Processing Job Log for Sequence 76025000, version 003

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (1:48:41)

Checking input files for validity (1:48:43)

-> Verifying the input files
-> FITS file fa981208_0033.0345 exists
-> FITS file ft981208_0033.0345 exists
-> FITS file ad76025000_input.cat exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 1.8723083E+08 = 1998-12-08 00:33:46
-> Observation ends 1.8732874E+08 = 1998-12-09 03:45:36

Determine nominal pointing (1:48:56)

-> Checking fa981208_0033.0345 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect

Spacecraft Euler Angles: Phi=-5.80473 Theta=87.68961 Psi=-150.86205
Telescope pointing: R.A.=354.03996 Dec=2.07223 Roll=119.14389 degrees

-> Nominal spacecraft Euler angles: Phi=-5.8047263989624 Theta=87.689614926135 Psi=-150.86204819718
-> Nominal telescope pointing: R.A.=354.03996371003 Dec=2.0722342908918 Roll Angle=119.14389028644
-> Galactic Coordinates: Lii=88.112566 Bii=-55.626000

Running frfread on telemetry files (1:49:20)

-> Running frfread on ft981208_0033.0345
-> stdout output from frfread4

Dropping SF 152 with corrupted frame indicator
Dropping SF 178 with inconsistent datamode 0/31
Dropping SF 256 with inconsistent datamode 0/31
Dropping SF 394 with inconsistent datamode 0/31
Dropping SF 731 with inconsistent datamode 0/31
Dropping SF 894 with inconsistent datamode 0/31
Dropping SF 938 with inconsistent datamode 0/31
Dropping SF 940 with inconsistent datamode 0/31
Dropping SF 1109 with corrupted frame indicator
Dropping SF 1333 with inconsistent datamode 0/31
Dropping SF 1381 with inconsistent datamode 0/31
Dropping SF 1431 with corrupted frame indicator
SIS1 peak error time=187251516.64828 x=301 y=196 ph0=3 ph2=9 ph7=4
Dropping SF 1639 with inconsistent datamode 0/31
Dropping SF 1704 with corrupted frame indicator
Dropping SF 2321 with invalid bit rate 7
Dropping SF 3586 with corrupted frame indicator
607.998 second gap between superframes 3614 and 3615
Dropping SF 5549 with synch code word 0 = 249 not 250
Dropping SF 5550 with synch code word 1 = 195 not 243
Dropping SF 5551 with synch code word 1 = 242 not 243
Dropping SF 5552 with corrupted frame indicator
Dropping SF 5553 with corrupted frame indicator
GIS2 coordinate error time=187266763.46648 x=96 y=0 pha=0 rise=0
GIS2 coordinate error time=187266763.81804 x=0 y=0 pha=24 rise=0
GIS2 coordinate error time=187266764.16179 x=24 y=0 pha=0 rise=0
GIS2 coordinate error time=187266764.2321 x=0 y=0 pha=24 rise=0
GIS2 coordinate error time=187266764.33757 x=0 y=0 pha=96 rise=0
SIS0 peak error time=187266756.60222 x=320 y=85 ph0=124 ph4=797
SIS0 peak error time=187266756.60222 x=42 y=323 ph0=113 ph3=419
SIS0 coordinate error time=187266756.60222 x=0 y=48 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=187266756.60222
Dropping SF 5555 with synch code word 0 = 252 not 250
Dropping SF 5556 with synch code word 0 = 58 not 250
Dropping SF 5557 with synch code word 0 = 122 not 250
Dropping SF 5558 with synch code word 1 = 240 not 243
GIS2 coordinate error time=187266773.10317 x=0 y=0 pha=192 rise=0
Dropping SF 5560 with synch code word 0 = 202 not 250
GIS2 coordinate error time=187266779.78674 x=0 y=0 pha=6 rise=0
GIS2 coordinate error time=187266780.39612 x=0 y=0 pha=3 rise=0
GIS2 coordinate error time=187266780.72814 x=96 y=0 pha=0 rise=0
SIS1 coordinate error time=187266772.60217 x=0 y=0 pha[0]=12 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=187266772.60217
SIS1 coordinate error time=187266772.60217 x=0 y=0 pha[0]=3072 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=187266772.60217
GIS3 coordinate error time=187266784.06017 x=0 y=0 pha=512 rise=0
SIS0 coordinate error time=187266776.60216 x=24 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=187266776.60216
SIS0 coordinate error time=187266776.60216 x=0 y=6 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=187266776.60216
Dropping SF 5565 with corrupted frame indicator
GIS2 coordinate error time=187266788.67734 x=0 y=0 pha=192 rise=0
Dropping SF 5567 with synch code word 0 = 122 not 250
Dropping SF 5568 with synch code word 2 = 56 not 32
GIS3 coordinate error time=187268813.83921 x=0 y=0 pha=512 rise=0
SIS1 coordinate error time=187268804.59604 x=1 y=256 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=187268804.59604
Dropping SF 6482 with synch code word 2 = 16 not 32
Dropping SF 6483 with synch code word 0 = 202 not 250
Dropping SF 6484 with synch code word 0 = 249 not 250
GIS2 coordinate error time=187268821.05403 x=0 y=0 pha=768 rise=0
GIS2 coordinate error time=187268821.99153 x=192 y=0 pha=0 rise=0
SIS1 coordinate error time=187268812.59602 x=0 y=12 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=187268812.59602
SIS1 coordinate error time=187268812.59602 x=0 y=0 pha[0]=0 chip=3
GIS2 coordinate error time=187268823.14777 x=0 y=0 pha=384 rise=0
SIS0 coordinate error time=187268816.59601 x=0 y=0 pha[0]=24 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=187268816.59601
5483.98 second gap between superframes 7381 and 7382
611.998 second gap between superframes 7437 and 7438
45.9999 second gap between superframes 9428 and 9429
Dropping SF 9785 with corrupted frame indicator
Dropping SF 9786 with inconsistent CCD ID 3/1
Dropping SF 9787 with invalid bit rate 7
Dropping SF 9788 with inconsistent datamode 0/31
Dropping SF 9789 with invalid bit rate 7
Dropped 1st C2 read after clocking change in ft981208_0033_0345S003201H.fits
Dropped 1st C1 read after clocking change in ft981208_0033_0345S003201H.fits
Dropped 1st C1 read after clocking change in ft981208_0033_0345S003401H.fits
81.9997 second gap between superframes 11653 and 11654
Warning: GIS2 bit assignment changed between 187293246.64751 and 187293248.6475
Warning: GIS3 bit assignment changed between 187293258.64747 and 187293260.64747
Warning: GIS2 bit assignment changed between 187293268.64744 and 187293270.64744
Warning: GIS3 bit assignment changed between 187293274.64743 and 187293276.64742
Dropping SF 12012 with inconsistent datamode 0/31
1.99999 second gap between superframes 12966 and 12967
71.9998 second gap between superframes 13922 and 13923
Dropping SF 14081 with inconsistent datamode 0/31
Dropping SF 14082 with inconsistent datamode 0/31
Dropping SF 14083 which is 24.7799 seconds out of synch
Dropping SF 14084 with synch code word 0 = 207 not 250
Dropping SF 14264 with inconsistent datamode 0/31
Dropping SF 14268 with inconsistent datamode 0/31
73.9998 second gap between superframes 16210 and 16211
Warning: GIS2 bit assignment changed between 187305268.61147 and 187305270.61147
Warning: GIS3 bit assignment changed between 187305282.61143 and 187305284.61143
Warning: GIS2 bit assignment changed between 187305292.6114 and 187305294.6114
Warning: GIS3 bit assignment changed between 187305300.61138 and 187305302.61137
SIS0 peak error time=187305852.4847 x=129 y=321 ph0=193 ph6=3338
SIS0 peak error time=187305852.4847 x=131 y=321 ph0=184 ph1=2205 ph2=739
Dropping SF 16547 with corrupted frame indicator
Dropping SF 16548 with inconsistent datamode 0/31
Dropping SF 16550 with corrupted frame indicator
Dropping SF 16551 with inconsistent datamode 0/31
Dropping SF 17372 with inconsistent datamode 0/10
Dropped 1st C0 read after clocking change in ft981208_0033_0345S104801H.fits
Dropped 1st C3 read after clocking change in ft981208_0033_0345S104801H.fits
Dropping SF 18481 with synch code word 0 = 154 not 250
Dropping SF 18482 with synch code word 0 = 252 not 250
Dropping SF 18483 with synch code word 0 = 122 not 250
GIS2 coordinate error time=187311092.22777 x=128 y=0 pha=1 rise=0
Dropping SF 18486 with synch code word 1 = 242 not 243
Dropping SF 18487 with synch code word 2 = 38 not 32
93.9997 second gap between superframes 18536 and 18537
Dropped 1st C3 read after clocking change in ft981208_0033_0345S105001H.fits
Dropping SF 18814 with inconsistent datamode 0/31
20203 of 20258 super frames processed

-> 0% of superframes in ft981208_0033.0345 corrupted
-> Deleting the following files with NEVENTS=0

ft981208_0033_0345G200770M.fits
ft981208_0033_0345G202570H.fits
ft981208_0033_0345G202670H.fits
ft981208_0033_0345G202770H.fits
ft981208_0033_0345G202870H.fits
ft981208_0033_0345G202970H.fits
ft981208_0033_0345G203070M.fits
ft981208_0033_0345G203170H.fits
ft981208_0033_0345G203270H.fits
ft981208_0033_0345G204270L.fits
ft981208_0033_0345G204370H.fits
ft981208_0033_0345G204470H.fits
ft981208_0033_0345G204570H.fits
ft981208_0033_0345G204670H.fits
ft981208_0033_0345G204970H.fits
ft981208_0033_0345G205270M.fits
ft981208_0033_0345G205370L.fits
ft981208_0033_0345G205470L.fits
ft981208_0033_0345G205570H.fits
ft981208_0033_0345G205670H.fits
ft981208_0033_0345G205770H.fits
ft981208_0033_0345G205870H.fits
ft981208_0033_0345G206470H.fits
ft981208_0033_0345G206570L.fits
ft981208_0033_0345G206670H.fits
ft981208_0033_0345G206770H.fits
ft981208_0033_0345G207270H.fits
ft981208_0033_0345G207370H.fits
ft981208_0033_0345G207470H.fits
ft981208_0033_0345G207570H.fits
ft981208_0033_0345G208170H.fits
ft981208_0033_0345G208270L.fits
ft981208_0033_0345G208370L.fits
ft981208_0033_0345G208470H.fits
ft981208_0033_0345G208570H.fits
ft981208_0033_0345G208670H.fits
ft981208_0033_0345G208970H.fits
ft981208_0033_0345G209070H.fits
ft981208_0033_0345G209170L.fits
ft981208_0033_0345G209270H.fits
ft981208_0033_0345G209370H.fits
ft981208_0033_0345G209770H.fits
ft981208_0033_0345G209870H.fits
ft981208_0033_0345G209970H.fits
ft981208_0033_0345G210070H.fits
ft981208_0033_0345G210870H.fits
ft981208_0033_0345G210970L.fits
ft981208_0033_0345G211070H.fits
ft981208_0033_0345G211270H.fits
ft981208_0033_0345G211370H.fits
ft981208_0033_0345G212170M.fits
ft981208_0033_0345G212270L.fits
ft981208_0033_0345G212370M.fits
ft981208_0033_0345G300770M.fits
ft981208_0033_0345G302570H.fits
ft981208_0033_0345G302670H.fits
ft981208_0033_0345G302770H.fits
ft981208_0033_0345G302870M.fits
ft981208_0033_0345G302970H.fits
ft981208_0033_0345G303070H.fits
ft981208_0033_0345G303870L.fits
ft981208_0033_0345G303970H.fits
ft981208_0033_0345G304070H.fits
ft981208_0033_0345G304170H.fits
ft981208_0033_0345G304270H.fits
ft981208_0033_0345G304370H.fits
ft981208_0033_0345G304870M.fits
ft981208_0033_0345G304970L.fits
ft981208_0033_0345G305070L.fits
ft981208_0033_0345G305170H.fits
ft981208_0033_0345G305270H.fits
ft981208_0033_0345G305370H.fits
ft981208_0033_0345G305470H.fits
ft981208_0033_0345G306070H.fits
ft981208_0033_0345G306170H.fits
ft981208_0033_0345G306270L.fits
ft981208_0033_0345G306370H.fits
ft981208_0033_0345G306470H.fits
ft981208_0033_0345G306570H.fits
ft981208_0033_0345G307170H.fits
ft981208_0033_0345G307270H.fits
ft981208_0033_0345G307370H.fits
ft981208_0033_0345G307470H.fits
ft981208_0033_0345G307870H.fits
ft981208_0033_0345G307970L.fits
ft981208_0033_0345G308070L.fits
ft981208_0033_0345G308170H.fits
ft981208_0033_0345G308770H.fits
ft981208_0033_0345G308870L.fits
ft981208_0033_0345G308970H.fits
ft981208_0033_0345G309770H.fits
ft981208_0033_0345G309870H.fits
ft981208_0033_0345G309970H.fits
ft981208_0033_0345G310570H.fits
ft981208_0033_0345G310670H.fits
ft981208_0033_0345G310770L.fits
ft981208_0033_0345G310870H.fits
ft981208_0033_0345G311070H.fits
ft981208_0033_0345G311170H.fits
ft981208_0033_0345G311970M.fits
ft981208_0033_0345G312070L.fits
ft981208_0033_0345G312170M.fits
ft981208_0033_0345S005001L.fits
ft981208_0033_0345S104501L.fits

-> merging GTIs for s0 981208_0033.0345
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft981208_0033_0345S0HK.fits
-> Total ONTIME for s0 981208_0033.0345 = 85011.8
-> merging GTIs for s1 981208_0033.0345
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft981208_0033_0345S1HK.fits
-> Total ONTIME for s1 981208_0033.0345 = 85023.8
-> merging GTIs for g2 981208_0033.0345
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft981208_0033_0345G2HK.fits
-> Total ONTIME for g2 981208_0033.0345 = 72609.8
-> merging GTIs for g3 981208_0033.0345
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft981208_0033_0345G3HK.fits
-> Total ONTIME for g3 981208_0033.0345 = 72627.8

Merging event files from frfread (2:7:39)

-> Grouping s0 event files
-> stdout output from group_event_files

1 ft981208_0033_0345S000601H.fits 423648
1 ft981208_0033_0345S001101H.fits 423648
1 ft981208_0033_0345S001301H.fits 423648
1 ft981208_0033_0345S001501H.fits 423648
1 ft981208_0033_0345S001701H.fits 423648
1 ft981208_0033_0345S001901H.fits 423648
1 ft981208_0033_0345S002001H.fits 423648
1 ft981208_0033_0345S002201H.fits 423648
1 ft981208_0033_0345S002601H.fits 423648
1 ft981208_0033_0345S003101H.fits 423648
1 ft981208_0033_0345S003401H.fits 423648
1 ft981208_0033_0345S003801H.fits 423648
1 ft981208_0033_0345S004201H.fits 423648
1 ft981208_0033_0345S004601H.fits 423648
1 ft981208_0033_0345S004801H.fits 423648
1 ft981208_0033_0345S005201H.fits 423648
1 ft981208_0033_0345S005301H.fits 423648
1 ft981208_0033_0345S006001H.fits 423648
2 ft981208_0033_0345S000101M.fits 119020
2 ft981208_0033_0345S000301M.fits 119020
2 ft981208_0033_0345S000501M.fits 119020
2 ft981208_0033_0345S000801M.fits 119020
2 ft981208_0033_0345S001001M.fits 119020
2 ft981208_0033_0345S001201M.fits 119020
2 ft981208_0033_0345S001401M.fits 119020
2 ft981208_0033_0345S001801M.fits 119020
2 ft981208_0033_0345S002101M.fits 119020
2 ft981208_0033_0345S002701M.fits 119020
2 ft981208_0033_0345S004701M.fits 119020
2 ft981208_0033_0345S005501M.fits 119020
2 ft981208_0033_0345S005701M.fits 119020
2 ft981208_0033_0345S005901M.fits 119020
2 ft981208_0033_0345S006201M.fits 119020
2 ft981208_0033_0345S006401M.fits 119020
3 ft981208_0033_0345S000201L.fits 32517
3 ft981208_0033_0345S000401L.fits 32517
3 ft981208_0033_0345S000701L.fits 32517
3 ft981208_0033_0345S000901L.fits 32517
3 ft981208_0033_0345S002301L.fits 32517
3 ft981208_0033_0345S002501L.fits 32517
3 ft981208_0033_0345S002801L.fits 32517
3 ft981208_0033_0345S003001L.fits 32517
3 ft981208_0033_0345S003501L.fits 32517
3 ft981208_0033_0345S003701L.fits 32517
3 ft981208_0033_0345S003901L.fits 32517
3 ft981208_0033_0345S004101L.fits 32517
3 ft981208_0033_0345S004301L.fits 32517
3 ft981208_0033_0345S004501L.fits 32517
3 ft981208_0033_0345S004901L.fits 32517
3 ft981208_0033_0345S005101L.fits 32517
3 ft981208_0033_0345S005401L.fits 32517
3 ft981208_0033_0345S005601L.fits 32517
3 ft981208_0033_0345S005801L.fits 32517
3 ft981208_0033_0345S006101L.fits 32517
3 ft981208_0033_0345S006301L.fits 32517
4 ft981208_0033_0345S003201H.fits 9787
4 ft981208_0033_0345S003301H.fits 9787
5 ft981208_0033_0345S002401L.fits 224
5 ft981208_0033_0345S002901L.fits 224
5 ft981208_0033_0345S003601L.fits 224
5 ft981208_0033_0345S004001L.fits 224
5 ft981208_0033_0345S004401L.fits 224
6 ft981208_0033_0345S001601H.fits 193

-> Creating ad76025000s000101h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  18  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 18 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S000601H.fits 
 2 -- ft981208_0033_0345S001101H.fits 
 3 -- ft981208_0033_0345S001301H.fits 
 4 -- ft981208_0033_0345S001501H.fits 
 5 -- ft981208_0033_0345S001701H.fits 
 6 -- ft981208_0033_0345S001901H.fits 
 7 -- ft981208_0033_0345S002001H.fits 
 8 -- ft981208_0033_0345S002201H.fits 
 9 -- ft981208_0033_0345S002601H.fits 
 10 -- ft981208_0033_0345S003101H.fits 
 11 -- ft981208_0033_0345S003401H.fits 
 12 -- ft981208_0033_0345S003801H.fits 
 13 -- ft981208_0033_0345S004201H.fits 
 14 -- ft981208_0033_0345S004601H.fits 
 15 -- ft981208_0033_0345S004801H.fits 
 16 -- ft981208_0033_0345S005201H.fits 
 17 -- ft981208_0033_0345S005301H.fits 
 18 -- ft981208_0033_0345S006001H.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S000601H.fits 
 2 -- ft981208_0033_0345S001101H.fits 
 3 -- ft981208_0033_0345S001301H.fits 
 4 -- ft981208_0033_0345S001501H.fits 
 5 -- ft981208_0033_0345S001701H.fits 
 6 -- ft981208_0033_0345S001901H.fits 
 7 -- ft981208_0033_0345S002001H.fits 
 8 -- ft981208_0033_0345S002201H.fits 
 9 -- ft981208_0033_0345S002601H.fits 
 10 -- ft981208_0033_0345S003101H.fits 
 11 -- ft981208_0033_0345S003401H.fits 
 12 -- ft981208_0033_0345S003801H.fits 
 13 -- ft981208_0033_0345S004201H.fits 
 14 -- ft981208_0033_0345S004601H.fits 
 15 -- ft981208_0033_0345S004801H.fits 
 16 -- ft981208_0033_0345S005201H.fits 
 17 -- ft981208_0033_0345S005301H.fits 
 18 -- ft981208_0033_0345S006001H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000s000201m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  16  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 16 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S000101M.fits 
 2 -- ft981208_0033_0345S000301M.fits 
 3 -- ft981208_0033_0345S000501M.fits 
 4 -- ft981208_0033_0345S000801M.fits 
 5 -- ft981208_0033_0345S001001M.fits 
 6 -- ft981208_0033_0345S001201M.fits 
 7 -- ft981208_0033_0345S001401M.fits 
 8 -- ft981208_0033_0345S001801M.fits 
 9 -- ft981208_0033_0345S002101M.fits 
 10 -- ft981208_0033_0345S002701M.fits 
 11 -- ft981208_0033_0345S004701M.fits 
 12 -- ft981208_0033_0345S005501M.fits 
 13 -- ft981208_0033_0345S005701M.fits 
 14 -- ft981208_0033_0345S005901M.fits 
 15 -- ft981208_0033_0345S006201M.fits 
 16 -- ft981208_0033_0345S006401M.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S000101M.fits 
 2 -- ft981208_0033_0345S000301M.fits 
 3 -- ft981208_0033_0345S000501M.fits 
 4 -- ft981208_0033_0345S000801M.fits 
 5 -- ft981208_0033_0345S001001M.fits 
 6 -- ft981208_0033_0345S001201M.fits 
 7 -- ft981208_0033_0345S001401M.fits 
 8 -- ft981208_0033_0345S001801M.fits 
 9 -- ft981208_0033_0345S002101M.fits 
 10 -- ft981208_0033_0345S002701M.fits 
 11 -- ft981208_0033_0345S004701M.fits 
 12 -- ft981208_0033_0345S005501M.fits 
 13 -- ft981208_0033_0345S005701M.fits 
 14 -- ft981208_0033_0345S005901M.fits 
 15 -- ft981208_0033_0345S006201M.fits 
 16 -- ft981208_0033_0345S006401M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000s000301l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  21  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 21 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S000201L.fits 
 2 -- ft981208_0033_0345S000401L.fits 
 3 -- ft981208_0033_0345S000701L.fits 
 4 -- ft981208_0033_0345S000901L.fits 
 5 -- ft981208_0033_0345S002301L.fits 
 6 -- ft981208_0033_0345S002501L.fits 
 7 -- ft981208_0033_0345S002801L.fits 
 8 -- ft981208_0033_0345S003001L.fits 
 9 -- ft981208_0033_0345S003501L.fits 
 10 -- ft981208_0033_0345S003701L.fits 
 11 -- ft981208_0033_0345S003901L.fits 
 12 -- ft981208_0033_0345S004101L.fits 
 13 -- ft981208_0033_0345S004301L.fits 
 14 -- ft981208_0033_0345S004501L.fits 
 15 -- ft981208_0033_0345S004901L.fits 
 16 -- ft981208_0033_0345S005101L.fits 
 17 -- ft981208_0033_0345S005401L.fits 
 18 -- ft981208_0033_0345S005601L.fits 
 19 -- ft981208_0033_0345S005801L.fits 
 20 -- ft981208_0033_0345S006101L.fits 
 21 -- ft981208_0033_0345S006301L.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S000201L.fits 
 2 -- ft981208_0033_0345S000401L.fits 
 3 -- ft981208_0033_0345S000701L.fits 
 4 -- ft981208_0033_0345S000901L.fits 
 5 -- ft981208_0033_0345S002301L.fits 
 6 -- ft981208_0033_0345S002501L.fits 
 7 -- ft981208_0033_0345S002801L.fits 
 8 -- ft981208_0033_0345S003001L.fits 
 9 -- ft981208_0033_0345S003501L.fits 
 10 -- ft981208_0033_0345S003701L.fits 
 11 -- ft981208_0033_0345S003901L.fits 
 12 -- ft981208_0033_0345S004101L.fits 
 13 -- ft981208_0033_0345S004301L.fits 
 14 -- ft981208_0033_0345S004501L.fits 
 15 -- ft981208_0033_0345S004901L.fits 
 16 -- ft981208_0033_0345S005101L.fits 
 17 -- ft981208_0033_0345S005401L.fits 
 18 -- ft981208_0033_0345S005601L.fits 
 19 -- ft981208_0033_0345S005801L.fits 
 20 -- ft981208_0033_0345S006101L.fits 
 21 -- ft981208_0033_0345S006301L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000s000401h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S003201H.fits 
 2 -- ft981208_0033_0345S003301H.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S003201H.fits 
 2 -- ft981208_0033_0345S003301H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 224 events ft981208_0033_0345S002401L.fits ft981208_0033_0345S002901L.fits ft981208_0033_0345S003601L.fits ft981208_0033_0345S004001L.fits ft981208_0033_0345S004401L.fits
-> Ignoring the following files containing 193 events ft981208_0033_0345S001601H.fits
-> Grouping s1 event files
-> stdout output from group_event_files

1 ft981208_0033_0345S100601H.fits 512459
1 ft981208_0033_0345S101101H.fits 512459
1 ft981208_0033_0345S101301H.fits 512459
1 ft981208_0033_0345S101501H.fits 512459
1 ft981208_0033_0345S101701H.fits 512459
1 ft981208_0033_0345S101901H.fits 512459
1 ft981208_0033_0345S102301H.fits 512459
1 ft981208_0033_0345S102801H.fits 512459
1 ft981208_0033_0345S102901H.fits 512459
1 ft981208_0033_0345S103301H.fits 512459
1 ft981208_0033_0345S103701H.fits 512459
1 ft981208_0033_0345S104101H.fits 512459
1 ft981208_0033_0345S104301H.fits 512459
1 ft981208_0033_0345S104701H.fits 512459
1 ft981208_0033_0345S105001H.fits 512459
1 ft981208_0033_0345S105701H.fits 512459
2 ft981208_0033_0345S100101M.fits 180451
2 ft981208_0033_0345S100301M.fits 180451
2 ft981208_0033_0345S100501M.fits 180451
2 ft981208_0033_0345S100801M.fits 180451
2 ft981208_0033_0345S101001M.fits 180451
2 ft981208_0033_0345S101201M.fits 180451
2 ft981208_0033_0345S101401M.fits 180451
2 ft981208_0033_0345S101601M.fits 180451
2 ft981208_0033_0345S101801M.fits 180451
2 ft981208_0033_0345S102401M.fits 180451
2 ft981208_0033_0345S104201M.fits 180451
2 ft981208_0033_0345S105201M.fits 180451
2 ft981208_0033_0345S105401M.fits 180451
2 ft981208_0033_0345S105601M.fits 180451
2 ft981208_0033_0345S105901M.fits 180451
2 ft981208_0033_0345S106101M.fits 180451
3 ft981208_0033_0345S100201L.fits 32720
3 ft981208_0033_0345S100401L.fits 32720
3 ft981208_0033_0345S100701L.fits 32720
3 ft981208_0033_0345S100901L.fits 32720
3 ft981208_0033_0345S102001L.fits 32720
3 ft981208_0033_0345S102201L.fits 32720
3 ft981208_0033_0345S102501L.fits 32720
3 ft981208_0033_0345S102701L.fits 32720
3 ft981208_0033_0345S103001L.fits 32720
3 ft981208_0033_0345S103201L.fits 32720
3 ft981208_0033_0345S103401L.fits 32720
3 ft981208_0033_0345S103601L.fits 32720
3 ft981208_0033_0345S103801L.fits 32720
3 ft981208_0033_0345S104001L.fits 32720
3 ft981208_0033_0345S104401L.fits 32720
3 ft981208_0033_0345S104601L.fits 32720
3 ft981208_0033_0345S105101L.fits 32720
3 ft981208_0033_0345S105301L.fits 32720
3 ft981208_0033_0345S105501L.fits 32720
3 ft981208_0033_0345S105801L.fits 32720
3 ft981208_0033_0345S106001L.fits 32720
4 ft981208_0033_0345S104801H.fits 11303
4 ft981208_0033_0345S104901H.fits 11303
5 ft981208_0033_0345S102101L.fits 225
5 ft981208_0033_0345S102601L.fits 225
5 ft981208_0033_0345S103101L.fits 225
5 ft981208_0033_0345S103501L.fits 225
5 ft981208_0033_0345S103901L.fits 225

-> Creating ad76025000s100101h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  16  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 16 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S100601H.fits 
 2 -- ft981208_0033_0345S101101H.fits 
 3 -- ft981208_0033_0345S101301H.fits 
 4 -- ft981208_0033_0345S101501H.fits 
 5 -- ft981208_0033_0345S101701H.fits 
 6 -- ft981208_0033_0345S101901H.fits 
 7 -- ft981208_0033_0345S102301H.fits 
 8 -- ft981208_0033_0345S102801H.fits 
 9 -- ft981208_0033_0345S102901H.fits 
 10 -- ft981208_0033_0345S103301H.fits 
 11 -- ft981208_0033_0345S103701H.fits 
 12 -- ft981208_0033_0345S104101H.fits 
 13 -- ft981208_0033_0345S104301H.fits 
 14 -- ft981208_0033_0345S104701H.fits 
 15 -- ft981208_0033_0345S105001H.fits 
 16 -- ft981208_0033_0345S105701H.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S100601H.fits 
 2 -- ft981208_0033_0345S101101H.fits 
 3 -- ft981208_0033_0345S101301H.fits 
 4 -- ft981208_0033_0345S101501H.fits 
 5 -- ft981208_0033_0345S101701H.fits 
 6 -- ft981208_0033_0345S101901H.fits 
 7 -- ft981208_0033_0345S102301H.fits 
 8 -- ft981208_0033_0345S102801H.fits 
 9 -- ft981208_0033_0345S102901H.fits 
 10 -- ft981208_0033_0345S103301H.fits 
 11 -- ft981208_0033_0345S103701H.fits 
 12 -- ft981208_0033_0345S104101H.fits 
 13 -- ft981208_0033_0345S104301H.fits 
 14 -- ft981208_0033_0345S104701H.fits 
 15 -- ft981208_0033_0345S105001H.fits 
 16 -- ft981208_0033_0345S105701H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000s100201m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  16  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 16 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S100101M.fits 
 2 -- ft981208_0033_0345S100301M.fits 
 3 -- ft981208_0033_0345S100501M.fits 
 4 -- ft981208_0033_0345S100801M.fits 
 5 -- ft981208_0033_0345S101001M.fits 
 6 -- ft981208_0033_0345S101201M.fits 
 7 -- ft981208_0033_0345S101401M.fits 
 8 -- ft981208_0033_0345S101601M.fits 
 9 -- ft981208_0033_0345S101801M.fits 
 10 -- ft981208_0033_0345S102401M.fits 
 11 -- ft981208_0033_0345S104201M.fits 
 12 -- ft981208_0033_0345S105201M.fits 
 13 -- ft981208_0033_0345S105401M.fits 
 14 -- ft981208_0033_0345S105601M.fits 
 15 -- ft981208_0033_0345S105901M.fits 
 16 -- ft981208_0033_0345S106101M.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S100101M.fits 
 2 -- ft981208_0033_0345S100301M.fits 
 3 -- ft981208_0033_0345S100501M.fits 
 4 -- ft981208_0033_0345S100801M.fits 
 5 -- ft981208_0033_0345S101001M.fits 
 6 -- ft981208_0033_0345S101201M.fits 
 7 -- ft981208_0033_0345S101401M.fits 
 8 -- ft981208_0033_0345S101601M.fits 
 9 -- ft981208_0033_0345S101801M.fits 
 10 -- ft981208_0033_0345S102401M.fits 
 11 -- ft981208_0033_0345S104201M.fits 
 12 -- ft981208_0033_0345S105201M.fits 
 13 -- ft981208_0033_0345S105401M.fits 
 14 -- ft981208_0033_0345S105601M.fits 
 15 -- ft981208_0033_0345S105901M.fits 
 16 -- ft981208_0033_0345S106101M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000s100301l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  21  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 21 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S100201L.fits 
 2 -- ft981208_0033_0345S100401L.fits 
 3 -- ft981208_0033_0345S100701L.fits 
 4 -- ft981208_0033_0345S100901L.fits 
 5 -- ft981208_0033_0345S102001L.fits 
 6 -- ft981208_0033_0345S102201L.fits 
 7 -- ft981208_0033_0345S102501L.fits 
 8 -- ft981208_0033_0345S102701L.fits 
 9 -- ft981208_0033_0345S103001L.fits 
 10 -- ft981208_0033_0345S103201L.fits 
 11 -- ft981208_0033_0345S103401L.fits 
 12 -- ft981208_0033_0345S103601L.fits 
 13 -- ft981208_0033_0345S103801L.fits 
 14 -- ft981208_0033_0345S104001L.fits 
 15 -- ft981208_0033_0345S104401L.fits 
 16 -- ft981208_0033_0345S104601L.fits 
 17 -- ft981208_0033_0345S105101L.fits 
 18 -- ft981208_0033_0345S105301L.fits 
 19 -- ft981208_0033_0345S105501L.fits 
 20 -- ft981208_0033_0345S105801L.fits 
 21 -- ft981208_0033_0345S106001L.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S100201L.fits 
 2 -- ft981208_0033_0345S100401L.fits 
 3 -- ft981208_0033_0345S100701L.fits 
 4 -- ft981208_0033_0345S100901L.fits 
 5 -- ft981208_0033_0345S102001L.fits 
 6 -- ft981208_0033_0345S102201L.fits 
 7 -- ft981208_0033_0345S102501L.fits 
 8 -- ft981208_0033_0345S102701L.fits 
 9 -- ft981208_0033_0345S103001L.fits 
 10 -- ft981208_0033_0345S103201L.fits 
 11 -- ft981208_0033_0345S103401L.fits 
 12 -- ft981208_0033_0345S103601L.fits 
 13 -- ft981208_0033_0345S103801L.fits 
 14 -- ft981208_0033_0345S104001L.fits 
 15 -- ft981208_0033_0345S104401L.fits 
 16 -- ft981208_0033_0345S104601L.fits 
 17 -- ft981208_0033_0345S105101L.fits 
 18 -- ft981208_0033_0345S105301L.fits 
 19 -- ft981208_0033_0345S105501L.fits 
 20 -- ft981208_0033_0345S105801L.fits 
 21 -- ft981208_0033_0345S106001L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000s100401h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  2  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 2 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345S104801H.fits 
 2 -- ft981208_0033_0345S104901H.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345S104801H.fits 
 2 -- ft981208_0033_0345S104901H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 225 events ft981208_0033_0345S102101L.fits ft981208_0033_0345S102601L.fits ft981208_0033_0345S103101L.fits ft981208_0033_0345S103501L.fits ft981208_0033_0345S103901L.fits
-> Grouping g2 event files
-> stdout output from group_event_files

1 ft981208_0033_0345G201370H.fits 62356
1 ft981208_0033_0345G202170H.fits 62356
1 ft981208_0033_0345G202370H.fits 62356
1 ft981208_0033_0345G203570H.fits 62356
1 ft981208_0033_0345G203770H.fits 62356
1 ft981208_0033_0345G203970H.fits 62356
1 ft981208_0033_0345G205070H.fits 62356
1 ft981208_0033_0345G206270H.fits 62356
1 ft981208_0033_0345G206370H.fits 62356
1 ft981208_0033_0345G207070H.fits 62356
1 ft981208_0033_0345G207170H.fits 62356
1 ft981208_0033_0345G207970H.fits 62356
1 ft981208_0033_0345G208870H.fits 62356
1 ft981208_0033_0345G209670H.fits 62356
1 ft981208_0033_0345G210370H.fits 62356
1 ft981208_0033_0345G210470H.fits 62356
1 ft981208_0033_0345G210670H.fits 62356
1 ft981208_0033_0345G211470H.fits 62356
1 ft981208_0033_0345G212870H.fits 62356
2 ft981208_0033_0345G200170M.fits 32644
2 ft981208_0033_0345G200670M.fits 32644
2 ft981208_0033_0345G200970M.fits 32644
2 ft981208_0033_0345G201270M.fits 32644
2 ft981208_0033_0345G201570M.fits 32644
2 ft981208_0033_0345G202070M.fits 32644
2 ft981208_0033_0345G202270M.fits 32644
2 ft981208_0033_0345G202470M.fits 32644
2 ft981208_0033_0345G203870M.fits 32644
2 ft981208_0033_0345G205170M.fits 32644
2 ft981208_0033_0345G210570M.fits 32644
2 ft981208_0033_0345G211970M.fits 32644
2 ft981208_0033_0345G212570M.fits 32644
2 ft981208_0033_0345G212770M.fits 32644
2 ft981208_0033_0345G213370M.fits 32644
2 ft981208_0033_0345G213970M.fits 32644
3 ft981208_0033_0345G200270L.fits 29435
3 ft981208_0033_0345G201170L.fits 29435
3 ft981208_0033_0345G201470L.fits 29435
3 ft981208_0033_0345G201670L.fits 29435
3 ft981208_0033_0345G204070L.fits 29435
3 ft981208_0033_0345G211570L.fits 29435
3 ft981208_0033_0345G212670L.fits 29435
3 ft981208_0033_0345G212970L.fits 29435
3 ft981208_0033_0345G213570L.fits 29435
4 ft981208_0033_0345G200570M.fits 191
4 ft981208_0033_0345G201970M.fits 191
4 ft981208_0033_0345G211870M.fits 191
4 ft981208_0033_0345G213270M.fits 191
4 ft981208_0033_0345G213870M.fits 191
5 ft981208_0033_0345G201070L.fits 134
5 ft981208_0033_0345G213470L.fits 134
6 ft981208_0033_0345G213070M.fits 130
7 ft981208_0033_0345G204170L.fits 116
8 ft981208_0033_0345G201770M.fits 84
9 ft981208_0033_0345G201870M.fits 75
10 ft981208_0033_0345G200370M.fits 73
11 ft981208_0033_0345G213170M.fits 64
12 ft981208_0033_0345G200470M.fits 42
13 ft981208_0033_0345G213670M.fits 31
14 ft981208_0033_0345G213770M.fits 28
15 ft981208_0033_0345G211770M.fits 23
16 ft981208_0033_0345G211670M.fits 21
17 ft981208_0033_0345G203370H.fits 14
17 ft981208_0033_0345G204870H.fits 14
17 ft981208_0033_0345G206070H.fits 14
17 ft981208_0033_0345G206870H.fits 14
17 ft981208_0033_0345G209470H.fits 14
18 ft981208_0033_0345G200870M.fits 11
19 ft981208_0033_0345G203470H.fits 11
19 ft981208_0033_0345G206170H.fits 11
19 ft981208_0033_0345G206970H.fits 11
19 ft981208_0033_0345G208770H.fits 11
19 ft981208_0033_0345G209570H.fits 11
20 ft981208_0033_0345G212470M.fits 10
21 ft981208_0033_0345G207770H.fits 9
21 ft981208_0033_0345G210270H.fits 9
22 ft981208_0033_0345G207670H.fits 5
22 ft981208_0033_0345G210170H.fits 5
23 ft981208_0033_0345G203670H.fits 4
24 ft981208_0033_0345G204770H.fits 3
24 ft981208_0033_0345G205970H.fits 3
24 ft981208_0033_0345G211170H.fits 3
25 ft981208_0033_0345G207870H.fits 3
26 ft981208_0033_0345G208070H.fits 2
26 ft981208_0033_0345G210770H.fits 2
27 ft981208_0033_0345G212070M.fits 1

-> Creating ad76025000g200170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  19  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 19 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345G201370H.fits 
 2 -- ft981208_0033_0345G202170H.fits 
 3 -- ft981208_0033_0345G202370H.fits 
 4 -- ft981208_0033_0345G203570H.fits 
 5 -- ft981208_0033_0345G203770H.fits 
 6 -- ft981208_0033_0345G203970H.fits 
 7 -- ft981208_0033_0345G205070H.fits 
 8 -- ft981208_0033_0345G206270H.fits 
 9 -- ft981208_0033_0345G206370H.fits 
 10 -- ft981208_0033_0345G207070H.fits 
 11 -- ft981208_0033_0345G207170H.fits 
 12 -- ft981208_0033_0345G207970H.fits 
 13 -- ft981208_0033_0345G208870H.fits 
 14 -- ft981208_0033_0345G209670H.fits 
 15 -- ft981208_0033_0345G210370H.fits 
 16 -- ft981208_0033_0345G210470H.fits 
 17 -- ft981208_0033_0345G210670H.fits 
 18 -- ft981208_0033_0345G211470H.fits 
 19 -- ft981208_0033_0345G212870H.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345G201370H.fits 
 2 -- ft981208_0033_0345G202170H.fits 
 3 -- ft981208_0033_0345G202370H.fits 
 4 -- ft981208_0033_0345G203570H.fits 
 5 -- ft981208_0033_0345G203770H.fits 
 6 -- ft981208_0033_0345G203970H.fits 
 7 -- ft981208_0033_0345G205070H.fits 
 8 -- ft981208_0033_0345G206270H.fits 
 9 -- ft981208_0033_0345G206370H.fits 
 10 -- ft981208_0033_0345G207070H.fits 
 11 -- ft981208_0033_0345G207170H.fits 
 12 -- ft981208_0033_0345G207970H.fits 
 13 -- ft981208_0033_0345G208870H.fits 
 14 -- ft981208_0033_0345G209670H.fits 
 15 -- ft981208_0033_0345G210370H.fits 
 16 -- ft981208_0033_0345G210470H.fits 
 17 -- ft981208_0033_0345G210670H.fits 
 18 -- ft981208_0033_0345G211470H.fits 
 19 -- ft981208_0033_0345G212870H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000g200270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  16  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 16 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345G200170M.fits 
 2 -- ft981208_0033_0345G200670M.fits 
 3 -- ft981208_0033_0345G200970M.fits 
 4 -- ft981208_0033_0345G201270M.fits 
 5 -- ft981208_0033_0345G201570M.fits 
 6 -- ft981208_0033_0345G202070M.fits 
 7 -- ft981208_0033_0345G202270M.fits 
 8 -- ft981208_0033_0345G202470M.fits 
 9 -- ft981208_0033_0345G203870M.fits 
 10 -- ft981208_0033_0345G205170M.fits 
 11 -- ft981208_0033_0345G210570M.fits 
 12 -- ft981208_0033_0345G211970M.fits 
 13 -- ft981208_0033_0345G212570M.fits 
 14 -- ft981208_0033_0345G212770M.fits 
 15 -- ft981208_0033_0345G213370M.fits 
 16 -- ft981208_0033_0345G213970M.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345G200170M.fits 
 2 -- ft981208_0033_0345G200670M.fits 
 3 -- ft981208_0033_0345G200970M.fits 
 4 -- ft981208_0033_0345G201270M.fits 
 5 -- ft981208_0033_0345G201570M.fits 
 6 -- ft981208_0033_0345G202070M.fits 
 7 -- ft981208_0033_0345G202270M.fits 
 8 -- ft981208_0033_0345G202470M.fits 
 9 -- ft981208_0033_0345G203870M.fits 
 10 -- ft981208_0033_0345G205170M.fits 
 11 -- ft981208_0033_0345G210570M.fits 
 12 -- ft981208_0033_0345G211970M.fits 
 13 -- ft981208_0033_0345G212570M.fits 
 14 -- ft981208_0033_0345G212770M.fits 
 15 -- ft981208_0033_0345G213370M.fits 
 16 -- ft981208_0033_0345G213970M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000g200370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345G200270L.fits 
 2 -- ft981208_0033_0345G201170L.fits 
 3 -- ft981208_0033_0345G201470L.fits 
 4 -- ft981208_0033_0345G201670L.fits 
 5 -- ft981208_0033_0345G204070L.fits 
 6 -- ft981208_0033_0345G211570L.fits 
 7 -- ft981208_0033_0345G212670L.fits 
 8 -- ft981208_0033_0345G212970L.fits 
 9 -- ft981208_0033_0345G213570L.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345G200270L.fits 
 2 -- ft981208_0033_0345G201170L.fits 
 3 -- ft981208_0033_0345G201470L.fits 
 4 -- ft981208_0033_0345G201670L.fits 
 5 -- ft981208_0033_0345G204070L.fits 
 6 -- ft981208_0033_0345G211570L.fits 
 7 -- ft981208_0033_0345G212670L.fits 
 8 -- ft981208_0033_0345G212970L.fits 
 9 -- ft981208_0033_0345G213570L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 191 events ft981208_0033_0345G200570M.fits ft981208_0033_0345G201970M.fits ft981208_0033_0345G211870M.fits ft981208_0033_0345G213270M.fits ft981208_0033_0345G213870M.fits
-> Ignoring the following files containing 134 events ft981208_0033_0345G201070L.fits ft981208_0033_0345G213470L.fits
-> Ignoring the following files containing 130 events ft981208_0033_0345G213070M.fits
-> Ignoring the following files containing 116 events ft981208_0033_0345G204170L.fits
-> Ignoring the following files containing 84 events ft981208_0033_0345G201770M.fits
-> Ignoring the following files containing 75 events ft981208_0033_0345G201870M.fits
-> Ignoring the following files containing 73 events ft981208_0033_0345G200370M.fits
-> Ignoring the following files containing 64 events ft981208_0033_0345G213170M.fits
-> Ignoring the following files containing 42 events ft981208_0033_0345G200470M.fits
-> Ignoring the following files containing 31 events ft981208_0033_0345G213670M.fits
-> Ignoring the following files containing 28 events ft981208_0033_0345G213770M.fits
-> Ignoring the following files containing 23 events ft981208_0033_0345G211770M.fits
-> Ignoring the following files containing 21 events ft981208_0033_0345G211670M.fits
-> Ignoring the following files containing 14 events ft981208_0033_0345G203370H.fits ft981208_0033_0345G204870H.fits ft981208_0033_0345G206070H.fits ft981208_0033_0345G206870H.fits ft981208_0033_0345G209470H.fits
-> Ignoring the following files containing 11 events ft981208_0033_0345G200870M.fits
-> Ignoring the following files containing 11 events ft981208_0033_0345G203470H.fits ft981208_0033_0345G206170H.fits ft981208_0033_0345G206970H.fits ft981208_0033_0345G208770H.fits ft981208_0033_0345G209570H.fits
-> Ignoring the following files containing 10 events ft981208_0033_0345G212470M.fits
-> Ignoring the following files containing 9 events ft981208_0033_0345G207770H.fits ft981208_0033_0345G210270H.fits
-> Ignoring the following files containing 5 events ft981208_0033_0345G207670H.fits ft981208_0033_0345G210170H.fits
-> Ignoring the following files containing 4 events ft981208_0033_0345G203670H.fits
-> Ignoring the following files containing 3 events ft981208_0033_0345G204770H.fits ft981208_0033_0345G205970H.fits ft981208_0033_0345G211170H.fits
-> Ignoring the following files containing 3 events ft981208_0033_0345G207870H.fits
-> Ignoring the following files containing 2 events ft981208_0033_0345G208070H.fits ft981208_0033_0345G210770H.fits
-> Ignoring the following files containing 1 events ft981208_0033_0345G212070M.fits
-> Grouping g3 event files
-> stdout output from group_event_files

1 ft981208_0033_0345G301370H.fits 60947
1 ft981208_0033_0345G302170H.fits 60947
1 ft981208_0033_0345G302370H.fits 60947
1 ft981208_0033_0345G303370H.fits 60947
1 ft981208_0033_0345G303570H.fits 60947
1 ft981208_0033_0345G304670H.fits 60947
1 ft981208_0033_0345G305870H.fits 60947
1 ft981208_0033_0345G305970H.fits 60947
1 ft981208_0033_0345G306770H.fits 60947
1 ft981208_0033_0345G306870H.fits 60947
1 ft981208_0033_0345G307670H.fits 60947
1 ft981208_0033_0345G308570H.fits 60947
1 ft981208_0033_0345G309370H.fits 60947
1 ft981208_0033_0345G310170H.fits 60947
1 ft981208_0033_0345G310270H.fits 60947
1 ft981208_0033_0345G310470H.fits 60947
1 ft981208_0033_0345G311270H.fits 60947
1 ft981208_0033_0345G312670H.fits 60947
2 ft981208_0033_0345G300170M.fits 31609
2 ft981208_0033_0345G300670M.fits 31609
2 ft981208_0033_0345G300970M.fits 31609
2 ft981208_0033_0345G301270M.fits 31609
2 ft981208_0033_0345G301570M.fits 31609
2 ft981208_0033_0345G302070M.fits 31609
2 ft981208_0033_0345G302270M.fits 31609
2 ft981208_0033_0345G302470M.fits 31609
2 ft981208_0033_0345G303470M.fits 31609
2 ft981208_0033_0345G304770M.fits 31609
2 ft981208_0033_0345G310370M.fits 31609
2 ft981208_0033_0345G311770M.fits 31609
2 ft981208_0033_0345G312370M.fits 31609
2 ft981208_0033_0345G312570M.fits 31609
2 ft981208_0033_0345G313170M.fits 31609
2 ft981208_0033_0345G313770M.fits 31609
3 ft981208_0033_0345G300270L.fits 29341
3 ft981208_0033_0345G301170L.fits 29341
3 ft981208_0033_0345G301470L.fits 29341
3 ft981208_0033_0345G301670L.fits 29341
3 ft981208_0033_0345G303670L.fits 29341
3 ft981208_0033_0345G311370L.fits 29341
3 ft981208_0033_0345G312470L.fits 29341
3 ft981208_0033_0345G312770L.fits 29341
3 ft981208_0033_0345G313370L.fits 29341
4 ft981208_0033_0345G300570M.fits 179
4 ft981208_0033_0345G301970M.fits 179
4 ft981208_0033_0345G311670M.fits 179
4 ft981208_0033_0345G313070M.fits 179
4 ft981208_0033_0345G313670M.fits 179
5 ft981208_0033_0345G312870M.fits 138
6 ft981208_0033_0345G301070L.fits 124
6 ft981208_0033_0345G313270L.fits 124
7 ft981208_0033_0345G303770L.fits 116
8 ft981208_0033_0345G301870M.fits 99
9 ft981208_0033_0345G301770M.fits 98
10 ft981208_0033_0345G300370M.fits 85
11 ft981208_0033_0345G312970M.fits 64
12 ft981208_0033_0345G300470M.fits 40
13 ft981208_0033_0345G313570M.fits 24
14 ft981208_0033_0345G313470M.fits 19
15 ft981208_0033_0345G311470M.fits 18
16 ft981208_0033_0345G303270H.fits 15
16 ft981208_0033_0345G304570H.fits 15
16 ft981208_0033_0345G305770H.fits 15
16 ft981208_0033_0345G306670H.fits 15
16 ft981208_0033_0345G308470H.fits 15
16 ft981208_0033_0345G309270H.fits 15
17 ft981208_0033_0345G311570M.fits 13
18 ft981208_0033_0345G303170H.fits 11
18 ft981208_0033_0345G304470H.fits 11
18 ft981208_0033_0345G305670H.fits 11
18 ft981208_0033_0345G308370H.fits 11
18 ft981208_0033_0345G309170H.fits 11
19 ft981208_0033_0345G300870M.fits 10
20 ft981208_0033_0345G305570H.fits 8
20 ft981208_0033_0345G308270H.fits 8
20 ft981208_0033_0345G309070H.fits 8
20 ft981208_0033_0345G310970H.fits 8
21 ft981208_0033_0345G306970H.fits 8
21 ft981208_0033_0345G309570H.fits 8
22 ft981208_0033_0345G312270M.fits 5
23 ft981208_0033_0345G307770H.fits 2
23 ft981208_0033_0345G308670H.fits 2
24 ft981208_0033_0345G311870M.fits 2
25 ft981208_0033_0345G307070H.fits 1
26 ft981208_0033_0345G307570H.fits 1
27 ft981208_0033_0345G309470H.fits 1
28 ft981208_0033_0345G309670H.fits 1
29 ft981208_0033_0345G310070H.fits 1

-> Creating ad76025000g300170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  18  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 18 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345G301370H.fits 
 2 -- ft981208_0033_0345G302170H.fits 
 3 -- ft981208_0033_0345G302370H.fits 
 4 -- ft981208_0033_0345G303370H.fits 
 5 -- ft981208_0033_0345G303570H.fits 
 6 -- ft981208_0033_0345G304670H.fits 
 7 -- ft981208_0033_0345G305870H.fits 
 8 -- ft981208_0033_0345G305970H.fits 
 9 -- ft981208_0033_0345G306770H.fits 
 10 -- ft981208_0033_0345G306870H.fits 
 11 -- ft981208_0033_0345G307670H.fits 
 12 -- ft981208_0033_0345G308570H.fits 
 13 -- ft981208_0033_0345G309370H.fits 
 14 -- ft981208_0033_0345G310170H.fits 
 15 -- ft981208_0033_0345G310270H.fits 
 16 -- ft981208_0033_0345G310470H.fits 
 17 -- ft981208_0033_0345G311270H.fits 
 18 -- ft981208_0033_0345G312670H.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345G301370H.fits 
 2 -- ft981208_0033_0345G302170H.fits 
 3 -- ft981208_0033_0345G302370H.fits 
 4 -- ft981208_0033_0345G303370H.fits 
 5 -- ft981208_0033_0345G303570H.fits 
 6 -- ft981208_0033_0345G304670H.fits 
 7 -- ft981208_0033_0345G305870H.fits 
 8 -- ft981208_0033_0345G305970H.fits 
 9 -- ft981208_0033_0345G306770H.fits 
 10 -- ft981208_0033_0345G306870H.fits 
 11 -- ft981208_0033_0345G307670H.fits 
 12 -- ft981208_0033_0345G308570H.fits 
 13 -- ft981208_0033_0345G309370H.fits 
 14 -- ft981208_0033_0345G310170H.fits 
 15 -- ft981208_0033_0345G310270H.fits 
 16 -- ft981208_0033_0345G310470H.fits 
 17 -- ft981208_0033_0345G311270H.fits 
 18 -- ft981208_0033_0345G312670H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000g300270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  16  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 16 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345G300170M.fits 
 2 -- ft981208_0033_0345G300670M.fits 
 3 -- ft981208_0033_0345G300970M.fits 
 4 -- ft981208_0033_0345G301270M.fits 
 5 -- ft981208_0033_0345G301570M.fits 
 6 -- ft981208_0033_0345G302070M.fits 
 7 -- ft981208_0033_0345G302270M.fits 
 8 -- ft981208_0033_0345G302470M.fits 
 9 -- ft981208_0033_0345G303470M.fits 
 10 -- ft981208_0033_0345G304770M.fits 
 11 -- ft981208_0033_0345G310370M.fits 
 12 -- ft981208_0033_0345G311770M.fits 
 13 -- ft981208_0033_0345G312370M.fits 
 14 -- ft981208_0033_0345G312570M.fits 
 15 -- ft981208_0033_0345G313170M.fits 
 16 -- ft981208_0033_0345G313770M.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345G300170M.fits 
 2 -- ft981208_0033_0345G300670M.fits 
 3 -- ft981208_0033_0345G300970M.fits 
 4 -- ft981208_0033_0345G301270M.fits 
 5 -- ft981208_0033_0345G301570M.fits 
 6 -- ft981208_0033_0345G302070M.fits 
 7 -- ft981208_0033_0345G302270M.fits 
 8 -- ft981208_0033_0345G302470M.fits 
 9 -- ft981208_0033_0345G303470M.fits 
 10 -- ft981208_0033_0345G304770M.fits 
 11 -- ft981208_0033_0345G310370M.fits 
 12 -- ft981208_0033_0345G311770M.fits 
 13 -- ft981208_0033_0345G312370M.fits 
 14 -- ft981208_0033_0345G312570M.fits 
 15 -- ft981208_0033_0345G313170M.fits 
 16 -- ft981208_0033_0345G313770M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad76025000g300370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft981208_0033_0345G300270L.fits 
 2 -- ft981208_0033_0345G301170L.fits 
 3 -- ft981208_0033_0345G301470L.fits 
 4 -- ft981208_0033_0345G301670L.fits 
 5 -- ft981208_0033_0345G303670L.fits 
 6 -- ft981208_0033_0345G311370L.fits 
 7 -- ft981208_0033_0345G312470L.fits 
 8 -- ft981208_0033_0345G312770L.fits 
 9 -- ft981208_0033_0345G313370L.fits 
Merging binary extension #: 2 
 1 -- ft981208_0033_0345G300270L.fits 
 2 -- ft981208_0033_0345G301170L.fits 
 3 -- ft981208_0033_0345G301470L.fits 
 4 -- ft981208_0033_0345G301670L.fits 
 5 -- ft981208_0033_0345G303670L.fits 
 6 -- ft981208_0033_0345G311370L.fits 
 7 -- ft981208_0033_0345G312470L.fits 
 8 -- ft981208_0033_0345G312770L.fits 
 9 -- ft981208_0033_0345G313370L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 179 events ft981208_0033_0345G300570M.fits ft981208_0033_0345G301970M.fits ft981208_0033_0345G311670M.fits ft981208_0033_0345G313070M.fits ft981208_0033_0345G313670M.fits
-> Ignoring the following files containing 138 events ft981208_0033_0345G312870M.fits
-> Ignoring the following files containing 124 events ft981208_0033_0345G301070L.fits ft981208_0033_0345G313270L.fits
-> Ignoring the following files containing 116 events ft981208_0033_0345G303770L.fits
-> Ignoring the following files containing 99 events ft981208_0033_0345G301870M.fits
-> Ignoring the following files containing 98 events ft981208_0033_0345G301770M.fits
-> Ignoring the following files containing 85 events ft981208_0033_0345G300370M.fits
-> Ignoring the following files containing 64 events ft981208_0033_0345G312970M.fits
-> Ignoring the following files containing 40 events ft981208_0033_0345G300470M.fits
-> Ignoring the following files containing 24 events ft981208_0033_0345G313570M.fits
-> Ignoring the following files containing 19 events ft981208_0033_0345G313470M.fits
-> Ignoring the following files containing 18 events ft981208_0033_0345G311470M.fits
-> Ignoring the following files containing 15 events ft981208_0033_0345G303270H.fits ft981208_0033_0345G304570H.fits ft981208_0033_0345G305770H.fits ft981208_0033_0345G306670H.fits ft981208_0033_0345G308470H.fits ft981208_0033_0345G309270H.fits
-> Ignoring the following files containing 13 events ft981208_0033_0345G311570M.fits
-> Ignoring the following files containing 11 events ft981208_0033_0345G303170H.fits ft981208_0033_0345G304470H.fits ft981208_0033_0345G305670H.fits ft981208_0033_0345G308370H.fits ft981208_0033_0345G309170H.fits
-> Ignoring the following files containing 10 events ft981208_0033_0345G300870M.fits
-> Ignoring the following files containing 8 events ft981208_0033_0345G305570H.fits ft981208_0033_0345G308270H.fits ft981208_0033_0345G309070H.fits ft981208_0033_0345G310970H.fits
-> Ignoring the following files containing 8 events ft981208_0033_0345G306970H.fits ft981208_0033_0345G309570H.fits
-> Ignoring the following files containing 5 events ft981208_0033_0345G312270M.fits
-> Ignoring the following files containing 2 events ft981208_0033_0345G307770H.fits ft981208_0033_0345G308670H.fits
-> Ignoring the following files containing 2 events ft981208_0033_0345G311870M.fits
-> Ignoring the following files containing 1 events ft981208_0033_0345G307070H.fits
-> Ignoring the following files containing 1 events ft981208_0033_0345G307570H.fits
-> Ignoring the following files containing 1 events ft981208_0033_0345G309470H.fits
-> Ignoring the following files containing 1 events ft981208_0033_0345G309670H.fits
-> Ignoring the following files containing 1 events ft981208_0033_0345G310070H.fits
-> stdout output from tar

a ft981208_0033_0345G200370M.fits 31K
a ft981208_0033_0345G200470M.fits 31K
a ft981208_0033_0345G200570M.fits 31K
a ft981208_0033_0345G200870M.fits 31K
a ft981208_0033_0345G201070L.fits 31K
a ft981208_0033_0345G201770M.fits 31K
a ft981208_0033_0345G201870M.fits 31K
a ft981208_0033_0345G201970M.fits 31K
a ft981208_0033_0345G203370H.fits 31K
a ft981208_0033_0345G203470H.fits 31K
a ft981208_0033_0345G203670H.fits 31K
a ft981208_0033_0345G204170L.fits 34K
a ft981208_0033_0345G204770H.fits 31K
a ft981208_0033_0345G204870H.fits 31K
a ft981208_0033_0345G205970H.fits 31K
a ft981208_0033_0345G206070H.fits 31K
a ft981208_0033_0345G206170H.fits 31K
a ft981208_0033_0345G206870H.fits 31K
a ft981208_0033_0345G206970H.fits 31K
a ft981208_0033_0345G207670H.fits 31K
a ft981208_0033_0345G207770H.fits 31K
a ft981208_0033_0345G207870H.fits 31K
a ft981208_0033_0345G208070H.fits 31K
a ft981208_0033_0345G208770H.fits 31K
a ft981208_0033_0345G209470H.fits 31K
a ft981208_0033_0345G209570H.fits 31K
a ft981208_0033_0345G210170H.fits 31K
a ft981208_0033_0345G210270H.fits 31K
a ft981208_0033_0345G210770H.fits 31K
a ft981208_0033_0345G211170H.fits 31K
a ft981208_0033_0345G211670M.fits 31K
a ft981208_0033_0345G211770M.fits 31K
a ft981208_0033_0345G211870M.fits 31K
a ft981208_0033_0345G212070M.fits 31K
a ft981208_0033_0345G212470M.fits 31K
a ft981208_0033_0345G213070M.fits 34K
a ft981208_0033_0345G213170M.fits 31K
a ft981208_0033_0345G213270M.fits 31K
a ft981208_0033_0345G213470L.fits 31K
a ft981208_0033_0345G213670M.fits 31K
a ft981208_0033_0345G213770M.fits 31K
a ft981208_0033_0345G213870M.fits 31K
a ft981208_0033_0345G300370M.fits 31K
a ft981208_0033_0345G300470M.fits 31K
a ft981208_0033_0345G300570M.fits 31K
a ft981208_0033_0345G300870M.fits 31K
a ft981208_0033_0345G301070L.fits 31K
a ft981208_0033_0345G301770M.fits 34K
a ft981208_0033_0345G301870M.fits 34K
a ft981208_0033_0345G301970M.fits 34K
a ft981208_0033_0345G303170H.fits 31K
a ft981208_0033_0345G303270H.fits 31K
a ft981208_0033_0345G303770L.fits 34K
a ft981208_0033_0345G304470H.fits 31K
a ft981208_0033_0345G304570H.fits 31K
a ft981208_0033_0345G305570H.fits 31K
a ft981208_0033_0345G305670H.fits 31K
a ft981208_0033_0345G305770H.fits 31K
a ft981208_0033_0345G306670H.fits 31K
a ft981208_0033_0345G306970H.fits 31K
a ft981208_0033_0345G307070H.fits 31K
a ft981208_0033_0345G307570H.fits 31K
a ft981208_0033_0345G307770H.fits 31K
a ft981208_0033_0345G308270H.fits 31K
a ft981208_0033_0345G308370H.fits 31K
a ft981208_0033_0345G308470H.fits 31K
a ft981208_0033_0345G308670H.fits 31K
a ft981208_0033_0345G309070H.fits 31K
a ft981208_0033_0345G309170H.fits 31K
a ft981208_0033_0345G309270H.fits 31K
a ft981208_0033_0345G309470H.fits 31K
a ft981208_0033_0345G309570H.fits 31K
a ft981208_0033_0345G309670H.fits 31K
a ft981208_0033_0345G310070H.fits 31K
a ft981208_0033_0345G310970H.fits 31K
a ft981208_0033_0345G311470M.fits 31K
a ft981208_0033_0345G311570M.fits 31K
a ft981208_0033_0345G311670M.fits 31K
a ft981208_0033_0345G311870M.fits 31K
a ft981208_0033_0345G312270M.fits 31K
a ft981208_0033_0345G312870M.fits 34K
a ft981208_0033_0345G312970M.fits 31K
a ft981208_0033_0345G313070M.fits 31K
a ft981208_0033_0345G313270L.fits 31K
a ft981208_0033_0345G313470M.fits 31K
a ft981208_0033_0345G313570M.fits 31K
a ft981208_0033_0345G313670M.fits 31K
a ft981208_0033_0345S001601H.fits 34K
a ft981208_0033_0345S002401L.fits 29K
a ft981208_0033_0345S002901L.fits 29K
a ft981208_0033_0345S003601L.fits 29K
a ft981208_0033_0345S004001L.fits 29K
a ft981208_0033_0345S004401L.fits 29K
a ft981208_0033_0345S102101L.fits 29K
a ft981208_0033_0345S102601L.fits 29K
a ft981208_0033_0345S103101L.fits 29K
a ft981208_0033_0345S103501L.fits 29K
a ft981208_0033_0345S103901L.fits 29K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (2:11:56)

-> Split threshold for SIS0=40, and SIS1=40
-> Fetching faintdfe.tbl
-> Calculating DFE values for ad76025000s000101h.unf with zerodef=1
-> Converting ad76025000s000101h.unf to ad76025000s000112h.unf
-> Calculating DFE values for ad76025000s000101h.unf with zerodef=2
-> Converting ad76025000s000101h.unf to ad76025000s000102h.unf
-> Calculating DFE values for ad76025000s000201m.unf with zerodef=1
-> Converting ad76025000s000201m.unf to ad76025000s000212m.unf
-> Calculating DFE values for ad76025000s000201m.unf with zerodef=2
-> Converting ad76025000s000201m.unf to ad76025000s000202m.unf
-> Calculating DFE values for ad76025000s000301l.unf with zerodef=1
-> Converting ad76025000s000301l.unf to ad76025000s000312l.unf
-> Calculating DFE values for ad76025000s000301l.unf with zerodef=2
-> Converting ad76025000s000301l.unf to ad76025000s000302l.unf
-> Calculating DFE values for ad76025000s000401h.unf with zerodef=1
-> Converting ad76025000s000401h.unf to ad76025000s000412h.unf
-> Calculating DFE values for ad76025000s000401h.unf with zerodef=2
-> Converting ad76025000s000401h.unf to ad76025000s000402h.unf
-> Calculating DFE values for ad76025000s100101h.unf with zerodef=1
-> Converting ad76025000s100101h.unf to ad76025000s100112h.unf
-> Calculating DFE values for ad76025000s100101h.unf with zerodef=2
-> Converting ad76025000s100101h.unf to ad76025000s100102h.unf
-> Calculating DFE values for ad76025000s100201m.unf with zerodef=1
-> Converting ad76025000s100201m.unf to ad76025000s100212m.unf
-> Calculating DFE values for ad76025000s100201m.unf with zerodef=2
-> Converting ad76025000s100201m.unf to ad76025000s100202m.unf
-> Calculating DFE values for ad76025000s100301l.unf with zerodef=1
-> Converting ad76025000s100301l.unf to ad76025000s100312l.unf
-> Calculating DFE values for ad76025000s100301l.unf with zerodef=2
-> Converting ad76025000s100301l.unf to ad76025000s100302l.unf
-> Calculating DFE values for ad76025000s100401h.unf with zerodef=1
-> Converting ad76025000s100401h.unf to ad76025000s100412h.unf
-> Calculating DFE values for ad76025000s100401h.unf with zerodef=2
-> Converting ad76025000s100401h.unf to ad76025000s100402h.unf

Calibrating the unfiltered event files (2:23:17)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft981208_0033_0345.ghf
-> stdout output from temp2gain

temp2gain V4.6
leapsec FITS data was successfully read

'ft981208_0033.0345' is successfully opened
Data Start Time is 187230836.84 (19981208 003352)
Time Margin 2.0 sec included
Sync error detected in 5532 th SF
Sync error detected in 5534 th SF
Sync error detected in 5535 th SF
Sync error detected in 5536 th SF
Sync error detected in 5538 th SF
Sync error detected in 5544 th SF
Sync error detected in 5545 th SF
Sync error detected in 6458 th SF
Sync error detected in 6459 th SF
Sync error detected in 14052 th SF
Sync error detected in 18442 th SF
Sync error detected in 18443 th SF
Sync error detected in 18444 th SF
Sync error detected in 18447 th SF
Sync error detected in 18448 th SF
'ft981208_0033.0345' EOF detected, sf=20258
Data End Time is 187328744.54 (19981209 034540)
Gain History is written in ft981208_0033_0345.ghf

-> Generating attitude correction table ad76025000_003_bp4.txt
-> Extracting info from ft981208_0033_0345CMHK.fits
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad76025000g200170h.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad76025000g200170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000g200270m.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad76025000g200270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000g200370l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad76025000g200370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000g300170h.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad76025000g300170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000g300270m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad76025000g300270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000g300370l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad76025000g300370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000101h.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad76025000s000101h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000102h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000112h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000112h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000201m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000201m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000202m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000212m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000212m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000301l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000301l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000302l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000312l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000312l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s000401h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000401h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad76025000s000402h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000402h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad76025000s000412h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s000412h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad76025000s100101h.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100101h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100102h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100112h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100112h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100201m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100201m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100202m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100212m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100212m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100301l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100301l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100302l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100312l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100312l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    187264958.73270
 Detected gap > 15min in attitude file:    187270942.71473
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad76025000s100401h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100401h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad76025000s100402h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100402h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

-> Preparing to run ascalin on ad76025000s100412h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad76025000s100412h.unf
-> stdout output from ascalin

ASCALIN_V0.9v

Creating filter files (2:49:29)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.252 to working directory
-> Creating ft981208_0033_0345.mkf
-> stdout output from mkfilter2

 
leapsec FITS data was successfully read

S0-HK file: ft981208_0033_0345S0HK.fits

S1-HK file: ft981208_0033_0345S1HK.fits

G2-HK file: ft981208_0033_0345G2HK.fits

G3-HK file: ft981208_0033_0345G3HK.fits

Date and time are: 1998-12-08 00:32:38  mjd=51155.022672

Orbit file name is frf.orbit.252

Epoch of Orbital Elements: 1998-12-07 21:59:59

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa981208_0033.0345

output FITS File: ft981208_0033_0345.mkf

mkfilter2: Warning, faQparam error: time= 1.872307748359e+08 outside range of attitude file

           Euler angles undefined for this bin

mkfilter2: Warning, faQparam error: time= 1.872308068359e+08 outside range of attitude file

           Euler angles undefined for this bin

Total 3062 Data bins were processed.

-> Adding deadtime to ft981208_0033_0345.mkf
-> Adding ad76025000_s0.dfe to ft981208_0033_0345.mkf
-> Adding ad76025000_s1.dfe to ft981208_0033_0345.mkf
-> Plotting quantities from ft981208_0033_0345.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (3:45:56)

-> Skipping ad76025000s000101h.unf because of mode
-> Filtering ad76025000s000102h.unf into ad76025000s000102h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   14012.317
 The mean of the selected column is                  24.800560
 The standard deviation of the selected column is    41.442652
 The minimum of selected column is                   3.5595386
 The maximum of selected column is                   516.50153
 The number of points used in calculation is              565

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<149.1 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.34E+05    78797 0100
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          70129     37175              0     32954         0         0
 Writing events file
  37175 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         70129     37175              0     32954         0         0
   in  18596.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        37175
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              16       35672
 Flickering pixels iter, pixels & cnts :   1          17         348
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           33
 Number of (internal) image counts   :        37175
 Number of image cts rejected (N, %) :        3602096.89
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           33            0            0
 
 Image counts      :             0        37175            0            0
 Image cts rejected:             0        36020            0            0
 Image cts rej (%) :          0.00        96.89         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        37175            0            0
 Total cts rejected:             0        36020            0            0
 Total cts rej (%) :          0.00        96.89         0.00         0.00
 
 Number of clean counts accepted  :         1155
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           33
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad76025000s000102h.evt use_events=no
Wrote cleaned events file to ad76025000s000102h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad76025000s000112h.unf into ad76025000s000112h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   14012.317
 The mean of the selected column is                  24.800560
 The standard deviation of the selected column is    41.442652
 The minimum of selected column is                   3.5595386
 The maximum of selected column is                   516.50153
 The number of points used in calculation is              565

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<149.1 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.34E+05    79361 0100
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          70371     37276              0     33095         0         0
 Writing events file
  37276 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         70371     37276              0     33095         0         0
   in  18596.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        37276
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              16       35674
 Flickering pixels iter, pixels & cnts :   1          17         348
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           33
 Number of (internal) image counts   :        37276
 Number of image cts rejected (N, %) :        3602296.64
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           33            0            0
 
 Image counts      :             0        37276            0            0
 Image cts rejected:             0        36022            0            0
 Image cts rej (%) :          0.00        96.64         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        37276            0            0
 Total cts rejected:             0        36022            0            0
 Total cts rej (%) :          0.00        96.64         0.00         0.00
 
 Number of clean counts accepted  :         1254
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           33
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad76025000s000112h.evt use_events=no
Wrote cleaned events file to ad76025000s000112h.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Skipping ad76025000s000201m.unf because of mode
-> Filtering ad76025000s000202m.unf into ad76025000s000202m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8966.0478
 The mean of the selected column is                  21.449875
 The standard deviation of the selected column is    7.5727242
 The minimum of selected column is                   7.3750224
 The maximum of selected column is                   71.500214
 The number of points used in calculation is              418

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.1 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.28E+05    46474 0100
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          42981     21654              0     21327         0         0
 Writing events file
  21654 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         42981     21654              0     21327         0         0
   in  13488.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        21654
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              13       20670
 Flickering pixels iter, pixels & cnts :   1          11         210
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           24
 Number of (internal) image counts   :        21654
 Number of image cts rejected (N, %) :        2088096.43
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           24            0            0
 
 Image counts      :             0        21654            0            0
 Image cts rejected:             0        20880            0            0
 Image cts rej (%) :          0.00        96.43         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        21654            0            0
 Total cts rejected:             0        20880            0            0
 Total cts rej (%) :          0.00        96.43         0.00         0.00
 
 Number of clean counts accepted  :          774
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           24
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad76025000s000202m.evt use_events=no
Wrote cleaned events file to ad76025000s000202m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad76025000s000212m.unf into ad76025000s000212m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   8966.0478
 The mean of the selected column is                  21.449875
 The standard deviation of the selected column is    7.5727242
 The minimum of selected column is                   7.3750224
 The maximum of selected column is                   71.500214
 The number of points used in calculation is              418

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.1 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.28E+05    46844 0100
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000212m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          43121     21717              0     21404         0         0
 Writing events file
  21717 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         43121     21717              0     21404         0         0
   in  13488.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        21717
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              13       20674
 Flickering pixels iter, pixels & cnts :   1          11         210
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           24
 Number of (internal) image counts   :        21717
 Number of image cts rejected (N, %) :        2088496.16
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           24            0            0
 
 Image counts      :             0        21717            0            0
 Image cts rejected:             0        20884            0            0
 Image cts rej (%) :          0.00        96.16         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        21717            0            0
 Total cts rejected:             0        20884            0            0
 Total cts rej (%) :          0.00        96.16         0.00         0.00
 
 Number of clean counts accepted  :          833
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           24
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad76025000s000212m.evt use_events=no
Wrote cleaned events file to ad76025000s000212m.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Skipping ad76025000s000301l.unf because of mode
-> Filtering ad76025000s000302l.unf into ad76025000s000302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      LOW         1998-12-08  00:36:46    0.17E+05    10840 0100
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad76025000s000302l.evt use_events=no
Wrote cleaned events file to ad76025000s000302l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad76025000s000302l.evt since it contains 0 events
-> Filtering ad76025000s000312l.unf into ad76025000s000312l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     LOW         1998-12-08  00:36:46    0.17E+05    10903 0100
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad76025000s000312l.evt use_events=no
Wrote cleaned events file to ad76025000s000312l.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting ad76025000s000312l.evt since it contains 0 events
-> Skipping ad76025000s000401h.unf because of mode
-> Filtering ad76025000s000402h.unf into ad76025000s000402h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)&&(S0_PIXL2>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  16:22:28    0.17E+03     1489 0110
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000402h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000402h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS0-BRIGHT > Session saved, goodbye

-> Filtering ad76025000s000412h.unf into ad76025000s000412h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)&&(S0_PIXL2>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  16:22:28    0.17E+03     1540 0110
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000412h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s000412h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS0-BRIGHT2 > Session saved, goodbye

-> Skipping ad76025000s100101h.unf because of mode
-> Filtering ad76025000s100102h.unf into ad76025000s100102h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   23660.963
 The mean of the selected column is                  41.803821
 The standard deviation of the selected column is    66.165911
 The minimum of selected column is                   8.0921297
 The maximum of selected column is                   776.78357
 The number of points used in calculation is              566

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<240.3 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.34E+05   205412 0001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         176618     96137              0     80481         0         0
 Writing events file
  96137 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        176618     96137              0     80481         0         0
   in  18620.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        96137
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              40       92036
 Flickering pixels iter, pixels & cnts :   1          54        3073
 
 Number of pixels rejected           :           94
 Number of (internal) image counts   :        96137
 Number of image cts rejected (N, %) :        9510998.93
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           94
 
 Image counts      :             0            0            0        96137
 Image cts rejected:             0            0            0        95109
 Image cts rej (%) :          0.00         0.00         0.00        98.93
 
    filtering data...
 
 Total counts      :             0            0            0        96137
 Total cts rejected:             0            0            0        95109
 Total cts rej (%) :          0.00         0.00         0.00        98.93
 
 Number of clean counts accepted  :         1028
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           94
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad76025000s100102h.evt use_events=no
Wrote cleaned events file to ad76025000s100102h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad76025000s100112h.unf into ad76025000s100112h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   23660.963
 The mean of the selected column is                  41.803821
 The standard deviation of the selected column is    66.165911
 The minimum of selected column is                   8.0921297
 The maximum of selected column is                   776.78357
 The number of points used in calculation is              566

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<240.3 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.34E+05   206106 0001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         176980     96237              0     80743         0         0
 Writing events file
  96237 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        176980     96237              0     80743         0         0
   in  18620.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        96237
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              40       92061
 Flickering pixels iter, pixels & cnts :   1          54        3074
 
 Number of pixels rejected           :           94
 Number of (internal) image counts   :        96237
 Number of image cts rejected (N, %) :        9513598.85
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           94
 
 Image counts      :             0            0            0        96237
 Image cts rejected:             0            0            0        95135
 Image cts rej (%) :          0.00         0.00         0.00        98.85
 
    filtering data...
 
 Total counts      :             0            0            0        96237
 Total cts rejected:             0            0            0        95135
 Total cts rej (%) :          0.00         0.00         0.00        98.85
 
 Number of clean counts accepted  :         1102
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           94
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad76025000s100112h.evt use_events=no
Wrote cleaned events file to ad76025000s100112h.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Skipping ad76025000s100201m.unf because of mode
-> Filtering ad76025000s100202m.unf into ad76025000s100202m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5286.2763
 The mean of the selected column is                  29.698182
 The standard deviation of the selected column is    9.1801390
 The minimum of selected column is                   10.200037
 The maximum of selected column is                   63.062691
 The number of points used in calculation is              178

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>2.1 && S1_PIXL3<57.2 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.28E+05   110948 0001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          97216     20449              0     76767         0         0
 Writing events file
  20449 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         97216     20449              0     76767         0         0
   in  5791.7     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        20449
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              30       19606
 Flickering pixels iter, pixels & cnts :   1          28         488
 
 Number of pixels rejected           :           58
 Number of (internal) image counts   :        20449
 Number of image cts rejected (N, %) :        2009498.26
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           58
 
 Image counts      :             0            0            0        20449
 Image cts rejected:             0            0            0        20094
 Image cts rej (%) :          0.00         0.00         0.00        98.26
 
    filtering data...
 
 Total counts      :             0            0            0        20449
 Total cts rejected:             0            0            0        20094
 Total cts rej (%) :          0.00         0.00         0.00        98.26
 
 Number of clean counts accepted  :          355
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           58
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad76025000s100202m.evt use_events=no
Wrote cleaned events file to ad76025000s100202m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad76025000s100212m.unf into ad76025000s100212m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5286.2763
 The mean of the selected column is                  29.698182
 The standard deviation of the selected column is    9.1801390
 The minimum of selected column is                   10.200037
 The maximum of selected column is                   63.062691
 The number of points used in calculation is              178

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>2.1 && S1_PIXL3<57.2 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.28E+05   111243 0001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100212m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          97353     20472              0     76881         0         0
 Writing events file
  20472 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         97353     20472              0     76881         0         0
   in  5791.7     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        20472
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              30       19613
 Flickering pixels iter, pixels & cnts :   1          28         488
 
 Number of pixels rejected           :           58
 Number of (internal) image counts   :        20472
 Number of image cts rejected (N, %) :        2010198.19
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           58
 
 Image counts      :             0            0            0        20472
 Image cts rejected:             0            0            0        20101
 Image cts rej (%) :          0.00         0.00         0.00        98.19
 
    filtering data...
 
 Total counts      :             0            0            0        20472
 Total cts rejected:             0            0            0        20101
 Total cts rej (%) :          0.00         0.00         0.00        98.19
 
 Number of clean counts accepted  :          371
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           58
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad76025000s100212m.evt use_events=no
Wrote cleaned events file to ad76025000s100212m.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Skipping ad76025000s100301l.unf because of mode
-> Filtering ad76025000s100302l.unf into ad76025000s100302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      LOW         1998-12-08  00:36:46    0.17E+05    16400 0001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad76025000s100302l.evt use_events=no
Wrote cleaned events file to ad76025000s100302l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad76025000s100302l.evt since it contains 0 events
-> Filtering ad76025000s100312l.unf into ad76025000s100312l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     LOW         1998-12-08  00:36:46    0.17E+05    16432 0001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_76025000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data19/seq_proc/ad0_76025000.003/screen_in_event.xs
    reading data file: /data/data19/seq_proc/ad0_76025000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad76025000s100312l.evt use_events=no
Wrote cleaned events file to ad76025000s100312l.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting ad76025000s100312l.evt since it contains 0 events
-> Skipping ad76025000s100401h.unf because of mode
-> Filtering ad76025000s100402h.unf into ad76025000s100402h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  22:38:36    0.18E+03     9574 1001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100402h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100402h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS1-BRIGHT > Session saved, goodbye

-> Filtering ad76025000s100412h.unf into ad76025000s100412h.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&((T_DY_NT<0)||(T_DY_NT>32))
&&((T_SAA  <0)||(T_SAA  >32))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  22:38:36    0.18E+03     9907 1001
Processing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100412h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000s100412h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS1-BRIGHT2 > Session saved, goodbye

-> Filtering ad76025000g200170h.unf into ad76025000g200170h.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    62356     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          62356      5543          23592     33221         0         0
 Writing events file
   5543 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         62356      5543          23592     33221         0         0
   in  18986.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        5543                4760               783
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad76025000g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad76025000g200270m.unf into ad76025000g200270m.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    32644     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          32644      5329          14793     12522         0         0
 Writing events file
   5329 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         32644      5329          14793     12522         0         0
   in  17696.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        5329                4513               816
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad76025000g200270m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad76025000g200370l.unf into ad76025000g200370l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29435     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200370l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad76025000g200370l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad76025000g200370l.evt since it contains 0 events
-> Filtering ad76025000g300170h.unf into ad76025000g300170h.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    60947     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          60947      6182          19255     35510         0         0
 Writing events file
   6182 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60947      6182          19255     35510         0         0
   in  18982.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        6182                5198               984
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad76025000g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad76025000g300270m.unf into ad76025000g300270m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    31609     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          31609      5816          12162     13631         0         0
 Writing events file
   5816 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         31609      5816          12162     13631         0         0
   in  17696.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        5816                4786              1030
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad76025000g300270m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad76025000g300370l.unf into ad76025000g300370l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29341     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300370l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA > read events ad76025000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad76025000g300370l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad76025000g300370l.evt since it contains 0 events

Generating images and exposure maps (4:20:57)

-> Generating exposure map ad76025000g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)

-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad76025000g200170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1420
 Mean   RA/DEC/ROLL :      354.0365       2.0972     119.1420
 Pnt    RA/DEC/ROLL :      354.0414       2.0488     119.1420
 
 Image rebin factor :             1
 Attitude Records   :         80728
 GTI intervals      :            29
 Total GTI (secs)   :     18986.357
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       3188.95      3188.95
  20 Percent Complete: Total/live time:       4470.03      4470.03
  30 Percent Complete: Total/live time:       6390.03      6390.03
  40 Percent Complete: Total/live time:       8140.03      8140.03
  50 Percent Complete: Total/live time:      10024.18     10024.18
  60 Percent Complete: Total/live time:      12532.84     12532.84
  70 Percent Complete: Total/live time:      13768.14     13768.14
  80 Percent Complete: Total/live time:      16052.35     16052.35
  90 Percent Complete: Total/live time:      17642.62     17642.62
 100 Percent Complete: Total/live time:      18986.36     18986.36
 
 Number of attitude steps  used:           39
 Number of attitude steps avail:        50794
 Mean RA/DEC pixel offset:      -10.5716      -4.0592
 
    writing expo file: ad76025000g200170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000g200170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000g200170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     4760     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4760      4686             74         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4760      4686             74         0         0         0
   in  18986.     seconds
 Image            has     4686 counts for 0.2468     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4760      1986             74         0         0      2700
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4760      1986             74         0         0      2700
   in  18986.     seconds
 Image            has     1986 counts for 0.1046     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4760      2712             74         0         0      1974
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4760      2712             74         0         0      1974
   in  18986.     seconds
 Image            has     2712 counts for 0.1428     counts/sec
 Command not found; type ? for a command listing
!ad76025000g200170h:ASCA >
!ad76025000g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000g200170h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g200170h:ASCA > read events ad76025000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g200170h:ASCA-GIS2-PH > set image sky
!ad76025000g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad76025000g200170h:ASCA-GIS2-PH > extract image
!ad76025000g200170h:ASCA-GIS2-PH > save image outfile=ad76025000g200170_all.img
Wrote image to file ad76025000g200170_all.img
!ad76025000g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad76025000g200170h:ASCA-GIS2-PH > extract image
!ad76025000g200170h:ASCA-GIS2-PH > save image outfile=ad76025000g200170_lo.img
Wrote image to file ad76025000g200170_lo.img
!ad76025000g200170h:ASCA-GIS2-PH > clear pha_cut
!ad76025000g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad76025000g200170h:ASCA-GIS2-PH > extract image
!ad76025000g200170h:ASCA-GIS2-PH > save image outfile=ad76025000g200170_hi.img
Wrote image to file ad76025000g200170_hi.img
!ad76025000g200170h:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad76025000g200270.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad76025000g200270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000g200270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1424
 Mean   RA/DEC/ROLL :      354.0373       2.0945     119.1424
 Pnt    RA/DEC/ROLL :      354.0711       2.0456     119.1424
 
 Image rebin factor :             1
 Attitude Records   :         80728
 GTI intervals      :            19
 Total GTI (secs)   :     17696.168
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       2060.00      2060.00
  20 Percent Complete: Total/live time:       3723.99      3723.99
  30 Percent Complete: Total/live time:       5871.94      5871.94
  40 Percent Complete: Total/live time:       7355.94      7355.94
  50 Percent Complete: Total/live time:      10007.92     10007.92
  60 Percent Complete: Total/live time:      14240.17     14240.17
  70 Percent Complete: Total/live time:      14240.17     14240.17
  80 Percent Complete: Total/live time:      14787.89     14787.89
  90 Percent Complete: Total/live time:      16639.88     16639.88
 100 Percent Complete: Total/live time:      17696.17     17696.17
 
 Number of attitude steps  used:           59
 Number of attitude steps avail:         9824
 Mean RA/DEC pixel offset:      -10.1399      -4.1119
 
    writing expo file: ad76025000g200270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000g200270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000g200270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4513     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4513      4441             72         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4513      4441             72         0         0         0
   in  17696.     seconds
 Image            has     4441 counts for 0.2510     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4513      1931             72         0         0      2510
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4513      1931             72         0         0      2510
   in  17696.     seconds
 Image            has     1931 counts for 0.1091     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4513      2520             72         0         0      1921
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4513      2520             72         0         0      1921
   in  17696.     seconds
 Image            has     2520 counts for 0.1424     counts/sec
 Command not found; type ? for a command listing
!ad76025000g200270m:ASCA >
!ad76025000g200270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000g200270m:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g200270m:ASCA > read events ad76025000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g200270m:ASCA-GIS2-PH > set image sky
!ad76025000g200270m:ASCA-GIS2-PH > filter region corner_point.reg
!ad76025000g200270m:ASCA-GIS2-PH > extract image
!ad76025000g200270m:ASCA-GIS2-PH > save image outfile=ad76025000g200270_all.img
Wrote image to file ad76025000g200270_all.img
!ad76025000g200270m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad76025000g200270m:ASCA-GIS2-PH > extract image
!ad76025000g200270m:ASCA-GIS2-PH > save image outfile=ad76025000g200270_lo.img
Wrote image to file ad76025000g200270_lo.img
!ad76025000g200270m:ASCA-GIS2-PH > clear pha_cut
!ad76025000g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad76025000g200270m:ASCA-GIS2-PH > extract image
!ad76025000g200270m:ASCA-GIS2-PH > save image outfile=ad76025000g200270_hi.img
Wrote image to file ad76025000g200270_hi.img
!ad76025000g200270m:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad76025000g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)

-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad76025000g300170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1424
 Mean   RA/DEC/ROLL :      354.0464       2.0744     119.1424
 Pnt    RA/DEC/ROLL :      354.0316       2.0716     119.1424
 
 Image rebin factor :             1
 Attitude Records   :         80728
 GTI intervals      :            28
 Total GTI (secs)   :     18982.357
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       3188.95      3188.95
  20 Percent Complete: Total/live time:       4470.03      4470.03
  30 Percent Complete: Total/live time:       6390.03      6390.03
  40 Percent Complete: Total/live time:       8144.03      8144.03
  50 Percent Complete: Total/live time:       9687.02      9687.02
  60 Percent Complete: Total/live time:      12534.84     12534.84
  70 Percent Complete: Total/live time:      13768.14     13768.14
  80 Percent Complete: Total/live time:      16050.35     16050.35
  90 Percent Complete: Total/live time:      17638.62     17638.62
 100 Percent Complete: Total/live time:      18982.36     18982.36
 
 Number of attitude steps  used:           39
 Number of attitude steps avail:        50782
 Mean RA/DEC pixel offset:        1.1974      -2.8901
 
    writing expo file: ad76025000g300170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000g300170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000g300170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     5198     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5198      5120             78         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5198      5120             78         0         0         0
   in  18982.     seconds
 Image            has     5120 counts for 0.2697     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5198      2281             78         0         0      2839
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5198      2281             78         0         0      2839
   in  18982.     seconds
 Image            has     2281 counts for 0.1202     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5198      2848             78         0         0      2272
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5198      2848             78         0         0      2272
   in  18982.     seconds
 Image            has     2848 counts for 0.1500     counts/sec
 Command not found; type ? for a command listing
!ad76025000g300170h:ASCA >
!ad76025000g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000g300170h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g300170h:ASCA > read events ad76025000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g300170h:ASCA-GIS3-PH > set image sky
!ad76025000g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad76025000g300170h:ASCA-GIS3-PH > extract image
!ad76025000g300170h:ASCA-GIS3-PH > save image outfile=ad76025000g300170_all.img
Wrote image to file ad76025000g300170_all.img
!ad76025000g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad76025000g300170h:ASCA-GIS3-PH > extract image
!ad76025000g300170h:ASCA-GIS3-PH > save image outfile=ad76025000g300170_lo.img
Wrote image to file ad76025000g300170_lo.img
!ad76025000g300170h:ASCA-GIS3-PH > clear pha_cut
!ad76025000g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad76025000g300170h:ASCA-GIS3-PH > extract image
!ad76025000g300170h:ASCA-GIS3-PH > save image outfile=ad76025000g300170_hi.img
Wrote image to file ad76025000g300170_hi.img
!ad76025000g300170h:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad76025000g300270.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad76025000g300270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000g300270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1428
 Mean   RA/DEC/ROLL :      354.0472       2.0718     119.1428
 Pnt    RA/DEC/ROLL :      354.0612       2.0683     119.1428
 
 Image rebin factor :             1
 Attitude Records   :         80728
 GTI intervals      :            19
 Total GTI (secs)   :     17696.168
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       2060.00      2060.00
  20 Percent Complete: Total/live time:       3723.99      3723.99
  30 Percent Complete: Total/live time:       5871.94      5871.94
  40 Percent Complete: Total/live time:       7355.94      7355.94
  50 Percent Complete: Total/live time:      10007.92     10007.92
  60 Percent Complete: Total/live time:      14240.17     14240.17
  70 Percent Complete: Total/live time:      14240.17     14240.17
  80 Percent Complete: Total/live time:      14787.89     14787.89
  90 Percent Complete: Total/live time:      16639.88     16639.88
 100 Percent Complete: Total/live time:      17696.17     17696.17
 
 Number of attitude steps  used:           59
 Number of attitude steps avail:         9824
 Mean RA/DEC pixel offset:        1.7340      -2.9323
 
    writing expo file: ad76025000g300270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000g300270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000g300270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4786     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4786      4701             85         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4786      4701             85         0         0         0
   in  17696.     seconds
 Image            has     4701 counts for 0.2657     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4786      2146             85         0         0      2555
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4786      2146             85         0         0      2555
   in  17696.     seconds
 Image            has     2146 counts for 0.1213     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4786      2567             85         0         0      2134
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4786      2567             85         0         0      2134
   in  17696.     seconds
 Image            has     2567 counts for 0.1451     counts/sec
 Command not found; type ? for a command listing
!ad76025000g300270m:ASCA >
!ad76025000g300270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000g300270m:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g300270m:ASCA > read events ad76025000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000g300270m:ASCA-GIS3-PH > set image sky
!ad76025000g300270m:ASCA-GIS3-PH > filter region corner_point.reg
!ad76025000g300270m:ASCA-GIS3-PH > extract image
!ad76025000g300270m:ASCA-GIS3-PH > save image outfile=ad76025000g300270_all.img
Wrote image to file ad76025000g300270_all.img
!ad76025000g300270m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad76025000g300270m:ASCA-GIS3-PH > extract image
!ad76025000g300270m:ASCA-GIS3-PH > save image outfile=ad76025000g300270_lo.img
Wrote image to file ad76025000g300270_lo.img
!ad76025000g300270m:ASCA-GIS3-PH > clear pha_cut
!ad76025000g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad76025000g300270m:ASCA-GIS3-PH > extract image
!ad76025000g300270m:ASCA-GIS3-PH > save image outfile=ad76025000g300270_hi.img
Wrote image to file ad76025000g300270_hi.img
!ad76025000g300270m:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad76025000s000102.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad76025000s000102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000s000102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1427
 Mean   RA/DEC/ROLL :      354.0547       2.0924     119.1427
 Pnt    RA/DEC/ROLL :      354.0230       2.0532     119.1427
 
 Image rebin factor :             4
 Attitude Records   :         80728
 Hot Pixels         :            33
 GTI intervals      :            28
 Total GTI (secs)   :     18595.770
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       3127.92      3127.92
  20 Percent Complete: Total/live time:       5108.90      5108.90
  30 Percent Complete: Total/live time:       5788.39      5788.39
  40 Percent Complete: Total/live time:       7806.11      7806.11
  50 Percent Complete: Total/live time:       9889.09      9889.09
  60 Percent Complete: Total/live time:      12192.07     12192.07
  70 Percent Complete: Total/live time:      14118.56     14118.56
  80 Percent Complete: Total/live time:      15719.77     15719.77
  90 Percent Complete: Total/live time:      17284.03     17284.03
 100 Percent Complete: Total/live time:      18595.77     18595.77
 
 Number of attitude steps  used:           43
 Number of attitude steps avail:        51100
 Mean RA/DEC pixel offset:      -42.2919     -99.8910
 
    writing expo file: ad76025000s000102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000s000102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000s000102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155      1155              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1155      1155              0         0         0         0
   in  18596.     seconds
 Image            has     1155 counts for 6.2111E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       621              0         0         0       534
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1155       621              0         0         0       534
   in  18596.     seconds
 Image            has      621 counts for 3.3395E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       536              0         0         0       619
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1155       536              0         0         0       619
   in  18596.     seconds
 Image            has      536 counts for 2.8824E-02 counts/sec
 Command not found; type ? for a command listing
!ad76025000s000102h:ASCA >
!ad76025000s000102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000s000102h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s000102h:ASCA > read events ad76025000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad76025000s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad76025000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad76025000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad76025000s000102_all.img
Wrote image to file ad76025000s000102_all.img
!ad76025000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad76025000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad76025000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad76025000s000102_lo.img
Wrote image to file ad76025000s000102_lo.img
!ad76025000s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad76025000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad76025000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad76025000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad76025000s000102_hi.img
Wrote image to file ad76025000s000102_hi.img
!ad76025000s000102h:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad76025000s000202.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad76025000s000202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000s000202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1432
 Mean   RA/DEC/ROLL :      354.0544       2.0910     119.1432
 Pnt    RA/DEC/ROLL :      354.0528       2.0495     119.1432
 
 Image rebin factor :             4
 Attitude Records   :         80728
 Hot Pixels         :            24
 GTI intervals      :            72
 Total GTI (secs)   :     13487.621
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1591.99      1591.99
  20 Percent Complete: Total/live time:       3584.00      3584.00
  30 Percent Complete: Total/live time:       5123.95      5123.95
  40 Percent Complete: Total/live time:       5591.95      5591.95
  50 Percent Complete: Total/live time:       7503.75      7503.75
  60 Percent Complete: Total/live time:       9551.62      9551.62
  70 Percent Complete: Total/live time:      10675.35     10675.35
  80 Percent Complete: Total/live time:      11035.34     11035.34
  90 Percent Complete: Total/live time:      12591.33     12591.33
 100 Percent Complete: Total/live time:      13487.62     13487.62
 
 Number of attitude steps  used:           42
 Number of attitude steps avail:         6749
 Mean RA/DEC pixel offset:      -39.2203     -94.7327
 
    writing expo file: ad76025000s000202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000s000202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.13E+05      774 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       774              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           774       774              0         0         0         0
   in  13488.     seconds
 Image            has      774 counts for 5.7386E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       439              0         0         0       335
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           774       439              0         0         0       335
   in  13488.     seconds
 Image            has      439 counts for 3.2548E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       335              0         0         0       439
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           774       335              0         0         0       439
   in  13488.     seconds
 Image            has      335 counts for 2.4838E-02 counts/sec
 Command not found; type ? for a command listing
!ad76025000s000202m:ASCA >
!ad76025000s000202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000s000202m:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s000202m:ASCA > read events ad76025000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s000202m:ASCA-SIS0-BRIGHT > set image sky
!ad76025000s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad76025000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad76025000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad76025000s000202_all.img
Wrote image to file ad76025000s000202_all.img
!ad76025000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad76025000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad76025000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad76025000s000202_lo.img
Wrote image to file ad76025000s000202_lo.img
!ad76025000s000202m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad76025000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad76025000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad76025000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad76025000s000202_hi.img
Wrote image to file ad76025000s000202_hi.img
!ad76025000s000202m:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad76025000s100102.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad76025000s100102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000s100102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1422
 Mean   RA/DEC/ROLL :      354.0403       2.0856     119.1422
 Pnt    RA/DEC/ROLL :      354.0374       2.0601     119.1422
 
 Image rebin factor :             4
 Attitude Records   :         80728
 Hot Pixels         :            94
 GTI intervals      :            26
 Total GTI (secs)   :     18619.758
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       3143.91      3143.91
  20 Percent Complete: Total/live time:       5124.90      5124.90
  30 Percent Complete: Total/live time:       5804.38      5804.38
  40 Percent Complete: Total/live time:       7822.11      7822.11
  50 Percent Complete: Total/live time:       9905.09      9905.09
  60 Percent Complete: Total/live time:      12204.07     12204.07
  70 Percent Complete: Total/live time:      14138.54     14138.54
  80 Percent Complete: Total/live time:      15739.76     15739.76
  90 Percent Complete: Total/live time:      17308.02     17308.02
 100 Percent Complete: Total/live time:      18619.76     18619.76
 
 Number of attitude steps  used:           43
 Number of attitude steps avail:        50901
 Mean RA/DEC pixel offset:      -46.6898     -29.5458
 
    writing expo file: ad76025000s100102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000s100102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000s100102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028      1028              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1028      1028              0         0         0         0
   in  18620.     seconds
 Image            has     1028 counts for 5.5210E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       508              0         0         0       520
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1028       508              0         0         0       520
   in  18620.     seconds
 Image            has      508 counts for 2.7283E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       520              0         0         0       508
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1028       520              0         0         0       508
   in  18620.     seconds
 Image            has      520 counts for 2.7927E-02 counts/sec
 Command not found; type ? for a command listing
!ad76025000s100102h:ASCA >
!ad76025000s100102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000s100102h:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s100102h:ASCA > read events ad76025000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad76025000s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad76025000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad76025000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad76025000s100102_all.img
Wrote image to file ad76025000s100102_all.img
!ad76025000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad76025000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad76025000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad76025000s100102_lo.img
Wrote image to file ad76025000s100102_lo.img
!ad76025000s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad76025000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad76025000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad76025000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad76025000s100102_hi.img
Wrote image to file ad76025000s100102_hi.img
!ad76025000s100102h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Generating exposure map ad76025000s100202.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad76025000s100202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad76025000s100202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa981208_0033.0345
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      354.0400       2.0722     119.1426
 Mean   RA/DEC/ROLL :      354.0400       2.0840     119.1426
 Pnt    RA/DEC/ROLL :      354.0671       2.0564     119.1426
 
 Image rebin factor :             4
 Attitude Records   :         80728
 Hot Pixels         :            58
 GTI intervals      :           105
 Total GTI (secs)   :      5791.655
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:        656.00       656.00
  20 Percent Complete: Total/live time:       1783.85      1783.85
  30 Percent Complete: Total/live time:       2007.85      2007.85
  40 Percent Complete: Total/live time:       2855.85      2855.85
  50 Percent Complete: Total/live time:       3047.85      3047.85
  60 Percent Complete: Total/live time:       4031.78      4031.78
  70 Percent Complete: Total/live time:       4223.66      4223.66
  80 Percent Complete: Total/live time:       4703.66      4703.66
  90 Percent Complete: Total/live time:       5407.66      5407.66
 100 Percent Complete: Total/live time:       5791.66      5791.66
 
 Number of attitude steps  used:           41
 Number of attitude steps avail:         8255
 Mean RA/DEC pixel offset:      -43.8654     -24.5827
 
    writing expo file: ad76025000s100202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad76025000s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad76025000s100202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.58E+04      355 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355       355              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           355       355              0         0         0         0
   in  5791.7     seconds
 Image            has      355 counts for 6.1295E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355       172              0         0         0       183
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           355       172              0         0         0       183
   in  5791.7     seconds
 Image            has      172 counts for 2.9698E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355       183              0         0         0       172
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           355       183              0         0         0       172
   in  5791.7     seconds
 Image            has      183 counts for 3.1597E-02 counts/sec
 Command not found; type ? for a command listing
!ad76025000s100202m:ASCA >
!ad76025000s100202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad76025000s100202m:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s100202m:ASCA > read events ad76025000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!ad76025000s100202m:ASCA-SIS1-BRIGHT > set image sky
!ad76025000s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad76025000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad76025000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad76025000s100202_all.img
Wrote image to file ad76025000s100202_all.img
!ad76025000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad76025000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad76025000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad76025000s100202_lo.img
Wrote image to file ad76025000s100202_lo.img
!ad76025000s100202m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad76025000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad76025000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad76025000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad76025000s100202_hi.img
Wrote image to file ad76025000s100202_hi.img
!ad76025000s100202m:ASCA-SIS1-BRIGHT > exit save_session=no

-> Summing sis images
-> Exposure for ad76025000s000102.expo is 18595.767578 seconds
-> Exposure for ad76025000s000202.expo is 13487.621094 seconds
-> Exposure for ad76025000s100102.expo is 18619.755859 seconds
-> Exposure for ad76025000s100202.expo is 5791.655273 seconds
-> Summing the following images to produce ad76025000sis32002.totexpo

ad76025000s000102.expo
ad76025000s000202.expo
ad76025000s100102.expo
ad76025000s100202.expo

-> Setting EXPOSURE=56494.799804 in ad76025000sis32002.totexpo
-> Exposure for ad76025000s000102_all.img is 1.859576866552234E+04 seconds
-> ad76025000s000102_all.img has 1155 counts
-> Exposure for ad76025000s000202_all.img is 1.348762036314607E+04 seconds
-> ad76025000s000202_all.img has 774 counts
-> Exposure for ad76025000s100102_all.img is 1.861975653812289E+04 seconds
-> ad76025000s100102_all.img has 1028 counts
-> Exposure for ad76025000s100202_all.img is 5.791655339479446E+03 seconds
-> ad76025000s100202_all.img has 355 counts
-> Summing the following images to produce ad76025000sis32002_all.totsky

ad76025000s000102_all.img
ad76025000s000202_all.img
ad76025000s100102_all.img
ad76025000s100202_all.img

-> Setting EXPOSURE=56494.8009062707 in ad76025000sis32002_all.totsky
-> Setting TOTCTS=3312 in ad76025000sis32002_all.totsky
-> Exposure for ad76025000s000102_lo.img is 1.859576866552234E+04 seconds
-> ad76025000s000102_lo.img has 621 counts
-> Exposure for ad76025000s000202_lo.img is 1.348762036314607E+04 seconds
-> ad76025000s000202_lo.img has 439 counts
-> Exposure for ad76025000s100102_lo.img is 1.861975653812289E+04 seconds
-> ad76025000s100102_lo.img has 508 counts
-> Exposure for ad76025000s100202_lo.img is 5.791655339479446E+03 seconds
-> ad76025000s100202_lo.img has 172 counts
-> Summing the following images to produce ad76025000sis32002_lo.totsky

ad76025000s000102_lo.img
ad76025000s000202_lo.img
ad76025000s100102_lo.img
ad76025000s100202_lo.img

-> Setting EXPOSURE=56494.8009062707 in ad76025000sis32002_lo.totsky
-> Setting TOTCTS=1740 in ad76025000sis32002_lo.totsky
-> Exposure for ad76025000s000102_hi.img is 1.859576866552234E+04 seconds
-> ad76025000s000102_hi.img has 536 counts
-> Exposure for ad76025000s000202_hi.img is 1.348762036314607E+04 seconds
-> ad76025000s000202_hi.img has 335 counts
-> Exposure for ad76025000s100102_hi.img is 1.861975653812289E+04 seconds
-> ad76025000s100102_hi.img has 520 counts
-> Exposure for ad76025000s100202_hi.img is 5.791655339479446E+03 seconds
-> ad76025000s100202_hi.img has 183 counts
-> Summing the following images to produce ad76025000sis32002_hi.totsky

ad76025000s000102_hi.img
ad76025000s000202_hi.img
ad76025000s100102_hi.img
ad76025000s100202_hi.img

-> Setting EXPOSURE=56494.8009062707 in ad76025000sis32002_hi.totsky
-> Setting TOTCTS=1574 in ad76025000sis32002_hi.totsky
-> Running XIMAGE to create ad76025000sis32002.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad76025000sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 12.000000
 Saving current map
![2]XIMAGE> read/expo ad76025000sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 941.58008
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     4.16667
  Min and max :   0  10
 Max-preserving scaling factor :     4.9999998
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     98.6624
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

-> Summing gis images
-> Exposure for ad76025000g200170.expo is 18986.355469 seconds
-> Exposure for ad76025000g200270.expo is 17696.167969 seconds
-> Exposure for ad76025000g300170.expo is 18982.355469 seconds
-> Exposure for ad76025000g300270.expo is 17696.167969 seconds
-> Summing the following images to produce ad76025000gis25670.totexpo

ad76025000g200170.expo
ad76025000g200270.expo
ad76025000g300170.expo
ad76025000g300270.expo

-> Setting EXPOSURE=73361.046876 in ad76025000gis25670.totexpo
-> Exposure for ad76025000g200170_all.img is 1.898635537520051E+04 seconds
-> ad76025000g200170_all.img has 4686 counts
-> Exposure for ad76025000g200270_all.img is 1.769616902956367E+04 seconds
-> ad76025000g200270_all.img has 4441 counts
-> Exposure for ad76025000g300170_all.img is 1.898235538113117E+04 seconds
-> ad76025000g300170_all.img has 5120 counts
-> Exposure for ad76025000g300270_all.img is 1.769616902956367E+04 seconds
-> ad76025000g300270_all.img has 4701 counts
-> Summing the following images to produce ad76025000gis25670_all.totsky

ad76025000g200170_all.img
ad76025000g200270_all.img
ad76025000g300170_all.img
ad76025000g300270_all.img

-> Setting EXPOSURE=73361.0488154591 in ad76025000gis25670_all.totsky
-> Setting TOTCTS=18948 in ad76025000gis25670_all.totsky
-> Exposure for ad76025000g200170_lo.img is 1.898635537520051E+04 seconds
-> ad76025000g200170_lo.img has 1986 counts
-> Exposure for ad76025000g200270_lo.img is 1.769616902956367E+04 seconds
-> ad76025000g200270_lo.img has 1931 counts
-> Exposure for ad76025000g300170_lo.img is 1.898235538113117E+04 seconds
-> ad76025000g300170_lo.img has 2281 counts
-> Exposure for ad76025000g300270_lo.img is 1.769616902956367E+04 seconds
-> ad76025000g300270_lo.img has 2146 counts
-> Summing the following images to produce ad76025000gis25670_lo.totsky

ad76025000g200170_lo.img
ad76025000g200270_lo.img
ad76025000g300170_lo.img
ad76025000g300270_lo.img

-> Setting EXPOSURE=73361.0488154591 in ad76025000gis25670_lo.totsky
-> Setting TOTCTS=8344 in ad76025000gis25670_lo.totsky
-> Exposure for ad76025000g200170_hi.img is 1.898635537520051E+04 seconds
-> ad76025000g200170_hi.img has 2712 counts
-> Exposure for ad76025000g200270_hi.img is 1.769616902956367E+04 seconds
-> ad76025000g200270_hi.img has 2520 counts
-> Exposure for ad76025000g300170_hi.img is 1.898235538113117E+04 seconds
-> ad76025000g300170_hi.img has 2848 counts
-> Exposure for ad76025000g300270_hi.img is 1.769616902956367E+04 seconds
-> ad76025000g300270_hi.img has 2567 counts
-> Summing the following images to produce ad76025000gis25670_hi.totsky

ad76025000g200170_hi.img
ad76025000g200270_hi.img
ad76025000g300170_hi.img
ad76025000g300270_hi.img

-> Setting EXPOSURE=73361.0488154591 in ad76025000gis25670_hi.totsky
-> Setting TOTCTS=10647 in ad76025000gis25670_hi.totsky
-> Running XIMAGE to create ad76025000gis25670.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad76025000gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 7.0000000
 Saving current map
![2]XIMAGE> read/expo ad76025000gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 1222.6841
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :     7.14286
  Min and max :   0  26
 Max-preserving scaling factor :     1.9230769
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     146728.
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (4:51:56)

-> Smoothing ad76025000gis25670_all.totsky with ad76025000gis25670.totexpo
-> Clipping exposures below 11004.1570314 seconds
-> Detecting sources in ad76025000gis25670_all.smooth
-> Standard Output From STOOL ascasource:

128 148 4.96176e-05 44 9 5.17777

-> Smoothing ad76025000gis25670_hi.totsky with ad76025000gis25670.totexpo
-> Clipping exposures below 11004.1570314 seconds
-> Detecting sources in ad76025000gis25670_hi.smooth
-> Standard Output From STOOL ascasource:

128 149 2.78077e-05 42 8 5.00184

-> Smoothing ad76025000gis25670_lo.totsky with ad76025000gis25670.totexpo
-> Clipping exposures below 11004.1570314 seconds
-> Detecting sources in ad76025000gis25670_lo.smooth
-> Standard Output From STOOL ascasource:

127 146 2.78077e-05 38 11 6.71736

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

128 148 24 F

-> Sources with radius >= 2

128 148 24 F

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad76025000gis25670.src
-> Smoothing ad76025000sis32002_all.totsky with ad76025000sis32002.totexpo
-> Clipping exposures below 8474.2199706 seconds
-> Detecting sources in ad76025000sis32002_all.smooth
-> Standard Output From STOOL ascasource:

156 205 3.8959e-05 18 15 11.0062
118 221 1.91485e-05 22 13 5.12209

-> Smoothing ad76025000sis32002_hi.totsky with ad76025000sis32002.totexpo
-> Clipping exposures below 8474.2199706 seconds
-> Detecting sources in ad76025000sis32002_hi.smooth
-> Smoothing ad76025000sis32002_lo.totsky with ad76025000sis32002.totexpo
-> Clipping exposures below 8474.2199706 seconds
-> Detecting sources in ad76025000sis32002_lo.smooth
-> Standard Output From STOOL ascasource:

155 208 2.34832e-05 15 16 16.1458
115 219 1.09264e-05 25 17 7.13744

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

156 205 18 T
118 221 22 T

-> Sources with radius >= 2

156 205 18 T
118 221 22 T

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad76025000sis32002.src
-> Generating region files
-> Converting (624.0,820.0,2.0) to s0 detector coordinates
-> Using events in: ad76025000s000102h.evt
-> No photons in 2.0 pixel radius
-> Converting (624.0,820.0,18.0) to s0 detector coordinates
-> Using events in: ad76025000s000102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   17845.000
 The mean of the selected column is                  469.60526
 The standard deviation of the selected column is    7.6247799
 The minimum of selected column is                   452.00000
 The maximum of selected column is                   483.00000
 The number of points used in calculation is               38

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   18529.000
 The mean of the selected column is                  487.60526
 The standard deviation of the selected column is    9.6829175
 The minimum of selected column is                   471.00000
 The maximum of selected column is                   511.00000
 The number of points used in calculation is               38

-> Converting (472.0,884.0,2.0) to s0 detector coordinates
-> Using events in: ad76025000s000102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   969.00000
 The mean of the selected column is                  484.50000
 The standard deviation of the selected column is    2.1213203
 The minimum of selected column is                   483.00000
 The maximum of selected column is                   486.00000
 The number of points used in calculation is                2

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   646.00000
 The mean of the selected column is                  323.00000
 The standard deviation of the selected column is           0.
 The minimum of selected column is                   323.00000
 The maximum of selected column is                   323.00000
 The number of points used in calculation is                2

-> Converting (624.0,820.0,2.0) to s1 detector coordinates
-> Using events in: ad76025000s100102h.evt
-> No photons in 2.0 pixel radius
-> Converting (624.0,820.0,18.0) to s1 detector coordinates
-> Using events in: ad76025000s100102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   13129.000
 The mean of the selected column is                  468.89286
 The standard deviation of the selected column is    8.1118993
 The minimum of selected column is                   449.00000
 The maximum of selected column is                   482.00000
 The number of points used in calculation is               28

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   14641.000
 The mean of the selected column is                  522.89286
 The standard deviation of the selected column is    8.6552886
 The minimum of selected column is                   507.00000
 The maximum of selected column is                   541.00000
 The number of points used in calculation is               28

-> Converting (472.0,884.0,2.0) to s1 detector coordinates
-> Using events in: ad76025000s100102h.evt
-> No photons in 2.0 pixel radius
-> Converting (472.0,884.0,22.0) to s1 detector coordinates
-> Using events in: ad76025000s100102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   7771.0000
 The mean of the selected column is                  485.68750
 The standard deviation of the selected column is    10.011452
 The minimum of selected column is                   469.00000
 The maximum of selected column is                   503.00000
 The number of points used in calculation is               16

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5721.0000
 The mean of the selected column is                  357.56250
 The standard deviation of the selected column is    8.3344166
 The minimum of selected column is                   342.00000
 The maximum of selected column is                   370.00000
 The number of points used in calculation is               16

-> Converting (128.0,148.0,2.0) to g2 detector coordinates
-> Using events in: ad76025000g200170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1612.0000
 The mean of the selected column is                  107.46667
 The standard deviation of the selected column is   0.83380939
 The minimum of selected column is                   106.00000
 The maximum of selected column is                   109.00000
 The number of points used in calculation is               15

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1755.0000
 The mean of the selected column is                  117.00000
 The standard deviation of the selected column is    1.1952286
 The minimum of selected column is                   115.00000
 The maximum of selected column is                   119.00000
 The number of points used in calculation is               15

-> Converting (128.0,148.0,2.0) to g3 detector coordinates
-> Using events in: ad76025000g300170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1699.0000
 The mean of the selected column is                  113.26667
 The standard deviation of the selected column is    1.4375906
 The minimum of selected column is                   111.00000
 The maximum of selected column is                   115.00000
 The number of points used in calculation is               15

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   1761.0000
 The mean of the selected column is                  117.40000
 The standard deviation of the selected column is   0.98561076
 The minimum of selected column is                   116.00000
 The maximum of selected column is                   119.00000
 The number of points used in calculation is               15

Extracting spectra and generating response matrices (5:7:32)

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:

1 ad76025000s000102h.evt 1929
1 ad76025000s000202m.evt 1929

-> Fetching SIS0_NOTCHIP0.1
-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Fetching SIS0_OFFCHIP.2
-> Extracting ad76025000s010102_1.pi from ad76025000s032002_1.reg and:

ad76025000s000102h.evt
ad76025000s000202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.13E+05      774 0100
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       265            890         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       160            614         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1929       425           1504         0         0         0
   in  32083.     seconds
 Spectrum         has      425 counts for 1.3247E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 32083.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.06740E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s010102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad76025000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad76025000s010102_1.pi group=yes
Wrote spectrum to ad76025000s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad76025000s010102_1.pi since it has 425 events
-> Extracting ad76025000s010102_2.pi from ad76025000s032002_2.reg and:

ad76025000s000102h.evt
ad76025000s000202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.13E+05      774 0100
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       233            922         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       153            621         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1929       386           1543         0         0         0
   in  32083.     seconds
 Spectrum         has      386 counts for 1.2031E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 32083.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.57910E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s010102_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad76025000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_2.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad76025000s010102_2.pi group=yes
Wrote spectrum to ad76025000s010102_2.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad76025000s010102_2.pi since it has 386 events
-> Standard Output From STOOL group_event_files:

1 ad76025000s000112h.evt 2087
1 ad76025000s000212m.evt 2087

-> SIS0_NOTCHIP0.1 already present in current directory
-> SIS0_NOTCHIP2.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> SIS0_OFFCHIP.2 already present in current directory
-> Extracting ad76025000s010212_1.pi from ad76025000s032002_1.reg and:

ad76025000s000112h.evt
ad76025000s000212m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1254 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.13E+05      833 0100
      2 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1254 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1254       274            980         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            833       170            663         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2087       444           1643         0         0         0
   in  32083.     seconds
 Spectrum         has      444 counts for 1.3839E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 32083.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.06740E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s010212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > read events ad76025000s000212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad76025000s010212_1.pi group=yes
Wrote spectrum to ad76025000s010212_1.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting ad76025000s010212_1.pi since it has 444 events
-> Extracting ad76025000s010212_2.pi from ad76025000s032002_2.reg and:

ad76025000s000112h.evt
ad76025000s000212m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1254 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.13E+05      833 0100
      2 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1254 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1254       252           1002         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            833       165            668         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2087       417           1670         0         0         0
   in  32083.     seconds
 Spectrum         has      417 counts for 1.2997E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 32083.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.57910E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s010212_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > read events ad76025000s000212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s032002_2.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad76025000s010212_2.pi group=yes
Wrote spectrum to ad76025000s010212_2.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting ad76025000s010212_2.pi since it has 417 events
-> Standard Output From STOOL group_event_files:

1 ad76025000s100102h.evt 1383
1 ad76025000s100202m.evt 1383

-> Fetching SIS1_NOTCHIP0.1
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_NOTCHIP2.1
-> Fetching SIS1_OFFCHIP.2
-> Extracting ad76025000s110102_1.pi from ad76025000s132002_1.reg and:

ad76025000s100102h.evt
ad76025000s100202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.58E+04      355 0001
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       190            838         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355        63            292         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1383       253           1130         0         0         0
   in  24411.     seconds
 Spectrum         has      253 counts for 1.0364E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24411.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.06740E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s110102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad76025000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad76025000s110102_1.pi group=yes
Wrote spectrum to ad76025000s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad76025000s110102_1.pi since it has 253 events
-> Extracting ad76025000s110102_2.pi from ad76025000s132002_2.reg and:

ad76025000s100102h.evt
ad76025000s100202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.58E+04      355 0001
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       183            845         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355        64            291         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1383       247           1136         0         0         0
   in  24411.     seconds
 Spectrum         has      247 counts for 1.0118E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24411.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.57910E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s110102_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad76025000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_2.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad76025000s110102_2.pi group=yes
Wrote spectrum to ad76025000s110102_2.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad76025000s110102_2.pi since it has 247 events
-> Standard Output From STOOL group_event_files:

1 ad76025000s100112h.evt 1473
1 ad76025000s100212m.evt 1473

-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_OFFCHIP.2 already present in current directory
-> Extracting ad76025000s110212_1.pi from ad76025000s132002_1.reg and:

ad76025000s100112h.evt
ad76025000s100212m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1102 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.58E+04      371 0001
      2 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1102 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1102       203            899         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            371        64            307         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1473       267           1206         0         0         0
   in  24411.     seconds
 Spectrum         has      267 counts for 1.0938E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24411.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.06740E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s110212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad76025000s100212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad76025000s110212_1.pi group=yes
Wrote spectrum to ad76025000s110212_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting ad76025000s110212_1.pi since it has 267 events
-> Extracting ad76025000s110212_2.pi from ad76025000s132002_2.reg and:

ad76025000s100112h.evt
ad76025000s100212m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1102 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.58E+04      371 0001
      2 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1102 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1102       196            906         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            371        69            302         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1473       265           1208         0         0         0
   in  24411.     seconds
 Spectrum         has      265 counts for 1.0856E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24411.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 1.57910E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000s110212_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad76025000s100212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s132002_2.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad76025000s110212_2.pi group=yes
Wrote spectrum to ad76025000s110212_2.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting ad76025000s110212_2.pi since it has 265 events
-> Standard Output From STOOL group_event_files:

1 ad76025000g200170h.evt 9273
1 ad76025000g200270m.evt 9273

-> GIS2_REGION256.4 already present in current directory
-> Extracting ad76025000g210170_1.pi from ad76025000g225670_1.reg and:

ad76025000g200170h.evt
ad76025000g200270m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     4760     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4513     1024
      2 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     4760     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4760       570           4190         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4513       510           4003         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9273      1080           8193         0         0         0
   in  36683.     seconds
 Spectrum         has     1080 counts for 2.9442E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 36683.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > read events ad76025000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad76025000g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad76025000g210170_1.pi group=yes
Wrote spectrum to ad76025000g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad76025000g210170_1.pi
-> Correcting ad76025000g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad76025000g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 35661.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      54  are grouped by a factor       55
 ...        55 -      70  are grouped by a factor       16
 ...        71 -      84  are grouped by a factor       14
 ...        85 -     100  are grouped by a factor        8
 ...       101 -     110  are grouped by a factor       10
 ...       111 -     121  are grouped by a factor       11
 ...       122 -     141  are grouped by a factor       10
 ...       142 -     152  are grouped by a factor       11
 ...       153 -     165  are grouped by a factor       13
 ...       166 -     176  are grouped by a factor       11
 ...       177 -     208  are grouped by a factor       16
 ...       209 -     236  are grouped by a factor       28
 ...       237 -     266  are grouped by a factor       30
 ...       267 -     292  are grouped by a factor       26
 ...       293 -     315  are grouped by a factor       23
 ...       316 -     354  are grouped by a factor       39
 ...       355 -     394  are grouped by a factor       40
 ...       395 -     440  are grouped by a factor       46
 ...       441 -     490  are grouped by a factor       50
 ...       491 -     543  are grouped by a factor       53
 ...       544 -     651  are grouped by a factor      108
 ...       652 -     763  are grouped by a factor      112
 ...       764 -     928  are grouped by a factor      165
 ...       929 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000g210170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad76025000g210170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   44   54
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  106.50  116.50 (detector coordinates)
 Point source at   26.50   14.46 (WMAP bins wrt optical axis)
 Point source at    7.41   28.62 (... in polar coordinates)
 
 Total counts in region = 1.07300E+03
 Weighted mean angle from optical axis  =  7.904 arcmin

-> Standard Output From STOOL group_event_files:

1 ad76025000g300170h.evt 9984
1 ad76025000g300270m.evt 9984

-> GIS3_REGION256.4 already present in current directory
-> Extracting ad76025000g310170_1.pi from ad76025000g325670_1.reg and:

ad76025000g300170h.evt
ad76025000g300270m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     5198     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4786     1024
      2 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     5198     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5198       684           4514         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4786       586           4200         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9984      1270           8714         0         0         0
   in  36679.     seconds
 Spectrum         has     1270 counts for 3.4625E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 36679.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > read events ad76025000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad76025000g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad76025000g310170_1.pi group=yes
Wrote spectrum to ad76025000g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad76025000g310170_1.pi
-> Correcting ad76025000g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad76025000g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 35596.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      48  are grouped by a factor       49
 ...        49 -      67  are grouped by a factor       19
 ...        68 -      79  are grouped by a factor       12
 ...        80 -      86  are grouped by a factor        7
 ...        87 -      95  are grouped by a factor        9
 ...        96 -     103  are grouped by a factor        8
 ...       104 -     109  are grouped by a factor        6
 ...       110 -     125  are grouped by a factor        8
 ...       126 -     134  are grouped by a factor        9
 ...       135 -     145  are grouped by a factor       11
 ...       146 -     165  are grouped by a factor       10
 ...       166 -     174  are grouped by a factor        9
 ...       175 -     186  are grouped by a factor       12
 ...       187 -     220  are grouped by a factor       17
 ...       221 -     238  are grouped by a factor       18
 ...       239 -     258  are grouped by a factor       20
 ...       259 -     284  are grouped by a factor       26
 ...       285 -     303  are grouped by a factor       19
 ...       304 -     340  are grouped by a factor       37
 ...       341 -     364  are grouped by a factor       24
 ...       365 -     400  are grouped by a factor       36
 ...       401 -     430  are grouped by a factor       30
 ...       431 -     466  are grouped by a factor       36
 ...       467 -     521  are grouped by a factor       55
 ...       522 -     588  are grouped by a factor       67
 ...       589 -     712  are grouped by a factor      124
 ...       713 -     814  are grouped by a factor      102
 ...       815 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000g310170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad76025000g310170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   50   54
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  112.50  116.50 (detector coordinates)
 Point source at    6.86   17.94 (WMAP bins wrt optical axis)
 Point source at    4.72   69.07 (... in polar coordinates)
 
 Total counts in region = 1.25800E+03
 Weighted mean angle from optical axis  =  5.752 arcmin

-> Plotting ad76025000g210170_1_pi.ps from ad76025000g210170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 05:52:48 15-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad76025000g210170_1.pi;
 Net count rate (cts/s) for file   1  3.0285E-02+/-  9.5630E-04
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad76025000g210170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad76025000g310170_1_pi.ps from ad76025000g310170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 05:53:11 15-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad76025000g310170_1.pi;
 Net count rate (cts/s) for file   1  3.5678E-02+/-  1.0683E-03
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad76025000g310170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

Extracting light curves (5:53:18)

-> TIMEDEL=4.0000000000E+00 for ad76025000s000102h.evt
-> TIMEDEL=4.0000000000E+00 for ad76025000s000202m.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad76025000s032002_1.reg
-> ... and files: ad76025000s000102h.evt ad76025000s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.13E+05      774 0100
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       265            890         0         0         0
 Writing events file
    265 events written to the output file
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       160            614         0         0         0
 Writing events file
    425 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1929       425           1504         0         0         0
   in  32083.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad76025000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> skipping ad76025000s000002_1.lc since it would have 425 events
-> Extracting events from region ad76025000s032002_2.reg
-> ... and files: ad76025000s000102h.evt ad76025000s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.13E+05      774 0100
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       233            922         0         0         0
 Writing events file
    233 events written to the output file
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       153            621         0         0         0
 Writing events file
    386 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1929       386           1543         0         0         0
   in  32083.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad76025000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_2.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> skipping ad76025000s000002_2.lc since it would have 386 events
-> TIMEDEL=4.0000000000E+00 for ad76025000s100102h.evt
-> TIMEDEL=4.0000000000E+00 for ad76025000s100202m.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad76025000s132002_1.reg
-> ... and files: ad76025000s100102h.evt ad76025000s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.58E+04      355 0001
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       190            838         0         0         0
 Writing events file
    190 events written to the output file
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355        63            292         0         0         0
 Writing events file
    253 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1383       253           1130         0         0         0
   in  24411.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad76025000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> skipping ad76025000s100002_1.lc since it would have 253 events
-> Extracting events from region ad76025000s132002_2.reg
-> ... and files: ad76025000s100102h.evt ad76025000s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.58E+04      355 0001
      2 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       183            845         0         0         0
 Writing events file
    183 events written to the output file
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355        64            291         0         0         0
 Writing events file
    247 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1383       247           1136         0         0         0
   in  24411.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad76025000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_2.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> skipping ad76025000s100002_2.lc since it would have 247 events
-> TIMEDEL=6.2500000000E-02 for ad76025000g200170h.evt
-> TIMEDEL=5.0000000000E-01 for ad76025000g200270m.evt
-> Minimum bin size is 5.0000000000E-01 seconds
-> Extracting events from region ad76025000g225670_1.reg
-> ... and files: ad76025000g200170h.evt ad76025000g200270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     4760     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4513     1024
      2 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     4760     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4760       570           4190         0         0         0
 Writing events file
    570 events written to the output file
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4513       510           4003         0         0         0
 Writing events file
   1080 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9273      1080           8193         0         0         0
   in  36683.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > read events ad76025000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad76025000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad76025000g200070_1.lc with binsize 1698.26501650529
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  00:33:58    0.37E+05     1080     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1080      1080              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1080      1080              0         0         0         0
   in  36683.     seconds
 Fits light curve has     1080 counts for 2.9442E-02 counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > set binsize 1698.26501650529
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad76025000g200070_1.lc
Wrote FITS light curve to file ad76025000g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Plotting ad76025000g200070_1.lc in ad76025000g200070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad76025000g200070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ NGC7714             Start Time (d) .... 11155 01:00:22.836
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11156 03:25:58.836
 No. of Rows .......           22        Bin Time (s) ......    1698.
 Right Ascension ... 3.5404E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.0722E+00          Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11155.04193097118  (days)       1: 0:22:836  (h:m:s:ms)
 Expected Stop .... 11156.14304208229  (days)       3:25:58:836  (h:m:s:ms)
 
 Minimum Newbin Time    1698.2650      (s)
 for Maximum Newbin No..               57
 
 Default Newbin Time is:   1698.2650    (s) (to have 1 Intv. of      57 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     1698.2650      (s)
 Maximum Newbin No.                57
 
 Default Newbins per Interval are:        57
 (giving       1 Interval of        57 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with        57 Newbins of       1698.27     (s)
 
      57 analysis results per interval
 
  4% completed
  9% completed
 13% completed
 18% completed
 22% completed
 27% completed
 31% completed
 36% completed
 40% completed
 45% completed
 50% completed
 54% completed
 59% completed
 63% completed
 68% completed
 72% completed
 77% completed
 81% completed
 86% completed
 90% completed
 95% completed
100% completed
 
 Intv    1   Start 11155  1:14:31
     Ser.1     Avg 0.2954E-01    Chisq  16.62       Var 0.2024E-04 Newbs.     22
               Min 0.2146E-01      Max 0.4175E-01expVar 0.2504E-04  Bins     22
PLT> @lightcurve.pco
!PLT> dev ad76025000g200070_1_lc.ps/ps
!PLT> LA File ad76025000g200070_1.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=6.2500000000E-02 for ad76025000g300170h.evt
-> TIMEDEL=5.0000000000E-01 for ad76025000g300270m.evt
-> Minimum bin size is 5.0000000000E-01 seconds
-> Extracting events from region ad76025000g325670_1.reg
-> ... and files: ad76025000g300170h.evt ad76025000g300270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     5198     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4786     1024
      2 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     5198     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5198       684           4514         0         0         0
 Writing events file
    684 events written to the output file
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4786       586           4200         0         0         0
 Writing events file
   1270 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9984      1270           8714         0         0         0
   in  36679.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > read events ad76025000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad76025000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad76025000g300070_1.lc with binsize 1444.03639222224
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  00:33:58    0.37E+05     1270     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1270      1270              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1270      1270              0         0         0         0
   in  36679.     seconds
 Fits light curve has     1270 counts for 3.4625E-02 counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > set binsize 1444.03639222224
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad76025000g300070_1.lc
Wrote FITS light curve to file ad76025000g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Plotting ad76025000g300070_1.lc in ad76025000g300070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad76025000g300070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ NGC7714             Start Time (d) .... 11155 01:00:22.836
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11156 03:25:58.836
 No. of Rows .......           22        Bin Time (s) ......    1444.
 Right Ascension ... 3.5404E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.0722E+00          Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11155.04193097118  (days)       1: 0:22:836  (h:m:s:ms)
 Expected Stop .... 11156.14304208229  (days)       3:25:58:836  (h:m:s:ms)
 
 Minimum Newbin Time    1444.0364      (s)
 for Maximum Newbin No..               66
 
 Default Newbin Time is:   1444.0364    (s) (to have 1 Intv. of      66 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     1444.0364      (s)
 Maximum Newbin No.                66
 
 Default Newbins per Interval are:        66
 (giving       1 Interval of        66 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with        66 Newbins of       1444.04     (s)
 
      66 analysis results per interval
 
  4% completed
  9% completed
 13% completed
 18% completed
 22% completed
 27% completed
 31% completed
 36% completed
 40% completed
 45% completed
 50% completed
 54% completed
 59% completed
 63% completed
 68% completed
 72% completed
 77% completed
 81% completed
 86% completed
 90% completed
 95% completed
100% completed
 
 Intv    1   Start 11155  1:12:24
     Ser.1     Avg 0.3529E-01    Chisq  29.05       Var 0.5621E-04 Newbs.     22
               Min 0.2171E-01      Max 0.5262E-01expVar 0.3153E-04  Bins     22
PLT> @lightcurve.pco
!PLT> dev ad76025000g300070_1_lc.ps/ps
!PLT> LA File ad76025000g300070_1.lc
!PLT> plot
!PLT> quit

-> Merging GTIs from the following files:

ad76025000g200170h.evt[2]
ad76025000g200270m.evt[2]

-> Making L1 light curve of ft981208_0033_0345G2HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  35028 output records from   35057  good input G2_L1    records.

-> Making L1 light curve of ft981208_0033_0345G2HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  32431 output records from   50905  good input G2_L1    records.

-> Merging GTIs from the following files:

ad76025000g300170h.evt[2]
ad76025000g300270m.evt[2]

-> Making L1 light curve of ft981208_0033_0345G3HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  33131 output records from   33159  good input G3_L1    records.

-> Making L1 light curve of ft981208_0033_0345G3HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  31771 output records from   48714  good input G3_L1    records.

Extracting source event files (6:4:5)

-> Extracting unbinned light curve ad76025000g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     4760     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4760       570           4190         0         0         0
 Writing events file
    570 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4760       570           4190         0         0         0
   in  18986.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad76025000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad76025000g200170.ulc use_events=yes
Wrote events list to file ad76025000g200170.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad76025000g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4513     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4513       510           4003         0         0         0
 Writing events file
    510 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4513       510           4003         0         0         0
   in  17696.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad76025000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad76025000g200270.ulc use_events=yes
Wrote events list to file ad76025000g200270.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad76025000g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.19E+05     5198     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5198       684           4514         0         0         0
 Writing events file
    684 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5198       684           4514         0         0         0
   in  18982.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad76025000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad76025000g300170.ulc use_events=yes
Wrote events list to file ad76025000g300170.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad76025000g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.18E+05     4786     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4786       586           4200         0         0         0
 Writing events file
    586 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4786       586           4200         0         0         0
   in  17696.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad76025000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad76025000g300270.ulc use_events=yes
Wrote events list to file ad76025000g300270.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad76025000s000102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       265            890         0         0         0
 Writing events file
    265 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1155       265            890         0         0         0
   in  18596.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad76025000s000102.ulc use_events=yes
Wrote events list to file ad76025000s000102.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s000102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1155 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1155       233            922         0         0         0
 Writing events file
    233 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1155       233            922         0         0         0
   in  18596.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_2.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad76025000s000102.ulc use_events=yes
Wrote events list to file ad76025000s000102.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s000112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1254 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1254       274            980         0         0         0
 Writing events file
    274 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1254       274            980         0         0         0
   in  18596.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad76025000s000112.ulc use_events=yes
Wrote events list to file ad76025000s000112.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad76025000s000112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1254 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1254       252           1002         0         0         0
 Writing events file
    252 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1254       252           1002         0         0         0
   in  18596.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s032002_2.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad76025000s000112.ulc use_events=yes
Wrote events list to file ad76025000s000112.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad76025000s000202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.13E+05      774 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       160            614         0         0         0
 Writing events file
    160 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           774       160            614         0         0         0
   in  13488.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad76025000s000202.ulc use_events=yes
Wrote events list to file ad76025000s000202.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s000202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.13E+05      774 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            774       153            621         0         0         0
 Writing events file
    153 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           774       153            621         0         0         0
   in  13488.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad76025000s032002_2.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad76025000s000202.ulc use_events=yes
Wrote events list to file ad76025000s000202.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s000212.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.13E+05      833 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            833       170            663         0         0         0
 Writing events file
    170 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           833       170            663         0         0         0
   in  13488.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad76025000s000212.ulc use_events=yes
Wrote events list to file ad76025000s000212.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad76025000s000212.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.13E+05      833 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            833       165            668         0         0         0
 Writing events file
    165 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           833       165            668         0         0         0
   in  13488.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s000212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad76025000s032002_2.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad76025000s000212.ulc use_events=yes
Wrote events list to file ad76025000s000212.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad76025000s100102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       190            838         0         0         0
 Writing events file
    190 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1028       190            838         0         0         0
   in  18620.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad76025000s100102.ulc use_events=yes
Wrote events list to file ad76025000s100102.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s100102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.19E+05     1028 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1028       183            845         0         0         0
 Writing events file
    183 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1028       183            845         0         0         0
   in  18620.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_2.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad76025000s100102.ulc use_events=yes
Wrote events list to file ad76025000s100102.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s100112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1102 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1102       203            899         0         0         0
 Writing events file
    203 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1102       203            899         0         0         0
   in  18620.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad76025000s100112.ulc use_events=yes
Wrote events list to file ad76025000s100112.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad76025000s100112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.19E+05     1102 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1102       196            906         0         0         0
 Writing events file
    196 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1102       196            906         0         0         0
   in  18620.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s132002_2.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad76025000s100112.ulc use_events=yes
Wrote events list to file ad76025000s100112.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad76025000s100202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.58E+04      355 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355        63            292         0         0         0
 Writing events file
     63 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           355        63            292         0         0         0
   in  5791.7     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad76025000s100202.ulc use_events=yes
Wrote events list to file ad76025000s100202.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s100202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.58E+04      355 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            355        64            291         0         0         0
 Writing events file
     64 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           355        64            291         0         0         0
   in  5791.7     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad76025000s132002_2.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad76025000s100202.ulc use_events=yes
Wrote events list to file ad76025000s100202.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad76025000s100212.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.58E+04      371 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            371        64            307         0         0         0
 Writing events file
     64 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           371        64            307         0         0         0
   in  5791.7     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad76025000s100212.ulc use_events=yes
Wrote events list to file ad76025000s100212.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad76025000s100212.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.58E+04      371 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            371        69            302         0         0         0
 Writing events file
     69 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           371        69            302         0         0         0
   in  5791.7     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000s100212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad76025000s132002_2.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad76025000s100212.ulc use_events=yes
Wrote events list to file ad76025000s100212.ulc
Changing Data directory from:
    /data/data19/seq_proc/ad0_76025000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Extracting FRAME mode data (6:13:45)

-> Extracting FRAME mode data from ft981208_0033.0345
-> stdout output from tlmFrm

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 20258
frame data: 187287842.663714 ---> 187287986.663282 
     S0, C1, 2 ccd mode;  Output File = fr981208_0033.0345_s0c1m2a.fits
frame data: 187288006.663222 ---> 187288150.66279 
     S0, C2, 2 ccd mode;  Output File = fr981208_0033.0345_s0c2m2a.fits
frame data: 187288170.66273 ---> 187288314.662298 
     S0, C1, 2 ccd mode;  Output File = fr981208_0033.0345_s0c1m2b.fits
frame data: 187288334.662238 ---> 187288478.661805 
     S0, C2, 2 ccd mode;  Output File = fr981208_0033.0345_s0c2m2b.fits
frame data: 187310426.595978 ---> 187310570.595545 
     S1, C3, 2 ccd mode;  Output File = fr981208_0033.0345_s1c3m2a.fits
frame data: 187310590.595485 ---> 187310734.595052 
     S1, C0, 2 ccd mode;  Output File = fr981208_0033.0345_s1c0m2a.fits
frame data: 187310754.594992 ---> 187310898.594559 
     S1, C3, 2 ccd mode;  Output File = fr981208_0033.0345_s1c3m2b.fits
frame data: 187310918.594499 ---> 187311062.594066 
     S1, C0, 2 ccd mode;  Output File = fr981208_0033.0345_s1c0m2b.fits

Total of 8 sets of frame data are extracted.

-> Processing frame fr981208_0033.0345_s0c1m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s0c1m2a.fits
Output zero level image : leveled_frame.tmp
Bias level = 291

-> Adding keywords to fr981208_0033.0345_s0c1m2a.fits
-> Processing frame fr981208_0033.0345_s0c1m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s0c1m2b.fits
Output zero level image : leveled_frame.tmp
Bias level = 291

-> Adding keywords to fr981208_0033.0345_s0c1m2b.fits
-> Processing frame fr981208_0033.0345_s0c2m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s0c2m2a.fits
Output zero level image : leveled_frame.tmp
Bias level = 324

-> Adding keywords to fr981208_0033.0345_s0c2m2a.fits
-> Processing frame fr981208_0033.0345_s0c2m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s0c2m2b.fits
Output zero level image : leveled_frame.tmp
Bias level = 323

-> Adding keywords to fr981208_0033.0345_s0c2m2b.fits
-> Processing frame fr981208_0033.0345_s1c0m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s1c0m2a.fits
Output zero level image : leveled_frame.tmp
Bias level = 223

-> Adding keywords to fr981208_0033.0345_s1c0m2a.fits
-> Processing frame fr981208_0033.0345_s1c0m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s1c0m2b.fits
Output zero level image : leveled_frame.tmp
Bias level = 222

-> Adding keywords to fr981208_0033.0345_s1c0m2b.fits
-> Processing frame fr981208_0033.0345_s1c3m2a.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s1c3m2a.fits
Output zero level image : leveled_frame.tmp
Bias level = 217

-> Adding keywords to fr981208_0033.0345_s1c3m2a.fits
-> Processing frame fr981208_0033.0345_s1c3m2b.fits with bias adjustment 0 ADU
-> stdout output from mkPixLvl

Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 0
Input frame data        : fr981208_0033.0345_s1c3m2b.fits
Output zero level image : leveled_frame.tmp
Bias level = 217

-> Adding keywords to fr981208_0033.0345_s1c3m2b.fits
-> Extracting corner pixel histograms
-> Extracting corner pixels from ad76025000s000101h.unf
-> Calculating corner pixel GTI from ft981208_0033_0345.mkf
-> Extracting corner pixels from ad76025000s000201m.unf
-> Extracting corner pixels from ad76025000s000301l.unf
-> Extracting corner pixels from ad76025000s000401h.unf
-> Extracting corner pixels from ad76025000s100101h.unf
-> Extracting corner pixels from ad76025000s100201m.unf
-> Extracting corner pixels from ad76025000s100301l.unf
-> Extracting corner pixels from ad76025000s100401h.unf

Extracting GIS calibration source spectra (6:18:45)

-> Standard Output From STOOL group_event_files:

1 ad76025000g200170h.unf 124435
1 ad76025000g200270m.unf 124435
1 ad76025000g200370l.unf 124435

-> Fetching GIS2_CALSRC256.2
-> Extracting ad76025000g220170.cal from ad76025000g200170h.unf ad76025000g200270m.unf ad76025000g200370l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    62356     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    32644     1024
      2 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    62356     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    32644     1024
      2 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29435     1024
      3 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    62356     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          62356      5280          57076         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          32644      3432          29212         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29435      2173          27262         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        124435     10885         113550         0         0         0
   in  71944.     seconds
 Spectrum         has    10885 counts for 0.1513     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 71944.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > read events ad76025000g200270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > read events ad76025000g200370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad76025000g220170.cal group=yes
Wrote spectrum to ad76025000g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad76025000g220170.cal
-> gis2v4_0.rmf already present in current directory
-> Plotting ad76025000g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 06:20:35 15-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad76025000g220170.cal;
 Net count rate (cts/s) for file   1  0.1513    +/-  1.4504E-03
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     7.3880656E+07 using    84 PHA bins.
 Reduced chi-squared =      972113.9     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     7.3880656E+07 using    84 PHA bins.
 Reduced chi-squared =      959489.1     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     7.3880656E+07 using    84 PHA bins.
 Reduced chi-squared =      947187.9     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      3757.218     using    84 PHA bins.
 Reduced chi-squared =      47.55972     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   846.187     -4         0.      3.9157E-03   6.105          0.
              5.4079E-02  1.0183E-02
   467.688     -5         0.      2.3116E-03   6.058          0.
              5.8654E-02  1.1143E-02
   389.988     -6         0.      2.8519E-03   6.033          0.
              5.9337E-02  1.2407E-02
   389.988      1         0.      2.8504E-03   6.033          0.
              5.9354E-02  1.2405E-02
   266.167     -1         0.      2.4201E-03   6.014      0.2391
              6.1348E-02  1.1881E-02
   92.8804     -2         0.      2.3617E-03   5.994      0.1635
              6.4894E-02  1.2137E-02
   90.7684     -3         0.      2.1653E-03   6.001      0.1691
              6.5893E-02  1.1766E-02
   90.4763     -4         0.      2.2989E-03   6.002      0.1685
              6.5976E-02  1.1664E-02
   90.3609     -5         0.      2.2149E-03   6.002      0.1685
              6.5989E-02  1.1649E-02
 Number of trials exceeded - last iteration delta =   0.1155
   90.3196     -6         0.      2.2681E-03   6.002      0.1685
              6.5991E-02  1.1647E-02
   90.3033     -7         0.      2.2343E-03   6.002      0.1685
              6.5992E-02  1.1647E-02
   90.2967     -8         0.      2.2556E-03   6.002      0.1685
              6.5992E-02  1.1647E-02
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 4.17E-08 | -0.99  0.00 -0.01 -0.04 -0.11
 3.14E-07 |  0.11 -0.06 -0.01 -0.09 -0.99
 1.05E-06 | -0.02 -0.05 -0.06  0.99 -0.09
 2.47E-05 |  0.01  0.86 -0.51  0.01 -0.04
 8.19E-05 | -0.01  0.51  0.86  0.07 -0.05
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               2.2556E-03 +/-  0.2238E-03
    3    3    2   gaussian/b LineE    keV        6.002     +/-  0.6274E-02
    4    4    2   gaussian/b Sigma    keV       0.1685     +/-  0.8154E-02
    5    5    2   gaussian/b norm               6.5992E-02 +/-  0.1221E-02
    6    3    3   gaussian/b LineE    keV        6.608     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1768     = par   4 *   1.049
    8    6    3   gaussian/b norm               1.1647E-02 +/-  0.7603E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      90.29668     using    84 PHA bins.
 Reduced chi-squared =      1.142996     for     79 degrees of freedom
 Null hypothesis probability = 0.181

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad76025000g220170.cal peaks at 6.002 +/- 0.006274 keV
-> Standard Output From STOOL group_event_files:

1 ad76025000g300170h.unf 121897
1 ad76025000g300270m.unf 121897
1 ad76025000g300370l.unf 121897

-> Fetching GIS3_CALSRC256.2
-> Extracting ad76025000g320170.cal from ad76025000g300170h.unf ad76025000g300270m.unf ad76025000g300370l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    60947     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    31609     1024
      2 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    60947     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    31609     1024
      2 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29341     1024
      3 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    60947     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          60947      4420          56527         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          31609      3008          28601         0         0         0
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29341      1911          27430         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        121897      9339         112558         0         0         0
   in  71940.     seconds
 Spectrum         has     9339 counts for 0.1298     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 71940.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad76025000g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA > read events ad76025000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > read events ad76025000g300270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > read events ad76025000g300370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad76025000g320170.cal group=yes
Wrote spectrum to ad76025000g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad76025000g320170.cal
-> gis3v4_0.rmf already present in current directory
-> Plotting ad76025000g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 06:22:17 15-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad76025000g320170.cal;
 Net count rate (cts/s) for file   1  0.1298    +/-  1.3437E-03
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     1.3600016E+08 using    84 PHA bins.
 Reduced chi-squared =      1789476.     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     1.3600016E+08 using    84 PHA bins.
 Reduced chi-squared =      1766236.     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     1.3600016E+08 using    84 PHA bins.
 Reduced chi-squared =      1743592.     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      4406.042     using    84 PHA bins.
 Reduced chi-squared =      55.77269     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   2438.15     -1         0.      6.7830E-04   5.817      0.2859
              8.1175E-02  1.7446E-02
   591.573     -2         0.      8.9395E-04   5.966      0.2769
              7.6279E-02  7.7684E-03
   217.253     -3         0.      1.4510E-03   5.885      0.1513
              5.9933E-02  1.5318E-02
   138.248     -4         0.      7.1858E-04   5.910      0.1526
              6.5274E-02  1.0661E-02
   135.195     -5         0.      1.3783E-03   5.909      0.1471
              6.5258E-02  1.0522E-02
   130.242     -6         0.      8.4262E-04   5.909      0.1466
              6.5254E-02  1.0520E-02
   128.386     -7         0.      1.2688E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   126.534     -8         0.      9.2247E-04   5.909      0.1465
              6.5252E-02  1.0522E-02
   125.674     -9         0.      1.1993E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   124.939    -10         0.      9.7492E-04   5.909      0.1465
              6.5252E-02  1.0522E-02
 Number of trials exceeded - last iteration delta =   0.7347
   124.555    -11         0.      1.1549E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   124.257    -12         0.      1.0093E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   124.089    -13         0.      1.1262E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   123.967    -14         0.      1.0317E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   123.894    -15         0.      1.1077E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   123.843    -16         0.      1.0464E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   123.812    -17         0.      1.0958E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   123.791    -18         0.      1.0559E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   123.778    -19         0.      1.0880E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
   123.769    -20         0.      1.0621E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
 Number of trials exceeded - last iteration delta =   8.9340E-03
   123.763    -21         0.      1.0830E-03   5.909      0.1465
              6.5252E-02  1.0522E-02
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 2.67E-08 | -1.00  0.00 -0.01 -0.02 -0.07
 2.53E-07 |  0.07 -0.06 -0.02 -0.08 -0.99
 1.01E-06 | -0.02 -0.05 -0.05  0.99 -0.08
 2.06E-05 |  0.00  0.89 -0.45  0.02 -0.04
 6.77E-05 |  0.00  0.45  0.89  0.06 -0.05
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.0830E-03 +/-  0.1717E-03
    3    3    2   gaussian/b LineE    keV        5.909     +/-  0.5465E-02
    4    4    2   gaussian/b Sigma    keV       0.1465     +/-  0.7614E-02
    5    5    2   gaussian/b norm               6.5252E-02 +/-  0.1132E-02
    6    3    3   gaussian/b LineE    keV        6.506     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1538     = par   4 *   1.049
    8    6    3   gaussian/b norm               1.0522E-02 +/-  0.6575E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      123.7634     using    84 PHA bins.
 Reduced chi-squared =      1.566625     for     79 degrees of freedom
 Null hypothesis probability = 9.668E-04

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad76025000g320170.cal peaks at 5.909 +/- 0.005465 keV

Extracting bright and dark Earth event files. (6:22:31)

-> Extracting bright and dark Earth events from ad76025000s000102h.unf
-> Extracting ad76025000s000102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.34E+05    78797 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          78797      8446              0     70351         0         0
 Writing events file
   8446 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         78797      8446              0     70351         0         0
   in  3183.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s000102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         8446
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              17        7832
 Flickering pixels iter, pixels & cnts :   1          20         183
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           37
 Number of (internal) image counts   :         8446
 Number of image cts rejected (N, %) :         801594.90
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           37            0            0
 
 Image counts      :             0         8446            0            0
 Image cts rejected:             0         8015            0            0
 Image cts rej (%) :          0.00        94.90         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         8446            0            0
 Total cts rejected:             0         8015            0            0
 Total cts rej (%) :          0.00        94.90         0.00         0.00
 
 Number of clean counts accepted  :          431
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           37
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s000112h.unf
-> Extracting ad76025000s000112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.34E+05    79361 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          79361      8480              0     70881         0         0
 Writing events file
   8480 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         79361      8480              0     70881         0         0
   in  3183.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s000112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         8480
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              17        7832
 Flickering pixels iter, pixels & cnts :   1          20         183
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           37
 Number of (internal) image counts   :         8480
 Number of image cts rejected (N, %) :         801594.52
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           37            0            0
 
 Image counts      :             0         8480            0            0
 Image cts rejected:             0         8015            0            0
 Image cts rej (%) :          0.00        94.52         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         8480            0            0
 Total cts rejected:             0         8015            0            0
 Total cts rej (%) :          0.00        94.52         0.00         0.00
 
 Number of clean counts accepted  :          465
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           37
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s000202m.unf
-> Extracting ad76025000s000202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.28E+05    46474 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          46474      4657              0     41817         0         0
 Writing events file
   4657 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         46474      4657              0     41817         0         0
   in  2311.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s000202m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4657
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              15        4279
 Flickering pixels iter, pixels & cnts :   1           9          60
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           24
 Number of (internal) image counts   :         4657
 Number of image cts rejected (N, %) :         433993.17
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           24            0            0
 
 Image counts      :             0         4657            0            0
 Image cts rejected:             0         4339            0            0
 Image cts rej (%) :          0.00        93.17         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         4657            0            0
 Total cts rejected:             0         4339            0            0
 Total cts rej (%) :          0.00        93.17         0.00         0.00
 
 Number of clean counts accepted  :          318
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           24
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s000212m.unf
-> Extracting ad76025000s000212m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.28E+05    46844 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000212m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          46844      4694              0     42150         0         0
 Writing events file
   4694 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         46844      4694              0     42150         0         0
   in  2311.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s000212m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000212m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4694
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              15        4279
 Flickering pixels iter, pixels & cnts :   1           9          60
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           24
 Number of (internal) image counts   :         4694
 Number of image cts rejected (N, %) :         433992.44
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           24            0            0
 
 Image counts      :             0         4694            0            0
 Image cts rejected:             0         4339            0            0
 Image cts rej (%) :          0.00        92.44         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         4694            0            0
 Total cts rejected:             0         4339            0            0
 Total cts rej (%) :          0.00        92.44         0.00         0.00
 
 Number of clean counts accepted  :          355
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           24
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s000302l.unf
-> Extracting ad76025000s000302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      LOW         1998-12-08  00:36:46    0.17E+05    10840 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          10840      7729              0      3111         0         0
 Writing events file
   7729 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10840      7729              0      3111         0         0
   in  5568.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s000302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         7729
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              15        7318
 Flickering pixels iter, pixels & cnts :   1           7          70
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           22
 Number of (internal) image counts   :         7729
 Number of image cts rejected (N, %) :         738895.59
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           22            0            0
 
 Image counts      :             0         7729            0            0
 Image cts rejected:             0         7388            0            0
 Image cts rej (%) :          0.00        95.59         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         7729            0            0
 Total cts rejected:             0         7388            0            0
 Total cts rej (%) :          0.00        95.59         0.00         0.00
 
 Number of clean counts accepted  :          341
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           22
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s000312l.unf
-> Extracting ad76025000s000312l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     LOW         1998-12-08  00:36:46    0.17E+05    10903 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          10903      7769              0      3134         0         0
 Writing events file
   7769 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10903      7769              0      3134         0         0
   in  5568.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s000312l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         7769
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :              15        7318
 Flickering pixels iter, pixels & cnts :   1           7          70
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           22
 Number of (internal) image counts   :         7769
 Number of image cts rejected (N, %) :         738895.10
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           22            0            0
 
 Image counts      :             0         7769            0            0
 Image cts rejected:             0         7388            0            0
 Image cts rej (%) :          0.00        95.10         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         7769            0            0
 Total cts rejected:             0         7388            0            0
 Total cts rej (%) :          0.00        95.10         0.00         0.00
 
 Number of clean counts accepted  :          381
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           22
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s000402h.unf
-> Extracting ad76025000s000402h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  16:22:28    0.17E+03     1489 0110
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000402h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1489      1488              0         1         0         0
 Writing events file
   1488 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1489      1488              0         1         0         0
   in  50.299     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000402h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s000402h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000402h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1488
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         169         745
cleaning chip # 2
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          84         381
cleaning chip # 3
 
 Number of pixels rejected           :          253
 Number of (internal) image counts   :         1488
 Number of image cts rejected (N, %) :         112675.67
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0          169           84            0
 
 Image counts      :             0         1006          482            0
 Image cts rejected:             0          745          381            0
 Image cts rej (%) :          0.00        74.06        79.05         0.00
 
    filtering data...
 
 Total counts      :             0         1006          482            0
 Total cts rejected:             0          745          381            0
 Total cts rej (%) :          0.00        74.06        79.05         0.00
 
 Number of clean counts accepted  :          362
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          253
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s000412h.unf
-> Extracting ad76025000s000412h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  16:22:28    0.17E+03     1540 0110
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s000412h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           1540      1538              0         2         0         0
 Writing events file
   1538 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1540      1538              0         2         0         0
   in  50.299     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s000412h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s000412h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s000412h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1538
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         169         747
cleaning chip # 2
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          85         393
cleaning chip # 3
 
 Number of pixels rejected           :          254
 Number of (internal) image counts   :         1538
 Number of image cts rejected (N, %) :         114074.12
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0          169           85            0
 
 Image counts      :             0         1026          512            0
 Image cts rejected:             0          747          393            0
 Image cts rej (%) :          0.00        72.81        76.76         0.00
 
    filtering data...
 
 Total counts      :             0         1026          512            0
 Total cts rejected:             0          747          393            0
 Total cts rej (%) :          0.00        72.81        76.76         0.00
 
 Number of clean counts accepted  :          398
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          254
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100102h.unf
-> Extracting ad76025000s100102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  03:10:22    0.34E+05   205412 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         205412     23001              0    182411         0         0
 Writing events file
  23001 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        205412     23001              0    182411         0         0
   in  3123.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s100102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 File NEVENTS keyword value  :        23001
 Total counts in chip images :        23000
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              44       21518
 Flickering pixels iter, pixels & cnts :   1          50        1139
 
 Number of pixels rejected           :           94
 Number of (internal) image counts   :        23000
 Number of image cts rejected (N, %) :        2265798.51
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           94
 
 Image counts      :             0            0            0        23000
 Image cts rejected:             0            0            0        22657
 Image cts rej (%) :          0.00         0.00         0.00        98.51
 
    filtering data...
 
 Total counts      :             0            0            0        23001
 Total cts rejected:             0            0            0        22658
 Total cts rej (%) :          0.00         0.00         0.00        98.51
 
 Number of clean counts accepted  :          343
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           94
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100112h.unf
-> Extracting ad76025000s100112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  03:10:22    0.34E+05   206106 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         206106     23033              0    183073         0         0
 Writing events file
  23033 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        206106     23033              0    183073         0         0
   in  3123.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s100112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        23033
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              44       21522
 Flickering pixels iter, pixels & cnts :   1          50        1140
 
 Number of pixels rejected           :           94
 Number of (internal) image counts   :        23033
 Number of image cts rejected (N, %) :        2266298.39
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           94
 
 Image counts      :             0            0            0        23033
 Image cts rejected:             0            0            0        22662
 Image cts rej (%) :          0.00         0.00         0.00        98.39
 
    filtering data...
 
 Total counts      :             0            0            0        23033
 Total cts rejected:             0            0            0        22662
 Total cts rej (%) :          0.00         0.00         0.00        98.39
 
 Number of clean counts accepted  :          371
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           94
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100202m.unf
-> Extracting ad76025000s100202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      MEDIUM      1998-12-08  00:33:50    0.28E+05   110948 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         110948     11664              0     99284         0         0
 Writing events file
  11664 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        110948     11664              0     99284         0         0
   in  2311.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s100202m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        11664
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              38       11101
 Flickering pixels iter, pixels & cnts :   1          31         291
 
 Number of pixels rejected           :           69
 Number of (internal) image counts   :        11664
 Number of image cts rejected (N, %) :        1139297.67
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           69
 
 Image counts      :             0            0            0        11664
 Image cts rejected:             0            0            0        11392
 Image cts rej (%) :          0.00         0.00         0.00        97.67
 
    filtering data...
 
 Total counts      :             0            0            0        11664
 Total cts rejected:             0            0            0        11392
 Total cts rej (%) :          0.00         0.00         0.00        97.67
 
 Number of clean counts accepted  :          272
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           69
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100212m.unf
-> Extracting ad76025000s100212m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     MEDIUM      1998-12-08  00:33:50    0.28E+05   111243 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100212m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         111243     11700              0     99543         0         0
 Writing events file
  11700 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        111243     11700              0     99543         0         0
   in  2311.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s100212m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100212m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        11700
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              38       11106
 Flickering pixels iter, pixels & cnts :   1          31         292
 
 Number of pixels rejected           :           69
 Number of (internal) image counts   :        11700
 Number of image cts rejected (N, %) :        1139897.42
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           69
 
 Image counts      :             0            0            0        11700
 Image cts rejected:             0            0            0        11398
 Image cts rej (%) :          0.00         0.00         0.00        97.42
 
    filtering data...
 
 Total counts      :             0            0            0        11700
 Total cts rejected:             0            0            0        11398
 Total cts rej (%) :          0.00         0.00         0.00        97.42
 
 Number of clean counts accepted  :          302
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           69
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100302l.unf
-> Extracting ad76025000s100302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      LOW         1998-12-08  00:36:46    0.17E+05    16400 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16400      9392              0      7008         0         0
 Writing events file
   9392 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16400      9392              0      7008         0         0
   in  5568.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s100302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         9392
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              21        8861
 Flickering pixels iter, pixels & cnts :   1          23         380
 
 Number of pixels rejected           :           44
 Number of (internal) image counts   :         9392
 Number of image cts rejected (N, %) :         924198.39
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           44
 
 Image counts      :             0            0            0         9392
 Image cts rejected:             0            0            0         9241
 Image cts rej (%) :          0.00         0.00         0.00        98.39
 
    filtering data...
 
 Total counts      :             0            0            0         9392
 Total cts rejected:             0            0            0         9241
 Total cts rej (%) :          0.00         0.00         0.00        98.39
 
 Number of clean counts accepted  :          151
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           44
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100312l.unf
-> Extracting ad76025000s100312l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     LOW         1998-12-08  00:36:46    0.17E+05    16432 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16432      9407              0      7025         0         0
 Writing events file
   9407 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16432      9407              0      7025         0         0
   in  5568.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s100312l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         9407
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              21        8861
 Flickering pixels iter, pixels & cnts :   1          23         380
 
 Number of pixels rejected           :           44
 Number of (internal) image counts   :         9407
 Number of image cts rejected (N, %) :         924198.24
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           44
 
 Image counts      :             0            0            0         9407
 Image cts rejected:             0            0            0         9241
 Image cts rej (%) :          0.00         0.00         0.00        98.24
 
    filtering data...
 
 Total counts      :             0            0            0         9407
 Total cts rejected:             0            0            0         9241
 Total cts rej (%) :          0.00         0.00         0.00        98.24
 
 Number of clean counts accepted  :          166
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           44
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100402h.unf
-> Extracting ad76025000s100402h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT      HIGH        1998-12-08  22:38:36    0.18E+03     9574 1001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100402h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9574      5904              0      3670         0         0
 Writing events file
   5904 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9574      5904              0      3670         0         0
   in  112.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100402h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad76025000s100402h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100402h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         5904
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         296        2341
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         303        2889
 
 Number of pixels rejected           :          599
 Number of (internal) image counts   :         5904
 Number of image cts rejected (N, %) :         523088.58
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           296            0            0          303
 
 Image counts      :          2655            0            0         3249
 Image cts rejected:          2341            0            0         2889
 Image cts rej (%) :         88.17         0.00         0.00        88.92
 
    filtering data...
 
 Total counts      :          2655            0            0         3249
 Total cts rejected:          2341            0            0         2889
 Total cts rej (%) :         88.17         0.00         0.00        88.92
 
 Number of clean counts accepted  :          674
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          599
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000s100412h.unf
-> Extracting ad76025000s100412h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 NGC7714     BRIGHT2     HIGH        1998-12-08  22:38:36    0.18E+03     9907 1001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000s100412h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9907      6122              0      3785         0         0
 Writing events file
   6122 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9907      6122              0      3785         0         0
   in  112.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000s100412h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   8.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad76025000s100412h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad76025000s100412h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         6122
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         304        2470
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         312        2961
 
 Number of pixels rejected           :          616
 Number of (internal) image counts   :         6122
 Number of image cts rejected (N, %) :         543188.71
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           304            0            0          312
 
 Image counts      :          2801            0            0         3321
 Image cts rejected:          2470            0            0         2961
 Image cts rej (%) :         88.18         0.00         0.00        89.16
 
    filtering data...
 
 Total counts      :          2801            0            0         3321
 Total cts rejected:          2470            0            0         2961
 Total cts rej (%) :         88.18         0.00         0.00        89.16
 
 Number of clean counts accepted  :          691
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          616
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad76025000g200170h.unf
-> Extracting ad76025000g200170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    62356     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          62356      2917              0     59439         0         0
 Writing events file
   2917 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         62356      2917              0     59439         0         0
   in  4515.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad76025000g200170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    62356     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          62356     35589              0     26767         0         0
 Writing events file
  35589 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         62356     35589              0     26767         0         0
   in  4661.8     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad76025000g200270m.unf
-> Extracting ad76025000g200270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    32644     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          32644      1775              0     30869         0         0
 Writing events file
   1775 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         32644      1775              0     30869         0         0
   in  2320.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad76025000g200270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    32644     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          32644     14323              0     18321         0         0
 Writing events file
  14323 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         32644     14323              0     18321         0         0
   in  3456.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad76025000g200370l.unf
-> Extracting ad76025000g200370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29435     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29435      2956              0     26479         0         0
 Writing events file
   2956 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         29435      2956              0     26479         0         0
   in  5344.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad76025000g200370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29435     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29435     25508              0      3927         0         0
 Writing events file
  25508 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         29435     25508              0      3927         0         0
   in  7999.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad76025000g300170h.unf
-> Extracting ad76025000g300170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    60947     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          60947      2497              0     58450         0         0
 Writing events file
   2497 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60947      2497              0     58450         0         0
   in  4515.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad76025000g300170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          HIGH        1998-12-08  03:10:30    0.33E+05    60947     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          60947     35629              0     25318         0         0
 Writing events file
  35629 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         60947     35629              0     25318         0         0
   in  4661.8     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad76025000g300270m.unf
-> Extracting ad76025000g300270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    31609     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          31609      1542              0     30067         0         0
 Writing events file
   1542 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         31609      1542              0     30067         0         0
   in  2320.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad76025000g300270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          MEDIUM      1998-12-08  00:33:58    0.25E+05    31609     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          31609     14504              0     17105         0         0
 Writing events file
  14504 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         31609     14504              0     17105         0         0
   in  3456.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad76025000g300370l.unf
-> Extracting ad76025000g300370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29341     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29341      2720              0     26621         0         0
 Writing events file
   2720 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         29341      2720              0     26621         0         0
   in  5344.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad76025000g300370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 NGC7714     PH          LOW         1998-12-08  00:36:54    0.14E+05    29341     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data19/seq_proc/ad0_76025000.003/ad76025000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29341     25646              0      3695         0         0
 Writing events file
  25646 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         29341     25646              0      3695         0         0
   in  7999.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data19/seq_proc/ad0_76025000.003/
Setting mkf directory to /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA > read events ad76025000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data19/seq_proc/ad0_76025000.003/
HK Directory is: /data/data19/seq_proc/ad0_76025000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

Determining information about this observation (6:50:1)

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory

Generating event file information page (6:52:16)

-> Summing time and events for s0 event files
-> Standard Output From STOOL get_uniq_keys:

ad76025000s000102h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s000402h.unf|S0CCDPOW|0110|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s000102h.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad76025000s000402h.unf|S0CCDMOD|2|How many S0 CCDs are in use: 1, 2, or 4
ad76025000s000102h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad76025000s000402h.unf|S0CCDLST|1 2 1 2|S0 CCD readout order

-> listing ad76025000s000102h.unf
-> listing ad76025000s000402h.unf
-> listing ad76025000s000202m.unf
-> listing ad76025000s000302l.unf
-> Standard Output From STOOL get_uniq_keys:

ad76025000s000112h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s000412h.unf|S0CCDPOW|0110|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s000112h.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad76025000s000412h.unf|S0CCDMOD|2|How many S0 CCDs are in use: 1, 2, or 4
ad76025000s000112h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad76025000s000412h.unf|S0CCDLST|1 2 1 2|S0 CCD readout order

-> listing ad76025000s000112h.unf
-> listing ad76025000s000412h.unf
-> listing ad76025000s000212m.unf
-> listing ad76025000s000312l.unf
-> Standard Output From STOOL get_uniq_keys:

ad76025000s000101h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s000401h.unf|S0CCDPOW|0110|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s000101h.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad76025000s000401h.unf|S0CCDMOD|2|How many S0 CCDs are in use: 1, 2, or 4
ad76025000s000101h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad76025000s000401h.unf|S0CCDLST|1 2 1 2|S0 CCD readout order

-> listing ad76025000s000101h.unf
-> listing ad76025000s000401h.unf
-> listing ad76025000s000201m.unf
-> listing ad76025000s000301l.unf
-> Summing time and events for s1 event files
-> Standard Output From STOOL get_uniq_keys:

ad76025000s100102h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s100402h.unf|S1CCDPOW|1001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s100102h.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad76025000s100402h.unf|S1CCDMOD|2|How many S1 CCDs are in use: 1, 2, or 4
ad76025000s100102h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad76025000s100402h.unf|S1CCDLST|3 0 3 0|S1 CCD readout order

-> listing ad76025000s100102h.unf
-> listing ad76025000s100402h.unf
-> listing ad76025000s100202m.unf
-> listing ad76025000s100302l.unf
-> Standard Output From STOOL get_uniq_keys:

ad76025000s100112h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s100412h.unf|S1CCDPOW|1001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s100112h.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad76025000s100412h.unf|S1CCDMOD|2|How many S1 CCDs are in use: 1, 2, or 4
ad76025000s100112h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad76025000s100412h.unf|S1CCDLST|3 0 3 0|S1 CCD readout order

-> listing ad76025000s100112h.unf
-> listing ad76025000s100412h.unf
-> listing ad76025000s100212m.unf
-> listing ad76025000s100312l.unf
-> Standard Output From STOOL get_uniq_keys:

ad76025000s100101h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s100401h.unf|S1CCDPOW|1001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad76025000s100101h.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad76025000s100401h.unf|S1CCDMOD|2|How many S1 CCDs are in use: 1, 2, or 4
ad76025000s100101h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad76025000s100401h.unf|S1CCDLST|3 0 3 0|S1 CCD readout order

-> listing ad76025000s100101h.unf
-> listing ad76025000s100401h.unf
-> listing ad76025000s100201m.unf
-> listing ad76025000s100301l.unf
-> Summing time and events for g2 event files
-> listing ad76025000g200170h.unf
-> listing ad76025000g200270m.unf
-> listing ad76025000g200370l.unf
-> Summing time and events for g3 event files
-> listing ad76025000g300170h.unf
-> listing ad76025000g300270m.unf
-> listing ad76025000g300370l.unf

Creating HTML header page (7:3:53)

Creating HTML source list (7:4:56)

Doing final wrapup of all files (7:8:10)

-> Copying job.par to ad76025000_003_job.par
-> Copying ad0.par to ad76025000_003_process.par
-> Creating ad76025000_tape.cat
-> Creating ad76025000_trend.cat
-> Creating ad76025000_003_file_info.html
-> Calculating site-independant checksums
-> Site independant checksum: 63941
-> Updating FITS checksum keywords
-> Running fverify on all FITS files