2         0.      1.8702E-03   5.973          0.
              5.4800E-02  1.3412E-02
 Number of trials exceeded - last iteration delta =   1.5442E-02
   165.509      2         0.      1.8705E-03   5.973          0.
              5.4799E-02  1.3414E-02
   165.494      2         0.      1.8708E-03   5.973          0.
              5.4799E-02  1.3416E-02
   165.479      2         0.      1.8711E-03   5.973          0.
              5.4798E-02  1.3419E-02
   165.463      2         0.      1.8714E-03   5.973          0.
              5.4797E-02  1.3421E-02
   165.448      2         0.      1.8717E-03   5.973          0.
              5.4796E-02  1.3423E-02
   165.433      2         0.      1.8719E-03   5.973          0.
              5.4796E-02  1.3426E-02
   165.418      2         0.      1.8722E-03   5.973          0.
              5.4795E-02  1.3428E-02
   165.403      2         0.      1.8725E-03   5.973          0.
              5.4794E-02  1.3430E-02
   165.401      3         0.      1.8725E-03   5.973          0.
              5.4794E-02  1.3431E-02
   143.884     -1         0.      1.8472E-03   5.965      0.2234
              5.6598E-02  1.3886E-02
 Number of trials exceeded - last iteration delta =    21.52
   82.7342     -2         0.      1.3125E-03   6.040      0.2075
              6.5838E-02  8.9467E-03
   76.8233     -3         0.      1.8206E-03   6.013      0.1769
              6.3254E-02  1.1354E-02
   76.1680     -4         0.      1.4135E-03   6.017      0.1820
              6.3866E-02  1.0728E-02
   75.8601     -5         0.      1.7159E-03   6.017      0.1810
              6.3837E-02  1.0721E-02
   75.6417     -6         0.      1.4942E-03   6.017      0.1810
              6.3840E-02  1.0719E-02
   75.5419     -7         0.      1.6541E-03   6.017      0.1810
              6.3839E-02  1.0718E-02
   75.4831     -8         0.      1.5374E-03   6.017      0.1810
              6.3840E-02  1.0718E-02
   75.4545     -9         0.      1.6218E-03   6.017      0.1810
              6.3839E-02  1.0718E-02
   75.4384    -10         0.      1.5603E-03   6.017      0.1810
              6.3840E-02  1.0718E-02
   75.4303    -11         0.      1.6049E-03   6.017      0.1810
              6.3839E-02  1.0718E-02
 Number of trials exceeded - last iteration delta =   8.1177E-03
   75.4260    -12         0.      1.5725E-03   6.017      0.1810
              6.3840E-02  1.0718E-02
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 1.13E-07 | -0.99  0.00 -0.01 -0.03 -0.10
 8.82E-07 |  0.10 -0.06 -0.02 -0.10 -0.99
 3.11E-06 | -0.02 -0.05 -0.06  0.99 -0.10
 7.41E-05 |  0.01  0.81 -0.59  0.00 -0.04
 2.78E-04 |  0.00  0.58  0.81  0.07 -0.05
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.5725E-03 +/-  0.3615E-03
    3    3    2   gaussian/b LineE    keV        6.017     +/-  0.1196E-01
    4    4    2   gaussian/b Sigma    keV       0.1810     +/-  0.1438E-01
    5    5    2   gaussian/b norm               6.3840E-02 +/-  0.2116E-02
    6    3    3   gaussian/b LineE    keV        6.624     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1900     = par   4 *   1.049
    8    6    3   gaussian/b norm               1.0718E-02 +/-  0.1349E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      75.42596     using    84 PHA bins.
 Reduced chi-squared =     0.9547589     for     79 degrees of freedom
 Null hypothesis probability = 0.593

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad57018000g220170.cal peaks at 6.017 +/- 0.01196 keV
-> Standard Output From STOOL group_event_files:

1 ad57018000g300170m.unf 22212
1 ad57018000g300270h.unf 22212
1 ad57018000g300370l.unf 22212

-> Fetching GIS3_CALSRC256.2
-> Extracting ad57018000g320170.cal from ad57018000g300170m.unf ad57018000g300270h.unf ad57018000g300370l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.97E+04     9659     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.97E+04     9659     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8001     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.97E+04     9659     1024
      2 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8001     1024
      3 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.58E+04     4552     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9659      1029           8630         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8001       822           7179         0         0         0
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4552       568           3984         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22212      2419          19793         0         0         0
   in  23856.     seconds
 Spectrum         has     2419 counts for 0.1014     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 23856.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad57018000g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA > read events ad57018000g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300270h.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > read events ad57018000g300370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad57018000g320170.cal group=yes
Wrote spectrum to ad57018000g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad57018000g320170.cal
-> gis3v4_0.rmf already present in current directory
-> Plotting ad57018000g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 08:03:13 25-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad57018000g320170.cal;
 Net count rate (cts/s) for file   1  0.1014    +/-  2.0732E-03
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     4.1156232E+07 using    84 PHA bins.
 Reduced chi-squared =      541529.4     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     4.1156232E+07 using    84 PHA bins.
 Reduced chi-squared =      534496.5     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     4.1156232E+07 using    84 PHA bins.
 Reduced chi-squared =      527644.0     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      1367.251     using    84 PHA bins.
 Reduced chi-squared =      17.30697     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   377.799     -2         0.      2.0039E-03   5.781          0.
              4.9070E-02  1.7954E-02
   143.863     -3         0.      6.4404E-04   5.898          0.
              5.1651E-02  1.4645E-02
   113.875     -4         0.      1.9021E-03   5.897          0.
              5.7717E-02  1.1363E-02
   107.391     -5         0.      9.2844E-04   5.892          0.
              5.7706E-02  1.1427E-02
   105.832     -6         0.      1.6499E-03   5.886          0.
              5.7704E-02  1.1428E-02
   104.574     -1         0.      1.1289E-03   5.878          0.
              5.7159E-02  1.2259E-02
   103.351      0         0.      1.2816E-03   5.873          0.
              5.7485E-02  1.2180E-02
   103.281      0         0.      1.3138E-03   5.861          0.
              5.7498E-02  1.2152E-02
   103.177      0         0.      1.3112E-03   5.859          0.
              5.7557E-02  1.2116E-02
 Number of trials exceeded - last iteration delta =   0.1039
   103.088      0         0.      1.3091E-03   5.857          0.
              5.7612E-02  1.2083E-02
   103.012      0         0.      1.3074E-03   5.854          0.
              5.7662E-02  1.2053E-02
   103.003      1         0.      1.3072E-03   5.854          0.
              5.7669E-02  1.2049E-02
   101.536     -3         0.      1.2120E-03   5.904      0.1438
              5.8205E-02  1.1258E-02
   77.2915     -4         0.      1.0756E-03   5.883      0.1207
              6.0820E-02  9.8802E-03
   76.8897     -5         0.      1.1459E-03   5.888      0.1214
              6.1010E-02  9.7581E-03
   76.8311     -6         0.      1.0932E-03   5.888      0.1214
              6.1063E-02  9.7027E-03
   76.8163     -7         0.      1.1357E-03   5.888      0.1214
              6.1075E-02  9.6917E-03
   76.8096     -8         0.      1.1018E-03   5.888      0.1215
              6.1079E-02  9.6886E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 8.99E-08 | -1.00  0.00 -0.01 -0.03 -0.09
 7.09E-07 |  0.10 -0.05 -0.01 -0.06 -0.99
 2.82E-06 | -0.02 -0.05 -0.04  1.00 -0.06
 2.13E-04 |  0.00  0.33  0.94  0.05 -0.03
 6.06E-05 |  0.00 -0.94  0.33 -0.03  0.05
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.1018E-03 +/-  0.3199E-03
    3    3    2   gaussian/b LineE    keV        5.888     +/-  0.8757E-02
    4    4    2   gaussian/b Sigma    keV       0.1215     +/-  0.1399E-01
    5    5    2   gaussian/b norm               6.1079E-02 +/-  0.1857E-02
    6    3    3   gaussian/b LineE    keV        6.483     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1274     = par   4 *   1.049
    8    6    3   gaussian/b norm               9.6886E-03 +/-  0.1036E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      76.80959     using    84 PHA bins.
 Reduced chi-squared =     0.9722733     for     79 degrees of freedom
 Null hypothesis probability = 0.549

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad57018000g320170.cal peaks at 5.888 +/- 0.008757 keV

Extracting bright and dark Earth event files. (8:3:21)

-> Extracting bright and dark Earth events from ad57018000s000102h.unf
-> Extracting ad57018000s000102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.71E+04    72380 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          72380      6956              0     65424         0         0
 Writing events file
   6956 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         72380      6956              0     65424         0         0
   in  840.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad57018000s000102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s000102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         6956
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :              54        4774
 Flickering pixels iter, pixels & cnts :   1          24         267
cleaning chip # 1
 Hot pixels & counts                   :              28        1737
 Flickering pixels iter, pixels & cnts :   1          10          73
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :          116
 Number of (internal) image counts   :         6956
 Number of image cts rejected (N, %) :         685198.49
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            78           38            0            0
 
 Image counts      :          5096         1860            0            0
 Image cts rejected:          5041         1810            0            0
 Image cts rej (%) :         98.92        97.31         0.00         0.00
 
    filtering data...
 
 Total counts      :          5096         1860            0            0
 Total cts rejected:          5041         1810            0            0
 Total cts rej (%) :         98.92        97.31         0.00         0.00
 
 Number of clean counts accepted  :          105
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          116
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000s000112h.unf
-> Extracting ad57018000s000112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.71E+04    73454 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          73454      6973              0     66481         0         0
 Writing events file
   6973 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         73454      6973              0     66481         0         0
   in  840.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad57018000s000112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s000112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         6973
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :              54        4776
 Flickering pixels iter, pixels & cnts :   1          24         270
cleaning chip # 1
 Hot pixels & counts                   :              28        1737
 Flickering pixels iter, pixels & cnts :   1          10          73
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :          116
 Number of (internal) image counts   :         6973
 Number of image cts rejected (N, %) :         685698.32
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            78           38            0            0
 
 Image counts      :          5102         1871            0            0
 Image cts rejected:          5046         1810            0            0
 Image cts rej (%) :         98.90        96.74         0.00         0.00
 
    filtering data...
 
 Total counts      :          5102         1871            0            0
 Total cts rejected:          5046         1810            0            0
 Total cts rej (%) :         98.90        96.74         0.00         0.00
 
 Number of clean counts accepted  :          117
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          116
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000s000202m.unf
-> Extracting ad57018000s000202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.10E+05    79912 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          79912       997              0     78915         0         0
 Writing events file
    997 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         79912       997              0     78915         0         0
   in  102.22     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad57018000s000202m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s000202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          997
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :              47         581
 Flickering pixels iter, pixels & cnts :   1          11          47
cleaning chip # 1
 Hot pixels & counts                   :              16         173
 Flickering pixels iter, pixels & cnts :   1           8          28
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           82
 Number of (internal) image counts   :          997
 Number of image cts rejected (N, %) :          82983.15
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            58           24            0            0
 
 Image counts      :           654          343            0            0
 Image cts rejected:           628          201            0            0
 Image cts rej (%) :         96.02        58.60         0.00         0.00
 
    filtering data...
 
 Total counts      :           654          343            0            0
 Total cts rejected:           628          201            0            0
 Total cts rej (%) :         96.02        58.60         0.00         0.00
 
 Number of clean counts accepted  :          168
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           82
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000s000302l.unf
-> Extracting ad57018000s000302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 W50 EAST RI BRIGHT      LOW         1999-04-01  15:30:05    0.66E+04    27182 1100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s000302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          27182     21382              0      5800         0         0
 Writing events file
  21382 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         27182     21382              0      5800         0         0
   in  3388.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad57018000s000302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s000302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        21382
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :              50       12976
 Flickering pixels iter, pixels & cnts :   1          31         460
cleaning chip # 1
 Hot pixels & counts                   :              32        7496
 Flickering pixels iter, pixels & cnts :   1          19         191
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :          132
 Number of (internal) image counts   :        21382
 Number of image cts rejected (N, %) :        2112398.79
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            81           51            0            0
 
 Image counts      :         13568         7814            0            0
 Image cts rejected:         13436         7687            0            0
 Image cts rej (%) :         99.03        98.37         0.00         0.00
 
    filtering data...
 
 Total counts      :         13568         7814            0            0
 Total cts rejected:         13436         7687            0            0
 Total cts rej (%) :         99.03        98.37         0.00         0.00
 
 Number of clean counts accepted  :          259
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          132
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000s100102h.unf
-> Extracting ad57018000s100102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      HIGH        1999-04-01  14:26:06    0.72E+04    86846 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          86846      9005              0     77841         0         0
 Writing events file
   9005 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         86846      9005              0     77841         0         0
   in  844.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad57018000s100102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s100102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         9005
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :              52        4012
 Flickering pixels iter, pixels & cnts :   1          39         394
cleaning chip # 3
 Hot pixels & counts                   :              55        4209
 Flickering pixels iter, pixels & cnts :   1          29         290
 
 Number of pixels rejected           :          175
 Number of (internal) image counts   :         9005
 Number of image cts rejected (N, %) :         890598.89
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0           91           84
 
 Image counts      :             0            0         4464         4541
 Image cts rejected:             0            0         4406         4499
 Image cts rej (%) :          0.00         0.00        98.70        99.08
 
    filtering data...
 
 Total counts      :             0            0         4464         4541
 Total cts rejected:             0            0         4406         4499
 Total cts rej (%) :          0.00         0.00        98.70        99.08
 
 Number of clean counts accepted  :          100
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          175
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000s100112h.unf
-> Extracting ad57018000s100112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT2     HIGH        1999-04-01  14:26:06    0.72E+04    87604 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          87604      9037              0     78567         0         0
 Writing events file
   9037 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         87604      9037              0     78567         0         0
   in  844.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad57018000s100112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s100112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         9037
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :              52        4031
 Flickering pixels iter, pixels & cnts :   1          39         395
cleaning chip # 3
 Hot pixels & counts                   :              55        4209
 Flickering pixels iter, pixels & cnts :   1          29         291
 
 Number of pixels rejected           :          175
 Number of (internal) image counts   :         9037
 Number of image cts rejected (N, %) :         892698.77
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0           91           84
 
 Image counts      :             0            0         4489         4548
 Image cts rejected:             0            0         4426         4500
 Image cts rej (%) :          0.00         0.00        98.60        98.94
 
    filtering data...
 
 Total counts      :             0            0         4489         4548
 Total cts rejected:             0            0         4426         4500
 Total cts rej (%) :          0.00         0.00        98.60        98.94
 
 Number of clean counts accepted  :          111
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          175
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000s100202m.unf
-> Extracting ad57018000s100202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      MEDIUM      1999-04-01  15:36:25    0.10E+05   117068 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         117068      1117              0    115951         0         0
 Writing events file
   1117 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        117068      1117              0    115951         0         0
   in  94.225     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad57018000s100202m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s100202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1117
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :              35         394
 Flickering pixels iter, pixels & cnts :   1          21         100
cleaning chip # 3
 Hot pixels & counts                   :              37         410
 Flickering pixels iter, pixels & cnts :   1          26         131
 
 Number of pixels rejected           :          119
 Number of (internal) image counts   :         1117
 Number of image cts rejected (N, %) :         103592.66
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0           56           63
 
 Image counts      :             0            0          546          571
 Image cts rejected:             0            0          494          541
 Image cts rej (%) :          0.00         0.00        90.48        94.75
 
    filtering data...
 
 Total counts      :             0            0          546          571
 Total cts rejected:             0            0          494          541
 Total cts rej (%) :          0.00         0.00        90.48        94.75
 
 Number of clean counts accepted  :           82
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          119
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000s100302l.unf
-> Extracting ad57018000s100302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 W50 EAST RI BRIGHT      LOW         1999-04-01  15:30:05    0.66E+04    36942 0011
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000s100302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          36942     27136              0      9806         0         0
 Writing events file
  27136 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36942     27136              0      9806         0         0
   in  3388.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad57018000s100302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad57018000s100302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        27136
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
 Hot pixels & counts                   :              49       12734
 Flickering pixels iter, pixels & cnts :   1          41         761
cleaning chip # 3
 Hot pixels & counts                   :              52       13015
 Flickering pixels iter, pixels & cnts :   1          25         488
 
 Number of pixels rejected           :          167
 Number of (internal) image counts   :        27136
 Number of image cts rejected (N, %) :        2699899.49
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0           90           77
 
 Image counts      :             0            0        13568        13568
 Image cts rejected:             0            0        13495        13503
 Image cts rej (%) :          0.00         0.00        99.46        99.52
 
    filtering data...
 
 Total counts      :             0            0        13568        13568
 Total cts rejected:             0            0        13495        13503
 Total cts rej (%) :          0.00         0.00        99.46        99.52
 
 Number of clean counts accepted  :          138
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          167
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad57018000g200170m.unf
-> Extracting ad57018000g200170m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.96E+04     9904     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9904        55              0      9849         0         0
 Writing events file
     55 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9904        55              0      9849         0         0
   in  80.100     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad57018000g200170m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.96E+04     9904     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9904      1802              0      8102         0         0
 Writing events file
   1802 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9904      1802              0      8102         0         0
   in  1183.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g200170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad57018000g200270h.unf
-> Extracting ad57018000g200270h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8462     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8462       967              0      7495         0         0
 Writing events file
    967 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8462       967              0      7495         0         0
   in  1924.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g200270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad57018000g200270h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8462     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8462       162              0      8300         0         0
 Writing events file
    162 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8462       162              0      8300         0         0
   in  224.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g200270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad57018000g200370l.unf
-> Extracting ad57018000g200370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.56E+04     4418     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4418      1593              0      2825         0         0
 Writing events file
   1593 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4418      1593              0      2825         0         0
   in  3296.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad57018000g200370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.56E+04     4418     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4418      2526              0      1892         0         0
 Writing events file
   2526 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4418      2526              0      1892         0         0
   in  1824.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad57018000g300170m.unf
-> Extracting ad57018000g300170m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.97E+04     9659     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9659        44              0      9615         0         0
 Writing events file
     44 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9659        44              0      9615         0         0
   in  96.099     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad57018000g300170m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          MEDIUM      1999-04-01  14:21:44    0.97E+04     9659     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300170m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9659      1833              0      7826         0         0
 Writing events file
   1833 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9659      1833              0      7826         0         0
   in  1183.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g300170m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad57018000g300270h.unf
-> Extracting ad57018000g300270h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8001     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8001       940              0      7061         0         0
 Writing events file
    940 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8001       940              0      7061         0         0
   in  1924.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g300270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad57018000g300270h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          HIGH        1999-04-01  14:26:16    0.84E+04     8001     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300270h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8001       176              0      7825         0         0
 Writing events file
    176 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8001       176              0      7825         0         0
   in  224.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g300270h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad57018000g300370l.unf
-> Extracting ad57018000g300370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.58E+04     4552     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4552      1424              0      3128         0         0
 Writing events file
   1424 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4552      1424              0      3128         0         0
   in  3360.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad57018000g300370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 W50 EAST RI PH          LOW         1999-04-01  15:49:28    0.58E+04     4552     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data13/seq_proc/ad0_57018000.004/ad57018000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4552      2856              0      1696         0         0
 Writing events file
   2856 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4552      2856              0      1696         0         0
   in  2016.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data13/seq_proc/ad0_57018000.004/
Setting mkf directory to /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA > read events ad57018000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data13/seq_proc/ad0_57018000.004/
HK Directory is: /data/data13/seq_proc/ad0_57018000.004/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

Determining information about this observation (8:13:4)

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory

Generating event file information page (8:14:19)

-> Summing time and events for s0 event files
-> listing ad57018000s000102h.unf
-> listing ad57018000s000202m.unf
-> listing ad57018000s000302l.unf
-> listing ad57018000s000112h.unf
-> listing ad57018000s000101h.unf
-> Summing time and events for s1 event files
-> listing ad57018000s100102h.unf
-> listing ad57018000s100202m.unf
-> listing ad57018000s100302l.unf
-> listing ad57018000s100112h.unf
-> listing ad57018000s100101h.unf
-> Summing time and events for g2 event files
-> listing ad57018000g200270h.unf
-> listing ad57018000g200170m.unf
-> listing ad57018000g200370l.unf
-> Summing time and events for g3 event files
-> listing ad57018000g300270h.unf
-> listing ad57018000g300170m.unf
-> listing ad57018000g300370l.unf

Creating HTML header page (8:18:39)

Creating HTML source list (8:18:53)

Doing final wrapup of all files (8:20:1)

-> Copying job.par to ad57018000_004_job.par
-> Copying ad0.par to ad57018000_004_process.par
-> Creating ad57018000_tape.cat
-> Creating ad57018000_trend.cat
-> Creating ad57018000_004_file_info.html
-> Calculating site-independant checksums
-> Site independant checksum: 64751
-> Updating FITS checksum keywords
-> Running fverify on all FITS files