Processing Job Log for Sequence 87022000, version 003

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (20:31:21)

Checking input files for validity (20:31:23)

-> Verifying the input files
-> FITS file fa990624_0151.1430 exists
-> FITS file ft990624_0151.1430 exists
-> FITS file ad87022000_input.cat exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 2.0434270E+08 = 1999-06-24 01:51:36
-> Observation ends 2.0438826E+08 = 1999-06-24 14:30:56

Determine nominal pointing (20:31:29)

-> Checking fa990624_0151.1430 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect
Spacecraft Euler Angles: Phi=-171.68550 Theta=76.27951 Psi=155.36712
Telescope pointing: R.A.=188.02235 Dec=13.70478 Roll=65.43637 degrees
-> Nominal spacecraft Euler angles: Phi=-171.68550036056 Theta=76.279506567004 Psi=155.36711830303
-> Nominal telescope pointing: R.A.=188.02235099696 Dec=13.704776309343 Roll Angle=65.436372978244
-> Galactic Coordinates: Lii=283.371395 Bii=75.836478

Running frfread on telemetry files (20:31:40)

-> Running frfread on ft990624_0151.1430
-> stdout output from frfread4
Dropping SF 8 with inconsistent datamode 0/31
Dropping SF 223 with inconsistent datamode 0/31
601.998 second gap between superframes 460 and 461
GIS2 coordinate error time=204357270.81173 x=24 y=0 pha=0 rise=0
SIS1 coordinate error time=204357286.86144 x=0 y=0 pha[0]=768 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=204357286.86144
SIS0 coordinate error time=204357514.86067 x=0 y=12 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=1 time=204357514.86067
Dropping SF 2259 with synch code word 0 = 154 not 250
SIS1 coordinate error time=204357518.86065 x=256 y=0 pha[0]=0 chip=1
FAINT event CCD=1, but using exposure CCD=3 time=204357518.86065
Dropping SF 2262 with synch code word 0 = 252 not 250
663.998 second gap between superframes 2389 and 2390
Dropping SF 3641 with corrupted frame indicator
Dropping SF 4043 with synch code word 1 = 51 not 243
Dropping SF 4044 with synch code word 0 = 246 not 250
Dropping SF 4045 with synch code word 0 = 58 not 250
Dropping SF 4046 with corrupted frame indicator
Dropping SF 4047 with synch code word 0 = 251 not 250
GIS2 coordinate error time=204363315.17775 x=0 y=0 pha=12 rise=0
SIS1 coordinate error time=204363306.84083 x=0 y=3 pha[0]=0 chip=0
SIS1 peak error time=204363306.84083 x=0 y=3 ph0=0 ph4=704
FAINT event CCD=0, but using exposure CCD=3 time=204363306.84083
Dropping SF 4049 with synch code word 0 = 122 not 250
Dropping SF 4050 with synch code word 0 = 202 not 250
Dropping SF 4051 with synch code word 1 = 51 not 243
SIS1 coordinate error time=204363314.84081 x=1 y=256 pha[0]=0 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=204363314.84081
GIS2 coordinate error time=204363648.24301 x=0 y=0 pha=6 rise=0
631.998 second gap between superframes 4306 and 4307
Dropping SF 4474 with inconsistent datamode 0/31
Dropping SF 5738 with corrupted frame indicator
663.998 second gap between superframes 6206 and 6207
57.9998 second gap between superframes 8229 and 8230
Dropping SF 8567 with inconsistent datamode 0/31
GIS3 coordinate error time=204386458.64932 x=0 y=0 pha=640 rise=0
Dropping SF 8569 with inconsistent datamode 0/31
9419 of 9436 super frames processed
-> 0% of superframes in ft990624_0151.1430 corrupted
-> Deleting the following files with NEVENTS=0
ft990624_0151_1430G202470L.fits
ft990624_0151_1430G202570H.fits
ft990624_0151_1430G203170L.fits
ft990624_0151_1430G203270M.fits
ft990624_0151_1430G203370M.fits
ft990624_0151_1430G203470M.fits
ft990624_0151_1430G203570M.fits
ft990624_0151_1430G203870H.fits
ft990624_0151_1430G204770L.fits
ft990624_0151_1430G204870M.fits
ft990624_0151_1430G204970M.fits
ft990624_0151_1430G205070M.fits
ft990624_0151_1430G205170M.fits
ft990624_0151_1430G205670H.fits
ft990624_0151_1430G206170L.fits
ft990624_0151_1430G206270M.fits
ft990624_0151_1430G206370M.fits
ft990624_0151_1430G206470M.fits
ft990624_0151_1430G206570M.fits
ft990624_0151_1430G206670H.fits
ft990624_0151_1430G206770H.fits
ft990624_0151_1430G206870H.fits
ft990624_0151_1430G206970H.fits
ft990624_0151_1430G301870L.fits
ft990624_0151_1430G301970H.fits
ft990624_0151_1430G302070H.fits
ft990624_0151_1430G302570L.fits
ft990624_0151_1430G302670M.fits
ft990624_0151_1430G302770M.fits
ft990624_0151_1430G302870M.fits
ft990624_0151_1430G302970M.fits
ft990624_0151_1430G304170L.fits
ft990624_0151_1430G304270M.fits
ft990624_0151_1430G304370M.fits
ft990624_0151_1430G304470M.fits
ft990624_0151_1430G304570M.fits
ft990624_0151_1430G305570L.fits
ft990624_0151_1430G305670M.fits
ft990624_0151_1430G305770M.fits
ft990624_0151_1430G305870M.fits
ft990624_0151_1430G305970M.fits
ft990624_0151_1430G306070H.fits
ft990624_0151_1430G306170H.fits
ft990624_0151_1430G306270H.fits
ft990624_0151_1430G306370H.fits
ft990624_0151_1430G306470H.fits
-> merging GTIs for s0 990624_0151.1430
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990624_0151_1430S0HK.fits
-> Total ONTIME for s0 990624_0151.1430 = 42131.9
-> merging GTIs for s1 990624_0151.1430
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990624_0151_1430S1HK.fits
-> Total ONTIME for s1 990624_0151.1430 = 42143.9
-> merging GTIs for g2 990624_0151.1430
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990624_0151_1430G2HK.fits
-> Total ONTIME for g2 990624_0151.1430 = 35527.9
-> merging GTIs for g3 990624_0151.1430
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990624_0151_1430G3HK.fits
-> Total ONTIME for g3 990624_0151.1430 = 35523.9

Merging event files from frfread (20:37:36)

-> Grouping s0 event files
-> stdout output from group_event_files
1 ft990624_0151_1430S000401H.fits 108571
1 ft990624_0151_1430S000601H.fits 108571
1 ft990624_0151_1430S000701H.fits 108571
1 ft990624_0151_1430S000801H.fits 108571
1 ft990624_0151_1430S000901H.fits 108571
1 ft990624_0151_1430S001001H.fits 108571
1 ft990624_0151_1430S001201H.fits 108571
1 ft990624_0151_1430S001401H.fits 108571
1 ft990624_0151_1430S001901H.fits 108571
1 ft990624_0151_1430S002501H.fits 108571
1 ft990624_0151_1430S003101H.fits 108571
2 ft990624_0151_1430S000101M.fits 23767
2 ft990624_0151_1430S000301M.fits 23767
2 ft990624_0151_1430S001801M.fits 23767
2 ft990624_0151_1430S002001M.fits 23767
2 ft990624_0151_1430S002401M.fits 23767
2 ft990624_0151_1430S002601M.fits 23767
2 ft990624_0151_1430S003001M.fits 23767
2 ft990624_0151_1430S003201M.fits 23767
3 ft990624_0151_1430S000201L.fits 23164
3 ft990624_0151_1430S000501L.fits 23164
3 ft990624_0151_1430S001101L.fits 23164
3 ft990624_0151_1430S001301L.fits 23164
3 ft990624_0151_1430S001501L.fits 23164
3 ft990624_0151_1430S001701L.fits 23164
3 ft990624_0151_1430S002101L.fits 23164
3 ft990624_0151_1430S002301L.fits 23164
3 ft990624_0151_1430S002701L.fits 23164
3 ft990624_0151_1430S002901L.fits 23164
4 ft990624_0151_1430S001601L.fits 125
4 ft990624_0151_1430S002201L.fits 125
4 ft990624_0151_1430S002801L.fits 125
-> Creating ad87022000s000101h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  11  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 11 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430S000401H.fits 
 2 -- ft990624_0151_1430S000601H.fits 
 3 -- ft990624_0151_1430S000701H.fits 
 4 -- ft990624_0151_1430S000801H.fits 
 5 -- ft990624_0151_1430S000901H.fits 
 6 -- ft990624_0151_1430S001001H.fits 
 7 -- ft990624_0151_1430S001201H.fits 
 8 -- ft990624_0151_1430S001401H.fits 
 9 -- ft990624_0151_1430S001901H.fits 
 10 -- ft990624_0151_1430S002501H.fits 
 11 -- ft990624_0151_1430S003101H.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430S000401H.fits 
 2 -- ft990624_0151_1430S000601H.fits 
 3 -- ft990624_0151_1430S000701H.fits 
 4 -- ft990624_0151_1430S000801H.fits 
 5 -- ft990624_0151_1430S000901H.fits 
 6 -- ft990624_0151_1430S001001H.fits 
 7 -- ft990624_0151_1430S001201H.fits 
 8 -- ft990624_0151_1430S001401H.fits 
 9 -- ft990624_0151_1430S001901H.fits 
 10 -- ft990624_0151_1430S002501H.fits 
 11 -- ft990624_0151_1430S003101H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000s000201m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 8 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430S000101M.fits 
 2 -- ft990624_0151_1430S000301M.fits 
 3 -- ft990624_0151_1430S001801M.fits 
 4 -- ft990624_0151_1430S002001M.fits 
 5 -- ft990624_0151_1430S002401M.fits 
 6 -- ft990624_0151_1430S002601M.fits 
 7 -- ft990624_0151_1430S003001M.fits 
 8 -- ft990624_0151_1430S003201M.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430S000101M.fits 
 2 -- ft990624_0151_1430S000301M.fits 
 3 -- ft990624_0151_1430S001801M.fits 
 4 -- ft990624_0151_1430S002001M.fits 
 5 -- ft990624_0151_1430S002401M.fits 
 6 -- ft990624_0151_1430S002601M.fits 
 7 -- ft990624_0151_1430S003001M.fits 
 8 -- ft990624_0151_1430S003201M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000s000301l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  10  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 10 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430S000201L.fits 
 2 -- ft990624_0151_1430S000501L.fits 
 3 -- ft990624_0151_1430S001101L.fits 
 4 -- ft990624_0151_1430S001301L.fits 
 5 -- ft990624_0151_1430S001501L.fits 
 6 -- ft990624_0151_1430S001701L.fits 
 7 -- ft990624_0151_1430S002101L.fits 
 8 -- ft990624_0151_1430S002301L.fits 
 9 -- ft990624_0151_1430S002701L.fits 
 10 -- ft990624_0151_1430S002901L.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430S000201L.fits 
 2 -- ft990624_0151_1430S000501L.fits 
 3 -- ft990624_0151_1430S001101L.fits 
 4 -- ft990624_0151_1430S001301L.fits 
 5 -- ft990624_0151_1430S001501L.fits 
 6 -- ft990624_0151_1430S001701L.fits 
 7 -- ft990624_0151_1430S002101L.fits 
 8 -- ft990624_0151_1430S002301L.fits 
 9 -- ft990624_0151_1430S002701L.fits 
 10 -- ft990624_0151_1430S002901L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 125 events ft990624_0151_1430S001601L.fits ft990624_0151_1430S002201L.fits ft990624_0151_1430S002801L.fits
-> Grouping s1 event files
-> stdout output from group_event_files
1 ft990624_0151_1430S100401H.fits 82079
1 ft990624_0151_1430S100601H.fits 82079
1 ft990624_0151_1430S100801H.fits 82079
1 ft990624_0151_1430S101001H.fits 82079
1 ft990624_0151_1430S101501H.fits 82079
1 ft990624_0151_1430S102101H.fits 82079
1 ft990624_0151_1430S102701H.fits 82079
2 ft990624_0151_1430S100101M.fits 26786
2 ft990624_0151_1430S100301M.fits 26786
2 ft990624_0151_1430S101401M.fits 26786
2 ft990624_0151_1430S101601M.fits 26786
2 ft990624_0151_1430S102001M.fits 26786
2 ft990624_0151_1430S102201M.fits 26786
2 ft990624_0151_1430S102601M.fits 26786
2 ft990624_0151_1430S102801M.fits 26786
3 ft990624_0151_1430S100201L.fits 23283
3 ft990624_0151_1430S100501L.fits 23283
3 ft990624_0151_1430S100701L.fits 23283
3 ft990624_0151_1430S100901L.fits 23283
3 ft990624_0151_1430S101101L.fits 23283
3 ft990624_0151_1430S101301L.fits 23283
3 ft990624_0151_1430S101701L.fits 23283
3 ft990624_0151_1430S101901L.fits 23283
3 ft990624_0151_1430S102301L.fits 23283
3 ft990624_0151_1430S102501L.fits 23283
4 ft990624_0151_1430S101201L.fits 142
4 ft990624_0151_1430S101801L.fits 142
4 ft990624_0151_1430S102401L.fits 142
-> Creating ad87022000s100101h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430S100401H.fits 
 2 -- ft990624_0151_1430S100601H.fits 
 3 -- ft990624_0151_1430S100801H.fits 
 4 -- ft990624_0151_1430S101001H.fits 
 5 -- ft990624_0151_1430S101501H.fits 
 6 -- ft990624_0151_1430S102101H.fits 
 7 -- ft990624_0151_1430S102701H.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430S100401H.fits 
 2 -- ft990624_0151_1430S100601H.fits 
 3 -- ft990624_0151_1430S100801H.fits 
 4 -- ft990624_0151_1430S101001H.fits 
 5 -- ft990624_0151_1430S101501H.fits 
 6 -- ft990624_0151_1430S102101H.fits 
 7 -- ft990624_0151_1430S102701H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000s100201m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  8  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 8 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430S100101M.fits 
 2 -- ft990624_0151_1430S100301M.fits 
 3 -- ft990624_0151_1430S101401M.fits 
 4 -- ft990624_0151_1430S101601M.fits 
 5 -- ft990624_0151_1430S102001M.fits 
 6 -- ft990624_0151_1430S102201M.fits 
 7 -- ft990624_0151_1430S102601M.fits 
 8 -- ft990624_0151_1430S102801M.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430S100101M.fits 
 2 -- ft990624_0151_1430S100301M.fits 
 3 -- ft990624_0151_1430S101401M.fits 
 4 -- ft990624_0151_1430S101601M.fits 
 5 -- ft990624_0151_1430S102001M.fits 
 6 -- ft990624_0151_1430S102201M.fits 
 7 -- ft990624_0151_1430S102601M.fits 
 8 -- ft990624_0151_1430S102801M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000s100301l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  10  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 10 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430S100201L.fits 
 2 -- ft990624_0151_1430S100501L.fits 
 3 -- ft990624_0151_1430S100701L.fits 
 4 -- ft990624_0151_1430S100901L.fits 
 5 -- ft990624_0151_1430S101101L.fits 
 6 -- ft990624_0151_1430S101301L.fits 
 7 -- ft990624_0151_1430S101701L.fits 
 8 -- ft990624_0151_1430S101901L.fits 
 9 -- ft990624_0151_1430S102301L.fits 
 10 -- ft990624_0151_1430S102501L.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430S100201L.fits 
 2 -- ft990624_0151_1430S100501L.fits 
 3 -- ft990624_0151_1430S100701L.fits 
 4 -- ft990624_0151_1430S100901L.fits 
 5 -- ft990624_0151_1430S101101L.fits 
 6 -- ft990624_0151_1430S101301L.fits 
 7 -- ft990624_0151_1430S101701L.fits 
 8 -- ft990624_0151_1430S101901L.fits 
 9 -- ft990624_0151_1430S102301L.fits 
 10 -- ft990624_0151_1430S102501L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 142 events ft990624_0151_1430S101201L.fits ft990624_0151_1430S101801L.fits ft990624_0151_1430S102401L.fits
-> Grouping g2 event files
-> stdout output from group_event_files
1 ft990624_0151_1430G200870H.fits 29197
1 ft990624_0151_1430G201470H.fits 29197
1 ft990624_0151_1430G201670H.fits 29197
1 ft990624_0151_1430G201870H.fits 29197
1 ft990624_0151_1430G202070H.fits 29197
1 ft990624_0151_1430G202270H.fits 29197
1 ft990624_0151_1430G202970H.fits 29197
1 ft990624_0151_1430G204170H.fits 29197
1 ft990624_0151_1430G205770H.fits 29197
1 ft990624_0151_1430G207370H.fits 29197
1 ft990624_0151_1430G207470H.fits 29197
1 ft990624_0151_1430G207570H.fits 29197
2 ft990624_0151_1430G200370L.fits 23719
2 ft990624_0151_1430G201070L.fits 23719
2 ft990624_0151_1430G201770L.fits 23719
2 ft990624_0151_1430G202370L.fits 23719
2 ft990624_0151_1430G203070L.fits 23719
2 ft990624_0151_1430G204570L.fits 23719
2 ft990624_0151_1430G206070L.fits 23719
3 ft990624_0151_1430G200170M.fits 17154
3 ft990624_0151_1430G200770M.fits 17154
3 ft990624_0151_1430G203770M.fits 17154
3 ft990624_0151_1430G204370M.fits 17154
3 ft990624_0151_1430G205370M.fits 17154
3 ft990624_0151_1430G205970M.fits 17154
4 ft990624_0151_1430G200670M.fits 360
4 ft990624_0151_1430G204270M.fits 360
4 ft990624_0151_1430G205870M.fits 360
4 ft990624_0151_1430G207670M.fits 360
5 ft990624_0151_1430G200270L.fits 216
5 ft990624_0151_1430G200970L.fits 216
5 ft990624_0151_1430G204470L.fits 216
6 ft990624_0151_1430G200470M.fits 47
7 ft990624_0151_1430G204670L.fits 32
8 ft990624_0151_1430G200570M.fits 30
9 ft990624_0151_1430G203670M.fits 22
9 ft990624_0151_1430G205270M.fits 22
10 ft990624_0151_1430G201370H.fits 20
10 ft990624_0151_1430G204070H.fits 20
11 ft990624_0151_1430G201270H.fits 18
12 ft990624_0151_1430G201170H.fits 17
13 ft990624_0151_1430G202770H.fits 5
13 ft990624_0151_1430G207170H.fits 5
14 ft990624_0151_1430G202870H.fits 5
14 ft990624_0151_1430G207270H.fits 5
15 ft990624_0151_1430G203970H.fits 5
16 ft990624_0151_1430G201570H.fits 4
17 ft990624_0151_1430G205570H.fits 4
18 ft990624_0151_1430G201970H.fits 3
19 ft990624_0151_1430G202170H.fits 2
20 ft990624_0151_1430G202670H.fits 2
20 ft990624_0151_1430G207070H.fits 2
21 ft990624_0151_1430G205470H.fits 2
-> Creating ad87022000g200170h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  12  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 12 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430G200870H.fits 
 2 -- ft990624_0151_1430G201470H.fits 
 3 -- ft990624_0151_1430G201670H.fits 
 4 -- ft990624_0151_1430G201870H.fits 
 5 -- ft990624_0151_1430G202070H.fits 
 6 -- ft990624_0151_1430G202270H.fits 
 7 -- ft990624_0151_1430G202970H.fits 
 8 -- ft990624_0151_1430G204170H.fits 
 9 -- ft990624_0151_1430G205770H.fits 
 10 -- ft990624_0151_1430G207370H.fits 
 11 -- ft990624_0151_1430G207470H.fits 
 12 -- ft990624_0151_1430G207570H.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430G200870H.fits 
 2 -- ft990624_0151_1430G201470H.fits 
 3 -- ft990624_0151_1430G201670H.fits 
 4 -- ft990624_0151_1430G201870H.fits 
 5 -- ft990624_0151_1430G202070H.fits 
 6 -- ft990624_0151_1430G202270H.fits 
 7 -- ft990624_0151_1430G202970H.fits 
 8 -- ft990624_0151_1430G204170H.fits 
 9 -- ft990624_0151_1430G205770H.fits 
 10 -- ft990624_0151_1430G207370H.fits 
 11 -- ft990624_0151_1430G207470H.fits 
 12 -- ft990624_0151_1430G207570H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000g200270l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430G200370L.fits 
 2 -- ft990624_0151_1430G201070L.fits 
 3 -- ft990624_0151_1430G201770L.fits 
 4 -- ft990624_0151_1430G202370L.fits 
 5 -- ft990624_0151_1430G203070L.fits 
 6 -- ft990624_0151_1430G204570L.fits 
 7 -- ft990624_0151_1430G206070L.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430G200370L.fits 
 2 -- ft990624_0151_1430G201070L.fits 
 3 -- ft990624_0151_1430G201770L.fits 
 4 -- ft990624_0151_1430G202370L.fits 
 5 -- ft990624_0151_1430G203070L.fits 
 6 -- ft990624_0151_1430G204570L.fits 
 7 -- ft990624_0151_1430G206070L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000g200370m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430G200170M.fits 
 2 -- ft990624_0151_1430G200770M.fits 
 3 -- ft990624_0151_1430G203770M.fits 
 4 -- ft990624_0151_1430G204370M.fits 
 5 -- ft990624_0151_1430G205370M.fits 
 6 -- ft990624_0151_1430G205970M.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430G200170M.fits 
 2 -- ft990624_0151_1430G200770M.fits 
 3 -- ft990624_0151_1430G203770M.fits 
 4 -- ft990624_0151_1430G204370M.fits 
 5 -- ft990624_0151_1430G205370M.fits 
 6 -- ft990624_0151_1430G205970M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 360 events ft990624_0151_1430G200670M.fits ft990624_0151_1430G204270M.fits ft990624_0151_1430G205870M.fits ft990624_0151_1430G207670M.fits
-> Ignoring the following files containing 216 events ft990624_0151_1430G200270L.fits ft990624_0151_1430G200970L.fits ft990624_0151_1430G204470L.fits
-> Ignoring the following files containing 47 events ft990624_0151_1430G200470M.fits
-> Ignoring the following files containing 32 events ft990624_0151_1430G204670L.fits
-> Ignoring the following files containing 30 events ft990624_0151_1430G200570M.fits
-> Ignoring the following files containing 22 events ft990624_0151_1430G203670M.fits ft990624_0151_1430G205270M.fits
-> Ignoring the following files containing 20 events ft990624_0151_1430G201370H.fits ft990624_0151_1430G204070H.fits
-> Ignoring the following files containing 18 events ft990624_0151_1430G201270H.fits
-> Ignoring the following files containing 17 events ft990624_0151_1430G201170H.fits
-> Ignoring the following files containing 5 events ft990624_0151_1430G202770H.fits ft990624_0151_1430G207170H.fits
-> Ignoring the following files containing 5 events ft990624_0151_1430G202870H.fits ft990624_0151_1430G207270H.fits
-> Ignoring the following files containing 5 events ft990624_0151_1430G203970H.fits
-> Ignoring the following files containing 4 events ft990624_0151_1430G201570H.fits
-> Ignoring the following files containing 4 events ft990624_0151_1430G205570H.fits
-> Ignoring the following files containing 3 events ft990624_0151_1430G201970H.fits
-> Ignoring the following files containing 2 events ft990624_0151_1430G202170H.fits
-> Ignoring the following files containing 2 events ft990624_0151_1430G202670H.fits ft990624_0151_1430G207070H.fits
-> Ignoring the following files containing 2 events ft990624_0151_1430G205470H.fits
-> Grouping g3 event files
-> stdout output from group_event_files
1 ft990624_0151_1430G300870H.fits 27568
1 ft990624_0151_1430G301470H.fits 27568
1 ft990624_0151_1430G301670H.fits 27568
1 ft990624_0151_1430G302370H.fits 27568
1 ft990624_0151_1430G303570H.fits 27568
1 ft990624_0151_1430G305170H.fits 27568
1 ft990624_0151_1430G306770H.fits 27568
1 ft990624_0151_1430G306870H.fits 27568
1 ft990624_0151_1430G306970H.fits 27568
2 ft990624_0151_1430G300370L.fits 23780
2 ft990624_0151_1430G301070L.fits 23780
2 ft990624_0151_1430G301570L.fits 23780
2 ft990624_0151_1430G301770L.fits 23780
2 ft990624_0151_1430G302470L.fits 23780
2 ft990624_0151_1430G303970L.fits 23780
2 ft990624_0151_1430G305470L.fits 23780
3 ft990624_0151_1430G300170M.fits 16210
3 ft990624_0151_1430G300770M.fits 16210
3 ft990624_0151_1430G303170M.fits 16210
3 ft990624_0151_1430G303770M.fits 16210
3 ft990624_0151_1430G304770M.fits 16210
3 ft990624_0151_1430G305370M.fits 16210
4 ft990624_0151_1430G300670M.fits 385
4 ft990624_0151_1430G303670M.fits 385
4 ft990624_0151_1430G305270M.fits 385
4 ft990624_0151_1430G307070M.fits 385
5 ft990624_0151_1430G300270L.fits 216
5 ft990624_0151_1430G300970L.fits 216
5 ft990624_0151_1430G303870L.fits 216
6 ft990624_0151_1430G300470M.fits 46
7 ft990624_0151_1430G300570M.fits 31
8 ft990624_0151_1430G304070L.fits 31
9 ft990624_0151_1430G301270H.fits 21
10 ft990624_0151_1430G301370H.fits 18
10 ft990624_0151_1430G303470H.fits 18
10 ft990624_0151_1430G305070H.fits 18
11 ft990624_0151_1430G301170H.fits 13
12 ft990624_0151_1430G303070M.fits 11
12 ft990624_0151_1430G304670M.fits 11
13 ft990624_0151_1430G302170H.fits 4
13 ft990624_0151_1430G306570H.fits 4
14 ft990624_0151_1430G302270H.fits 3
14 ft990624_0151_1430G306670H.fits 3
15 ft990624_0151_1430G303270H.fits 2
16 ft990624_0151_1430G303370H.fits 1
17 ft990624_0151_1430G304870H.fits 1
18 ft990624_0151_1430G304970H.fits 1
-> Creating ad87022000g300170h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  9  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 9 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430G300870H.fits 
 2 -- ft990624_0151_1430G301470H.fits 
 3 -- ft990624_0151_1430G301670H.fits 
 4 -- ft990624_0151_1430G302370H.fits 
 5 -- ft990624_0151_1430G303570H.fits 
 6 -- ft990624_0151_1430G305170H.fits 
 7 -- ft990624_0151_1430G306770H.fits 
 8 -- ft990624_0151_1430G306870H.fits 
 9 -- ft990624_0151_1430G306970H.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430G300870H.fits 
 2 -- ft990624_0151_1430G301470H.fits 
 3 -- ft990624_0151_1430G301670H.fits 
 4 -- ft990624_0151_1430G302370H.fits 
 5 -- ft990624_0151_1430G303570H.fits 
 6 -- ft990624_0151_1430G305170H.fits 
 7 -- ft990624_0151_1430G306770H.fits 
 8 -- ft990624_0151_1430G306870H.fits 
 9 -- ft990624_0151_1430G306970H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000g300270l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430G300370L.fits 
 2 -- ft990624_0151_1430G301070L.fits 
 3 -- ft990624_0151_1430G301570L.fits 
 4 -- ft990624_0151_1430G301770L.fits 
 5 -- ft990624_0151_1430G302470L.fits 
 6 -- ft990624_0151_1430G303970L.fits 
 7 -- ft990624_0151_1430G305470L.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430G300370L.fits 
 2 -- ft990624_0151_1430G301070L.fits 
 3 -- ft990624_0151_1430G301570L.fits 
 4 -- ft990624_0151_1430G301770L.fits 
 5 -- ft990624_0151_1430G302470L.fits 
 6 -- ft990624_0151_1430G303970L.fits 
 7 -- ft990624_0151_1430G305470L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87022000g300370m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990624_0151_1430G300170M.fits 
 2 -- ft990624_0151_1430G300770M.fits 
 3 -- ft990624_0151_1430G303170M.fits 
 4 -- ft990624_0151_1430G303770M.fits 
 5 -- ft990624_0151_1430G304770M.fits 
 6 -- ft990624_0151_1430G305370M.fits 
Merging binary extension #: 2 
 1 -- ft990624_0151_1430G300170M.fits 
 2 -- ft990624_0151_1430G300770M.fits 
 3 -- ft990624_0151_1430G303170M.fits 
 4 -- ft990624_0151_1430G303770M.fits 
 5 -- ft990624_0151_1430G304770M.fits 
 6 -- ft990624_0151_1430G305370M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 385 events ft990624_0151_1430G300670M.fits ft990624_0151_1430G303670M.fits ft990624_0151_1430G305270M.fits ft990624_0151_1430G307070M.fits
-> Ignoring the following files containing 216 events ft990624_0151_1430G300270L.fits ft990624_0151_1430G300970L.fits ft990624_0151_1430G303870L.fits
-> Ignoring the following files containing 46 events ft990624_0151_1430G300470M.fits
-> Ignoring the following files containing 31 events ft990624_0151_1430G300570M.fits
-> Ignoring the following files containing 31 events ft990624_0151_1430G304070L.fits
-> Ignoring the following files containing 21 events ft990624_0151_1430G301270H.fits
-> Ignoring the following files containing 18 events ft990624_0151_1430G301370H.fits ft990624_0151_1430G303470H.fits ft990624_0151_1430G305070H.fits
-> Ignoring the following files containing 13 events ft990624_0151_1430G301170H.fits
-> Ignoring the following files containing 11 events ft990624_0151_1430G303070M.fits ft990624_0151_1430G304670M.fits
-> Ignoring the following files containing 4 events ft990624_0151_1430G302170H.fits ft990624_0151_1430G306570H.fits
-> Ignoring the following files containing 3 events ft990624_0151_1430G302270H.fits ft990624_0151_1430G306670H.fits
-> Ignoring the following files containing 2 events ft990624_0151_1430G303270H.fits
-> Ignoring the following files containing 1 events ft990624_0151_1430G303370H.fits
-> Ignoring the following files containing 1 events ft990624_0151_1430G304870H.fits
-> Ignoring the following files containing 1 events ft990624_0151_1430G304970H.fits
-> stdout output from tar
a ft990624_0151_1430G200270L.fits 31K
a ft990624_0151_1430G200470M.fits 31K
a ft990624_0151_1430G200570M.fits 31K
a ft990624_0151_1430G200670M.fits 31K
a ft990624_0151_1430G200970L.fits 31K
a ft990624_0151_1430G201170H.fits 31K
a ft990624_0151_1430G201270H.fits 31K
a ft990624_0151_1430G201370H.fits 31K
a ft990624_0151_1430G201570H.fits 31K
a ft990624_0151_1430G201970H.fits 31K
a ft990624_0151_1430G202170H.fits 31K
a ft990624_0151_1430G202670H.fits 31K
a ft990624_0151_1430G202770H.fits 31K
a ft990624_0151_1430G202870H.fits 31K
a ft990624_0151_1430G203670M.fits 31K
a ft990624_0151_1430G203970H.fits 31K
a ft990624_0151_1430G204070H.fits 31K
a ft990624_0151_1430G204270M.fits 31K
a ft990624_0151_1430G204470L.fits 31K
a ft990624_0151_1430G204670L.fits 31K
a ft990624_0151_1430G205270M.fits 31K
a ft990624_0151_1430G205470H.fits 31K
a ft990624_0151_1430G205570H.fits 31K
a ft990624_0151_1430G205870M.fits 31K
a ft990624_0151_1430G207070H.fits 31K
a ft990624_0151_1430G207170H.fits 31K
a ft990624_0151_1430G207270H.fits 31K
a ft990624_0151_1430G207670M.fits 37K
a ft990624_0151_1430G300270L.fits 31K
a ft990624_0151_1430G300470M.fits 31K
a ft990624_0151_1430G300570M.fits 31K
a ft990624_0151_1430G300670M.fits 31K
a ft990624_0151_1430G300970L.fits 31K
a ft990624_0151_1430G301170H.fits 31K
a ft990624_0151_1430G301270H.fits 31K
a ft990624_0151_1430G301370H.fits 31K
a ft990624_0151_1430G302170H.fits 31K
a ft990624_0151_1430G302270H.fits 31K
a ft990624_0151_1430G303070M.fits 31K
a ft990624_0151_1430G303270H.fits 31K
a ft990624_0151_1430G303370H.fits 31K
a ft990624_0151_1430G303470H.fits 31K
a ft990624_0151_1430G303670M.fits 31K
a ft990624_0151_1430G303870L.fits 34K
a ft990624_0151_1430G304070L.fits 31K
a ft990624_0151_1430G304670M.fits 31K
a ft990624_0151_1430G304870H.fits 31K
a ft990624_0151_1430G304970H.fits 31K
a ft990624_0151_1430G305070H.fits 31K
a ft990624_0151_1430G305270M.fits 31K
a ft990624_0151_1430G306570H.fits 31K
a ft990624_0151_1430G306670H.fits 31K
a ft990624_0151_1430G307070M.fits 40K
a ft990624_0151_1430S001601L.fits 29K
a ft990624_0151_1430S002201L.fits 29K
a ft990624_0151_1430S002801L.fits 31K
a ft990624_0151_1430S101201L.fits 29K
a ft990624_0151_1430S101801L.fits 29K
a ft990624_0151_1430S102401L.fits 31K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (20:39:20)

-> Split threshold for SIS0=40, and SIS1=40
-> Fetching faintdfe.tbl
-> Calculating DFE values for ad87022000s000101h.unf with zerodef=1
-> Converting ad87022000s000101h.unf to ad87022000s000112h.unf
-> Calculating DFE values for ad87022000s000101h.unf with zerodef=2
-> Converting ad87022000s000101h.unf to ad87022000s000102h.unf
-> Calculating DFE values for ad87022000s000201m.unf with zerodef=1
-> Converting ad87022000s000201m.unf to ad87022000s000212m.unf
-> Calculating DFE values for ad87022000s000201m.unf with zerodef=2
-> Converting ad87022000s000201m.unf to ad87022000s000202m.unf
-> Calculating DFE values for ad87022000s000301l.unf with zerodef=1
-> Converting ad87022000s000301l.unf to ad87022000s000312l.unf
-> Calculating DFE values for ad87022000s000301l.unf with zerodef=2
-> Converting ad87022000s000301l.unf to ad87022000s000302l.unf
-> Calculating DFE values for ad87022000s100101h.unf with zerodef=1
-> Converting ad87022000s100101h.unf to ad87022000s100112h.unf
-> Calculating DFE values for ad87022000s100101h.unf with zerodef=2
-> Converting ad87022000s100101h.unf to ad87022000s100102h.unf
-> Calculating DFE values for ad87022000s100201m.unf with zerodef=1
-> Converting ad87022000s100201m.unf to ad87022000s100212m.unf
-> Calculating DFE values for ad87022000s100201m.unf with zerodef=2
-> Converting ad87022000s100201m.unf to ad87022000s100202m.unf
-> Calculating DFE values for ad87022000s100301l.unf with zerodef=1
-> Converting ad87022000s100301l.unf to ad87022000s100312l.unf
-> Calculating DFE values for ad87022000s100301l.unf with zerodef=2
-> Converting ad87022000s100301l.unf to ad87022000s100302l.unf

Calibrating the unfiltered event files (20:42:58)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft990624_0151_1430.ghf
-> stdout output from temp2gain
temp2gain V4.6
leapsec FITS data was successfully read

'ft990624_0151.1430' is successfully opened
Data Start Time is 204342703.04 (19990624 015139)
Time Margin 2.0 sec included
Sync error detected in 2256 th SF
Sync error detected in 2259 th SF
Sync error detected in 4039 th SF
Sync error detected in 4040 th SF
Sync error detected in 4042 th SF
Sync error detected in 4043 th SF
Sync error detected in 4044 th SF
'ft990624_0151.1430' EOF detected, sf=9436
Data End Time is 204388258.88 (19990624 143054)
Gain History is written in ft990624_0151_1430.ghf
-> Generating attitude correction table ad87022000_003_bp4.txt
-> Extracting info from ft990624_0151_1430CMHK.fits
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad87022000g200170h.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad87022000g200170h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87022000g200270l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87022000g200270l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87022000g200370m.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87022000g200370m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87022000g300170h.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad87022000g300170h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87022000g300270l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87022000g300270l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87022000g300370m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87022000g300370m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87022000s000101h.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad87022000s000101h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000102h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000102h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000112h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000112h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000201m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000201m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000202m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000202m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000212m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000212m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000301l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000301l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000302l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000302l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s000312l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s000312l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100101h.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100101h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100102h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100102h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100112h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100112h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100201m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100201m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100202m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100202m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100212m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100212m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100301l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100301l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100302l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100302l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87022000s100312l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87022000s100312l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

Creating filter files (20:49:9)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.255 to working directory
-> Creating ft990624_0151_1430.mkf
-> stdout output from mkfilter2
 
leapsec FITS data was successfully read

S0-HK file: ft990624_0151_1430S0HK.fits

S1-HK file: ft990624_0151_1430S1HK.fits

G2-HK file: ft990624_0151_1430G2HK.fits

G3-HK file: ft990624_0151_1430G3HK.fits

Date and time are: 1999-06-24 01:50:41  mjd=51353.076864

Orbit file name is frf.orbit.255

Epoch of Orbital Elements: 1999-06-21 21:59:59

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa990624_0151.1430

output FITS File: ft990624_0151_1430.mkf

mkfilter2: Warning, faQparam error: time= 2.043426570362e+08 outside range of attitude file

           Euler angles undefined for this bin

Total 1426 Data bins were processed.
-> Adding deadtime to ft990624_0151_1430.mkf
-> Adding ad87022000_s0.dfe to ft990624_0151_1430.mkf
-> Adding ad87022000_s1.dfe to ft990624_0151_1430.mkf
-> Plotting quantities from ft990624_0151_1430.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (21:5:19)

-> Skipping ad87022000s000101h.unf because of mode
-> Filtering ad87022000s000102h.unf into ad87022000s000102h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   5938.5826
 The mean of the selected column is                  19.470763
 The standard deviation of the selected column is    8.5012183
 The minimum of selected column is                   1.3401248
 The maximum of selected column is                   53.812687
 The number of points used in calculation is              305
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.9 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:48    0.17E+05    13823 0100
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          12991      7023              0      5968         0         0
 Writing events file
   7023 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         12991      7023              0      5968         0         0
   in  9840.5     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         7023
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        6097
 Flickering pixels iter, pixels & cnts :   1           2           7
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            5
 Number of (internal) image counts   :         7023
 Number of image cts rejected (N, %) :         610486.91
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            5            0            0
 
 Image counts      :             0         7023            0            0
 Image cts rejected:             0         6104            0            0
 Image cts rej (%) :          0.00        86.91         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         7023            0            0
 Total cts rejected:             0         6104            0            0
 Total cts rej (%) :          0.00        86.91         0.00         0.00
 
 Number of clean counts accepted  :          919
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            5
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad87022000s000102h.evt use_events=no
Wrote cleaned events file to ad87022000s000102h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad87022000s000112h.unf into ad87022000s000112h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   5938.5826
 The mean of the selected column is                  19.470763
 The standard deviation of the selected column is    8.5012183
 The minimum of selected column is                   1.3401248
 The maximum of selected column is                   53.812687
 The number of points used in calculation is              305
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.9 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:48    0.17E+05    14021 0100
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          13069      7058              0      6011         0         0
 Writing events file
   7058 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         13069      7058              0      6011         0         0
   in  9840.5     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         7058
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        6097
 Flickering pixels iter, pixels & cnts :   1           2           7
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            5
 Number of (internal) image counts   :         7058
 Number of image cts rejected (N, %) :         610486.48
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            5            0            0
 
 Image counts      :             0         7058            0            0
 Image cts rejected:             0         6104            0            0
 Image cts rej (%) :          0.00        86.48         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         7058            0            0
 Total cts rejected:             0         6104            0            0
 Total cts rej (%) :          0.00        86.48         0.00         0.00
 
 Number of clean counts accepted  :          954
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            5
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad87022000s000112h.evt use_events=no
Wrote cleaned events file to ad87022000s000112h.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Skipping ad87022000s000201m.unf because of mode
-> Filtering ad87022000s000202m.unf into ad87022000s000202m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   3968.0655
 The mean of the selected column is                  21.333686
 The standard deviation of the selected column is    8.1465042
 The minimum of selected column is                   8.0312777
 The maximum of selected column is                   54.906437
 The number of points used in calculation is              186
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<45.7 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.10E+05     7904 0100
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
           7528      4305              0      3223         0         0
 Writing events file
   4305 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          7528      4305              0      3223         0         0
   in  6023.8     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4305
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        3760
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :         4305
 Number of image cts rejected (N, %) :         376087.34
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0         4305            0            0
 Image cts rejected:             0         3760            0            0
 Image cts rej (%) :          0.00        87.34         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         4305            0            0
 Total cts rejected:             0         3760            0            0
 Total cts rej (%) :          0.00        87.34         0.00         0.00
 
 Number of clean counts accepted  :          545
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad87022000s000202m.evt use_events=no
Wrote cleaned events file to ad87022000s000202m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad87022000s000212m.unf into ad87022000s000212m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   3968.0655
 The mean of the selected column is                  21.333686
 The standard deviation of the selected column is    8.1465042
 The minimum of selected column is                   8.0312777
 The maximum of selected column is                   54.906437
 The number of points used in calculation is              186
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<45.7 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.10E+05     8023 0100
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000212m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
           7558      4322              0      3236         0         0
 Writing events file
   4322 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          7558      4322              0      3236         0         0
   in  6023.8     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         4322
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        3760
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :         4322
 Number of image cts rejected (N, %) :         376087.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0         4322            0            0
 Image cts rejected:             0         3760            0            0
 Image cts rej (%) :          0.00        87.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         4322            0            0
 Total cts rejected:             0         3760            0            0
 Total cts rej (%) :          0.00        87.00         0.00         0.00
 
 Number of clean counts accepted  :          562
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s000212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad87022000s000212m.evt use_events=no
Wrote cleaned events file to ad87022000s000212m.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Skipping ad87022000s000301l.unf because of mode
-> Filtering ad87022000s000302l.unf into ad87022000s000302l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      LOW         1999-06-24  03:02:00    0.12E+05     3669 0100
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad87022000s000302l.evt use_events=no
Wrote cleaned events file to ad87022000s000302l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting ad87022000s000302l.evt since it contains 0 events
-> Filtering ad87022000s000312l.unf into ad87022000s000312l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     LOW         1999-06-24  03:02:00    0.12E+05     3729 0100
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad87022000s000312l.evt use_events=no
Wrote cleaned events file to ad87022000s000312l.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Deleting ad87022000s000312l.evt since it contains 0 events
-> Skipping ad87022000s100101h.unf because of mode
-> Filtering ad87022000s100102h.unf into ad87022000s100102h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   8781.7277
 The mean of the selected column is                  28.792550
 The standard deviation of the selected column is    12.494705
 The minimum of selected column is                   1.6279174
 The maximum of selected column is                   82.000282
 The number of points used in calculation is              305
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<66.2 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:44    0.17E+05    17568 0001
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100102h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          16155      8301              0      7854         0         0
 Writing events file
   8301 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16155      8301              0      7854         0         0
   in  9784.3     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 File NEVENTS keyword value  :         8301
 Total counts in chip images :         8300
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               5        7475
 
 Number of pixels rejected           :            5
 Number of (internal) image counts   :         8300
 Number of image cts rejected (N, %) :         747590.06
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            5
 
 Image counts      :             0            0            0         8300
 Image cts rejected:             0            0            0         7475
 Image cts rej (%) :          0.00         0.00         0.00        90.06
 
    filtering data...
 
 Total counts      :             0            0            0         8301
 Total cts rejected:             0            0            0         7476
 Total cts rej (%) :          0.00         0.00         0.00        90.06
 
 Number of clean counts accepted  :          825
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            5
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad87022000s100102h.evt use_events=no
Wrote cleaned events file to ad87022000s100102h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad87022000s100112h.unf into ad87022000s100112h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   8781.7277
 The mean of the selected column is                  28.792550
 The standard deviation of the selected column is    12.494705
 The minimum of selected column is                   1.6279174
 The maximum of selected column is                   82.000282
 The number of points used in calculation is              305
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<66.2 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:44    0.17E+05    17672 0001
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100112h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          16207      8325              0      7882         0         0
 Writing events file
   8325 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16207      8325              0      7882         0         0
   in  9784.3     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         8325
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               5        7477
 
 Number of pixels rejected           :            5
 Number of (internal) image counts   :         8325
 Number of image cts rejected (N, %) :         747789.81
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            5
 
 Image counts      :             0            0            0         8325
 Image cts rejected:             0            0            0         7477
 Image cts rej (%) :          0.00         0.00         0.00        89.81
 
    filtering data...
 
 Total counts      :             0            0            0         8325
 Total cts rejected:             0            0            0         7477
 Total cts rej (%) :          0.00         0.00         0.00        89.81
 
 Number of clean counts accepted  :          848
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            5
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad87022000s100112h.evt use_events=no
Wrote cleaned events file to ad87022000s100112h.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Skipping ad87022000s100201m.unf because of mode
-> Filtering ad87022000s100202m.unf into ad87022000s100202m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   6383.6467
 The mean of the selected column is                  35.074982
 The standard deviation of the selected column is    13.011192
 The minimum of selected column is                   10.687536
 The maximum of selected column is                   81.812775
 The number of points used in calculation is              182
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<74.1 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.10E+05     9523 0001
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100202m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
           8898      5067              0      3831         0         0
 Writing events file
   5067 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8898      5067              0      3831         0         0
   in  5959.8     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         5067
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               5        4509
 
 Number of pixels rejected           :            5
 Number of (internal) image counts   :         5067
 Number of image cts rejected (N, %) :         450988.99
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            5
 
 Image counts      :             0            0            0         5067
 Image cts rejected:             0            0            0         4509
 Image cts rej (%) :          0.00         0.00         0.00        88.99
 
    filtering data...
 
 Total counts      :             0            0            0         5067
 Total cts rejected:             0            0            0         4509
 Total cts rej (%) :          0.00         0.00         0.00        88.99
 
 Number of clean counts accepted  :          558
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            5
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad87022000s100202m.evt use_events=no
Wrote cleaned events file to ad87022000s100202m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad87022000s100212m.unf into ad87022000s100212m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   6383.6467
 The mean of the selected column is                  35.074982
 The standard deviation of the selected column is    13.011192
 The minimum of selected column is                   10.687536
 The maximum of selected column is                   81.812775
 The number of points used in calculation is              182
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<74.1 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.10E+05     9578 0001
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100212m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
           8918      5073              0      3845         0         0
 Writing events file
   5073 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8918      5073              0      3845         0         0
   in  5959.8     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         5073
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               5        4509
 
 Number of pixels rejected           :            5
 Number of (internal) image counts   :         5073
 Number of image cts rejected (N, %) :         450988.88
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            5
 
 Image counts      :             0            0            0         5073
 Image cts rejected:             0            0            0         4509
 Image cts rej (%) :          0.00         0.00         0.00        88.88
 
    filtering data...
 
 Total counts      :             0            0            0         5073
 Total cts rejected:             0            0            0         4509
 Total cts rej (%) :          0.00         0.00         0.00        88.88
 
 Number of clean counts accepted  :          564
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            5
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s100212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad87022000s100212m.evt use_events=no
Wrote cleaned events file to ad87022000s100212m.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Skipping ad87022000s100301l.unf because of mode
-> Filtering ad87022000s100302l.unf into ad87022000s100302l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      LOW         1999-06-24  03:02:00    0.12E+05     7671 0001
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100302l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad87022000s100302l.evt use_events=no
Wrote cleaned events file to ad87022000s100302l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting ad87022000s100302l.evt since it contains 0 events
-> Filtering ad87022000s100312l.unf into ad87022000s100312l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     LOW         1999-06-24  03:02:00    0.12E+05     7704 0001
Processing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100312l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87022000.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87022000.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87022000.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad87022000s100312l.evt use_events=no
Wrote cleaned events file to ad87022000s100312l.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Deleting ad87022000s100312l.evt since it contains 0 events
-> Filtering ad87022000g200170h.unf into ad87022000g200170h.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    29197     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29197      6765          11258     11174         0         0
 Writing events file
   6765 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         29197      6765          11258     11174         0         0
   in  10482.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        6765                6310               455
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad87022000g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Filtering ad87022000g200270l.unf into ad87022000g200270l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23719     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200270l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000g200270l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad87022000g200270l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad87022000g200270l.evt since it contains 0 events
-> Filtering ad87022000g200370m.unf into ad87022000g200370m.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    17154     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17154      4908           6493      5753         0         0
 Writing events file
   4908 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17154      4908           6493      5753         0         0
   in  7328.2     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        4908                4569               339
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000g200370m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad87022000g200370m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Filtering ad87022000g300170h.unf into ad87022000g300170h.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    27568     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          27568      6957           8798     11813         0         0
 Writing events file
   6957 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         27568      6957           8798     11813         0         0
   in  10484.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        6957                6421               536
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad87022000g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Filtering ad87022000g300270l.unf into ad87022000g300270l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23780     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300270l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
           0                   0                 0
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000g300270l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad87022000g300270l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad87022000g300270l.evt since it contains 0 events
-> Filtering ad87022000g300370m.unf into ad87022000g300370m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    16210     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16210      5035           5139      6036         0         0
 Writing events file
   5035 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16210      5035           5139      6036         0         0
   in  7328.2     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        5035                4607               428
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA > read events ad87022000g300370m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.d/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad87022000g300370m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

Generating images and exposure maps (21:20:49)

-> Generating exposure map ad87022000g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:
-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87022000g200170h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4403
 Mean   RA/DEC/ROLL :      188.0392      13.7229      65.4403
 Pnt    RA/DEC/ROLL :      188.0050      13.6883      65.4403
 
 Image rebin factor :             1
 Attitude Records   :         37648
 GTI intervals      :            22
 Total GTI (secs)   :     10482.320
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1499.98      1499.98
  20 Percent Complete: Total/live time:       2228.03      2228.03
  30 Percent Complete: Total/live time:       4122.18      4122.18
  40 Percent Complete: Total/live time:       6294.19      6294.19
  50 Percent Complete: Total/live time:       6294.19      6294.19
  60 Percent Complete: Total/live time:       7464.68      7464.68
  70 Percent Complete: Total/live time:       7464.68      7464.68
  80 Percent Complete: Total/live time:      10482.32     10482.32
 100 Percent Complete: Total/live time:      10482.32     10482.32
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:        29422
 Mean RA/DEC pixel offset:      -11.1124      -3.5564
 
    writing expo file: ad87022000g200170.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000g200170h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000g200170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6310     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6310      6222             88         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6310      6222             88         0         0         0
   in  10482.     seconds
 Image            has     6222 counts for 0.5936     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6310      3858             88         0         0      2364
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6310      3858             88         0         0      2364
   in  10482.     seconds
 Image            has     3858 counts for 0.3680     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6310      2386             88         0         0      3836
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6310      2386             88         0         0      3836
   in  10482.     seconds
 Image            has     2386 counts for 0.2276     counts/sec
 Command not found; type ? for a command listing
!ad87022000g200170h:ASCA >
!ad87022000g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000g200170h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g200170h:ASCA > read events ad87022000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g200170h:ASCA-GIS2-PH > set image sky
!ad87022000g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad87022000g200170h:ASCA-GIS2-PH > extract image
!ad87022000g200170h:ASCA-GIS2-PH > save image outfile=ad87022000g200170_all.img
Wrote image to file ad87022000g200170_all.img
!ad87022000g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad87022000g200170h:ASCA-GIS2-PH > extract image
!ad87022000g200170h:ASCA-GIS2-PH > save image outfile=ad87022000g200170_lo.img
Wrote image to file ad87022000g200170_lo.img
!ad87022000g200170h:ASCA-GIS2-PH > clear pha_cut
!ad87022000g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87022000g200170h:ASCA-GIS2-PH > extract image
!ad87022000g200170h:ASCA-GIS2-PH > save image outfile=ad87022000g200170_hi.img
Wrote image to file ad87022000g200170_hi.img
!ad87022000g200170h:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad87022000g200370.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87022000g200370m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000g200370m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4402
 Mean   RA/DEC/ROLL :      188.0400      13.7230      65.4402
 Pnt    RA/DEC/ROLL :      188.0123      13.6751      65.4402
 
 Image rebin factor :             1
 Attitude Records   :         37648
 GTI intervals      :            12
 Total GTI (secs)   :      7328.213
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1686.99      1686.99
  20 Percent Complete: Total/live time:       1686.99      1686.99
  30 Percent Complete: Total/live time:       3006.98      3006.98
  40 Percent Complete: Total/live time:       3006.98      3006.98
  50 Percent Complete: Total/live time:       5247.98      5247.98
  60 Percent Complete: Total/live time:       5247.98      5247.98
  70 Percent Complete: Total/live time:       5250.98      5250.98
  80 Percent Complete: Total/live time:       6384.09      6384.09
  90 Percent Complete: Total/live time:       6675.09      6675.09
 100 Percent Complete: Total/live time:       7328.22      7328.22
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:         6314
 Mean RA/DEC pixel offset:      -11.2456      -3.5078
 
    writing expo file: ad87022000g200370.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000g200370m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000g200370m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.73E+04     4569     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4569      4517             52         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4569      4517             52         0         0         0
   in  7328.2     seconds
 Image            has     4517 counts for 0.6164     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4569      2687             52         0         0      1830
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4569      2687             52         0         0      1830
   in  7328.2     seconds
 Image            has     2687 counts for 0.3667     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4569      1847             52         0         0      2670
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4569      1847             52         0         0      2670
   in  7328.2     seconds
 Image            has     1847 counts for 0.2520     counts/sec
 Command not found; type ? for a command listing
!ad87022000g200370m:ASCA >
!ad87022000g200370m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000g200370m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g200370m:ASCA > read events ad87022000g200370m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g200370m:ASCA-GIS2-PH > set image sky
!ad87022000g200370m:ASCA-GIS2-PH > filter region corner_point.reg
!ad87022000g200370m:ASCA-GIS2-PH > extract image
!ad87022000g200370m:ASCA-GIS2-PH > save image outfile=ad87022000g200370_all.img
Wrote image to file ad87022000g200370_all.img
!ad87022000g200370m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad87022000g200370m:ASCA-GIS2-PH > extract image
!ad87022000g200370m:ASCA-GIS2-PH > save image outfile=ad87022000g200370_lo.img
Wrote image to file ad87022000g200370_lo.img
!ad87022000g200370m:ASCA-GIS2-PH > clear pha_cut
!ad87022000g200370m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87022000g200370m:ASCA-GIS2-PH > extract image
!ad87022000g200370m:ASCA-GIS2-PH > save image outfile=ad87022000g200370_hi.img
Wrote image to file ad87022000g200370_hi.img
!ad87022000g200370m:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad87022000g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:
-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87022000g300170h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4373
 Mean   RA/DEC/ROLL :      188.0263      13.7015      65.4373
 Pnt    RA/DEC/ROLL :      188.0179      13.7098      65.4373
 
 Image rebin factor :             1
 Attitude Records   :         37648
 GTI intervals      :            21
 Total GTI (secs)   :     10484.320
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1499.98      1499.98
  20 Percent Complete: Total/live time:       2230.03      2230.03
  30 Percent Complete: Total/live time:       4124.18      4124.18
  40 Percent Complete: Total/live time:       6296.19      6296.19
  50 Percent Complete: Total/live time:       6296.19      6296.19
  60 Percent Complete: Total/live time:       7466.68      7466.68
  70 Percent Complete: Total/live time:       7466.68      7466.68
  80 Percent Complete: Total/live time:      10484.32     10484.32
 100 Percent Complete: Total/live time:      10484.32     10484.32
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:        29422
 Mean RA/DEC pixel offset:        0.5766      -2.3952
 
    writing expo file: ad87022000g300170.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000g300170h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000g300170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6421     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6421      6328             93         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6421      6328             93         0         0         0
   in  10484.     seconds
 Image            has     6328 counts for 0.6036     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6421      3832             93         0         0      2496
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6421      3832             93         0         0      2496
   in  10484.     seconds
 Image            has     3832 counts for 0.3655     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6421      2518             93         0         0      3810
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6421      2518             93         0         0      3810
   in  10484.     seconds
 Image            has     2518 counts for 0.2402     counts/sec
 Command not found; type ? for a command listing
!ad87022000g300170h:ASCA >
!ad87022000g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000g300170h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g300170h:ASCA > read events ad87022000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g300170h:ASCA-GIS3-PH > set image sky
!ad87022000g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad87022000g300170h:ASCA-GIS3-PH > extract image
!ad87022000g300170h:ASCA-GIS3-PH > save image outfile=ad87022000g300170_all.img
Wrote image to file ad87022000g300170_all.img
!ad87022000g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad87022000g300170h:ASCA-GIS3-PH > extract image
!ad87022000g300170h:ASCA-GIS3-PH > save image outfile=ad87022000g300170_lo.img
Wrote image to file ad87022000g300170_lo.img
!ad87022000g300170h:ASCA-GIS3-PH > clear pha_cut
!ad87022000g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87022000g300170h:ASCA-GIS3-PH > extract image
!ad87022000g300170h:ASCA-GIS3-PH > save image outfile=ad87022000g300170_hi.img
Wrote image to file ad87022000g300170_hi.img
!ad87022000g300170h:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad87022000g300370.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87022000g300370m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000g300370m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4372
 Mean   RA/DEC/ROLL :      188.0271      13.7015      65.4372
 Pnt    RA/DEC/ROLL :      188.0251      13.6966      65.4372
 
 Image rebin factor :             1
 Attitude Records   :         37648
 GTI intervals      :            12
 Total GTI (secs)   :      7328.213
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1686.99      1686.99
  20 Percent Complete: Total/live time:       1686.99      1686.99
  30 Percent Complete: Total/live time:       3006.98      3006.98
  40 Percent Complete: Total/live time:       3006.98      3006.98
  50 Percent Complete: Total/live time:       5247.98      5247.98
  60 Percent Complete: Total/live time:       5247.98      5247.98
  70 Percent Complete: Total/live time:       5250.98      5250.98
  80 Percent Complete: Total/live time:       6384.09      6384.09
  90 Percent Complete: Total/live time:       6675.09      6675.09
 100 Percent Complete: Total/live time:       7328.22      7328.22
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:         6314
 Mean RA/DEC pixel offset:        0.4434      -2.3466
 
    writing expo file: ad87022000g300370.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000g300370m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000g300370m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.73E+04     4607     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4607      4530             77         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4607      4530             77         0         0         0
   in  7328.2     seconds
 Image            has     4530 counts for 0.6182     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4607      2690             77         0         0      1840
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4607      2690             77         0         0      1840
   in  7328.2     seconds
 Image            has     2690 counts for 0.3671     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4607      1855             77         0         0      2675
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4607      1855             77         0         0      2675
   in  7328.2     seconds
 Image            has     1855 counts for 0.2531     counts/sec
 Command not found; type ? for a command listing
!ad87022000g300370m:ASCA >
!ad87022000g300370m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000g300370m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g300370m:ASCA > read events ad87022000g300370m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000g300370m:ASCA-GIS3-PH > set image sky
!ad87022000g300370m:ASCA-GIS3-PH > filter region corner_point.reg
!ad87022000g300370m:ASCA-GIS3-PH > extract image
!ad87022000g300370m:ASCA-GIS3-PH > save image outfile=ad87022000g300370_all.img
Wrote image to file ad87022000g300370_all.img
!ad87022000g300370m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad87022000g300370m:ASCA-GIS3-PH > extract image
!ad87022000g300370m:ASCA-GIS3-PH > save image outfile=ad87022000g300370_lo.img
Wrote image to file ad87022000g300370_lo.img
!ad87022000g300370m:ASCA-GIS3-PH > clear pha_cut
!ad87022000g300370m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87022000g300370m:ASCA-GIS3-PH > extract image
!ad87022000g300370m:ASCA-GIS3-PH > save image outfile=ad87022000g300370_hi.img
Wrote image to file ad87022000g300370_hi.img
!ad87022000g300370m:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad87022000s000102.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87022000s000102h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000s000102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4422
 Mean   RA/DEC/ROLL :      188.0471      13.7059      65.4422
 Pnt    RA/DEC/ROLL :      187.9990      13.7047      65.4422
 
 Image rebin factor :             4
 Attitude Records   :         37648
 Hot Pixels         :             5
 GTI intervals      :            25
 Total GTI (secs)   :      9840.535
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1352.45      1352.45
  20 Percent Complete: Total/live time:       2202.43      2202.43
  30 Percent Complete: Total/live time:       3684.00      3684.00
  40 Percent Complete: Total/live time:       5728.00      5728.00
  50 Percent Complete: Total/live time:       5728.00      5728.00
  60 Percent Complete: Total/live time:       6967.12      6967.12
  70 Percent Complete: Total/live time:       7425.12      7425.12
  80 Percent Complete: Total/live time:       7990.12      7990.12
  90 Percent Complete: Total/live time:       9806.88      9806.88
 100 Percent Complete: Total/live time:       9840.54      9840.54
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:        26339
 Mean RA/DEC pixel offset:      -48.6431     -93.7102
 
    writing expo file: ad87022000s000102.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000s000102h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000s000102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:48    0.98E+04      919 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            919       919              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           919       919              0         0         0         0
   in  9840.5     seconds
 Image            has      919 counts for 9.3389E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            919       641              0         0         0       278
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           919       641              0         0         0       278
   in  9840.5     seconds
 Image            has      641 counts for 6.5139E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            919       279              0         0         0       640
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           919       279              0         0         0       640
   in  9840.5     seconds
 Image            has      279 counts for 2.8352E-02 counts/sec
 Command not found; type ? for a command listing
!ad87022000s000102h:ASCA >
!ad87022000s000102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000s000102h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s000102h:ASCA > read events ad87022000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s000102h:ASCA-SIS0-BRIGHT > set image sky
!ad87022000s000102h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad87022000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad87022000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad87022000s000102_all.img
Wrote image to file ad87022000s000102_all.img
!ad87022000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad87022000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad87022000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad87022000s000102_lo.img
Wrote image to file ad87022000s000102_lo.img
!ad87022000s000102h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad87022000s000102h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87022000s000102h:ASCA-SIS0-BRIGHT > extract image
!ad87022000s000102h:ASCA-SIS0-BRIGHT > save image outfile=ad87022000s000102_hi.img
Wrote image to file ad87022000s000102_hi.img
!ad87022000s000102h:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad87022000s000202.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87022000s000202m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000s000202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4421
 Mean   RA/DEC/ROLL :      188.0477      13.7054      65.4421
 Pnt    RA/DEC/ROLL :      188.0044      13.6923      65.4421
 
 Image rebin factor :             4
 Attitude Records   :         37648
 Hot Pixels         :             3
 GTI intervals      :            25
 Total GTI (secs)   :      6023.837
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1078.99      1078.99
  20 Percent Complete: Total/live time:       1478.99      1478.99
  30 Percent Complete: Total/live time:       2302.99      2302.99
  40 Percent Complete: Total/live time:       2592.00      2592.00
  50 Percent Complete: Total/live time:       4231.84      4231.84
  60 Percent Complete: Total/live time:       4231.84      4231.84
  70 Percent Complete: Total/live time:       4402.74      4402.74
  80 Percent Complete: Total/live time:       5159.85      5159.85
  90 Percent Complete: Total/live time:       5486.73      5486.73
 100 Percent Complete: Total/live time:       6023.84      6023.84
 
 Number of attitude steps  used:           29
 Number of attitude steps avail:         6396
 Mean RA/DEC pixel offset:      -49.7125     -94.1277
 
    writing expo file: ad87022000s000202.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000s000202m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000s000202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.60E+04      545 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            545       545              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           545       545              0         0         0         0
   in  6023.8     seconds
 Image            has      545 counts for 9.0474E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            545       367              0         0         0       178
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           545       367              0         0         0       178
   in  6023.8     seconds
 Image            has      367 counts for 6.0925E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            545       178              0         0         0       367
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           545       178              0         0         0       367
   in  6023.8     seconds
 Image            has      178 counts for 2.9549E-02 counts/sec
 Command not found; type ? for a command listing
!ad87022000s000202m:ASCA >
!ad87022000s000202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000s000202m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s000202m:ASCA > read events ad87022000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s000202m:ASCA-SIS0-BRIGHT > set image sky
!ad87022000s000202m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad87022000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad87022000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad87022000s000202_all.img
Wrote image to file ad87022000s000202_all.img
!ad87022000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad87022000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad87022000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad87022000s000202_lo.img
Wrote image to file ad87022000s000202_lo.img
!ad87022000s000202m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad87022000s000202m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87022000s000202m:ASCA-SIS0-BRIGHT > extract image
!ad87022000s000202m:ASCA-SIS0-BRIGHT > save image outfile=ad87022000s000202_hi.img
Wrote image to file ad87022000s000202_hi.img
!ad87022000s000202m:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad87022000s100102.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87022000s100102h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000s100102h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4387
 Mean   RA/DEC/ROLL :      188.0326      13.7134      65.4387
 Pnt    RA/DEC/ROLL :      188.0135      13.6972      65.4387
 
 Image rebin factor :             4
 Attitude Records   :         37648
 Hot Pixels         :             5
 GTI intervals      :            25
 Total GTI (secs)   :      9784.261
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1384.45      1384.45
  20 Percent Complete: Total/live time:       2138.43      2138.43
  30 Percent Complete: Total/live time:       3632.00      3632.00
  40 Percent Complete: Total/live time:       5676.00      5676.00
  50 Percent Complete: Total/live time:       5676.00      5676.00
  60 Percent Complete: Total/live time:       6915.12      6915.12
  70 Percent Complete: Total/live time:       7373.12      7373.12
  80 Percent Complete: Total/live time:       7938.12      7938.12
  90 Percent Complete: Total/live time:       9750.61      9750.61
 100 Percent Complete: Total/live time:       9784.26      9784.26
 
 Number of attitude steps  used:           31
 Number of attitude steps avail:        26275
 Mean RA/DEC pixel offset:      -52.9440     -24.1768
 
    writing expo file: ad87022000s100102.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000s100102h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000s100102h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:44    0.98E+04      825 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            825       825              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           825       825              0         0         0         0
   in  9784.3     seconds
 Image            has      825 counts for 8.4319E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            825       531              0         0         0       294
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           825       531              0         0         0       294
   in  9784.3     seconds
 Image            has      531 counts for 5.4271E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            825       296              0         0         0       529
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           825       296              0         0         0       529
   in  9784.3     seconds
 Image            has      296 counts for 3.0253E-02 counts/sec
 Command not found; type ? for a command listing
!ad87022000s100102h:ASCA >
!ad87022000s100102h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000s100102h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s100102h:ASCA > read events ad87022000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s100102h:ASCA-SIS1-BRIGHT > set image sky
!ad87022000s100102h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad87022000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad87022000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad87022000s100102_all.img
Wrote image to file ad87022000s100102_all.img
!ad87022000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad87022000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad87022000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad87022000s100102_lo.img
Wrote image to file ad87022000s100102_lo.img
!ad87022000s100102h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad87022000s100102h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87022000s100102h:ASCA-SIS1-BRIGHT > extract image
!ad87022000s100102h:ASCA-SIS1-BRIGHT > save image outfile=ad87022000s100102_hi.img
Wrote image to file ad87022000s100102_hi.img
!ad87022000s100102h:ASCA-SIS1-BRIGHT > exit save_session=no
-> Generating exposure map ad87022000s100202.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87022000s100202m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87022000s100202m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990624_0151.1430
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :      188.0224      13.7048      65.4387
 Mean   RA/DEC/ROLL :      188.0332      13.7131      65.4387
 Pnt    RA/DEC/ROLL :      188.0189      13.6848      65.4387
 
 Image rebin factor :             4
 Attitude Records   :         37648
 Hot Pixels         :             5
 GTI intervals      :            28
 Total GTI (secs)   :      5959.836
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1216.00      1216.00
  20 Percent Complete: Total/live time:       1414.99      1414.99
  30 Percent Complete: Total/live time:       2560.00      2560.00
  40 Percent Complete: Total/live time:       2560.00      2560.00
  50 Percent Complete: Total/live time:       4135.84      4135.84
  60 Percent Complete: Total/live time:       4135.84      4135.84
  70 Percent Complete: Total/live time:       4306.74      4306.74
  80 Percent Complete: Total/live time:       5095.85      5095.85
  90 Percent Complete: Total/live time:       5426.73      5426.73
 100 Percent Complete: Total/live time:       5959.84      5959.84
 
 Number of attitude steps  used:           27
 Number of attitude steps avail:         6347
 Mean RA/DEC pixel offset:      -53.2603     -24.2145
 
    writing expo file: ad87022000s100202.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87022000s100202m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87022000s100202m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.60E+04      558 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            558       558              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           558       558              0         0         0         0
   in  5959.8     seconds
 Image            has      558 counts for 9.3627E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            558       379              0         0         0       179
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           558       379              0         0         0       179
   in  5959.8     seconds
 Image            has      379 counts for 6.3592E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            558       179              0         0         0       379
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           558       179              0         0         0       379
   in  5959.8     seconds
 Image            has      179 counts for 3.0034E-02 counts/sec
 Command not found; type ? for a command listing
!ad87022000s100202m:ASCA >
!ad87022000s100202m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87022000s100202m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s100202m:ASCA > read events ad87022000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!ad87022000s100202m:ASCA-SIS1-BRIGHT > set image sky
!ad87022000s100202m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad87022000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad87022000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad87022000s100202_all.img
Wrote image to file ad87022000s100202_all.img
!ad87022000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad87022000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad87022000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad87022000s100202_lo.img
Wrote image to file ad87022000s100202_lo.img
!ad87022000s100202m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad87022000s100202m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87022000s100202m:ASCA-SIS1-BRIGHT > extract image
!ad87022000s100202m:ASCA-SIS1-BRIGHT > save image outfile=ad87022000s100202_hi.img
Wrote image to file ad87022000s100202_hi.img
!ad87022000s100202m:ASCA-SIS1-BRIGHT > exit save_session=no
-> Summing sis images
-> Exposure for ad87022000s000102.expo is 9840.535156 seconds
-> Exposure for ad87022000s000202.expo is 6023.836914 seconds
-> Exposure for ad87022000s100102.expo is 9784.260742 seconds
-> Exposure for ad87022000s100202.expo is 5959.836426 seconds
-> Summing the following images to produce ad87022000sis32002.totexpo
ad87022000s000102.expo
ad87022000s000202.expo
ad87022000s100102.expo
ad87022000s100202.expo
-> Setting EXPOSURE=31608.469238 in ad87022000sis32002.totexpo
-> Exposure for ad87022000s000102_all.img is 9.840536124706268E+03 seconds
-> ad87022000s000102_all.img has 919 counts
-> Exposure for ad87022000s000202_all.img is 6.023836776077747E+03 seconds
-> ad87022000s000202_all.img has 545 counts
-> Exposure for ad87022000s100102_all.img is 9.784261562705040E+03 seconds
-> ad87022000s100102_all.img has 825 counts
-> Exposure for ad87022000s100202_all.img is 5.959836776077747E+03 seconds
-> ad87022000s100202_all.img has 558 counts
-> Summing the following images to produce ad87022000sis32002_all.totsky
ad87022000s000102_all.img
ad87022000s000202_all.img
ad87022000s100102_all.img
ad87022000s100202_all.img
-> Setting EXPOSURE=31608.4712395667 in ad87022000sis32002_all.totsky
-> Setting TOTCTS=2847 in ad87022000sis32002_all.totsky
-> Exposure for ad87022000s000102_lo.img is 9.840536124706268E+03 seconds
-> ad87022000s000102_lo.img has 641 counts
-> Exposure for ad87022000s000202_lo.img is 6.023836776077747E+03 seconds
-> ad87022000s000202_lo.img has 367 counts
-> Exposure for ad87022000s100102_lo.img is 9.784261562705040E+03 seconds
-> ad87022000s100102_lo.img has 531 counts
-> Exposure for ad87022000s100202_lo.img is 5.959836776077747E+03 seconds
-> ad87022000s100202_lo.img has 379 counts
-> Summing the following images to produce ad87022000sis32002_lo.totsky
ad87022000s000102_lo.img
ad87022000s000202_lo.img
ad87022000s100102_lo.img
ad87022000s100202_lo.img
-> Setting EXPOSURE=31608.4712395667 in ad87022000sis32002_lo.totsky
-> Setting TOTCTS=1918 in ad87022000sis32002_lo.totsky
-> Exposure for ad87022000s000102_hi.img is 9.840536124706268E+03 seconds
-> ad87022000s000102_hi.img has 279 counts
-> Exposure for ad87022000s000202_hi.img is 6.023836776077747E+03 seconds
-> ad87022000s000202_hi.img has 178 counts
-> Exposure for ad87022000s100102_hi.img is 9.784261562705040E+03 seconds
-> ad87022000s100102_hi.img has 296 counts
-> Exposure for ad87022000s100202_hi.img is 5.959836776077747E+03 seconds
-> ad87022000s100202_hi.img has 179 counts
-> Summing the following images to produce ad87022000sis32002_hi.totsky
ad87022000s000102_hi.img
ad87022000s000202_hi.img
ad87022000s100102_hi.img
ad87022000s100202_hi.img
-> Setting EXPOSURE=31608.4712395667 in ad87022000sis32002_hi.totsky
-> Setting TOTCTS=932 in ad87022000sis32002_hi.totsky
-> Running XIMAGE to create ad87022000sis32002.gif
-> Standard Output From STOOL ximage:
 No of detectors read in:   21
![1]XIMAGE> read/fits ad87022000sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 4.0000000
 Saving current map
![2]XIMAGE> read/expo ad87022000sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 526.80786
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     12.5000
  Min and max :   0  10
 Max-preserving scaling factor :     5.0000000
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     21103.1
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit
-> Summing gis images
-> Exposure for ad87022000g200170.expo is 10482.320312 seconds
-> Exposure for ad87022000g200370.expo is 7328.213379 seconds
-> Exposure for ad87022000g300170.expo is 10484.320312 seconds
-> Exposure for ad87022000g300370.expo is 7328.213379 seconds
-> Summing the following images to produce ad87022000gis25670.totexpo
ad87022000g200170.expo
ad87022000g200370.expo
ad87022000g300170.expo
ad87022000g300370.expo
-> Setting EXPOSURE=35623.067382 in ad87022000gis25670.totexpo
-> Exposure for ad87022000g200170_all.img is 1.048232117277384E+04 seconds
-> ad87022000g200170_all.img has 6222 counts
-> Exposure for ad87022000g200370_all.img is 7.328214461922646E+03 seconds
-> ad87022000g200370_all.img has 4517 counts
-> Exposure for ad87022000g300170_all.img is 1.048432115909457E+04 seconds
-> ad87022000g300170_all.img has 6328 counts
-> Exposure for ad87022000g300370_all.img is 7.328214461922646E+03 seconds
-> ad87022000g300370_all.img has 4530 counts
-> Summing the following images to produce ad87022000gis25670_all.totsky
ad87022000g200170_all.img
ad87022000g200370_all.img
ad87022000g300170_all.img
ad87022000g300370_all.img
-> Setting EXPOSURE=35623.0712557136 in ad87022000gis25670_all.totsky
-> Setting TOTCTS=21597 in ad87022000gis25670_all.totsky
-> Exposure for ad87022000g200170_lo.img is 1.048232117277384E+04 seconds
-> ad87022000g200170_lo.img has 3858 counts
-> Exposure for ad87022000g200370_lo.img is 7.328214461922646E+03 seconds
-> ad87022000g200370_lo.img has 2687 counts
-> Exposure for ad87022000g300170_lo.img is 1.048432115909457E+04 seconds
-> ad87022000g300170_lo.img has 3832 counts
-> Exposure for ad87022000g300370_lo.img is 7.328214461922646E+03 seconds
-> ad87022000g300370_lo.img has 2690 counts
-> Summing the following images to produce ad87022000gis25670_lo.totsky
ad87022000g200170_lo.img
ad87022000g200370_lo.img
ad87022000g300170_lo.img
ad87022000g300370_lo.img
-> Setting EXPOSURE=35623.0712557136 in ad87022000gis25670_lo.totsky
-> Setting TOTCTS=13067 in ad87022000gis25670_lo.totsky
-> Exposure for ad87022000g200170_hi.img is 1.048232117277384E+04 seconds
-> ad87022000g200170_hi.img has 2386 counts
-> Exposure for ad87022000g200370_hi.img is 7.328214461922646E+03 seconds
-> ad87022000g200370_hi.img has 1847 counts
-> Exposure for ad87022000g300170_hi.img is 1.048432115909457E+04 seconds
-> ad87022000g300170_hi.img has 2518 counts
-> Exposure for ad87022000g300370_hi.img is 7.328214461922646E+03 seconds
-> ad87022000g300370_hi.img has 1855 counts
-> Summing the following images to produce ad87022000gis25670_hi.totsky
ad87022000g200170_hi.img
ad87022000g200370_hi.img
ad87022000g300170_hi.img
ad87022000g300370_hi.img
-> Setting EXPOSURE=35623.0712557136 in ad87022000gis25670_hi.totsky
-> Setting TOTCTS=8606 in ad87022000gis25670_hi.totsky
-> Running XIMAGE to create ad87022000gis25670.gif
-> Standard Output From STOOL ximage:
 No of detectors read in:   21
![1]XIMAGE> read/fits ad87022000gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 6.0000000
 Saving current map
![2]XIMAGE> read/expo ad87022000gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 593.71790
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :     8.33333
  Min and max :   0  15
 Max-preserving scaling factor :     3.3333332
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     142495.
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (21:38:17)

-> Detecting sources in all images
-> Smoothing ad87022000gis25670_all.totsky with ad87022000gis25670.totexpo
-> Detecting sources in ad87022000gis25670_all.smooth
-> Smoothing ad87022000gis25670_hi.totsky with ad87022000gis25670.totexpo
-> Detecting sources in ad87022000gis25670_hi.smooth
-> Smoothing ad87022000gis25670_lo.totsky with ad87022000gis25670.totexpo
-> Detecting sources in ad87022000gis25670_lo.smooth
-> Determining extraction radii
-> Eliminating redundant sources
-> The following sources have radius > 2

-> Making  image ad87022000gis25670_source.ps showing sources

-> stdout output from colorpic


color plane 0
color plane 1
color plane 2
writing image
image written


-> Creating source catalog ad87022000gis25670.src

-> Smoothing ad87022000sis32002_all.totsky with ad87022000sis32002.totexpo

-> Detecting sources in ad87022000sis32002_all.smooth

-> Smoothing ad87022000sis32002_hi.totsky with ad87022000sis32002.totexpo

-> Detecting sources in ad87022000sis32002_hi.smooth

-> Smoothing ad87022000sis32002_lo.totsky with ad87022000sis32002.totexpo

-> Detecting sources in ad87022000sis32002_lo.smooth

-> Determining extraction radii

-> Eliminating redundant sources

-> The following sources have radius > 2



-> Making  image ad87022000sis32002_source.ps showing sources

-> stdout output from colorpic


color plane 0
color plane 1
color plane 2
writing image
image written


-> Creating source catalog ad87022000sis32002.src

-> Generating region files for all sources




Extracting spectra and generating response matrices (21:39:34)


-> Fetching xrt_ea_v2_0.fits

-> Fetching xrt_psf_v2_0.fits

-> sisph2pi_110397.fits already present in current directory

-> Fetching sisechos_290296.fits

-> Fetching sisrddis_290296.fits

-> Standard Output From STOOL group_event_files:


1 ad87022000s000102h.evt 1464
1 ad87022000s000202m.evt 1464


-> Fetching SIS0_NOTCHIP0.1

-> Fetching SIS0_NOTCHIP2.1

-> Fetching SIS0_NOTCHIP3.1

-> Fetching SIS0_OFFCHIP.2

-> Extracting ad87022000s010102_0.pi from ad87022000s032002_0.reg and:


ad87022000s000102h.evt
ad87022000s000202m.evt


-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:48    0.98E+04      919 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.60E+04      545 0100
      2 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:48    0.98E+04      919 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            919       893             26         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            545       527             18         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1464      1420             44         0         0         0
   in  15864.     seconds
 Spectrum         has     1420 counts for 8.9509E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15864.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s010102_0.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad87022000s000202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad87022000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad87022000s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad87022000s010102_0.pi group=yes
Wrote spectrum to ad87022000s010102_0.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no


-> Deleting BLANK keyword from ad87022000s010102_0.pi

-> Grouping ad87022000s010102_0.pi to 40 counts/bin

-> Standard Output From FTOOL grppha:


 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15864.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      21  are grouped by a factor        5
 ...        22 -      25  are grouped by a factor        4
 ...        26 -      31  are grouped by a factor        3
 ...        32 -      53  are grouped by a factor        2
 ...        54 -      62  are grouped by a factor        3
 ...        63 -      72  are grouped by a factor        5
 ...        73 -      78  are grouped by a factor        6
 ...        79 -      88  are grouped by a factor       10
 ...        89 -     100  are grouped by a factor       12
 ...       101 -     109  are grouped by a factor        9
 ...       110 -     128  are grouped by a factor       19
 ...       129 -     153  are grouped by a factor       25
 ...       154 -     191  are grouped by a factor       38
 ...       192 -     252  are grouped by a factor       61
 ...       253 -     353  are grouped by a factor      101
 ...       354 -     511  are grouped by a factor      158
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s010102_0.pi
 ** grppha 2.9.0 completed successfully


-> Source occupies chip(s) 1

-> Fetching sis0c1p40_290296.fits

-> Generating ad87022000s010102_0.rmf

-> Standard Output From FTOOL sisrmg:


Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.


-> Generating ad87022000s010102_0.arf with point=no

-> Standard Output From FTOOL ascaarf:


ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   52 by   53 bins
               expanded to   52 by   53 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   120.55     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.41000E+03
 Weighted mean angle from optical axis  =  7.614 arcmin
 


-> Standard Output From STOOL group_event_files:


1 ad87022000s000112h.evt 1516
1 ad87022000s000212m.evt 1516


-> SIS0_NOTCHIP0.1 already present in current directory

-> SIS0_NOTCHIP2.1 already present in current directory

-> SIS0_NOTCHIP3.1 already present in current directory

-> SIS0_OFFCHIP.2 already present in current directory

-> Extracting ad87022000s010212_0.pi from ad87022000s032002_0.reg and:


ad87022000s000112h.evt
ad87022000s000212m.evt


-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:48    0.98E+04      954 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.60E+04      562 0100
      2 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:48    0.98E+04      954 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            954       925             29         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            562       541             21         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1516      1466             50         0         0         0
   in  15864.     seconds
 Spectrum         has     1466 counts for 9.2408E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15864.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s010212_0.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > read events ad87022000s000212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87022000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87022000s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad87022000s010212_0.pi group=yes
Wrote spectrum to ad87022000s010212_0.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no


-> Deleting BLANK keyword from ad87022000s010212_0.pi

-> Grouping ad87022000s010212_0.pi to 40 counts/bin

-> Standard Output From FTOOL grppha:


 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15864.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      31  of undefined grouping (Channel quality=bad)
 ...        32 -      43  are grouped by a factor       12
 ...        44 -      49  are grouped by a factor        6
 ...        50 -      54  are grouped by a factor        5
 ...        55 -      58  are grouped by a factor        4
 ...        59 -      63  are grouped by a factor        5
 ...        64 -      69  are grouped by a factor        3
 ...        70 -      77  are grouped by a factor        4
 ...        78 -      80  are grouped by a factor        3
 ...        81 -      88  are grouped by a factor        4
 ...        89 -      94  are grouped by a factor        3
 ...        95 -     106  are grouped by a factor        4
 ...       107 -     121  are grouped by a factor        5
 ...       122 -     128  are grouped by a factor        7
 ...       129 -     148  are grouped by a factor       10
 ...       149 -     161  are grouped by a factor       13
 ...       162 -     184  are grouped by a factor       23
 ...       185 -     226  are grouped by a factor       21
 ...       227 -     264  are grouped by a factor       38
 ...       265 -     314  are grouped by a factor       50
 ...       315 -     399  are grouped by a factor       85
 ...       400 -     503  are grouped by a factor      104
 ...       504 -     639  are grouped by a factor      136
 ...       640 -    1023  are grouped by a factor      192
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s010212_0.pi
 ** grppha 2.9.0 completed successfully


-> Source occupies chip(s) 1

-> sis0c1p40_290296.fits already present in current directory

-> Generating ad87022000s010212_0.rmf

-> Standard Output From FTOOL sisrmg:


Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C1 Bright2 PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.


-> Generating ad87022000s010212_0.arf with point=no

-> Standard Output From FTOOL ascaarf:


ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   52 by   53 bins
               expanded to   52 by   53 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   120.55     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.45600E+03
 Weighted mean angle from optical axis  =  7.600 arcmin
 


-> Standard Output From STOOL group_event_files:


1 ad87022000s100102h.evt 1383
1 ad87022000s100202m.evt 1383


-> Fetching SIS1_NOTCHIP0.1

-> Fetching SIS1_NOTCHIP1.1

-> Fetching SIS1_NOTCHIP2.1

-> Fetching SIS1_OFFCHIP.2

-> Extracting ad87022000s110102_0.pi from ad87022000s132002_0.reg and:


ad87022000s100102h.evt
ad87022000s100202m.evt


-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:44    0.98E+04      825 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.60E+04      558 0001
      2 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:44    0.98E+04      825 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            825       809             16         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            558       551              7         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1383      1360             23         0         0         0
   in  15744.     seconds
 Spectrum         has     1360 counts for 8.6382E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15744.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s110102_0.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad87022000s100202m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad87022000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad87022000s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad87022000s110102_0.pi group=yes
Wrote spectrum to ad87022000s110102_0.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no


-> Deleting BLANK keyword from ad87022000s110102_0.pi

-> Grouping ad87022000s110102_0.pi to 40 counts/bin

-> Standard Output From FTOOL grppha:


 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15744.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      22  are grouped by a factor        6
 ...        23 -      26  are grouped by a factor        4
 ...        27 -      29  are grouped by a factor        3
 ...        30 -      51  are grouped by a factor        2
 ...        52 -      57  are grouped by a factor        3
 ...        58 -      61  are grouped by a factor        4
 ...        62 -      66  are grouped by a factor        5
 ...        67 -      70  are grouped by a factor        4
 ...        71 -      77  are grouped by a factor        7
 ...        78 -      85  are grouped by a factor        8
 ...        86 -      97  are grouped by a factor       12
 ...        98 -     114  are grouped by a factor       17
 ...       115 -     135  are grouped by a factor       21
 ...       136 -     173  are grouped by a factor       38
 ...       174 -     222  are grouped by a factor       49
 ...       223 -     268  are grouped by a factor       46
 ...       269 -     336  are grouped by a factor       68
 ...       337 -     448  are grouped by a factor      112
 ...       449 -     511  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s110102_0.pi
 ** grppha 2.9.0 completed successfully


-> Source occupies chip(s) 3

-> Fetching sis1c3p40_290296.fits

-> Generating ad87022000s110102_0.rmf

-> Standard Output From FTOOL sisrmg:


Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.


-> Generating ad87022000s110102_0.arf with point=no

-> Standard Output From FTOOL ascaarf:


ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   53 by   53 bins
               expanded to   53 by   53 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   120.55     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.35300E+03
 Weighted mean angle from optical axis  = 10.418 arcmin
 


-> Standard Output From STOOL group_event_files:


1 ad87022000s100112h.evt 1412
1 ad87022000s100212m.evt 1412


-> SIS1_NOTCHIP0.1 already present in current directory

-> SIS1_NOTCHIP1.1 already present in current directory

-> SIS1_NOTCHIP2.1 already present in current directory

-> SIS1_OFFCHIP.2 already present in current directory

-> Extracting ad87022000s110212_0.pi from ad87022000s132002_0.reg and:


ad87022000s100112h.evt
ad87022000s100212m.evt


-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:44    0.98E+04      848 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.60E+04      564 0001
      2 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:44    0.98E+04      848 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            848       828             20         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            564       557              7         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1412      1385             27         0         0         0
   in  15744.     seconds
 Spectrum         has     1385 counts for 8.7969E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15744.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s110212_0.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad87022000s100212m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87022000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87022000s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad87022000s110212_0.pi group=yes
Wrote spectrum to ad87022000s110212_0.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no


-> Deleting BLANK keyword from ad87022000s110212_0.pi

-> Grouping ad87022000s110212_0.pi to 40 counts/bin

-> Standard Output From FTOOL grppha:


 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 15744.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.10462         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      32  of undefined grouping (Channel quality=bad)
 ...        33 -      45  are grouped by a factor       13
 ...        46 -      53  are grouped by a factor        8
 ...        54 -      59  are grouped by a factor        6
 ...        60 -      67  are grouped by a factor        4
 ...        68 -      73  are grouped by a factor        3
 ...        74 -      77  are grouped by a factor        4
 ...        78 -      83  are grouped by a factor        3
 ...        84 -      95  are grouped by a factor        4
 ...        96 -      98  are grouped by a factor        3
 ...        99 -     102  are grouped by a factor        4
 ...       103 -     117  are grouped by a factor        5
 ...       118 -     144  are grouped by a factor        9
 ...       145 -     159  are grouped by a factor       15
 ...       160 -     176  are grouped by a factor       17
 ...       177 -     204  are grouped by a factor       28
 ...       205 -     240  are grouped by a factor       36
 ...       241 -     281  are grouped by a factor       41
 ...       282 -     355  are grouped by a factor       74
 ...       356 -     463  are grouped by a factor      108
 ...       464 -     545  are grouped by a factor       82
 ...       546 -     670  are grouped by a factor      125
 ...       671 -     855  are grouped by a factor      185
 ...       856 -    1023  are grouped by a factor      168
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000s110212_0.pi
 ** grppha 2.9.0 completed successfully


-> Source occupies chip(s) 3

-> sis1c3p40_290296.fits already present in current directory

-> Generating ad87022000s110212_0.rmf

-> Standard Output From FTOOL sisrmg:


Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C3 Bright2 PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.


-> Generating ad87022000s110212_0.arf with point=no

-> Standard Output From FTOOL ascaarf:


ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   53 by   53 bins
               expanded to   53 by   53 bins
 First WMAP bin is at detector pixel  232  216
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   120.55     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.37600E+03
 Weighted mean angle from optical axis  = 10.424 arcmin
 


-> Standard Output From STOOL group_event_files:


1 ad87022000g200170h.evt 10879
1 ad87022000g200370m.evt 10879


-> GIS2_REGION256.4 already present in current directory

-> Extracting ad87022000g210170_0.pi from ad87022000g225670_0.reg and:


ad87022000g200170h.evt
ad87022000g200370m.evt


-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6310     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.73E+04     4569     1024
      2 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6310     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6310      6310              0         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4569      4569              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10879     10879              0         0         0         0
   in  17811.     seconds
 Spectrum         has    10879 counts for 0.6108     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 17811.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.36888         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000g210170_0.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS2-PH > read events ad87022000g200370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87022000g225670_0.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad87022000g210170_0.pi group=yes
Wrote spectrum to ad87022000g210170_0.pi
!xsel:ASCA-GIS2-PH > exit save_session=no


-> Deleting BLANK keyword from ad87022000g210170_0.pi

-> Correcting ad87022000g210170_0.pi for dead time

-> Standard Output From FTOOL deadtime:


... read all the files from deadlist.tmp


-> Grouping ad87022000g210170_0.pi to 40 counts/bin

-> Standard Output From FTOOL grppha:


 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 17394.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.36888         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      21  are grouped by a factor       22
 ...        22 -      27  are grouped by a factor        2
 ...        28 -      30  are grouped by a factor        3
 ...        31 -      32  are grouped by a factor        2
 ...        33 -      47  are grouped by a factor        3
 ...        48 -      51  are grouped by a factor        2
 ...        52 -      54  are grouped by a factor        3
 ...        55 -      66  are grouped by a factor        2
 ...        67 -      67  are single channels
 ...        68 -      73  are grouped by a factor        2
 ...        74 -      74  are single channels
 ...        75 -      80  are grouped by a factor        2
 ...        81 -     141  are single channels
 ...       142 -     143  are grouped by a factor        2
 ...       144 -     150  are single channels
 ...       151 -     154  are grouped by a factor        2
 ...       155 -     163  are single channels
 ...       164 -     185  are grouped by a factor        2
 ...       186 -     186  are single channels
 ...       187 -     188  are grouped by a factor        2
 ...       189 -     191  are grouped by a factor        3
 ...       192 -     195  are grouped by a factor        2
 ...       196 -     198  are grouped by a factor        3
 ...       199 -     202  are grouped by a factor        2
 ...       203 -     220  are grouped by a factor        3
 ...       221 -     224  are grouped by a factor        4
 ...       225 -     239  are grouped by a factor        3
 ...       240 -     247  are grouped by a factor        4
 ...       248 -     259  are grouped by a factor        3
 ...       260 -     267  are grouped by a factor        4
 ...       268 -     270  are grouped by a factor        3
 ...       271 -     275  are grouped by a factor        5
 ...       276 -     279  are grouped by a factor        4
 ...       280 -     294  are grouped by a factor        5
 ...       295 -     306  are grouped by a factor        6
 ...       307 -     310  are grouped by a factor        4
 ...       311 -     320  are grouped by a factor        5
 ...       321 -     324  are grouped by a factor        4
 ...       325 -     336  are grouped by a factor        6
 ...       337 -     343  are grouped by a factor        7
 ...       344 -     349  are grouped by a factor        6
 ...       350 -     356  are grouped by a factor        7
 ...       357 -     361  are grouped by a factor        5
 ...       362 -     369  are grouped by a factor        8
 ...       370 -     376  are grouped by a factor        7
 ...       377 -     382  are grouped by a factor        6
 ...       383 -     390  are grouped by a factor        8
 ...       391 -     399  are grouped by a factor        9
 ...       400 -     405  are grouped by a factor        6
 ...       406 -     412  are grouped by a factor        7
 ...       413 -     421  are grouped by a factor        9
 ...       422 -     437  are grouped by a factor        8
 ...       438 -     444  are grouped by a factor        7
 ...       445 -     452  are grouped by a factor        8
 ...       453 -     462  are grouped by a factor       10
 ...       463 -     474  are grouped by a factor       12
 ...       475 -     485  are grouped by a factor       11
 ...       486 -     495  are grouped by a factor       10
 ...       496 -     510  are grouped by a factor       15
 ...       511 -     523  are grouped by a factor       13
 ...       524 -     539  are grouped by a factor       16
 ...       540 -     554  are grouped by a factor       15
 ...       555 -     571  are grouped by a factor       17
 ...       572 -     590  are grouped by a factor       19
 ...       591 -     608  are grouped by a factor       18
 ...       609 -     628  are grouped by a factor       20
 ...       629 -     651  are grouped by a factor       23
 ...       652 -     671  are grouped by a factor       20
 ...       672 -     689  are grouped by a factor       18
 ...       690 -     711  are grouped by a factor       22
 ...       712 -     738  are grouped by a factor       27
 ...       739 -     761  are grouped by a factor       23
 ...       762 -     795  are grouped by a factor       34
 ...       796 -     834  are grouped by a factor       39
 ...       835 -     881  are grouped by a factor       47
 ...       882 -     915  are grouped by a factor       34
 ...       916 -     941  are grouped by a factor       26
 ...       942 -     984  are grouped by a factor       43
 ...       985 -    1023  are grouped by a factor       39
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000g210170_0.pi
 ** grppha 2.9.0 completed successfully


-> Fetching gis2v4_0.rmf

-> Fetching s2bev1.fits

-> Fetching s2gridv3.fits

-> Generating ad87022000g210170_0.arf with point=no

-> Standard Output From FTOOL ascaarf:


ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size  177 by  178 bins
               expanded to  256 by  256 bins
 First WMAP bin is at detector pixel    1    1
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   1458.0     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.08790E+04
 Weighted mean angle from optical axis  = 14.134 arcmin
 


-> Standard Output From STOOL group_event_files:


1 ad87022000g300170h.evt 11028
1 ad87022000g300370m.evt 11028


-> GIS3_REGION256.4 already present in current directory

-> Extracting ad87022000g310170_0.pi from ad87022000g325670_0.reg and:


ad87022000g300170h.evt
ad87022000g300370m.evt


-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6421     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.73E+04     4607     1024
      2 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6421     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6421      6421              0         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4607      4607              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         11028     11028              0         0         0         0
   in  17813.     seconds
 Spectrum         has    11028 counts for 0.6191     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 17813.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.36783         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000g310170_0.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS3-PH > read events ad87022000g300370m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87022000g325670_0.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad87022000g310170_0.pi group=yes
Wrote spectrum to ad87022000g310170_0.pi
!xsel:ASCA-GIS3-PH > exit save_session=no


-> Deleting BLANK keyword from ad87022000g310170_0.pi

-> Correcting ad87022000g310170_0.pi for dead time

-> Standard Output From FTOOL deadtime:


... read all the files from deadlist.tmp


-> Grouping ad87022000g310170_0.pi to 40 counts/bin

-> Standard Output From FTOOL grppha:


 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 17411.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 0.36783         Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      21  are grouped by a factor       22
 ...        22 -      31  are grouped by a factor        2
 ...        32 -      52  are grouped by a factor        3
 ...        53 -      54  are grouped by a factor        2
 ...        55 -      57  are grouped by a factor        3
 ...        58 -      73  are grouped by a factor        2
 ...        74 -      76  are single channels
 ...        77 -      78  are grouped by a factor        2
 ...        79 -     145  are single channels
 ...       146 -     147  are grouped by a factor        2
 ...       148 -     157  are single channels
 ...       158 -     161  are grouped by a factor        2
 ...       162 -     162  are single channels
 ...       163 -     166  are grouped by a factor        2
 ...       167 -     169  are single channels
 ...       170 -     203  are grouped by a factor        2
 ...       204 -     206  are grouped by a factor        3
 ...       207 -     208  are grouped by a factor        2
 ...       209 -     226  are grouped by a factor        3
 ...       227 -     228  are grouped by a factor        2
 ...       229 -     231  are grouped by a factor        3
 ...       232 -     235  are grouped by a factor        4
 ...       236 -     250  are grouped by a factor        3
 ...       251 -     254  are grouped by a factor        4
 ...       255 -     259  are grouped by a factor        5
 ...       260 -     271  are grouped by a factor        4
 ...       272 -     274  are grouped by a factor        3
 ...       275 -     279  are grouped by a factor        5
 ...       280 -     287  are grouped by a factor        4
 ...       288 -     292  are grouped by a factor        5
 ...       293 -     300  are grouped by a factor        4
 ...       301 -     312  are grouped by a factor        6
 ...       313 -     322  are grouped by a factor        5
 ...       323 -     326  are grouped by a factor        4
 ...       327 -     331  are grouped by a factor        5
 ...       332 -     337  are grouped by a factor        6
 ...       338 -     342  are grouped by a factor        5
 ...       343 -     354  are grouped by a factor        6
 ...       355 -     375  are grouped by a factor        7
 ...       376 -     381  are grouped by a factor        6
 ...       382 -     388  are grouped by a factor        7
 ...       389 -     398  are grouped by a factor        5
 ...       399 -     404  are grouped by a factor        6
 ...       405 -     411  are grouped by a factor        7
 ...       412 -     419  are grouped by a factor        8
 ...       420 -     433  are grouped by a factor        7
 ...       434 -     441  are grouped by a factor        8
 ...       442 -     450  are grouped by a factor        9
 ...       451 -     460  are grouped by a factor       10
 ...       461 -     473  are grouped by a factor       13
 ...       474 -     485  are grouped by a factor       12
 ...       486 -     496  are grouped by a factor       11
 ...       497 -     509  are grouped by a factor       13
 ...       510 -     519  are grouped by a factor       10
 ...       520 -     535  are grouped by a factor       16
 ...       536 -     549  are grouped by a factor       14
 ...       550 -     565  are grouped by a factor       16
 ...       566 -     580  are grouped by a factor       15
 ...       581 -     605  are grouped by a factor       25
 ...       606 -     649  are grouped by a factor       22
 ...       650 -     668  are grouped by a factor       19
 ...       669 -     683  are grouped by a factor       15
 ...       684 -     700  are grouped by a factor       17
 ...       701 -     720  are grouped by a factor       20
 ...       721 -     780  are grouped by a factor       30
 ...       781 -     813  are grouped by a factor       33
 ...       814 -     842  are grouped by a factor       29
 ...       843 -     874  are grouped by a factor       32
 ...       875 -     907  are grouped by a factor       33
 ...       908 -     930  are grouped by a factor       23
 ...       931 -     960  are grouped by a factor       30
 ...       961 -    1018  are grouped by a factor       58
 ...      1019 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000g310170_0.pi
 ** grppha 2.9.0 completed successfully


-> Fetching gis3v4_0.rmf

-> Fetching s3bev1.fits

-> Fetching s3gridv3.fits

-> Generating ad87022000g310170_0.arf with point=no

-> Standard Output From FTOOL ascaarf:


ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size  177 by  178 bins
               expanded to  256 by  256 bins
 First WMAP bin is at detector pixel    1    1
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   1453.8     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 1.10280E+04
 Weighted mean angle from optical axis  = 14.110 arcmin
 


-> Plotting ad87022000g210170_0_pi.ps from ad87022000g210170_0.pi

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:03:36 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87022000g210170_0.pi;
 Net count rate (cts/s) for file   1  0.6254    +/-  5.9964E-03
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad87022000g210170_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit


-> Plotting ad87022000g310170_0_pi.ps from ad87022000g310170_0.pi

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:03:51 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87022000g310170_0.pi;
 Net count rate (cts/s) for file   1  0.6334    +/-  6.0324E-03
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad87022000g310170_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit


-> Plotting ad87022000s010102_0_pi.ps from ad87022000s010102_0.pi

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:04:06 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87022000s010102_0.pi;
 Net count rate (cts/s) for file   1  8.9509E-02+/-  2.3895E-03
   using response (RMF) file...       ad87022000s010102_0.rmf
   using auxiliary (ARF) file...      ad87022000s010102_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit


-> Plotting ad87022000s010212_0_pi.ps from ad87022000s010212_0.pi

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:04:22 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87022000s010212_0.pi;
 Net count rate (cts/s) for file   1  9.2408E-02+/-  2.4397E-03
   using response (RMF) file...       ad87022000s010212_0.rmf
   using auxiliary (ARF) file...      ad87022000s010212_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit


-> Plotting ad87022000s110102_0_pi.ps from ad87022000s110102_0.pi

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:04:39 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87022000s110102_0.pi;
 Net count rate (cts/s) for file   1  8.6382E-02+/-  2.4010E-03
   using response (RMF) file...       ad87022000s110102_0.rmf
   using auxiliary (ARF) file...      ad87022000s110102_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit


-> Plotting ad87022000s110212_0_pi.ps from ad87022000s110212_0.pi

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:04:56 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87022000s110212_0.pi;
 Net count rate (cts/s) for file   1  8.7969E-02+/-  2.3918E-03
   using response (RMF) file...       ad87022000s110212_0.rmf
   using auxiliary (ARF) file...      ad87022000s110212_0.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit





Extracting light curves (22:5:1)


-> Working on s0 mode 02

-> Extracting lightcurves from ad87022000s000102h.evt ad87022000s000202m.evt

-> Largest TIMEDEL=4.0000000E+00

-> Extracting ad87022000s032002_0.lc from full field of view

-> stdout output from extractor


extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad87022000s000102h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
            919       919              0         0         0         0
 Doing file: ad87022000s000202m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
            545       545              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1464      1464              0         0         0         0
   in  15864.     seconds
 Fits light curve has     1464 counts for 9.2282E-02 counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone


-> No files for s0 mode 03

-> Working on s1 mode 02

-> Extracting lightcurves from ad87022000s100102h.evt ad87022000s100202m.evt

-> Largest TIMEDEL=4.0000000E+00

-> Extracting ad87022000s132002_0.lc from full field of view

-> stdout output from extractor


extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad87022000s100102h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
            825       825              0         0         0         0
 Doing file: ad87022000s100202m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
            558       558              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1383      1383              0         0         0         0
   in  15744.     seconds
 Fits light curve has     1383 counts for 8.7842E-02 counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone


-> No files for s1 mode 03

-> Working on g2 mode 70

-> Extracting lightcurves from ad87022000g200170h.evt ad87022000g200370m.evt

-> Largest TIMEDEL=5.0000000E-01

-> Extracting ad87022000g225670_0.lc from full field of view

-> stdout output from extractor


extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad87022000g200170h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           6310      6310              0         0         0         0
 Doing file: ad87022000g200370m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           4569      4569              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         10879     10879              0         0         0         0
   in  17811.     seconds
 Fits light curve has    10879 counts for 0.6108     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone


-> No files for g2 mode 71

-> Working on g3 mode 70

-> Extracting lightcurves from ad87022000g300170h.evt ad87022000g300370m.evt

-> Largest TIMEDEL=5.0000000E-01

-> Extracting ad87022000g325670_0.lc from full field of view

-> stdout output from extractor


extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: ad87022000g300170h.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           6421      6421              0         0         0         0
 Doing file: ad87022000g300370m.evt
 10% completed
 20% completed
 30% completed
 40% completed
 50% completed
 60% completed
 70% completed
 80% completed
 90% completed
100% completed
          Total      Good    Bad: Region      Time     Phase       Cut
           4607      4607              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         11028     11028              0         0         0         0
   in  17813.     seconds
 Fits light curve has    11028 counts for 0.6191     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone


-> No files for g3 mode 71

-> Plotting all lightcurves

-> Plotting ad87022000g225670_0.lc in ad87022000g225670_0_lc.ps

-> stdout output from lcurve


 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87022000g225670_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ VIRGO_EAST_08       Start Time (d) .... 11353 02:03:29.036
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11353 14:07:45.036
 No. of Rows .......          215        Bin Time (s) ......    81.86
 Right Ascension ... 1.8802E+02          Internal time sys.. Converted to TJD
 Declination ....... 1.3705E+01          Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11353.08575273353  (days)       2: 3:29: 36  (h:m:s:ms)
 Expected Stop .... 11353.58871569649  (days)      14: 7:45: 36  (h:m:s:ms)
 
 Minimum Newbin Time    81.857411      (s)
 for Maximum Newbin No..              531
 
 Default Newbin Time is:   84.974580    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     84.974580      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       84.9746     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11353  2: 4:11
     Ser.1     Avg 0.6092        Chisq  225.6       Var 0.8560E-02 Newbs.    208
               Min 0.3909          Max  1.051    expVar 0.7567E-02  Bins    215
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad87022000g225670_0_lc.ps/ps
!PLT> LA File ad87022000g225670_0.lc
!PLT> plot
!PLT> quit


-> Plotting ad87022000g325670_0.lc in ad87022000g325670_0_lc.ps

-> stdout output from lcurve


 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87022000g325670_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ VIRGO_EAST_08       Start Time (d) .... 11353 02:03:29.036
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11353 14:07:45.036
 No. of Rows .......          222        Bin Time (s) ......    80.76
 Right Ascension ... 1.8802E+02          Internal time sys.. Converted to TJD
 Declination ....... 1.3705E+01          Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11353.08575273353  (days)       2: 3:29: 36  (h:m:s:ms)
 Expected Stop .... 11353.58871569649  (days)      14: 7:45: 36  (h:m:s:ms)
 
 Minimum Newbin Time    80.760498      (s)
 for Maximum Newbin No..              539
 
 Default Newbin Time is:   84.974580    (s) (to have 1 Intv. of     512 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     84.974580      (s)
 Maximum Newbin No.               512
 
 Default Newbins per Interval are:       512
 (giving       1 Interval of       512 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       512 Newbins of       84.9746     (s)
 
     512 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  6% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 13% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 19% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 26% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 33% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 39% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 46% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 53% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 59% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 66% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 73% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 79% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 86% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 93% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
 99% completed
100% completed
 
 Intv    1   Start 11353  2: 4:11
     Ser.1     Avg 0.6181        Chisq  281.2       Var 0.1096E-01 Newbs.    211
               Min 0.3352          Max  1.077    expVar 0.7781E-02  Bins    222
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad87022000g325670_0_lc.ps/ps
!PLT> LA File ad87022000g325670_0.lc
!PLT> plot
!PLT> quit


-> Plotting ad87022000s032002_0.lc in ad87022000s032002_0_lc.ps

-> stdout output from lcurve


 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87022000s032002_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ VIRGO_EAST_08       Start Time (d) .... 11353 02:12:33.036
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11353 14:06:09.036
 No. of Rows .......           31        Bin Time (s) ......    541.8
 Right Ascension ... 1.8802E+02          Internal time sys.. Converted to TJD
 Declination ....... 1.3705E+01          Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11353.09204902982  (days)       2:12:33: 36  (h:m:s:ms)
 Expected Stop .... 11353.58760458538  (days)      14: 6: 9: 36  (h:m:s:ms)
 
 Minimum Newbin Time    541.81602      (s)
 for Maximum Newbin No..               80
 
 Default Newbin Time is:   541.81602    (s) (to have 1 Intv. of      80 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     541.81602      (s)
 Maximum Newbin No.                80
 
 Default Newbins per Interval are:        80
 (giving       1 Interval of        80 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with        80 Newbins of       541.816     (s)
 
      80 analysis results per interval
 
  3% completed
  6% completed
  9% completed
 12% completed
 16% completed
 19% completed
 22% completed
 25% completed
 29% completed
 32% completed
 35% completed
 38% completed
 41% completed
 45% completed
 48% completed
 51% completed
 54% completed
 58% completed
 61% completed
 64% completed
 67% completed
 70% completed
 74% completed
 77% completed
 80% completed
 83% completed
 87% completed
 90% completed
 93% completed
 96% completed
100% completed
 
 Intv    1   Start 11353  2:17: 3
     Ser.1     Avg 0.9302E-01    Chisq  33.75       Var 0.2686E-03 Newbs.     31
               Min 0.6251E-01      Max 0.1465    expVar 0.2046E-03  Bins     31
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad87022000s032002_0_lc.ps/ps
!PLT> LA File ad87022000s032002_0.lc
!PLT> plot
!PLT> quit


-> Plotting ad87022000s132002_0.lc in ad87022000s132002_0_lc.ps

-> stdout output from lcurve


 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87022000s132002_0.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ VIRGO_EAST_08       Start Time (d) .... 11353 02:13:05.036
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11353 14:06:09.036
 No. of Rows .......           29        Bin Time (s) ......    569.2
 Right Ascension ... 1.8802E+02          Internal time sys.. Converted to TJD
 Declination ....... 1.3705E+01          Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11353.09241940019  (days)       2:13: 5: 36  (h:m:s:ms)
 Expected Stop .... 11353.58760458538  (days)      14: 6: 9: 36  (h:m:s:ms)
 
 Minimum Newbin Time    569.20096      (s)
 for Maximum Newbin No..               76
 
 Default Newbin Time is:   569.20096    (s) (to have 1 Intv. of      76 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     569.20096      (s)
 Maximum Newbin No.                76
 
 Default Newbins per Interval are:        76
 (giving       1 Interval of        76 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with        76 Newbins of       569.201     (s)
 
      76 analysis results per interval
 
  3% completed
  6% completed
 10% completed
 13% completed
 17% completed
 20% completed
 24% completed
 27% completed
 31% completed
 34% completed
 37% completed
 41% completed
 44% completed
 48% completed
 51% completed
 55% completed
 58% completed
 62% completed
 65% completed
 68% completed
 72% completed
 75% completed
 79% completed
 82% completed
 86% completed
 89% completed
 93% completed
 96% completed
100% completed
 
 Intv    1   Start 11353  2:17:49
     Ser.1     Avg 0.8818E-01    Chisq  35.27       Var 0.2667E-03 Newbs.     29
               Min 0.6149E-01      Max 0.1353    expVar 0.1843E-03  Bins     29
PLT> @lightcurve_plot_commands.tmp
!PLT> dev ad87022000s132002_0_lc.ps/ps
!PLT> LA File ad87022000s132002_0.lc
!PLT> plot
!PLT> quit


-> Creating GIS monitor count (HK) lightcurves

-> Creating a merged GTI file for g2

-> Making L1 light curve of ft990624_0151_1430G2HK.fits with irate=HIGH

-> stdout output from ghkcurve


ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  22583 output records from   22604  good input G2_L1    records.


-> Making L1 light curve of ft990624_0151_1430G2HK.fits with irate=HI+MED

-> stdout output from ghkcurve


ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  16417 output records from   29442  good input G2_L1    records.


-> Creating a merged GTI file for g3

-> Making L1 light curve of ft990624_0151_1430G3HK.fits with irate=HIGH

-> stdout output from ghkcurve


ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  21420 output records from   21441  good input G3_L1    records.


-> Making L1 light curve of ft990624_0151_1430G3HK.fits with irate=HI+MED

-> stdout output from ghkcurve


ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  16134 output records from   28187  good input G3_L1    records.





Extracting source event files (22:7:11)


-> Extracting unbinned light curve ad87022000g200170.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6310     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6310      6310              0         0         0         0
 Writing events file
   6310 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6310      6310              0         0         0         0
   in  10482.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87022000g225670_0.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad87022000g200170.ulc use_events=yes
Wrote events list to file ad87022000g200170.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no


-> Extracting unbinned light curve ad87022000g200370.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.73E+04     4569     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4569      4569              0         0         0         0
 Writing events file
   4569 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4569      4569              0         0         0         0
   in  7328.2     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g200370m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87022000g225670_0.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad87022000g200370.ulc use_events=yes
Wrote events list to file ad87022000g200370.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no


-> Extracting unbinned light curve ad87022000g300170.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.10E+05     6421     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6421      6421              0         0         0         0
 Writing events file
   6421 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6421      6421              0         0         0         0
   in  10484.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87022000g325670_0.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad87022000g300170.ulc use_events=yes
Wrote events list to file ad87022000g300170.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no


-> Extracting unbinned light curve ad87022000g300370.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.73E+04     4607     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           4607      4607              0         0         0         0
 Writing events file
   4607 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4607      4607              0         0         0         0
   in  7328.2     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g300370m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87022000g325670_0.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad87022000g300370.ulc use_events=yes
Wrote events list to file ad87022000g300370.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no


-> Extracting unbinned light curve ad87022000s000102.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:48    0.98E+04      919 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            919       919              0         0         0         0
 Writing events file
    919 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           919       919              0         0         0         0
   in  9840.5     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s000102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad87022000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad87022000s000102.ulc use_events=yes
Wrote events list to file ad87022000s000102.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no


-> Extracting unbinned light curve ad87022000s000112.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:48    0.98E+04      954 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            954       954              0         0         0         0
 Writing events file
    954 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           954       954              0         0         0         0
   in  9840.5     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s000112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87022000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad87022000s000112.ulc use_events=yes
Wrote events list to file ad87022000s000112.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no


-> Extracting unbinned light curve ad87022000s000202.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.60E+04      545 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            545       545              0         0         0         0
 Writing events file
    545 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           545       545              0         0         0         0
   in  6023.8     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s000202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad87022000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad87022000s000202.ulc use_events=yes
Wrote events list to file ad87022000s000202.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no


-> Extracting unbinned light curve ad87022000s000212.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.60E+04      562 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            562       562              0         0         0         0
 Writing events file
    562 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           562       562              0         0         0         0
   in  6023.8     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s000212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87022000s032002_0.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad87022000s000212.ulc use_events=yes
Wrote events list to file ad87022000s000212.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no


-> Extracting unbinned light curve ad87022000s100102.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:44    0.98E+04      825 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100102h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            825       825              0         0         0         0
 Writing events file
    825 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           825       825              0         0         0         0
   in  9784.3     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s100102h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad87022000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad87022000s100102.ulc use_events=yes
Wrote events list to file ad87022000s100102.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no


-> Extracting unbinned light curve ad87022000s100112.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:44    0.98E+04      848 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100112h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            848       848              0         0         0         0
 Writing events file
    848 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           848       848              0         0         0         0
   in  9784.3     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s100112h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87022000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad87022000s100112.ulc use_events=yes
Wrote events list to file ad87022000s100112.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no


-> Extracting unbinned light curve ad87022000s100202.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.60E+04      558 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100202m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            558       558              0         0         0         0
 Writing events file
    558 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           558       558              0         0         0         0
   in  5959.8     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s100202m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad87022000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad87022000s100202.ulc use_events=yes
Wrote events list to file ad87022000s100202.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no


-> Extracting unbinned light curve ad87022000s100212.ulc

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.60E+04      564 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100212m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
            564       564              0         0         0         0
 Writing events file
    564 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
           564       564              0         0         0         0
   in  5959.8     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000s100212m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87022000s132002_0.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad87022000s100212.ulc use_events=yes
Wrote events list to file ad87022000s100212.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87022000.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no





Extracting FRAME mode data (22:11:40)


-> Extracting FRAME mode data from ft990624_0151.1430

-> stdout output from tlmFrm


 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 9436

Total of 0 sets of frame data are extracted.


-> Extracting corner pixel histograms


-> Extracting corner pixels from ad87022000s000101h.unf

-> Calculating corner pixel GTI from ft990624_0151_1430.mkf

-> Extracting corner pixels from ad87022000s000201m.unf

-> Extracting corner pixels from ad87022000s000301l.unf

-> Extracting corner pixels from ad87022000s100101h.unf

-> Extracting corner pixels from ad87022000s100201m.unf

-> Extracting corner pixels from ad87022000s100301l.unf




Extracting GIS calibration source spectra (22:12:33)


-> Standard Output From STOOL group_event_files:


1 ad87022000g200170h.unf 70070
1 ad87022000g200270l.unf 70070
1 ad87022000g200370m.unf 70070


-> Group with the most counts: 1

-> Fetching GIS2_CALSRC256.2

-> Extracting ad87022000g220170.cal from ad87022000g200170h.unf ad87022000g200270l.unf ad87022000g200370m.unf

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    29197     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23719     1024
      2 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    29197     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    17154     1024
      2 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23719     1024
      3 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    29197     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29197      2413          26784         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200270l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23719      1430          22289         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17154      1424          15730         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         70070      5267          64803         0         0         0
   in  34866.     seconds
 Spectrum         has     5267 counts for 0.1511     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 34866.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS2-PH > read events ad87022000g200270l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS2-PH > read events ad87022000g200370m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad87022000g220170.cal group=yes
Wrote spectrum to ad87022000g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no


-> Deleting BLANK keyword from ad87022000g220170.cal

-> gis2v4_0.rmf already present in current directory

-> Plotting ad87022000g220170_cal.ps and finding peak

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:13:22 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad87022000g220170.cal;
 Net count rate (cts/s) for file   1  0.1511    +/-  2.0831E-03
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     4.5285212E+07 using    84 PHA bins.
 Reduced chi-squared =      595858.1     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     4.5285212E+07 using    84 PHA bins.
 Reduced chi-squared =      588119.6     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     4.5285212E+07 using    84 PHA bins.
 Reduced chi-squared =      580579.6     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      1726.623     using    84 PHA bins.
 Reduced chi-squared =      21.85599     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   279.730     -2         0.      2.6849E-03   6.054          0.
              5.2087E-02  8.9715E-03
   246.663     -3         0.      1.7470E-03   6.027          0.
              5.3576E-02  9.1580E-03
   245.745     -4         0.      2.4234E-03   6.004          0.
              5.3734E-02  9.9605E-03
   194.295     -5         0.      2.0654E-03   5.946          0.
              5.3006E-02  1.0957E-02
   191.648     -6         0.      2.1184E-03   5.945          0.
              5.1669E-02  1.3170E-02
   191.279     -7         0.      2.0552E-03   5.945          0.
              5.1671E-02  1.3074E-02
   191.278      1         0.      2.0556E-03   5.944          0.
              5.1672E-02  1.3074E-02
   141.891     -3         0.      2.0411E-03   5.941      9.7412E-02
              5.1931E-02  1.2637E-02
   90.1042     -4         0.      1.5192E-03   5.983      0.2005
              5.8379E-02  1.0312E-02
 Number of trials exceeded - last iteration delta =    51.79
   76.8830     -5         0.      1.8608E-03   6.005      0.1931
              6.1550E-02  7.4829E-03
   75.4164     -6         0.      1.6819E-03   6.000      0.1836
              6.0942E-02  7.9693E-03
   75.3625     -7         0.      1.8006E-03   6.000      0.1844
              6.1012E-02  7.8455E-03
   75.3096     -8         0.      1.7187E-03   6.000      0.1842
              6.1006E-02  7.8600E-03
   75.2884     -9         0.      1.7758E-03   6.000      0.1842
              6.1006E-02  7.8583E-03
   75.2772    -10         0.      1.7357E-03   6.000      0.1842
              6.1006E-02  7.8585E-03
   75.2718    -11         0.      1.7638E-03   6.000      0.1842
              6.1006E-02  7.8584E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 7.38E-08 | -0.99  0.00 -0.01 -0.03 -0.10
 6.34E-07 |  0.10 -0.06 -0.02 -0.11 -0.99
 2.00E-06 | -0.02 -0.04 -0.06  0.99 -0.11
 5.51E-05 |  0.01  0.83 -0.55  0.00 -0.04
 1.90E-04 |  0.00  0.55  0.83  0.07 -0.06
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.7638E-03 +/-  0.2927E-03
    3    3    2   gaussian/b LineE    keV        6.000     +/-  0.9753E-02
    4    4    2   gaussian/b Sigma    keV       0.1842     +/-  0.1219E-01
    5    5    2   gaussian/b norm               6.1006E-02 +/-  0.1681E-02
    6    3    3   gaussian/b LineE    keV        6.606     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1933     = par   4 *   1.049
    8    6    3   gaussian/b norm               7.8584E-03 +/-  0.1161E-02
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      75.27184     using    84 PHA bins.
 Reduced chi-squared =     0.9528080     for     79 degrees of freedom
 Null hypothesis probability = 0.598

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit


-> Calibration source ad87022000g220170.cal peaks at 6.000 +/- 0.009753 keV

-> Standard Output From STOOL group_event_files:


1 ad87022000g300170h.unf 67558
1 ad87022000g300270l.unf 67558
1 ad87022000g300370m.unf 67558


-> Group with the most counts: 1

-> Fetching GIS3_CALSRC256.2

-> Extracting ad87022000g320170.cal from ad87022000g300170h.unf ad87022000g300270l.unf ad87022000g300370m.unf

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    27568     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23780     1024
      2 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    27568     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    16210     1024
      2 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23780     1024
      3 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    27568     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          27568      1926          25642         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300270l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23780      1218          22562         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16210      1187          15023         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         67558      4331          63227         0         0         0
   in  34874.     seconds
 Spectrum         has     4331 counts for 0.1242     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 34874.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87022000g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA > read events ad87022000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS3-PH > read events ad87022000g300270l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS3-PH > read events ad87022000g300370m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad87022000g320170.cal group=yes
Wrote spectrum to ad87022000g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no


-> Deleting BLANK keyword from ad87022000g320170.cal

-> gis3v4_0.rmf already present in current directory

-> Plotting ad87022000g320170_cal.ps and finding peak

-> Standard Output From STOOL xspec:



               Xspec 11.00 22:14:19 23-Sep-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad87022000g320170.cal;
 Net count rate (cts/s) for file   1  0.1242    +/-  1.8908E-03
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     6.3730108E+07 using    84 PHA bins.
 Reduced chi-squared =      838554.1     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     6.3730108E+07 using    84 PHA bins.
 Reduced chi-squared =      827663.8     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     6.3730108E+07 using    84 PHA bins.
 Reduced chi-squared =      817052.7     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      1738.794     using    84 PHA bins.
 Reduced chi-squared =      22.01006     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   782.058     -3         0.      3.7792E-04   5.949      0.2730
              7.5507E-02  1.2913E-02
   279.129     -4         0.      2.6247E-03   5.891      0.1438
              4.8098E-02  1.2328E-02
   142.515     -5         0.      1.9821E-04   5.923      0.1502
              5.5559E-02  7.5464E-03
   142.172     -6         0.      2.1060E-03   5.917      0.1350
              5.5023E-02  7.7958E-03
   114.316     -7         0.      5.5333E-04   5.919      0.1368
              5.5190E-02  7.5919E-03
   110.214     -8         0.      1.7188E-03   5.919      0.1362
              5.5166E-02  7.6344E-03
   101.852     -9         0.      7.7870E-04   5.919      0.1363
              5.5170E-02  7.6255E-03
   99.6139    -10         0.      1.5011E-03   5.919      0.1363
              5.5169E-02  7.6272E-03
   96.8404    -11         0.      9.2187E-04   5.919      0.1363
              5.5169E-02  7.6269E-03
   95.8089    -12         0.      1.3726E-03   5.919      0.1363
              5.5169E-02  7.6270E-03
 Number of trials exceeded - last iteration delta =    1.031
   94.8304    -13         0.      1.0128E-03   5.919      0.1363
              5.5169E-02  7.6269E-03
   94.3872    -14         0.      1.2947E-03   5.919      0.1363
              5.5169E-02  7.6269E-03
   94.0285    -15         0.      1.0704E-03   5.919      0.1363
              5.5169E-02  7.6270E-03
   93.8452    -16         0.      1.2468E-03   5.919      0.1363
              5.5169E-02  7.6269E-03
   93.7105    -17         0.      1.1067E-03   5.919      0.1363
              5.5169E-02  7.6270E-03
   93.6363    -18         0.      1.2171E-03   5.919      0.1363
              5.5169E-02  7.6269E-03
   93.5850    -19         0.      1.1296E-03   5.919      0.1363
              5.5169E-02  7.6270E-03
   93.5554    -20         0.      1.1986E-03   5.919      0.1363
              5.5169E-02  7.6269E-03
   93.5356    -21         0.      1.1439E-03   5.919      0.1363
              5.5169E-02  7.6270E-03
   93.5239    -22         0.      1.1871E-03   5.919      0.1363
              5.5169E-02  7.6269E-03
 Number of trials exceeded - last iteration delta =   1.1757E-02
   93.5163    -23         0.      1.1529E-03   5.919      0.1363
              5.5169E-02  7.6269E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 5.76E-08 | -1.00  0.00 -0.01 -0.03 -0.08
 5.18E-07 |  0.08 -0.05 -0.02 -0.08 -0.99
 1.76E-06 | -0.02 -0.04 -0.04  0.99 -0.08
 4.91E-05 |  0.00  0.92 -0.39  0.02 -0.04
 1.54E-04 |  0.00  0.38  0.92  0.05 -0.04
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.1529E-03 +/-  0.2541E-03
    3    3    2   gaussian/b LineE    keV        5.919     +/-  0.8017E-02
    4    4    2   gaussian/b Sigma    keV       0.1363     +/-  0.1175E-01
    5    5    2   gaussian/b norm               5.5169E-02 +/-  0.1469E-02
    6    3    3   gaussian/b LineE    keV        6.516     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1430     = par   4 *   1.049
    8    6    3   gaussian/b norm               7.6269E-03 +/-  0.9060E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      93.51627     using    84 PHA bins.
 Reduced chi-squared =      1.183750     for     79 degrees of freedom
 Null hypothesis probability = 0.126

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit


-> Calibration source ad87022000g320170.cal peaks at 5.919 +/- 0.008017 keV




Extracting bright and dark Earth event files. (22:14:25)


-> Extracting bright and dark Earth events from ad87022000s000102h.unf

-> Extracting ad87022000s000102h.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:48    0.17E+05    13823 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          13823       722              0     13101         0         0
 Writing events file
    722 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         13823       722              0     13101         0         0
   in  951.84     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s000102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no


-> Cleaning hot pixels from ad87022000s000102h.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s000102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          722
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3         602
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :          722
 Number of image cts rejected (N, %) :          60283.38
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0          722            0            0
 Image cts rejected:             0          602            0            0
 Image cts rej (%) :          0.00        83.38         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          722            0            0
 Total cts rejected:             0          602            0            0
 Total cts rej (%) :          0.00        83.38         0.00         0.00
 
 Number of clean counts accepted  :          120
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s000112h.unf

-> Extracting ad87022000s000112h.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:48    0.17E+05    14021 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14021       731              0     13290         0         0
 Writing events file
    731 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14021       731              0     13290         0         0
   in  951.84     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s000112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no


-> Cleaning hot pixels from ad87022000s000112h.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s000112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          731
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3         602
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :          731
 Number of image cts rejected (N, %) :          60282.35
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0          731            0            0
 Image cts rejected:             0          602            0            0
 Image cts rej (%) :          0.00        82.35         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          731            0            0
 Total cts rejected:             0          602            0            0
 Total cts rej (%) :          0.00        82.35         0.00         0.00
 
 Number of clean counts accepted  :          129
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s000202m.unf

-> Extracting ad87022000s000202m.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.10E+05     7904 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           7904        80              0      7824         0         0
 Writing events file
     80 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          7904        80              0      7824         0         0
   in  111.51     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s000202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no


-> Cleaning hot pixels from ad87022000s000202m.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s000202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           80
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3          72
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :           80
 Number of image cts rejected (N, %) :           7290.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0           80            0            0
 Image cts rejected:             0           72            0            0
 Image cts rej (%) :          0.00        90.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0           80            0            0
 Total cts rejected:             0           72            0            0
 Total cts rej (%) :          0.00        90.00         0.00         0.00
 
 Number of clean counts accepted  :            8
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s000212m.unf

-> Extracting ad87022000s000212m.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.10E+05     8023 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000212m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           8023        83              0      7940         0         0
 Writing events file
     83 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          8023        83              0      7940         0         0
   in  111.51     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s000212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no


-> Cleaning hot pixels from ad87022000s000212m.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s000212m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           83
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3          72
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :           83
 Number of image cts rejected (N, %) :           7286.75
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0           83            0            0
 Image cts rejected:             0           72            0            0
 Image cts rej (%) :          0.00        86.75         0.00         0.00
 
    filtering data...
 
 Total counts      :             0           83            0            0
 Total cts rejected:             0           72            0            0
 Total cts rej (%) :          0.00        86.75         0.00         0.00
 
 Number of clean counts accepted  :           11
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s000302l.unf

-> Extracting ad87022000s000302l.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT      LOW         1999-06-24  03:02:00    0.12E+05     3669 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3669      1824              0      1845         0         0
 Writing events file
   1824 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3669      1824              0      1845         0         0
   in  2409.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s000302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no


-> Cleaning hot pixels from ad87022000s000302l.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s000302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1824
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        1511
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :         1824
 Number of image cts rejected (N, %) :         151182.84
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0         1824            0            0
 Image cts rejected:             0         1511            0            0
 Image cts rej (%) :          0.00        82.84         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1824            0            0
 Total cts rejected:             0         1511            0            0
 Total cts rej (%) :          0.00        82.84         0.00         0.00
 
 Number of clean counts accepted  :          313
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s000312l.unf

-> Extracting ad87022000s000312l.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 VIRGO_EAST_ BRIGHT2     LOW         1999-06-24  03:02:00    0.12E+05     3729 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s000312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           3729      1852              0      1877         0         0
 Writing events file
   1852 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3729      1852              0      1877         0         0
   in  2409.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s000312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no


-> Cleaning hot pixels from ad87022000s000312l.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s000312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1852
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               3        1511
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :         1852
 Number of image cts rejected (N, %) :         151181.59
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            3            0            0
 
 Image counts      :             0         1852            0            0
 Image cts rejected:             0         1511            0            0
 Image cts rej (%) :          0.00        81.59         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1852            0            0
 Total cts rejected:             0         1511            0            0
 Total cts rej (%) :          0.00        81.59         0.00         0.00
 
 Number of clean counts accepted  :          341
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s100102h.unf

-> Extracting ad87022000s100102h.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      HIGH        1999-06-24  04:31:44    0.17E+05    17568 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100102h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17568       814              0     16754         0         0
 Writing events file
    814 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17568       814              0     16754         0         0
   in  951.84     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s100102h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no


-> Cleaning hot pixels from ad87022000s100102h.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s100102h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          814
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               3         712
 Flickering pixels iter, pixels & cnts :   1           1           7
 
 Number of pixels rejected           :            4
 Number of (internal) image counts   :          814
 Number of image cts rejected (N, %) :          71988.33
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            4
 
 Image counts      :             0            0            0          814
 Image cts rejected:             0            0            0          719
 Image cts rej (%) :          0.00         0.00         0.00        88.33
 
    filtering data...
 
 Total counts      :             0            0            0          814
 Total cts rejected:             0            0            0          719
 Total cts rej (%) :          0.00         0.00         0.00        88.33
 
 Number of clean counts accepted  :           95
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            4
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s100112h.unf

-> Extracting ad87022000s100112h.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     HIGH        1999-06-24  04:31:44    0.17E+05    17672 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100112h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17672       819              0     16853         0         0
 Writing events file
    819 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17672       819              0     16853         0         0
   in  951.84     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s100112h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no


-> Cleaning hot pixels from ad87022000s100112h.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s100112h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          819
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               3         712
 Flickering pixels iter, pixels & cnts :   1           1           7
 
 Number of pixels rejected           :            4
 Number of (internal) image counts   :          819
 Number of image cts rejected (N, %) :          71987.79
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            4
 
 Image counts      :             0            0            0          819
 Image cts rejected:             0            0            0          719
 Image cts rej (%) :          0.00         0.00         0.00        87.79
 
    filtering data...
 
 Total counts      :             0            0            0          819
 Total cts rejected:             0            0            0          719
 Total cts rej (%) :          0.00         0.00         0.00        87.79
 
 Number of clean counts accepted  :          100
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            4
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s100202m.unf

-> Extracting ad87022000s100202m.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      MEDIUM      1999-06-24  01:51:36    0.10E+05     9523 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100202m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9523        94              0      9429         0         0
 Writing events file
     94 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9523        94              0      9429         0         0
   in  111.51     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s100202m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no


-> Cleaning hot pixels from ad87022000s100202m.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s100202m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           94
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               3          83
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :           94
 Number of image cts rejected (N, %) :           8388.30
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            3
 
 Image counts      :             0            0            0           94
 Image cts rejected:             0            0            0           83
 Image cts rej (%) :          0.00         0.00         0.00        88.30
 
    filtering data...
 
 Total counts      :             0            0            0           94
 Total cts rejected:             0            0            0           83
 Total cts rej (%) :          0.00         0.00         0.00        88.30
 
 Number of clean counts accepted  :           11
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s100212m.unf

-> Extracting ad87022000s100212m.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     MEDIUM      1999-06-24  01:51:36    0.10E+05     9578 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100212m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9578        94              0      9484         0         0
 Writing events file
     94 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9578        94              0      9484         0         0
   in  111.51     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s100212m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no


-> Cleaning hot pixels from ad87022000s100212m.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s100212m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :           94
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               3          83
 
 Number of pixels rejected           :            3
 Number of (internal) image counts   :           94
 Number of image cts rejected (N, %) :           8388.30
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            3
 
 Image counts      :             0            0            0           94
 Image cts rejected:             0            0            0           83
 Image cts rej (%) :          0.00         0.00         0.00        88.30
 
    filtering data...
 
 Total counts      :             0            0            0           94
 Total cts rejected:             0            0            0           83
 Total cts rej (%) :          0.00         0.00         0.00        88.30
 
 Number of clean counts accepted  :           11
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            3
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s100302l.unf

-> Extracting ad87022000s100302l.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT      LOW         1999-06-24  03:02:00    0.12E+05     7671 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100302l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           7671      1900              0      5771         0         0
 Writing events file
   1900 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          7671      1900              0      5771         0         0
   in  2409.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s100302l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no


-> Cleaning hot pixels from ad87022000s100302l.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s100302l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1900
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4        1615
 Flickering pixels iter, pixels & cnts :   1           2          14
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         1900
 Number of image cts rejected (N, %) :         162985.74
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         1900
 Image cts rejected:             0            0            0         1629
 Image cts rej (%) :          0.00         0.00         0.00        85.74
 
    filtering data...
 
 Total counts      :             0            0            0         1900
 Total cts rejected:             0            0            0         1629
 Total cts rej (%) :          0.00         0.00         0.00        85.74
 
 Number of clean counts accepted  :          271
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000s100312l.unf

-> Extracting ad87022000s100312l.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 VIRGO_EAST_ BRIGHT2     LOW         1999-06-24  03:02:00    0.12E+05     7704 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000s100312l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           7704      1910              0      5794         0         0
 Writing events file
   1910 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          7704      1910              0      5794         0         0
   in  2409.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000s100312l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no


-> Cleaning hot pixels from ad87022000s100312l.unf

-> Standard Output From FTOOL cleansis:


CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87022000s100312l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1910
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               4        1615
 Flickering pixels iter, pixels & cnts :   1           2          14
 
 Number of pixels rejected           :            6
 Number of (internal) image counts   :         1910
 Number of image cts rejected (N, %) :         162985.29
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            6
 
 Image counts      :             0            0            0         1910
 Image cts rejected:             0            0            0         1629
 Image cts rej (%) :          0.00         0.00         0.00        85.29
 
    filtering data...
 
 Total counts      :             0            0            0         1910
 Total cts rejected:             0            0            0         1629
 Total cts rej (%) :          0.00         0.00         0.00        85.29
 
 Number of clean counts accepted  :          281
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            6
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...


-> Extracting bright and dark Earth events from ad87022000g200170h.unf

-> Extracting ad87022000g200170h.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    29197     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29197       605              0     28592         0         0
 Writing events file
    605 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         29197       605              0     28592         0         0
   in  959.96     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no


-> Extracting ad87022000g200170h.brt

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    29197     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          29197      9319              0     19878         0         0
 Writing events file
   9319 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         29197      9319              0     19878         0         0
   in  1129.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no


-> Extracting bright and dark Earth events from ad87022000g200270l.unf

-> Extracting ad87022000g200270l.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23719     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200270l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23719      1370              0     22349         0         0
 Writing events file
   1370 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23719      1370              0     22349         0         0
   in  2048.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g200270l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no


-> Extracting ad87022000g200270l.brt

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23719     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200270l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23719     22097              0      1622         0         0
 Writing events file
  22097 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23719     22097              0      1622         0         0
   in  6911.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g200270l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no


-> Extracting bright and dark Earth events from ad87022000g200370m.unf

-> Extracting ad87022000g200370m.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    17154     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17154       114              0     17040         0         0
 Writing events file
    114 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17154       114              0     17040         0         0
   in  127.76     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g200370m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no


-> Extracting ad87022000g200370m.brt

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    17154     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g200370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17154      5684              0     11470         0         0
 Writing events file
   5684 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17154      5684              0     11470         0         0
   in  624.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g200370m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no


-> Extracting bright and dark Earth events from ad87022000g300170h.unf

-> Extracting ad87022000g300170h.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    27568     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          27568       547              0     27021         0         0
 Writing events file
    547 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         27568       547              0     27021         0         0
   in  959.96     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no


-> Extracting ad87022000g300170h.brt

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          HIGH        1999-06-24  04:31:55    0.16E+05    27568     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          27568      9419              0     18149         0         0
 Writing events file
   9419 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         27568      9419              0     18149         0         0
   in  1129.9     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no


-> Extracting bright and dark Earth events from ad87022000g300270l.unf

-> Extracting ad87022000g300270l.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23780     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300270l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23780      1291              0     22489         0         0
 Writing events file
   1291 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23780      1291              0     22489         0         0
   in  2048.4     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g300270l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no


-> Extracting ad87022000g300270l.brt

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          LOW         1999-06-24  03:04:17    0.90E+04    23780     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300270l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          23780     22229              0      1551         0         0
 Writing events file
  22229 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         23780     22229              0      1551         0         0
   in  6911.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g300270l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no


-> Extracting bright and dark Earth events from ad87022000g300370m.unf

-> Extracting ad87022000g300370m.drk

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    16210     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16210        76              0     16134         0         0
 Writing events file
     76 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16210        76              0     16134         0         0
   in  127.76     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g300370m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no


-> Extracting ad87022000g300370m.brt

-> Standard Output From FTOOL xselect:


 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 VIRGO_EAST_ PH          MEDIUM      1999-06-24  01:51:45    0.95E+04    16210     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87022000.003/ad87022000g300370m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16210      5656              0     10554         0         0
 Writing events file
   5656 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16210      5656              0     10554         0         0
   in  624.00     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87022000.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA > read events ad87022000g300370m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87022000.003/
HK Directory is: /data/data23/seq_proc/ad0_87022000.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no





Determining information about this observation (22:25:51)


-> Calculating ISAS time for sis

-> Calculating ISAS time for gis

-> Recording dates of PI calibration files

-> leapsec.fits is already present in the working directory

-> leapsec.fits is already present in the working directory

-> leapsec.fits is already present in the working directory

-> leapsec.fits is already present in the working directory

-> leapsec.fits is already present in the working directory

-> leapsec.fits is already present in the working directory




Generating event file information page (22:26:59)


-> Summing time and events for s0 event files

-> listing ad87022000s000102h.unf

-> listing ad87022000s000202m.unf

-> listing ad87022000s000302l.unf

-> listing ad87022000s000112h.unf

-> listing ad87022000s000212m.unf

-> listing ad87022000s000312l.unf

-> listing ad87022000s000101h.unf

-> listing ad87022000s000201m.unf

-> listing ad87022000s000301l.unf

-> Summing time and events for s1 event files

-> listing ad87022000s100102h.unf

-> listing ad87022000s100202m.unf

-> listing ad87022000s100302l.unf

-> listing ad87022000s100112h.unf

-> listing ad87022000s100212m.unf

-> listing ad87022000s100312l.unf

-> listing ad87022000s100101h.unf

-> listing ad87022000s100201m.unf

-> listing ad87022000s100301l.unf

-> Summing time and events for g2 event files

-> listing ad87022000g200170h.unf

-> listing ad87022000g200370m.unf

-> listing ad87022000g200270l.unf

-> Summing time and events for g3 event files

-> listing ad87022000g300170h.unf

-> listing ad87022000g300370m.unf

-> listing ad87022000g300270l.unf




Creating HTML header page (22:32:13)





Creating HTML source list (22:32:50)





Doing final wrapup of all files (22:32:59)


-> Copying job.par to ad87022000_003_job.par

-> Copying ad0.par to ad87022000_003_process.par

-> Creating ad87022000_tape.cat

-> Creating ad87022000_trend.cat

-> Creating ad87022000_003_file_info.html

-> Calculating site-independant checksums

-> Site independant checksum: 61502

-> Updating FITS checksum keywords

-> Running fverify on all FITS files




Processing complete (22:53:56)