Processing Job Log for Sequence 78011000, version 001

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (12:44:52)

Checking input files for validity (12:44:53)

-> Verifying the input files
-> FITS file ft000601_1151.1200 exists
-> FITS file ad78011000_input.cat exists
-> FITS file fa000601_1151.1200 exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 2.3401389E+08 = 2000-06-01 11:51:26
-> Observation ends 2.3427362E+08 = 2000-06-04 12:00:16

Determine nominal pointing (12:44:58)

-> Checking fa000601_1151.1200 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect

Spacecraft Euler Angles: Phi=-19.51117 Theta=60.43354 Psi=22.13389
Telescope pointing: R.A.=340.69979 Dec=29.78374 Roll=292.02945 degrees

-> Nominal spacecraft Euler angles: Phi=-19.511166965729 Theta=60.433535191251 Psi=22.133887640489
-> Nominal telescope pointing: R.A.=340.69978806262 Dec=29.783737405387 Roll Angle=292.02944750716
-> Galactic Coordinates: Lii=92.201692 Bii=-25.303406

Running frfread on telemetry files (12:45:20)

-> Running frfread on ft000601_1151.1200
-> stdout output from frfread4

1.99999 second gap between superframes 1877 and 1878
99.9997 second gap between superframes 2879 and 2880
Dropping SF 3030 with inconsistent datamode 0/31
Dropping SF 3031 with inconsistent datamode 0/31
Dropping SF 3032 with invalid bit rate 7
GIS2 coordinate error time=234021370.75855 x=0 y=0 pha=9 rise=0
SIS1 peak error time=234021361.91773 x=289 y=409 ph0=2667 ph6=2863
FAINT event CCD=0, but using exposure CCD=3 time=234021361.91773
Dropping SF 3204 with corrupted frame indicator
Dropping SF 3206 with inconsistent datamode 0/31
Dropping SF 3211 with inconsistent datamode 0/31
Dropping SF 3212 with corrupted frame indicator
104 second gap between superframes 5202 and 5203
Warning: GIS2 bit assignment changed between 234027112.02532 and 234027114.02531
Warning: GIS3 bit assignment changed between 234027122.02529 and 234027124.02528
Warning: GIS2 bit assignment changed between 234027130.02526 and 234027132.02525
Warning: GIS3 bit assignment changed between 234027146.02521 and 234027148.02521
GIS2 coordinate error time=234027682.00115 x=0 y=0 pha=40 rise=0
SIS0 coordinate error time=234027673.89861 x=0 y=0 pha[0]=3 chip=0
SIS0 peak error time=234027673.89861 x=0 y=0 ph0=3 ph1=2019 ph2=3902 ph3=1280
FAINT event CCD=0, but using exposure CCD=1 time=234027673.89861
SIS0 coordinate error time=234027673.89861 x=0 y=3 pha[0]=2252 chip=0
SIS0 peak error time=234027673.89861 x=0 y=3 ph0=2252 ph7=3177
FAINT event CCD=0, but using exposure CCD=1 time=234027673.89861
SIS0 coordinate error time=234027673.89861 x=0 y=199 pha[0]=3632 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234027673.89861
Dropping SF 5529 with invalid bit rate 7
Dropping SF 7351 with inconsistent datamode 0/31
Dropping SF 7399 with corrupted frame indicator
99.9997 second gap between superframes 7479 and 7480
Warning: GIS2 bit assignment changed between 234033138.00717 and 234033140.00716
Warning: GIS3 bit assignment changed between 234033152.00713 and 234033154.00712
Warning: GIS2 bit assignment changed between 234033162.0071 and 234033164.00709
Warning: GIS3 bit assignment changed between 234033170.00707 and 234033172.00707
Dropping SF 7746 with inconsistent datamode 0/15
Dropping SF 7747 with inconsistent datamode 0/31
SIS1 coordinate error time=234033569.88084 x=0 y=0 pha[0]=32 chip=0
SIS1 peak error time=234033569.88084 x=0 y=0 ph0=32 ph1=2713 ph2=2240 ph3=3392 ph5=3828 ph6=3604 ph7=350 ph8=469
FAINT event CCD=0, but using exposure CCD=3 time=234033569.88084
SIS1 coordinate error time=234033569.88084 x=450 y=389 pha[0]=1446 chip=1
SIS1 peak error time=234033569.88084 x=450 y=389 ph0=1446 ph1=3480 ph2=2153 ph3=1477 ph4=1589 ph5=3392 ph7=2992 ph8=3818
FAINT event CCD=1, but using exposure CCD=3 time=234033569.88084
SIS1 coordinate error time=234033569.88084 x=2 y=321 pha[0]=2496 chip=0
SIS1 peak error time=234033569.88084 x=2 y=321 ph0=2496 ph5=3008
FAINT event CCD=0, but using exposure CCD=3 time=234033569.88084
SIS1 coordinate error time=234033569.88084 x=468 y=256 pha[0]=0 chip=0
SIS1 peak error time=234033569.88084 x=468 y=256 ph0=0 ph1=284 ph2=358 ph3=2932 ph4=2688
FAINT event CCD=0, but using exposure CCD=3 time=234033569.88084
Dropping SF 7749 with inconsistent datamode 0/31
GIS2 coordinate error time=234038045.28125 x=0 y=0 pha=12 rise=0
SIS1 peak error time=234038053.86714 x=321 y=284 ph0=372 ph5=3068
Dropping SF 7936 with synch code word 0 = 202 not 250
GIS2 coordinate error time=234038100.3123 x=0 y=0 pha=3 rise=0
Dropping SF 7938 with inconsistent CCD ID 3/0
GIS2 coordinate error time=234038141.99971 x=0 y=0 pha=384 rise=0
SIS1 coordinate error time=234038133.86689 x=0 y=0 pha[0]=0 chip=3
GIS2 coordinate error time=234038161.18716 x=0 y=0 pha=3 rise=0
SIS0 coordinate error time=234038149.86684 x=0 y=6 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234038149.86684
SIS1 coordinate error time=234038165.8668 x=384 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234038165.8668
Dropping SF 7942 with synch code word 1 = 51 not 243
Dropping SF 7943 with synch code word 1 = 147 not 243
Dropping SF 7944 with synch code word 1 = 240 not 243
Dropping SF 7945 with synch code word 1 = 195 not 243
Dropping SF 7948 with synch code word 0 = 226 not 250
Dropping SF 8102 with synch code word 1 = 240 not 243
Dropping SF 8103 with synch code word 2 = 44 not 32
SIS1 coordinate error time=234040077.86092 x=384 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234040077.86092
GIS2 coordinate error time=234040089.77596 x=0 y=0 pha=24 rise=0
GIS2 coordinate error time=234040091.47908 x=0 y=0 pha=12 rise=0
SIS1 coordinate error time=234040081.86091 x=0 y=0 pha[0]=0 chip=2
FAINT event CCD=2, but using exposure CCD=3 time=234040081.86091
GIS2 coordinate error time=234040092.83844 x=0 y=0 pha=48 rise=0
Dropping SF 8109 with synch code word 0 = 202 not 250
Dropping SF 8110 with corrupted frame indicator
601.998 second gap between superframes 9664 and 9665
Dropping SF 10747 with invalid bit rate 7
601.998 second gap between superframes 11529 and 11530
GIS2 coordinate error time=234066658.07696 x=0 y=0 pha=12 rise=0
GIS2 coordinate error time=234066659.60821 x=96 y=0 pha=0 rise=0
GIS2 coordinate error time=234066664.80741 x=0 y=0 pha=48 rise=0
Dropping SF 11544 with synch code word 0 = 251 not 250
609.998 second gap between superframes 13442 and 13443
Dropping SF 15081 with synch code word 0 = 154 not 250
Dropping SF 15082 with corrupted frame indicator
Dropping SF 15083 with synch code word 0 = 58 not 250
Dropping SF 15084 with inconsistent datamode 0/1
Dropping SF 15085 with invalid bit rate 7
67.9998 second gap between superframes 19347 and 19348
Dropping SF 19690 with corrupted frame indicator
Dropping SF 19692 with invalid bit rate 7
1.99999 second gap between superframes 20732 and 20733
87.9997 second gap between superframes 21722 and 21723
Warning: GIS2 bit assignment changed between 234105701.78283 and 234105703.78282
Warning: GIS3 bit assignment changed between 234105709.78281 and 234105711.7828
Warning: GIS2 bit assignment changed between 234105719.78277 and 234105721.78277
Warning: GIS3 bit assignment changed between 234105727.78275 and 234105729.78274
Dropping SF 21874 with inconsistent datamode 0/31
Dropping SF 21875 with inconsistent datamode 0/31
SIS0 coordinate error time=234105953.65703 x=501 y=501 pha[0]=2400 chip=3
SIS0 peak error time=234105953.65703 x=501 y=501 ph0=2400 ph1=3840 ph3=2640
FAINT event CCD=3, but using exposure CCD=1 time=234105953.65703
Dropping SF 22050 with inconsistent datamode 0/31
Dropping SF 22051 with inconsistent datamode 0/31
39.9999 second gap between superframes 23800 and 23801
Dropping SF 24038 with invalid bit rate 7
GIS2 coordinate error time=234118561.11463 x=128 y=0 pha=1 rise=0
GIS2 coordinate error time=234118577.86457 x=0 y=0 pha=96 rise=0
SIS0 coordinate error time=234118577.61748 x=0 y=0 pha[0]=24 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234118577.61748
SIS0 peak error time=234118585.61745 x=356 y=35 ph0=568 ph5=689
GIS2 coordinate error time=234118705.73136 x=0 y=0 pha=128 rise=0
SIS1 peak error time=234118697.6171 x=336 y=204 ph0=1511 ph1=3354
FAINT event CCD=2, but using exposure CCD=3 time=234118697.6171
SIS1 coordinate error time=234118857.61659 x=0 y=0 pha[0]=0 chip=3
Dropping SF 24391 with corrupted frame indicator
SIS1 coordinate error time=234118869.61655 x=0 y=0 pha[0]=96 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234118869.61655
GIS2 coordinate error time=234118882.44173 x=0 y=0 pha=48 rise=0
Dropping SF 24679 with inconsistent datamode 0/31
Dropping SF 25554 with corrupted frame indicator
Dropping SF 25555 with inconsistent datamode 0/31
Dropping SF 25757 with corrupted frame indicator
549.998 second gap between superframes 25976 and 25977
597.998 second gap between superframes 27913 and 27914
Dropping SF 28012 with synch code word 0 = 10 not 250
Dropping SF 28013 with synch code word 1 = 147 not 243
SIS0 peak error time=234151389.51411 x=329 y=323 ph0=289 ph8=2052
Dropping SF 28019 with synch code word 1 = 240 not 243
FAINT event CCD=0, but using exposure CCD=3 time=234151397.51408
1248 second gap between superframes 29848 and 29849
607.998 second gap between superframes 31463 and 31464
607.998 second gap between superframes 33393 and 33394
607.998 second gap between superframes 34869 and 34870
67.9998 second gap between superframes 36757 and 36758
Warning: GIS2 bit assignment changed between 234178481.55389 and 234178483.55388
Warning: GIS3 bit assignment changed between 234178485.55388 and 234178487.55387
Warning: GIS2 bit assignment changed between 234178495.55385 and 234178497.55384
Warning: GIS3 bit assignment changed between 234178503.55382 and 234178505.55382
Dropping SF 37091 with synch code word 0 = 252 not 250
SIS1 peak error time=234178897.42758 x=168 y=93 ph0=1999 ph2=2055
SIS1 coordinate error time=234178897.42758 x=220 y=477 pha[0]=228 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234178897.42758
Dropping SF 37095 with corrupted frame indicator
Dropping SF 37096 with inconsistent datamode 0/31
99.9997 second gap between superframes 39014 and 39015
Warning: GIS2 bit assignment changed between 234184297.53557 and 234184299.53556
Warning: GIS3 bit assignment changed between 234184301.53555 and 234184303.53555
Warning: GIS2 bit assignment changed between 234184311.53552 and 234184313.53552
Warning: GIS3 bit assignment changed between 234184317.5355 and 234184319.5355
Dropping SF 39355 with inconsistent datamode 0/31
Dropping SF 39357 with inconsistent datamode 0/31
1.99999 second gap between superframes 40328 and 40329
97.9997 second gap between superframes 41288 and 41289
Warning: GIS2 bit assignment changed between 234190433.51622 and 234190435.51622
Warning: GIS3 bit assignment changed between 234190439.5162 and 234190441.5162
Warning: GIS2 bit assignment changed between 234190447.51618 and 234190449.51617
Warning: GIS3 bit assignment changed between 234190455.51616 and 234190457.51615
Dropping SF 41439 with corrupted frame indicator
Dropping SF 41442 with inconsistent datamode 0/31
Dropping SF 41443 with inconsistent SIS mode 1/3
Dropping SF 41444 with inconsistent datamode 0/31
Dropping SF 41445 with inconsistent datamode 0/31
Dropping SF 41447 with inconsistent datamode 0/31
GIS2 coordinate error time=234190522.63021 x=0 y=0 pha=768 rise=0
GIS2 coordinate error time=234190522.64583 x=128 y=0 pha=16 rise=0
SIS1 coordinate error time=234190513.39095 x=109 y=0 pha[0]=0 chip=2
SIS1 peak error time=234190513.39095 x=109 y=0 ph0=0 ph8=2653
FAINT event CCD=2, but using exposure CCD=3 time=234190513.39095
FAINT event CCD=1, but using exposure CCD=3 time=234190861.38987
SIS1 coordinate error time=234190861.38987 x=152 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234190861.38987
SIS1 coordinate error time=234190861.38987 x=256 y=0 pha[0]=0 chip=3
SIS1 peak error time=234190861.38987 x=256 y=0 ph0=0 ph8=3176
35.9999 second gap between superframes 41622 and 41623
SIS0 coordinate error time=234201993.35483 x=0 y=0 pha[0]=58 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234201993.35483
Dropping SF 45810 with synch code word 0 = 8 not 250
Dropping SF 45832 with synch code word 0 = 219 not 250
Dropping SF 45846 with inconsistent datamode 0/31
SIS1 coordinate error time=234202185.35423 x=496 y=23 pha[0]=104 chip=2
SIS1 peak error time=234202185.35423 x=496 y=23 ph0=104 ph1=2960 ph2=1013
FAINT event CCD=2, but using exposure CCD=3 time=234202185.35423
SIS1 coordinate error time=234202185.35423 x=0 y=0 pha[0]=252 chip=0
SIS1 peak error time=234202185.35423 x=0 y=0 ph0=252 ph1=2364 ph2=1592 ph3=560
FAINT event CCD=0, but using exposure CCD=3 time=234202185.35423
Dropping SF 46110 with inconsistent datamode 0/31
Dropping SF 46118 with inconsistent datamode 31/0
Dropping SF 46120 with invalid bit rate 7
SIS1 coordinate error time=234203489.35014 x=6 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234203489.35014
Dropping SF 46458 with synch code word 2 = 16 not 32
Dropping SF 46459 with synch code word 0 = 226 not 250
SIS0 coordinate error time=234203497.35012 x=0 y=1 pha[0]=2048 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234203497.35012
SIS0 coordinate error time=234203497.35012 x=96 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234203497.35012
Dropping SF 46461 with synch code word 2 = 16 not 32
Dropping SF 47993 with corrupted frame indicator
Dropping SF 48000 with synch code word 1 = 195 not 243
Dropping SF 48001 with corrupted frame indicator
Dropping SF 48002 with synch code word 1 = 195 not 243
Dropping SF 48003 with synch code word 2 = 16 not 32
Dropping SF 48004 with synch code word 1 = 240 not 243
Dropping SF 48005 with inconsistent datamode 0/31
575.998 second gap between superframes 49646 and 49647
Dropping SF 50099 with synch code word 1 = 51 not 243
Dropping SF 50102 with inconsistent SIS mode 1/5
Dropping SF 50104 with synch code word 2 = 64 not 32
GIS2 coordinate error time=234225704.77725 x=0 y=0 pha=192 rise=0
SIS0 coordinate error time=234225697.28018 x=0 y=192 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225697.28018
SIS1 coordinate error time=234225697.28018 x=0 y=3 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234225697.28018
Dropping SF 50107 with synch code word 1 = 195 not 243
Dropping SF 50108 with corrupted frame indicator
Dropping SF 50109 with synch code word 1 = 240 not 243
SIS1 coordinate error time=234225705.28015 x=0 y=0 pha[0]=384 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234225705.28015
SIS1 coordinate error time=234225705.28015 x=0 y=0 pha[0]=192 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234225705.28015
Dropping SF 50111 with synch code word 1 = 51 not 243
GIS2 coordinate error time=234225717.77721 x=192 y=0 pha=0 rise=0
Dropping SF 50115 with synch code word 0 = 58 not 250
SIS1 coordinate error time=234225957.27935 x=0 y=0 pha[0]=3 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234225957.27935
SIS0 coordinate error time=234225961.27935 x=6 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225961.27935
SIS0 coordinate error time=234225961.27935 x=0 y=1 pha[0]=2048 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225961.27935
Dropping SF 50238 with corrupted frame indicator
GIS2 coordinate error time=234225972.13187 x=0 y=0 pha=24 rise=0
GIS2 coordinate error time=234225972.21781 x=0 y=0 pha=48 rise=0
GIS2 coordinate error time=234225973.26468 x=0 y=0 pha=48 rise=0
SIS0 coordinate error time=234225965.27933 x=0 y=0 pha[0]=3072 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225965.27933
Dropping SF 50240 with synch code word 1 = 240 not 243
Dropping SF 50241 with synch code word 0 = 58 not 250
Dropping SF 50242 with synch code word 1 = 147 not 243
Dropping SF 50243 with inconsistent datamode 0/31
Dropping SF 50244 with synch code word 1 = 147 not 243
Dropping SF 50245 with synch code word 1 = 240 not 243
Dropping SF 50246 with synch code word 1 = 147 not 243
Dropping SF 50247 with synch code word 2 = 224 not 32
GIS2 coordinate error time=234225991.57321 x=96 y=0 pha=0 rise=0
FAINT event CCD=2, but using exposure CCD=1 time=234225985.27927
SIS0 coordinate error time=234225985.27927 x=6 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225985.27927
SIS0 coordinate error time=234225985.27927 x=0 y=0 pha[0]=1 chip=0
SIS0 peak error time=234225985.27927 x=0 y=0 ph0=1 ph1=1984
FAINT event CCD=0, but using exposure CCD=1 time=234225985.27927
SIS0 coordinate error time=234225985.27927 x=0 y=0 pha[0]=3072 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225985.27927
SIS0 coordinate error time=234225985.27927 x=0 y=0 pha[0]=3 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225985.27927
SIS0 coordinate error time=234225985.27927 x=48 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234225985.27927
GIS2 coordinate error time=234225993.93258 x=128 y=0 pha=1 rise=0
SIS1 coordinate error time=234225985.27926 x=0 y=0 pha[0]=3072 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234225985.27926
SIS1 coordinate error time=234225985.27926 x=0 y=48 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=234225985.27926
GIS2 coordinate error time=234225996.17867 x=0 y=0 pha=24 rise=0
Dropping SF 50251 with synch code word 2 = 44 not 32
Dropping SF 50252 with synch code word 2 = 38 not 32
GIS2 coordinate error time=234226003.45208 x=0 y=0 pha=384 rise=0
607.998 second gap between superframes 51565 and 51566
Dropping SF 51865 with inconsistent datamode 0/31
Dropping SF 51930 with inconsistent datamode 0/31
SIS0 coordinate error time=234232969.25713 x=0 y=0 pha[0]=32 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234232969.25713
Dropping SF 53282 with corrupted frame indicator
607.998 second gap between superframes 53497 and 53498
Dropping SF 53743 with synch code word 1 = 240 not 243
Dropping SF 53746 with synch code word 2 = 64 not 32
Dropping SF 55424 with synch code word 0 = 252 not 250
SIS0 coordinate error time=234242317.22774 x=96 y=0 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=234242317.22774
GIS2 coordinate error time=234242325.72871 x=0 y=0 pha=6 rise=0
6197.98 second gap between superframes 57050 and 57051
319.999 second gap between superframes 61654 and 61655
Dropping SF 62484 with inconsistent datamode 0/31
62385 of 62484 super frames processed

-> 0% of superframes in ft000601_1151.1200 corrupted
-> stdout output from ffilecat

 WARNING:FCGCLS 3.1a: truncating at 999 items

-> Deleting the following files with NEVENTS=0

ft000601_1151_1200G200370H.fits
ft000601_1151_1200G200470M.fits
ft000601_1151_1200G200570H.fits
ft000601_1151_1200G200670H.fits
ft000601_1151_1200G201170H.fits
ft000601_1151_1200G201270M.fits
ft000601_1151_1200G201370H.fits
ft000601_1151_1200G201470H.fits
ft000601_1151_1200G201970H.fits
ft000601_1151_1200G202070H.fits
ft000601_1151_1200G202170H.fits
ft000601_1151_1200G202670H.fits
ft000601_1151_1200G202770H.fits
ft000601_1151_1200G203270H.fits
ft000601_1151_1200G203370H.fits
ft000601_1151_1200G203970M.fits
ft000601_1151_1200G204070L.fits
ft000601_1151_1200G207570H.fits
ft000601_1151_1200G207670H.fits
ft000601_1151_1200G207770L.fits
ft000601_1151_1200G207870H.fits
ft000601_1151_1200G207970H.fits
ft000601_1151_1200G208870H.fits
ft000601_1151_1200G208970H.fits
ft000601_1151_1200G209170H.fits
ft000601_1151_1200G209270H.fits
ft000601_1151_1200G209370L.fits
ft000601_1151_1200G210070H.fits
ft000601_1151_1200G210170H.fits
ft000601_1151_1200G210270L.fits
ft000601_1151_1200G210670H.fits
ft000601_1151_1200G210770H.fits
ft000601_1151_1200G210870M.fits
ft000601_1151_1200G210970H.fits
ft000601_1151_1200G211070H.fits
ft000601_1151_1200G211570H.fits
ft000601_1151_1200G211670H.fits
ft000601_1151_1200G211770M.fits
ft000601_1151_1200G211870M.fits
ft000601_1151_1200G211970H.fits
ft000601_1151_1200G212070H.fits
ft000601_1151_1200G212170H.fits
ft000601_1151_1200G212270H.fits
ft000601_1151_1200G212370H.fits
ft000601_1151_1200G212770H.fits
ft000601_1151_1200G212870H.fits
ft000601_1151_1200G212970H.fits
ft000601_1151_1200G213070H.fits
ft000601_1151_1200G213770H.fits
ft000601_1151_1200G213870H.fits
ft000601_1151_1200G214670H.fits
ft000601_1151_1200G215770M.fits
ft000601_1151_1200G215870L.fits
ft000601_1151_1200G218470H.fits
ft000601_1151_1200G218570H.fits
ft000601_1151_1200G219570H.fits
ft000601_1151_1200G219670H.fits
ft000601_1151_1200G219770H.fits
ft000601_1151_1200G220870H.fits
ft000601_1151_1200G220970M.fits
ft000601_1151_1200G221070M.fits
ft000601_1151_1200G221170H.fits
ft000601_1151_1200G221270H.fits
ft000601_1151_1200G221370H.fits
ft000601_1151_1200G221470H.fits
ft000601_1151_1200G222570H.fits
ft000601_1151_1200G222670H.fits
ft000601_1151_1200G222770H.fits
ft000601_1151_1200G222870H.fits
ft000601_1151_1200G223370H.fits
ft000601_1151_1200G223470H.fits
ft000601_1151_1200G224070H.fits
ft000601_1151_1200G224170M.fits
ft000601_1151_1200G224270H.fits
ft000601_1151_1200G224370H.fits
ft000601_1151_1200G224770H.fits
ft000601_1151_1200G224870H.fits
ft000601_1151_1200G224970H.fits
ft000601_1151_1200G225070H.fits
ft000601_1151_1200G225170H.fits
ft000601_1151_1200G225270H.fits
ft000601_1151_1200G225770H.fits
ft000601_1151_1200G225870M.fits
ft000601_1151_1200G225970H.fits
ft000601_1151_1200G226670H.fits
ft000601_1151_1200G226770H.fits
ft000601_1151_1200G226870H.fits
ft000601_1151_1200G226970H.fits
ft000601_1151_1200G227070H.fits
ft000601_1151_1200G227470H.fits
ft000601_1151_1200G227570H.fits
ft000601_1151_1200G227670M.fits
ft000601_1151_1200G227770M.fits
ft000601_1151_1200G227870H.fits
ft000601_1151_1200G227970H.fits
ft000601_1151_1200G228070H.fits
ft000601_1151_1200G228170H.fits
ft000601_1151_1200G228270H.fits
ft000601_1151_1200G228770H.fits
ft000601_1151_1200G228870M.fits
ft000601_1151_1200G228970M.fits
ft000601_1151_1200G229870L.fits
ft000601_1151_1200G234970H.fits
ft000601_1151_1200G235070M.fits
ft000601_1151_1200G235170M.fits
ft000601_1151_1200G235270H.fits
ft000601_1151_1200G235370H.fits
ft000601_1151_1200G235470H.fits
ft000601_1151_1200G235570H.fits
ft000601_1151_1200G236270H.fits
ft000601_1151_1200G236670H.fits
ft000601_1151_1200G236770H.fits
ft000601_1151_1200G236870L.fits
ft000601_1151_1200G236970H.fits
ft000601_1151_1200G237070H.fits
ft000601_1151_1200G237170H.fits
ft000601_1151_1200G237270H.fits
ft000601_1151_1200G237370H.fits
ft000601_1151_1200G237570H.fits
ft000601_1151_1200G238370H.fits
ft000601_1151_1200G238470H.fits
ft000601_1151_1200G238570L.fits
ft000601_1151_1200G238670M.fits
ft000601_1151_1200G238770M.fits
ft000601_1151_1200G238870M.fits
ft000601_1151_1200G238970M.fits
ft000601_1151_1200G239770H.fits
ft000601_1151_1200G239870H.fits
ft000601_1151_1200G239970M.fits
ft000601_1151_1200G240070M.fits
ft000601_1151_1200G240170H.fits
ft000601_1151_1200G240270H.fits
ft000601_1151_1200G240370H.fits
ft000601_1151_1200G240470H.fits
ft000601_1151_1200G241470H.fits
ft000601_1151_1200G241570H.fits
ft000601_1151_1200G241670L.fits
ft000601_1151_1200G241770L.fits
ft000601_1151_1200G300370H.fits
ft000601_1151_1200G300470M.fits
ft000601_1151_1200G300570H.fits
ft000601_1151_1200G301170H.fits
ft000601_1151_1200G301270M.fits
ft000601_1151_1200G301370H.fits
ft000601_1151_1200G301470H.fits
ft000601_1151_1200G301570H.fits
ft000601_1151_1200G302070H.fits
ft000601_1151_1200G302170H.fits
ft000601_1151_1200G302270H.fits
ft000601_1151_1200G302770H.fits
ft000601_1151_1200G302870H.fits
ft000601_1151_1200G303570H.fits
ft000601_1151_1200G303670H.fits
ft000601_1151_1200G303770H.fits
ft000601_1151_1200G304470M.fits
ft000601_1151_1200G304570L.fits
ft000601_1151_1200G307670H.fits
ft000601_1151_1200G307770H.fits
ft000601_1151_1200G307870L.fits
ft000601_1151_1200G307970H.fits
ft000601_1151_1200G308070H.fits
ft000601_1151_1200G308170H.fits
ft000601_1151_1200G308970H.fits
ft000601_1151_1200G309070H.fits
ft000601_1151_1200G309270H.fits
ft000601_1151_1200G309370H.fits
ft000601_1151_1200G309470L.fits
ft000601_1151_1200G310170H.fits
ft000601_1151_1200G310270H.fits
ft000601_1151_1200G310370L.fits
ft000601_1151_1200G310770H.fits
ft000601_1151_1200G310870H.fits
ft000601_1151_1200G310970M.fits
ft000601_1151_1200G311070H.fits
ft000601_1151_1200G311170H.fits
ft000601_1151_1200G311670H.fits
ft000601_1151_1200G311770H.fits
ft000601_1151_1200G311870M.fits
ft000601_1151_1200G311970M.fits
ft000601_1151_1200G312070H.fits
ft000601_1151_1200G312170H.fits
ft000601_1151_1200G312270H.fits
ft000601_1151_1200G312370H.fits
ft000601_1151_1200G312970H.fits
ft000601_1151_1200G313070H.fits
ft000601_1151_1200G313170H.fits
ft000601_1151_1200G313270H.fits
ft000601_1151_1200G313670H.fits
ft000601_1151_1200G313770H.fits
ft000601_1151_1200G314570H.fits
ft000601_1151_1200G314670H.fits
ft000601_1151_1200G315770M.fits
ft000601_1151_1200G315870L.fits
ft000601_1151_1200G318770H.fits
ft000601_1151_1200G319970H.fits
ft000601_1151_1200G320070H.fits
ft000601_1151_1200G321170H.fits
ft000601_1151_1200G321270M.fits
ft000601_1151_1200G321370M.fits
ft000601_1151_1200G321470H.fits
ft000601_1151_1200G321570H.fits
ft000601_1151_1200G321670H.fits
ft000601_1151_1200G321770H.fits
ft000601_1151_1200G321870H.fits
ft000601_1151_1200G322870H.fits
ft000601_1151_1200G322970H.fits
ft000601_1151_1200G323670H.fits
ft000601_1151_1200G323770H.fits
ft000601_1151_1200G323870H.fits
ft000601_1151_1200G323970H.fits
ft000601_1151_1200G324270H.fits
ft000601_1151_1200G324370H.fits
ft000601_1151_1200G324470M.fits
ft000601_1151_1200G324570H.fits
ft000601_1151_1200G324670H.fits
ft000601_1151_1200G325170H.fits
ft000601_1151_1200G325270H.fits
ft000601_1151_1200G325370H.fits
ft000601_1151_1200G325470H.fits
ft000601_1151_1200G325970H.fits
ft000601_1151_1200G326070M.fits
ft000601_1151_1200G326170H.fits
ft000601_1151_1200G326270H.fits
ft000601_1151_1200G326970H.fits
ft000601_1151_1200G327070H.fits
ft000601_1151_1200G327170H.fits
ft000601_1151_1200G327270H.fits
ft000601_1151_1200G327670H.fits
ft000601_1151_1200G327770M.fits
ft000601_1151_1200G327870M.fits
ft000601_1151_1200G327970H.fits
ft000601_1151_1200G328070H.fits
ft000601_1151_1200G328170H.fits
ft000601_1151_1200G328270H.fits
ft000601_1151_1200G328870H.fits
ft000601_1151_1200G328970M.fits
ft000601_1151_1200G329070M.fits
ft000601_1151_1200G330170L.fits
ft000601_1151_1200G335170H.fits
ft000601_1151_1200G335270H.fits
ft000601_1151_1200G335370M.fits
ft000601_1151_1200G335470M.fits
ft000601_1151_1200G335570H.fits
ft000601_1151_1200G335670H.fits
ft000601_1151_1200G335770H.fits
ft000601_1151_1200G335870H.fits
ft000601_1151_1200G335970H.fits
ft000601_1151_1200G336970H.fits
ft000601_1151_1200G337070H.fits
ft000601_1151_1200G337170L.fits
ft000601_1151_1200G337270H.fits
ft000601_1151_1200G337370H.fits
ft000601_1151_1200G337470H.fits
ft000601_1151_1200G337570H.fits
ft000601_1151_1200G337670H.fits
ft000601_1151_1200G337870H.fits
ft000601_1151_1200G338270H.fits
ft000601_1151_1200G338670H.fits
ft000601_1151_1200G338770H.fits
ft000601_1151_1200G338870L.fits
ft000601_1151_1200G338970M.fits
ft000601_1151_1200G339070M.fits
ft000601_1151_1200G339170M.fits
ft000601_1151_1200G339270M.fits
ft000601_1151_1200G340070H.fits
ft000601_1151_1200G340170H.fits
ft000601_1151_1200G340270M.fits
ft000601_1151_1200G340370M.fits
ft000601_1151_1200G340470H.fits
ft000601_1151_1200G340570H.fits
ft000601_1151_1200G340670H.fits
ft000601_1151_1200G340770H.fits
ft000601_1151_1200G340870H.fits
ft000601_1151_1200G341770H.fits
ft000601_1151_1200G341870H.fits
ft000601_1151_1200G341970L.fits
ft000601_1151_1200G342070L.fits
ft000601_1151_1200S000301M.fits
ft000601_1151_1200S005401M.fits
ft000601_1151_1200S005501H.fits
ft000601_1151_1200S006301L.fits
ft000601_1151_1200S008701M.fits
ft000601_1151_1200S009501M.fits
ft000601_1151_1200S010001H.fits
ft000601_1151_1200S010701M.fits
ft000601_1151_1200S013701L.fits
ft000601_1151_1200S014901M.fits
ft000601_1151_1200S100301M.fits
ft000601_1151_1200S105501M.fits
ft000601_1151_1200S105601H.fits
ft000601_1151_1200S106401L.fits
ft000601_1151_1200S108801M.fits
ft000601_1151_1200S109601M.fits
ft000601_1151_1200S110101H.fits
ft000601_1151_1200S110801M.fits
ft000601_1151_1200S113701L.fits
ft000601_1151_1200S114901M.fits

-> merging GTIs for s0 000601_1151.1200
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft000601_1151_1200S0HK.fits
-> Total ONTIME for s0 000601_1151.1200 = 223775
-> merging GTIs for s1 000601_1151.1200
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft000601_1151_1200S1HK.fits
-> Total ONTIME for s1 000601_1151.1200 = 223815
-> merging GTIs for g2 000601_1151.1200
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft000601_1151_1200G2HK.fits
-> Total ONTIME for g2 000601_1151.1200 = 195271
-> merging GTIs for g3 000601_1151.1200
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft000601_1151_1200G3HK.fits
-> Total ONTIME for g3 000601_1151.1200 = 195279

Merging event files from frfread (13:14:14)

-> Grouping s0 event files
-> stdout output from group_event_files

1 ft000601_1151_1200S000101H.fits 1452935
1 ft000601_1151_1200S000501H.fits 1452935
1 ft000601_1151_1200S000801H.fits 1452935
1 ft000601_1151_1200S001201H.fits 1452935
1 ft000601_1151_1200S001301H.fits 1452935
1 ft000601_1151_1200S001701H.fits 1452935
1 ft000601_1151_1200S002101H.fits 1452935
1 ft000601_1151_1200S003001H.fits 1452935
1 ft000601_1151_1200S003201H.fits 1452935
1 ft000601_1151_1200S003401H.fits 1452935
1 ft000601_1151_1200S003601H.fits 1452935
1 ft000601_1151_1200S004001H.fits 1452935
1 ft000601_1151_1200S004401H.fits 1452935
1 ft000601_1151_1200S004801H.fits 1452935
1 ft000601_1151_1200S005201H.fits 1452935
1 ft000601_1151_1200S005601H.fits 1452935
1 ft000601_1151_1200S006101H.fits 1452935
1 ft000601_1151_1200S006601H.fits 1452935
1 ft000601_1151_1200S007701H.fits 1452935
1 ft000601_1151_1200S007901H.fits 1452935
1 ft000601_1151_1200S008101H.fits 1452935
1 ft000601_1151_1200S008301H.fits 1452935
1 ft000601_1151_1200S008501H.fits 1452935
1 ft000601_1151_1200S008901H.fits 1452935
1 ft000601_1151_1200S009101H.fits 1452935
1 ft000601_1151_1200S009301H.fits 1452935
1 ft000601_1151_1200S009701H.fits 1452935
1 ft000601_1151_1200S010101H.fits 1452935
1 ft000601_1151_1200S010501H.fits 1452935
1 ft000601_1151_1200S010901H.fits 1452935
1 ft000601_1151_1200S011001H.fits 1452935
1 ft000601_1151_1200S011101H.fits 1452935
1 ft000601_1151_1200S011501H.fits 1452935
1 ft000601_1151_1200S011701H.fits 1452935
1 ft000601_1151_1200S012101H.fits 1452935
1 ft000601_1151_1200S012401H.fits 1452935
1 ft000601_1151_1200S012601H.fits 1452935
1 ft000601_1151_1200S012701H.fits 1452935
1 ft000601_1151_1200S012901H.fits 1452935
1 ft000601_1151_1200S013101H.fits 1452935
1 ft000601_1151_1200S013301H.fits 1452935
1 ft000601_1151_1200S013501H.fits 1452935
1 ft000601_1151_1200S013901H.fits 1452935
1 ft000601_1151_1200S014101H.fits 1452935
1 ft000601_1151_1200S014701H.fits 1452935
1 ft000601_1151_1200S015101H.fits 1452935
1 ft000601_1151_1200S015301H.fits 1452935
2 ft000601_1151_1200S000201M.fits 284397
2 ft000601_1151_1200S000401M.fits 284397
2 ft000601_1151_1200S000601M.fits 284397
2 ft000601_1151_1200S000901M.fits 284397
2 ft000601_1151_1200S001101M.fits 284397
2 ft000601_1151_1200S001401M.fits 284397
2 ft000601_1151_1200S001601M.fits 284397
2 ft000601_1151_1200S001801M.fits 284397
2 ft000601_1151_1200S002001M.fits 284397
2 ft000601_1151_1200S002201M.fits 284397
2 ft000601_1151_1200S002401M.fits 284397
2 ft000601_1151_1200S002601M.fits 284397
2 ft000601_1151_1200S002801M.fits 284397
2 ft000601_1151_1200S003101M.fits 284397
2 ft000601_1151_1200S003301M.fits 284397
2 ft000601_1151_1200S003701M.fits 284397
2 ft000601_1151_1200S003901M.fits 284397
2 ft000601_1151_1200S004901M.fits 284397
2 ft000601_1151_1200S005101M.fits 284397
2 ft000601_1151_1200S005301M.fits 284397
2 ft000601_1151_1200S006001M.fits 284397
2 ft000601_1151_1200S006501M.fits 284397
2 ft000601_1151_1200S006701M.fits 284397
2 ft000601_1151_1200S006901M.fits 284397
2 ft000601_1151_1200S007101M.fits 284397
2 ft000601_1151_1200S007301M.fits 284397
2 ft000601_1151_1200S007501M.fits 284397
2 ft000601_1151_1200S007801M.fits 284397
2 ft000601_1151_1200S008001M.fits 284397
2 ft000601_1151_1200S008201M.fits 284397
2 ft000601_1151_1200S008401M.fits 284397
2 ft000601_1151_1200S008601M.fits 284397
2 ft000601_1151_1200S008801M.fits 284397
2 ft000601_1151_1200S009001M.fits 284397
2 ft000601_1151_1200S009401M.fits 284397
2 ft000601_1151_1200S009601M.fits 284397
2 ft000601_1151_1200S009801M.fits 284397
2 ft000601_1151_1200S010201M.fits 284397
2 ft000601_1151_1200S010401M.fits 284397
2 ft000601_1151_1200S010601M.fits 284397
2 ft000601_1151_1200S010801M.fits 284397
2 ft000601_1151_1200S011201M.fits 284397
2 ft000601_1151_1200S011401M.fits 284397
2 ft000601_1151_1200S011601M.fits 284397
2 ft000601_1151_1200S011801M.fits 284397
2 ft000601_1151_1200S012001M.fits 284397
2 ft000601_1151_1200S012201M.fits 284397
2 ft000601_1151_1200S012501M.fits 284397
2 ft000601_1151_1200S012801M.fits 284397
2 ft000601_1151_1200S013001M.fits 284397
2 ft000601_1151_1200S013201M.fits 284397
2 ft000601_1151_1200S013401M.fits 284397
2 ft000601_1151_1200S014501M.fits 284397
2 ft000601_1151_1200S014801M.fits 284397
2 ft000601_1151_1200S015001M.fits 284397
2 ft000601_1151_1200S015201M.fits 284397
3 ft000601_1151_1200S001501L.fits 74755
3 ft000601_1151_1200S001901L.fits 74755
3 ft000601_1151_1200S002301L.fits 74755
3 ft000601_1151_1200S002701L.fits 74755
3 ft000601_1151_1200S002901L.fits 74755
3 ft000601_1151_1200S003501L.fits 74755
3 ft000601_1151_1200S003801L.fits 74755
3 ft000601_1151_1200S004101L.fits 74755
3 ft000601_1151_1200S004301L.fits 74755
3 ft000601_1151_1200S004501L.fits 74755
3 ft000601_1151_1200S004701L.fits 74755
3 ft000601_1151_1200S005701L.fits 74755
3 ft000601_1151_1200S005901L.fits 74755
3 ft000601_1151_1200S006201L.fits 74755
3 ft000601_1151_1200S006401L.fits 74755
3 ft000601_1151_1200S006801L.fits 74755
3 ft000601_1151_1200S007001L.fits 74755
3 ft000601_1151_1200S007201L.fits 74755
3 ft000601_1151_1200S007401L.fits 74755
3 ft000601_1151_1200S007601L.fits 74755
3 ft000601_1151_1200S011301L.fits 74755
3 ft000601_1151_1200S011901L.fits 74755
3 ft000601_1151_1200S012301L.fits 74755
3 ft000601_1151_1200S013601L.fits 74755
3 ft000601_1151_1200S013801L.fits 74755
3 ft000601_1151_1200S014001L.fits 74755
3 ft000601_1151_1200S014201L.fits 74755
3 ft000601_1151_1200S014401L.fits 74755
3 ft000601_1151_1200S014601L.fits 74755
3 ft000601_1151_1200S015401L.fits 74755
3 ft000601_1151_1200S015601L.fits 74755
4 ft000601_1151_1200S004201L.fits 270
4 ft000601_1151_1200S004601L.fits 270
4 ft000601_1151_1200S005801L.fits 270
4 ft000601_1151_1200S014301L.fits 270
4 ft000601_1151_1200S015501L.fits 270
5 ft000601_1151_1200S009201H.fits 141
6 ft000601_1151_1200S000701M.fits 77
6 ft000601_1151_1200S001001M.fits 77
6 ft000601_1151_1200S002501M.fits 77
6 ft000601_1151_1200S005001M.fits 77
6 ft000601_1151_1200S009901M.fits 77
6 ft000601_1151_1200S010301M.fits 77

-> Creating ad78011000s000101h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  47  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 47 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200S000101H.fits 
 2 -- ft000601_1151_1200S000501H.fits 
 3 -- ft000601_1151_1200S000801H.fits 
 4 -- ft000601_1151_1200S001201H.fits 
 5 -- ft000601_1151_1200S001301H.fits 
 6 -- ft000601_1151_1200S001701H.fits 
 7 -- ft000601_1151_1200S002101H.fits 
 8 -- ft000601_1151_1200S003001H.fits 
 9 -- ft000601_1151_1200S003201H.fits 
 10 -- ft000601_1151_1200S003401H.fits 
 11 -- ft000601_1151_1200S003601H.fits 
 12 -- ft000601_1151_1200S004001H.fits 
 13 -- ft000601_1151_1200S004401H.fits 
 14 -- ft000601_1151_1200S004801H.fits 
 15 -- ft000601_1151_1200S005201H.fits 
 16 -- ft000601_1151_1200S005601H.fits 
 17 -- ft000601_1151_1200S006101H.fits 
 18 -- ft000601_1151_1200S006601H.fits 
 19 -- ft000601_1151_1200S007701H.fits 
 20 -- ft000601_1151_1200S007901H.fits 
 21 -- ft000601_1151_1200S008101H.fits 
 22 -- ft000601_1151_1200S008301H.fits 
 23 -- ft000601_1151_1200S008501H.fits 
 24 -- ft000601_1151_1200S008901H.fits 
 25 -- ft000601_1151_1200S009101H.fits 
 26 -- ft000601_1151_1200S009301H.fits 
 27 -- ft000601_1151_1200S009701H.fits 
 28 -- ft000601_1151_1200S010101H.fits 
 29 -- ft000601_1151_1200S010501H.fits 
 30 -- ft000601_1151_1200S010901H.fits 
 31 -- ft000601_1151_1200S011001H.fits 
 32 -- ft000601_1151_1200S011101H.fits 
 33 -- ft000601_1151_1200S011501H.fits 
 34 -- ft000601_1151_1200S011701H.fits 
 35 -- ft000601_1151_1200S012101H.fits 
 36 -- ft000601_1151_1200S012401H.fits 
 37 -- ft000601_1151_1200S012601H.fits 
 38 -- ft000601_1151_1200S012701H.fits 
 39 -- ft000601_1151_1200S012901H.fits 
 40 -- ft000601_1151_1200S013101H.fits 
 41 -- ft000601_1151_1200S013301H.fits 
 42 -- ft000601_1151_1200S013501H.fits 
 43 -- ft000601_1151_1200S013901H.fits 
 44 -- ft000601_1151_1200S014101H.fits 
 45 -- ft000601_1151_1200S014701H.fits 
 46 -- ft000601_1151_1200S015101H.fits 
 47 -- ft000601_1151_1200S015301H.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200S000101H.fits 
 2 -- ft000601_1151_1200S000501H.fits 
 3 -- ft000601_1151_1200S000801H.fits 
 4 -- ft000601_1151_1200S001201H.fits 
 5 -- ft000601_1151_1200S001301H.fits 
 6 -- ft000601_1151_1200S001701H.fits 
 7 -- ft000601_1151_1200S002101H.fits 
 8 -- ft000601_1151_1200S003001H.fits 
 9 -- ft000601_1151_1200S003201H.fits 
 10 -- ft000601_1151_1200S003401H.fits 
 11 -- ft000601_1151_1200S003601H.fits 
 12 -- ft000601_1151_1200S004001H.fits 
 13 -- ft000601_1151_1200S004401H.fits 
 14 -- ft000601_1151_1200S004801H.fits 
 15 -- ft000601_1151_1200S005201H.fits 
 16 -- ft000601_1151_1200S005601H.fits 
 17 -- ft000601_1151_1200S006101H.fits 
 18 -- ft000601_1151_1200S006601H.fits 
 19 -- ft000601_1151_1200S007701H.fits 
 20 -- ft000601_1151_1200S007901H.fits 
 21 -- ft000601_1151_1200S008101H.fits 
 22 -- ft000601_1151_1200S008301H.fits 
 23 -- ft000601_1151_1200S008501H.fits 
 24 -- ft000601_1151_1200S008901H.fits 
 25 -- ft000601_1151_1200S009101H.fits 
 26 -- ft000601_1151_1200S009301H.fits 
 27 -- ft000601_1151_1200S009701H.fits 
 28 -- ft000601_1151_1200S010101H.fits 
 29 -- ft000601_1151_1200S010501H.fits 
 30 -- ft000601_1151_1200S010901H.fits 
 31 -- ft000601_1151_1200S011001H.fits 
 32 -- ft000601_1151_1200S011101H.fits 
 33 -- ft000601_1151_1200S011501H.fits 
 34 -- ft000601_1151_1200S011701H.fits 
 35 -- ft000601_1151_1200S012101H.fits 
 36 -- ft000601_1151_1200S012401H.fits 
 37 -- ft000601_1151_1200S012601H.fits 
 38 -- ft000601_1151_1200S012701H.fits 
 39 -- ft000601_1151_1200S012901H.fits 
 40 -- ft000601_1151_1200S013101H.fits 
 41 -- ft000601_1151_1200S013301H.fits 
 42 -- ft000601_1151_1200S013501H.fits 
 43 -- ft000601_1151_1200S013901H.fits 
 44 -- ft000601_1151_1200S014101H.fits 
 45 -- ft000601_1151_1200S014701H.fits 
 46 -- ft000601_1151_1200S015101H.fits 
 47 -- ft000601_1151_1200S015301H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000s000201m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  56  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 56 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200S000201M.fits 
 2 -- ft000601_1151_1200S000401M.fits 
 3 -- ft000601_1151_1200S000601M.fits 
 4 -- ft000601_1151_1200S000901M.fits 
 5 -- ft000601_1151_1200S001101M.fits 
 6 -- ft000601_1151_1200S001401M.fits 
 7 -- ft000601_1151_1200S001601M.fits 
 8 -- ft000601_1151_1200S001801M.fits 
 9 -- ft000601_1151_1200S002001M.fits 
 10 -- ft000601_1151_1200S002201M.fits 
 11 -- ft000601_1151_1200S002401M.fits 
 12 -- ft000601_1151_1200S002601M.fits 
 13 -- ft000601_1151_1200S002801M.fits 
 14 -- ft000601_1151_1200S003101M.fits 
 15 -- ft000601_1151_1200S003301M.fits 
 16 -- ft000601_1151_1200S003701M.fits 
 17 -- ft000601_1151_1200S003901M.fits 
 18 -- ft000601_1151_1200S004901M.fits 
 19 -- ft000601_1151_1200S005101M.fits 
 20 -- ft000601_1151_1200S005301M.fits 
 21 -- ft000601_1151_1200S006001M.fits 
 22 -- ft000601_1151_1200S006501M.fits 
 23 -- ft000601_1151_1200S006701M.fits 
 24 -- ft000601_1151_1200S006901M.fits 
 25 -- ft000601_1151_1200S007101M.fits 
 26 -- ft000601_1151_1200S007301M.fits 
 27 -- ft000601_1151_1200S007501M.fits 
 28 -- ft000601_1151_1200S007801M.fits 
 29 -- ft000601_1151_1200S008001M.fits 
 30 -- ft000601_1151_1200S008201M.fits 
 31 -- ft000601_1151_1200S008401M.fits 
 32 -- ft000601_1151_1200S008601M.fits 
 33 -- ft000601_1151_1200S008801M.fits 
 34 -- ft000601_1151_1200S009001M.fits 
 35 -- ft000601_1151_1200S009401M.fits 
 36 -- ft000601_1151_1200S009601M.fits 
 37 -- ft000601_1151_1200S009801M.fits 
 38 -- ft000601_1151_1200S010201M.fits 
 39 -- ft000601_1151_1200S010401M.fits 
 40 -- ft000601_1151_1200S010601M.fits 
 41 -- ft000601_1151_1200S010801M.fits 
 42 -- ft000601_1151_1200S011201M.fits 
 43 -- ft000601_1151_1200S011401M.fits 
 44 -- ft000601_1151_1200S011601M.fits 
 45 -- ft000601_1151_1200S011801M.fits 
 46 -- ft000601_1151_1200S012001M.fits 
 47 -- ft000601_1151_1200S012201M.fits 
 48 -- ft000601_1151_1200S012501M.fits 
 49 -- ft000601_1151_1200S012801M.fits 
 50 -- ft000601_1151_1200S013001M.fits 
 51 -- ft000601_1151_1200S013201M.fits 
 52 -- ft000601_1151_1200S013401M.fits 
 53 -- ft000601_1151_1200S014501M.fits 
 54 -- ft000601_1151_1200S014801M.fits 
 55 -- ft000601_1151_1200S015001M.fits 
 56 -- ft000601_1151_1200S015201M.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200S000201M.fits 
 2 -- ft000601_1151_1200S000401M.fits 
 3 -- ft000601_1151_1200S000601M.fits 
 4 -- ft000601_1151_1200S000901M.fits 
 5 -- ft000601_1151_1200S001101M.fits 
 6 -- ft000601_1151_1200S001401M.fits 
 7 -- ft000601_1151_1200S001601M.fits 
 8 -- ft000601_1151_1200S001801M.fits 
 9 -- ft000601_1151_1200S002001M.fits 
 10 -- ft000601_1151_1200S002201M.fits 
 11 -- ft000601_1151_1200S002401M.fits 
 12 -- ft000601_1151_1200S002601M.fits 
 13 -- ft000601_1151_1200S002801M.fits 
 14 -- ft000601_1151_1200S003101M.fits 
 15 -- ft000601_1151_1200S003301M.fits 
 16 -- ft000601_1151_1200S003701M.fits 
 17 -- ft000601_1151_1200S003901M.fits 
 18 -- ft000601_1151_1200S004901M.fits 
 19 -- ft000601_1151_1200S005101M.fits 
 20 -- ft000601_1151_1200S005301M.fits 
 21 -- ft000601_1151_1200S006001M.fits 
 22 -- ft000601_1151_1200S006501M.fits 
 23 -- ft000601_1151_1200S006701M.fits 
 24 -- ft000601_1151_1200S006901M.fits 
 25 -- ft000601_1151_1200S007101M.fits 
 26 -- ft000601_1151_1200S007301M.fits 
 27 -- ft000601_1151_1200S007501M.fits 
 28 -- ft000601_1151_1200S007801M.fits 
 29 -- ft000601_1151_1200S008001M.fits 
 30 -- ft000601_1151_1200S008201M.fits 
 31 -- ft000601_1151_1200S008401M.fits 
 32 -- ft000601_1151_1200S008601M.fits 
 33 -- ft000601_1151_1200S008801M.fits 
 34 -- ft000601_1151_1200S009001M.fits 
 35 -- ft000601_1151_1200S009401M.fits 
 36 -- ft000601_1151_1200S009601M.fits 
 37 -- ft000601_1151_1200S009801M.fits 
 38 -- ft000601_1151_1200S010201M.fits 
 39 -- ft000601_1151_1200S010401M.fits 
 40 -- ft000601_1151_1200S010601M.fits 
 41 -- ft000601_1151_1200S010801M.fits 
 42 -- ft000601_1151_1200S011201M.fits 
 43 -- ft000601_1151_1200S011401M.fits 
 44 -- ft000601_1151_1200S011601M.fits 
 45 -- ft000601_1151_1200S011801M.fits 
 46 -- ft000601_1151_1200S012001M.fits 
 47 -- ft000601_1151_1200S012201M.fits 
 48 -- ft000601_1151_1200S012501M.fits 
 49 -- ft000601_1151_1200S012801M.fits 
 50 -- ft000601_1151_1200S013001M.fits 
 51 -- ft000601_1151_1200S013201M.fits 
 52 -- ft000601_1151_1200S013401M.fits 
 53 -- ft000601_1151_1200S014501M.fits 
 54 -- ft000601_1151_1200S014801M.fits 
 55 -- ft000601_1151_1200S015001M.fits 
 56 -- ft000601_1151_1200S015201M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000s000301l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  31  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 31 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200S001501L.fits 
 2 -- ft000601_1151_1200S001901L.fits 
 3 -- ft000601_1151_1200S002301L.fits 
 4 -- ft000601_1151_1200S002701L.fits 
 5 -- ft000601_1151_1200S002901L.fits 
 6 -- ft000601_1151_1200S003501L.fits 
 7 -- ft000601_1151_1200S003801L.fits 
 8 -- ft000601_1151_1200S004101L.fits 
 9 -- ft000601_1151_1200S004301L.fits 
 10 -- ft000601_1151_1200S004501L.fits 
 11 -- ft000601_1151_1200S004701L.fits 
 12 -- ft000601_1151_1200S005701L.fits 
 13 -- ft000601_1151_1200S005901L.fits 
 14 -- ft000601_1151_1200S006201L.fits 
 15 -- ft000601_1151_1200S006401L.fits 
 16 -- ft000601_1151_1200S006801L.fits 
 17 -- ft000601_1151_1200S007001L.fits 
 18 -- ft000601_1151_1200S007201L.fits 
 19 -- ft000601_1151_1200S007401L.fits 
 20 -- ft000601_1151_1200S007601L.fits 
 21 -- ft000601_1151_1200S011301L.fits 
 22 -- ft000601_1151_1200S011901L.fits 
 23 -- ft000601_1151_1200S012301L.fits 
 24 -- ft000601_1151_1200S013601L.fits 
 25 -- ft000601_1151_1200S013801L.fits 
 26 -- ft000601_1151_1200S014001L.fits 
 27 -- ft000601_1151_1200S014201L.fits 
 28 -- ft000601_1151_1200S014401L.fits 
 29 -- ft000601_1151_1200S014601L.fits 
 30 -- ft000601_1151_1200S015401L.fits 
 31 -- ft000601_1151_1200S015601L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200S001501L.fits 
 2 -- ft000601_1151_1200S001901L.fits 
 3 -- ft000601_1151_1200S002301L.fits 
 4 -- ft000601_1151_1200S002701L.fits 
 5 -- ft000601_1151_1200S002901L.fits 
 6 -- ft000601_1151_1200S003501L.fits 
 7 -- ft000601_1151_1200S003801L.fits 
 8 -- ft000601_1151_1200S004101L.fits 
 9 -- ft000601_1151_1200S004301L.fits 
 10 -- ft000601_1151_1200S004501L.fits 
 11 -- ft000601_1151_1200S004701L.fits 
 12 -- ft000601_1151_1200S005701L.fits 
 13 -- ft000601_1151_1200S005901L.fits 
 14 -- ft000601_1151_1200S006201L.fits 
 15 -- ft000601_1151_1200S006401L.fits 
 16 -- ft000601_1151_1200S006801L.fits 
 17 -- ft000601_1151_1200S007001L.fits 
 18 -- ft000601_1151_1200S007201L.fits 
 19 -- ft000601_1151_1200S007401L.fits 
 20 -- ft000601_1151_1200S007601L.fits 
 21 -- ft000601_1151_1200S011301L.fits 
 22 -- ft000601_1151_1200S011901L.fits 
 23 -- ft000601_1151_1200S012301L.fits 
 24 -- ft000601_1151_1200S013601L.fits 
 25 -- ft000601_1151_1200S013801L.fits 
 26 -- ft000601_1151_1200S014001L.fits 
 27 -- ft000601_1151_1200S014201L.fits 
 28 -- ft000601_1151_1200S014401L.fits 
 29 -- ft000601_1151_1200S014601L.fits 
 30 -- ft000601_1151_1200S015401L.fits 
 31 -- ft000601_1151_1200S015601L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 270 events ft000601_1151_1200S004201L.fits ft000601_1151_1200S004601L.fits ft000601_1151_1200S005801L.fits ft000601_1151_1200S014301L.fits ft000601_1151_1200S015501L.fits
-> Ignoring the following files containing 141 events ft000601_1151_1200S009201H.fits
-> Ignoring the following files containing 77 events ft000601_1151_1200S000701M.fits ft000601_1151_1200S001001M.fits ft000601_1151_1200S002501M.fits ft000601_1151_1200S005001M.fits ft000601_1151_1200S009901M.fits ft000601_1151_1200S010301M.fits
-> Grouping s1 event files
-> stdout output from group_event_files

1 ft000601_1151_1200S100101H.fits 1239548
1 ft000601_1151_1200S100501H.fits 1239548
1 ft000601_1151_1200S100801H.fits 1239548
1 ft000601_1151_1200S101201H.fits 1239548
1 ft000601_1151_1200S101301H.fits 1239548
1 ft000601_1151_1200S101401H.fits 1239548
1 ft000601_1151_1200S101801H.fits 1239548
1 ft000601_1151_1200S102201H.fits 1239548
1 ft000601_1151_1200S103101H.fits 1239548
1 ft000601_1151_1200S103301H.fits 1239548
1 ft000601_1151_1200S103501H.fits 1239548
1 ft000601_1151_1200S103701H.fits 1239548
1 ft000601_1151_1200S104101H.fits 1239548
1 ft000601_1151_1200S104501H.fits 1239548
1 ft000601_1151_1200S104901H.fits 1239548
1 ft000601_1151_1200S105301H.fits 1239548
1 ft000601_1151_1200S105701H.fits 1239548
1 ft000601_1151_1200S106201H.fits 1239548
1 ft000601_1151_1200S106701H.fits 1239548
1 ft000601_1151_1200S107801H.fits 1239548
1 ft000601_1151_1200S108001H.fits 1239548
1 ft000601_1151_1200S108201H.fits 1239548
1 ft000601_1151_1200S108401H.fits 1239548
1 ft000601_1151_1200S108601H.fits 1239548
1 ft000601_1151_1200S109001H.fits 1239548
1 ft000601_1151_1200S109201H.fits 1239548
1 ft000601_1151_1200S109401H.fits 1239548
1 ft000601_1151_1200S109801H.fits 1239548
1 ft000601_1151_1200S110201H.fits 1239548
1 ft000601_1151_1200S110601H.fits 1239548
1 ft000601_1151_1200S111001H.fits 1239548
1 ft000601_1151_1200S111401H.fits 1239548
1 ft000601_1151_1200S111601H.fits 1239548
1 ft000601_1151_1200S112001H.fits 1239548
1 ft000601_1151_1200S112301H.fits 1239548
1 ft000601_1151_1200S112501H.fits 1239548
1 ft000601_1151_1200S112701H.fits 1239548
1 ft000601_1151_1200S112901H.fits 1239548
1 ft000601_1151_1200S113101H.fits 1239548
1 ft000601_1151_1200S113301H.fits 1239548
1 ft000601_1151_1200S113501H.fits 1239548
1 ft000601_1151_1200S113901H.fits 1239548
1 ft000601_1151_1200S114101H.fits 1239548
1 ft000601_1151_1200S114701H.fits 1239548
1 ft000601_1151_1200S115101H.fits 1239548
1 ft000601_1151_1200S115301H.fits 1239548
2 ft000601_1151_1200S100201M.fits 268482
2 ft000601_1151_1200S100401M.fits 268482
2 ft000601_1151_1200S100601M.fits 268482
2 ft000601_1151_1200S100901M.fits 268482
2 ft000601_1151_1200S101101M.fits 268482
2 ft000601_1151_1200S101501M.fits 268482
2 ft000601_1151_1200S101701M.fits 268482
2 ft000601_1151_1200S101901M.fits 268482
2 ft000601_1151_1200S102101M.fits 268482
2 ft000601_1151_1200S102301M.fits 268482
2 ft000601_1151_1200S102501M.fits 268482
2 ft000601_1151_1200S102701M.fits 268482
2 ft000601_1151_1200S102901M.fits 268482
2 ft000601_1151_1200S103201M.fits 268482
2 ft000601_1151_1200S103401M.fits 268482
2 ft000601_1151_1200S103801M.fits 268482
2 ft000601_1151_1200S104001M.fits 268482
2 ft000601_1151_1200S105001M.fits 268482
2 ft000601_1151_1200S105201M.fits 268482
2 ft000601_1151_1200S105401M.fits 268482
2 ft000601_1151_1200S106101M.fits 268482
2 ft000601_1151_1200S106601M.fits 268482
2 ft000601_1151_1200S106801M.fits 268482
2 ft000601_1151_1200S107001M.fits 268482
2 ft000601_1151_1200S107201M.fits 268482
2 ft000601_1151_1200S107401M.fits 268482
2 ft000601_1151_1200S107601M.fits 268482
2 ft000601_1151_1200S107901M.fits 268482
2 ft000601_1151_1200S108101M.fits 268482
2 ft000601_1151_1200S108301M.fits 268482
2 ft000601_1151_1200S108501M.fits 268482
2 ft000601_1151_1200S108701M.fits 268482
2 ft000601_1151_1200S108901M.fits 268482
2 ft000601_1151_1200S109101M.fits 268482
2 ft000601_1151_1200S109501M.fits 268482
2 ft000601_1151_1200S109701M.fits 268482
2 ft000601_1151_1200S109901M.fits 268482
2 ft000601_1151_1200S110301M.fits 268482
2 ft000601_1151_1200S110501M.fits 268482
2 ft000601_1151_1200S110701M.fits 268482
2 ft000601_1151_1200S110901M.fits 268482
2 ft000601_1151_1200S111101M.fits 268482
2 ft000601_1151_1200S111301M.fits 268482
2 ft000601_1151_1200S111501M.fits 268482
2 ft000601_1151_1200S111701M.fits 268482
2 ft000601_1151_1200S111901M.fits 268482
2 ft000601_1151_1200S112101M.fits 268482
2 ft000601_1151_1200S112401M.fits 268482
2 ft000601_1151_1200S112801M.fits 268482
2 ft000601_1151_1200S113001M.fits 268482
2 ft000601_1151_1200S113201M.fits 268482
2 ft000601_1151_1200S113401M.fits 268482
2 ft000601_1151_1200S114501M.fits 268482
2 ft000601_1151_1200S114801M.fits 268482
2 ft000601_1151_1200S115001M.fits 268482
2 ft000601_1151_1200S115201M.fits 268482
3 ft000601_1151_1200S101601L.fits 75576
3 ft000601_1151_1200S102001L.fits 75576
3 ft000601_1151_1200S102401L.fits 75576
3 ft000601_1151_1200S102801L.fits 75576
3 ft000601_1151_1200S103001L.fits 75576
3 ft000601_1151_1200S103601L.fits 75576
3 ft000601_1151_1200S103901L.fits 75576
3 ft000601_1151_1200S104201L.fits 75576
3 ft000601_1151_1200S104401L.fits 75576
3 ft000601_1151_1200S104601L.fits 75576
3 ft000601_1151_1200S104801L.fits 75576
3 ft000601_1151_1200S105801L.fits 75576
3 ft000601_1151_1200S106001L.fits 75576
3 ft000601_1151_1200S106301L.fits 75576
3 ft000601_1151_1200S106501L.fits 75576
3 ft000601_1151_1200S106901L.fits 75576
3 ft000601_1151_1200S107101L.fits 75576
3 ft000601_1151_1200S107301L.fits 75576
3 ft000601_1151_1200S107501L.fits 75576
3 ft000601_1151_1200S107701L.fits 75576
3 ft000601_1151_1200S111201L.fits 75576
3 ft000601_1151_1200S111801L.fits 75576
3 ft000601_1151_1200S112201L.fits 75576
3 ft000601_1151_1200S113601L.fits 75576
3 ft000601_1151_1200S113801L.fits 75576
3 ft000601_1151_1200S114001L.fits 75576
3 ft000601_1151_1200S114201L.fits 75576
3 ft000601_1151_1200S114401L.fits 75576
3 ft000601_1151_1200S114601L.fits 75576
3 ft000601_1151_1200S115401L.fits 75576
3 ft000601_1151_1200S115601L.fits 75576
4 ft000601_1151_1200S104301L.fits 272
4 ft000601_1151_1200S104701L.fits 272
4 ft000601_1151_1200S105901L.fits 272
4 ft000601_1151_1200S114301L.fits 272
4 ft000601_1151_1200S115501L.fits 272
5 ft000601_1151_1200S109301H.fits 176
6 ft000601_1151_1200S100701M.fits 82
6 ft000601_1151_1200S101001M.fits 82
6 ft000601_1151_1200S102601M.fits 82
6 ft000601_1151_1200S105101M.fits 82
6 ft000601_1151_1200S110001M.fits 82
6 ft000601_1151_1200S110401M.fits 82
7 ft000601_1151_1200S112601H.fits 9

-> Creating ad78011000s100101h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  46  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 46 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200S100101H.fits 
 2 -- ft000601_1151_1200S100501H.fits 
 3 -- ft000601_1151_1200S100801H.fits 
 4 -- ft000601_1151_1200S101201H.fits 
 5 -- ft000601_1151_1200S101301H.fits 
 6 -- ft000601_1151_1200S101401H.fits 
 7 -- ft000601_1151_1200S101801H.fits 
 8 -- ft000601_1151_1200S102201H.fits 
 9 -- ft000601_1151_1200S103101H.fits 
 10 -- ft000601_1151_1200S103301H.fits 
 11 -- ft000601_1151_1200S103501H.fits 
 12 -- ft000601_1151_1200S103701H.fits 
 13 -- ft000601_1151_1200S104101H.fits 
 14 -- ft000601_1151_1200S104501H.fits 
 15 -- ft000601_1151_1200S104901H.fits 
 16 -- ft000601_1151_1200S105301H.fits 
 17 -- ft000601_1151_1200S105701H.fits 
 18 -- ft000601_1151_1200S106201H.fits 
 19 -- ft000601_1151_1200S106701H.fits 
 20 -- ft000601_1151_1200S107801H.fits 
 21 -- ft000601_1151_1200S108001H.fits 
 22 -- ft000601_1151_1200S108201H.fits 
 23 -- ft000601_1151_1200S108401H.fits 
 24 -- ft000601_1151_1200S108601H.fits 
 25 -- ft000601_1151_1200S109001H.fits 
 26 -- ft000601_1151_1200S109201H.fits 
 27 -- ft000601_1151_1200S109401H.fits 
 28 -- ft000601_1151_1200S109801H.fits 
 29 -- ft000601_1151_1200S110201H.fits 
 30 -- ft000601_1151_1200S110601H.fits 
 31 -- ft000601_1151_1200S111001H.fits 
 32 -- ft000601_1151_1200S111401H.fits 
 33 -- ft000601_1151_1200S111601H.fits 
 34 -- ft000601_1151_1200S112001H.fits 
 35 -- ft000601_1151_1200S112301H.fits 
 36 -- ft000601_1151_1200S112501H.fits 
 37 -- ft000601_1151_1200S112701H.fits 
 38 -- ft000601_1151_1200S112901H.fits 
 39 -- ft000601_1151_1200S113101H.fits 
 40 -- ft000601_1151_1200S113301H.fits 
 41 -- ft000601_1151_1200S113501H.fits 
 42 -- ft000601_1151_1200S113901H.fits 
 43 -- ft000601_1151_1200S114101H.fits 
 44 -- ft000601_1151_1200S114701H.fits 
 45 -- ft000601_1151_1200S115101H.fits 
 46 -- ft000601_1151_1200S115301H.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200S100101H.fits 
 2 -- ft000601_1151_1200S100501H.fits 
 3 -- ft000601_1151_1200S100801H.fits 
 4 -- ft000601_1151_1200S101201H.fits 
 5 -- ft000601_1151_1200S101301H.fits 
 6 -- ft000601_1151_1200S101401H.fits 
 7 -- ft000601_1151_1200S101801H.fits 
 8 -- ft000601_1151_1200S102201H.fits 
 9 -- ft000601_1151_1200S103101H.fits 
 10 -- ft000601_1151_1200S103301H.fits 
 11 -- ft000601_1151_1200S103501H.fits 
 12 -- ft000601_1151_1200S103701H.fits 
 13 -- ft000601_1151_1200S104101H.fits 
 14 -- ft000601_1151_1200S104501H.fits 
 15 -- ft000601_1151_1200S104901H.fits 
 16 -- ft000601_1151_1200S105301H.fits 
 17 -- ft000601_1151_1200S105701H.fits 
 18 -- ft000601_1151_1200S106201H.fits 
 19 -- ft000601_1151_1200S106701H.fits 
 20 -- ft000601_1151_1200S107801H.fits 
 21 -- ft000601_1151_1200S108001H.fits 
 22 -- ft000601_1151_1200S108201H.fits 
 23 -- ft000601_1151_1200S108401H.fits 
 24 -- ft000601_1151_1200S108601H.fits 
 25 -- ft000601_1151_1200S109001H.fits 
 26 -- ft000601_1151_1200S109201H.fits 
 27 -- ft000601_1151_1200S109401H.fits 
 28 -- ft000601_1151_1200S109801H.fits 
 29 -- ft000601_1151_1200S110201H.fits 
 30 -- ft000601_1151_1200S110601H.fits 
 31 -- ft000601_1151_1200S111001H.fits 
 32 -- ft000601_1151_1200S111401H.fits 
 33 -- ft000601_1151_1200S111601H.fits 
 34 -- ft000601_1151_1200S112001H.fits 
 35 -- ft000601_1151_1200S112301H.fits 
 36 -- ft000601_1151_1200S112501H.fits 
 37 -- ft000601_1151_1200S112701H.fits 
 38 -- ft000601_1151_1200S112901H.fits 
 39 -- ft000601_1151_1200S113101H.fits 
 40 -- ft000601_1151_1200S113301H.fits 
 41 -- ft000601_1151_1200S113501H.fits 
 42 -- ft000601_1151_1200S113901H.fits 
 43 -- ft000601_1151_1200S114101H.fits 
 44 -- ft000601_1151_1200S114701H.fits 
 45 -- ft000601_1151_1200S115101H.fits 
 46 -- ft000601_1151_1200S115301H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000s100201m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  56  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 56 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200S100201M.fits 
 2 -- ft000601_1151_1200S100401M.fits 
 3 -- ft000601_1151_1200S100601M.fits 
 4 -- ft000601_1151_1200S100901M.fits 
 5 -- ft000601_1151_1200S101101M.fits 
 6 -- ft000601_1151_1200S101501M.fits 
 7 -- ft000601_1151_1200S101701M.fits 
 8 -- ft000601_1151_1200S101901M.fits 
 9 -- ft000601_1151_1200S102101M.fits 
 10 -- ft000601_1151_1200S102301M.fits 
 11 -- ft000601_1151_1200S102501M.fits 
 12 -- ft000601_1151_1200S102701M.fits 
 13 -- ft000601_1151_1200S102901M.fits 
 14 -- ft000601_1151_1200S103201M.fits 
 15 -- ft000601_1151_1200S103401M.fits 
 16 -- ft000601_1151_1200S103801M.fits 
 17 -- ft000601_1151_1200S104001M.fits 
 18 -- ft000601_1151_1200S105001M.fits 
 19 -- ft000601_1151_1200S105201M.fits 
 20 -- ft000601_1151_1200S105401M.fits 
 21 -- ft000601_1151_1200S106101M.fits 
 22 -- ft000601_1151_1200S106601M.fits 
 23 -- ft000601_1151_1200S106801M.fits 
 24 -- ft000601_1151_1200S107001M.fits 
 25 -- ft000601_1151_1200S107201M.fits 
 26 -- ft000601_1151_1200S107401M.fits 
 27 -- ft000601_1151_1200S107601M.fits 
 28 -- ft000601_1151_1200S107901M.fits 
 29 -- ft000601_1151_1200S108101M.fits 
 30 -- ft000601_1151_1200S108301M.fits 
 31 -- ft000601_1151_1200S108501M.fits 
 32 -- ft000601_1151_1200S108701M.fits 
 33 -- ft000601_1151_1200S108901M.fits 
 34 -- ft000601_1151_1200S109101M.fits 
 35 -- ft000601_1151_1200S109501M.fits 
 36 -- ft000601_1151_1200S109701M.fits 
 37 -- ft000601_1151_1200S109901M.fits 
 38 -- ft000601_1151_1200S110301M.fits 
 39 -- ft000601_1151_1200S110501M.fits 
 40 -- ft000601_1151_1200S110701M.fits 
 41 -- ft000601_1151_1200S110901M.fits 
 42 -- ft000601_1151_1200S111101M.fits 
 43 -- ft000601_1151_1200S111301M.fits 
 44 -- ft000601_1151_1200S111501M.fits 
 45 -- ft000601_1151_1200S111701M.fits 
 46 -- ft000601_1151_1200S111901M.fits 
 47 -- ft000601_1151_1200S112101M.fits 
 48 -- ft000601_1151_1200S112401M.fits 
 49 -- ft000601_1151_1200S112801M.fits 
 50 -- ft000601_1151_1200S113001M.fits 
 51 -- ft000601_1151_1200S113201M.fits 
 52 -- ft000601_1151_1200S113401M.fits 
 53 -- ft000601_1151_1200S114501M.fits 
 54 -- ft000601_1151_1200S114801M.fits 
 55 -- ft000601_1151_1200S115001M.fits 
 56 -- ft000601_1151_1200S115201M.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200S100201M.fits 
 2 -- ft000601_1151_1200S100401M.fits 
 3 -- ft000601_1151_1200S100601M.fits 
 4 -- ft000601_1151_1200S100901M.fits 
 5 -- ft000601_1151_1200S101101M.fits 
 6 -- ft000601_1151_1200S101501M.fits 
 7 -- ft000601_1151_1200S101701M.fits 
 8 -- ft000601_1151_1200S101901M.fits 
 9 -- ft000601_1151_1200S102101M.fits 
 10 -- ft000601_1151_1200S102301M.fits 
 11 -- ft000601_1151_1200S102501M.fits 
 12 -- ft000601_1151_1200S102701M.fits 
 13 -- ft000601_1151_1200S102901M.fits 
 14 -- ft000601_1151_1200S103201M.fits 
 15 -- ft000601_1151_1200S103401M.fits 
 16 -- ft000601_1151_1200S103801M.fits 
 17 -- ft000601_1151_1200S104001M.fits 
 18 -- ft000601_1151_1200S105001M.fits 
 19 -- ft000601_1151_1200S105201M.fits 
 20 -- ft000601_1151_1200S105401M.fits 
 21 -- ft000601_1151_1200S106101M.fits 
 22 -- ft000601_1151_1200S106601M.fits 
 23 -- ft000601_1151_1200S106801M.fits 
 24 -- ft000601_1151_1200S107001M.fits 
 25 -- ft000601_1151_1200S107201M.fits 
 26 -- ft000601_1151_1200S107401M.fits 
 27 -- ft000601_1151_1200S107601M.fits 
 28 -- ft000601_1151_1200S107901M.fits 
 29 -- ft000601_1151_1200S108101M.fits 
 30 -- ft000601_1151_1200S108301M.fits 
 31 -- ft000601_1151_1200S108501M.fits 
 32 -- ft000601_1151_1200S108701M.fits 
 33 -- ft000601_1151_1200S108901M.fits 
 34 -- ft000601_1151_1200S109101M.fits 
 35 -- ft000601_1151_1200S109501M.fits 
 36 -- ft000601_1151_1200S109701M.fits 
 37 -- ft000601_1151_1200S109901M.fits 
 38 -- ft000601_1151_1200S110301M.fits 
 39 -- ft000601_1151_1200S110501M.fits 
 40 -- ft000601_1151_1200S110701M.fits 
 41 -- ft000601_1151_1200S110901M.fits 
 42 -- ft000601_1151_1200S111101M.fits 
 43 -- ft000601_1151_1200S111301M.fits 
 44 -- ft000601_1151_1200S111501M.fits 
 45 -- ft000601_1151_1200S111701M.fits 
 46 -- ft000601_1151_1200S111901M.fits 
 47 -- ft000601_1151_1200S112101M.fits 
 48 -- ft000601_1151_1200S112401M.fits 
 49 -- ft000601_1151_1200S112801M.fits 
 50 -- ft000601_1151_1200S113001M.fits 
 51 -- ft000601_1151_1200S113201M.fits 
 52 -- ft000601_1151_1200S113401M.fits 
 53 -- ft000601_1151_1200S114501M.fits 
 54 -- ft000601_1151_1200S114801M.fits 
 55 -- ft000601_1151_1200S115001M.fits 
 56 -- ft000601_1151_1200S115201M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000s100301l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  31  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 31 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200S101601L.fits 
 2 -- ft000601_1151_1200S102001L.fits 
 3 -- ft000601_1151_1200S102401L.fits 
 4 -- ft000601_1151_1200S102801L.fits 
 5 -- ft000601_1151_1200S103001L.fits 
 6 -- ft000601_1151_1200S103601L.fits 
 7 -- ft000601_1151_1200S103901L.fits 
 8 -- ft000601_1151_1200S104201L.fits 
 9 -- ft000601_1151_1200S104401L.fits 
 10 -- ft000601_1151_1200S104601L.fits 
 11 -- ft000601_1151_1200S104801L.fits 
 12 -- ft000601_1151_1200S105801L.fits 
 13 -- ft000601_1151_1200S106001L.fits 
 14 -- ft000601_1151_1200S106301L.fits 
 15 -- ft000601_1151_1200S106501L.fits 
 16 -- ft000601_1151_1200S106901L.fits 
 17 -- ft000601_1151_1200S107101L.fits 
 18 -- ft000601_1151_1200S107301L.fits 
 19 -- ft000601_1151_1200S107501L.fits 
 20 -- ft000601_1151_1200S107701L.fits 
 21 -- ft000601_1151_1200S111201L.fits 
 22 -- ft000601_1151_1200S111801L.fits 
 23 -- ft000601_1151_1200S112201L.fits 
 24 -- ft000601_1151_1200S113601L.fits 
 25 -- ft000601_1151_1200S113801L.fits 
 26 -- ft000601_1151_1200S114001L.fits 
 27 -- ft000601_1151_1200S114201L.fits 
 28 -- ft000601_1151_1200S114401L.fits 
 29 -- ft000601_1151_1200S114601L.fits 
 30 -- ft000601_1151_1200S115401L.fits 
 31 -- ft000601_1151_1200S115601L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200S101601L.fits 
 2 -- ft000601_1151_1200S102001L.fits 
 3 -- ft000601_1151_1200S102401L.fits 
 4 -- ft000601_1151_1200S102801L.fits 
 5 -- ft000601_1151_1200S103001L.fits 
 6 -- ft000601_1151_1200S103601L.fits 
 7 -- ft000601_1151_1200S103901L.fits 
 8 -- ft000601_1151_1200S104201L.fits 
 9 -- ft000601_1151_1200S104401L.fits 
 10 -- ft000601_1151_1200S104601L.fits 
 11 -- ft000601_1151_1200S104801L.fits 
 12 -- ft000601_1151_1200S105801L.fits 
 13 -- ft000601_1151_1200S106001L.fits 
 14 -- ft000601_1151_1200S106301L.fits 
 15 -- ft000601_1151_1200S106501L.fits 
 16 -- ft000601_1151_1200S106901L.fits 
 17 -- ft000601_1151_1200S107101L.fits 
 18 -- ft000601_1151_1200S107301L.fits 
 19 -- ft000601_1151_1200S107501L.fits 
 20 -- ft000601_1151_1200S107701L.fits 
 21 -- ft000601_1151_1200S111201L.fits 
 22 -- ft000601_1151_1200S111801L.fits 
 23 -- ft000601_1151_1200S112201L.fits 
 24 -- ft000601_1151_1200S113601L.fits 
 25 -- ft000601_1151_1200S113801L.fits 
 26 -- ft000601_1151_1200S114001L.fits 
 27 -- ft000601_1151_1200S114201L.fits 
 28 -- ft000601_1151_1200S114401L.fits 
 29 -- ft000601_1151_1200S114601L.fits 
 30 -- ft000601_1151_1200S115401L.fits 
 31 -- ft000601_1151_1200S115601L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 272 events ft000601_1151_1200S104301L.fits ft000601_1151_1200S104701L.fits ft000601_1151_1200S105901L.fits ft000601_1151_1200S114301L.fits ft000601_1151_1200S115501L.fits
-> Ignoring the following files containing 176 events ft000601_1151_1200S109301H.fits
-> Ignoring the following files containing 82 events ft000601_1151_1200S100701M.fits ft000601_1151_1200S101001M.fits ft000601_1151_1200S102601M.fits ft000601_1151_1200S105101M.fits ft000601_1151_1200S110001M.fits ft000601_1151_1200S110401M.fits
-> Ignoring the following files containing 9 events ft000601_1151_1200S112601H.fits
-> Grouping g2 event files
-> stdout output from group_event_files

1 ft000601_1151_1200G200170H.fits 234304
1 ft000601_1151_1200G200970H.fits 234304
1 ft000601_1151_1200G201770H.fits 234304
1 ft000601_1151_1200G202470H.fits 234304
1 ft000601_1151_1200G202570H.fits 234304
1 ft000601_1151_1200G203070H.fits 234304
1 ft000601_1151_1200G203770H.fits 234304
1 ft000601_1151_1200G205170H.fits 234304
1 ft000601_1151_1200G205570H.fits 234304
1 ft000601_1151_1200G206870H.fits 234304
1 ft000601_1151_1200G207070H.fits 234304
1 ft000601_1151_1200G207270H.fits 234304
1 ft000601_1151_1200G207470H.fits 234304
1 ft000601_1151_1200G208270H.fits 234304
1 ft000601_1151_1200G208770H.fits 234304
1 ft000601_1151_1200G209070H.fits 234304
1 ft000601_1151_1200G209970H.fits 234304
1 ft000601_1151_1200G210570H.fits 234304
1 ft000601_1151_1200G211370H.fits 234304
1 ft000601_1151_1200G211470H.fits 234304
1 ft000601_1151_1200G212670H.fits 234304
1 ft000601_1151_1200G213570H.fits 234304
1 ft000601_1151_1200G213670H.fits 234304
1 ft000601_1151_1200G214570H.fits 234304
1 ft000601_1151_1200G215370H.fits 234304
1 ft000601_1151_1200G217670H.fits 234304
1 ft000601_1151_1200G217970H.fits 234304
1 ft000601_1151_1200G218270H.fits 234304
1 ft000601_1151_1200G218870H.fits 234304
1 ft000601_1151_1200G219470H.fits 234304
1 ft000601_1151_1200G220070H.fits 234304
1 ft000601_1151_1200G220670H.fits 234304
1 ft000601_1151_1200G221870H.fits 234304
1 ft000601_1151_1200G222470H.fits 234304
1 ft000601_1151_1200G223070H.fits 234304
1 ft000601_1151_1200G223170H.fits 234304
1 ft000601_1151_1200G223870H.fits 234304
1 ft000601_1151_1200G224670H.fits 234304
1 ft000601_1151_1200G225470H.fits 234304
1 ft000601_1151_1200G225570H.fits 234304
1 ft000601_1151_1200G226370H.fits 234304
1 ft000601_1151_1200G226470H.fits 234304
1 ft000601_1151_1200G227370H.fits 234304
1 ft000601_1151_1200G228570H.fits 234304
1 ft000601_1151_1200G229570H.fits 234304
1 ft000601_1151_1200G230870H.fits 234304
1 ft000601_1151_1200G231170H.fits 234304
1 ft000601_1151_1200G232370H.fits 234304
1 ft000601_1151_1200G232770H.fits 234304
1 ft000601_1151_1200G232970H.fits 234304
1 ft000601_1151_1200G233570H.fits 234304
1 ft000601_1151_1200G234170H.fits 234304
1 ft000601_1151_1200G234770H.fits 234304
1 ft000601_1151_1200G235970H.fits 234304
1 ft000601_1151_1200G236570H.fits 234304
1 ft000601_1151_1200G237670H.fits 234304
1 ft000601_1151_1200G238270H.fits 234304
1 ft000601_1151_1200G239670H.fits 234304
1 ft000601_1151_1200G240870H.fits 234304
1 ft000601_1151_1200G241370H.fits 234304
2 ft000601_1151_1200G202970M.fits 159863
2 ft000601_1151_1200G203870M.fits 159863
2 ft000601_1151_1200G204670M.fits 159863
2 ft000601_1151_1200G205070M.fits 159863
2 ft000601_1151_1200G205270M.fits 159863
2 ft000601_1151_1200G205470M.fits 159863
2 ft000601_1151_1200G205670M.fits 159863
2 ft000601_1151_1200G206170M.fits 159863
2 ft000601_1151_1200G206670M.fits 159863
2 ft000601_1151_1200G206970M.fits 159863
2 ft000601_1151_1200G207370M.fits 159863
2 ft000601_1151_1200G208370M.fits 159863
2 ft000601_1151_1200G208670M.fits 159863
2 ft000601_1151_1200G214170M.fits 159863
2 ft000601_1151_1200G214970M.fits 159863
2 ft000601_1151_1200G215570M.fits 159863
2 ft000601_1151_1200G216170M.fits 159863
2 ft000601_1151_1200G216770M.fits 159863
2 ft000601_1151_1200G216970M.fits 159863
2 ft000601_1151_1200G217470M.fits 159863
2 ft000601_1151_1200G217870M.fits 159863
2 ft000601_1151_1200G218170M.fits 159863
2 ft000601_1151_1200G219070M.fits 159863
2 ft000601_1151_1200G220270M.fits 159863
2 ft000601_1151_1200G222070M.fits 159863
2 ft000601_1151_1200G229170M.fits 159863
2 ft000601_1151_1200G229770M.fits 159863
2 ft000601_1151_1200G230470M.fits 159863
2 ft000601_1151_1200G231070M.fits 159863
2 ft000601_1151_1200G231370M.fits 159863
2 ft000601_1151_1200G231970M.fits 159863
2 ft000601_1151_1200G232570M.fits 159863
2 ft000601_1151_1200G233170M.fits 159863
2 ft000601_1151_1200G233770M.fits 159863
2 ft000601_1151_1200G234370M.fits 159863
2 ft000601_1151_1200G236170M.fits 159863
2 ft000601_1151_1200G239170M.fits 159863
2 ft000601_1151_1200G240970M.fits 159863
3 ft000601_1151_1200G204270L.fits 92921
3 ft000601_1151_1200G205370L.fits 92921
3 ft000601_1151_1200G205770L.fits 92921
3 ft000601_1151_1200G206270L.fits 92921
3 ft000601_1151_1200G206770L.fits 92921
3 ft000601_1151_1200G208570L.fits 92921
3 ft000601_1151_1200G209570L.fits 92921
3 ft000601_1151_1200G210470L.fits 92921
3 ft000601_1151_1200G214070L.fits 92921
3 ft000601_1151_1200G214870L.fits 92921
3 ft000601_1151_1200G216070L.fits 92921
3 ft000601_1151_1200G216370L.fits 92921
3 ft000601_1151_1200G216870L.fits 92921
3 ft000601_1151_1200G217070L.fits 92921
3 ft000601_1151_1200G217570L.fits 92921
3 ft000601_1151_1200G230070L.fits 92921
3 ft000601_1151_1200G231570L.fits 92921
3 ft000601_1151_1200G232670L.fits 92921
3 ft000601_1151_1200G237870L.fits 92921
3 ft000601_1151_1200G239270L.fits 92921
3 ft000601_1151_1200G241970L.fits 92921
4 ft000601_1151_1200G204570M.fits 3097
4 ft000601_1151_1200G206070M.fits 3097
4 ft000601_1151_1200G206570M.fits 3097
4 ft000601_1151_1200G215470M.fits 3097
4 ft000601_1151_1200G216670M.fits 3097
4 ft000601_1151_1200G217370M.fits 3097
4 ft000601_1151_1200G217770M.fits 3097
4 ft000601_1151_1200G218070M.fits 3097
4 ft000601_1151_1200G218970M.fits 3097
4 ft000601_1151_1200G220170M.fits 3097
4 ft000601_1151_1200G221970M.fits 3097
4 ft000601_1151_1200G229670M.fits 3097
4 ft000601_1151_1200G230370M.fits 3097
4 ft000601_1151_1200G230970M.fits 3097
4 ft000601_1151_1200G231270M.fits 3097
4 ft000601_1151_1200G231870M.fits 3097
4 ft000601_1151_1200G232470M.fits 3097
4 ft000601_1151_1200G233070M.fits 3097
4 ft000601_1151_1200G233670M.fits 3097
4 ft000601_1151_1200G234270M.fits 3097
4 ft000601_1151_1200G236070M.fits 3097
5 ft000601_1151_1200G208470L.fits 2051
5 ft000601_1151_1200G216270L.fits 2051
5 ft000601_1151_1200G231470L.fits 2051
5 ft000601_1151_1200G237770L.fits 2051
6 ft000601_1151_1200G209470L.fits 532
6 ft000601_1151_1200G215970L.fits 532
6 ft000601_1151_1200G241870L.fits 532
7 ft000601_1151_1200G204170L.fits 263
7 ft000601_1151_1200G210370L.fits 263
7 ft000601_1151_1200G213970L.fits 263
7 ft000601_1151_1200G214770L.fits 263
7 ft000601_1151_1200G229970L.fits 263
8 ft000601_1151_1200G204770M.fits 97
8 ft000601_1151_1200G204870M.fits 97
8 ft000601_1151_1200G204970M.fits 97
9 ft000601_1151_1200G202370H.fits 79
9 ft000601_1151_1200G203670H.fits 79
9 ft000601_1151_1200G213370H.fits 79
9 ft000601_1151_1200G223670H.fits 79
9 ft000601_1151_1200G225370H.fits 79
9 ft000601_1151_1200G227270H.fits 79
10 ft000601_1151_1200G209870H.fits 71
10 ft000601_1151_1200G214470H.fits 71
10 ft000601_1151_1200G215270H.fits 71
10 ft000601_1151_1200G219370H.fits 71
10 ft000601_1151_1200G220570H.fits 71
10 ft000601_1151_1200G222370H.fits 71
10 ft000601_1151_1200G229470H.fits 71
10 ft000601_1151_1200G230770H.fits 71
10 ft000601_1151_1200G232270H.fits 71
10 ft000601_1151_1200G233470H.fits 71
10 ft000601_1151_1200G234070H.fits 71
10 ft000601_1151_1200G234670H.fits 71
10 ft000601_1151_1200G236470H.fits 71
10 ft000601_1151_1200G238170H.fits 71
10 ft000601_1151_1200G239570H.fits 71
10 ft000601_1151_1200G241270H.fits 71
11 ft000601_1151_1200G200870H.fits 68
11 ft000601_1151_1200G201670H.fits 68
11 ft000601_1151_1200G208170H.fits 68
11 ft000601_1151_1200G211270H.fits 68
11 ft000601_1151_1200G212570H.fits 68
11 ft000601_1151_1200G218770H.fits 68
11 ft000601_1151_1200G219970H.fits 68
11 ft000601_1151_1200G221770H.fits 68
11 ft000601_1151_1200G222970H.fits 68
11 ft000601_1151_1200G224570H.fits 68
11 ft000601_1151_1200G226270H.fits 68
11 ft000601_1151_1200G228470H.fits 68
11 ft000601_1151_1200G235870H.fits 68
11 ft000601_1151_1200G240770H.fits 68
12 ft000601_1151_1200G229070M.fits 43
12 ft000601_1151_1200G239070M.fits 43
13 ft000601_1151_1200G216470M.fits 34
14 ft000601_1151_1200G217170M.fits 32
15 ft000601_1151_1200G216570M.fits 31
16 ft000601_1151_1200G217270M.fits 30
17 ft000601_1151_1200G200770H.fits 28
17 ft000601_1151_1200G201570H.fits 28
17 ft000601_1151_1200G208070H.fits 28
17 ft000601_1151_1200G211170H.fits 28
17 ft000601_1151_1200G212470H.fits 28
17 ft000601_1151_1200G218670H.fits 28
17 ft000601_1151_1200G219870H.fits 28
17 ft000601_1151_1200G221670H.fits 28
17 ft000601_1151_1200G224470H.fits 28
17 ft000601_1151_1200G226170H.fits 28
17 ft000601_1151_1200G228370H.fits 28
17 ft000601_1151_1200G235770H.fits 28
17 ft000601_1151_1200G237470H.fits 28
17 ft000601_1151_1200G240670H.fits 28
18 ft000601_1151_1200G204370M.fits 27
19 ft000601_1151_1200G230270M.fits 25
20 ft000601_1151_1200G206470M.fits 23
21 ft000601_1151_1200G204470M.fits 22
22 ft000601_1151_1200G206370M.fits 21
23 ft000601_1151_1200G205970M.fits 20
24 ft000601_1151_1200G205870M.fits 15
25 ft000601_1151_1200G213270H.fits 13
25 ft000601_1151_1200G227170H.fits 13
26 ft000601_1151_1200G230170M.fits 12
27 ft000601_1151_1200G200270H.fits 11
27 ft000601_1151_1200G201070H.fits 11
27 ft000601_1151_1200G218370H.fits 11
27 ft000601_1151_1200G220770H.fits 11
27 ft000601_1151_1200G223970H.fits 11
27 ft000601_1151_1200G225670H.fits 11
27 ft000601_1151_1200G228670H.fits 11
27 ft000601_1151_1200G234870H.fits 11
28 ft000601_1151_1200G214370H.fits 11
28 ft000601_1151_1200G233370H.fits 11
29 ft000601_1151_1200G215670M.fits 11
30 ft000601_1151_1200G229270H.fits 11
31 ft000601_1151_1200G239370H.fits 11
32 ft000601_1151_1200G214270H.fits 8
32 ft000601_1151_1200G233270H.fits 8
33 ft000601_1151_1200G239470H.fits 8
34 ft000601_1151_1200G221570H.fits 7
34 ft000601_1151_1200G226070H.fits 7
34 ft000601_1151_1200G235670H.fits 7
34 ft000601_1151_1200G240570H.fits 7
35 ft000601_1151_1200G222170H.fits 7
36 ft000601_1151_1200G231770M.fits 7
37 ft000601_1151_1200G238070H.fits 7
38 ft000601_1151_1200G229370H.fits 6
39 ft000601_1151_1200G231670M.fits 6
40 ft000601_1151_1200G203570H.fits 5
41 ft000601_1151_1200G222270H.fits 5
42 ft000601_1151_1200G223270H.fits 5
42 ft000601_1151_1200G226570H.fits 5
43 ft000601_1151_1200G223570H.fits 5
44 ft000601_1151_1200G230670H.fits 5
45 ft000601_1151_1200G241070H.fits 5
46 ft000601_1151_1200G209670H.fits 4
47 ft000601_1151_1200G213470H.fits 4
47 ft000601_1151_1200G223770H.fits 4
48 ft000601_1151_1200G219270H.fits 4
49 ft000601_1151_1200G220370H.fits 4
50 ft000601_1151_1200G232870H.fits 4
51 ft000601_1151_1200G233970H.fits 4
52 ft000601_1151_1200G234570H.fits 4
53 ft000601_1151_1200G241170H.fits 4
54 ft000601_1151_1200G202270H.fits 3
55 ft000601_1151_1200G202870M.fits 3
56 ft000601_1151_1200G207170H.fits 3
57 ft000601_1151_1200G215070H.fits 3
58 ft000601_1151_1200G220470H.fits 3
59 ft000601_1151_1200G232070H.fits 3
60 ft000601_1151_1200G232170H.fits 3
61 ft000601_1151_1200G233870H.fits 3
62 ft000601_1151_1200G237970H.fits 3
63 ft000601_1151_1200G203470H.fits 2
64 ft000601_1151_1200G234470H.fits 2
65 ft000601_1151_1200G201870H.fits 1
66 ft000601_1151_1200G203170H.fits 1
67 ft000601_1151_1200G209770H.fits 1
68 ft000601_1151_1200G213170H.fits 1
69 ft000601_1151_1200G215170H.fits 1
70 ft000601_1151_1200G219170H.fits 1
71 ft000601_1151_1200G230570H.fits 1
72 ft000601_1151_1200G236370H.fits 1

-> Creating ad78011000g200170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  60  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 60 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G200170H.fits 
 2 -- ft000601_1151_1200G200970H.fits 
 3 -- ft000601_1151_1200G201770H.fits 
 4 -- ft000601_1151_1200G202470H.fits 
 5 -- ft000601_1151_1200G202570H.fits 
 6 -- ft000601_1151_1200G203070H.fits 
 7 -- ft000601_1151_1200G203770H.fits 
 8 -- ft000601_1151_1200G205170H.fits 
 9 -- ft000601_1151_1200G205570H.fits 
 10 -- ft000601_1151_1200G206870H.fits 
 11 -- ft000601_1151_1200G207070H.fits 
 12 -- ft000601_1151_1200G207270H.fits 
 13 -- ft000601_1151_1200G207470H.fits 
 14 -- ft000601_1151_1200G208270H.fits 
 15 -- ft000601_1151_1200G208770H.fits 
 16 -- ft000601_1151_1200G209070H.fits 
 17 -- ft000601_1151_1200G209970H.fits 
 18 -- ft000601_1151_1200G210570H.fits 
 19 -- ft000601_1151_1200G211370H.fits 
 20 -- ft000601_1151_1200G211470H.fits 
 21 -- ft000601_1151_1200G212670H.fits 
 22 -- ft000601_1151_1200G213570H.fits 
 23 -- ft000601_1151_1200G213670H.fits 
 24 -- ft000601_1151_1200G214570H.fits 
 25 -- ft000601_1151_1200G215370H.fits 
 26 -- ft000601_1151_1200G217670H.fits 
 27 -- ft000601_1151_1200G217970H.fits 
 28 -- ft000601_1151_1200G218270H.fits 
 29 -- ft000601_1151_1200G218870H.fits 
 30 -- ft000601_1151_1200G219470H.fits 
 31 -- ft000601_1151_1200G220070H.fits 
 32 -- ft000601_1151_1200G220670H.fits 
 33 -- ft000601_1151_1200G221870H.fits 
 34 -- ft000601_1151_1200G222470H.fits 
 35 -- ft000601_1151_1200G223070H.fits 
 36 -- ft000601_1151_1200G223170H.fits 
 37 -- ft000601_1151_1200G223870H.fits 
 38 -- ft000601_1151_1200G224670H.fits 
 39 -- ft000601_1151_1200G225470H.fits 
 40 -- ft000601_1151_1200G225570H.fits 
 41 -- ft000601_1151_1200G226370H.fits 
 42 -- ft000601_1151_1200G226470H.fits 
 43 -- ft000601_1151_1200G227370H.fits 
 44 -- ft000601_1151_1200G228570H.fits 
 45 -- ft000601_1151_1200G229570H.fits 
 46 -- ft000601_1151_1200G230870H.fits 
 47 -- ft000601_1151_1200G231170H.fits 
 48 -- ft000601_1151_1200G232370H.fits 
 49 -- ft000601_1151_1200G232770H.fits 
 50 -- ft000601_1151_1200G232970H.fits 
 51 -- ft000601_1151_1200G233570H.fits 
 52 -- ft000601_1151_1200G234170H.fits 
 53 -- ft000601_1151_1200G234770H.fits 
 54 -- ft000601_1151_1200G235970H.fits 
 55 -- ft000601_1151_1200G236570H.fits 
 56 -- ft000601_1151_1200G237670H.fits 
 57 -- ft000601_1151_1200G238270H.fits 
 58 -- ft000601_1151_1200G239670H.fits 
 59 -- ft000601_1151_1200G240870H.fits 
 60 -- ft000601_1151_1200G241370H.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G200170H.fits 
 2 -- ft000601_1151_1200G200970H.fits 
 3 -- ft000601_1151_1200G201770H.fits 
 4 -- ft000601_1151_1200G202470H.fits 
 5 -- ft000601_1151_1200G202570H.fits 
 6 -- ft000601_1151_1200G203070H.fits 
 7 -- ft000601_1151_1200G203770H.fits 
 8 -- ft000601_1151_1200G205170H.fits 
 9 -- ft000601_1151_1200G205570H.fits 
 10 -- ft000601_1151_1200G206870H.fits 
 11 -- ft000601_1151_1200G207070H.fits 
 12 -- ft000601_1151_1200G207270H.fits 
 13 -- ft000601_1151_1200G207470H.fits 
 14 -- ft000601_1151_1200G208270H.fits 
 15 -- ft000601_1151_1200G208770H.fits 
 16 -- ft000601_1151_1200G209070H.fits 
 17 -- ft000601_1151_1200G209970H.fits 
 18 -- ft000601_1151_1200G210570H.fits 
 19 -- ft000601_1151_1200G211370H.fits 
 20 -- ft000601_1151_1200G211470H.fits 
 21 -- ft000601_1151_1200G212670H.fits 
 22 -- ft000601_1151_1200G213570H.fits 
 23 -- ft000601_1151_1200G213670H.fits 
 24 -- ft000601_1151_1200G214570H.fits 
 25 -- ft000601_1151_1200G215370H.fits 
 26 -- ft000601_1151_1200G217670H.fits 
 27 -- ft000601_1151_1200G217970H.fits 
 28 -- ft000601_1151_1200G218270H.fits 
 29 -- ft000601_1151_1200G218870H.fits 
 30 -- ft000601_1151_1200G219470H.fits 
 31 -- ft000601_1151_1200G220070H.fits 
 32 -- ft000601_1151_1200G220670H.fits 
 33 -- ft000601_1151_1200G221870H.fits 
 34 -- ft000601_1151_1200G222470H.fits 
 35 -- ft000601_1151_1200G223070H.fits 
 36 -- ft000601_1151_1200G223170H.fits 
 37 -- ft000601_1151_1200G223870H.fits 
 38 -- ft000601_1151_1200G224670H.fits 
 39 -- ft000601_1151_1200G225470H.fits 
 40 -- ft000601_1151_1200G225570H.fits 
 41 -- ft000601_1151_1200G226370H.fits 
 42 -- ft000601_1151_1200G226470H.fits 
 43 -- ft000601_1151_1200G227370H.fits 
 44 -- ft000601_1151_1200G228570H.fits 
 45 -- ft000601_1151_1200G229570H.fits 
 46 -- ft000601_1151_1200G230870H.fits 
 47 -- ft000601_1151_1200G231170H.fits 
 48 -- ft000601_1151_1200G232370H.fits 
 49 -- ft000601_1151_1200G232770H.fits 
 50 -- ft000601_1151_1200G232970H.fits 
 51 -- ft000601_1151_1200G233570H.fits 
 52 -- ft000601_1151_1200G234170H.fits 
 53 -- ft000601_1151_1200G234770H.fits 
 54 -- ft000601_1151_1200G235970H.fits 
 55 -- ft000601_1151_1200G236570H.fits 
 56 -- ft000601_1151_1200G237670H.fits 
 57 -- ft000601_1151_1200G238270H.fits 
 58 -- ft000601_1151_1200G239670H.fits 
 59 -- ft000601_1151_1200G240870H.fits 
 60 -- ft000601_1151_1200G241370H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g200270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  38  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 38 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G202970M.fits 
 2 -- ft000601_1151_1200G203870M.fits 
 3 -- ft000601_1151_1200G204670M.fits 
 4 -- ft000601_1151_1200G205070M.fits 
 5 -- ft000601_1151_1200G205270M.fits 
 6 -- ft000601_1151_1200G205470M.fits 
 7 -- ft000601_1151_1200G205670M.fits 
 8 -- ft000601_1151_1200G206170M.fits 
 9 -- ft000601_1151_1200G206670M.fits 
 10 -- ft000601_1151_1200G206970M.fits 
 11 -- ft000601_1151_1200G207370M.fits 
 12 -- ft000601_1151_1200G208370M.fits 
 13 -- ft000601_1151_1200G208670M.fits 
 14 -- ft000601_1151_1200G214170M.fits 
 15 -- ft000601_1151_1200G214970M.fits 
 16 -- ft000601_1151_1200G215570M.fits 
 17 -- ft000601_1151_1200G216170M.fits 
 18 -- ft000601_1151_1200G216770M.fits 
 19 -- ft000601_1151_1200G216970M.fits 
 20 -- ft000601_1151_1200G217470M.fits 
 21 -- ft000601_1151_1200G217870M.fits 
 22 -- ft000601_1151_1200G218170M.fits 
 23 -- ft000601_1151_1200G219070M.fits 
 24 -- ft000601_1151_1200G220270M.fits 
 25 -- ft000601_1151_1200G222070M.fits 
 26 -- ft000601_1151_1200G229170M.fits 
 27 -- ft000601_1151_1200G229770M.fits 
 28 -- ft000601_1151_1200G230470M.fits 
 29 -- ft000601_1151_1200G231070M.fits 
 30 -- ft000601_1151_1200G231370M.fits 
 31 -- ft000601_1151_1200G231970M.fits 
 32 -- ft000601_1151_1200G232570M.fits 
 33 -- ft000601_1151_1200G233170M.fits 
 34 -- ft000601_1151_1200G233770M.fits 
 35 -- ft000601_1151_1200G234370M.fits 
 36 -- ft000601_1151_1200G236170M.fits 
 37 -- ft000601_1151_1200G239170M.fits 
 38 -- ft000601_1151_1200G240970M.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G202970M.fits 
 2 -- ft000601_1151_1200G203870M.fits 
 3 -- ft000601_1151_1200G204670M.fits 
 4 -- ft000601_1151_1200G205070M.fits 
 5 -- ft000601_1151_1200G205270M.fits 
 6 -- ft000601_1151_1200G205470M.fits 
 7 -- ft000601_1151_1200G205670M.fits 
 8 -- ft000601_1151_1200G206170M.fits 
 9 -- ft000601_1151_1200G206670M.fits 
 10 -- ft000601_1151_1200G206970M.fits 
 11 -- ft000601_1151_1200G207370M.fits 
 12 -- ft000601_1151_1200G208370M.fits 
 13 -- ft000601_1151_1200G208670M.fits 
 14 -- ft000601_1151_1200G214170M.fits 
 15 -- ft000601_1151_1200G214970M.fits 
 16 -- ft000601_1151_1200G215570M.fits 
 17 -- ft000601_1151_1200G216170M.fits 
 18 -- ft000601_1151_1200G216770M.fits 
 19 -- ft000601_1151_1200G216970M.fits 
 20 -- ft000601_1151_1200G217470M.fits 
 21 -- ft000601_1151_1200G217870M.fits 
 22 -- ft000601_1151_1200G218170M.fits 
 23 -- ft000601_1151_1200G219070M.fits 
 24 -- ft000601_1151_1200G220270M.fits 
 25 -- ft000601_1151_1200G222070M.fits 
 26 -- ft000601_1151_1200G229170M.fits 
 27 -- ft000601_1151_1200G229770M.fits 
 28 -- ft000601_1151_1200G230470M.fits 
 29 -- ft000601_1151_1200G231070M.fits 
 30 -- ft000601_1151_1200G231370M.fits 
 31 -- ft000601_1151_1200G231970M.fits 
 32 -- ft000601_1151_1200G232570M.fits 
 33 -- ft000601_1151_1200G233170M.fits 
 34 -- ft000601_1151_1200G233770M.fits 
 35 -- ft000601_1151_1200G234370M.fits 
 36 -- ft000601_1151_1200G236170M.fits 
 37 -- ft000601_1151_1200G239170M.fits 
 38 -- ft000601_1151_1200G240970M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g200370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  21  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 21 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G204270L.fits 
 2 -- ft000601_1151_1200G205370L.fits 
 3 -- ft000601_1151_1200G205770L.fits 
 4 -- ft000601_1151_1200G206270L.fits 
 5 -- ft000601_1151_1200G206770L.fits 
 6 -- ft000601_1151_1200G208570L.fits 
 7 -- ft000601_1151_1200G209570L.fits 
 8 -- ft000601_1151_1200G210470L.fits 
 9 -- ft000601_1151_1200G214070L.fits 
 10 -- ft000601_1151_1200G214870L.fits 
 11 -- ft000601_1151_1200G216070L.fits 
 12 -- ft000601_1151_1200G216370L.fits 
 13 -- ft000601_1151_1200G216870L.fits 
 14 -- ft000601_1151_1200G217070L.fits 
 15 -- ft000601_1151_1200G217570L.fits 
 16 -- ft000601_1151_1200G230070L.fits 
 17 -- ft000601_1151_1200G231570L.fits 
 18 -- ft000601_1151_1200G232670L.fits 
 19 -- ft000601_1151_1200G237870L.fits 
 20 -- ft000601_1151_1200G239270L.fits 
 21 -- ft000601_1151_1200G241970L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G204270L.fits 
 2 -- ft000601_1151_1200G205370L.fits 
 3 -- ft000601_1151_1200G205770L.fits 
 4 -- ft000601_1151_1200G206270L.fits 
 5 -- ft000601_1151_1200G206770L.fits 
 6 -- ft000601_1151_1200G208570L.fits 
 7 -- ft000601_1151_1200G209570L.fits 
 8 -- ft000601_1151_1200G210470L.fits 
 9 -- ft000601_1151_1200G214070L.fits 
 10 -- ft000601_1151_1200G214870L.fits 
 11 -- ft000601_1151_1200G216070L.fits 
 12 -- ft000601_1151_1200G216370L.fits 
 13 -- ft000601_1151_1200G216870L.fits 
 14 -- ft000601_1151_1200G217070L.fits 
 15 -- ft000601_1151_1200G217570L.fits 
 16 -- ft000601_1151_1200G230070L.fits 
 17 -- ft000601_1151_1200G231570L.fits 
 18 -- ft000601_1151_1200G232670L.fits 
 19 -- ft000601_1151_1200G237870L.fits 
 20 -- ft000601_1151_1200G239270L.fits 
 21 -- ft000601_1151_1200G241970L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g200470m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  21  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 21 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G204570M.fits 
 2 -- ft000601_1151_1200G206070M.fits 
 3 -- ft000601_1151_1200G206570M.fits 
 4 -- ft000601_1151_1200G215470M.fits 
 5 -- ft000601_1151_1200G216670M.fits 
 6 -- ft000601_1151_1200G217370M.fits 
 7 -- ft000601_1151_1200G217770M.fits 
 8 -- ft000601_1151_1200G218070M.fits 
 9 -- ft000601_1151_1200G218970M.fits 
 10 -- ft000601_1151_1200G220170M.fits 
 11 -- ft000601_1151_1200G221970M.fits 
 12 -- ft000601_1151_1200G229670M.fits 
 13 -- ft000601_1151_1200G230370M.fits 
 14 -- ft000601_1151_1200G230970M.fits 
 15 -- ft000601_1151_1200G231270M.fits 
 16 -- ft000601_1151_1200G231870M.fits 
 17 -- ft000601_1151_1200G232470M.fits 
 18 -- ft000601_1151_1200G233070M.fits 
 19 -- ft000601_1151_1200G233670M.fits 
 20 -- ft000601_1151_1200G234270M.fits 
 21 -- ft000601_1151_1200G236070M.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G204570M.fits 
 2 -- ft000601_1151_1200G206070M.fits 
 3 -- ft000601_1151_1200G206570M.fits 
 4 -- ft000601_1151_1200G215470M.fits 
 5 -- ft000601_1151_1200G216670M.fits 
 6 -- ft000601_1151_1200G217370M.fits 
 7 -- ft000601_1151_1200G217770M.fits 
 8 -- ft000601_1151_1200G218070M.fits 
 9 -- ft000601_1151_1200G218970M.fits 
 10 -- ft000601_1151_1200G220170M.fits 
 11 -- ft000601_1151_1200G221970M.fits 
 12 -- ft000601_1151_1200G229670M.fits 
 13 -- ft000601_1151_1200G230370M.fits 
 14 -- ft000601_1151_1200G230970M.fits 
 15 -- ft000601_1151_1200G231270M.fits 
 16 -- ft000601_1151_1200G231870M.fits 
 17 -- ft000601_1151_1200G232470M.fits 
 18 -- ft000601_1151_1200G233070M.fits 
 19 -- ft000601_1151_1200G233670M.fits 
 20 -- ft000601_1151_1200G234270M.fits 
 21 -- ft000601_1151_1200G236070M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g200570l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G208470L.fits 
 2 -- ft000601_1151_1200G216270L.fits 
 3 -- ft000601_1151_1200G231470L.fits 
 4 -- ft000601_1151_1200G237770L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G208470L.fits 
 2 -- ft000601_1151_1200G216270L.fits 
 3 -- ft000601_1151_1200G231470L.fits 
 4 -- ft000601_1151_1200G237770L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g200670l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  3  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 3 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G209470L.fits 
 2 -- ft000601_1151_1200G215970L.fits 
 3 -- ft000601_1151_1200G241870L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G209470L.fits 
 2 -- ft000601_1151_1200G215970L.fits 
 3 -- ft000601_1151_1200G241870L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 263 events ft000601_1151_1200G204170L.fits ft000601_1151_1200G210370L.fits ft000601_1151_1200G213970L.fits ft000601_1151_1200G214770L.fits ft000601_1151_1200G229970L.fits
-> Ignoring the following files containing 97 events ft000601_1151_1200G204770M.fits ft000601_1151_1200G204870M.fits ft000601_1151_1200G204970M.fits
-> Ignoring the following files containing 79 events ft000601_1151_1200G202370H.fits ft000601_1151_1200G203670H.fits ft000601_1151_1200G213370H.fits ft000601_1151_1200G223670H.fits ft000601_1151_1200G225370H.fits ft000601_1151_1200G227270H.fits
-> Ignoring the following files containing 71 events ft000601_1151_1200G209870H.fits ft000601_1151_1200G214470H.fits ft000601_1151_1200G215270H.fits ft000601_1151_1200G219370H.fits ft000601_1151_1200G220570H.fits ft000601_1151_1200G222370H.fits ft000601_1151_1200G229470H.fits ft000601_1151_1200G230770H.fits ft000601_1151_1200G232270H.fits ft000601_1151_1200G233470H.fits ft000601_1151_1200G234070H.fits ft000601_1151_1200G234670H.fits ft000601_1151_1200G236470H.fits ft000601_1151_1200G238170H.fits ft000601_1151_1200G239570H.fits ft000601_1151_1200G241270H.fits
-> Ignoring the following files containing 68 events ft000601_1151_1200G200870H.fits ft000601_1151_1200G201670H.fits ft000601_1151_1200G208170H.fits ft000601_1151_1200G211270H.fits ft000601_1151_1200G212570H.fits ft000601_1151_1200G218770H.fits ft000601_1151_1200G219970H.fits ft000601_1151_1200G221770H.fits ft000601_1151_1200G222970H.fits ft000601_1151_1200G224570H.fits ft000601_1151_1200G226270H.fits ft000601_1151_1200G228470H.fits ft000601_1151_1200G235870H.fits ft000601_1151_1200G240770H.fits
-> Ignoring the following files containing 43 events ft000601_1151_1200G229070M.fits ft000601_1151_1200G239070M.fits
-> Ignoring the following files containing 34 events ft000601_1151_1200G216470M.fits
-> Ignoring the following files containing 32 events ft000601_1151_1200G217170M.fits
-> Ignoring the following files containing 31 events ft000601_1151_1200G216570M.fits
-> Ignoring the following files containing 30 events ft000601_1151_1200G217270M.fits
-> Ignoring the following files containing 28 events ft000601_1151_1200G200770H.fits ft000601_1151_1200G201570H.fits ft000601_1151_1200G208070H.fits ft000601_1151_1200G211170H.fits ft000601_1151_1200G212470H.fits ft000601_1151_1200G218670H.fits ft000601_1151_1200G219870H.fits ft000601_1151_1200G221670H.fits ft000601_1151_1200G224470H.fits ft000601_1151_1200G226170H.fits ft000601_1151_1200G228370H.fits ft000601_1151_1200G235770H.fits ft000601_1151_1200G237470H.fits ft000601_1151_1200G240670H.fits
-> Ignoring the following files containing 27 events ft000601_1151_1200G204370M.fits
-> Ignoring the following files containing 25 events ft000601_1151_1200G230270M.fits
-> Ignoring the following files containing 23 events ft000601_1151_1200G206470M.fits
-> Ignoring the following files containing 22 events ft000601_1151_1200G204470M.fits
-> Ignoring the following files containing 21 events ft000601_1151_1200G206370M.fits
-> Ignoring the following files containing 20 events ft000601_1151_1200G205970M.fits
-> Ignoring the following files containing 15 events ft000601_1151_1200G205870M.fits
-> Ignoring the following files containing 13 events ft000601_1151_1200G213270H.fits ft000601_1151_1200G227170H.fits
-> Ignoring the following files containing 12 events ft000601_1151_1200G230170M.fits
-> Ignoring the following files containing 11 events ft000601_1151_1200G200270H.fits ft000601_1151_1200G201070H.fits ft000601_1151_1200G218370H.fits ft000601_1151_1200G220770H.fits ft000601_1151_1200G223970H.fits ft000601_1151_1200G225670H.fits ft000601_1151_1200G228670H.fits ft000601_1151_1200G234870H.fits
-> Ignoring the following files containing 11 events ft000601_1151_1200G214370H.fits ft000601_1151_1200G233370H.fits
-> Ignoring the following files containing 11 events ft000601_1151_1200G215670M.fits
-> Ignoring the following files containing 11 events ft000601_1151_1200G229270H.fits
-> Ignoring the following files containing 11 events ft000601_1151_1200G239370H.fits
-> Ignoring the following files containing 8 events ft000601_1151_1200G214270H.fits ft000601_1151_1200G233270H.fits
-> Ignoring the following files containing 8 events ft000601_1151_1200G239470H.fits
-> Ignoring the following files containing 7 events ft000601_1151_1200G221570H.fits ft000601_1151_1200G226070H.fits ft000601_1151_1200G235670H.fits ft000601_1151_1200G240570H.fits
-> Ignoring the following files containing 7 events ft000601_1151_1200G222170H.fits
-> Ignoring the following files containing 7 events ft000601_1151_1200G231770M.fits
-> Ignoring the following files containing 7 events ft000601_1151_1200G238070H.fits
-> Ignoring the following files containing 6 events ft000601_1151_1200G229370H.fits
-> Ignoring the following files containing 6 events ft000601_1151_1200G231670M.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G203570H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G222270H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G223270H.fits ft000601_1151_1200G226570H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G223570H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G230670H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G241070H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G209670H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G213470H.fits ft000601_1151_1200G223770H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G219270H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G220370H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G232870H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G233970H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G234570H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G241170H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G202270H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G202870M.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G207170H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G215070H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G220470H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G232070H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G232170H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G233870H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G237970H.fits
-> Ignoring the following files containing 2 events ft000601_1151_1200G203470H.fits
-> Ignoring the following files containing 2 events ft000601_1151_1200G234470H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G201870H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G203170H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G209770H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G213170H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G215170H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G219170H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G230570H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G236370H.fits
-> Grouping g3 event files
-> stdout output from group_event_files

1 ft000601_1151_1200G300170H.fits 240563
1 ft000601_1151_1200G300970H.fits 240563
1 ft000601_1151_1200G301770H.fits 240563
1 ft000601_1151_1200G302570H.fits 240563
1 ft000601_1151_1200G302670H.fits 240563
1 ft000601_1151_1200G303170H.fits 240563
1 ft000601_1151_1200G304070H.fits 240563
1 ft000601_1151_1200G304270H.fits 240563
1 ft000601_1151_1200G305470H.fits 240563
1 ft000601_1151_1200G305870H.fits 240563
1 ft000601_1151_1200G307170H.fits 240563
1 ft000601_1151_1200G307370H.fits 240563
1 ft000601_1151_1200G307570H.fits 240563
1 ft000601_1151_1200G308370H.fits 240563
1 ft000601_1151_1200G308870H.fits 240563
1 ft000601_1151_1200G309170H.fits 240563
1 ft000601_1151_1200G310070H.fits 240563
1 ft000601_1151_1200G310670H.fits 240563
1 ft000601_1151_1200G311470H.fits 240563
1 ft000601_1151_1200G311570H.fits 240563
1 ft000601_1151_1200G312770H.fits 240563
1 ft000601_1151_1200G313470H.fits 240563
1 ft000601_1151_1200G313570H.fits 240563
1 ft000601_1151_1200G314470H.fits 240563
1 ft000601_1151_1200G315370H.fits 240563
1 ft000601_1151_1200G317670H.fits 240563
1 ft000601_1151_1200G317970H.fits 240563
1 ft000601_1151_1200G318270H.fits 240563
1 ft000601_1151_1200G318570H.fits 240563
1 ft000601_1151_1200G319170H.fits 240563
1 ft000601_1151_1200G319770H.fits 240563
1 ft000601_1151_1200G320370H.fits 240563
1 ft000601_1151_1200G320970H.fits 240563
1 ft000601_1151_1200G322170H.fits 240563
1 ft000601_1151_1200G322770H.fits 240563
1 ft000601_1151_1200G323370H.fits 240563
1 ft000601_1151_1200G323470H.fits 240563
1 ft000601_1151_1200G324170H.fits 240563
1 ft000601_1151_1200G324970H.fits 240563
1 ft000601_1151_1200G325670H.fits 240563
1 ft000601_1151_1200G325770H.fits 240563
1 ft000601_1151_1200G326570H.fits 240563
1 ft000601_1151_1200G326670H.fits 240563
1 ft000601_1151_1200G327470H.fits 240563
1 ft000601_1151_1200G328670H.fits 240563
1 ft000601_1151_1200G329670H.fits 240563
1 ft000601_1151_1200G329870H.fits 240563
1 ft000601_1151_1200G331170H.fits 240563
1 ft000601_1151_1200G331470H.fits 240563
1 ft000601_1151_1200G332670H.fits 240563
1 ft000601_1151_1200G333070H.fits 240563
1 ft000601_1151_1200G333270H.fits 240563
1 ft000601_1151_1200G333870H.fits 240563
1 ft000601_1151_1200G334470H.fits 240563
1 ft000601_1151_1200G335070H.fits 240563
1 ft000601_1151_1200G336270H.fits 240563
1 ft000601_1151_1200G336870H.fits 240563
1 ft000601_1151_1200G337970H.fits 240563
1 ft000601_1151_1200G338570H.fits 240563
1 ft000601_1151_1200G339970H.fits 240563
1 ft000601_1151_1200G341170H.fits 240563
1 ft000601_1151_1200G341670H.fits 240563
2 ft000601_1151_1200G303070M.fits 163462
2 ft000601_1151_1200G304370M.fits 163462
2 ft000601_1151_1200G305170M.fits 163462
2 ft000601_1151_1200G305370M.fits 163462
2 ft000601_1151_1200G305570M.fits 163462
2 ft000601_1151_1200G305770M.fits 163462
2 ft000601_1151_1200G305970M.fits 163462
2 ft000601_1151_1200G306470M.fits 163462
2 ft000601_1151_1200G306970M.fits 163462
2 ft000601_1151_1200G307270M.fits 163462
2 ft000601_1151_1200G307470M.fits 163462
2 ft000601_1151_1200G308470M.fits 163462
2 ft000601_1151_1200G308770M.fits 163462
2 ft000601_1151_1200G314070M.fits 163462
2 ft000601_1151_1200G314970M.fits 163462
2 ft000601_1151_1200G315570M.fits 163462
2 ft000601_1151_1200G316170M.fits 163462
2 ft000601_1151_1200G316770M.fits 163462
2 ft000601_1151_1200G316970M.fits 163462
2 ft000601_1151_1200G317470M.fits 163462
2 ft000601_1151_1200G317870M.fits 163462
2 ft000601_1151_1200G318470M.fits 163462
2 ft000601_1151_1200G319370M.fits 163462
2 ft000601_1151_1200G320570M.fits 163462
2 ft000601_1151_1200G322370M.fits 163462
2 ft000601_1151_1200G329270M.fits 163462
2 ft000601_1151_1200G330070M.fits 163462
2 ft000601_1151_1200G330770M.fits 163462
2 ft000601_1151_1200G331370M.fits 163462
2 ft000601_1151_1200G331670M.fits 163462
2 ft000601_1151_1200G332270M.fits 163462
2 ft000601_1151_1200G332870M.fits 163462
2 ft000601_1151_1200G333470M.fits 163462
2 ft000601_1151_1200G334070M.fits 163462
2 ft000601_1151_1200G334670M.fits 163462
2 ft000601_1151_1200G336470M.fits 163462
2 ft000601_1151_1200G339470M.fits 163462
2 ft000601_1151_1200G341270M.fits 163462
3 ft000601_1151_1200G304770L.fits 93221
3 ft000601_1151_1200G305670L.fits 93221
3 ft000601_1151_1200G306070L.fits 93221
3 ft000601_1151_1200G306570L.fits 93221
3 ft000601_1151_1200G307070L.fits 93221
3 ft000601_1151_1200G308670L.fits 93221
3 ft000601_1151_1200G309670L.fits 93221
3 ft000601_1151_1200G310570L.fits 93221
3 ft000601_1151_1200G313970L.fits 93221
3 ft000601_1151_1200G314870L.fits 93221
3 ft000601_1151_1200G316070L.fits 93221
3 ft000601_1151_1200G316370L.fits 93221
3 ft000601_1151_1200G316870L.fits 93221
3 ft000601_1151_1200G317070L.fits 93221
3 ft000601_1151_1200G317570L.fits 93221
3 ft000601_1151_1200G330370L.fits 93221
3 ft000601_1151_1200G331870L.fits 93221
3 ft000601_1151_1200G332970L.fits 93221
3 ft000601_1151_1200G338170L.fits 93221
3 ft000601_1151_1200G339570L.fits 93221
3 ft000601_1151_1200G342270L.fits 93221
4 ft000601_1151_1200G305070M.fits 3211
4 ft000601_1151_1200G306370M.fits 3211
4 ft000601_1151_1200G306870M.fits 3211
4 ft000601_1151_1200G315470M.fits 3211
4 ft000601_1151_1200G316670M.fits 3211
4 ft000601_1151_1200G317370M.fits 3211
4 ft000601_1151_1200G317770M.fits 3211
4 ft000601_1151_1200G318370M.fits 3211
4 ft000601_1151_1200G319270M.fits 3211
4 ft000601_1151_1200G320470M.fits 3211
4 ft000601_1151_1200G322270M.fits 3211
4 ft000601_1151_1200G329970M.fits 3211
4 ft000601_1151_1200G330670M.fits 3211
4 ft000601_1151_1200G331270M.fits 3211
4 ft000601_1151_1200G331570M.fits 3211
4 ft000601_1151_1200G332170M.fits 3211
4 ft000601_1151_1200G332770M.fits 3211
4 ft000601_1151_1200G333370M.fits 3211
4 ft000601_1151_1200G333970M.fits 3211
4 ft000601_1151_1200G334570M.fits 3211
4 ft000601_1151_1200G336370M.fits 3211
5 ft000601_1151_1200G308570L.fits 2042
5 ft000601_1151_1200G316270L.fits 2042
5 ft000601_1151_1200G331770L.fits 2042
5 ft000601_1151_1200G338070L.fits 2042
6 ft000601_1151_1200G309570L.fits 516
6 ft000601_1151_1200G315970L.fits 516
6 ft000601_1151_1200G342170L.fits 516
7 ft000601_1151_1200G304670L.fits 219
7 ft000601_1151_1200G310470L.fits 219
7 ft000601_1151_1200G313870L.fits 219
7 ft000601_1151_1200G314770L.fits 219
7 ft000601_1151_1200G330270L.fits 219
8 ft000601_1151_1200G300870H.fits 109
8 ft000601_1151_1200G301670H.fits 109
8 ft000601_1151_1200G308270H.fits 109
8 ft000601_1151_1200G311370H.fits 109
8 ft000601_1151_1200G312670H.fits 109
8 ft000601_1151_1200G319070H.fits 109
8 ft000601_1151_1200G320270H.fits 109
8 ft000601_1151_1200G322070H.fits 109
8 ft000601_1151_1200G323270H.fits 109
8 ft000601_1151_1200G324870H.fits 109
8 ft000601_1151_1200G326470H.fits 109
8 ft000601_1151_1200G328570H.fits 109
8 ft000601_1151_1200G336170H.fits 109
8 ft000601_1151_1200G341070H.fits 109
9 ft000601_1151_1200G301970H.fits 97
9 ft000601_1151_1200G303370H.fits 97
9 ft000601_1151_1200G312870H.fits 97
9 ft000601_1151_1200G323570H.fits 97
9 ft000601_1151_1200G325070H.fits 97
9 ft000601_1151_1200G326770H.fits 97
10 ft000601_1151_1200G305270M.fits 65
11 ft000601_1151_1200G300770H.fits 62
11 ft000601_1151_1200G311270H.fits 62
11 ft000601_1151_1200G312570H.fits 62
11 ft000601_1151_1200G318970H.fits 62
11 ft000601_1151_1200G320170H.fits 62
11 ft000601_1151_1200G321970H.fits 62
11 ft000601_1151_1200G323170H.fits 62
11 ft000601_1151_1200G324770H.fits 62
11 ft000601_1151_1200G326370H.fits 62
11 ft000601_1151_1200G328470H.fits 62
11 ft000601_1151_1200G336070H.fits 62
11 ft000601_1151_1200G337770H.fits 62
11 ft000601_1151_1200G340970H.fits 62
12 ft000601_1151_1200G309970H.fits 61
12 ft000601_1151_1200G314370H.fits 61
12 ft000601_1151_1200G315270H.fits 61
12 ft000601_1151_1200G319670H.fits 61
12 ft000601_1151_1200G320870H.fits 61
12 ft000601_1151_1200G322670H.fits 61
12 ft000601_1151_1200G329570H.fits 61
12 ft000601_1151_1200G331070H.fits 61
12 ft000601_1151_1200G332570H.fits 61
12 ft000601_1151_1200G333770H.fits 61
12 ft000601_1151_1200G334370H.fits 61
12 ft000601_1151_1200G334970H.fits 61
12 ft000601_1151_1200G336770H.fits 61
12 ft000601_1151_1200G338470H.fits 61
12 ft000601_1151_1200G339870H.fits 61
12 ft000601_1151_1200G341570H.fits 61
13 ft000601_1151_1200G304870M.fits 40
14 ft000601_1151_1200G316470M.fits 37
15 ft000601_1151_1200G306770M.fits 36
16 ft000601_1151_1200G317170M.fits 34
17 ft000601_1151_1200G317270M.fits 32
18 ft000601_1151_1200G304970M.fits 31
19 ft000601_1151_1200G306670M.fits 26
20 ft000601_1151_1200G316570M.fits 26
21 ft000601_1151_1200G329170M.fits 23
21 ft000601_1151_1200G339370M.fits 23
22 ft000601_1151_1200G306270M.fits 19
23 ft000601_1151_1200G306170M.fits 18
24 ft000601_1151_1200G330570M.fits 18
25 ft000601_1151_1200G300270H.fits 16
25 ft000601_1151_1200G301070H.fits 16
25 ft000601_1151_1200G318670H.fits 16
25 ft000601_1151_1200G319870H.fits 16
25 ft000601_1151_1200G321070H.fits 16
25 ft000601_1151_1200G325870H.fits 16
25 ft000601_1151_1200G327570H.fits 16
25 ft000601_1151_1200G328770H.fits 16
26 ft000601_1151_1200G330470M.fits 15
27 ft000601_1151_1200G329470H.fits 13
28 ft000601_1151_1200G315670M.fits 12
29 ft000601_1151_1200G300670H.fits 11
29 ft000601_1151_1200G312470H.fits 11
29 ft000601_1151_1200G318870H.fits 11
29 ft000601_1151_1200G323070H.fits 11
29 ft000601_1151_1200G328370H.fits 11
30 ft000601_1151_1200G339670H.fits 10
31 ft000601_1151_1200G303470H.fits 9
31 ft000601_1151_1200G326870H.fits 9
32 ft000601_1151_1200G313370H.fits 9
32 ft000601_1151_1200G324070H.fits 9
33 ft000601_1151_1200G331970M.fits 9
34 ft000601_1151_1200G339770H.fits 9
35 ft000601_1151_1200G319470H.fits 8
36 ft000601_1151_1200G322470H.fits 8
37 ft000601_1151_1200G304170H.fits 7
38 ft000601_1151_1200G318070H.fits 7
39 ft000601_1151_1200G309770H.fits 6
40 ft000601_1151_1200G330970H.fits 6
41 ft000601_1151_1200G332070M.fits 6
42 ft000601_1151_1200G301870H.fits 5
42 ft000601_1151_1200G303270H.fits 5
43 ft000601_1151_1200G315170H.fits 5
44 ft000601_1151_1200G320670H.fits 5
45 ft000601_1151_1200G338370H.fits 5
46 ft000601_1151_1200G302370H.fits 4
46 ft000601_1151_1200G303870H.fits 4
47 ft000601_1151_1200G302470H.fits 4
47 ft000601_1151_1200G325570H.fits 4
48 ft000601_1151_1200G315070H.fits 4
49 ft000601_1151_1200G318170H.fits 4
50 ft000601_1151_1200G322570H.fits 4
51 ft000601_1151_1200G329770H.fits 4
52 ft000601_1151_1200G334270H.fits 4
53 ft000601_1151_1200G303970H.fits 3
54 ft000601_1151_1200G320770H.fits 3
55 ft000601_1151_1200G329370H.fits 3
56 ft000601_1151_1200G332370H.fits 3
57 ft000601_1151_1200G333570H.fits 3
58 ft000601_1151_1200G333670H.fits 3
59 ft000601_1151_1200G334170H.fits 3
60 ft000601_1151_1200G336570H.fits 3
61 ft000601_1151_1200G341370H.fits 3
62 ft000601_1151_1200G341470H.fits 3
63 ft000601_1151_1200G309870H.fits 2
64 ft000601_1151_1200G314170H.fits 2
65 ft000601_1151_1200G314270H.fits 2
66 ft000601_1151_1200G332470H.fits 2
67 ft000601_1151_1200G336670H.fits 2
68 ft000601_1151_1200G302970M.fits 1
69 ft000601_1151_1200G319570H.fits 1
70 ft000601_1151_1200G327370H.fits 1
71 ft000601_1151_1200G330870H.fits 1
72 ft000601_1151_1200G333170H.fits 1
73 ft000601_1151_1200G334770H.fits 1
74 ft000601_1151_1200G334870H.fits 1

-> Creating ad78011000g300170h.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  62  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 62 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G300170H.fits 
 2 -- ft000601_1151_1200G300970H.fits 
 3 -- ft000601_1151_1200G301770H.fits 
 4 -- ft000601_1151_1200G302570H.fits 
 5 -- ft000601_1151_1200G302670H.fits 
 6 -- ft000601_1151_1200G303170H.fits 
 7 -- ft000601_1151_1200G304070H.fits 
 8 -- ft000601_1151_1200G304270H.fits 
 9 -- ft000601_1151_1200G305470H.fits 
 10 -- ft000601_1151_1200G305870H.fits 
 11 -- ft000601_1151_1200G307170H.fits 
 12 -- ft000601_1151_1200G307370H.fits 
 13 -- ft000601_1151_1200G307570H.fits 
 14 -- ft000601_1151_1200G308370H.fits 
 15 -- ft000601_1151_1200G308870H.fits 
 16 -- ft000601_1151_1200G309170H.fits 
 17 -- ft000601_1151_1200G310070H.fits 
 18 -- ft000601_1151_1200G310670H.fits 
 19 -- ft000601_1151_1200G311470H.fits 
 20 -- ft000601_1151_1200G311570H.fits 
 21 -- ft000601_1151_1200G312770H.fits 
 22 -- ft000601_1151_1200G313470H.fits 
 23 -- ft000601_1151_1200G313570H.fits 
 24 -- ft000601_1151_1200G314470H.fits 
 25 -- ft000601_1151_1200G315370H.fits 
 26 -- ft000601_1151_1200G317670H.fits 
 27 -- ft000601_1151_1200G317970H.fits 
 28 -- ft000601_1151_1200G318270H.fits 
 29 -- ft000601_1151_1200G318570H.fits 
 30 -- ft000601_1151_1200G319170H.fits 
 31 -- ft000601_1151_1200G319770H.fits 
 32 -- ft000601_1151_1200G320370H.fits 
 33 -- ft000601_1151_1200G320970H.fits 
 34 -- ft000601_1151_1200G322170H.fits 
 35 -- ft000601_1151_1200G322770H.fits 
 36 -- ft000601_1151_1200G323370H.fits 
 37 -- ft000601_1151_1200G323470H.fits 
 38 -- ft000601_1151_1200G324170H.fits 
 39 -- ft000601_1151_1200G324970H.fits 
 40 -- ft000601_1151_1200G325670H.fits 
 41 -- ft000601_1151_1200G325770H.fits 
 42 -- ft000601_1151_1200G326570H.fits 
 43 -- ft000601_1151_1200G326670H.fits 
 44 -- ft000601_1151_1200G327470H.fits 
 45 -- ft000601_1151_1200G328670H.fits 
 46 -- ft000601_1151_1200G329670H.fits 
 47 -- ft000601_1151_1200G329870H.fits 
 48 -- ft000601_1151_1200G331170H.fits 
 49 -- ft000601_1151_1200G331470H.fits 
 50 -- ft000601_1151_1200G332670H.fits 
 51 -- ft000601_1151_1200G333070H.fits 
 52 -- ft000601_1151_1200G333270H.fits 
 53 -- ft000601_1151_1200G333870H.fits 
 54 -- ft000601_1151_1200G334470H.fits 
 55 -- ft000601_1151_1200G335070H.fits 
 56 -- ft000601_1151_1200G336270H.fits 
 57 -- ft000601_1151_1200G336870H.fits 
 58 -- ft000601_1151_1200G337970H.fits 
 59 -- ft000601_1151_1200G338570H.fits 
 60 -- ft000601_1151_1200G339970H.fits 
 61 -- ft000601_1151_1200G341170H.fits 
 62 -- ft000601_1151_1200G341670H.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G300170H.fits 
 2 -- ft000601_1151_1200G300970H.fits 
 3 -- ft000601_1151_1200G301770H.fits 
 4 -- ft000601_1151_1200G302570H.fits 
 5 -- ft000601_1151_1200G302670H.fits 
 6 -- ft000601_1151_1200G303170H.fits 
 7 -- ft000601_1151_1200G304070H.fits 
 8 -- ft000601_1151_1200G304270H.fits 
 9 -- ft000601_1151_1200G305470H.fits 
 10 -- ft000601_1151_1200G305870H.fits 
 11 -- ft000601_1151_1200G307170H.fits 
 12 -- ft000601_1151_1200G307370H.fits 
 13 -- ft000601_1151_1200G307570H.fits 
 14 -- ft000601_1151_1200G308370H.fits 
 15 -- ft000601_1151_1200G308870H.fits 
 16 -- ft000601_1151_1200G309170H.fits 
 17 -- ft000601_1151_1200G310070H.fits 
 18 -- ft000601_1151_1200G310670H.fits 
 19 -- ft000601_1151_1200G311470H.fits 
 20 -- ft000601_1151_1200G311570H.fits 
 21 -- ft000601_1151_1200G312770H.fits 
 22 -- ft000601_1151_1200G313470H.fits 
 23 -- ft000601_1151_1200G313570H.fits 
 24 -- ft000601_1151_1200G314470H.fits 
 25 -- ft000601_1151_1200G315370H.fits 
 26 -- ft000601_1151_1200G317670H.fits 
 27 -- ft000601_1151_1200G317970H.fits 
 28 -- ft000601_1151_1200G318270H.fits 
 29 -- ft000601_1151_1200G318570H.fits 
 30 -- ft000601_1151_1200G319170H.fits 
 31 -- ft000601_1151_1200G319770H.fits 
 32 -- ft000601_1151_1200G320370H.fits 
 33 -- ft000601_1151_1200G320970H.fits 
 34 -- ft000601_1151_1200G322170H.fits 
 35 -- ft000601_1151_1200G322770H.fits 
 36 -- ft000601_1151_1200G323370H.fits 
 37 -- ft000601_1151_1200G323470H.fits 
 38 -- ft000601_1151_1200G324170H.fits 
 39 -- ft000601_1151_1200G324970H.fits 
 40 -- ft000601_1151_1200G325670H.fits 
 41 -- ft000601_1151_1200G325770H.fits 
 42 -- ft000601_1151_1200G326570H.fits 
 43 -- ft000601_1151_1200G326670H.fits 
 44 -- ft000601_1151_1200G327470H.fits 
 45 -- ft000601_1151_1200G328670H.fits 
 46 -- ft000601_1151_1200G329670H.fits 
 47 -- ft000601_1151_1200G329870H.fits 
 48 -- ft000601_1151_1200G331170H.fits 
 49 -- ft000601_1151_1200G331470H.fits 
 50 -- ft000601_1151_1200G332670H.fits 
 51 -- ft000601_1151_1200G333070H.fits 
 52 -- ft000601_1151_1200G333270H.fits 
 53 -- ft000601_1151_1200G333870H.fits 
 54 -- ft000601_1151_1200G334470H.fits 
 55 -- ft000601_1151_1200G335070H.fits 
 56 -- ft000601_1151_1200G336270H.fits 
 57 -- ft000601_1151_1200G336870H.fits 
 58 -- ft000601_1151_1200G337970H.fits 
 59 -- ft000601_1151_1200G338570H.fits 
 60 -- ft000601_1151_1200G339970H.fits 
 61 -- ft000601_1151_1200G341170H.fits 
 62 -- ft000601_1151_1200G341670H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g300270m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  38  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 38 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G303070M.fits 
 2 -- ft000601_1151_1200G304370M.fits 
 3 -- ft000601_1151_1200G305170M.fits 
 4 -- ft000601_1151_1200G305370M.fits 
 5 -- ft000601_1151_1200G305570M.fits 
 6 -- ft000601_1151_1200G305770M.fits 
 7 -- ft000601_1151_1200G305970M.fits 
 8 -- ft000601_1151_1200G306470M.fits 
 9 -- ft000601_1151_1200G306970M.fits 
 10 -- ft000601_1151_1200G307270M.fits 
 11 -- ft000601_1151_1200G307470M.fits 
 12 -- ft000601_1151_1200G308470M.fits 
 13 -- ft000601_1151_1200G308770M.fits 
 14 -- ft000601_1151_1200G314070M.fits 
 15 -- ft000601_1151_1200G314970M.fits 
 16 -- ft000601_1151_1200G315570M.fits 
 17 -- ft000601_1151_1200G316170M.fits 
 18 -- ft000601_1151_1200G316770M.fits 
 19 -- ft000601_1151_1200G316970M.fits 
 20 -- ft000601_1151_1200G317470M.fits 
 21 -- ft000601_1151_1200G317870M.fits 
 22 -- ft000601_1151_1200G318470M.fits 
 23 -- ft000601_1151_1200G319370M.fits 
 24 -- ft000601_1151_1200G320570M.fits 
 25 -- ft000601_1151_1200G322370M.fits 
 26 -- ft000601_1151_1200G329270M.fits 
 27 -- ft000601_1151_1200G330070M.fits 
 28 -- ft000601_1151_1200G330770M.fits 
 29 -- ft000601_1151_1200G331370M.fits 
 30 -- ft000601_1151_1200G331670M.fits 
 31 -- ft000601_1151_1200G332270M.fits 
 32 -- ft000601_1151_1200G332870M.fits 
 33 -- ft000601_1151_1200G333470M.fits 
 34 -- ft000601_1151_1200G334070M.fits 
 35 -- ft000601_1151_1200G334670M.fits 
 36 -- ft000601_1151_1200G336470M.fits 
 37 -- ft000601_1151_1200G339470M.fits 
 38 -- ft000601_1151_1200G341270M.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G303070M.fits 
 2 -- ft000601_1151_1200G304370M.fits 
 3 -- ft000601_1151_1200G305170M.fits 
 4 -- ft000601_1151_1200G305370M.fits 
 5 -- ft000601_1151_1200G305570M.fits 
 6 -- ft000601_1151_1200G305770M.fits 
 7 -- ft000601_1151_1200G305970M.fits 
 8 -- ft000601_1151_1200G306470M.fits 
 9 -- ft000601_1151_1200G306970M.fits 
 10 -- ft000601_1151_1200G307270M.fits 
 11 -- ft000601_1151_1200G307470M.fits 
 12 -- ft000601_1151_1200G308470M.fits 
 13 -- ft000601_1151_1200G308770M.fits 
 14 -- ft000601_1151_1200G314070M.fits 
 15 -- ft000601_1151_1200G314970M.fits 
 16 -- ft000601_1151_1200G315570M.fits 
 17 -- ft000601_1151_1200G316170M.fits 
 18 -- ft000601_1151_1200G316770M.fits 
 19 -- ft000601_1151_1200G316970M.fits 
 20 -- ft000601_1151_1200G317470M.fits 
 21 -- ft000601_1151_1200G317870M.fits 
 22 -- ft000601_1151_1200G318470M.fits 
 23 -- ft000601_1151_1200G319370M.fits 
 24 -- ft000601_1151_1200G320570M.fits 
 25 -- ft000601_1151_1200G322370M.fits 
 26 -- ft000601_1151_1200G329270M.fits 
 27 -- ft000601_1151_1200G330070M.fits 
 28 -- ft000601_1151_1200G330770M.fits 
 29 -- ft000601_1151_1200G331370M.fits 
 30 -- ft000601_1151_1200G331670M.fits 
 31 -- ft000601_1151_1200G332270M.fits 
 32 -- ft000601_1151_1200G332870M.fits 
 33 -- ft000601_1151_1200G333470M.fits 
 34 -- ft000601_1151_1200G334070M.fits 
 35 -- ft000601_1151_1200G334670M.fits 
 36 -- ft000601_1151_1200G336470M.fits 
 37 -- ft000601_1151_1200G339470M.fits 
 38 -- ft000601_1151_1200G341270M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g300370l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  21  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 21 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G304770L.fits 
 2 -- ft000601_1151_1200G305670L.fits 
 3 -- ft000601_1151_1200G306070L.fits 
 4 -- ft000601_1151_1200G306570L.fits 
 5 -- ft000601_1151_1200G307070L.fits 
 6 -- ft000601_1151_1200G308670L.fits 
 7 -- ft000601_1151_1200G309670L.fits 
 8 -- ft000601_1151_1200G310570L.fits 
 9 -- ft000601_1151_1200G313970L.fits 
 10 -- ft000601_1151_1200G314870L.fits 
 11 -- ft000601_1151_1200G316070L.fits 
 12 -- ft000601_1151_1200G316370L.fits 
 13 -- ft000601_1151_1200G316870L.fits 
 14 -- ft000601_1151_1200G317070L.fits 
 15 -- ft000601_1151_1200G317570L.fits 
 16 -- ft000601_1151_1200G330370L.fits 
 17 -- ft000601_1151_1200G331870L.fits 
 18 -- ft000601_1151_1200G332970L.fits 
 19 -- ft000601_1151_1200G338170L.fits 
 20 -- ft000601_1151_1200G339570L.fits 
 21 -- ft000601_1151_1200G342270L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G304770L.fits 
 2 -- ft000601_1151_1200G305670L.fits 
 3 -- ft000601_1151_1200G306070L.fits 
 4 -- ft000601_1151_1200G306570L.fits 
 5 -- ft000601_1151_1200G307070L.fits 
 6 -- ft000601_1151_1200G308670L.fits 
 7 -- ft000601_1151_1200G309670L.fits 
 8 -- ft000601_1151_1200G310570L.fits 
 9 -- ft000601_1151_1200G313970L.fits 
 10 -- ft000601_1151_1200G314870L.fits 
 11 -- ft000601_1151_1200G316070L.fits 
 12 -- ft000601_1151_1200G316370L.fits 
 13 -- ft000601_1151_1200G316870L.fits 
 14 -- ft000601_1151_1200G317070L.fits 
 15 -- ft000601_1151_1200G317570L.fits 
 16 -- ft000601_1151_1200G330370L.fits 
 17 -- ft000601_1151_1200G331870L.fits 
 18 -- ft000601_1151_1200G332970L.fits 
 19 -- ft000601_1151_1200G338170L.fits 
 20 -- ft000601_1151_1200G339570L.fits 
 21 -- ft000601_1151_1200G342270L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g300470m.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  21  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 21 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G305070M.fits 
 2 -- ft000601_1151_1200G306370M.fits 
 3 -- ft000601_1151_1200G306870M.fits 
 4 -- ft000601_1151_1200G315470M.fits 
 5 -- ft000601_1151_1200G316670M.fits 
 6 -- ft000601_1151_1200G317370M.fits 
 7 -- ft000601_1151_1200G317770M.fits 
 8 -- ft000601_1151_1200G318370M.fits 
 9 -- ft000601_1151_1200G319270M.fits 
 10 -- ft000601_1151_1200G320470M.fits 
 11 -- ft000601_1151_1200G322270M.fits 
 12 -- ft000601_1151_1200G329970M.fits 
 13 -- ft000601_1151_1200G330670M.fits 
 14 -- ft000601_1151_1200G331270M.fits 
 15 -- ft000601_1151_1200G331570M.fits 
 16 -- ft000601_1151_1200G332170M.fits 
 17 -- ft000601_1151_1200G332770M.fits 
 18 -- ft000601_1151_1200G333370M.fits 
 19 -- ft000601_1151_1200G333970M.fits 
 20 -- ft000601_1151_1200G334570M.fits 
 21 -- ft000601_1151_1200G336370M.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G305070M.fits 
 2 -- ft000601_1151_1200G306370M.fits 
 3 -- ft000601_1151_1200G306870M.fits 
 4 -- ft000601_1151_1200G315470M.fits 
 5 -- ft000601_1151_1200G316670M.fits 
 6 -- ft000601_1151_1200G317370M.fits 
 7 -- ft000601_1151_1200G317770M.fits 
 8 -- ft000601_1151_1200G318370M.fits 
 9 -- ft000601_1151_1200G319270M.fits 
 10 -- ft000601_1151_1200G320470M.fits 
 11 -- ft000601_1151_1200G322270M.fits 
 12 -- ft000601_1151_1200G329970M.fits 
 13 -- ft000601_1151_1200G330670M.fits 
 14 -- ft000601_1151_1200G331270M.fits 
 15 -- ft000601_1151_1200G331570M.fits 
 16 -- ft000601_1151_1200G332170M.fits 
 17 -- ft000601_1151_1200G332770M.fits 
 18 -- ft000601_1151_1200G333370M.fits 
 19 -- ft000601_1151_1200G333970M.fits 
 20 -- ft000601_1151_1200G334570M.fits 
 21 -- ft000601_1151_1200G336370M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g300570l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  4  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 4 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G308570L.fits 
 2 -- ft000601_1151_1200G316270L.fits 
 3 -- ft000601_1151_1200G331770L.fits 
 4 -- ft000601_1151_1200G338070L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G308570L.fits 
 2 -- ft000601_1151_1200G316270L.fits 
 3 -- ft000601_1151_1200G331770L.fits 
 4 -- ft000601_1151_1200G338070L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Creating ad78011000g300670l.unf
-> stdout output from cmerge

---- cmerge:  version 1.7 ----

A total of  3  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 3 good fits files ...
Merging binary extension #: 1 
 1 -- ft000601_1151_1200G309570L.fits 
 2 -- ft000601_1151_1200G315970L.fits 
 3 -- ft000601_1151_1200G342170L.fits 
Merging binary extension #: 2 
 1 -- ft000601_1151_1200G309570L.fits 
 2 -- ft000601_1151_1200G315970L.fits 
 3 -- ft000601_1151_1200G342170L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!

-> Ignoring the following files containing 219 events ft000601_1151_1200G304670L.fits ft000601_1151_1200G310470L.fits ft000601_1151_1200G313870L.fits ft000601_1151_1200G314770L.fits ft000601_1151_1200G330270L.fits
-> Ignoring the following files containing 109 events ft000601_1151_1200G300870H.fits ft000601_1151_1200G301670H.fits ft000601_1151_1200G308270H.fits ft000601_1151_1200G311370H.fits ft000601_1151_1200G312670H.fits ft000601_1151_1200G319070H.fits ft000601_1151_1200G320270H.fits ft000601_1151_1200G322070H.fits ft000601_1151_1200G323270H.fits ft000601_1151_1200G324870H.fits ft000601_1151_1200G326470H.fits ft000601_1151_1200G328570H.fits ft000601_1151_1200G336170H.fits ft000601_1151_1200G341070H.fits
-> Ignoring the following files containing 97 events ft000601_1151_1200G301970H.fits ft000601_1151_1200G303370H.fits ft000601_1151_1200G312870H.fits ft000601_1151_1200G323570H.fits ft000601_1151_1200G325070H.fits ft000601_1151_1200G326770H.fits
-> Ignoring the following files containing 65 events ft000601_1151_1200G305270M.fits
-> Ignoring the following files containing 62 events ft000601_1151_1200G300770H.fits ft000601_1151_1200G311270H.fits ft000601_1151_1200G312570H.fits ft000601_1151_1200G318970H.fits ft000601_1151_1200G320170H.fits ft000601_1151_1200G321970H.fits ft000601_1151_1200G323170H.fits ft000601_1151_1200G324770H.fits ft000601_1151_1200G326370H.fits ft000601_1151_1200G328470H.fits ft000601_1151_1200G336070H.fits ft000601_1151_1200G337770H.fits ft000601_1151_1200G340970H.fits
-> Ignoring the following files containing 61 events ft000601_1151_1200G309970H.fits ft000601_1151_1200G314370H.fits ft000601_1151_1200G315270H.fits ft000601_1151_1200G319670H.fits ft000601_1151_1200G320870H.fits ft000601_1151_1200G322670H.fits ft000601_1151_1200G329570H.fits ft000601_1151_1200G331070H.fits ft000601_1151_1200G332570H.fits ft000601_1151_1200G333770H.fits ft000601_1151_1200G334370H.fits ft000601_1151_1200G334970H.fits ft000601_1151_1200G336770H.fits ft000601_1151_1200G338470H.fits ft000601_1151_1200G339870H.fits ft000601_1151_1200G341570H.fits
-> Ignoring the following files containing 40 events ft000601_1151_1200G304870M.fits
-> Ignoring the following files containing 37 events ft000601_1151_1200G316470M.fits
-> Ignoring the following files containing 36 events ft000601_1151_1200G306770M.fits
-> Ignoring the following files containing 34 events ft000601_1151_1200G317170M.fits
-> Ignoring the following files containing 32 events ft000601_1151_1200G317270M.fits
-> Ignoring the following files containing 31 events ft000601_1151_1200G304970M.fits
-> Ignoring the following files containing 26 events ft000601_1151_1200G306670M.fits
-> Ignoring the following files containing 26 events ft000601_1151_1200G316570M.fits
-> Ignoring the following files containing 23 events ft000601_1151_1200G329170M.fits ft000601_1151_1200G339370M.fits
-> Ignoring the following files containing 19 events ft000601_1151_1200G306270M.fits
-> Ignoring the following files containing 18 events ft000601_1151_1200G306170M.fits
-> Ignoring the following files containing 18 events ft000601_1151_1200G330570M.fits
-> Ignoring the following files containing 16 events ft000601_1151_1200G300270H.fits ft000601_1151_1200G301070H.fits ft000601_1151_1200G318670H.fits ft000601_1151_1200G319870H.fits ft000601_1151_1200G321070H.fits ft000601_1151_1200G325870H.fits ft000601_1151_1200G327570H.fits ft000601_1151_1200G328770H.fits
-> Ignoring the following files containing 15 events ft000601_1151_1200G330470M.fits
-> Ignoring the following files containing 13 events ft000601_1151_1200G329470H.fits
-> Ignoring the following files containing 12 events ft000601_1151_1200G315670M.fits
-> Ignoring the following files containing 11 events ft000601_1151_1200G300670H.fits ft000601_1151_1200G312470H.fits ft000601_1151_1200G318870H.fits ft000601_1151_1200G323070H.fits ft000601_1151_1200G328370H.fits
-> Ignoring the following files containing 10 events ft000601_1151_1200G339670H.fits
-> Ignoring the following files containing 9 events ft000601_1151_1200G303470H.fits ft000601_1151_1200G326870H.fits
-> Ignoring the following files containing 9 events ft000601_1151_1200G313370H.fits ft000601_1151_1200G324070H.fits
-> Ignoring the following files containing 9 events ft000601_1151_1200G331970M.fits
-> Ignoring the following files containing 9 events ft000601_1151_1200G339770H.fits
-> Ignoring the following files containing 8 events ft000601_1151_1200G319470H.fits
-> Ignoring the following files containing 8 events ft000601_1151_1200G322470H.fits
-> Ignoring the following files containing 7 events ft000601_1151_1200G304170H.fits
-> Ignoring the following files containing 7 events ft000601_1151_1200G318070H.fits
-> Ignoring the following files containing 6 events ft000601_1151_1200G309770H.fits
-> Ignoring the following files containing 6 events ft000601_1151_1200G330970H.fits
-> Ignoring the following files containing 6 events ft000601_1151_1200G332070M.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G301870H.fits ft000601_1151_1200G303270H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G315170H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G320670H.fits
-> Ignoring the following files containing 5 events ft000601_1151_1200G338370H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G302370H.fits ft000601_1151_1200G303870H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G302470H.fits ft000601_1151_1200G325570H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G315070H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G318170H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G322570H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G329770H.fits
-> Ignoring the following files containing 4 events ft000601_1151_1200G334270H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G303970H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G320770H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G329370H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G332370H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G333570H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G333670H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G334170H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G336570H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G341370H.fits
-> Ignoring the following files containing 3 events ft000601_1151_1200G341470H.fits
-> Ignoring the following files containing 2 events ft000601_1151_1200G309870H.fits
-> Ignoring the following files containing 2 events ft000601_1151_1200G314170H.fits
-> Ignoring the following files containing 2 events ft000601_1151_1200G314270H.fits
-> Ignoring the following files containing 2 events ft000601_1151_1200G332470H.fits
-> Ignoring the following files containing 2 events ft000601_1151_1200G336670H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G302970M.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G319570H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G327370H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G330870H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G333170H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G334770H.fits
-> Ignoring the following files containing 1 events ft000601_1151_1200G334870H.fits
-> stdout output from tar

a ft000601_1151_1200G200270H.fits 31K
a ft000601_1151_1200G200770H.fits 31K
a ft000601_1151_1200G200870H.fits 31K
a ft000601_1151_1200G201070H.fits 31K
a ft000601_1151_1200G201570H.fits 31K
a ft000601_1151_1200G201670H.fits 31K
a ft000601_1151_1200G201870H.fits 31K
a ft000601_1151_1200G202270H.fits 31K
a ft000601_1151_1200G202370H.fits 31K
a ft000601_1151_1200G202870M.fits 31K
a ft000601_1151_1200G203170H.fits 31K
a ft000601_1151_1200G203470H.fits 31K
a ft000601_1151_1200G203570H.fits 31K
a ft000601_1151_1200G203670H.fits 31K
a ft000601_1151_1200G204170L.fits 31K
a ft000601_1151_1200G204370M.fits 31K
a ft000601_1151_1200G204470M.fits 31K
a ft000601_1151_1200G204770M.fits 31K
a ft000601_1151_1200G204870M.fits 31K
a ft000601_1151_1200G204970M.fits 31K
a ft000601_1151_1200G205870M.fits 31K
a ft000601_1151_1200G205970M.fits 31K
a ft000601_1151_1200G206370M.fits 31K
a ft000601_1151_1200G206470M.fits 31K
a ft000601_1151_1200G207170H.fits 31K
a ft000601_1151_1200G208070H.fits 31K
a ft000601_1151_1200G208170H.fits 31K
a ft000601_1151_1200G209670H.fits 31K
a ft000601_1151_1200G209770H.fits 31K
a ft000601_1151_1200G209870H.fits 31K
a ft000601_1151_1200G210370L.fits 31K
a ft000601_1151_1200G211170H.fits 31K
a ft000601_1151_1200G211270H.fits 31K
a ft000601_1151_1200G212470H.fits 31K
a ft000601_1151_1200G212570H.fits 31K
a ft000601_1151_1200G213170H.fits 31K
a ft000601_1151_1200G213270H.fits 31K
a ft000601_1151_1200G213370H.fits 31K
a ft000601_1151_1200G213470H.fits 31K
a ft000601_1151_1200G213970L.fits 31K
a ft000601_1151_1200G214270H.fits 31K
a ft000601_1151_1200G214370H.fits 31K
a ft000601_1151_1200G214470H.fits 31K
a ft000601_1151_1200G214770L.fits 31K
a ft000601_1151_1200G215070H.fits 31K
a ft000601_1151_1200G215170H.fits 31K
a ft000601_1151_1200G215270H.fits 31K
a ft000601_1151_1200G215670M.fits 31K
a ft000601_1151_1200G216470M.fits 31K
a ft000601_1151_1200G216570M.fits 31K
a ft000601_1151_1200G217170M.fits 31K
a ft000601_1151_1200G217270M.fits 31K
a ft000601_1151_1200G218370H.fits 31K
a ft000601_1151_1200G218670H.fits 31K
a ft000601_1151_1200G218770H.fits 31K
a ft000601_1151_1200G219170H.fits 31K
a ft000601_1151_1200G219270H.fits 31K
a ft000601_1151_1200G219370H.fits 31K
a ft000601_1151_1200G219870H.fits 31K
a ft000601_1151_1200G219970H.fits 31K
a ft000601_1151_1200G220370H.fits 31K
a ft000601_1151_1200G220470H.fits 31K
a ft000601_1151_1200G220570H.fits 31K
a ft000601_1151_1200G220770H.fits 31K
a ft000601_1151_1200G221570H.fits 31K
a ft000601_1151_1200G221670H.fits 31K
a ft000601_1151_1200G221770H.fits 31K
a ft000601_1151_1200G222170H.fits 31K
a ft000601_1151_1200G222270H.fits 31K
a ft000601_1151_1200G222370H.fits 31K
a ft000601_1151_1200G222970H.fits 31K
a ft000601_1151_1200G223270H.fits 31K
a ft000601_1151_1200G223570H.fits 31K
a ft000601_1151_1200G223670H.fits 31K
a ft000601_1151_1200G223770H.fits 31K
a ft000601_1151_1200G223970H.fits 31K
a ft000601_1151_1200G224470H.fits 31K
a ft000601_1151_1200G224570H.fits 31K
a ft000601_1151_1200G225370H.fits 31K
a ft000601_1151_1200G225670H.fits 31K
a ft000601_1151_1200G226070H.fits 31K
a ft000601_1151_1200G226170H.fits 31K
a ft000601_1151_1200G226270H.fits 31K
a ft000601_1151_1200G226570H.fits 31K
a ft000601_1151_1200G227170H.fits 31K
a ft000601_1151_1200G227270H.fits 31K
a ft000601_1151_1200G228370H.fits 31K
a ft000601_1151_1200G228470H.fits 31K
a ft000601_1151_1200G228670H.fits 31K
a ft000601_1151_1200G229070M.fits 31K
a ft000601_1151_1200G229270H.fits 31K
a ft000601_1151_1200G229370H.fits 31K
a ft000601_1151_1200G229470H.fits 31K
a ft000601_1151_1200G229970L.fits 31K
a ft000601_1151_1200G230170M.fits 31K
a ft000601_1151_1200G230270M.fits 31K
a ft000601_1151_1200G230570H.fits 31K
a ft000601_1151_1200G230670H.fits 31K
a ft000601_1151_1200G230770H.fits 31K
a ft000601_1151_1200G231670M.fits 31K
a ft000601_1151_1200G231770M.fits 31K
a ft000601_1151_1200G232070H.fits 31K
a ft000601_1151_1200G232170H.fits 31K
a ft000601_1151_1200G232270H.fits 31K
a ft000601_1151_1200G232870H.fits 31K
a ft000601_1151_1200G233270H.fits 31K
a ft000601_1151_1200G233370H.fits 31K
a ft000601_1151_1200G233470H.fits 31K
a ft000601_1151_1200G233870H.fits 31K
a ft000601_1151_1200G233970H.fits 31K
a ft000601_1151_1200G234070H.fits 31K
a ft000601_1151_1200G234470H.fits 31K
a ft000601_1151_1200G234570H.fits 31K
a ft000601_1151_1200G234670H.fits 31K
a ft000601_1151_1200G234870H.fits 31K
a ft000601_1151_1200G235670H.fits 31K
a ft000601_1151_1200G235770H.fits 31K
a ft000601_1151_1200G235870H.fits 31K
a ft000601_1151_1200G236370H.fits 31K
a ft000601_1151_1200G236470H.fits 31K
a ft000601_1151_1200G237470H.fits 31K
a ft000601_1151_1200G237970H.fits 31K
a ft000601_1151_1200G238070H.fits 31K
a ft000601_1151_1200G238170H.fits 31K
a ft000601_1151_1200G239070M.fits 31K
a ft000601_1151_1200G239370H.fits 31K
a ft000601_1151_1200G239470H.fits 31K
a ft000601_1151_1200G239570H.fits 31K
a ft000601_1151_1200G240570H.fits 31K
a ft000601_1151_1200G240670H.fits 31K
a ft000601_1151_1200G240770H.fits 31K
a ft000601_1151_1200G241070H.fits 31K
a ft000601_1151_1200G241170H.fits 31K
a ft000601_1151_1200G241270H.fits 31K
a ft000601_1151_1200G300270H.fits 31K
a ft000601_1151_1200G300670H.fits 31K
a ft000601_1151_1200G300770H.fits 31K
a ft000601_1151_1200G300870H.fits 31K
a ft000601_1151_1200G301070H.fits 31K
a ft000601_1151_1200G301670H.fits 31K
a ft000601_1151_1200G301870H.fits 31K
a ft000601_1151_1200G301970H.fits 31K
a ft000601_1151_1200G302370H.fits 31K
a ft000601_1151_1200G302470H.fits 31K
a ft000601_1151_1200G302970M.fits 31K
a ft000601_1151_1200G303270H.fits 31K
a ft000601_1151_1200G303370H.fits 31K
a ft000601_1151_1200G303470H.fits 31K
a ft000601_1151_1200G303870H.fits 31K
a ft000601_1151_1200G303970H.fits 31K
a ft000601_1151_1200G304170H.fits 31K
a ft000601_1151_1200G304670L.fits 31K
a ft000601_1151_1200G304870M.fits 31K
a ft000601_1151_1200G304970M.fits 31K
a ft000601_1151_1200G305270M.fits 31K
a ft000601_1151_1200G306170M.fits 31K
a ft000601_1151_1200G306270M.fits 31K
a ft000601_1151_1200G306670M.fits 31K
a ft000601_1151_1200G306770M.fits 31K
a ft000601_1151_1200G308270H.fits 31K
a ft000601_1151_1200G309770H.fits 31K
a ft000601_1151_1200G309870H.fits 31K
a ft000601_1151_1200G309970H.fits 31K
a ft000601_1151_1200G310470L.fits 31K
a ft000601_1151_1200G311270H.fits 31K
a ft000601_1151_1200G311370H.fits 31K
a ft000601_1151_1200G312470H.fits 31K
a ft000601_1151_1200G312570H.fits 31K
a ft000601_1151_1200G312670H.fits 31K
a ft000601_1151_1200G312870H.fits 31K
a ft000601_1151_1200G313370H.fits 31K
a ft000601_1151_1200G313870L.fits 31K
a ft000601_1151_1200G314170H.fits 31K
a ft000601_1151_1200G314270H.fits 31K
a ft000601_1151_1200G314370H.fits 31K
a ft000601_1151_1200G314770L.fits 31K
a ft000601_1151_1200G315070H.fits 31K
a ft000601_1151_1200G315170H.fits 31K
a ft000601_1151_1200G315270H.fits 31K
a ft000601_1151_1200G315670M.fits 31K
a ft000601_1151_1200G316470M.fits 31K
a ft000601_1151_1200G316570M.fits 31K
a ft000601_1151_1200G317170M.fits 31K
a ft000601_1151_1200G317270M.fits 31K
a ft000601_1151_1200G318070H.fits 31K
a ft000601_1151_1200G318170H.fits 31K
a ft000601_1151_1200G318670H.fits 31K
a ft000601_1151_1200G318870H.fits 31K
a ft000601_1151_1200G318970H.fits 31K
a ft000601_1151_1200G319070H.fits 31K
a ft000601_1151_1200G319470H.fits 31K
a ft000601_1151_1200G319570H.fits 31K
a ft000601_1151_1200G319670H.fits 31K
a ft000601_1151_1200G319870H.fits 31K
a ft000601_1151_1200G320170H.fits 31K
a ft000601_1151_1200G320270H.fits 31K
a ft000601_1151_1200G320670H.fits 31K
a ft000601_1151_1200G320770H.fits 31K
a ft000601_1151_1200G320870H.fits 31K
a ft000601_1151_1200G321070H.fits 31K
a ft000601_1151_1200G321970H.fits 31K
a ft000601_1151_1200G322070H.fits 31K
a ft000601_1151_1200G322470H.fits 31K
a ft000601_1151_1200G322570H.fits 31K
a ft000601_1151_1200G322670H.fits 31K
a ft000601_1151_1200G323070H.fits 31K
a ft000601_1151_1200G323170H.fits 31K
a ft000601_1151_1200G323270H.fits 31K
a ft000601_1151_1200G323570H.fits 31K
a ft000601_1151_1200G324070H.fits 31K
a ft000601_1151_1200G324770H.fits 31K
a ft000601_1151_1200G324870H.fits 31K
a ft000601_1151_1200G325070H.fits 31K
a ft000601_1151_1200G325570H.fits 31K
a ft000601_1151_1200G325870H.fits 31K
a ft000601_1151_1200G326370H.fits 31K
a ft000601_1151_1200G326470H.fits 31K
a ft000601_1151_1200G326770H.fits 31K
a ft000601_1151_1200G326870H.fits 31K
a ft000601_1151_1200G327370H.fits 31K
a ft000601_1151_1200G327570H.fits 31K
a ft000601_1151_1200G328370H.fits 31K
a ft000601_1151_1200G328470H.fits 31K
a ft000601_1151_1200G328570H.fits 31K
a ft000601_1151_1200G328770H.fits 31K
a ft000601_1151_1200G329170M.fits 31K
a ft000601_1151_1200G329370H.fits 31K
a ft000601_1151_1200G329470H.fits 31K
a ft000601_1151_1200G329570H.fits 31K
a ft000601_1151_1200G329770H.fits 31K
a ft000601_1151_1200G330270L.fits 31K
a ft000601_1151_1200G330470M.fits 31K
a ft000601_1151_1200G330570M.fits 31K
a ft000601_1151_1200G330870H.fits 31K
a ft000601_1151_1200G330970H.fits 31K
a ft000601_1151_1200G331070H.fits 31K
a ft000601_1151_1200G331970M.fits 31K
a ft000601_1151_1200G332070M.fits 31K
a ft000601_1151_1200G332370H.fits 31K
a ft000601_1151_1200G332470H.fits 31K
a ft000601_1151_1200G332570H.fits 31K
a ft000601_1151_1200G333170H.fits 31K
a ft000601_1151_1200G333570H.fits 31K
a ft000601_1151_1200G333670H.fits 31K
a ft000601_1151_1200G333770H.fits 31K
a ft000601_1151_1200G334170H.fits 31K
a ft000601_1151_1200G334270H.fits 31K
a ft000601_1151_1200G334370H.fits 31K
a ft000601_1151_1200G334770H.fits 31K
a ft000601_1151_1200G334870H.fits 31K
a ft000601_1151_1200G334970H.fits 31K
a ft000601_1151_1200G336070H.fits 31K
a ft000601_1151_1200G336170H.fits 31K
a ft000601_1151_1200G336570H.fits 31K
a ft000601_1151_1200G336670H.fits 31K
a ft000601_1151_1200G336770H.fits 31K
a ft000601_1151_1200G337770H.fits 31K
a ft000601_1151_1200G338370H.fits 31K
a ft000601_1151_1200G338470H.fits 31K
a ft000601_1151_1200G339370M.fits 31K
a ft000601_1151_1200G339670H.fits 31K
a ft000601_1151_1200G339770H.fits 31K
a ft000601_1151_1200G339870H.fits 31K
a ft000601_1151_1200G340970H.fits 31K
a ft000601_1151_1200G341070H.fits 31K
a ft000601_1151_1200G341370H.fits 31K
a ft000601_1151_1200G341470H.fits 31K
a ft000601_1151_1200G341570H.fits 31K
a ft000601_1151_1200S000701M.fits 29K
a ft000601_1151_1200S001001M.fits 29K
a ft000601_1151_1200S002501M.fits 29K
a ft000601_1151_1200S004201L.fits 29K
a ft000601_1151_1200S004601L.fits 29K
a ft000601_1151_1200S005001M.fits 29K
a ft000601_1151_1200S005801L.fits 29K
a ft000601_1151_1200S009201H.fits 31K
a ft000601_1151_1200S009901M.fits 29K
a ft000601_1151_1200S010301M.fits 29K
a ft000601_1151_1200S014301L.fits 29K
a ft000601_1151_1200S015501L.fits 29K
a ft000601_1151_1200S100701M.fits 29K
a ft000601_1151_1200S101001M.fits 29K
a ft000601_1151_1200S102601M.fits 29K
a ft000601_1151_1200S104301L.fits 29K
a ft000601_1151_1200S104701L.fits 29K
a ft000601_1151_1200S105101M.fits 29K
a ft000601_1151_1200S105901L.fits 29K
a ft000601_1151_1200S109301H.fits 34K
a ft000601_1151_1200S110001M.fits 29K
a ft000601_1151_1200S110401M.fits 29K
a ft000601_1151_1200S112601H.fits 29K
a ft000601_1151_1200S114301L.fits 29K
a ft000601_1151_1200S115501L.fits 29K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (13:19:59)

-> Split threshold for SIS0=40, and SIS1=40
-> Fetching faintdfe.tbl
-> Calculating DFE values for ad78011000s000101h.unf with zerodef=1
-> Converting ad78011000s000101h.unf to ad78011000s000112h.unf
-> Calculating DFE values for ad78011000s000101h.unf with zerodef=2
-> Converting ad78011000s000101h.unf to ad78011000s000102h.unf
-> Calculating DFE values for ad78011000s000201m.unf with zerodef=1
-> Converting ad78011000s000201m.unf to ad78011000s000212m.unf
-> Calculating DFE values for ad78011000s000201m.unf with zerodef=2
-> Converting ad78011000s000201m.unf to ad78011000s000202m.unf
-> Calculating DFE values for ad78011000s000301l.unf with zerodef=1
-> Converting ad78011000s000301l.unf to ad78011000s000312l.unf
-> Calculating DFE values for ad78011000s000301l.unf with zerodef=2
-> Converting ad78011000s000301l.unf to ad78011000s000302l.unf
-> Calculating DFE values for ad78011000s100101h.unf with zerodef=1
-> Converting ad78011000s100101h.unf to ad78011000s100112h.unf
-> Calculating DFE values for ad78011000s100101h.unf with zerodef=2
-> Converting ad78011000s100101h.unf to ad78011000s100102h.unf
-> Calculating DFE values for ad78011000s100201m.unf with zerodef=1
-> Converting ad78011000s100201m.unf to ad78011000s100212m.unf
-> Calculating DFE values for ad78011000s100201m.unf with zerodef=2
-> Converting ad78011000s100201m.unf to ad78011000s100202m.unf
-> Calculating DFE values for ad78011000s100301l.unf with zerodef=1
-> Converting ad78011000s100301l.unf to ad78011000s100312l.unf
-> Calculating DFE values for ad78011000s100301l.unf with zerodef=2
-> Converting ad78011000s100301l.unf to ad78011000s100302l.unf

Calibrating the unfiltered event files (13:25:54)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft000601_1151_1200.ghf
-> stdout output from temp2gain

temp2gain V4.6
leapsec FITS data was successfully read

'ft000601_1151.1200' is successfully opened
Data Start Time is 234013892.07 (20000601 115128)
Time Margin 2.0 sec included
Sync error detected in 7923 th SF
Sync error detected in 7929 th SF
Sync error detected in 7930 th SF
Sync error detected in 7931 th SF
Sync error detected in 7932 th SF
Sync error detected in 7935 th SF
Sync error detected in 8089 th SF
Sync error detected in 8090 th SF
Sync error detected in 8096 th SF
Sync error detected in 11529 th SF
Sync error detected in 15066 th SF
Sync error detected in 15067 th SF
Sync error detected in 15068 th SF
Sync error detected in 27983 th SF
Sync error detected in 27984 th SF
Sync error detected in 27990 th SF
Sync error detected in 37062 th SF
Sync error detected in 45772 th SF
Sync error detected in 45794 th SF
Sync error detected in 46416 th SF
Sync error detected in 46418 th SF
Sync error detected in 47956 th SF
Sync error detected in 47957 th SF
Sync error detected in 47958 th SF
Sync error detected in 50052 th SF
Sync error detected in 50057 th SF
Sync error detected in 50059 th SF
Sync error detected in 50061 th SF
Sync error detected in 50065 th SF
Sync error detected in 50188 th SF
Sync error detected in 50189 th SF
Sync error detected in 50190 th SF
Sync error detected in 50191 th SF
Sync error detected in 50195 th SF
Sync error detected in 50196 th SF
Sync error detected in 53684 th SF
Sync error detected in 53687 th SF
Sync error detected in 55365 th SF
'ft000601_1151.1200' EOF detected, sf=62484
Data End Time is 234273557.25 (20000604 115913)
Warning: ascatime of the latest parameters for GIS2 in the calibration file is 212889604.00
Warning: ascatime of the latest parameters for GIS3 in the calibration file is 212889604.00
Gain History is written in ft000601_1151_1200.ghf

E2: Error from FTOOL temp2gain - exit status 0

Stack Trace:

File: Util/Tool.pm Line: 449
File: Util/Ftool.pm Line: 243
File: Util/Tool.pm Line: 388
File: Util/Tool.pm Line: 347
File: Subs/Linearize.pm Line: 204
File: Subs/Linearize.pm Line: 62
File: Subs/Sub.pm Line: 358
File: proc8.0.2/ad0 Line: 78

-> Command: /aps/tools/ftools/ftools.5.0.b/SunOS_5.6_sparc/bin/temp2gain
-> Contents of temp2gain.par

frffile,s,a,"ft000601_1151.1200",,,"FRF file name"
histfile,s,a,"gis_temp2gain.fits",,,"Input long term gain parameter file"
outfile,s,a,"ft000601_1151_1200.ghf",,,"Output FITS file name"
tblfile,s,a,"gain_hist_table.tmp",,,"Output text file name"
g2hfile,s,a,"ft940630_0738.1320.g2h",,,"GIS2 LDHIT output text file name"
g3hfile,s,a,"ft940630_0738.1320.g3h",,,"GIS3 LDHIT output text file name"
leapsec,s,a,"leapsec.fits",,,"leap second FITS file"
type,i,a,0,,,"Method(0:Auto, 1:Linear Interpolation, 2:Analytic function)"
steptime,r,a,600,,,"Time interval(sec)"
version,i,h,4,,,"Version Number of Gainhistory FITS File"
ldh_flag,b,h,no,,,"Apply gain correction with LDHIT counting rate"
nor_fac2,r,h,1,,,"Normalization Factor GIS S2"
nor_fac3,r,h,1,,,"Normalization Factor GIS S3"
mergesec,r,h,2,,,"Margin Seconds"
clobber,b,h,no,,,"Overwrite output file if exists?"
mode,s,h,"h",,,""

-> stderr output from temp2gain

Warning: ascatime of the latest parameters for GIS2 in the calibration file is 223776004.00
Warning: ascatime of the latest parameters for GIS3 in the calibration file is 223776004.00

-> Generating attitude correction table ad78011000_001_bp4.txt
-> Extracting info from ft000601_1151_1200CMHK.fits
-> Using BP4 between 89.8922010484427 and 99.0079111850033
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad78011000g200170h.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad78011000g200170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g200270m.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g200270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g200370l.unf
-> Extracting part of ad78011000g200370l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000g200370l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          92921     92704              0       217         0         0
 Writing events file
  92704 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         92921     92704              0       217         0         0
   in  32138.     seconds

-> Extracting part of ad78011000g200370l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000g200370l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          92921       217              0     92704         0         0
 Writing events file
    217 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         92921       217              0     92704         0         0
   in  54.000     seconds

-> Adding ad78011000g200370l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000g200370l.unf_no_att 37K

-> Removed 54 seconds from ad78011000g200370l.unf which were not covered by fa000601_1151.1200
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g200370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g200470m.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g200470m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g200570l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g200570l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g200670l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g200670l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g300170h.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad78011000g300170h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g300270m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g300270m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g300370l.unf
-> Extracting part of ad78011000g300370l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000g300370l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          93221     93007              0       214         0         0
 Writing events file
  93007 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93221     93007              0       214         0         0
   in  32138.     seconds

-> Extracting part of ad78011000g300370l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000g300370l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          93221       214              0     93007         0         0
 Writing events file
    214 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93221       214              0     93007         0         0
   in  54.000     seconds

-> Adding ad78011000g300370l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000g300370l.unf_no_att 37K

-> Removed 54 seconds from ad78011000g300370l.unf which were not covered by fa000601_1151.1200
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g300370l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g300470m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g300470m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g300570l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g300570l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000g300670l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad78011000g300670l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000101h.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad78011000s000101h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000102h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000112h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000112h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000201m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000201m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000202m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000212m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000212m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000301l.unf
-> Extracting part of ad78011000s000301l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s000301l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          74755     74667              0        88         0         0
 Writing events file
  74667 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         74755     74667              0        88         0         0
   in  39762.     seconds

-> Extracting part of ad78011000s000301l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s000301l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          74755        88              0     74667         0         0
 Writing events file
     88 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         74755        88              0     74667         0         0
   in  45.875     seconds

-> Adding ad78011000s000301l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000s000301l.unf_no_att 31K

-> Removed 46 seconds from ad78011000s000301l.unf which were not covered by fa000601_1151.1200
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000301l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000302l.unf
-> Extracting part of ad78011000s000302l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s000302l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          10709     10709              0         0         0         0
 Writing events file
  10709 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10709     10709              0         0         0         0
   in  39762.     seconds

-> Extracting part of ad78011000s000302l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s000302l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          10709         0              0     10709         0         0
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10709         0              0     10709         0         0
   in  45.875     seconds

-> Adding ad78011000s000302l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000s000302l.unf_no_att 26K

-> Removed 46 seconds from ad78011000s000302l.unf which were not covered by fa000601_1151.1200
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s000312l.unf
-> Extracting part of ad78011000s000312l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s000312l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          10824     10824              0         0         0         0
 Writing events file
  10824 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10824     10824              0         0         0         0
   in  39762.     seconds

-> Extracting part of ad78011000s000312l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s000312l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          10824         0              0     10824         0         0
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10824         0              0     10824         0         0
   in  45.875     seconds

-> Adding ad78011000s000312l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000s000312l.unf_no_att 26K

-> Removed 46 seconds from ad78011000s000312l.unf which were not covered by fa000601_1151.1200
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s000312l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100101h.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100101h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100102h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100102h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100112h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100112h.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100201m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100201m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100202m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100202m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100212m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100212m.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100301l.unf
-> Extracting part of ad78011000s100301l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s100301l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          75576     75488              0        88         0         0
 Writing events file
  75488 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         75576     75488              0        88         0         0
   in  39762.     seconds

-> Extracting part of ad78011000s100301l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s100301l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          75576        88              0     75488         0         0
 Writing events file
     88 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         75576        88              0     75488         0         0
   in  45.875     seconds

-> Adding ad78011000s100301l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000s100301l.unf_no_att 31K

-> Removed 46 seconds from ad78011000s100301l.unf which were not covered by fa000601_1151.1200
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100301l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100302l.unf
-> Extracting part of ad78011000s100302l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s100302l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          17427     17427              0         0         0         0
 Writing events file
  17427 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17427     17427              0         0         0         0
   in  39762.     seconds

-> Extracting part of ad78011000s100302l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s100302l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          17427         0              0     17427         0         0
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17427         0              0     17427         0         0
   in  45.875     seconds

-> Adding ad78011000s100302l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000s100302l.unf_no_att 26K

-> Removed 46 seconds from ad78011000s100302l.unf which were not covered by fa000601_1151.1200
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100302l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

-> Preparing to run ascalin on ad78011000s100312l.unf
-> Extracting part of ad78011000s100312l.unf covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s100312l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          17507     17507              0         0         0         0
 Writing events file
  17507 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17507     17507              0         0         0         0
   in  39762.     seconds

-> Extracting part of ad78011000s100312l.unf not covered by fa000601_1151.1200
-> stdout output from extractor

extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad78011000s100312l.unf
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
          17507         0              0     17507         0         0
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17507         0              0     17507         0         0
   in  45.875     seconds

-> Adding ad78011000s100312l.unf_no_att to ad78011000_scraps.tar
-> stdout output from tar

a ad78011000s100312l.unf_no_att 26K

-> Removed 46 seconds from ad78011000s100312l.unf which were not covered by fa000601_1151.1200
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad78011000s100312l.unf
-> stdout output from ascalin

ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
 Detected gap > 15min in attitude file:    234079042.36589
 Detected gap > 15min in attitude file:    234106290.28102
 Detected gap > 15min in attitude file:    234156538.62292
 Detected gap > 15min in attitude file:    234210506.45299
 Detected gap > 15min in attitude file:    234241109.85653
 Detected gap > 15min in attitude file:    234246997.83799
 
Detected gap > 15min in attitude file:

Creating filter files (13:53:4)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.251 to working directory
-> Creating ft000601_1151_1200.mkf
-> stdout output from mkfilter2

 
leapsec FITS data was successfully read

S0-HK file: ft000601_1151_1200S0HK.fits

S1-HK file: ft000601_1151_1200S1HK.fits

G2-HK file: ft000601_1151_1200G2HK.fits

G3-HK file: ft000601_1151_1200G3HK.fits

Date and time are: 2000-06-01 11:51:24  mjd=51696.494029

Orbit file name is frf.orbit.251

Epoch of Orbital Elements: 2000-06-01 11:00:00

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa000601_1151.1200

output FITS File: ft000601_1151_1200.mkf

mkfilter2: Warning, faQparam error: time= 2.342735160656e+08 outside range of attitude file

           Euler angles undefined for this bin

mkfilter2: Warning, faQparam error: time= 2.342735480656e+08 outside range of attitude file

           Euler angles undefined for this bin

Total 8115 Data bins were processed.

-> Adding deadtime to ft000601_1151_1200.mkf
-> Adding ad78011000_s0.dfe to ft000601_1151_1200.mkf
-> Adding ad78011000_s1.dfe to ft000601_1151_1200.mkf
-> Plotting quantities from ft000601_1151_1200.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (14:58:52)

-> Skipping ad78011000s000101h.unf because of mode
-> Filtering ad78011000s000102h.unf into ad78011000s000102h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   37658.636
 The mean of the selected column is                  19.809909
 The standard deviation of the selected column is    8.1382061
 The minimum of selected column is                   2.4752359
 The maximum of selected column is                   102.18781
 The number of points used in calculation is             1901

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.2 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.11E+06   284501 0100
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         274181    180891              0     93290         0         0
 Writing events file
 180891 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        274181    180891              0     93290         0         0
   in  61910.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       180891
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2       28368
 Flickering pixels iter, pixels & cnts :   1          16         110
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           18
 Number of (internal) image counts   :       180891
 Number of image cts rejected (N, %) :        2847815.74
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           18            0            0
 
 Image counts      :             0       180891            0            0
 Image cts rejected:             0        28478            0            0
 Image cts rej (%) :          0.00        15.74         0.00         0.00
 
    filtering data...
 
 Total counts      :             0       180891            0            0
 Total cts rejected:             0        28478            0            0
 Total cts rej (%) :          0.00        15.74         0.00         0.00
 
 Number of clean counts accepted  :       152413
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           18
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad78011000s000102h.evt use_events=no
Wrote cleaned events file to ad78011000s000102h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad78011000s000112h.unf into ad78011000s000112h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   37658.636
 The mean of the selected column is                  19.809909
 The standard deviation of the selected column is    8.1382061
 The minimum of selected column is                   2.4752359
 The maximum of selected column is                   102.18781
 The number of points used in calculation is             1901

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.2 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:27    0.11E+06   285752 0100
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         275115    181436              0     93679         0         0
 Writing events file
 181436 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        275115    181436              0     93679         0         0
   in  61910.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       181436
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2       28368
 Flickering pixels iter, pixels & cnts :   1          14         102
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           16
 Number of (internal) image counts   :       181436
 Number of image cts rejected (N, %) :        2847015.69
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           16            0            0
 
 Image counts      :             0       181436            0            0
 Image cts rejected:             0        28470            0            0
 Image cts rej (%) :          0.00        15.69         0.00         0.00
 
    filtering data...
 
 Total counts      :             0       181436            0            0
 Total cts rejected:             0        28470            0            0
 Total cts rej (%) :          0.00        15.69         0.00         0.00
 
 Number of clean counts accepted  :       152966
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           16
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad78011000s000112h.evt use_events=no
Wrote cleaned events file to ad78011000s000112h.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Skipping ad78011000s000201m.unf because of mode
-> Filtering ad78011000s000202m.unf into ad78011000s000202m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   15529.905
 The mean of the selected column is                  19.436677
 The standard deviation of the selected column is    7.1560070
 The minimum of selected column is                   3.4687607
 The maximum of selected column is                   46.437645
 The number of points used in calculation is              799

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<40.9 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.58E+05   116141 0100
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         111962     67917              0     44045         0         0
 Writing events file
  67917 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        111962     67917              0     44045         0         0
   in  25761.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        67917
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2       11891
 Flickering pixels iter, pixels & cnts :   1          11          63
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           13
 Number of (internal) image counts   :        67917
 Number of image cts rejected (N, %) :        1195417.60
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           13            0            0
 
 Image counts      :             0        67917            0            0
 Image cts rejected:             0        11954            0            0
 Image cts rej (%) :          0.00        17.60         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        67917            0            0
 Total cts rejected:             0        11954            0            0
 Total cts rej (%) :          0.00        17.60         0.00         0.00
 
 Number of clean counts accepted  :        55963
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           13
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad78011000s000202m.evt use_events=no
Wrote cleaned events file to ad78011000s000202m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Filtering ad78011000s000212m.unf into ad78011000s000212m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   15529.905
 The mean of the selected column is                  19.436677
 The standard deviation of the selected column is    7.1560070
 The minimum of selected column is                   3.4687607
 The maximum of selected column is                   46.437645
 The number of points used in calculation is              799

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<40.9 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.58E+05   116702 0100
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000212m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         112355     68144              0     44211         0         0
 Writing events file
  68144 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        112355     68144              0     44211         0         0
   in  25761.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        68144
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2       11891
 Flickering pixels iter, pixels & cnts :   1          11          63
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           13
 Number of (internal) image counts   :        68144
 Number of image cts rejected (N, %) :        1195417.54
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           13            0            0
 
 Image counts      :             0        68144            0            0
 Image cts rejected:             0        11954            0            0
 Image cts rej (%) :          0.00        17.54         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        68144            0            0
 Total cts rejected:             0        11954            0            0
 Total cts rej (%) :          0.00        17.54         0.00         0.00
 
 Number of clean counts accepted  :        56190
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           13
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s000212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad78011000s000212m.evt use_events=no
Wrote cleaned events file to ad78011000s000212m.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Skipping ad78011000s000301l.unf because of mode
-> Filtering ad78011000s000302l.unf into ad78011000s000302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      LOW         2000-06-01  17:58:35    0.40E+05    10709 0100
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad78011000s000302l.evt use_events=no
Wrote cleaned events file to ad78011000s000302l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting ad78011000s000302l.evt since it contains 0 events
-> Filtering ad78011000s000312l.unf into ad78011000s000312l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     LOW         2000-06-01  17:58:35    0.40E+05    10824 0100
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad78011000s000312l.evt use_events=no
Wrote cleaned events file to ad78011000s000312l.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting ad78011000s000312l.evt since it contains 0 events
-> Skipping ad78011000s100101h.unf because of mode
-> Filtering ad78011000s100102h.unf into ad78011000s100102h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   56132.775
 The mean of the selected column is                  29.481499
 The standard deviation of the selected column is    12.643010
 The minimum of selected column is                   3.4423313
 The maximum of selected column is                   154.37547
 The number of points used in calculation is             1904

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<67.4 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.11E+06   269545 0001
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         258799    166620              0     92179         0         0
 Writing events file
 166620 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        258799    166620              0     92179         0         0
   in  62050.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       166620
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4       46756
 Flickering pixels iter, pixels & cnts :   1          12         258
 
 Number of pixels rejected           :           16
 Number of (internal) image counts   :       166620
 Number of image cts rejected (N, %) :        4701428.22
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           16
 
 Image counts      :             0            0            0       166620
 Image cts rejected:             0            0            0        47014
 Image cts rej (%) :          0.00         0.00         0.00        28.22
 
    filtering data...
 
 Total counts      :             0            0            0       166620
 Total cts rejected:             0            0            0        47014
 Total cts rej (%) :          0.00         0.00         0.00        28.22
 
 Number of clean counts accepted  :       119606
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           16
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad78011000s100102h.evt use_events=no
Wrote cleaned events file to ad78011000s100102h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad78011000s100112h.unf into ad78011000s100112h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   56132.775
 The mean of the selected column is                  29.481499
 The standard deviation of the selected column is    12.643010
 The minimum of selected column is                   3.4423313
 The maximum of selected column is                   154.37547
 The number of points used in calculation is             1904

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<67.4 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:23    0.11E+06   270223 0001
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         259348    166904              0     92444         0         0
 Writing events file
 166904 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        259348    166904              0     92444         0         0
   in  62050.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :       166904
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4       46766
 Flickering pixels iter, pixels & cnts :   1          13         261
 
 Number of pixels rejected           :           17
 Number of (internal) image counts   :       166904
 Number of image cts rejected (N, %) :        4702728.18
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           17
 
 Image counts      :             0            0            0       166904
 Image cts rejected:             0            0            0        47027
 Image cts rej (%) :          0.00         0.00         0.00        28.18
 
    filtering data...
 
 Total counts      :             0            0            0       166904
 Total cts rejected:             0            0            0        47027
 Total cts rej (%) :          0.00         0.00         0.00        28.18
 
 Number of clean counts accepted  :       119877
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           17
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad78011000s100112h.evt use_events=no
Wrote cleaned events file to ad78011000s100112h.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Skipping ad78011000s100201m.unf because of mode
-> Filtering ad78011000s100202m.unf into ad78011000s100202m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   21046.031
 The mean of the selected column is                  27.728632
 The standard deviation of the selected column is    10.518130
 The minimum of selected column is                   2.8541980
 The maximum of selected column is                   70.656471
 The number of points used in calculation is              759

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<59.2 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.58E+05   118544 0001
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         112490     60095              0     52395         0         0
 Writing events file
  60095 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        112490     60095              0     52395         0         0
   in  24352.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        60095
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4       18364
 Flickering pixels iter, pixels & cnts :   1          10         107
 
 Number of pixels rejected           :           14
 Number of (internal) image counts   :        60095
 Number of image cts rejected (N, %) :        1847130.74
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           14
 
 Image counts      :             0            0            0        60095
 Image cts rejected:             0            0            0        18471
 Image cts rej (%) :          0.00         0.00         0.00        30.74
 
    filtering data...
 
 Total counts      :             0            0            0        60095
 Total cts rejected:             0            0            0        18471
 Total cts rej (%) :          0.00         0.00         0.00        30.74
 
 Number of clean counts accepted  :        41624
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           14
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad78011000s100202m.evt use_events=no
Wrote cleaned events file to ad78011000s100202m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Filtering ad78011000s100212m.unf into ad78011000s100212m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   21046.031
 The mean of the selected column is                  27.728632
 The standard deviation of the selected column is    10.518130
 The minimum of selected column is                   2.8541980
 The maximum of selected column is                   70.656471
 The number of points used in calculation is              759

-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<59.2 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.58E+05   118884 0001
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100212m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
         112750     60210              0     52540         0         0
 Writing events file
  60210 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        112750     60210              0     52540         0         0
   in  24352.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        60210
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4       18367
 Flickering pixels iter, pixels & cnts :   1          11         110
 
 Number of pixels rejected           :           15
 Number of (internal) image counts   :        60210
 Number of image cts rejected (N, %) :        1847730.69
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           15
 
 Image counts      :             0            0            0        60210
 Image cts rejected:             0            0            0        18477
 Image cts rej (%) :          0.00         0.00         0.00        30.69
 
    filtering data...
 
 Total counts      :             0            0            0        60210
 Total cts rejected:             0            0            0        18477
 Total cts rej (%) :          0.00         0.00         0.00        30.69
 
 Number of clean counts accepted  :        41733
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           15
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s100212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad78011000s100212m.evt use_events=no
Wrote cleaned events file to ad78011000s100212m.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Skipping ad78011000s100301l.unf because of mode
-> Filtering ad78011000s100302l.unf into ad78011000s100302l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      LOW         2000-06-01  17:58:35    0.40E+05    17427 0001
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad78011000s100302l.evt use_events=no
Wrote cleaned events file to ad78011000s100302l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting ad78011000s100302l.evt since it contains 0 events
-> Filtering ad78011000s100312l.unf into ad78011000s100312l.evt
-> Using the following selection criteria:

(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     LOW         2000-06-01  17:58:35    0.40E+05    17507 0001
Processing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data22/seq_proc/ad0_78011000.001/screen_in_event.xs
    reading data file: /data/data22/seq_proc/ad0_78011000.001/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad78011000s100312l.evt use_events=no
Wrote cleaned events file to ad78011000s100312l.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting ad78011000s100312l.evt since it contains 0 events
-> Filtering ad78011000g200170h.unf into ad78011000g200170h.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         234304     96156          53218     84930         0         0
 Writing events file
  96156 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        234304     96156          53218     84930         0         0
   in  66057.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       96156               93179              2977
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad78011000g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad78011000g200270m.unf into ad78011000g200270m.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         159863     44579          36715     78569         0         0
 Writing events file
  44579 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        159863     44579          36715     78569         0         0
   in  32914.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       44579               43062              1517
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad78011000g200270m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad78011000g200370l.unf into ad78011000g200370l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    92704     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          92704       542          23460     68702         0         0
 Writing events file
    542 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         92704       542          23460     68702         0         0
   in  357.46     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         542                 520                22
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad78011000g200370l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad78011000g200470m.unf into ad78011000g200470m.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3097     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3097       257            656      2184         0         0
 Writing events file
    257 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3097       257            656      2184         0         0
   in  208.00     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         257                 244                13
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g200470m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad78011000g200470m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Filtering ad78011000g200570l.unf into ad78011000g200570l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2051     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200570l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g200570l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad78011000g200570l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad78011000g200570l.evt since it contains 0 events
-> Filtering ad78011000g200670l.unf into ad78011000g200670l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      532     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200670l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g200670l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad78011000g200670l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad78011000g200670l.evt since it contains 0 events
-> Filtering ad78011000g300170h.unf into ad78011000g300170h.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         240563    105448          43063     92052         0         0
 Writing events file
 105448 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        240563    105448          43063     92052         0         0
   in  66045.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
      105448              102184              3264
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad78011000g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad78011000g300270m.unf into ad78011000g300270m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         163462     48678          29853     84931         0         0
 Writing events file
  48678 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        163462     48678          29853     84931         0         0
   in  32946.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
       48678               47079              1599
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad78011000g300270m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad78011000g300370l.unf into ad78011000g300370l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    93007     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          93007       578          18783     73646         0         0
 Writing events file
    578 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93007       578          18783     73646         0         0
   in  357.46     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         578                 559                19
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad78011000g300370l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad78011000g300470m.unf into ad78011000g300470m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3211     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3211       250            588      2373         0         0
 Writing events file
    250 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3211       250            588      2373         0         0
   in  208.00     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
         250                 243                 7
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g300470m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad78011000g300470m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Filtering ad78011000g300570l.unf into ad78011000g300570l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2042     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300570l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g300570l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad78011000g300570l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad78011000g300570l.evt since it contains 0 events
-> Filtering ad78011000g300670l.unf into ad78011000g300670l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:

(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      516     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300670l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA > read events ad78011000g300670l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.b/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad78011000g300670l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad78011000g300670l.evt since it contains 0 events

Generating images and exposure maps (15:16:48)

-> Generating exposure map ad78011000g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)

-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g200170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0284
 Mean   RA/DEC/ROLL :      340.7025      29.7607     292.0284
 Pnt    RA/DEC/ROLL :      340.6296      29.5891     292.0284
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :           123
 Total GTI (secs)   :     66056.852
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       8663.98      8663.98
  20 Percent Complete: Total/live time:      14750.78     14750.78
  30 Percent Complete: Total/live time:      20877.51     20877.51
  40 Percent Complete: Total/live time:      28378.84     28378.84
  50 Percent Complete: Total/live time:      34792.65     34792.65
  60 Percent Complete: Total/live time:      41327.59     41327.59
  70 Percent Complete: Total/live time:      48138.40     48138.40
  80 Percent Complete: Total/live time:      53629.38     53629.38
  90 Percent Complete: Total/live time:      60434.24     60434.24
 100 Percent Complete: Total/live time:      66056.86     66056.86
 
 Number of attitude steps  used:          179
 Number of attitude steps avail:       182695
 Mean RA/DEC pixel offset:      -12.3137      -4.1481
 
    writing expo file: ad78011000g200170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g200170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g200170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179     92861            318         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93179     92861            318         0         0         0
   in  66057.     seconds
 Image            has    92861 counts for  1.406     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179     62555            318         0         0     30306
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93179     62555            318         0         0     30306
   in  66057.     seconds
 Image            has    62555 counts for 0.9470     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179     30630            318         0         0     62231
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93179     30630            318         0         0     62231
   in  66057.     seconds
 Image            has    30630 counts for 0.4637     counts/sec
 Command not found; type ? for a command listing
!ad78011000g200170h:ASCA >
!ad78011000g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g200170h:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200170h:ASCA > read events ad78011000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200170h:ASCA-GIS2-PH > set image sky
!ad78011000g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad78011000g200170h:ASCA-GIS2-PH > extract image
!ad78011000g200170h:ASCA-GIS2-PH > save image outfile=ad78011000g200170_all.img
Wrote image to file ad78011000g200170_all.img
!ad78011000g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad78011000g200170h:ASCA-GIS2-PH > extract image
!ad78011000g200170h:ASCA-GIS2-PH > save image outfile=ad78011000g200170_lo.img
Wrote image to file ad78011000g200170_lo.img
!ad78011000g200170h:ASCA-GIS2-PH > clear pha_cut
!ad78011000g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g200170h:ASCA-GIS2-PH > extract image
!ad78011000g200170h:ASCA-GIS2-PH > save image outfile=ad78011000g200170_hi.img
Wrote image to file ad78011000g200170_hi.img
!ad78011000g200170h:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad78011000g200270.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g200270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g200270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0298
 Mean   RA/DEC/ROLL :      340.7022      29.7564     292.0298
 Pnt    RA/DEC/ROLL :      340.6996      29.8072     292.0298
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :            37
 Total GTI (secs)   :     32913.992
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:      10039.25     10039.25
  20 Percent Complete: Total/live time:      10039.25     10039.25
  30 Percent Complete: Total/live time:      11403.24     11403.24
  40 Percent Complete: Total/live time:      13536.43     13536.43
  50 Percent Complete: Total/live time:      18464.45     18464.45
  60 Percent Complete: Total/live time:      20271.44     20271.44
  70 Percent Complete: Total/live time:      25265.17     25265.17
  80 Percent Complete: Total/live time:      26992.17     26992.17
  90 Percent Complete: Total/live time:      30922.79     30922.79
 100 Percent Complete: Total/live time:      32914.00     32914.00
 
 Number of attitude steps  used:           54
 Number of attitude steps avail:        31085
 Mean RA/DEC pixel offset:      -11.9131      -3.8021
 
    writing expo file: ad78011000g200270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g200270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g200270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062     42881            181         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         43062     42881            181         0         0         0
   in  32914.     seconds
 Image            has    42881 counts for  1.303     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062     28318            181         0         0     14563
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         43062     28318            181         0         0     14563
   in  32914.     seconds
 Image            has    28318 counts for 0.8604     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062     14725            181         0         0     28156
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         43062     14725            181         0         0     28156
   in  32914.     seconds
 Image            has    14725 counts for 0.4474     counts/sec
 Command not found; type ? for a command listing
!ad78011000g200270m:ASCA >
!ad78011000g200270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g200270m:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200270m:ASCA > read events ad78011000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200270m:ASCA-GIS2-PH > set image sky
!ad78011000g200270m:ASCA-GIS2-PH > filter region corner_point.reg
!ad78011000g200270m:ASCA-GIS2-PH > extract image
!ad78011000g200270m:ASCA-GIS2-PH > save image outfile=ad78011000g200270_all.img
Wrote image to file ad78011000g200270_all.img
!ad78011000g200270m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad78011000g200270m:ASCA-GIS2-PH > extract image
!ad78011000g200270m:ASCA-GIS2-PH > save image outfile=ad78011000g200270_lo.img
Wrote image to file ad78011000g200270_lo.img
!ad78011000g200270m:ASCA-GIS2-PH > clear pha_cut
!ad78011000g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g200270m:ASCA-GIS2-PH > extract image
!ad78011000g200270m:ASCA-GIS2-PH > save image outfile=ad78011000g200270_hi.img
Wrote image to file ad78011000g200270_hi.img
!ad78011000g200270m:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad78011000g200370.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g200370l.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g200370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0298
 Mean   RA/DEC/ROLL :      340.7019      29.7577     292.0298
 Pnt    RA/DEC/ROLL :      340.6987      29.8073     292.0298
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :             9
 Total GTI (secs)   :       357.463
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         55.87        55.87
  20 Percent Complete: Total/live time:        111.57       111.57
  30 Percent Complete: Total/live time:        111.57       111.57
  40 Percent Complete: Total/live time:        254.88       254.88
  50 Percent Complete: Total/live time:        254.88       254.88
  60 Percent Complete: Total/live time:        278.51       278.51
  70 Percent Complete: Total/live time:        278.51       278.51
  80 Percent Complete: Total/live time:        334.12       334.12
  90 Percent Complete: Total/live time:        334.12       334.12
 100 Percent Complete: Total/live time:        357.46       357.46
 
 Number of attitude steps  used:           13
 Number of attitude steps avail:         7259
 Mean RA/DEC pixel offset:      -11.2154      -3.6278
 
    writing expo file: ad78011000g200370.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g200370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g200370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520       519              1         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           520       519              1         0         0         0
   in  357.46     seconds
 Image            has      519 counts for  1.452     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520       342              1         0         0       177
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           520       342              1         0         0       177
   in  357.46     seconds
 Image            has      342 counts for 0.9567     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520       178              1         0         0       341
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           520       178              1         0         0       341
   in  357.46     seconds
 Image            has      178 counts for 0.4980     counts/sec
 Command not found; type ? for a command listing
!ad78011000g200370l:ASCA >
!ad78011000g200370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g200370l:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200370l:ASCA > read events ad78011000g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200370l:ASCA-GIS2-PH > set image sky
!ad78011000g200370l:ASCA-GIS2-PH > filter region corner_point.reg
!ad78011000g200370l:ASCA-GIS2-PH > extract image
!ad78011000g200370l:ASCA-GIS2-PH > save image outfile=ad78011000g200370_all.img
Wrote image to file ad78011000g200370_all.img
!ad78011000g200370l:ASCA-GIS2-PH > filter pha_cut 0 170
!ad78011000g200370l:ASCA-GIS2-PH > extract image
!ad78011000g200370l:ASCA-GIS2-PH > save image outfile=ad78011000g200370_lo.img
Wrote image to file ad78011000g200370_lo.img
!ad78011000g200370l:ASCA-GIS2-PH > clear pha_cut
!ad78011000g200370l:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g200370l:ASCA-GIS2-PH > extract image
!ad78011000g200370l:ASCA-GIS2-PH > save image outfile=ad78011000g200370_hi.img
Wrote image to file ad78011000g200370_hi.img
!ad78011000g200370l:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad78011000g200470.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g200470m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g200470m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0299
 Mean   RA/DEC/ROLL :      340.7023      29.7559     292.0299
 Pnt    RA/DEC/ROLL :      340.6980      29.8078     292.0299
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :             9
 Total GTI (secs)   :       208.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         48.00        48.00
  20 Percent Complete: Total/live time:         48.00        48.00
  30 Percent Complete: Total/live time:         67.00        67.00
  40 Percent Complete: Total/live time:         91.00        91.00
  50 Percent Complete: Total/live time:        112.00       112.00
  60 Percent Complete: Total/live time:        144.00       144.00
  70 Percent Complete: Total/live time:        155.00       155.00
  80 Percent Complete: Total/live time:        176.00       176.00
  90 Percent Complete: Total/live time:        208.00       208.00
 100 Percent Complete: Total/live time:        208.00       208.00
 
 Number of attitude steps  used:           15
 Number of attitude steps avail:         4215
 Mean RA/DEC pixel offset:      -11.3036      -3.5014
 
    writing expo file: ad78011000g200470.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g200470m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g200470m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      244     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244       243              1         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           244       243              1         0         0         0
   in  208.00     seconds
 Image            has      243 counts for  1.168     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244       150              1         0         0        93
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           244       150              1         0         0        93
   in  208.00     seconds
 Image            has      150 counts for 0.7212     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244        95              1         0         0       148
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           244        95              1         0         0       148
   in  208.00     seconds
 Image            has       95 counts for 0.4567     counts/sec
 Command not found; type ? for a command listing
!ad78011000g200470m:ASCA >
!ad78011000g200470m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g200470m:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200470m:ASCA > read events ad78011000g200470m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g200470m:ASCA-GIS2-PH > set image sky
!ad78011000g200470m:ASCA-GIS2-PH > filter region corner_point.reg
!ad78011000g200470m:ASCA-GIS2-PH > extract image
!ad78011000g200470m:ASCA-GIS2-PH > save image outfile=ad78011000g200470_all.img
Wrote image to file ad78011000g200470_all.img
!ad78011000g200470m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad78011000g200470m:ASCA-GIS2-PH > extract image
!ad78011000g200470m:ASCA-GIS2-PH > save image outfile=ad78011000g200470_lo.img
Wrote image to file ad78011000g200470_lo.img
!ad78011000g200470m:ASCA-GIS2-PH > clear pha_cut
!ad78011000g200470m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g200470m:ASCA-GIS2-PH > extract image
!ad78011000g200470m:ASCA-GIS2-PH > save image outfile=ad78011000g200470_hi.img
Wrote image to file ad78011000g200470_hi.img
!ad78011000g200470m:ASCA-GIS2-PH > exit save_session=no

-> Generating exposure map ad78011000g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:

-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)

-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g300170h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0244
 Mean   RA/DEC/ROLL :      340.6942      29.7840     292.0244
 Pnt    RA/DEC/ROLL :      340.6376      29.5653     292.0244
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :           121
 Total GTI (secs)   :     66044.852
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       8659.98      8659.98
  20 Percent Complete: Total/live time:      13870.28     13870.28
  30 Percent Complete: Total/live time:      20877.51     20877.51
  40 Percent Complete: Total/live time:      28378.84     28378.84
  50 Percent Complete: Total/live time:      34782.65     34782.65
  60 Percent Complete: Total/live time:      41317.59     41317.59
  70 Percent Complete: Total/live time:      48128.40     48128.40
  80 Percent Complete: Total/live time:      53617.38     53617.38
  90 Percent Complete: Total/live time:      60422.24     60422.24
 100 Percent Complete: Total/live time:      66044.86     66044.86
 
 Number of attitude steps  used:          179
 Number of attitude steps avail:       182684
 Mean RA/DEC pixel offset:       -0.2350      -2.9483
 
    writing expo file: ad78011000g300170.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g300170h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g300170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184    101870            314         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        102184    101870            314         0         0         0
   in  66045.     seconds
 Image            has   101870 counts for  1.542     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184     68471            314         0         0     33399
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        102184     68471            314         0         0     33399
   in  66045.     seconds
 Image            has    68471 counts for  1.037     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184     33767            314         0         0     68103
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        102184     33767            314         0         0     68103
   in  66045.     seconds
 Image            has    33767 counts for 0.5113     counts/sec
 Command not found; type ? for a command listing
!ad78011000g300170h:ASCA >
!ad78011000g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g300170h:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300170h:ASCA > read events ad78011000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300170h:ASCA-GIS3-PH > set image sky
!ad78011000g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad78011000g300170h:ASCA-GIS3-PH > extract image
!ad78011000g300170h:ASCA-GIS3-PH > save image outfile=ad78011000g300170_all.img
Wrote image to file ad78011000g300170_all.img
!ad78011000g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad78011000g300170h:ASCA-GIS3-PH > extract image
!ad78011000g300170h:ASCA-GIS3-PH > save image outfile=ad78011000g300170_lo.img
Wrote image to file ad78011000g300170_lo.img
!ad78011000g300170h:ASCA-GIS3-PH > clear pha_cut
!ad78011000g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g300170h:ASCA-GIS3-PH > extract image
!ad78011000g300170h:ASCA-GIS3-PH > save image outfile=ad78011000g300170_hi.img
Wrote image to file ad78011000g300170_hi.img
!ad78011000g300170h:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad78011000g300270.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g300270m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g300270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0259
 Mean   RA/DEC/ROLL :      340.6942      29.7802     292.0259
 Pnt    RA/DEC/ROLL :      340.7077      29.7834     292.0259
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :            38
 Total GTI (secs)   :     32945.992
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:      10071.25     10071.25
  20 Percent Complete: Total/live time:      10071.25     10071.25
  30 Percent Complete: Total/live time:      11435.24     11435.24
  40 Percent Complete: Total/live time:      13568.43     13568.43
  50 Percent Complete: Total/live time:      18496.45     18496.45
  60 Percent Complete: Total/live time:      20303.44     20303.44
  70 Percent Complete: Total/live time:      25297.17     25297.17
  80 Percent Complete: Total/live time:      27024.17     27024.17
  90 Percent Complete: Total/live time:      30954.79     30954.79
 100 Percent Complete: Total/live time:      32946.00     32946.00
 
 Number of attitude steps  used:           54
 Number of attitude steps avail:        31101
 Mean RA/DEC pixel offset:       -0.0582      -2.6244
 
    writing expo file: ad78011000g300270.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g300270m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g300270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079     46917            162         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47079     46917            162         0         0         0
   in  32946.     seconds
 Image            has    46917 counts for  1.424     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079     31130            162         0         0     15787
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47079     31130            162         0         0     15787
   in  32946.     seconds
 Image            has    31130 counts for 0.9449     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079     15938            162         0         0     30979
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47079     15938            162         0         0     30979
   in  32946.     seconds
 Image            has    15938 counts for 0.4838     counts/sec
 Command not found; type ? for a command listing
!ad78011000g300270m:ASCA >
!ad78011000g300270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g300270m:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300270m:ASCA > read events ad78011000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300270m:ASCA-GIS3-PH > set image sky
!ad78011000g300270m:ASCA-GIS3-PH > filter region corner_point.reg
!ad78011000g300270m:ASCA-GIS3-PH > extract image
!ad78011000g300270m:ASCA-GIS3-PH > save image outfile=ad78011000g300270_all.img
Wrote image to file ad78011000g300270_all.img
!ad78011000g300270m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad78011000g300270m:ASCA-GIS3-PH > extract image
!ad78011000g300270m:ASCA-GIS3-PH > save image outfile=ad78011000g300270_lo.img
Wrote image to file ad78011000g300270_lo.img
!ad78011000g300270m:ASCA-GIS3-PH > clear pha_cut
!ad78011000g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g300270m:ASCA-GIS3-PH > extract image
!ad78011000g300270m:ASCA-GIS3-PH > save image outfile=ad78011000g300270_hi.img
Wrote image to file ad78011000g300270_hi.img
!ad78011000g300270m:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad78011000g300370.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g300370l.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g300370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0259
 Mean   RA/DEC/ROLL :      340.6938      29.7815     292.0259
 Pnt    RA/DEC/ROLL :      340.7068      29.7834     292.0259
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :             9
 Total GTI (secs)   :       357.463
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         55.87        55.87
  20 Percent Complete: Total/live time:        111.57       111.57
  30 Percent Complete: Total/live time:        111.57       111.57
  40 Percent Complete: Total/live time:        254.88       254.88
  50 Percent Complete: Total/live time:        254.88       254.88
  60 Percent Complete: Total/live time:        278.51       278.51
  70 Percent Complete: Total/live time:        278.51       278.51
  80 Percent Complete: Total/live time:        334.12       334.12
  90 Percent Complete: Total/live time:        334.12       334.12
 100 Percent Complete: Total/live time:        357.46       357.46
 
 Number of attitude steps  used:           13
 Number of attitude steps avail:         7259
 Mean RA/DEC pixel offset:       -0.0659      -2.5202
 
    writing expo file: ad78011000g300370.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g300370l.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g300370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559       556              3         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           559       556              3         0         0         0
   in  357.46     seconds
 Image            has      556 counts for  1.555     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559       370              3         0         0       186
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           559       370              3         0         0       186
   in  357.46     seconds
 Image            has      370 counts for  1.035     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559       187              3         0         0       369
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           559       187              3         0         0       369
   in  357.46     seconds
 Image            has      187 counts for 0.5231     counts/sec
 Command not found; type ? for a command listing
!ad78011000g300370l:ASCA >
!ad78011000g300370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g300370l:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300370l:ASCA > read events ad78011000g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300370l:ASCA-GIS3-PH > set image sky
!ad78011000g300370l:ASCA-GIS3-PH > filter region corner_point.reg
!ad78011000g300370l:ASCA-GIS3-PH > extract image
!ad78011000g300370l:ASCA-GIS3-PH > save image outfile=ad78011000g300370_all.img
Wrote image to file ad78011000g300370_all.img
!ad78011000g300370l:ASCA-GIS3-PH > filter pha_cut 0 170
!ad78011000g300370l:ASCA-GIS3-PH > extract image
!ad78011000g300370l:ASCA-GIS3-PH > save image outfile=ad78011000g300370_lo.img
Wrote image to file ad78011000g300370_lo.img
!ad78011000g300370l:ASCA-GIS3-PH > clear pha_cut
!ad78011000g300370l:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g300370l:ASCA-GIS3-PH > extract image
!ad78011000g300370l:ASCA-GIS3-PH > save image outfile=ad78011000g300370_hi.img
Wrote image to file ad78011000g300370_hi.img
!ad78011000g300370l:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad78011000g300470.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad78011000g300470m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000g300470m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0259
 Mean   RA/DEC/ROLL :      340.6942      29.7797     292.0259
 Pnt    RA/DEC/ROLL :      340.7061      29.7839     292.0259
 
 Image rebin factor :             1
 Attitude Records   :        249279
 GTI intervals      :             9
 Total GTI (secs)   :       208.000
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         48.00        48.00
  20 Percent Complete: Total/live time:         48.00        48.00
  30 Percent Complete: Total/live time:         67.00        67.00
  40 Percent Complete: Total/live time:         91.00        91.00
  50 Percent Complete: Total/live time:        112.00       112.00
  60 Percent Complete: Total/live time:        144.00       144.00
  70 Percent Complete: Total/live time:        155.00       155.00
  80 Percent Complete: Total/live time:        176.00       176.00
  90 Percent Complete: Total/live time:        208.00       208.00
 100 Percent Complete: Total/live time:        208.00       208.00
 
 Number of attitude steps  used:           15
 Number of attitude steps avail:         4215
 Mean RA/DEC pixel offset:       -0.0302      -2.3815
 
    writing expo file: ad78011000g300470.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000g300470m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000g300470m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      243     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243       242              1         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           243       242              1         0         0         0
   in  208.00     seconds
 Image            has      242 counts for  1.163     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243       169              1         0         0        73
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           243       169              1         0         0        73
   in  208.00     seconds
 Image            has      169 counts for 0.8125     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243        74              1         0         0       168
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           243        74              1         0         0       168
   in  208.00     seconds
 Image            has       74 counts for 0.3558     counts/sec
 Command not found; type ? for a command listing
!ad78011000g300470m:ASCA >
!ad78011000g300470m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000g300470m:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300470m:ASCA > read events ad78011000g300470m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000g300470m:ASCA-GIS3-PH > set image sky
!ad78011000g300470m:ASCA-GIS3-PH > filter region corner_point.reg
!ad78011000g300470m:ASCA-GIS3-PH > extract image
!ad78011000g300470m:ASCA-GIS3-PH > save image outfile=ad78011000g300470_all.img
Wrote image to file ad78011000g300470_all.img
!ad78011000g300470m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad78011000g300470m:ASCA-GIS3-PH > extract image
!ad78011000g300470m:ASCA-GIS3-PH > save image outfile=ad78011000g300470_lo.img
Wrote image to file ad78011000g300470_lo.img
!ad78011000g300470m:ASCA-GIS3-PH > clear pha_cut
!ad78011000g300470m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad78011000g300470m:ASCA-GIS3-PH > extract image
!ad78011000g300470m:ASCA-GIS3-PH > save image outfile=ad78011000g300470_hi.img
Wrote image to file ad78011000g300470_hi.img
!ad78011000g300470m:ASCA-GIS3-PH > exit save_session=no

-> Generating exposure map ad78011000s000102.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad78011000s000102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000s000102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0182
 Mean   RA/DEC/ROLL :      340.6813      29.7640     292.0182
 Pnt    RA/DEC/ROLL :      340.6500      29.5828     292.0182
 
 Image rebin factor :             4
 Attitude Records   :        249279
 Hot Pixels         :            18
 GTI intervals      :           121
 Total GTI (secs)   :     61910.195
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       6995.61      6995.61
  20 Percent Complete: Total/live time:      13790.11     13790.11
  30 Percent Complete: Total/live time:      20767.86     20767.86
  40 Percent Complete: Total/live time:      25663.81     25663.81
  50 Percent Complete: Total/live time:      32272.27     32272.27
  60 Percent Complete: Total/live time:      37992.89     37992.89
  70 Percent Complete: Total/live time:      44353.42     44353.42
  80 Percent Complete: Total/live time:      50987.89     50987.89
  90 Percent Complete: Total/live time:      56612.40     56612.40
 100 Percent Complete: Total/live time:      61910.20     61910.20
 
 Number of attitude steps  used:          182
 Number of attitude steps avail:       177788
 Mean RA/DEC pixel offset:      -56.3996    -101.3817
 
    writing expo file: ad78011000s000102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000s000102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000s000102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.62E+05   152413 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152413    152413              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        152413    152413              0         0         0         0
   in  61910.     seconds
 Image            has   152413 counts for  2.462     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152413    126618              0         0         0     25795
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        152413    126618              0         0         0     25795
   in  61910.     seconds
 Image            has   126618 counts for  2.045     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152413     25886              0         0         0    126527
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        152413     25886              0         0         0    126527
   in  61910.     seconds
 Image            has    25886 counts for 0.4181     counts/sec
 Command not found; type ? for a command listing
!ad78011000s000102h:ASCA >
!ad78011000s000102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000s000102h:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s000102h:ASCA > read events ad78011000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad78011000s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad78011000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad78011000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad78011000s000102_all.img
Wrote image to file ad78011000s000102_all.img
!ad78011000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad78011000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad78011000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad78011000s000102_lo.img
Wrote image to file ad78011000s000102_lo.img
!ad78011000s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad78011000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad78011000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad78011000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad78011000s000102_hi.img
Wrote image to file ad78011000s000102_hi.img
!ad78011000s000102h:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad78011000s000202.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad78011000s000202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000s000202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0199
 Mean   RA/DEC/ROLL :      340.6818      29.7637     292.0199
 Pnt    RA/DEC/ROLL :      340.7167      29.8019     292.0199
 
 Image rebin factor :             4
 Attitude Records   :        249279
 Hot Pixels         :            13
 GTI intervals      :            95
 Total GTI (secs)   :     25761.240
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       2991.99      2991.99
  20 Percent Complete: Total/live time:       8390.87      8390.87
  30 Percent Complete: Total/live time:       8390.87      8390.87
  40 Percent Complete: Total/live time:      11375.99     11375.99
  50 Percent Complete: Total/live time:      13394.66     13394.66
  60 Percent Complete: Total/live time:      18542.62     18542.62
  70 Percent Complete: Total/live time:      18542.62     18542.62
  80 Percent Complete: Total/live time:      21872.00     21872.00
  90 Percent Complete: Total/live time:      23521.41     23521.41
 100 Percent Complete: Total/live time:      25761.24     25761.24
 
 Number of attitude steps  used:           76
 Number of attitude steps avail:        28854
 Mean RA/DEC pixel offset:      -53.7179     -98.2862
 
    writing expo file: ad78011000s000202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000s000202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.26E+05    55963 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          55963     55963              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         55963     55963              0         0         0         0
   in  25761.     seconds
 Image            has    55963 counts for  2.172     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          55963     45984              0         0         0      9979
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         55963     45984              0         0         0      9979
   in  25761.     seconds
 Image            has    45984 counts for  1.785     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          55963     10010              0         0         0     45953
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         55963     10010              0         0         0     45953
   in  25761.     seconds
 Image            has    10010 counts for 0.3886     counts/sec
 Command not found; type ? for a command listing
!ad78011000s000202m:ASCA >
!ad78011000s000202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000s000202m:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s000202m:ASCA > read events ad78011000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s000202m:ASCA-SIS0-BRIGHT > set image sky
!ad78011000s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad78011000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad78011000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad78011000s000202_all.img
Wrote image to file ad78011000s000202_all.img
!ad78011000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad78011000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad78011000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad78011000s000202_lo.img
Wrote image to file ad78011000s000202_lo.img
!ad78011000s000202m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad78011000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad78011000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad78011000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad78011000s000202_hi.img
Wrote image to file ad78011000s000202_hi.img
!ad78011000s000202m:ASCA-SIS0-BRIGHT > exit save_session=no

-> Generating exposure map ad78011000s100102.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad78011000s100102h.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000s100102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0269
 Mean   RA/DEC/ROLL :      340.6989      29.7698     292.0269
 Pnt    RA/DEC/ROLL :      340.6326      29.5778     292.0269
 
 Image rebin factor :             4
 Attitude Records   :        249279
 Hot Pixels         :            16
 GTI intervals      :           122
 Total GTI (secs)   :     62050.449
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       7035.61      7035.61
  20 Percent Complete: Total/live time:      13766.11     13766.11
  30 Percent Complete: Total/live time:      20675.86     20675.86
  40 Percent Complete: Total/live time:      25580.69     25580.69
  50 Percent Complete: Total/live time:      32193.15     32193.15
  60 Percent Complete: Total/live time:      38025.15     38025.15
  70 Percent Complete: Total/live time:      44425.68     44425.68
  80 Percent Complete: Total/live time:      51068.15     51068.15
  90 Percent Complete: Total/live time:      56684.66     56684.66
 100 Percent Complete: Total/live time:      62050.46     62050.46
 
 Number of attitude steps  used:          182
 Number of attitude steps avail:       177760
 Mean RA/DEC pixel offset:      -60.8275     -29.9435
 
    writing expo file: ad78011000s100102.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000s100102h.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000s100102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.62E+05   119606 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119606    119606              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119606    119606              0         0         0         0
   in  62050.     seconds
 Image            has   119606 counts for  1.928     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119606     99611              0         0         0     19995
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119606     99611              0         0         0     19995
   in  62050.     seconds
 Image            has    99611 counts for  1.605     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119606     20071              0         0         0     99535
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119606     20071              0         0         0     99535
   in  62050.     seconds
 Image            has    20071 counts for 0.3235     counts/sec
 Command not found; type ? for a command listing
!ad78011000s100102h:ASCA >
!ad78011000s100102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000s100102h:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s100102h:ASCA > read events ad78011000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad78011000s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad78011000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad78011000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad78011000s100102_all.img
Wrote image to file ad78011000s100102_all.img
!ad78011000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad78011000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad78011000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad78011000s100102_lo.img
Wrote image to file ad78011000s100102_lo.img
!ad78011000s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad78011000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad78011000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad78011000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad78011000s100102_hi.img
Wrote image to file ad78011000s100102_hi.img
!ad78011000s100102h:ASCA-SIS1-BRIGHT > exit save_session=no

-> Generating exposure map ad78011000s100202.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad78011000s100202m.evt
-> Standard Output From FTOOL ascaexpo:

ASCAEXPO_V0.9b
 
    reading data file: ad78011000s100202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa000601_1151.1200
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      340.6998      29.7837     292.0285
 Mean   RA/DEC/ROLL :      340.6992      29.7685     292.0285
 Pnt    RA/DEC/ROLL :      340.6993      29.7969     292.0285
 
 Image rebin factor :             4
 Attitude Records   :        249279
 Hot Pixels         :            14
 GTI intervals      :           122
 Total GTI (secs)   :     24352.344
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       2974.91      2974.91
  20 Percent Complete: Total/live time:       7166.65      7166.65
  30 Percent Complete: Total/live time:       7727.52      7727.52
  40 Percent Complete: Total/live time:      10031.52     10031.52
  50 Percent Complete: Total/live time:      13073.76     13073.76
  60 Percent Complete: Total/live time:      17901.73     17901.73
  70 Percent Complete: Total/live time:      17901.73     17901.73
  80 Percent Complete: Total/live time:      20943.11     20943.11
  90 Percent Complete: Total/live time:      22560.51     22560.51
 100 Percent Complete: Total/live time:      24352.35     24352.35
 
 Number of attitude steps  used:           76
 Number of attitude steps avail:        28678
 Mean RA/DEC pixel offset:      -58.5915     -27.3760
 
    writing expo file: ad78011000s100202.expo
    closing attitude file...
    closing data file...

-> Generating low and high energy images for ad78011000s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad78011000s100202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.24E+05    41624 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41624     41624              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         41624     41624              0         0         0         0
   in  24352.     seconds
 Image            has    41624 counts for  1.709     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41624     34400              0         0         0      7224
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         41624     34400              0         0         0      7224
   in  24352.     seconds
 Image            has    34400 counts for  1.413     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41624      7261              0         0         0     34363
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         41624      7261              0         0         0     34363
   in  24352.     seconds
 Image            has     7261 counts for 0.2982     counts/sec
 Command not found; type ? for a command listing
!ad78011000s100202m:ASCA >
!ad78011000s100202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad78011000s100202m:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s100202m:ASCA > read events ad78011000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!ad78011000s100202m:ASCA-SIS1-BRIGHT > set image sky
!ad78011000s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad78011000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad78011000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad78011000s100202_all.img
Wrote image to file ad78011000s100202_all.img
!ad78011000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad78011000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad78011000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad78011000s100202_lo.img
Wrote image to file ad78011000s100202_lo.img
!ad78011000s100202m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad78011000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad78011000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad78011000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad78011000s100202_hi.img
Wrote image to file ad78011000s100202_hi.img
!ad78011000s100202m:ASCA-SIS1-BRIGHT > exit save_session=no

-> Summing sis images
-> Exposure for ad78011000s000102.expo is 61910.195312 seconds
-> Exposure for ad78011000s000202.expo is 25761.240234 seconds
-> Exposure for ad78011000s100102.expo is 62050.453125 seconds
-> Exposure for ad78011000s100202.expo is 24352.343750 seconds
-> Summing the following images to produce ad78011000sis32002.totexpo

ad78011000s000102.expo
ad78011000s000202.expo
ad78011000s100102.expo
ad78011000s100202.expo

-> Setting EXPOSURE=174074.232421 in ad78011000sis32002.totexpo
-> Exposure for ad78011000s000102_all.img is 6.191019612389803E+04 seconds
-> ad78011000s000102_all.img has 152413 counts
-> Exposure for ad78011000s000202_all.img is 2.576123735189438E+04 seconds
-> ad78011000s000202_all.img has 55963 counts
-> Exposure for ad78011000s100102_all.img is 6.205045085835457E+04 seconds
-> ad78011000s100102_all.img has 119606 counts
-> Exposure for ad78011000s100202_all.img is 2.435234128251672E+04 seconds
-> ad78011000s100202_all.img has 41624 counts
-> Summing the following images to produce ad78011000sis32002_all.totsky

ad78011000s000102_all.img
ad78011000s000202_all.img
ad78011000s100102_all.img
ad78011000s100202_all.img

-> Setting EXPOSURE=174074.225616664 in ad78011000sis32002_all.totsky
-> Setting TOTCTS=369606 in ad78011000sis32002_all.totsky
-> Exposure for ad78011000s000102_lo.img is 6.191019612389803E+04 seconds
-> ad78011000s000102_lo.img has 126618 counts
-> Exposure for ad78011000s000202_lo.img is 2.576123735189438E+04 seconds
-> ad78011000s000202_lo.img has 45984 counts
-> Exposure for ad78011000s100102_lo.img is 6.205045085835457E+04 seconds
-> ad78011000s100102_lo.img has 99611 counts
-> Exposure for ad78011000s100202_lo.img is 2.435234128251672E+04 seconds
-> ad78011000s100202_lo.img has 34400 counts
-> Summing the following images to produce ad78011000sis32002_lo.totsky

ad78011000s000102_lo.img
ad78011000s000202_lo.img
ad78011000s100102_lo.img
ad78011000s100202_lo.img

-> Setting EXPOSURE=174074.225616664 in ad78011000sis32002_lo.totsky
-> Setting TOTCTS=306613 in ad78011000sis32002_lo.totsky
-> Exposure for ad78011000s000102_hi.img is 6.191019612389803E+04 seconds
-> ad78011000s000102_hi.img has 25886 counts
-> Exposure for ad78011000s000202_hi.img is 2.576123735189438E+04 seconds
-> ad78011000s000202_hi.img has 10010 counts
-> Exposure for ad78011000s100102_hi.img is 6.205045085835457E+04 seconds
-> ad78011000s100102_hi.img has 20071 counts
-> Exposure for ad78011000s100202_hi.img is 2.435234128251672E+04 seconds
-> ad78011000s100202_hi.img has 7261 counts
-> Summing the following images to produce ad78011000sis32002_hi.totsky

ad78011000s000102_hi.img
ad78011000s000202_hi.img
ad78011000s100102_hi.img
ad78011000s100202_hi.img

-> Setting EXPOSURE=174074.225616664 in ad78011000sis32002_hi.totsky
-> Setting TOTCTS=63228 in ad78011000sis32002_hi.totsky
-> Running XIMAGE to create ad78011000sis32002.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad78011000sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 2000.0000
 Saving current map
![2]XIMAGE> read/expo ad78011000sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 2901.2375
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     1.00000
  Min and max :   0  1367
 Max-preserving scaling factor :     1.4630578
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     2036.90
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

-> Summing gis images
-> Exposure for ad78011000g200170.expo is 66056.851562 seconds
-> Exposure for ad78011000g200270.expo is 32913.992188 seconds
-> Exposure for ad78011000g200370.expo is 357.462585 seconds
-> Exposure for ad78011000g200470.expo is 207.999802 seconds
-> Exposure for ad78011000g300170.expo is 66044.851562 seconds
-> Exposure for ad78011000g300270.expo is 32945.992188 seconds
-> Exposure for ad78011000g300370.expo is 357.462585 seconds
-> Exposure for ad78011000g300470.expo is 207.999802 seconds
-> Summing the following images to produce ad78011000gis25670.totexpo

ad78011000g200170.expo
ad78011000g200270.expo
ad78011000g200370.expo
ad78011000g200470.expo
ad78011000g300170.expo
ad78011000g300270.expo
ad78011000g300370.expo
ad78011000g300470.expo

-> Setting EXPOSURE=199092.612274 in ad78011000gis25670.totexpo
-> Exposure for ad78011000g200170_all.img is 6.605684959954023E+04 seconds
-> ad78011000g200170_all.img has 92861 counts
-> Exposure for ad78011000g200270_all.img is 3.291399069094658E+04 seconds
-> ad78011000g200270_all.img has 42881 counts
-> Exposure for ad78011000g200370_all.img is 3.574626051187515E+02 seconds
-> ad78011000g200370_all.img has 519 counts
-> Exposure for ad78011000g200470_all.img is 2.079997946918011E+02 seconds
-> ad78011000g200470_all.img has 243 counts
-> Exposure for ad78011000g300170_all.img is 6.604484962484241E+04 seconds
-> ad78011000g300170_all.img has 101870 counts
-> Exposure for ad78011000g300270_all.img is 3.294599064213037E+04 seconds
-> ad78011000g300270_all.img has 46917 counts
-> Exposure for ad78011000g300370_all.img is 3.574626051187515E+02 seconds
-> ad78011000g300370_all.img has 556 counts
-> Exposure for ad78011000g300470_all.img is 2.079997946918011E+02 seconds
-> ad78011000g300470_all.img has 242 counts
-> Summing the following images to produce ad78011000gis25670_all.totsky

ad78011000g200170_all.img
ad78011000g200270_all.img
ad78011000g200370_all.img
ad78011000g200470_all.img
ad78011000g300170_all.img
ad78011000g300270_all.img
ad78011000g300370_all.img
ad78011000g300470_all.img

-> Setting EXPOSURE=199092.605357081 in ad78011000gis25670_all.totsky
-> Setting TOTCTS=286089 in ad78011000gis25670_all.totsky
-> Exposure for ad78011000g200170_lo.img is 6.605684959954023E+04 seconds
-> ad78011000g200170_lo.img has 62555 counts
-> Exposure for ad78011000g200270_lo.img is 3.291399069094658E+04 seconds
-> ad78011000g200270_lo.img has 28318 counts
-> Exposure for ad78011000g200370_lo.img is 3.574626051187515E+02 seconds
-> ad78011000g200370_lo.img has 342 counts
-> Exposure for ad78011000g200470_lo.img is 2.079997946918011E+02 seconds
-> ad78011000g200470_lo.img has 150 counts
-> Exposure for ad78011000g300170_lo.img is 6.604484962484241E+04 seconds
-> ad78011000g300170_lo.img has 68471 counts
-> Exposure for ad78011000g300270_lo.img is 3.294599064213037E+04 seconds
-> ad78011000g300270_lo.img has 31130 counts
-> Exposure for ad78011000g300370_lo.img is 3.574626051187515E+02 seconds
-> ad78011000g300370_lo.img has 370 counts
-> Exposure for ad78011000g300470_lo.img is 2.079997946918011E+02 seconds
-> ad78011000g300470_lo.img has 169 counts
-> Summing the following images to produce ad78011000gis25670_lo.totsky

ad78011000g200170_lo.img
ad78011000g200270_lo.img
ad78011000g200370_lo.img
ad78011000g200470_lo.img
ad78011000g300170_lo.img
ad78011000g300270_lo.img
ad78011000g300370_lo.img
ad78011000g300470_lo.img

-> Setting EXPOSURE=199092.605357081 in ad78011000gis25670_lo.totsky
-> Setting TOTCTS=191505 in ad78011000gis25670_lo.totsky
-> Exposure for ad78011000g200170_hi.img is 6.605684959954023E+04 seconds
-> ad78011000g200170_hi.img has 30630 counts
-> Exposure for ad78011000g200270_hi.img is 3.291399069094658E+04 seconds
-> ad78011000g200270_hi.img has 14725 counts
-> Exposure for ad78011000g200370_hi.img is 3.574626051187515E+02 seconds
-> ad78011000g200370_hi.img has 178 counts
-> Exposure for ad78011000g200470_hi.img is 2.079997946918011E+02 seconds
-> ad78011000g200470_hi.img has 95 counts
-> Exposure for ad78011000g300170_hi.img is 6.604484962484241E+04 seconds
-> ad78011000g300170_hi.img has 33767 counts
-> Exposure for ad78011000g300270_hi.img is 3.294599064213037E+04 seconds
-> ad78011000g300270_hi.img has 15938 counts
-> Exposure for ad78011000g300370_hi.img is 3.574626051187515E+02 seconds
-> ad78011000g300370_hi.img has 187 counts
-> Exposure for ad78011000g300470_hi.img is 2.079997946918011E+02 seconds
-> ad78011000g300470_hi.img has 74 counts
-> Summing the following images to produce ad78011000gis25670_hi.totsky

ad78011000g200170_hi.img
ad78011000g200270_hi.img
ad78011000g200370_hi.img
ad78011000g200470_hi.img
ad78011000g300170_hi.img
ad78011000g300270_hi.img
ad78011000g300370_hi.img
ad78011000g300470_hi.img

-> Setting EXPOSURE=199092.605357081 in ad78011000gis25670_hi.totsky
-> Setting TOTCTS=95594 in ad78011000gis25670_hi.totsky
-> Running XIMAGE to create ad78011000gis25670.gif
-> Standard Output From STOOL ximage:

 No of detectors read in:   21
![1]XIMAGE> read/fits ad78011000gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 1838.0000
 Saving current map
![2]XIMAGE> read/expo ad78011000gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 3318.2109
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :     1.00000
  Min and max :   0  1326
 Max-preserving scaling factor :     1.3861237
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     809182.
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (15:42:40)

-> Smoothing ad78011000gis25670_all.totsky with ad78011000gis25670.totexpo
-> Clipping exposures below 29863.8918411 seconds
-> Detecting sources in ad78011000gis25670_all.smooth
-> Standard Output From STOOL ascasource:

137 114 0.00693591 50 7 614.869
202 113 5.69249e-05 14 9 5.72551

-> Smoothing ad78011000gis25670_hi.totsky with ad78011000gis25670.totexpo
-> Clipping exposures below 29863.8918411 seconds
-> Detecting sources in ad78011000gis25670_hi.smooth
-> Standard Output From STOOL ascasource:

137 114 0.00239587 109 6 426.93

-> Smoothing ad78011000gis25670_lo.totsky with ad78011000gis25670.totexpo
-> Clipping exposures below 29863.8918411 seconds
-> Detecting sources in ad78011000gis25670_lo.smooth
-> Standard Output From STOOL ascasource:

137 114 0.00457129 49 8 822.967
202 113 3.96242e-05 12 13 8.78119

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

137 114 24 F
202 113 14 F

-> Sources with radius >= 2

137 114 24 F
202 113 14 F

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad78011000gis25670.src
-> Smoothing ad78011000sis32002_all.totsky with ad78011000sis32002.totexpo
-> Clipping exposures below 26111.13486315 seconds
-> Detecting sources in ad78011000sis32002_all.smooth
-> Standard Output From STOOL ascasource:

178 127 0.00865978 105 7 2173.64

-> Smoothing ad78011000sis32002_hi.totsky with ad78011000sis32002.totexpo
-> Clipping exposures below 26111.13486315 seconds
-> Detecting sources in ad78011000sis32002_hi.smooth
-> Standard Output From STOOL ascasource:

178 127 0.00144191 105 7 943.218

-> Smoothing ad78011000sis32002_lo.totsky with ad78011000sis32002.totexpo
-> Clipping exposures below 26111.13486315 seconds
-> Detecting sources in ad78011000sis32002_lo.smooth
-> Standard Output From STOOL ascasource:

178 127 0.00722297 105 7 2958.78

-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:

178 127 38 F

-> Sources with radius >= 2

178 127 38 F

-> Standard Output From STOOL colorpic:

color plane 0
color plane 1
color plane 2
writing image
image written

-> Creating fits catalog of sources: ad78011000sis32002.src
-> Generating region files
-> Converting (712.0,508.0,2.0) to s0 detector coordinates
-> Using events in: ad78011000s000102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   324250.00
 The mean of the selected column is                  515.50079
 The standard deviation of the selected column is    4.7062179
 The minimum of selected column is                   497.00000
 The maximum of selected column is                   531.00000
 The number of points used in calculation is              629

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   298257.00
 The mean of the selected column is                  474.17647
 The standard deviation of the selected column is    2.3840673
 The minimum of selected column is                   463.00000
 The maximum of selected column is                   490.00000
 The number of points used in calculation is              629

-> Converting (712.0,508.0,2.0) to s1 detector coordinates
-> Using events in: ad78011000s100102h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   237631.00
 The mean of the selected column is                  513.24190
 The standard deviation of the selected column is    4.9737204
 The minimum of selected column is                   494.00000
 The maximum of selected column is                   523.00000
 The number of points used in calculation is              463

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   236090.00
 The mean of the selected column is                  509.91361
 The standard deviation of the selected column is    2.5855678
 The minimum of selected column is                   496.00000
 The maximum of selected column is                   522.00000
 The number of points used in calculation is              463

-> Converting (137.0,114.0,2.0) to g2 detector coordinates
-> Using events in: ad78011000g200170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   653847.00
 The mean of the selected column is                  112.17138
 The standard deviation of the selected column is    1.1873119
 The minimum of selected column is                   108.00000
 The maximum of selected column is                   115.00000
 The number of points used in calculation is             5829

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   664054.00
 The mean of the selected column is                  113.92246
 The standard deviation of the selected column is    1.0985226
 The minimum of selected column is                   110.00000
 The maximum of selected column is                   117.00000
 The number of points used in calculation is             5829

-> Converting (202.0,113.0,2.0) to g2 detector coordinates
-> Using events in: ad78011000g200170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   7449.0000
 The mean of the selected column is                  135.43636
 The standard deviation of the selected column is    1.2135598
 The minimum of selected column is                   133.00000
 The maximum of selected column is                   138.00000
 The number of points used in calculation is               55

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   2910.0000
 The mean of the selected column is                  52.909091
 The standard deviation of the selected column is    1.0412373
 The minimum of selected column is                   51.000000
 The maximum of selected column is                   55.000000
 The number of points used in calculation is               55

-> Converting (137.0,114.0,2.0) to g3 detector coordinates
-> Using events in: ad78011000g300170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   882376.00
 The mean of the selected column is                  117.96471
 The standard deviation of the selected column is    1.1722081
 The minimum of selected column is                   114.00000
 The maximum of selected column is                   122.00000
 The number of points used in calculation is             7480

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   856624.00
 The mean of the selected column is                  114.52193
 The standard deviation of the selected column is    1.0788169
 The minimum of selected column is                   111.00000
 The maximum of selected column is                   117.00000
 The number of points used in calculation is             7480

-> Converting (202.0,113.0,2.0) to g3 detector coordinates
-> Using events in: ad78011000g300170h.evt
-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   5953.0000
 The mean of the selected column is                  141.73810
 The standard deviation of the selected column is    1.1274734
 The minimum of selected column is                   139.00000
 The maximum of selected column is                   144.00000
 The number of points used in calculation is               42

-> Standard Output From FTOOL fstatistic:

 The sum of the selected column is                   2268.0000
 The mean of the selected column is                  54.000000
 The standard deviation of the selected column is   0.93704257
 The minimum of selected column is                   52.000000
 The maximum of selected column is                   55.000000
 The number of points used in calculation is               42

Extracting spectra and generating response matrices (15:48:13)

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:

1 ad78011000s000102h.evt 208376
1 ad78011000s000202m.evt 208376

-> Fetching SIS0_NOTCHIP0.1
-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Fetching SIS0_OFFCHIP.2
-> Extracting ad78011000s010102_1.pi from ad78011000s032002_1.reg and:

ad78011000s000102h.evt
ad78011000s000202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.62E+05   152413 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.62E+05   152413 0100
      2 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.26E+05    55963 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152413    143055           9358         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          55963     52448           3515         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        208376    195503          12873         0         0         0
   in  87671.     seconds
 Spectrum         has   195503 counts for  2.230     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 87671.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.23830E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s010102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad78011000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad78011000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad78011000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad78011000s010102_1.pi group=yes
Wrote spectrum to ad78011000s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad78011000s010102_1.pi
-> Grouping ad78011000s010102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 87671.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.23830E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      18  are grouped by a factor        2
 ...        19 -     188  are single channels
 ...       189 -     190  are grouped by a factor        2
 ...       191 -     192  are single channels
 ...       193 -     194  are grouped by a factor        2
 ...       195 -     197  are single channels
 ...       198 -     207  are grouped by a factor        2
 ...       208 -     209  are single channels
 ...       210 -     227  are grouped by a factor        2
 ...       228 -     245  are grouped by a factor        3
 ...       246 -     255  are grouped by a factor        5
 ...       256 -     262  are grouped by a factor        7
 ...       263 -     268  are grouped by a factor        6
 ...       269 -     276  are grouped by a factor        8
 ...       277 -     285  are grouped by a factor        9
 ...       286 -     295  are grouped by a factor       10
 ...       296 -     313  are grouped by a factor       18
 ...       314 -     341  are grouped by a factor       28
 ...       342 -     387  are grouped by a factor       46
 ...       388 -     476  are grouped by a factor       89
 ...       477 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s010102_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 1
-> Fetching sis0c1p40_290296.fits
-> Generating ad78011000s010102_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad78011000s010102_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   35 by   38 bins
               expanded to   35 by   38 bins
 First WMAP bin is at detector pixel  368  320
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   48.838     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  511.00  475.00 (detector coordinates)
 Point source at   18.97   10.50 (WMAP bins wrt optical axis)
 Point source at    4.60   28.98 (... in polar coordinates)
 
 Total counts in region = 1.95449E+05
 Weighted mean angle from optical axis  =  4.591 arcmin

-> Standard Output From STOOL group_event_files:

1 ad78011000s000112h.evt 209156
1 ad78011000s000212m.evt 209156

-> SIS0_NOTCHIP0.1 already present in current directory
-> SIS0_NOTCHIP2.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> SIS0_OFFCHIP.2 already present in current directory
-> Extracting ad78011000s010212_1.pi from ad78011000s032002_1.reg and:

ad78011000s000112h.evt
ad78011000s000212m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:27    0.62E+05   152966 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:27    0.62E+05   152966 0100
      2 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.26E+05    56190 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152966    143466           9500         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          56190     52611           3579         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        209156    196077          13079         0         0         0
   in  87671.     seconds
 Spectrum         has   196077 counts for  2.236     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 87671.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.23830E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s010212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT2 > read events ad78011000s000212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad78011000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad78011000s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad78011000s010212_1.pi group=yes
Wrote spectrum to ad78011000s010212_1.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Deleting BLANK keyword from ad78011000s010212_1.pi
-> Grouping ad78011000s010212_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 87671.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.23830E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      31  of undefined grouping (Channel quality=bad)
 ...        32 -      36  are grouped by a factor        5
 ...        37 -     328  are single channels
 ...       329 -     330  are grouped by a factor        2
 ...       331 -     335  are single channels
 ...       336 -     339  are grouped by a factor        2
 ...       340 -     340  are single channels
 ...       341 -     348  are grouped by a factor        2
 ...       349 -     350  are single channels
 ...       351 -     354  are grouped by a factor        2
 ...       355 -     355  are single channels
 ...       356 -     369  are grouped by a factor        2
 ...       370 -     370  are single channels
 ...       371 -     392  are grouped by a factor        2
 ...       393 -     395  are grouped by a factor        3
 ...       396 -     401  are grouped by a factor        2
 ...       402 -     428  are grouped by a factor        3
 ...       429 -     432  are grouped by a factor        4
 ...       433 -     438  are grouped by a factor        3
 ...       439 -     446  are grouped by a factor        4
 ...       447 -     449  are grouped by a factor        3
 ...       450 -     453  are grouped by a factor        4
 ...       454 -     463  are grouped by a factor        5
 ...       464 -     481  are grouped by a factor        6
 ...       482 -     485  are grouped by a factor        4
 ...       486 -     492  are grouped by a factor        7
 ...       493 -     501  are grouped by a factor        9
 ...       502 -     509  are grouped by a factor        8
 ...       510 -     518  are grouped by a factor        9
 ...       519 -     531  are grouped by a factor       13
 ...       532 -     541  are grouped by a factor       10
 ...       542 -     567  are grouped by a factor       13
 ...       568 -     584  are grouped by a factor       17
 ...       585 -     610  are grouped by a factor       26
 ...       611 -     640  are grouped by a factor       30
 ...       641 -     688  are grouped by a factor       48
 ...       689 -     749  are grouped by a factor       61
 ...       750 -     824  are grouped by a factor       75
 ...       825 -     939  are grouped by a factor      115
 ...       940 -    1023  are grouped by a factor       84
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s010212_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 1
-> sis0c1p40_290296.fits already present in current directory
-> Generating ad78011000s010212_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C1 Bright2 PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad78011000s010212_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   35 by   38 bins
               expanded to   35 by   38 bins
 First WMAP bin is at detector pixel  368  320
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   48.838     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  511.00  475.00 (detector coordinates)
 Point source at   18.97   10.50 (WMAP bins wrt optical axis)
 Point source at    4.60   28.98 (... in polar coordinates)
 
 Total counts in region = 1.96021E+05
 Weighted mean angle from optical axis  =  4.592 arcmin

-> Standard Output From STOOL group_event_files:

1 ad78011000s100102h.evt 161230
1 ad78011000s100202m.evt 161230

-> Fetching SIS1_NOTCHIP0.1
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_NOTCHIP2.1
-> Fetching SIS1_OFFCHIP.2
-> Extracting ad78011000s110102_1.pi from ad78011000s132002_1.reg and:

ad78011000s100102h.evt
ad78011000s100202m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.62E+05   119606 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.62E+05   119606 0001
      2 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.24E+05    41624 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119606    112059           7547         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41624     38992           2632         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        161230    151051          10179         0         0         0
   in  86403.     seconds
 Spectrum         has   151051 counts for  1.748     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 86403.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.97360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s110102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad78011000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad78011000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad78011000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad78011000s110102_1.pi group=yes
Wrote spectrum to ad78011000s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Deleting BLANK keyword from ad78011000s110102_1.pi
-> Grouping ad78011000s110102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 86403.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.97360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -     181  are single channels
 ...       182 -     185  are grouped by a factor        2
 ...       186 -     190  are single channels
 ...       191 -     200  are grouped by a factor        2
 ...       201 -     203  are grouped by a factor        3
 ...       204 -     207  are grouped by a factor        2
 ...       208 -     210  are grouped by a factor        3
 ...       211 -     216  are grouped by a factor        2
 ...       217 -     231  are grouped by a factor        3
 ...       232 -     239  are grouped by a factor        4
 ...       240 -     244  are grouped by a factor        5
 ...       245 -     251  are grouped by a factor        7
 ...       252 -     256  are grouped by a factor        5
 ...       257 -     265  are grouped by a factor        9
 ...       266 -     275  are grouped by a factor       10
 ...       276 -     287  are grouped by a factor       12
 ...       288 -     304  are grouped by a factor       17
 ...       305 -     328  are grouped by a factor       24
 ...       329 -     368  are grouped by a factor       40
 ...       369 -     426  are grouped by a factor       58
 ...       427 -     511  are grouped by a factor       85
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s110102_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 3
-> Fetching sis1c3p40_290296.fits
-> Generating ad78011000s110102_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad78011000s110102_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   35 by   34 bins
               expanded to   35 by   34 bins
 First WMAP bin is at detector pixel  360  360
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   45.788     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  503.00  499.00 (detector coordinates)
 Point source at   14.41   34.35 (WMAP bins wrt optical axis)
 Point source at    7.90   67.24 (... in polar coordinates)
 
 Total counts in region = 1.51023E+05
 Weighted mean angle from optical axis  =  7.518 arcmin

-> Standard Output From STOOL group_event_files:

1 ad78011000s100112h.evt 161610
1 ad78011000s100212m.evt 161610

-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_OFFCHIP.2 already present in current directory
-> Extracting ad78011000s110212_1.pi from ad78011000s132002_1.reg and:

ad78011000s100112h.evt
ad78011000s100212m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:23    0.62E+05   119877 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:23    0.62E+05   119877 0001
      2 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.24E+05    41733 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119877    112281           7596         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41733     39065           2668         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        161610    151346          10264         0         0         0
   in  86403.     seconds
 Spectrum         has   151346 counts for  1.752     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 86403.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.97360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s110212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad78011000s100212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad78011000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad78011000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad78011000s110212_1.pi group=yes
Wrote spectrum to ad78011000s110212_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Deleting BLANK keyword from ad78011000s110212_1.pi
-> Grouping ad78011000s110212_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 86403.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.97360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      32  of undefined grouping (Channel quality=bad)
 ...        33 -      35  are grouped by a factor        3
 ...        36 -     279  are single channels
 ...       280 -     281  are grouped by a factor        2
 ...       282 -     301  are single channels
 ...       302 -     303  are grouped by a factor        2
 ...       304 -     312  are single channels
 ...       313 -     316  are grouped by a factor        2
 ...       317 -     319  are single channels
 ...       320 -     367  are grouped by a factor        2
 ...       368 -     373  are grouped by a factor        3
 ...       374 -     379  are grouped by a factor        2
 ...       380 -     394  are grouped by a factor        3
 ...       395 -     398  are grouped by a factor        4
 ...       399 -     401  are grouped by a factor        3
 ...       402 -     417  are grouped by a factor        4
 ...       418 -     422  are grouped by a factor        5
 ...       423 -     430  are grouped by a factor        4
 ...       431 -     435  are grouped by a factor        5
 ...       436 -     443  are grouped by a factor        4
 ...       444 -     463  are grouped by a factor        5
 ...       464 -     479  are grouped by a factor        8
 ...       480 -     490  are grouped by a factor       11
 ...       491 -     502  are grouped by a factor       12
 ...       503 -     512  are grouped by a factor       10
 ...       513 -     546  are grouped by a factor       17
 ...       547 -     570  are grouped by a factor       24
 ...       571 -     599  are grouped by a factor       29
 ...       600 -     637  are grouped by a factor       38
 ...       638 -     709  are grouped by a factor       72
 ...       710 -     787  are grouped by a factor       78
 ...       788 -     916  are grouped by a factor      129
 ...       917 -    1023  are grouped by a factor      107
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000s110212_1.pi
 ** grppha 2.9.0 completed successfully

-> Source occupies chip(s) 3
-> sis1c3p40_290296.fits already present in current directory
-> Generating ad78011000s110212_1.rmf
-> Standard Output From FTOOL sisrmg:

Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C3 Bright2 PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.

-> Generating ad78011000s110212_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   35 by   34 bins
               expanded to   35 by   34 bins
 First WMAP bin is at detector pixel  360  360
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   45.788     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  503.00  499.00 (detector coordinates)
 Point source at   14.41   34.35 (WMAP bins wrt optical axis)
 Point source at    7.90   67.24 (... in polar coordinates)
 
 Total counts in region = 1.51316E+05
 Weighted mean angle from optical axis  =  7.519 arcmin

-> Standard Output From STOOL group_event_files:

1 ad78011000g200170h.evt 137005
1 ad78011000g200270m.evt 137005
1 ad78011000g200370l.evt 137005
1 ad78011000g200470m.evt 137005

-> GIS2_REGION256.4 already present in current directory
-> Extracting ad78011000g210170_1.pi from ad78011000g225670_1.reg and:

ad78011000g200170h.evt
ad78011000g200270m.evt
ad78011000g200370l.evt
ad78011000g200470m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      244     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179     69399          23780         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062     31156          11906         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520       363            157         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244       185             59         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        137005    101103          35902         0         0         0
   in  99536.     seconds
 Spectrum         has   101103 counts for  1.016     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 99536.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad78011000g210170_1.pi group=yes
Wrote spectrum to ad78011000g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad78011000g210170_1.pi
-> Correcting ad78011000g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad78011000g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 97619.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      20  are grouped by a factor       21
 ...        21 -     341  are single channels
 ...       342 -     343  are grouped by a factor        2
 ...       344 -     359  are single channels
 ...       360 -     361  are grouped by a factor        2
 ...       362 -     367  are single channels
 ...       368 -     371  are grouped by a factor        2
 ...       372 -     375  are single channels
 ...       376 -     391  are grouped by a factor        2
 ...       392 -     392  are single channels
 ...       393 -     400  are grouped by a factor        2
 ...       401 -     402  are single channels
 ...       403 -     406  are grouped by a factor        2
 ...       407 -     407  are single channels
 ...       408 -     409  are grouped by a factor        2
 ...       410 -     410  are single channels
 ...       411 -     412  are grouped by a factor        2
 ...       413 -     413  are single channels
 ...       414 -     439  are grouped by a factor        2
 ...       440 -     442  are grouped by a factor        3
 ...       443 -     454  are grouped by a factor        2
 ...       455 -     457  are grouped by a factor        3
 ...       458 -     471  are grouped by a factor        2
 ...       472 -     474  are grouped by a factor        3
 ...       475 -     482  are grouped by a factor        2
 ...       483 -     485  are grouped by a factor        3
 ...       486 -     487  are grouped by a factor        2
 ...       488 -     499  are grouped by a factor        3
 ...       500 -     501  are grouped by a factor        2
 ...       502 -     507  are grouped by a factor        3
 ...       508 -     509  are grouped by a factor        2
 ...       510 -     530  are grouped by a factor        3
 ...       531 -     542  are grouped by a factor        4
 ...       543 -     545  are grouped by a factor        3
 ...       546 -     549  are grouped by a factor        4
 ...       550 -     552  are grouped by a factor        3
 ...       553 -     564  are grouped by a factor        4
 ...       565 -     574  are grouped by a factor        5
 ...       575 -     578  are grouped by a factor        4
 ...       579 -     588  are grouped by a factor        5
 ...       589 -     596  are grouped by a factor        4
 ...       597 -     608  are grouped by a factor        6
 ...       609 -     615  are grouped by a factor        7
 ...       616 -     620  are grouped by a factor        5
 ...       621 -     627  are grouped by a factor        7
 ...       628 -     643  are grouped by a factor        8
 ...       644 -     652  are grouped by a factor        9
 ...       653 -     672  are grouped by a factor       10
 ...       673 -     683  are grouped by a factor       11
 ...       684 -     707  are grouped by a factor       12
 ...       708 -     720  are grouped by a factor       13
 ...       721 -     731  are grouped by a factor       11
 ...       732 -     750  are grouped by a factor       19
 ...       751 -     773  are grouped by a factor       23
 ...       774 -     798  are grouped by a factor       25
 ...       799 -     826  are grouped by a factor       28
 ...       827 -     865  are grouped by a factor       39
 ...       866 -     919  are grouped by a factor       54
 ...       920 -     976  are grouped by a factor       57
 ...       977 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g210170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad78011000g210170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   49   51
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  111.50  113.50 (detector coordinates)
 Point source at   21.50   17.46 (WMAP bins wrt optical axis)
 Point source at    6.80   39.08 (... in polar coordinates)
 
 Total counts in region = 1.00864E+05
 Weighted mean angle from optical axis  =  6.598 arcmin

-> Extracting ad78011000g210170_2.pi from ad78011000g225670_2.reg and:

ad78011000g200170h.evt
ad78011000g200270m.evt
ad78011000g200370l.evt
ad78011000g200470m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      244     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179       972          92207         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062       482          42580         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520         8            512         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244         3            241         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        137005      1465         135540         0         0         0
   in  99536.     seconds
 Spectrum         has     1465 counts for 1.4718E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 99536.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.93300E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g210170_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_2.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad78011000g210170_2.pi group=yes
Wrote spectrum to ad78011000g210170_2.pi
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad78011000g210170_2.pi
-> Correcting ad78011000g210170_2.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad78011000g210170_2.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 97619.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.93300E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      23  are grouped by a factor       24
 ...        24 -      30  are grouped by a factor        7
 ...        31 -      56  are grouped by a factor       13
 ...        57 -      67  are grouped by a factor       11
 ...        68 -      76  are grouped by a factor        9
 ...        77 -      82  are grouped by a factor        6
 ...        83 -      90  are grouped by a factor        8
 ...        91 -      95  are grouped by a factor        5
 ...        96 -     113  are grouped by a factor        6
 ...       114 -     123  are grouped by a factor        5
 ...       124 -     127  are grouped by a factor        4
 ...       128 -     132  are grouped by a factor        5
 ...       133 -     140  are grouped by a factor        8
 ...       141 -     146  are grouped by a factor        6
 ...       147 -     153  are grouped by a factor        7
 ...       154 -     159  are grouped by a factor        6
 ...       160 -     169  are grouped by a factor       10
 ...       170 -     182  are grouped by a factor       13
 ...       183 -     197  are grouped by a factor       15
 ...       198 -     223  are grouped by a factor       26
 ...       224 -     238  are grouped by a factor       15
 ...       239 -     259  are grouped by a factor       21
 ...       260 -     282  are grouped by a factor       23
 ...       283 -     320  are grouped by a factor       38
 ...       321 -     356  are grouped by a factor       36
 ...       357 -     402  are grouped by a factor       46
 ...       403 -     457  are grouped by a factor       55
 ...       458 -     540  are grouped by a factor       83
 ...       541 -     704  are grouped by a factor      164
 ...       705 -     909  are grouped by a factor      205
 ...       910 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g210170_2.pi
 ** grppha 2.9.0 completed successfully

-> gis2v4_0.rmf already present in current directory
-> s2bev1.fits already present in current directory
-> s2gridv3.fits already present in current directory
-> Generating ad78011000g210170_2.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   28 by   27 bins
               expanded to   64 by   64 bins
 First WMAP bin is at detector pixel  104   23
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   39.262     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  134.50   53.00 (detector coordinates)
 Point source at   -1.50   77.96 (WMAP bins wrt optical axis)
 Point source at   19.15   91.10 (... in polar coordinates)
 
 Total counts in region = 1.43700E+03
 Weighted mean angle from optical axis  = 19.334 arcmin

-> Standard Output From STOOL group_event_files:

1 ad78011000g300170h.evt 150065
1 ad78011000g300270m.evt 150065
1 ad78011000g300370l.evt 150065
1 ad78011000g300470m.evt 150065

-> GIS3_REGION256.4 already present in current directory
-> Extracting ad78011000g310170_1.pi from ad78011000g325670_1.reg and:

ad78011000g300170h.evt
ad78011000g300270m.evt
ad78011000g300370l.evt
ad78011000g300470m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      243     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184     77618          24566         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079     34674          12405         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559       424            135         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243       182             61         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150065    112898          37167         0         0         0
   in  99556.     seconds
 Spectrum         has   112898 counts for  1.134     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 99556.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad78011000g310170_1.pi group=yes
Wrote spectrum to ad78011000g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad78011000g310170_1.pi
-> Correcting ad78011000g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad78011000g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 97783.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      20  are grouped by a factor       21
 ...        21 -     385  are single channels
 ...       386 -     387  are grouped by a factor        2
 ...       388 -     393  are single channels
 ...       394 -     395  are grouped by a factor        2
 ...       396 -     397  are single channels
 ...       398 -     399  are grouped by a factor        2
 ...       400 -     400  are single channels
 ...       401 -     402  are grouped by a factor        2
 ...       403 -     405  are single channels
 ...       406 -     409  are grouped by a factor        2
 ...       410 -     411  are single channels
 ...       412 -     413  are grouped by a factor        2
 ...       414 -     414  are single channels
 ...       415 -     416  are grouped by a factor        2
 ...       417 -     417  are single channels
 ...       418 -     419  are grouped by a factor        2
 ...       420 -     420  are single channels
 ...       421 -     434  are grouped by a factor        2
 ...       435 -     435  are single channels
 ...       436 -     437  are grouped by a factor        2
 ...       438 -     438  are single channels
 ...       439 -     480  are grouped by a factor        2
 ...       481 -     483  are grouped by a factor        3
 ...       484 -     489  are grouped by a factor        2
 ...       490 -     501  are grouped by a factor        3
 ...       502 -     503  are grouped by a factor        2
 ...       504 -     512  are grouped by a factor        3
 ...       513 -     518  are grouped by a factor        2
 ...       519 -     522  are grouped by a factor        4
 ...       523 -     537  are grouped by a factor        3
 ...       538 -     545  are grouped by a factor        4
 ...       546 -     551  are grouped by a factor        3
 ...       552 -     555  are grouped by a factor        4
 ...       556 -     561  are grouped by a factor        3
 ...       562 -     565  are grouped by a factor        4
 ...       566 -     568  are grouped by a factor        3
 ...       569 -     572  are grouped by a factor        4
 ...       573 -     577  are grouped by a factor        5
 ...       578 -     581  are grouped by a factor        4
 ...       582 -     586  are grouped by a factor        5
 ...       587 -     590  are grouped by a factor        4
 ...       591 -     595  are grouped by a factor        5
 ...       596 -     599  are grouped by a factor        4
 ...       600 -     604  are grouped by a factor        5
 ...       605 -     608  are grouped by a factor        4
 ...       609 -     613  are grouped by a factor        5
 ...       614 -     619  are grouped by a factor        6
 ...       620 -     629  are grouped by a factor        5
 ...       630 -     635  are grouped by a factor        6
 ...       636 -     640  are grouped by a factor        5
 ...       641 -     652  are grouped by a factor        6
 ...       653 -     657  are grouped by a factor        5
 ...       658 -     667  are grouped by a factor       10
 ...       668 -     673  are grouped by a factor        6
 ...       674 -     680  are grouped by a factor        7
 ...       681 -     688  are grouped by a factor        8
 ...       689 -     708  are grouped by a factor       10
 ...       709 -     717  are grouped by a factor        9
 ...       718 -     729  are grouped by a factor       12
 ...       730 -     743  are grouped by a factor       14
 ...       744 -     754  are grouped by a factor       11
 ...       755 -     770  are grouped by a factor       16
 ...       771 -     787  are grouped by a factor       17
 ...       788 -     809  are grouped by a factor       22
 ...       810 -     832  are grouped by a factor       23
 ...       833 -     857  are grouped by a factor       25
 ...       858 -     896  are grouped by a factor       39
 ...       897 -     932  are grouped by a factor       36
 ...       933 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g310170_1.pi
 ** grppha 2.9.0 completed successfully

-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad78011000g310170_1.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   55   52
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  117.50  114.50 (detector coordinates)
 Point source at    1.86   19.94 (WMAP bins wrt optical axis)
 Point source at    4.92   84.67 (... in polar coordinates)
 
 Total counts in region = 1.12753E+05
 Weighted mean angle from optical axis  =  5.082 arcmin

-> Extracting ad78011000g310170_2.pi from ad78011000g325670_2.reg and:

ad78011000g300170h.evt
ad78011000g300270m.evt
ad78011000g300370l.evt
ad78011000g300470m.evt

-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      243     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184       965         101219         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079       474          46605         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559        10            549         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243         4            239         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150065      1453         148612         0         0         0
   in  99556.     seconds
 Spectrum         has     1453 counts for 1.4595E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 99556.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.99500E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g310170_2.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_2.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad78011000g310170_2.pi group=yes
Wrote spectrum to ad78011000g310170_2.pi
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad78011000g310170_2.pi
-> Correcting ad78011000g310170_2.pi for dead time
-> Standard Output From FTOOL deadtime:

... read all the files from deadlist.tmp

-> Grouping ad78011000g310170_2.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:

 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 97783.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 9.99500E-03     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      30  are grouped by a factor       31
 ...        31 -      47  are grouped by a factor       17
 ...        48 -      61  are grouped by a factor       14
 ...        62 -      70  are grouped by a factor        9
 ...        71 -      76  are grouped by a factor        6
 ...        77 -      80  are grouped by a factor        4
 ...        81 -      92  are grouped by a factor        6
 ...        93 -     102  are grouped by a factor        5
 ...       103 -     106  are grouped by a factor        4
 ...       107 -     113  are grouped by a factor        7
 ...       114 -     118  are grouped by a factor        5
 ...       119 -     146  are grouped by a factor        7
 ...       147 -     154  are grouped by a factor        8
 ...       155 -     160  are grouped by a factor        6
 ...       161 -     176  are grouped by a factor        8
 ...       177 -     186  are grouped by a factor       10
 ...       187 -     220  are grouped by a factor       17
 ...       221 -     238  are grouped by a factor       18
 ...       239 -     257  are grouped by a factor       19
 ...       258 -     283  are grouped by a factor       26
 ...       284 -     315  are grouped by a factor       32
 ...       316 -     352  are grouped by a factor       37
 ...       353 -     404  are grouped by a factor       52
 ...       405 -     460  are grouped by a factor       56
 ...       461 -     533  are grouped by a factor       73
 ...       534 -     663  are grouped by a factor      130
 ...       664 -     797  are grouped by a factor      134
 ...       798 -    1020  are grouped by a factor      223
 ...      1021 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g310170_2.pi
 ** grppha 2.9.0 completed successfully

-> gis3v4_0.rmf already present in current directory
-> s3bev1.fits already present in current directory
-> s3gridv3.fits already present in current directory
-> Generating ad78011000g310170_2.arf with point=yes
-> Standard Output From FTOOL ascaarf:

ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   28 by   27 bins
               expanded to   64 by   64 bins
 First WMAP bin is at detector pixel  111   24
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   39.503     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Point source at  141.50   54.00 (detector coordinates)
 Point source at  -22.14   80.44 (WMAP bins wrt optical axis)
 Point source at   20.49  105.39 (... in polar coordinates)
 
 Total counts in region = 1.42700E+03
 Weighted mean angle from optical axis  = 20.406 arcmin

-> Plotting ad78011000g210170_1_pi.ps from ad78011000g210170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:25:19 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000g210170_1.pi;
 Net count rate (cts/s) for file   1   1.036    +/-  3.2578E-03
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad78011000g210170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad78011000g210170_2_pi.ps from ad78011000g210170_2.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:25:33 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000g210170_2.pi;
 Net count rate (cts/s) for file   1  1.5007E-02+/-  4.0525E-04
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad78011000g210170_2.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad78011000g310170_1_pi.ps from ad78011000g310170_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:25:48 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000g310170_1.pi;
 Net count rate (cts/s) for file   1   1.155    +/-  3.4373E-03
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad78011000g310170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad78011000g310170_2_pi.ps from ad78011000g310170_2.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:26:02 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000g310170_2.pi;
 Net count rate (cts/s) for file   1  1.4859E-02+/-  3.9009E-04
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad78011000g310170_2.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad78011000s010102_1_pi.ps from ad78011000s010102_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:26:16 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000s010102_1.pi;
 Net count rate (cts/s) for file   1   2.230    +/-  5.0439E-03
   using response (RMF) file...       ad78011000s010102_1.rmf
   using auxiliary (ARF) file...      ad78011000s010102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad78011000s010212_1_pi.ps from ad78011000s010212_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:26:31 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000s010212_1.pi;
 Net count rate (cts/s) for file   1   2.236    +/-  5.0511E-03
   using response (RMF) file...       ad78011000s010212_1.rmf
   using auxiliary (ARF) file...      ad78011000s010212_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad78011000s110102_1_pi.ps from ad78011000s110102_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:26:48 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000s110102_1.pi;
 Net count rate (cts/s) for file   1   1.748    +/-  4.4984E-03
   using response (RMF) file...       ad78011000s110102_1.rmf
   using auxiliary (ARF) file...      ad78011000s110102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Plotting ad78011000s110212_1_pi.ps from ad78011000s110212_1.pi
-> Standard Output From STOOL xspec:


               Xspec 11.00 16:27:02 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad78011000s110212_1.pi;
 Net count rate (cts/s) for file   1   1.752    +/-  4.5030E-03
   using response (RMF) file...       ad78011000s110212_1.rmf
   using auxiliary (ARF) file...      ad78011000s110212_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

Extracting light curves (16:27:8)

-> TIMEDEL=4.0000000000E+00 for ad78011000s000102h.evt
-> TIMEDEL=4.0000000000E+00 for ad78011000s000202m.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad78011000s032002_1.reg
-> ... and files: ad78011000s000102h.evt ad78011000s000202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.62E+05   152413 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.62E+05   152413 0100
      2 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.26E+05    55963 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152413    143222           9191         0         0         0
 Writing events file
 143222 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          55963     52509           3454         0         0         0
 Writing events file
 195731 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        208376    195731          12645         0         0         0
   in  87671.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad78011000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad78011000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting ad78011000s000002_1.lc with binsize 22.3958987148633
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.88E+05   195731 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         195731    195731              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        195731    195731              0         0         0         0
   in  87671.     seconds
 Fits light curve has   195731 counts for  2.233     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT > set binsize 22.3958987148633
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad78011000s000002_1.lc
Wrote FITS light curve to file ad78011000s000002_1.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Plotting ad78011000s000002_1.lc in ad78011000s000002_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad78011000s000002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ARAKELIAN 564       Start Time (d) .... 11696 12:34:36.066
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11699 11:26:20.066
 No. of Rows .......         3923        Bin Time (s) ......    22.40
 Right Ascension ... 3.4070E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.9784E+01          Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11696.52402853742  (days)      12:34:36: 66  (h:m:s:ms)
 Expected Stop .... 11699.47662113001  (days)      11:26:20: 66  (h:m:s:ms)
 
 Minimum Newbin Time    22.395899      (s)
 for Maximum Newbin No..            11391
 
 Default Newbin Time is:   498.83457    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     498.83457      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       498.835     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11696 12:38:45
     Ser.1     Avg  2.252        Chisq 0.1250E+05   Var 0.5377     Newbs.    238
               Min  1.005          Max  4.510    expVar 0.1137E-01  Bins   3923
PLT> @lightcurve.pco
!PLT> dev ad78011000s000002_1_lc.ps/ps
!PLT> LA File ad78011000s000002_1.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=4.0000000000E+00 for ad78011000s100102h.evt
-> TIMEDEL=4.0000000000E+00 for ad78011000s100202m.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad78011000s132002_1.reg
-> ... and files: ad78011000s100102h.evt ad78011000s100202m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.62E+05   119606 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.62E+05   119606 0001
      2 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.24E+05    41624 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119606    112347           7259         0         0         0
 Writing events file
 112347 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41624     39087           2537         0         0         0
 Writing events file
 151434 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        161230    151434           9796         0         0         0
   in  86403.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad78011000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad78011000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting ad78011000s100002_1.lc with binsize 28.5282009794806
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.86E+05   151434 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         151434    151434              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        151434    151434              0         0         0         0
   in  86403.     seconds
 Fits light curve has   151434 counts for  1.753     counts/sec
 Thresholding removed significant counts
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT > set binsize 28.5282009794806
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad78011000s100002_1.lc
Wrote FITS light curve to file ad78011000s100002_1.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Plotting ad78011000s100002_1.lc in ad78011000s100002_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad78011000s100002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ARAKELIAN 564       Start Time (d) .... 11696 12:34:36.066
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11699 11:26:20.066
 No. of Rows .......         3018        Bin Time (s) ......    28.53
 Right Ascension ... 3.4070E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.9784E+01          Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11696.52402853742  (days)      12:34:36: 66  (h:m:s:ms)
 Expected Stop .... 11699.47662113001  (days)      11:26:20: 66  (h:m:s:ms)
 
 Minimum Newbin Time    28.528200      (s)
 for Maximum Newbin No..             8943
 
 Default Newbin Time is:   498.83457    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     498.83457      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       498.835     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11696 12:38:45
     Ser.1     Avg  1.766        Chisq  9915.       Var 0.3344     Newbs.    236
               Min 0.8725          Max  3.625    expVar 0.8566E-02  Bins   3018
PLT> @lightcurve.pco
!PLT> dev ad78011000s100002_1_lc.ps/ps
!PLT> LA File ad78011000s100002_1.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=6.2500000000E-02 for ad78011000g200170h.evt
-> TIMEDEL=5.0000000000E-01 for ad78011000g200270m.evt
-> TIMEDEL=2.0000000000E+00 for ad78011000g200370l.evt
-> TIMEDEL=5.0000000000E-01 for ad78011000g200470m.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad78011000g225670_1.reg
-> ... and files: ad78011000g200170h.evt ad78011000g200270m.evt ad78011000g200370l.evt ad78011000g200470m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      244     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179     69399          23780         0         0         0
 Writing events file
  69399 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062     31156          11906         0         0         0
 Writing events file
 100555 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520       363            157         0         0         0
 Writing events file
 100918 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244       185             59         0         0         0
 Writing events file
 101103 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        137005    101103          35902         0         0         0
   in  99536.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad78011000g200070_1.lc with binsize 49.2251967091185
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   101103     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         101103    101103              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        101103    101103              0         0         0         0
   in  99536.     seconds
 Fits light curve has   101103 counts for  1.016     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set binsize 49.2251967091185
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad78011000g200070_1.lc
Wrote FITS light curve to file ad78011000g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Plotting ad78011000g200070_1.lc in ad78011000g200070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad78011000g200070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ARAKELIAN 564       Start Time (d) .... 11696 12:34:36.066
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11699 11:23:05.261
 No. of Rows .......         2021        Bin Time (s) ......    49.23
 Right Ascension ... 3.4070E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.9784E+01          Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11696.52402853742  (days)      12:34:36: 66  (h:m:s:ms)
 Expected Stop .... 11699.47436644726  (days)      11:23: 5:261  (h:m:s:ms)
 
 Minimum Newbin Time    49.225197      (s)
 for Maximum Newbin No..             5179
 
 Default Newbin Time is:   498.45365    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     498.45365      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       498.454     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11696 12:38:45
     Ser.1     Avg  1.037        Chisq  7350.       Var 0.1357     Newbs.    264
               Min 0.4171          Max  2.328    expVar 0.4682E-02  Bins   2021
PLT> @lightcurve.pco
!PLT> dev ad78011000g200070_1_lc.ps/ps
!PLT> LA File ad78011000g200070_1.lc
!PLT> plot
!PLT> quit

-> Extracting events from region ad78011000g225670_2.reg
-> ... and files: ad78011000g200170h.evt ad78011000g200270m.evt ad78011000g200370l.evt ad78011000g200470m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      244     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179       972          92207         0         0         0
 Writing events file
    972 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062       482          42580         0         0         0
 Writing events file
   1454 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520         8            512         0         0         0
 Writing events file
   1462 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244         3            241         0         0         0
 Writing events file
   1465 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        137005      1465         135540         0         0         0
   in  99536.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad78011000g200070_2.lc with binsize 3397.14338763277
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06     1465     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1465      1465              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1465      1465              0         0         0         0
   in  99536.     seconds
 Fits light curve has     1465 counts for 1.4718E-02 counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set binsize 3397.14338763277
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad78011000g200070_2.lc
Wrote FITS light curve to file ad78011000g200070_2.lc
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Plotting ad78011000g200070_2.lc in ad78011000g200070_2_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad78011000g200070_2.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ARAKELIAN 564       Start Time (d) .... 11696 12:34:36.066
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11699 11:23:05.261
 No. of Rows .......           22        Bin Time (s) ......    3397.
 Right Ascension ... 3.4070E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.9784E+01          Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11696.52402853742  (days)      12:34:36: 66  (h:m:s:ms)
 Expected Stop .... 11699.47436644726  (days)      11:23: 5:261  (h:m:s:ms)
 
 Minimum Newbin Time    3397.1433      (s)
 for Maximum Newbin No..               76
 
 Default Newbin Time is:   3397.1433    (s) (to have 1 Intv. of      76 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     3397.1433      (s)
 Maximum Newbin No.                76
 
 Default Newbins per Interval are:        76
 (giving       1 Interval of        76 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with        76 Newbins of       3397.14     (s)
 
      76 analysis results per interval
 
  4% completed
  9% completed
 13% completed
 18% completed
 22% completed
 27% completed
 31% completed
 36% completed
 40% completed
 45% completed
 50% completed
 54% completed
 59% completed
 63% completed
 68% completed
 72% completed
 77% completed
 81% completed
 86% completed
 90% completed
 95% completed
100% completed
 
 Intv    1   Start 11696 13:59:31
     Ser.1     Avg 0.1466E-01    Chisq  24.91       Var 0.6856E-05 Newbs.     22
               Min 0.9146E-02      Max 0.2080E-01expVar 0.6406E-05  Bins     22
PLT> @lightcurve.pco
!PLT> dev ad78011000g200070_2_lc.ps/ps
!PLT> LA File ad78011000g200070_2.lc
!PLT> plot
!PLT> quit

-> TIMEDEL=6.2500000000E-02 for ad78011000g300170h.evt
-> TIMEDEL=5.0000000000E-01 for ad78011000g300270m.evt
-> TIMEDEL=2.0000000000E+00 for ad78011000g300370l.evt
-> TIMEDEL=5.0000000000E-01 for ad78011000g300470m.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad78011000g325670_1.reg
-> ... and files: ad78011000g300170h.evt ad78011000g300270m.evt ad78011000g300370l.evt ad78011000g300470m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      243     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184     77618          24566         0         0         0
 Writing events file
  77618 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079     34674          12405         0         0         0
 Writing events file
 112292 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559       424            135         0         0         0
 Writing events file
 112716 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243       182             61         0         0         0
 Writing events file
 112898 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150065    112898          37167         0         0         0
   in  99556.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad78011000g300070_1.lc with binsize 44.091259913429
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   112898     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
         112898    112898              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        112898    112898              0         0         0         0
   in  99556.     seconds
 Fits light curve has   112898 counts for  1.134     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set binsize 44.091259913429
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad78011000g300070_1.lc
Wrote FITS light curve to file ad78011000g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Plotting ad78011000g300070_1.lc in ad78011000g300070_1_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad78011000g300070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ARAKELIAN 564       Start Time (d) .... 11696 12:34:36.066
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11699 11:23:05.261
 No. of Rows .......         2261        Bin Time (s) ......    44.09
 Right Ascension ... 3.4070E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.9784E+01          Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11696.52402853742  (days)      12:34:36: 66  (h:m:s:ms)
 Expected Stop .... 11699.47436644726  (days)      11:23: 5:261  (h:m:s:ms)
 
 Minimum Newbin Time    44.091259      (s)
 for Maximum Newbin No..             5782
 
 Default Newbin Time is:   498.45365    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     498.45365      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       498.454     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11696 12:38:45
     Ser.1     Avg  1.163        Chisq  7148.       Var 0.1687     Newbs.    267
               Min 0.5408          Max  2.838    expVar 0.5899E-02  Bins   2261
PLT> @lightcurve.pco
!PLT> dev ad78011000g300070_1_lc.ps/ps
!PLT> LA File ad78011000g300070_1.lc
!PLT> plot
!PLT> quit

-> Extracting events from region ad78011000g325670_2.reg
-> ... and files: ad78011000g300170h.evt ad78011000g300270m.evt ad78011000g300370l.evt ad78011000g300470m.evt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      243     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184       965         101219         0         0         0
 Writing events file
    965 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079       474          46605         0         0         0
 Writing events file
   1439 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559        10            549         0         0         0
 Writing events file
   1449 events written to the output file
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243         4            239         0         0         0
 Writing events file
   1453 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        150065      1453         148612         0         0         0
   in  99556.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300470m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad78011000g300070_2.lc with binsize 3425.88786077516
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06     1453     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           1453      1453              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1453      1453              0         0         0         0
   in  99556.     seconds
 Fits light curve has     1453 counts for 1.4595E-02 counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set binsize 3425.88786077516
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad78011000g300070_2.lc
Wrote FITS light curve to file ad78011000g300070_2.lc
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Plotting ad78011000g300070_2.lc in ad78011000g300070_2_lc.ps
-> Standard Output From FTOOL lcurve:

 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad78011000g300070_2.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ARAKELIAN 564       Start Time (d) .... 11696 12:34:36.066
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11699 11:23:05.261
 No. of Rows .......           23        Bin Time (s) ......    3426.
 Right Ascension ... 3.4070E+02          Internal time sys.. Converted to TJD
 Declination ....... 2.9784E+01          Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11696.52402853742  (days)      12:34:36: 66  (h:m:s:ms)
 Expected Stop .... 11699.47436644726  (days)      11:23: 5:261  (h:m:s:ms)
 
 Minimum Newbin Time    3425.8879      (s)
 for Maximum Newbin No..               75
 
 Default Newbin Time is:   3425.8879    (s) (to have 1 Intv. of      75 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     3425.8879      (s)
 Maximum Newbin No.                75
 
 Default Newbins per Interval are:        75
 (giving       1 Interval of        75 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with        75 Newbins of       3425.89     (s)
 
      75 analysis results per interval
 
  4% completed
  8% completed
 13% completed
 17% completed
 21% completed
 26% completed
 30% completed
 34% completed
 39% completed
 43% completed
 47% completed
 52% completed
 56% completed
 60% completed
 65% completed
 69% completed
 73% completed
 78% completed
 82% completed
 86% completed
 91% completed
 95% completed
100% completed
 
 Intv    1   Start 11696 14: 0:14
     Ser.1     Avg 0.1421E-01    Chisq  37.29       Var 0.9329E-05 Newbs.     23
               Min 0.8412E-02      Max 0.1962E-01expVar 0.6143E-05  Bins     23
PLT> @lightcurve.pco
!PLT> dev ad78011000g300070_2_lc.ps/ps
!PLT> LA File ad78011000g300070_2.lc
!PLT> plot
!PLT> quit

-> Merging GTIs from the following files:

ad78011000g200170h.evt[2]
ad78011000g200270m.evt[2]
ad78011000g200370l.evt[2]
ad78011000g200470m.evt[2]

-> Making L1 light curve of ft000601_1151_1200G2HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve: 170086 output records from  170209  good input G2_L1    records.

-> Making L1 light curve of ft000601_1151_1200G2HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  93937 output records from  201581  good input G2_L1    records.

-> Merging GTIs from the following files:

ad78011000g300170h.evt[2]
ad78011000g300270m.evt[2]
ad78011000g300370l.evt[2]
ad78011000g300470m.evt[2]

-> Making L1 light curve of ft000601_1151_1200G3HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve: 168342 output records from  168464  good input G3_L1    records.

-> Making L1 light curve of ft000601_1151_1200G3HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:

ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  93684 output records from  199786  good input G3_L1    records.

Extracting source event files (16:42:0)

-> Extracting unbinned light curve ad78011000g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179     69399          23780         0         0         0
 Writing events file
  69399 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93179     69399          23780         0         0         0
   in  66057.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200170.ulc use_events=yes
Wrote events list to file ad78011000g200170.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g200170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05    93179     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          93179       972          92207         0         0         0
 Writing events file
    972 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93179       972          92207         0         0         0
   in  66057.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200170.ulc use_events=yes
Wrote events list to file ad78011000g200170.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062     31156          11906         0         0         0
 Writing events file
  31156 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         43062     31156          11906         0         0         0
   in  32914.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200270.ulc use_events=yes
Wrote events list to file ad78011000g200270.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g200270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    43062     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          43062       482          42580         0         0         0
 Writing events file
    482 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         43062       482          42580         0         0         0
   in  32914.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200270.ulc use_events=yes
Wrote events list to file ad78011000g200270.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g200370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520       363            157         0         0         0
 Writing events file
    363 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           520       363            157         0         0         0
   in  357.46     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200370.ulc use_events=yes
Wrote events list to file ad78011000g200370.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g200370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      520     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            520         8            512         0         0         0
 Writing events file
      8 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           520         8            512         0         0         0
   in  357.46     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200370.ulc use_events=yes
Wrote events list to file ad78011000g200370.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad78011000g200370.ulc since it has 8 events
-> Extracting unbinned light curve ad78011000g200470.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      244     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244       185             59         0         0         0
 Writing events file
    185 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           244       185             59         0         0         0
   in  208.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200470m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200470.ulc use_events=yes
Wrote events list to file ad78011000g200470.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g200470.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      244     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            244         3            241         0         0         0
 Writing events file
      3 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           244         3            241         0         0         0
   in  208.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200470m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad78011000g225670_2.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad78011000g200470.ulc use_events=yes
Wrote events list to file ad78011000g200470.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad78011000g200470.ulc since it has 3 events
-> Extracting unbinned light curve ad78011000g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184     77618          24566         0         0         0
 Writing events file
  77618 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        102184     77618          24566         0         0         0
   in  66045.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300170.ulc use_events=yes
Wrote events list to file ad78011000g300170.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g300170.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.66E+05   102184     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         102184       965         101219         0         0         0
 Writing events file
    965 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        102184       965         101219         0         0         0
   in  66045.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300170.ulc use_events=yes
Wrote events list to file ad78011000g300170.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079     34674          12405         0         0         0
 Writing events file
  34674 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47079     34674          12405         0         0         0
   in  32946.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300270.ulc use_events=yes
Wrote events list to file ad78011000g300270.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g300270.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.33E+05    47079     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          47079       474          46605         0         0         0
 Writing events file
    474 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         47079       474          46605         0         0         0
   in  32946.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300270.ulc use_events=yes
Wrote events list to file ad78011000g300270.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g300370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559       424            135         0         0         0
 Writing events file
    424 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           559       424            135         0         0         0
   in  357.46     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300370.ulc use_events=yes
Wrote events list to file ad78011000g300370.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g300370.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.36E+03      559     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            559        10            549         0         0         0
 Writing events file
     10 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           559        10            549         0         0         0
   in  357.46     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300370.ulc use_events=yes
Wrote events list to file ad78011000g300370.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g300470.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      243     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243       182             61         0         0         0
 Writing events file
    182 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           243       182             61         0         0         0
   in  208.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300470m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300470.ulc use_events=yes
Wrote events list to file ad78011000g300470.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Extracting unbinned light curve ad78011000g300470.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.21E+03      243     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            243         4            239         0         0         0
 Writing events file
      4 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           243         4            239         0         0         0
   in  208.00     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300470m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad78011000g325670_2.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad78011000g300470.ulc use_events=yes
Wrote events list to file ad78011000g300470.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad78011000g300470.ulc since it has 4 events
-> Extracting unbinned light curve ad78011000s000102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.62E+05   152413 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152413    143222           9191         0         0         0
 Writing events file
 143222 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        152413    143222           9191         0         0         0
   in  61910.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad78011000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad78011000s000102.ulc use_events=yes
Wrote events list to file ad78011000s000102.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad78011000s000112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:27    0.62E+05   152966 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         152966    143632           9334         0         0         0
 Writing events file
 143632 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        152966    143632           9334         0         0         0
   in  61910.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad78011000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad78011000s000112.ulc use_events=yes
Wrote events list to file ad78011000s000112.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad78011000s000202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.26E+05    55963 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          55963     52509           3454         0         0         0
 Writing events file
  52509 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         55963     52509           3454         0         0         0
   in  25761.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad78011000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad78011000s000202.ulc use_events=yes
Wrote events list to file ad78011000s000202.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad78011000s000212.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.26E+05    56190 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          56190     52671           3519         0         0         0
 Writing events file
  52671 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         56190     52671           3519         0         0         0
   in  25761.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s000212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad78011000s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad78011000s000212.ulc use_events=yes
Wrote events list to file ad78011000s000212.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad78011000s100102.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.62E+05   119606 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119606    112347           7259         0         0         0
 Writing events file
 112347 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119606    112347           7259         0         0         0
   in  62050.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad78011000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad78011000s100102.ulc use_events=yes
Wrote events list to file ad78011000s100102.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad78011000s100112.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:23    0.62E+05   119877 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
         119877    112565           7312         0         0         0
 Writing events file
 112565 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        119877    112565           7312         0         0         0
   in  62050.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad78011000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad78011000s100112.ulc use_events=yes
Wrote events list to file ad78011000s100112.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Extracting unbinned light curve ad78011000s100202.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.24E+05    41624 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41624     39087           2537         0         0         0
 Writing events file
  39087 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         41624     39087           2537         0         0         0
   in  24352.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad78011000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad78011000s100202.ulc use_events=yes
Wrote events list to file ad78011000s100202.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no

-> Extracting unbinned light curve ad78011000s100212.ulc
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.24E+05    41733 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
          41733     39164           2569         0         0         0
 Writing events file
  39164 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         41733     39164           2569         0         0         0
   in  24352.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000s100212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad78011000s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad78011000s100212.ulc use_events=yes
Wrote events list to file ad78011000s100212.ulc
Changing Data directory from:
    /data/data22/seq_proc/ad0_78011000.001/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Extracting FRAME mode data (16:53:15)

-> Extracting frame mode data from ft000601_1151.1200
-> Standard Output From STOOL tlmFrm:

 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 62484

Total of 0 sets of frame data are extracted.

-> Extracting corner pixel GTIs with the following criteria:

SUNSHINE==0 &&
T_DY_NT>64 &&
T_SAA>64 &&
SAA==0 &&
COR>6 &&
(ELV>10 || ELV<10 )

-> Extracting GTIs from ft000601_1151_1200.mkf
-> Generating corner pixel histogram ad78011000s000101_1.cnr
-> Generating corner pixel histogram ad78011000s000201_1.cnr
-> Generating corner pixel histogram ad78011000s000301_1.cnr
-> Generating corner pixel histogram ad78011000s100101_3.cnr
-> Generating corner pixel histogram ad78011000s100201_3.cnr
-> Generating corner pixel histogram ad78011000s100301_3.cnr

Extracting GIS calibration source spectra (17:9:43)

-> Standard Output From STOOL group_event_files:

1 ad78011000g200170h.unf 492551
1 ad78011000g200270m.unf 492551
1 ad78011000g200370l.unf 492551
1 ad78011000g200470m.unf 492551
1 ad78011000g200570l.unf 492551
1 ad78011000g200670l.unf 492551

-> Fetching GIS2_CALSRC256.2
-> Extracting ad78011000g220170.cal from ad78011000g200170h.unf ad78011000g200270m.unf ad78011000g200370l.unf ad78011000g200470m.unf ad78011000g200570l.unf ad78011000g200670l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    92704     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    92704     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3097     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    92704     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3097     1024
      5 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2051     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    92704     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3097     1024
      5 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2051     1024
      6 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      532     1024
extractor v3.71  3 Jan 2000
Input event files have inconsistent FILTER
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         234304     11507         222797         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         159863      7628         152235         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          92704      4570          88134         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3097       121           2976         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200570l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2051        63           1988         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200670l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            532        20            512         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        492551     23909         468642         0         0         0
   in 1.86425E+05 seconds
 Spectrum         has    23909 counts for 0.1282     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 1.86425E+05     Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200470m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200570l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   5
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > read events ad78011000g200670l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   6
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad78011000g220170.cal group=yes
Wrote spectrum to ad78011000g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no

-> Deleting BLANK keyword from ad78011000g220170.cal
-> gis2v4_0.rmf already present in current directory
-> Plotting ad78011000g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 17:10:49 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad78011000g220170.cal;
 Net count rate (cts/s) for file   1  0.1282    +/-  8.2951E-04
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     2.5782602E+08 using    84 PHA bins.
 Reduced chi-squared =      3392448.     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     2.5782602E+08 using    84 PHA bins.
 Reduced chi-squared =      3348390.     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     2.5782602E+08 using    84 PHA bins.
 Reduced chi-squared =      3305462.     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      6264.849     using    84 PHA bins.
 Reduced chi-squared =      79.30188     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   736.635     -4         0.      2.9570E-03   5.982          0.
              4.0038E-02  7.9166E-03
   516.188     -5         0.      1.5496E-03   5.970          0.
              4.1108E-02  8.2336E-03
   482.021     -6         0.      2.5388E-03   5.958          0.
              4.0730E-02  8.9103E-03
   454.756     -7         0.      1.8727E-03   5.946          0.
              4.0722E-02  8.8526E-03
   445.816      0         0.      2.0740E-03   5.939          0.
              4.0944E-02  9.0466E-03
   445.635      0         0.      2.0785E-03   5.935          0.
              4.0998E-02  9.0270E-03
   445.498      0         0.      2.0823E-03   5.932          0.
              4.1046E-02  9.0085E-03
   445.393      0         0.      2.0856E-03   5.929          0.
              4.1091E-02  8.9911E-03
   445.316      0         0.      2.0883E-03   5.926          0.
              4.1131E-02  8.9749E-03
 Number of trials exceeded - last iteration delta =   7.7759E-02
   445.304      1         0.      2.0885E-03   5.926          0.
              4.1136E-02  8.9725E-03
   445.292      1         0.      2.0887E-03   5.925          0.
              4.1141E-02  8.9702E-03
   445.281      1         0.      2.0889E-03   5.925          0.
              4.1146E-02  8.9679E-03
   445.271      1         0.      2.0891E-03   5.925          0.
              4.1151E-02  8.9657E-03
   445.261      1         0.      2.0893E-03   5.924          0.
              4.1156E-02  8.9634E-03
   445.260      2         0.      2.0893E-03   5.924          0.
              4.1157E-02  8.9632E-03
   286.062     -3         0.      2.0841E-03   5.914      7.0705E-02
              4.0577E-02  9.3461E-03
   146.400     -4         0.      1.6888E-03   5.936      0.1874
              4.3403E-02  8.7051E-03
   82.0875     -5         0.      1.8793E-03   5.954      0.1688
              4.5214E-02  7.0896E-03
   80.3809     -6         0.      1.7734E-03   5.952      0.1632
              4.5091E-02  7.3113E-03
 Number of trials exceeded - last iteration delta =    1.707
   80.2233     -7         0.      1.8454E-03   5.952      0.1626
              4.5053E-02  7.3193E-03
   80.1265     -8         0.      1.7953E-03   5.952      0.1626
              4.5050E-02  7.3218E-03
   80.0809     -9         0.      1.8299E-03   5.952      0.1626
              4.5050E-02  7.3218E-03
   80.0585    -10         0.      1.8059E-03   5.952      0.1626
              4.5050E-02  7.3218E-03
   80.0478    -11         0.      1.8225E-03   5.952      0.1626
              4.5050E-02  7.3218E-03
   80.0427    -12         0.      1.8110E-03   5.952      0.1626
              4.5050E-02  7.3218E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 1.33E-08 | -0.99  0.00 -0.01 -0.04 -0.11
 1.07E-07 |  0.11 -0.05 -0.01 -0.11 -0.99
 2.80E-07 | -0.03 -0.04 -0.04  0.99 -0.11
 1.37E-05 |  0.01  0.88 -0.47  0.01 -0.04
 4.53E-05 |  0.00  0.47  0.88  0.05 -0.04
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.8110E-03 +/-  0.1255E-03
    3    3    2   gaussian/b LineE    keV        5.952     +/-  0.4538E-02
    4    4    2   gaussian/b Sigma    keV       0.1626     +/-  0.6179E-02
    5    5    2   gaussian/b norm               4.5050E-02 +/-  0.6189E-03
    6    3    3   gaussian/b LineE    keV        6.553     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1706     = par   4 *   1.049
    8    6    3   gaussian/b norm               7.3218E-03 +/-  0.4373E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      80.04273     using    84 PHA bins.
 Reduced chi-squared =      1.013199     for     79 degrees of freedom
 Null hypothesis probability = 0.446

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad78011000g220170.cal peaks at 5.952 +/- 0.004538 keV
-> Standard Output From STOOL group_event_files:

1 ad78011000g300170h.unf 502801
1 ad78011000g300270m.unf 502801
1 ad78011000g300370l.unf 502801
1 ad78011000g300470m.unf 502801
1 ad78011000g300570l.unf 502801
1 ad78011000g300670l.unf 502801

-> Fetching GIS3_CALSRC256.2
-> Extracting ad78011000g320170.cal from ad78011000g300170h.unf ad78011000g300270m.unf ad78011000g300370l.unf ad78011000g300470m.unf ad78011000g300570l.unf ad78011000g300670l.unf
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    93007     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    93007     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3211     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    93007     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3211     1024
      5 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2042     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
      2 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
      3 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    93007     1024
      4 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3211     1024
      5 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2042     1024
      6 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      516     1024
extractor v3.71  3 Jan 2000
Input event files have inconsistent FILTER
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         240563      9651         230912         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         163462      6307         157155         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          93007      3869          89138         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3211       118           3093         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300570l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2042        56           1986         0         0         0
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300670l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            516        20            496         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        502801     20021         482780         0         0         0
   in 1.86433E+05 seconds
 Spectrum         has    20021 counts for 0.1074     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 1.86433E+05     Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad78011000g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA > read events ad78011000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300470m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   4
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300570l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   5
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > read events ad78011000g300670l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   6
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad78011000g320170.cal group=yes
Wrote spectrum to ad78011000g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no

-> Deleting BLANK keyword from ad78011000g320170.cal
-> gis3v4_0.rmf already present in current directory
-> Plotting ad78011000g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:


               Xspec 11.00 17:12:05 30-Jun-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad78011000g320170.cal;
 Net count rate (cts/s) for file   1  0.1074    +/-  7.5906E-04
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     4.1295408E+08 using    84 PHA bins.
 Reduced chi-squared =      5433606.     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     4.1295408E+08 using    84 PHA bins.
 Reduced chi-squared =      5363040.     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     4.1295408E+08 using    84 PHA bins.
 Reduced chi-squared =      5294283.     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      7053.696     using    84 PHA bins.
 Reduced chi-squared =      89.28729     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   716.270     -1         0.      8.2361E-04   5.891          0.
              3.8150E-02  9.4407E-03
   551.944     -2         0.      1.5615E-03   5.868          0.
              4.1108E-02  7.1602E-03
   374.138     -3         0.      1.0600E-03   5.815          0.
              4.0808E-02  7.6726E-03
   349.412     -4         0.      1.3271E-03   5.823          0.
              3.9959E-02  8.9893E-03
   349.305     -2         0.      1.1307E-03   5.835          0.
              4.0338E-02  8.2896E-03
   347.719      0         0.      1.1439E-03   5.838          0.
              4.0283E-02  8.3308E-03
   347.566      1         0.      1.1451E-03   5.838          0.
              4.0277E-02  8.3354E-03
   347.417      1         0.      1.1463E-03   5.838          0.
              4.0271E-02  8.3400E-03
   347.271      1         0.      1.1475E-03   5.839          0.
              4.0265E-02  8.3445E-03
 Number of trials exceeded - last iteration delta =   0.1454
   347.130      1         0.      1.1486E-03   5.839          0.
              4.0258E-02  8.3489E-03
   347.116      2         0.      1.1487E-03   5.839          0.
              4.0258E-02  8.3494E-03
   347.102      2         0.      1.1488E-03   5.839          0.
              4.0257E-02  8.3498E-03
   347.088      2         0.      1.1489E-03   5.839          0.
              4.0257E-02  8.3502E-03
   347.074      2         0.      1.1491E-03   5.839          0.
              4.0256E-02  8.3507E-03
   347.060      2         0.      1.1492E-03   5.839          0.
              4.0255E-02  8.3511E-03
   347.058      3         0.      1.1492E-03   5.839          0.
              4.0255E-02  8.3512E-03
   155.453     -1         0.      1.1586E-03   5.833      0.1474
              4.1232E-02  7.6067E-03
   98.9363     -2         0.      9.1792E-04   5.853      0.1423
              4.3799E-02  6.3890E-03
   97.0148     -3         0.      1.1451E-03   5.852      0.1367
              4.3808E-02  6.5259E-03
 Number of trials exceeded - last iteration delta =    1.921
   95.4671     -4         0.      9.5954E-04   5.852      0.1362
              4.3795E-02  6.5115E-03
   94.7152     -5         0.      1.1097E-03   5.852      0.1362
              4.3796E-02  6.5135E-03
   94.1393     -6         0.      9.8750E-04   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.8044     -7         0.      1.0864E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.5609     -8         0.      1.0060E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.4132     -9         0.      1.0711E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.3093    -10         0.      1.0182E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.2443    -11         0.      1.0610E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.1998    -12         0.      1.0263E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.1716    -13         0.      1.0545E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
 Number of trials exceeded - last iteration delta =   2.8198E-02
   93.1523    -14         0.      1.0316E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.1401    -15         0.      1.0501E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
   93.1317    -16         0.      1.0351E-03   5.852      0.1362
              4.3796E-02  6.5134E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 9.38E-09 | -1.00  0.00  0.00 -0.03 -0.08
 9.34E-08 |  0.08 -0.04 -0.01 -0.10 -0.99
 2.64E-07 | -0.02 -0.03 -0.03  0.99 -0.10
 3.87E-05 |  0.00  0.38  0.92  0.04 -0.03
 1.16E-05 |  0.00 -0.92  0.38 -0.01  0.04
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.0351E-03 +/-  0.1032E-03
    3    3    2   gaussian/b LineE    keV        5.852     +/-  0.3940E-02
    4    4    2   gaussian/b Sigma    keV       0.1362     +/-  0.5886E-02
    5    5    2   gaussian/b norm               4.3796E-02 +/-  0.5739E-03
    6    3    3   gaussian/b LineE    keV        6.443     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1430     = par   4 *   1.049
    8    6    3   gaussian/b norm               6.5134E-03 +/-  0.3878E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      93.13171     using    84 PHA bins.
 Reduced chi-squared =      1.178882     for     79 degrees of freedom
 Null hypothesis probability = 0.132

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

-> Calibration source ad78011000g320170.cal peaks at 5.852 +/- 0.00394 keV

Extracting bright and dark Earth event files. (17:12:10)

-> Extracting bright and dark Earth events from ad78011000s000102h.unf
-> Extracting ad78011000s000102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:27    0.11E+06   284501 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         284501      3482              0    281019         0         0
 Writing events file
   3482 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        284501      3482              0    281019         0         0
   in  5669.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad78011000s000102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s000102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         3482
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        2621
 Flickering pixels iter, pixels & cnts :   1           1           3
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            4
 Number of (internal) image counts   :         3482
 Number of image cts rejected (N, %) :         262475.36
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            4            0            0
 
 Image counts      :             0         3482            0            0
 Image cts rejected:             0         2624            0            0
 Image cts rej (%) :          0.00        75.36         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         3482            0            0
 Total cts rejected:             0         2624            0            0
 Total cts rej (%) :          0.00        75.36         0.00         0.00
 
 Number of clean counts accepted  :          858
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            4
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s000112h.unf
-> Extracting ad78011000s000112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:27    0.11E+06   285752 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         285752      3536              0    282216         0         0
 Writing events file
   3536 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        285752      3536              0    282216         0         0
   in  5669.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad78011000s000112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s000112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         3536
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        2621
 Flickering pixels iter, pixels & cnts :   1           1           3
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            4
 Number of (internal) image counts   :         3536
 Number of image cts rejected (N, %) :         262474.21
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            4            0            0
 
 Image counts      :             0         3536            0            0
 Image cts rejected:             0         2624            0            0
 Image cts rej (%) :          0.00        74.21         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         3536            0            0
 Total cts rejected:             0         2624            0            0
 Total cts rej (%) :          0.00        74.21         0.00         0.00
 
 Number of clean counts accepted  :          912
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            4
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s000202m.unf
-> Extracting ad78011000s000202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.58E+05   116141 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         116141      1021              0    115120         0         0
 Writing events file
   1021 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        116141      1021              0    115120         0         0
   in  1371.8     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad78011000s000202m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s000202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 File NEVENTS keyword value  :         1021
 Total counts in chip images :         1020
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2         619
 Flickering pixels iter, pixels & cnts :   1           2          13
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            4
 Number of (internal) image counts   :         1020
 Number of image cts rejected (N, %) :          63261.96
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            4            0            0
 
 Image counts      :             0         1020            0            0
 Image cts rejected:             0          632            0            0
 Image cts rej (%) :          0.00        61.96         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1021            0            0
 Total cts rejected:             0          633            0            0
 Total cts rej (%) :          0.00        62.00         0.00         0.00
 
 Number of clean counts accepted  :          388
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            4
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s000212m.unf
-> Extracting ad78011000s000212m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.58E+05   116702 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000212m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         116702      1037              0    115665         0         0
 Writing events file
   1037 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        116702      1037              0    115665         0         0
   in  1371.8     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s000212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad78011000s000212m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s000212m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1037
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2         620
 Flickering pixels iter, pixels & cnts :   1           2          13
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            4
 Number of (internal) image counts   :         1037
 Number of image cts rejected (N, %) :          63361.04
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            4            0            0
 
 Image counts      :             0         1037            0            0
 Image cts rejected:             0          633            0            0
 Image cts rej (%) :          0.00        61.04         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1037            0            0
 Total cts rejected:             0          633            0            0
 Total cts rej (%) :          0.00        61.04         0.00         0.00
 
 Number of clean counts accepted  :          404
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            4
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s000302l.unf
-> Extracting ad78011000s000302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT      LOW         2000-06-01  17:58:35    0.40E+05    10709 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          10709      2954              0      7755         0         0
 Writing events file
   2954 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10709      2954              0      7755         0         0
   in  4783.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad78011000s000302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s000302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         2954
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2        2130
 Flickering pixels iter, pixels & cnts :   1           1          14
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :         2954
 Number of image cts rejected (N, %) :         214472.58
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0         2954            0            0
 Image cts rejected:             0         2144            0            0
 Image cts rej (%) :          0.00        72.58         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         2954            0            0
 Total cts rejected:             0         2144            0            0
 Total cts rej (%) :          0.00        72.58         0.00         0.00
 
 Number of clean counts accepted  :          810
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s000312l.unf
-> Extracting ad78011000s000312l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ARAKELIAN 5 BRIGHT2     LOW         2000-06-01  17:58:35    0.40E+05    10824 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s000312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          10824      3001              0      7823         0         0
 Writing events file
   3001 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10824      3001              0      7823         0         0
   in  4783.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad78011000s000312l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s000312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 File NEVENTS keyword value  :         3001
 Total counts in chip images :         3000
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               2        2130
 Flickering pixels iter, pixels & cnts :   1           1          14
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :         3000
 Number of image cts rejected (N, %) :         214471.47
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0         3000            0            0
 Image cts rejected:             0         2144            0            0
 Image cts rej (%) :          0.00        71.47         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         3001            0            0
 Total cts rejected:             0         2144            0            0
 Total cts rej (%) :          0.00        71.44         0.00         0.00
 
 Number of clean counts accepted  :          857
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s100102h.unf
-> Extracting ad78011000s100102h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      HIGH        2000-06-01  11:51:23    0.11E+06   269545 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         269545      5034              0    264511         0         0
 Writing events file
   5034 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        269545      5034              0    264511         0         0
   in  5677.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad78011000s100102h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s100102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         5034
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4        4281
 Flickering pixels iter, pixels & cnts :   1           2          31
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         5034
 Number of image cts rejected (N, %) :         431285.66
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         5034
 Image cts rejected:             0            0            0         4312
 Image cts rej (%) :          0.00         0.00         0.00        85.66
 
    filtering data...
 
 Total counts      :             0            0            0         5034
 Total cts rejected:             0            0            0         4312
 Total cts rej (%) :          0.00         0.00         0.00        85.66
 
 Number of clean counts accepted  :          722
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s100112h.unf
-> Extracting ad78011000s100112h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     HIGH        2000-06-01  11:51:23    0.11E+06   270223 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         270223      5061              0    265162         0         0
 Writing events file
   5061 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        270223      5061              0    265162         0         0
   in  5677.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad78011000s100112h.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s100112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 File NEVENTS keyword value  :         5061
 Total counts in chip images :         5060
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4        4280
 Flickering pixels iter, pixels & cnts :   1           2          31
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         5060
 Number of image cts rejected (N, %) :         431185.20
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         5060
 Image cts rejected:             0            0            0         4311
 Image cts rej (%) :          0.00         0.00         0.00        85.20
 
    filtering data...
 
 Total counts      :             0            0            0         5061
 Total cts rejected:             0            0            0         4312
 Total cts rej (%) :          0.00         0.00         0.00        85.20
 
 Number of clean counts accepted  :          749
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s100202m.unf
-> Extracting ad78011000s100202m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      MEDIUM      2000-06-01  12:58:19    0.58E+05   118544 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         118544      1360              0    117184         0         0
 Writing events file
   1360 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        118544      1360              0    117184         0         0
   in  1371.8     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad78011000s100202m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s100202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1360
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               3        1018
 Flickering pixels iter, pixels & cnts :   1           3          17
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         1360
 Number of image cts rejected (N, %) :         103576.10
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         1360
 Image cts rejected:             0            0            0         1035
 Image cts rej (%) :          0.00         0.00         0.00        76.10
 
    filtering data...
 
 Total counts      :             0            0            0         1360
 Total cts rejected:             0            0            0         1035
 Total cts rej (%) :          0.00         0.00         0.00        76.10
 
 Number of clean counts accepted  :          325
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s100212m.unf
-> Extracting ad78011000s100212m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     MEDIUM      2000-06-01  12:58:19    0.58E+05   118884 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100212m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         118884      1371              0    117513         0         0
 Writing events file
   1371 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        118884      1371              0    117513         0         0
   in  1371.8     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s100212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad78011000s100212m.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s100212m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1371
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               3        1018
 Flickering pixels iter, pixels & cnts :   1           3          17
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         1371
 Number of image cts rejected (N, %) :         103575.49
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         1371
 Image cts rejected:             0            0            0         1035
 Image cts rej (%) :          0.00         0.00         0.00        75.49
 
    filtering data...
 
 Total counts      :             0            0            0         1371
 Total cts rejected:             0            0            0         1035
 Total cts rej (%) :          0.00         0.00         0.00        75.49
 
 Number of clean counts accepted  :          336
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s100302l.unf
-> Extracting ad78011000s100302l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT      LOW         2000-06-01  17:58:35    0.40E+05    17427 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17427      4044              0     13383         0         0
 Writing events file
   4044 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17427      4044              0     13383         0         0
   in  4783.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no

-> Cleaning hot pixels from ad78011000s100302l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s100302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4044
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4        3353
 Flickering pixels iter, pixels & cnts :   1           2          10
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         4044
 Number of image cts rejected (N, %) :         336383.16
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         4044
 Image cts rejected:             0            0            0         3363
 Image cts rej (%) :          0.00         0.00         0.00        83.16
 
    filtering data...
 
 Total counts      :             0            0            0         4044
 Total cts rejected:             0            0            0         3363
 Total cts rej (%) :          0.00         0.00         0.00        83.16
 
 Number of clean counts accepted  :          681
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000s100312l.unf
-> Extracting ad78011000s100312l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ARAKELIAN 5 BRIGHT2     LOW         2000-06-01  17:58:35    0.40E+05    17507 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000s100312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17507      4062              0     13445         0         0
 Writing events file
   4062 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17507      4062              0     13445         0         0
   in  4783.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no

-> Cleaning hot pixels from ad78011000s100312l.unf
-> Standard Output From FTOOL cleansis:

CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad78011000s100312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4062
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4        3354
 Flickering pixels iter, pixels & cnts :   1           2          10
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         4062
 Number of image cts rejected (N, %) :         336482.82
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         4062
 Image cts rejected:             0            0            0         3364
 Image cts rej (%) :          0.00         0.00         0.00        82.82
 
    filtering data...
 
 Total counts      :             0            0            0         4062
 Total cts rejected:             0            0            0         3364
 Total cts rej (%) :          0.00         0.00         0.00        82.82
 
 Number of clean counts accepted  :          698
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...

-> Extracting bright and dark Earth events from ad78011000g200170h.unf
-> Extracting ad78011000g200170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         234304      3242              0    231062         0         0
 Writing events file
   3242 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        234304      3242              0    231062         0         0
   in  5606.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad78011000g200170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   234304     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         234304     76700              0    157604         0         0
 Writing events file
  76700 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        234304     76700              0    157604         0         0
   in  15429.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g200270m.unf
-> Extracting ad78011000g200270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         159863      1347              0    158516         0         0
 Writing events file
   1347 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        159863      1347              0    158516         0         0
   in  1428.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad78011000g200270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   159863     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         159863     89904              0     69959         0         0
 Writing events file
  89904 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        159863     89904              0     69959         0         0
   in  14785.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g200370l.unf
-> Extracting ad78011000g200370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    92704     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          92704      3367              0     89337         0         0
 Writing events file
   3367 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         92704      3367              0     89337         0         0
   in  4791.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting ad78011000g200370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    92704     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          92704     85030              0      7674         0         0
 Writing events file
  85030 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         92704     85030              0      7674         0         0
   in  25004.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g200470m.unf
-> Extracting ad78011000g200470m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3097     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200470m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad78011000g200470m.drk since it contains 0 events
-> Extracting ad78011000g200470m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3097     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200470m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3097      2294              0       803         0         0
 Writing events file
   2294 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3097      2294              0       803         0         0
   in  231.55     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200470m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g200570l.unf
-> Extracting ad78011000g200570l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2051     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200570l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200570l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad78011000g200570l.drk since it contains 0 events
-> Extracting ad78011000g200570l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2051     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200570l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2051      1216              0       835         0         0
 Writing events file
   1216 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2051      1216              0       835         0         0
   in  303.46     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200570l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g200670l.unf
-> Extracting ad78011000g200670l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      532     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200670l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200670l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Deleting ad78011000g200670l.drk since it contains 0 events
-> Extracting ad78011000g200670l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      532     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g200670l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            532       390              0       142         0         0
 Writing events file
    390 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           532       390              0       142         0         0
   in  128.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g200670l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g300170h.unf
-> Extracting ad78011000g300170h.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         240563      2966              0    237597         0         0
 Writing events file
   2966 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        240563      2966              0    237597         0         0
   in  5606.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad78011000g300170h.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          HIGH        2000-06-01  11:51:34    0.10E+06   240563     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         240563     78385              0    162178         0         0
 Writing events file
  78385 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        240563     78385              0    162178         0         0
   in  15419.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g300270m.unf
-> Extracting ad78011000g300270m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         163462      1366              0    162096         0         0
 Writing events file
   1366 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        163462      1366              0    162096         0         0
   in  1428.7     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad78011000g300270m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  16:39:48    0.53E+05   163462     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
         163462     91540              0     71922         0         0
 Writing events file
  91540 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
        163462     91540              0     71922         0         0
   in  14785.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g300370l.unf
-> Extracting ad78011000g300370l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    93007     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          93007      3178              0     89829         0         0
 Writing events file
   3178 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93007      3178              0     89829         0         0
   in  4791.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting ad78011000g300370l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-01  18:15:47    0.32E+05    93007     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          93007     85544              0      7463         0         0
 Writing events file
  85544 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         93007     85544              0      7463         0         0
   in  25004.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g300470m.unf
-> Extracting ad78011000g300470m.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3211     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300470m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad78011000g300470m.drk since it contains 0 events
-> Extracting ad78011000g300470m.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          MEDIUM      2000-06-01  18:33:23    0.56E+03     3211     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300470m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3211      2333              0       878         0         0
 Writing events file
   2333 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3211      2333              0       878         0         0
   in  231.55     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300470m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g300570l.unf
-> Extracting ad78011000g300570l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2042     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300570l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300570l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad78011000g300570l.drk since it contains 0 events
-> Extracting ad78011000g300570l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  04:55:47    0.51E+03     2042     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300570l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           2042      1210              0       832         0         0
 Writing events file
   1210 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2042      1210              0       832         0         0
   in  303.46     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300570l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Extracting bright and dark Earth events from ad78011000g300670l.unf
-> Extracting ad78011000g300670l.drk
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      516     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300670l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300670l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

-> Deleting ad78011000g300670l.drk since it contains 0 events
-> Extracting ad78011000g300670l.brt
-> Standard Output From FTOOL xselect:

 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ARAKELIAN 5 PH          LOW         2000-06-02  08:03:31    0.19E+03      516     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data22/seq_proc/ad0_78011000.001/ad78011000g300670l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
            516       386              0       130         0         0
 Writing events file
    386 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           516       386              0       130         0         0
   in  128.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data22/seq_proc/ad0_78011000.001/
Setting mkf directory to /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA > read events ad78011000g300670l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data22/seq_proc/ad0_78011000.001/
HK Directory is: /data/data22/seq_proc/ad0_78011000.001/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no

Determining information about this observation (17:25:37)

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory

Generating event file information page (17:26:36)

-> Summing time and events for s0 event files
-> listing ad78011000s000102h.unf
-> listing ad78011000s000202m.unf
-> listing ad78011000s000302l.unf
-> listing ad78011000s000112h.unf
-> listing ad78011000s000212m.unf
-> listing ad78011000s000312l.unf
-> listing ad78011000s000101h.unf
-> listing ad78011000s000201m.unf
-> listing ad78011000s000301l.unf
-> Summing time and events for s1 event files
-> listing ad78011000s100102h.unf
-> listing ad78011000s100202m.unf
-> listing ad78011000s100302l.unf
-> listing ad78011000s100112h.unf
-> listing ad78011000s100212m.unf
-> listing ad78011000s100312l.unf
-> listing ad78011000s100101h.unf
-> listing ad78011000s100201m.unf
-> listing ad78011000s100301l.unf
-> Summing time and events for g2 event files
-> listing ad78011000g200170h.unf
-> Standard Output From STOOL get_uniq_keys:

ad78011000g200270m.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad78011000g200470m.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad78011000g200270m.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad78011000g200470m.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad78011000g200270m.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad78011000g200470m.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad78011000g200270m.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad78011000g200470m.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad78011000g200270m.unf|SP_A_U_F|239|Spread discri A_U for FLF method (0-255)
ad78011000g200470m.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad78011000g200270m.unf|SP_B_F|226|Spread discri B for FLF method (0-255)
ad78011000g200470m.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad78011000g200270m.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad78011000g200470m.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad78011000g200270m.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad78011000g200470m.unf|SP_PH_F|31098|Spread discri PH for FLF method (0-1023)

-> listing ad78011000g200270m.unf
-> listing ad78011000g200470m.unf
-> Standard Output From STOOL get_uniq_keys:

ad78011000g200370l.unf|HVH_LVL|3|HV-High level (0 - 7)
ad78011000g200570l.unf|HVH_LVL|3|HV-High level (0 - 7)
ad78011000g200670l.unf|HVH_LVL|0|HV-High level (0 - 7)
ad78011000g200370l.unf|HVL_LVL|4|HV-Low level (0 - 7)
ad78011000g200570l.unf|HVL_LVL|4|HV-Low level (0 - 7)
ad78011000g200670l.unf|HVL_LVL|3|HV-Low level (0 - 7)
ad78011000g200370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad78011000g200570l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad78011000g200670l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad78011000g200370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad78011000g200570l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad78011000g200670l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad78011000g200370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad78011000g200570l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad78011000g200670l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad78011000g200370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad78011000g200570l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad78011000g200670l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad78011000g200370l.unf|SP_A_U_F|239|Spread discri A_U for FLF method (0-255)
ad78011000g200570l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad78011000g200670l.unf|SP_A_U_F|239|Spread discri A_U for FLF method (0-255)
ad78011000g200370l.unf|SP_B_F|226|Spread discri B for FLF method (0-255)
ad78011000g200570l.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad78011000g200670l.unf|SP_B_F|226|Spread discri B for FLF method (0-255)
ad78011000g200370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad78011000g200570l.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad78011000g200670l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad78011000g200370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad78011000g200570l.unf|SP_PH_F|31098|Spread discri PH for FLF method (0-1023)
ad78011000g200670l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)

-> listing ad78011000g200370l.unf
-> listing ad78011000g200570l.unf
-> listing ad78011000g200670l.unf
-> Summing time and events for g3 event files
-> listing ad78011000g300170h.unf
-> Standard Output From STOOL get_uniq_keys:

ad78011000g300270m.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad78011000g300470m.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad78011000g300270m.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad78011000g300470m.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad78011000g300270m.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad78011000g300470m.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad78011000g300270m.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad78011000g300470m.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad78011000g300270m.unf|SP_A_U_F|232|Spread discri A_U for FLF method (0-255)
ad78011000g300470m.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad78011000g300270m.unf|SP_B_F|224|Spread discri B for FLF method (0-255)
ad78011000g300470m.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad78011000g300270m.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad78011000g300470m.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad78011000g300270m.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad78011000g300470m.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)

-> listing ad78011000g300270m.unf
-> listing ad78011000g300470m.unf
-> Standard Output From STOOL get_uniq_keys:

ad78011000g300370l.unf|HVH_LVL|3|HV-High level (0 - 7)
ad78011000g300570l.unf|HVH_LVL|3|HV-High level (0 - 7)
ad78011000g300670l.unf|HVH_LVL|0|HV-High level (0 - 7)
ad78011000g300370l.unf|HVL_LVL|4|HV-Low level (0 - 7)
ad78011000g300570l.unf|HVL_LVL|4|HV-Low level (0 - 7)
ad78011000g300670l.unf|HVL_LVL|3|HV-Low level (0 - 7)
ad78011000g300370l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad78011000g300570l.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255)
ad78011000g300670l.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255)
ad78011000g300370l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad78011000g300570l.unf|SP_B_P|255|Spread discri B for POW2 method (0-255)
ad78011000g300670l.unf|SP_B_P|0|Spread discri B for POW2 method (0-255)
ad78011000g300370l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad78011000g300570l.unf|SP_C_P|255|Spread discri C for POW2 method (0-255)
ad78011000g300670l.unf|SP_C_P|0|Spread discri C for POW2 method (0-255)
ad78011000g300370l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad78011000g300570l.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255)
ad78011000g300670l.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255)
ad78011000g300370l.unf|SP_A_U_F|232|Spread discri A_U for FLF method (0-255)
ad78011000g300570l.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255)
ad78011000g300670l.unf|SP_A_U_F|232|Spread discri A_U for FLF method (0-255)
ad78011000g300370l.unf|SP_B_F|224|Spread discri B for FLF method (0-255)
ad78011000g300570l.unf|SP_B_F|120|Spread discri B for FLF method (0-255)
ad78011000g300670l.unf|SP_B_F|224|Spread discri B for FLF method (0-255)
ad78011000g300370l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad78011000g300570l.unf|SP_C_F|120|Spread discri C for FLF method (0-255)
ad78011000g300670l.unf|SP_C_F|0|Spread discri C for FLF method (0-255)
ad78011000g300370l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)
ad78011000g300570l.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)
ad78011000g300670l.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023)

-> listing ad78011000g300370l.unf
-> listing ad78011000g300570l.unf
-> listing ad78011000g300670l.unf

Creating HTML header page (17:32:6)

Creating HTML source list (17:34:6)

Doing final wrapup of all files (17:35:36)

-> Copying job.par to ad78011000_001_job.par
-> Copying ad0.par to ad78011000_001_process.par
-> Creating ad78011000_tape.cat
-> Creating ad78011000_trend.cat
-> Creating ad78011000_001_file_info.html
-> Calculating site-independant checksums
-> Site independant checksum: 62501
-> Updating FITS checksum keywords
-> Running fverify on all FITS files