Processing Job Log for Sequence 87044010, version 003

This is the complete and detailed record of how this sequence was processed.

The following information is also available:

Processing started (17:59:0)

Checking input files for validity (17:59:2)

-> Verifying the input files
-> FITS file ft990813_1052.0445 exists
-> FITS file ad87044010_input.cat exists
-> FITS file fa990813_1052.0445 exists
-> Calculating Observation start and end times
-> Fetching leapsec.fits from /aps/calibration
-> leapsec.fits is already present in the working directory
-> Observation begins 2.0869514E+08 = 1999-08-13 10:52:16
-> Observation ends 2.0875955E+08 = 1999-08-14 04:45:46

Determine nominal pointing (17:59:10)

-> Checking fa990813_1052.0445 for problems
-> Fetching asca_mean_1999-04-23.fits from /aps/calibration
-> stdout output from aspect
Spacecraft Euler Angles: Phi=41.06209 Theta=143.10204 Psi=0.34006
Telescope pointing: R.A.=41.47840 Dec=-52.96739 Roll=270.67270 degrees
-> Nominal spacecraft Euler angles: Phi=41.062091161623 Theta=143.10203656141 Psi=0.34006437964914
-> Nominal telescope pointing: R.A.=41.478404419408 Dec=-52.967385609178 Roll Angle=270.67269941368
-> Galactic Coordinates: Lii=271.358456 Bii=-56.567330

Running frfread on telemetry files (17:59:22)

-> Running frfread on ft990813_1052.0445
-> stdout output from frfread4
91.9997 second gap between superframes 377 and 378
Dropping SF 690 with inconsistent datamode 0/31
1.99999 second gap between superframes 1758 and 1759
Dropping SF 2692 with inconsistent SIS mode 2/1
Dropping SF 2693 with inconsistent SIS ID
Dropping SF 2694 with corrupted frame indicator
Dropping SF 2848 with invalid bit rate 7
GIS2 coordinate error time=208715526.74834 x=0 y=0 pha=288 rise=0
Dropping SF 2852 with inconsistent SIS ID
Dropping SF 2856 with inconsistent datamode 0/31
Dropping SF 2862 with corrupted frame indicator
Dropping SF 3035 with corrupted frame indicator
Dropping SF 3037 with corrupted frame indicator
Dropping SF 3038 with corrupted frame indicator
25.9999 second gap between superframes 3039 and 3040
Dropped 1st C0 read after clocking change in ft990813_1052_0445S002601H.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S002601H.fits
Dropped 1st C2 read after clocking change in ft990813_1052_0445S002601H.fits
Dropped 1st C2 read after clocking change in ft990813_1052_0445S102601H.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S002601H.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S102601H.fits
Dropped 1st C0 read after clocking change in ft990813_1052_0445S102601H.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S102601H.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S002801H.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S102801H.fits
87.9997 second gap between superframes 4949 and 4950
Warning: GIS2 bit assignment changed between 208721346.97203 and 208721348.97202
Warning: GIS3 bit assignment changed between 208721358.97199 and 208721360.97199
Warning: GIS2 bit assignment changed between 208721366.97197 and 208721368.97196
Warning: GIS3 bit assignment changed between 208721374.97195 and 208721376.97194
Dropping SF 5280 with inconsistent datamode 0/31
Dropping SF 5281 with inconsistent datamode 26/0
Dropping SF 5283 with inconsistent datamode 0/31
Dropped 1st C0 read after clocking change in ft990813_1052_0445S003201L.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S003201L.fits
Dropped 1st C2 read after clocking change in ft990813_1052_0445S103201L.fits
Dropped 1st C2 read after clocking change in ft990813_1052_0445S003201L.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S103201L.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S003201L.fits
Dropped 1st C0 read after clocking change in ft990813_1052_0445S103201L.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S103201L.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S003501H.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S103501H.fits
Dropping SF 7176 with invalid bit rate 7
Dropping SF 7467 with inconsistent datamode 0/31
SIS1 coordinate error time=208745544.77465 x=0 y=0 pha[0]=192 chip=0
FAINT event CCD=0, but using exposure CCD=3 time=208745544.77465
605.998 second gap between superframes 9291 and 9292
Dropped 1st C0 read after clocking change in ft990813_1052_0445S004901H.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S004901H.fits
Dropped 1st C2 read after clocking change in ft990813_1052_0445S104901H.fits
Dropped 1st C2 read after clocking change in ft990813_1052_0445S004901H.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S104901H.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S004901H.fits
Dropped 1st C0 read after clocking change in ft990813_1052_0445S104901H.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S104901H.fits
Dropped 1st C1 read after clocking change in ft990813_1052_0445S005101H.fits
Dropped 1st C3 read after clocking change in ft990813_1052_0445S105101H.fits
607.998 second gap between superframes 11209 and 11210
Dropping SF 12109 with corrupted frame indicator
13041 of 13058 super frames processed
-> 0% of superframes in ft990813_1052.0445 corrupted
-> Deleting the following files with NEVENTS=0
ft990813_1052_0445G200170M.fits
ft990813_1052_0445G200270L.fits
ft990813_1052_0445G200370L.fits
ft990813_1052_0445G201070M.fits
ft990813_1052_0445G201170L.fits
ft990813_1052_0445G201270L.fits
ft990813_1052_0445G201370M.fits
ft990813_1052_0445G201470M.fits
ft990813_1052_0445G201570M.fits
ft990813_1052_0445G202170H.fits
ft990813_1052_0445G202270H.fits
ft990813_1052_0445G202370L.fits
ft990813_1052_0445G202470M.fits
ft990813_1052_0445G203270H.fits
ft990813_1052_0445G203370H.fits
ft990813_1052_0445G203470L.fits
ft990813_1052_0445G203970H.fits
ft990813_1052_0445G204070H.fits
ft990813_1052_0445G204170M.fits
ft990813_1052_0445G204270H.fits
ft990813_1052_0445G204870H.fits
ft990813_1052_0445G204970H.fits
ft990813_1052_0445G205070H.fits
ft990813_1052_0445G205170H.fits
ft990813_1052_0445G205770H.fits
ft990813_1052_0445G205870H.fits
ft990813_1052_0445G205970L.fits
ft990813_1052_0445G206070L.fits
ft990813_1052_0445G206170H.fits
ft990813_1052_0445G206670M.fits
ft990813_1052_0445G206770L.fits
ft990813_1052_0445G207070M.fits
ft990813_1052_0445G207170L.fits
ft990813_1052_0445G207270L.fits
ft990813_1052_0445G300170M.fits
ft990813_1052_0445G300270L.fits
ft990813_1052_0445G300370L.fits
ft990813_1052_0445G301070M.fits
ft990813_1052_0445G301170L.fits
ft990813_1052_0445G301270L.fits
ft990813_1052_0445G301370M.fits
ft990813_1052_0445G301470M.fits
ft990813_1052_0445G301570M.fits
ft990813_1052_0445G302170H.fits
ft990813_1052_0445G302270H.fits
ft990813_1052_0445G302370L.fits
ft990813_1052_0445G302470M.fits
ft990813_1052_0445G303270H.fits
ft990813_1052_0445G303370H.fits
ft990813_1052_0445G303470L.fits
ft990813_1052_0445G303970H.fits
ft990813_1052_0445G304070H.fits
ft990813_1052_0445G304170M.fits
ft990813_1052_0445G304270H.fits
ft990813_1052_0445G304370H.fits
ft990813_1052_0445G305070H.fits
ft990813_1052_0445G305170H.fits
ft990813_1052_0445G305270H.fits
ft990813_1052_0445G305370H.fits
ft990813_1052_0445G305870H.fits
ft990813_1052_0445G305970H.fits
ft990813_1052_0445G306070L.fits
ft990813_1052_0445G306170L.fits
ft990813_1052_0445G306270H.fits
ft990813_1052_0445G306370H.fits
ft990813_1052_0445G306470H.fits
ft990813_1052_0445G306770M.fits
ft990813_1052_0445G306870L.fits
ft990813_1052_0445G307170M.fits
ft990813_1052_0445G307270L.fits
ft990813_1052_0445G307370L.fits
ft990813_1052_0445S000101M.fits
ft990813_1052_0445S100101M.fits
-> merging GTIs for s0 990813_1052.0445
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990813_1052_0445S0HK.fits
-> Total ONTIME for s0 990813_1052.0445 = 59479.8
-> merging GTIs for s1 990813_1052.0445
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990813_1052_0445S1HK.fits
-> Total ONTIME for s1 990813_1052.0445 = 59487.8
-> merging GTIs for g2 990813_1052.0445
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990813_1052_0445G2HK.fits
-> Total ONTIME for g2 990813_1052.0445 = 49677.9
-> merging GTIs for g3 990813_1052.0445
-> sorting GTIs and removing invalid rows
-> Appending merged GTIs to ft990813_1052_0445G3HK.fits
-> Total ONTIME for g3 990813_1052.0445 = 49675.9

Merging event files from frfread (18:5:51)

-> Grouping s0 event files
-> stdout output from group_event_files
1 ft990813_1052_0445S000401M.fits 63317
1 ft990813_1052_0445S000601M.fits 63317
1 ft990813_1052_0445S000901M.fits 63317
1 ft990813_1052_0445S001401M.fits 63317
1 ft990813_1052_0445S001601M.fits 63317
1 ft990813_1052_0445S002201M.fits 63317
1 ft990813_1052_0445S002401M.fits 63317
1 ft990813_1052_0445S003801M.fits 63317
1 ft990813_1052_0445S004001M.fits 63317
1 ft990813_1052_0445S004201M.fits 63317
1 ft990813_1052_0445S004401M.fits 63317
1 ft990813_1052_0445S004701M.fits 63317
1 ft990813_1052_0445S005201M.fits 63317
2 ft990813_1052_0445S001001H.fits 59509
2 ft990813_1052_0445S001701H.fits 59509
2 ft990813_1052_0445S002101H.fits 59509
2 ft990813_1052_0445S002501H.fits 59509
2 ft990813_1052_0445S002801H.fits 59509
2 ft990813_1052_0445S003501H.fits 59509
2 ft990813_1052_0445S003601H.fits 59509
2 ft990813_1052_0445S003701H.fits 59509
2 ft990813_1052_0445S004601H.fits 59509
2 ft990813_1052_0445S004801H.fits 59509
2 ft990813_1052_0445S005101H.fits 59509
3 ft990813_1052_0445S002601H.fits 48896
3 ft990813_1052_0445S002701H.fits 48896
3 ft990813_1052_0445S003301H.fits 48896
3 ft990813_1052_0445S003401H.fits 48896
3 ft990813_1052_0445S004901H.fits 48896
3 ft990813_1052_0445S005001H.fits 48896
4 ft990813_1052_0445S000301L.fits 19103
4 ft990813_1052_0445S000501L.fits 19103
4 ft990813_1052_0445S000801L.fits 19103
4 ft990813_1052_0445S001101L.fits 19103
4 ft990813_1052_0445S001301L.fits 19103
4 ft990813_1052_0445S001501L.fits 19103
4 ft990813_1052_0445S001801L.fits 19103
4 ft990813_1052_0445S002001L.fits 19103
4 ft990813_1052_0445S002901L.fits 19103
4 ft990813_1052_0445S003101L.fits 19103
4 ft990813_1052_0445S003901L.fits 19103
4 ft990813_1052_0445S004101L.fits 19103
4 ft990813_1052_0445S004301L.fits 19103
4 ft990813_1052_0445S004501L.fits 19103
5 ft990813_1052_0445S000201L.fits 285
5 ft990813_1052_0445S000701L.fits 285
5 ft990813_1052_0445S001201L.fits 285
5 ft990813_1052_0445S001901L.fits 285
5 ft990813_1052_0445S003001L.fits 285
6 ft990813_1052_0445S003201L.fits 72
7 ft990813_1052_0445S002301M.fits 18
-> Creating ad87044010s000101m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  13  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 13 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S000401M.fits 
 2 -- ft990813_1052_0445S000601M.fits 
 3 -- ft990813_1052_0445S000901M.fits 
 4 -- ft990813_1052_0445S001401M.fits 
 5 -- ft990813_1052_0445S001601M.fits 
 6 -- ft990813_1052_0445S002201M.fits 
 7 -- ft990813_1052_0445S002401M.fits 
 8 -- ft990813_1052_0445S003801M.fits 
 9 -- ft990813_1052_0445S004001M.fits 
 10 -- ft990813_1052_0445S004201M.fits 
 11 -- ft990813_1052_0445S004401M.fits 
 12 -- ft990813_1052_0445S004701M.fits 
 13 -- ft990813_1052_0445S005201M.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S000401M.fits 
 2 -- ft990813_1052_0445S000601M.fits 
 3 -- ft990813_1052_0445S000901M.fits 
 4 -- ft990813_1052_0445S001401M.fits 
 5 -- ft990813_1052_0445S001601M.fits 
 6 -- ft990813_1052_0445S002201M.fits 
 7 -- ft990813_1052_0445S002401M.fits 
 8 -- ft990813_1052_0445S003801M.fits 
 9 -- ft990813_1052_0445S004001M.fits 
 10 -- ft990813_1052_0445S004201M.fits 
 11 -- ft990813_1052_0445S004401M.fits 
 12 -- ft990813_1052_0445S004701M.fits 
 13 -- ft990813_1052_0445S005201M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010s000201h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  11  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 11 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S001001H.fits 
 2 -- ft990813_1052_0445S001701H.fits 
 3 -- ft990813_1052_0445S002101H.fits 
 4 -- ft990813_1052_0445S002501H.fits 
 5 -- ft990813_1052_0445S002801H.fits 
 6 -- ft990813_1052_0445S003501H.fits 
 7 -- ft990813_1052_0445S003601H.fits 
 8 -- ft990813_1052_0445S003701H.fits 
 9 -- ft990813_1052_0445S004601H.fits 
 10 -- ft990813_1052_0445S004801H.fits 
 11 -- ft990813_1052_0445S005101H.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S001001H.fits 
 2 -- ft990813_1052_0445S001701H.fits 
 3 -- ft990813_1052_0445S002101H.fits 
 4 -- ft990813_1052_0445S002501H.fits 
 5 -- ft990813_1052_0445S002801H.fits 
 6 -- ft990813_1052_0445S003501H.fits 
 7 -- ft990813_1052_0445S003601H.fits 
 8 -- ft990813_1052_0445S003701H.fits 
 9 -- ft990813_1052_0445S004601H.fits 
 10 -- ft990813_1052_0445S004801H.fits 
 11 -- ft990813_1052_0445S005101H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010s000301h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S002601H.fits 
 2 -- ft990813_1052_0445S002701H.fits 
 3 -- ft990813_1052_0445S003301H.fits 
 4 -- ft990813_1052_0445S003401H.fits 
 5 -- ft990813_1052_0445S004901H.fits 
 6 -- ft990813_1052_0445S005001H.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S002601H.fits 
 2 -- ft990813_1052_0445S002701H.fits 
 3 -- ft990813_1052_0445S003301H.fits 
 4 -- ft990813_1052_0445S003401H.fits 
 5 -- ft990813_1052_0445S004901H.fits 
 6 -- ft990813_1052_0445S005001H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010s000401l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  14  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 14 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S000301L.fits 
 2 -- ft990813_1052_0445S000501L.fits 
 3 -- ft990813_1052_0445S000801L.fits 
 4 -- ft990813_1052_0445S001101L.fits 
 5 -- ft990813_1052_0445S001301L.fits 
 6 -- ft990813_1052_0445S001501L.fits 
 7 -- ft990813_1052_0445S001801L.fits 
 8 -- ft990813_1052_0445S002001L.fits 
 9 -- ft990813_1052_0445S002901L.fits 
 10 -- ft990813_1052_0445S003101L.fits 
 11 -- ft990813_1052_0445S003901L.fits 
 12 -- ft990813_1052_0445S004101L.fits 
 13 -- ft990813_1052_0445S004301L.fits 
 14 -- ft990813_1052_0445S004501L.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S000301L.fits 
 2 -- ft990813_1052_0445S000501L.fits 
 3 -- ft990813_1052_0445S000801L.fits 
 4 -- ft990813_1052_0445S001101L.fits 
 5 -- ft990813_1052_0445S001301L.fits 
 6 -- ft990813_1052_0445S001501L.fits 
 7 -- ft990813_1052_0445S001801L.fits 
 8 -- ft990813_1052_0445S002001L.fits 
 9 -- ft990813_1052_0445S002901L.fits 
 10 -- ft990813_1052_0445S003101L.fits 
 11 -- ft990813_1052_0445S003901L.fits 
 12 -- ft990813_1052_0445S004101L.fits 
 13 -- ft990813_1052_0445S004301L.fits 
 14 -- ft990813_1052_0445S004501L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 285 events ft990813_1052_0445S000201L.fits ft990813_1052_0445S000701L.fits ft990813_1052_0445S001201L.fits ft990813_1052_0445S001901L.fits ft990813_1052_0445S003001L.fits
-> Ignoring the following files containing 72 events ft990813_1052_0445S003201L.fits
-> Ignoring the following files containing 18 events ft990813_1052_0445S002301M.fits
-> Grouping s1 event files
-> stdout output from group_event_files
1 ft990813_1052_0445S100401M.fits 80813
1 ft990813_1052_0445S100601M.fits 80813
1 ft990813_1052_0445S100901M.fits 80813
1 ft990813_1052_0445S101401M.fits 80813
1 ft990813_1052_0445S101601M.fits 80813
1 ft990813_1052_0445S102201M.fits 80813
1 ft990813_1052_0445S102401M.fits 80813
1 ft990813_1052_0445S103801M.fits 80813
1 ft990813_1052_0445S104001M.fits 80813
1 ft990813_1052_0445S104201M.fits 80813
1 ft990813_1052_0445S104401M.fits 80813
1 ft990813_1052_0445S104701M.fits 80813
1 ft990813_1052_0445S105201M.fits 80813
2 ft990813_1052_0445S101001H.fits 76997
2 ft990813_1052_0445S101701H.fits 76997
2 ft990813_1052_0445S102101H.fits 76997
2 ft990813_1052_0445S102501H.fits 76997
2 ft990813_1052_0445S102801H.fits 76997
2 ft990813_1052_0445S103501H.fits 76997
2 ft990813_1052_0445S103601H.fits 76997
2 ft990813_1052_0445S103701H.fits 76997
2 ft990813_1052_0445S104601H.fits 76997
2 ft990813_1052_0445S104801H.fits 76997
2 ft990813_1052_0445S105101H.fits 76997
3 ft990813_1052_0445S102601H.fits 48640
3 ft990813_1052_0445S102701H.fits 48640
3 ft990813_1052_0445S103301H.fits 48640
3 ft990813_1052_0445S103401H.fits 48640
3 ft990813_1052_0445S104901H.fits 48640
3 ft990813_1052_0445S105001H.fits 48640
4 ft990813_1052_0445S100301L.fits 22656
4 ft990813_1052_0445S100501L.fits 22656
4 ft990813_1052_0445S100801L.fits 22656
4 ft990813_1052_0445S101101L.fits 22656
4 ft990813_1052_0445S101301L.fits 22656
4 ft990813_1052_0445S101501L.fits 22656
4 ft990813_1052_0445S101801L.fits 22656
4 ft990813_1052_0445S102001L.fits 22656
4 ft990813_1052_0445S102901L.fits 22656
4 ft990813_1052_0445S103101L.fits 22656
4 ft990813_1052_0445S103901L.fits 22656
4 ft990813_1052_0445S104101L.fits 22656
4 ft990813_1052_0445S104301L.fits 22656
4 ft990813_1052_0445S104501L.fits 22656
5 ft990813_1052_0445S100201L.fits 296
5 ft990813_1052_0445S100701L.fits 296
5 ft990813_1052_0445S101201L.fits 296
5 ft990813_1052_0445S101901L.fits 296
5 ft990813_1052_0445S103001L.fits 296
6 ft990813_1052_0445S103201L.fits 64
7 ft990813_1052_0445S102301M.fits 28
-> Creating ad87044010s100101m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  13  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 13 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S100401M.fits 
 2 -- ft990813_1052_0445S100601M.fits 
 3 -- ft990813_1052_0445S100901M.fits 
 4 -- ft990813_1052_0445S101401M.fits 
 5 -- ft990813_1052_0445S101601M.fits 
 6 -- ft990813_1052_0445S102201M.fits 
 7 -- ft990813_1052_0445S102401M.fits 
 8 -- ft990813_1052_0445S103801M.fits 
 9 -- ft990813_1052_0445S104001M.fits 
 10 -- ft990813_1052_0445S104201M.fits 
 11 -- ft990813_1052_0445S104401M.fits 
 12 -- ft990813_1052_0445S104701M.fits 
 13 -- ft990813_1052_0445S105201M.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S100401M.fits 
 2 -- ft990813_1052_0445S100601M.fits 
 3 -- ft990813_1052_0445S100901M.fits 
 4 -- ft990813_1052_0445S101401M.fits 
 5 -- ft990813_1052_0445S101601M.fits 
 6 -- ft990813_1052_0445S102201M.fits 
 7 -- ft990813_1052_0445S102401M.fits 
 8 -- ft990813_1052_0445S103801M.fits 
 9 -- ft990813_1052_0445S104001M.fits 
 10 -- ft990813_1052_0445S104201M.fits 
 11 -- ft990813_1052_0445S104401M.fits 
 12 -- ft990813_1052_0445S104701M.fits 
 13 -- ft990813_1052_0445S105201M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010s100201h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  11  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 11 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S101001H.fits 
 2 -- ft990813_1052_0445S101701H.fits 
 3 -- ft990813_1052_0445S102101H.fits 
 4 -- ft990813_1052_0445S102501H.fits 
 5 -- ft990813_1052_0445S102801H.fits 
 6 -- ft990813_1052_0445S103501H.fits 
 7 -- ft990813_1052_0445S103601H.fits 
 8 -- ft990813_1052_0445S103701H.fits 
 9 -- ft990813_1052_0445S104601H.fits 
 10 -- ft990813_1052_0445S104801H.fits 
 11 -- ft990813_1052_0445S105101H.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S101001H.fits 
 2 -- ft990813_1052_0445S101701H.fits 
 3 -- ft990813_1052_0445S102101H.fits 
 4 -- ft990813_1052_0445S102501H.fits 
 5 -- ft990813_1052_0445S102801H.fits 
 6 -- ft990813_1052_0445S103501H.fits 
 7 -- ft990813_1052_0445S103601H.fits 
 8 -- ft990813_1052_0445S103701H.fits 
 9 -- ft990813_1052_0445S104601H.fits 
 10 -- ft990813_1052_0445S104801H.fits 
 11 -- ft990813_1052_0445S105101H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010s100301h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  6  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 6 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S102601H.fits 
 2 -- ft990813_1052_0445S102701H.fits 
 3 -- ft990813_1052_0445S103301H.fits 
 4 -- ft990813_1052_0445S103401H.fits 
 5 -- ft990813_1052_0445S104901H.fits 
 6 -- ft990813_1052_0445S105001H.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S102601H.fits 
 2 -- ft990813_1052_0445S102701H.fits 
 3 -- ft990813_1052_0445S103301H.fits 
 4 -- ft990813_1052_0445S103401H.fits 
 5 -- ft990813_1052_0445S104901H.fits 
 6 -- ft990813_1052_0445S105001H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010s100401l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  14  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 14 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445S100301L.fits 
 2 -- ft990813_1052_0445S100501L.fits 
 3 -- ft990813_1052_0445S100801L.fits 
 4 -- ft990813_1052_0445S101101L.fits 
 5 -- ft990813_1052_0445S101301L.fits 
 6 -- ft990813_1052_0445S101501L.fits 
 7 -- ft990813_1052_0445S101801L.fits 
 8 -- ft990813_1052_0445S102001L.fits 
 9 -- ft990813_1052_0445S102901L.fits 
 10 -- ft990813_1052_0445S103101L.fits 
 11 -- ft990813_1052_0445S103901L.fits 
 12 -- ft990813_1052_0445S104101L.fits 
 13 -- ft990813_1052_0445S104301L.fits 
 14 -- ft990813_1052_0445S104501L.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445S100301L.fits 
 2 -- ft990813_1052_0445S100501L.fits 
 3 -- ft990813_1052_0445S100801L.fits 
 4 -- ft990813_1052_0445S101101L.fits 
 5 -- ft990813_1052_0445S101301L.fits 
 6 -- ft990813_1052_0445S101501L.fits 
 7 -- ft990813_1052_0445S101801L.fits 
 8 -- ft990813_1052_0445S102001L.fits 
 9 -- ft990813_1052_0445S102901L.fits 
 10 -- ft990813_1052_0445S103101L.fits 
 11 -- ft990813_1052_0445S103901L.fits 
 12 -- ft990813_1052_0445S104101L.fits 
 13 -- ft990813_1052_0445S104301L.fits 
 14 -- ft990813_1052_0445S104501L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 296 events ft990813_1052_0445S100201L.fits ft990813_1052_0445S100701L.fits ft990813_1052_0445S101201L.fits ft990813_1052_0445S101901L.fits ft990813_1052_0445S103001L.fits
-> Ignoring the following files containing 64 events ft990813_1052_0445S103201L.fits
-> Ignoring the following files containing 28 events ft990813_1052_0445S102301M.fits
-> Grouping g2 event files
-> stdout output from group_event_files
1 ft990813_1052_0445G201970H.fits 17981
1 ft990813_1052_0445G202070H.fits 17981
1 ft990813_1052_0445G203170H.fits 17981
1 ft990813_1052_0445G203770H.fits 17981
1 ft990813_1052_0445G203870H.fits 17981
1 ft990813_1052_0445G204670H.fits 17981
1 ft990813_1052_0445G205570H.fits 17981
1 ft990813_1052_0445G205670H.fits 17981
1 ft990813_1052_0445G206470H.fits 17981
1 ft990813_1052_0445G208770H.fits 17981
1 ft990813_1052_0445G208970H.fits 17981
2 ft990813_1052_0445G200670M.fits 16654
2 ft990813_1052_0445G200970M.fits 16654
2 ft990813_1052_0445G201870M.fits 16654
2 ft990813_1052_0445G203070M.fits 16654
2 ft990813_1052_0445G206570M.fits 16654
2 ft990813_1052_0445G206970M.fits 16654
2 ft990813_1052_0445G207870M.fits 16654
2 ft990813_1052_0445G208470M.fits 16654
2 ft990813_1052_0445G208870M.fits 16654
2 ft990813_1052_0445G209070M.fits 16654
3 ft990813_1052_0445G200870L.fits 4359
3 ft990813_1052_0445G202670L.fits 4359
3 ft990813_1052_0445G203670L.fits 4359
3 ft990813_1052_0445G206870L.fits 4359
3 ft990813_1052_0445G207470L.fits 4359
3 ft990813_1052_0445G208070L.fits 4359
3 ft990813_1052_0445G208670L.fits 4359
4 ft990813_1052_0445G200770L.fits 410
4 ft990813_1052_0445G207970L.fits 410
4 ft990813_1052_0445G208570L.fits 410
5 ft990813_1052_0445G202570L.fits 79
5 ft990813_1052_0445G203570L.fits 79
5 ft990813_1052_0445G207370L.fits 79
6 ft990813_1052_0445G200570M.fits 32
6 ft990813_1052_0445G201770M.fits 32
7 ft990813_1052_0445G202970M.fits 23
7 ft990813_1052_0445G207770M.fits 23
7 ft990813_1052_0445G208370M.fits 23
8 ft990813_1052_0445G202770M.fits 12
9 ft990813_1052_0445G208170M.fits 12
10 ft990813_1052_0445G207670M.fits 10
11 ft990813_1052_0445G208270M.fits 10
12 ft990813_1052_0445G207570M.fits 9
13 ft990813_1052_0445G202870M.fits 7
14 ft990813_1052_0445G200470M.fits 5
14 ft990813_1052_0445G201670M.fits 5
15 ft990813_1052_0445G205370H.fits 3
16 ft990813_1052_0445G204770H.fits 2
17 ft990813_1052_0445G206270H.fits 2
18 ft990813_1052_0445G204370H.fits 1
19 ft990813_1052_0445G204470H.fits 1
20 ft990813_1052_0445G204570H.fits 1
21 ft990813_1052_0445G205270H.fits 1
22 ft990813_1052_0445G205470H.fits 1
23 ft990813_1052_0445G206370H.fits 1
-> Creating ad87044010g200170h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  11  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 11 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445G201970H.fits 
 2 -- ft990813_1052_0445G202070H.fits 
 3 -- ft990813_1052_0445G203170H.fits 
 4 -- ft990813_1052_0445G203770H.fits 
 5 -- ft990813_1052_0445G203870H.fits 
 6 -- ft990813_1052_0445G204670H.fits 
 7 -- ft990813_1052_0445G205570H.fits 
 8 -- ft990813_1052_0445G205670H.fits 
 9 -- ft990813_1052_0445G206470H.fits 
 10 -- ft990813_1052_0445G208770H.fits 
 11 -- ft990813_1052_0445G208970H.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445G201970H.fits 
 2 -- ft990813_1052_0445G202070H.fits 
 3 -- ft990813_1052_0445G203170H.fits 
 4 -- ft990813_1052_0445G203770H.fits 
 5 -- ft990813_1052_0445G203870H.fits 
 6 -- ft990813_1052_0445G204670H.fits 
 7 -- ft990813_1052_0445G205570H.fits 
 8 -- ft990813_1052_0445G205670H.fits 
 9 -- ft990813_1052_0445G206470H.fits 
 10 -- ft990813_1052_0445G208770H.fits 
 11 -- ft990813_1052_0445G208970H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010g200270m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  10  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 10 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445G200670M.fits 
 2 -- ft990813_1052_0445G200970M.fits 
 3 -- ft990813_1052_0445G201870M.fits 
 4 -- ft990813_1052_0445G203070M.fits 
 5 -- ft990813_1052_0445G206570M.fits 
 6 -- ft990813_1052_0445G206970M.fits 
 7 -- ft990813_1052_0445G207870M.fits 
 8 -- ft990813_1052_0445G208470M.fits 
 9 -- ft990813_1052_0445G208870M.fits 
 10 -- ft990813_1052_0445G209070M.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445G200670M.fits 
 2 -- ft990813_1052_0445G200970M.fits 
 3 -- ft990813_1052_0445G201870M.fits 
 4 -- ft990813_1052_0445G203070M.fits 
 5 -- ft990813_1052_0445G206570M.fits 
 6 -- ft990813_1052_0445G206970M.fits 
 7 -- ft990813_1052_0445G207870M.fits 
 8 -- ft990813_1052_0445G208470M.fits 
 9 -- ft990813_1052_0445G208870M.fits 
 10 -- ft990813_1052_0445G209070M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010g200370l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445G200870L.fits 
 2 -- ft990813_1052_0445G202670L.fits 
 3 -- ft990813_1052_0445G203670L.fits 
 4 -- ft990813_1052_0445G206870L.fits 
 5 -- ft990813_1052_0445G207470L.fits 
 6 -- ft990813_1052_0445G208070L.fits 
 7 -- ft990813_1052_0445G208670L.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445G200870L.fits 
 2 -- ft990813_1052_0445G202670L.fits 
 3 -- ft990813_1052_0445G203670L.fits 
 4 -- ft990813_1052_0445G206870L.fits 
 5 -- ft990813_1052_0445G207470L.fits 
 6 -- ft990813_1052_0445G208070L.fits 
 7 -- ft990813_1052_0445G208670L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 410 events ft990813_1052_0445G200770L.fits ft990813_1052_0445G207970L.fits ft990813_1052_0445G208570L.fits
-> Ignoring the following files containing 79 events ft990813_1052_0445G202570L.fits ft990813_1052_0445G203570L.fits ft990813_1052_0445G207370L.fits
-> Ignoring the following files containing 32 events ft990813_1052_0445G200570M.fits ft990813_1052_0445G201770M.fits
-> Ignoring the following files containing 23 events ft990813_1052_0445G202970M.fits ft990813_1052_0445G207770M.fits ft990813_1052_0445G208370M.fits
-> Ignoring the following files containing 12 events ft990813_1052_0445G202770M.fits
-> Ignoring the following files containing 12 events ft990813_1052_0445G208170M.fits
-> Ignoring the following files containing 10 events ft990813_1052_0445G207670M.fits
-> Ignoring the following files containing 10 events ft990813_1052_0445G208270M.fits
-> Ignoring the following files containing 9 events ft990813_1052_0445G207570M.fits
-> Ignoring the following files containing 7 events ft990813_1052_0445G202870M.fits
-> Ignoring the following files containing 5 events ft990813_1052_0445G200470M.fits ft990813_1052_0445G201670M.fits
-> Ignoring the following files containing 3 events ft990813_1052_0445G205370H.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G204770H.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G206270H.fits
-> Ignoring the following files containing 1 events ft990813_1052_0445G204370H.fits
-> Ignoring the following files containing 1 events ft990813_1052_0445G204470H.fits
-> Ignoring the following files containing 1 events ft990813_1052_0445G204570H.fits
-> Ignoring the following files containing 1 events ft990813_1052_0445G205270H.fits
-> Ignoring the following files containing 1 events ft990813_1052_0445G205470H.fits
-> Ignoring the following files containing 1 events ft990813_1052_0445G206370H.fits
-> Grouping g3 event files
-> stdout output from group_event_files
1 ft990813_1052_0445G301970H.fits 16959
1 ft990813_1052_0445G302070H.fits 16959
1 ft990813_1052_0445G303170H.fits 16959
1 ft990813_1052_0445G303770H.fits 16959
1 ft990813_1052_0445G303870H.fits 16959
1 ft990813_1052_0445G304670H.fits 16959
1 ft990813_1052_0445G305670H.fits 16959
1 ft990813_1052_0445G305770H.fits 16959
1 ft990813_1052_0445G306570H.fits 16959
1 ft990813_1052_0445G308870H.fits 16959
1 ft990813_1052_0445G309070H.fits 16959
2 ft990813_1052_0445G300670M.fits 15941
2 ft990813_1052_0445G300970M.fits 15941
2 ft990813_1052_0445G301870M.fits 15941
2 ft990813_1052_0445G303070M.fits 15941
2 ft990813_1052_0445G306670M.fits 15941
2 ft990813_1052_0445G307070M.fits 15941
2 ft990813_1052_0445G307970M.fits 15941
2 ft990813_1052_0445G308570M.fits 15941
2 ft990813_1052_0445G308970M.fits 15941
2 ft990813_1052_0445G309170M.fits 15941
3 ft990813_1052_0445G300870L.fits 4078
3 ft990813_1052_0445G302670L.fits 4078
3 ft990813_1052_0445G303670L.fits 4078
3 ft990813_1052_0445G306970L.fits 4078
3 ft990813_1052_0445G307570L.fits 4078
3 ft990813_1052_0445G308170L.fits 4078
3 ft990813_1052_0445G308770L.fits 4078
4 ft990813_1052_0445G300770L.fits 370
4 ft990813_1052_0445G308070L.fits 370
4 ft990813_1052_0445G308670L.fits 370
5 ft990813_1052_0445G302570L.fits 58
5 ft990813_1052_0445G303570L.fits 58
5 ft990813_1052_0445G307470L.fits 58
6 ft990813_1052_0445G300570M.fits 41
6 ft990813_1052_0445G301770M.fits 41
7 ft990813_1052_0445G302970M.fits 18
7 ft990813_1052_0445G307870M.fits 18
7 ft990813_1052_0445G308470M.fits 18
8 ft990813_1052_0445G302870M.fits 12
9 ft990813_1052_0445G308270M.fits 8
10 ft990813_1052_0445G304870H.fits 7
11 ft990813_1052_0445G307770M.fits 7
12 ft990813_1052_0445G307670M.fits 6
13 ft990813_1052_0445G308370M.fits 6
14 ft990813_1052_0445G302770M.fits 5
15 ft990813_1052_0445G300470M.fits 2
15 ft990813_1052_0445G301670M.fits 2
16 ft990813_1052_0445G304570H.fits 2
17 ft990813_1052_0445G304770H.fits 2
18 ft990813_1052_0445G304970H.fits 2
19 ft990813_1052_0445G305470H.fits 2
20 ft990813_1052_0445G305570H.fits 2
21 ft990813_1052_0445G304470H.fits 1
-> Creating ad87044010g300170h.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  11  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 11 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445G301970H.fits 
 2 -- ft990813_1052_0445G302070H.fits 
 3 -- ft990813_1052_0445G303170H.fits 
 4 -- ft990813_1052_0445G303770H.fits 
 5 -- ft990813_1052_0445G303870H.fits 
 6 -- ft990813_1052_0445G304670H.fits 
 7 -- ft990813_1052_0445G305670H.fits 
 8 -- ft990813_1052_0445G305770H.fits 
 9 -- ft990813_1052_0445G306570H.fits 
 10 -- ft990813_1052_0445G308870H.fits 
 11 -- ft990813_1052_0445G309070H.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445G301970H.fits 
 2 -- ft990813_1052_0445G302070H.fits 
 3 -- ft990813_1052_0445G303170H.fits 
 4 -- ft990813_1052_0445G303770H.fits 
 5 -- ft990813_1052_0445G303870H.fits 
 6 -- ft990813_1052_0445G304670H.fits 
 7 -- ft990813_1052_0445G305670H.fits 
 8 -- ft990813_1052_0445G305770H.fits 
 9 -- ft990813_1052_0445G306570H.fits 
 10 -- ft990813_1052_0445G308870H.fits 
 11 -- ft990813_1052_0445G309070H.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010g300270m.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  10  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 10 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445G300670M.fits 
 2 -- ft990813_1052_0445G300970M.fits 
 3 -- ft990813_1052_0445G301870M.fits 
 4 -- ft990813_1052_0445G303070M.fits 
 5 -- ft990813_1052_0445G306670M.fits 
 6 -- ft990813_1052_0445G307070M.fits 
 7 -- ft990813_1052_0445G307970M.fits 
 8 -- ft990813_1052_0445G308570M.fits 
 9 -- ft990813_1052_0445G308970M.fits 
 10 -- ft990813_1052_0445G309170M.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445G300670M.fits 
 2 -- ft990813_1052_0445G300970M.fits 
 3 -- ft990813_1052_0445G301870M.fits 
 4 -- ft990813_1052_0445G303070M.fits 
 5 -- ft990813_1052_0445G306670M.fits 
 6 -- ft990813_1052_0445G307070M.fits 
 7 -- ft990813_1052_0445G307970M.fits 
 8 -- ft990813_1052_0445G308570M.fits 
 9 -- ft990813_1052_0445G308970M.fits 
 10 -- ft990813_1052_0445G309170M.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Creating ad87044010g300370l.unf
-> stdout output from cmerge
---- cmerge:  version 1.7 ----

A total of  7  fits files ...... 
Sorting files using KEY: TSTART ... 
Checking input fits files (zero TIME, GTI) ...
Checking GTI overlap in input files ... 
Merging 7 good fits files ...
Merging binary extension #: 1 
 1 -- ft990813_1052_0445G300870L.fits 
 2 -- ft990813_1052_0445G302670L.fits 
 3 -- ft990813_1052_0445G303670L.fits 
 4 -- ft990813_1052_0445G306970L.fits 
 5 -- ft990813_1052_0445G307570L.fits 
 6 -- ft990813_1052_0445G308170L.fits 
 7 -- ft990813_1052_0445G308770L.fits 
Merging binary extension #: 2 
 1 -- ft990813_1052_0445G300870L.fits 
 2 -- ft990813_1052_0445G302670L.fits 
 3 -- ft990813_1052_0445G303670L.fits 
 4 -- ft990813_1052_0445G306970L.fits 
 5 -- ft990813_1052_0445G307570L.fits 
 6 -- ft990813_1052_0445G308170L.fits 
 7 -- ft990813_1052_0445G308770L.fits 
Checking the output file ...
 Extention # 1 ...... OK
 Extention # 2 ...... OK
The program appears to have finished successfully!
-> Ignoring the following files containing 370 events ft990813_1052_0445G300770L.fits ft990813_1052_0445G308070L.fits ft990813_1052_0445G308670L.fits
-> Ignoring the following files containing 58 events ft990813_1052_0445G302570L.fits ft990813_1052_0445G303570L.fits ft990813_1052_0445G307470L.fits
-> Ignoring the following files containing 41 events ft990813_1052_0445G300570M.fits ft990813_1052_0445G301770M.fits
-> Ignoring the following files containing 18 events ft990813_1052_0445G302970M.fits ft990813_1052_0445G307870M.fits ft990813_1052_0445G308470M.fits
-> Ignoring the following files containing 12 events ft990813_1052_0445G302870M.fits
-> Ignoring the following files containing 8 events ft990813_1052_0445G308270M.fits
-> Ignoring the following files containing 7 events ft990813_1052_0445G304870H.fits
-> Ignoring the following files containing 7 events ft990813_1052_0445G307770M.fits
-> Ignoring the following files containing 6 events ft990813_1052_0445G307670M.fits
-> Ignoring the following files containing 6 events ft990813_1052_0445G308370M.fits
-> Ignoring the following files containing 5 events ft990813_1052_0445G302770M.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G300470M.fits ft990813_1052_0445G301670M.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G304570H.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G304770H.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G304970H.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G305470H.fits
-> Ignoring the following files containing 2 events ft990813_1052_0445G305570H.fits
-> Ignoring the following files containing 1 events ft990813_1052_0445G304470H.fits
-> stdout output from tar
a ft990813_1052_0445G200470M.fits 31K
a ft990813_1052_0445G200570M.fits 31K
a ft990813_1052_0445G200770L.fits 31K
a ft990813_1052_0445G201670M.fits 31K
a ft990813_1052_0445G201770M.fits 31K
a ft990813_1052_0445G202570L.fits 31K
a ft990813_1052_0445G202770M.fits 31K
a ft990813_1052_0445G202870M.fits 31K
a ft990813_1052_0445G202970M.fits 31K
a ft990813_1052_0445G203570L.fits 31K
a ft990813_1052_0445G204370H.fits 31K
a ft990813_1052_0445G204470H.fits 31K
a ft990813_1052_0445G204570H.fits 31K
a ft990813_1052_0445G204770H.fits 31K
a ft990813_1052_0445G205270H.fits 31K
a ft990813_1052_0445G205370H.fits 31K
a ft990813_1052_0445G205470H.fits 31K
a ft990813_1052_0445G206270H.fits 31K
a ft990813_1052_0445G206370H.fits 31K
a ft990813_1052_0445G207370L.fits 31K
a ft990813_1052_0445G207570M.fits 31K
a ft990813_1052_0445G207670M.fits 31K
a ft990813_1052_0445G207770M.fits 31K
a ft990813_1052_0445G207970L.fits 34K
a ft990813_1052_0445G208170M.fits 31K
a ft990813_1052_0445G208270M.fits 31K
a ft990813_1052_0445G208370M.fits 31K
a ft990813_1052_0445G208570L.fits 34K
a ft990813_1052_0445G300470M.fits 31K
a ft990813_1052_0445G300570M.fits 31K
a ft990813_1052_0445G300770L.fits 31K
a ft990813_1052_0445G301670M.fits 31K
a ft990813_1052_0445G301770M.fits 31K
a ft990813_1052_0445G302570L.fits 31K
a ft990813_1052_0445G302770M.fits 31K
a ft990813_1052_0445G302870M.fits 31K
a ft990813_1052_0445G302970M.fits 31K
a ft990813_1052_0445G303570L.fits 31K
a ft990813_1052_0445G304470H.fits 31K
a ft990813_1052_0445G304570H.fits 31K
a ft990813_1052_0445G304770H.fits 31K
a ft990813_1052_0445G304870H.fits 31K
a ft990813_1052_0445G304970H.fits 31K
a ft990813_1052_0445G305470H.fits 31K
a ft990813_1052_0445G305570H.fits 31K
a ft990813_1052_0445G307470L.fits 31K
a ft990813_1052_0445G307670M.fits 31K
a ft990813_1052_0445G307770M.fits 31K
a ft990813_1052_0445G307870M.fits 31K
a ft990813_1052_0445G308070L.fits 34K
a ft990813_1052_0445G308270M.fits 31K
a ft990813_1052_0445G308370M.fits 31K
a ft990813_1052_0445G308470M.fits 31K
a ft990813_1052_0445G308670L.fits 37K
a ft990813_1052_0445S000201L.fits 29K
a ft990813_1052_0445S000701L.fits 31K
a ft990813_1052_0445S001201L.fits 31K
a ft990813_1052_0445S001901L.fits 29K
a ft990813_1052_0445S002301M.fits 29K
a ft990813_1052_0445S003001L.fits 29K
a ft990813_1052_0445S003201L.fits 29K
a ft990813_1052_0445S100201L.fits 29K
a ft990813_1052_0445S100701L.fits 31K
a ft990813_1052_0445S101201L.fits 31K
a ft990813_1052_0445S101901L.fits 29K
a ft990813_1052_0445S102301M.fits 29K
a ft990813_1052_0445S103001L.fits 29K
a ft990813_1052_0445S103201L.fits 29K

Converting FAINT mode files to BRIGHT and BRIGHT2 modes (18:7:42)

-> Split threshold for SIS0=40, and SIS1=40
-> Fetching faintdfe.tbl
-> Calculating DFE values for ad87044010s000101m.unf with zerodef=1
-> Converting ad87044010s000101m.unf to ad87044010s000112m.unf
-> Calculating DFE values for ad87044010s000101m.unf with zerodef=2
-> Converting ad87044010s000101m.unf to ad87044010s000102m.unf
-> Calculating DFE values for ad87044010s000201h.unf with zerodef=1
-> Converting ad87044010s000201h.unf to ad87044010s000212h.unf
-> Calculating DFE values for ad87044010s000201h.unf with zerodef=2
-> Converting ad87044010s000201h.unf to ad87044010s000202h.unf
-> Calculating DFE values for ad87044010s000301h.unf with zerodef=1
-> Converting ad87044010s000301h.unf to ad87044010s000312h.unf
-> Calculating DFE values for ad87044010s000301h.unf with zerodef=2
-> Converting ad87044010s000301h.unf to ad87044010s000302h.unf
-> Calculating DFE values for ad87044010s000401l.unf with zerodef=1
-> Converting ad87044010s000401l.unf to ad87044010s000412l.unf
-> Calculating DFE values for ad87044010s000401l.unf with zerodef=2
-> Converting ad87044010s000401l.unf to ad87044010s000402l.unf
-> Calculating DFE values for ad87044010s100101m.unf with zerodef=1
-> Converting ad87044010s100101m.unf to ad87044010s100112m.unf
-> Calculating DFE values for ad87044010s100101m.unf with zerodef=2
-> Converting ad87044010s100101m.unf to ad87044010s100102m.unf
-> Calculating DFE values for ad87044010s100201h.unf with zerodef=1
-> Converting ad87044010s100201h.unf to ad87044010s100212h.unf
-> Calculating DFE values for ad87044010s100201h.unf with zerodef=2
-> Converting ad87044010s100201h.unf to ad87044010s100202h.unf
-> Calculating DFE values for ad87044010s100301h.unf with zerodef=1
-> Converting ad87044010s100301h.unf to ad87044010s100312h.unf
-> Calculating DFE values for ad87044010s100301h.unf with zerodef=2
-> Converting ad87044010s100301h.unf to ad87044010s100302h.unf
-> Calculating DFE values for ad87044010s100401l.unf with zerodef=1
-> Converting ad87044010s100401l.unf to ad87044010s100412l.unf
-> Calculating DFE values for ad87044010s100401l.unf with zerodef=2
-> Converting ad87044010s100401l.unf to ad87044010s100402l.unf

Calibrating the unfiltered event files (18:13:30)

-> Creating GIS gain history files
-> leapsec.fits is already present in the working directory
-> Fetching gis_temp2gain.fits from /aps/calibration
-> Creating Gain History File ft990813_1052_0445.ghf
-> stdout output from temp2gain
temp2gain V4.6
leapsec FITS data was successfully read

'ft990813_1052.0445' is successfully opened
Data Start Time is 208695137.05 (19990813 105213)
Time Margin 2.0 sec included
'ft990813_1052.0445' EOF detected, sf=13058
Data End Time is 208759556.86 (19990814 044552)
Gain History is written in ft990813_1052_0445.ghf
-> Generating attitude correction table ad87044010_003_bp4.txt
-> Extracting info from ft990813_1052_0445CMHK.fits
-> Using BP4 between 98.7249436446032 and 117.975056355397
-> Running ascalin on all unfiltered event files
-> Preparing to run ascalin on ad87044010g200170h.unf
-> Fetching gis2_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad87044010g200170h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87044010g200270m.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87044010g200270m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87044010g200370l.unf
-> gis2_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87044010g200370l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87044010g300170h.unf
-> Fetching gis3_ano_on_flf_180295.fits from /aps/calibration
-> Running ascalin on ad87044010g300170h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87044010g300270m.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87044010g300270m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87044010g300370l.unf
-> gis3_ano_on_flf_180295.fits is already present in the working directory
-> Running ascalin on ad87044010g300370l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
-> Preparing to run ascalin on ad87044010s000101m.unf
-> Fetching s0_teldef_ascalin.fits from /aps/calibration
-> Fetching sisph2pi_110397.fits from /aps/calibration
-> Running ascalin on ad87044010s000101m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000102m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000102m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000112m.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000112m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000201h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000201h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000202h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000202h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000212h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000212h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000301h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000301h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000302h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000302h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000312h.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000312h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000401l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000401l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000402l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000402l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s000412l.unf
-> s0_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s000412l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100101m.unf
-> Fetching s1_teldef_ascalin.fits from /aps/calibration
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100101m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100102m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100102m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100112m.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100112m.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100201h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100201h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100202h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100202h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100212h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100212h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100301h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100301h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100302h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100302h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100312h.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100312h.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100401l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100401l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100402l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100402l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend
-> Preparing to run ascalin on ad87044010s100412l.unf
-> s1_teldef_ascalin.fits is already present in the working directory
-> sisph2pi_110397.fits is already present in the working directory
-> Running ascalin on ad87044010s100412l.unf
-> stdout output from ascalin
ASCALIN_V0.9v
WARNING: Event end time not covered by gain history file
WARNING: extrapolating gain/CTI trend

Creating filter files (18:22:45)

-> leapsec.fits is already present in the working directory
-> Fetching rigidity.data.1.23 from /aps/calibration
-> Copying orbit file /aps/orbit/frf.orbit.252 to working directory
-> Creating ft990813_1052_0445.mkf
-> stdout output from mkfilter2
 
leapsec FITS data was successfully read

S0-HK file: ft990813_1052_0445S0HK.fits

S1-HK file: ft990813_1052_0445S1HK.fits

G2-HK file: ft990813_1052_0445G2HK.fits

G3-HK file: ft990813_1052_0445G3HK.fits

Date and time are: 1999-08-13 10:51:15  mjd=51403.452258

Orbit file name is frf.orbit.252

Epoch of Orbital Elements: 1999-08-09 21:00:00

Rigidity Data File: rigidity.data.1.23

Attitude FRF: fa990813_1052.0445

output FITS File: ft990813_1052_0445.mkf

mkfilter2: Warning, faQparam error: time= 2.086950910519e+08 outside range of attitude file

           Euler angles undefined for this bin

Total 2015 Data bins were processed.
-> Adding deadtime to ft990813_1052_0445.mkf
-> Adding ad87044010_s0.dfe to ft990813_1052_0445.mkf
-> Adding ad87044010_s1.dfe to ft990813_1052_0445.mkf
-> Plotting quantities from ft990813_1052_0445.mkf
-> Extracting telemetry corruption files

Cleaning and filtering the unfiltered event files (18:39:9)

-> Skipping ad87044010s000101m.unf because of mode
-> Filtering ad87044010s000102m.unf into ad87044010s000102m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   6490.8632
 The mean of the selected column is                  20.033528
 The standard deviation of the selected column is    8.1122407
 The minimum of selected column is                   3.5937607
 The maximum of selected column is                   57.062672
 The number of points used in calculation is              324
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.3 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.21E+05    27110 0100
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          25463     10843              0     14620         0         0
 Writing events file
  10843 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         25463     10843              0     14620         0         0
   in  10545.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        10843
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               7        8725
 Flickering pixels iter, pixels & cnts :   1           6          43
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           13
 Number of (internal) image counts   :        10843
 Number of image cts rejected (N, %) :         876880.86
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           13            0            0
 
 Image counts      :             0        10843            0            0
 Image cts rejected:             0         8768            0            0
 Image cts rej (%) :          0.00        80.86         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        10843            0            0
 Total cts rejected:             0         8768            0            0
 Total cts rej (%) :          0.00        80.86         0.00         0.00
 
 Number of clean counts accepted  :         2075
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           13
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad87044010s000102m.evt use_events=no
Wrote cleaned events file to ad87044010s000102m.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad87044010s000112m.unf into ad87044010s000112m.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   6490.8632
 The mean of the selected column is                  20.033528
 The standard deviation of the selected column is    8.1122407
 The minimum of selected column is                   3.5937607
 The maximum of selected column is                   57.062672
 The number of points used in calculation is              324
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<44.3 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.21E+05    27472 0100
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000112m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          25605     10902              0     14703         0         0
 Writing events file
  10902 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         25605     10902              0     14703         0         0
   in  10545.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        10902
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               7        8725
 Flickering pixels iter, pixels & cnts :   1           6          43
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           13
 Number of (internal) image counts   :        10902
 Number of image cts rejected (N, %) :         876880.43
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           13            0            0
 
 Image counts      :             0        10902            0            0
 Image cts rejected:             0         8768            0            0
 Image cts rej (%) :          0.00        80.43         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        10902            0            0
 Total cts rejected:             0         8768            0            0
 Total cts rej (%) :          0.00        80.43         0.00         0.00
 
 Number of clean counts accepted  :         2134
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           13
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad87044010s000112m.evt use_events=no
Wrote cleaned events file to ad87044010s000112m.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Skipping ad87044010s000201h.unf because of mode
-> Filtering ad87044010s000202h.unf into ad87044010s000202h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   8886.9226
 The mean of the selected column is                  19.361487
 The standard deviation of the selected column is    12.566069
 The minimum of selected column is                   3.4375103
 The maximum of selected column is                   193.37560
 The number of points used in calculation is              459
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<57 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.20E+05    21967 0100
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          20812     15229              0      5583         0         0
 Writing events file
  15229 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         20812     15229              0      5583         0         0
   in  14895.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        15229
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               7       12338
 Flickering pixels iter, pixels & cnts :   1           7          48
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           14
 Number of (internal) image counts   :        15229
 Number of image cts rejected (N, %) :        1238681.33
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           14            0            0
 
 Image counts      :             0        15229            0            0
 Image cts rejected:             0        12386            0            0
 Image cts rej (%) :          0.00        81.33         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        15229            0            0
 Total cts rejected:             0        12386            0            0
 Total cts rej (%) :          0.00        81.33         0.00         0.00
 
 Number of clean counts accepted  :         2843
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           14
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad87044010s000202h.evt use_events=no
Wrote cleaned events file to ad87044010s000202h.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Filtering ad87044010s000212h.unf into ad87044010s000212h.evt
-> Calculating statistics for S0_PIXL1
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   8886.9226
 The mean of the selected column is                  19.361487
 The standard deviation of the selected column is    12.566069
 The minimum of selected column is                   3.4375103
 The maximum of selected column is                   193.37560
 The number of points used in calculation is              459
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0 && S0_PIXL1<57 )  )
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.20E+05    22286 0100
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000212h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          20938     15303              0      5635         0         0
 Writing events file
  15303 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         20938     15303              0      5635         0         0
   in  14895.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        15303
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               7       12338
 Flickering pixels iter, pixels & cnts :   1           7          48
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           14
 Number of (internal) image counts   :        15303
 Number of image cts rejected (N, %) :        1238680.94
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           14            0            0
 
 Image counts      :             0        15303            0            0
 Image cts rejected:             0        12386            0            0
 Image cts rej (%) :          0.00        80.94         0.00         0.00
 
    filtering data...
 
 Total counts      :             0        15303            0            0
 Total cts rejected:             0        12386            0            0
 Total cts rej (%) :          0.00        80.94         0.00         0.00
 
 Number of clean counts accepted  :         2917
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           14
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad87044010s000212h.evt use_events=no
Wrote cleaned events file to ad87044010s000212h.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Skipping ad87044010s000301h.unf because of mode
-> Filtering ad87044010s000302h.unf into ad87044010s000302h.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&(S0_PIXL1>0)&&(S0_PIXL2>0)&&(S0_PIXL3>0)  )&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  17:42:08    0.76E+03    33789 1111
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000302h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS0-BRIGHT > Session saved, goodbye
-> Filtering ad87044010s000312h.unf into ad87044010s000312h.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL0>0)&&(S0_PIXL1>0)&&(S0_PIXL2>0)&&(S0_PIXL3>0)  )&&(  (S0_SATF0<1)
   ||(S0_SATF0>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF2<1)
   ||(S0_SATF2>1))
&&(  (S0_SATF3<1)
   ||(S0_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  17:42:08    0.76E+03    35093 1111
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000312h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000312h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS0-BRIGHT2 > Session saved, goodbye
-> Skipping ad87044010s000401l.unf because of mode
-> Filtering ad87044010s000402l.unf into ad87044010s000402l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      LOW         1999-08-13  10:59:38    0.12E+05     9398 0100
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000402l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT > extract events
!screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT > save clean outfile=ad87044010s000402l.evt use_events=no
Wrote cleaned events file to ad87044010s000402l.evt
 
!screen:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting ad87044010s000402l.evt since it contains 0 events
-> Filtering ad87044010s000412l.unf into ad87044010s000412l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S0_PIXL1>0)  )&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&(  (S0_SATF1<1)
   ||(S0_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     LOW         1999-08-13  10:59:38    0.12E+05     9508 0100
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000412l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s000412l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS0-BRIGHT2 > extract events
!screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad87044010s000412l.evt use_events=no
Wrote cleaned events file to ad87044010s000412l.evt
 
!screen:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Deleting ad87044010s000412l.evt since it contains 0 events
-> Skipping ad87044010s100101m.unf because of mode
-> Filtering ad87044010s100102m.unf into ad87044010s100102m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   7942.3675
 The mean of the selected column is                  27.673754
 The standard deviation of the selected column is    10.775366
 The minimum of selected column is                   7.0000210
 The maximum of selected column is                   71.093964
 The number of points used in calculation is              287
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<59.9 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.21E+05    41854 0001
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          31308     13013              0     18295         0         0
 Writing events file
  13013 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         31308     13013              0     18295         0         0
   in  9488.5     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        13013
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               9       11398
 Flickering pixels iter, pixels & cnts :   1           4          41
 
 Number of pixels rejected           :           13
 Number of (internal) image counts   :        13013
 Number of image cts rejected (N, %) :        1143987.90
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           13
 
 Image counts      :             0            0            0        13013
 Image cts rejected:             0            0            0        11439
 Image cts rej (%) :          0.00         0.00         0.00        87.90
 
    filtering data...
 
 Total counts      :             0            0            0        13013
 Total cts rejected:             0            0            0        11439
 Total cts rej (%) :          0.00         0.00         0.00        87.90
 
 Number of clean counts accepted  :         1574
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           13
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad87044010s100102m.evt use_events=no
Wrote cleaned events file to ad87044010s100102m.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad87044010s100112m.unf into ad87044010s100112m.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   7942.3675
 The mean of the selected column is                  27.673754
 The standard deviation of the selected column is    10.775366
 The minimum of selected column is                   7.0000210
 The maximum of selected column is                   71.093964
 The number of points used in calculation is              287
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<59.9 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.21E+05    42138 0001
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100112m.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          31455     13060              0     18395         0         0
 Writing events file
  13060 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         31455     13060              0     18395         0         0
   in  9488.5     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        13060
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :               9       11410
 Flickering pixels iter, pixels & cnts :   1           4          41
 
 Number of pixels rejected           :           13
 Number of (internal) image counts   :        13060
 Number of image cts rejected (N, %) :        1145187.68
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           13
 
 Image counts      :             0            0            0        13060
 Image cts rejected:             0            0            0        11451
 Image cts rej (%) :          0.00         0.00         0.00        87.68
 
    filtering data...
 
 Total counts      :             0            0            0        13060
 Total cts rejected:             0            0            0        11451
 Total cts rej (%) :          0.00         0.00         0.00        87.68
 
 Number of clean counts accepted  :         1609
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           13
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad87044010s100112m.evt use_events=no
Wrote cleaned events file to ad87044010s100112m.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Skipping ad87044010s100201h.unf because of mode
-> Filtering ad87044010s100202h.unf into ad87044010s100202h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   13998.965
 The mean of the selected column is                  30.632308
 The standard deviation of the selected column is    18.937480
 The minimum of selected column is                   6.4687691
 The maximum of selected column is                   226.78195
 The number of points used in calculation is              457
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<87.4 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.20E+05    38369 0001
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          28023     20692              0      7331         0         0
 Writing events file
  20692 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         28023     20692              0      7331         0         0
   in  14868.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        20692
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10       18254
 Flickering pixels iter, pixels & cnts :   1           9          69
 
 Number of pixels rejected           :           19
 Number of (internal) image counts   :        20692
 Number of image cts rejected (N, %) :        1832388.55
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           19
 
 Image counts      :             0            0            0        20692
 Image cts rejected:             0            0            0        18323
 Image cts rej (%) :          0.00         0.00         0.00        88.55
 
    filtering data...
 
 Total counts      :             0            0            0        20692
 Total cts rejected:             0            0            0        18323
 Total cts rej (%) :          0.00         0.00         0.00        88.55
 
 Number of clean counts accepted  :         2369
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           19
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad87044010s100202h.evt use_events=no
Wrote cleaned events file to ad87044010s100202h.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Filtering ad87044010s100212h.unf into ad87044010s100212h.evt
-> Calculating statistics for S1_PIXL3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   13998.965
 The mean of the selected column is                  30.632308
 The standard deviation of the selected column is    18.937480
 The minimum of selected column is                   6.4687691
 The maximum of selected column is                   226.78195
 The number of points used in calculation is              457
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0 && S1_PIXL3<87.4 )  )
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.20E+05    38590 0001
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100212h.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
          Total      Good    Bad: Region      Time     Phase       Cut
          28141     20762              0      7379         0         0
 Writing events file
  20762 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         28141     20762              0      7379         0         0
   in  14868.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        20762
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10       18280
 Flickering pixels iter, pixels & cnts :   1           9          69
 
 Number of pixels rejected           :           19
 Number of (internal) image counts   :        20762
 Number of image cts rejected (N, %) :        1834988.38
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           19
 
 Image counts      :             0            0            0        20762
 Image cts rejected:             0            0            0        18349
 Image cts rej (%) :          0.00         0.00         0.00        88.38
 
    filtering data...
 
 Total counts      :             0            0            0        20762
 Total cts rejected:             0            0            0        18349
 Total cts rej (%) :          0.00         0.00         0.00        88.38
 
 Number of clean counts accepted  :         2413
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           19
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad87044010s100212h.evt use_events=no
Wrote cleaned events file to ad87044010s100212h.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Skipping ad87044010s100301h.unf because of mode
-> Filtering ad87044010s100302h.unf into ad87044010s100302h.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&(S1_PIXL1>0)&&(S1_PIXL2>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  17:42:16    0.76E+03    26677 1111
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100302h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS1-BRIGHT > Session saved, goodbye
-> Filtering ad87044010s100312h.unf into ad87044010s100312h.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL0>0)&&(S1_PIXL1>0)&&(S1_PIXL2>0)&&(S1_PIXL3>0)  )&&(  (S1_SATF2<1)
   ||(S1_SATF2>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF0<1)
   ||(S1_SATF0>1))
&&(  (S1_SATF1<1)
   ||(S1_SATF1>1))
&&((T_DY_NT<0)||(T_DY_NT>64))
&&((T_SAA  <0)||(T_SAA  >64))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  17:42:16    0.76E+03     9105 1111
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100312h.unf
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100312h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
The selection criteria produced no GTI's
Failed to get mkf_exp
 XSL_SELECT: Status =   -10
screen:ASCA-SIS1-BRIGHT2 > Session saved, goodbye
-> Skipping ad87044010s100401l.unf because of mode
-> Filtering ad87044010s100402l.unf into ad87044010s100402l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      LOW         1999-08-13  10:59:38    0.12E+05    14012 0001
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100402l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT > extract events
!screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT > save clean outfile=ad87044010s100402l.evt use_events=no
Wrote cleaned events file to ad87044010s100402l.evt
 
!screen:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting ad87044010s100402l.evt since it contains 0 events
-> Filtering ad87044010s100412l.unf into ad87044010s100412l.evt
-> Using the following selection criteria:
(SAA==0)
&&(BR_EARTH>20)
&&(ELV>10)
&&(COR>6)
&&(ACS==0)
&&(ANG_DIST>0)&& (ANG_DIST<0.01)
&&(FOV==0)
&&
(
(S1_PIXL3>0)  )&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&(  (S1_SATF3<1)
   ||(S1_SATF3>1))
&&((T_DY_NT<0)||(T_DY_NT>16))
&&((T_SAA  <0)||(T_SAA  >16))
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     LOW         1999-08-13  10:59:38    0.12E+05    14067 0001
Processing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100412l.unf
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87044010.003/screen_work1001.xsl
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.631E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            T
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: /data/data23/seq_proc/ad0_87044010.003/screen_in_event.xs
    reading data file: /data/data23/seq_proc/ad0_87044010.003/screen_out_event.x
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :            0
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            0
 Number of (internal) image counts   :            0
 Number of image cts rejected (N, %) :            0 0.00
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0            0
 
 Image counts      :             0            0            0            0
 Image cts rejected:             0            0            0            0
 Image cts rej (%) :          0.00         0.00         0.00         0.00
 
    filtering data...
 
 Total counts      :             0            0            0            0
 Total cts rejected:             0            0            0            0
 Total cts rej (%) :          0.00         0.00         0.00         0.00
 
 Number of clean counts accepted  :            0
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            0
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010s100412l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4"  save_file=no
!screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-SIS1-BRIGHT2 > extract events
!screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095
!screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad87044010s100412l.evt use_events=no
Wrote cleaned events file to ad87044010s100412l.evt
 
!screen:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Deleting ad87044010s100412l.evt since it contains 0 events
-> Filtering ad87044010g200170h.unf into ad87044010g200170h.evt
-> Fetching GIS2_REGION256.4
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    17981     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17981      6637           9472      1872         0         0
 Writing events file
   6637 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17981      6637           9472      1872         0         0
   in  16230.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        6637                5889               748
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad87044010g200170h.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Filtering ad87044010g200270m.unf into ad87044010g200270m.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    16654     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16654      5951           8239      2464         0         0
 Writing events file
   5951 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16654      5951           8239      2464         0         0
   in  14112.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        5951                5215               736
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad87044010g200270m.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Filtering ad87044010g200370l.unf into ad87044010g200370l.evt
-> GIS2_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G2_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4359     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4359        10           3051      1298         0         0
 Writing events file
     10 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4359        10           3051      1298         0         0
   in  31.836     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
          10                   9                 1
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-GIS2-PH > set image det
!screen:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS2-PH > extract events
!screen:ASCA-GIS2-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS2-PH > save clean outfile=ad87044010g200370l.evt use_events=no
!screen:ASCA-GIS2-PH > exit save_session=no
-> Filtering ad87044010g300170h.unf into ad87044010g300170h.evt
-> Fetching GIS3_REGION256.4
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    16959     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16959      7347           7560      2052         0         0
 Writing events file
   7347 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16959      7347           7560      2052         0         0
   in  16228.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        7347                6531               816
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad87044010g300170h.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Filtering ad87044010g300270m.unf into ad87044010g300270m.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    15941     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          15941      6425           6693      2823         0         0
 Writing events file
   6425 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         15941      6425           6693      2823         0         0
   in  14112.     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
        6425                5654               771
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad87044010g300270m.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no
-> Filtering ad87044010g300370l.unf into ad87044010g300370l.evt
-> GIS3_REGION256.4 already present in current directory
-> Using the following selection criteria:
(SAA==0)&&
(COR>4)&&
(G2_H0+G2_H2+G3_H0+G3_H2<45)&&
(G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&&
(RBM_CONT<100)&&
(ELV>5)&&
(ACS==0)&&
(ANG_DIST>0)&& (ANG_DIST<0.01)&&
(G3_L1>0)
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] screen
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4078     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4078        20           2584      1474         0         0
 Writing events file
     20 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4078        20           2584      1474         0         0
   in  31.836     seconds
Infile # of rows    Outfile # of rows    # filtered
----------------    -----------------    ----------
          20                  18                 2
 Command not found; type ? for a command listing
!screen:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!screen:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA > read events ad87044010g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!screen:ASCA-GIS3-PH > set image det
!screen:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=.
!screen:ASCA-GIS3-PH > extract events
!screen:ASCA-GIS3-PH > gisclean
Using table:/raid2/util2/ftools/ftools.5.0.c/refdata/rti_gis_1024_040693.fits
!screen:ASCA-GIS3-PH > save clean outfile=ad87044010g300370l.evt use_events=no
!screen:ASCA-GIS3-PH > exit save_session=no

Generating images and exposure maps (19:1:40)

-> Generating exposure map ad87044010g200170.expo
-> GIS2_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:
-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(167.5,220,24.66,28.95,245.298)
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87044010g200170h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010g200170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6821
 Mean   RA/DEC/ROLL :       41.4673     -52.9840     270.6821
 Pnt    RA/DEC/ROLL :       41.5006     -52.9415     270.6821
 
 Image rebin factor :             1
 Attitude Records   :         52100
 GTI intervals      :            25
 Total GTI (secs)   :     16229.862
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1885.97      1885.97
  20 Percent Complete: Total/live time:       3607.40      3607.40
  30 Percent Complete: Total/live time:       5397.90      5397.90
  40 Percent Complete: Total/live time:       6677.31      6677.31
  50 Percent Complete: Total/live time:       8401.21      8401.21
  60 Percent Complete: Total/live time:      10219.71     10219.71
  70 Percent Complete: Total/live time:      11589.70     11589.70
  80 Percent Complete: Total/live time:      13445.87     13445.87
  90 Percent Complete: Total/live time:      16229.86     16229.86
 100 Percent Complete: Total/live time:      16229.86     16229.86
 
 Number of attitude steps  used:           65
 Number of attitude steps avail:        38607
 Mean RA/DEC pixel offset:       -8.0128      -3.2764
 
    writing expo file: ad87044010g200170.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010g200170h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010g200170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5889      5824             65         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5889      5824             65         0         0         0
   in  16230.     seconds
 Image            has     5824 counts for 0.3588     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5889      2743             65         0         0      3081
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5889      2743             65         0         0      3081
   in  16230.     seconds
 Image            has     2743 counts for 0.1690     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5889      3102             65         0         0      2722
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5889      3102             65         0         0      2722
   in  16230.     seconds
 Image            has     3102 counts for 0.1911     counts/sec
 Command not found; type ? for a command listing
!ad87044010g200170h:ASCA >
!ad87044010g200170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010g200170h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g200170h:ASCA > read events ad87044010g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g200170h:ASCA-GIS2-PH > set image sky
!ad87044010g200170h:ASCA-GIS2-PH > filter region corner_point.reg
!ad87044010g200170h:ASCA-GIS2-PH > extract image
!ad87044010g200170h:ASCA-GIS2-PH > save image outfile=ad87044010g200170_all.img
Wrote image to file ad87044010g200170_all.img
!ad87044010g200170h:ASCA-GIS2-PH > filter pha_cut 0 170
!ad87044010g200170h:ASCA-GIS2-PH > extract image
!ad87044010g200170h:ASCA-GIS2-PH > save image outfile=ad87044010g200170_lo.img
Wrote image to file ad87044010g200170_lo.img
!ad87044010g200170h:ASCA-GIS2-PH > clear pha_cut
!ad87044010g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87044010g200170h:ASCA-GIS2-PH > extract image
!ad87044010g200170h:ASCA-GIS2-PH > save image outfile=ad87044010g200170_hi.img
Wrote image to file ad87044010g200170_hi.img
!ad87044010g200170h:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad87044010g200270.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87044010g200270m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010g200270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6812
 Mean   RA/DEC/ROLL :       41.4812     -52.9774     270.6812
 Pnt    RA/DEC/ROLL :       41.1859     -53.0759     270.6812
 
 Image rebin factor :             1
 Attitude Records   :         52100
 GTI intervals      :            13
 Total GTI (secs)   :     14112.143
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1774.95      1774.95
  20 Percent Complete: Total/live time:       3018.84      3018.84
  30 Percent Complete: Total/live time:       6367.95      6367.95
  40 Percent Complete: Total/live time:       6367.95      6367.95
  50 Percent Complete: Total/live time:       7454.82      7454.82
  60 Percent Complete: Total/live time:       9930.81      9930.81
  70 Percent Complete: Total/live time:      10207.95     10207.95
  80 Percent Complete: Total/live time:      13642.79     13642.79
  90 Percent Complete: Total/live time:      13642.79     13642.79
 100 Percent Complete: Total/live time:      14112.14     14112.14
 
 Number of attitude steps  used:           42
 Number of attitude steps avail:         8662
 Mean RA/DEC pixel offset:       -7.9393      -3.6512
 
    writing expo file: ad87044010g200270.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010g200270m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010g200270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5215     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5215      5165             50         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5215      5165             50         0         0         0
   in  14112.     seconds
 Image            has     5165 counts for 0.3660     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5215      2460             50         0         0      2705
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5215      2460             50         0         0      2705
   in  14112.     seconds
 Image            has     2460 counts for 0.1743     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5215      2715             50         0         0      2450
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5215      2715             50         0         0      2450
   in  14112.     seconds
 Image            has     2715 counts for 0.1924     counts/sec
 Command not found; type ? for a command listing
!ad87044010g200270m:ASCA >
!ad87044010g200270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010g200270m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g200270m:ASCA > read events ad87044010g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g200270m:ASCA-GIS2-PH > set image sky
!ad87044010g200270m:ASCA-GIS2-PH > filter region corner_point.reg
!ad87044010g200270m:ASCA-GIS2-PH > extract image
!ad87044010g200270m:ASCA-GIS2-PH > save image outfile=ad87044010g200270_all.img
Wrote image to file ad87044010g200270_all.img
!ad87044010g200270m:ASCA-GIS2-PH > filter pha_cut 0 170
!ad87044010g200270m:ASCA-GIS2-PH > extract image
!ad87044010g200270m:ASCA-GIS2-PH > save image outfile=ad87044010g200270_lo.img
Wrote image to file ad87044010g200270_lo.img
!ad87044010g200270m:ASCA-GIS2-PH > clear pha_cut
!ad87044010g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87044010g200270m:ASCA-GIS2-PH > extract image
!ad87044010g200270m:ASCA-GIS2-PH > save image outfile=ad87044010g200270_hi.img
Wrote image to file ad87044010g200270_hi.img
!ad87044010g200270m:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad87044010g200370.expo
-> GIS2_REGION256.4 already present in current directory
-> gis2_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87044010g200370l.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010g200370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis2_ano_on_flf_180295.fits
    reading inst file: GIS2_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6818
 Mean   RA/DEC/ROLL :       41.4808     -52.9789     270.6818
 Pnt    RA/DEC/ROLL :       41.1866     -53.0764     270.6818
 
 Image rebin factor :             1
 Attitude Records   :         52100
 GTI intervals      :             1
 Total GTI (secs)   :        31.836
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         10.84        10.84
  20 Percent Complete: Total/live time:         31.84        31.84
 100 Percent Complete: Total/live time:         31.84        31.84
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:            2
 Mean RA/DEC pixel offset:       -4.2287      -1.5247
 
    writing expo file: ad87044010g200370.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010g200370l.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010g200370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02        9     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
              9         9              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             9         9              0         0         0         0
   in  31.836     seconds
 Image            has        9 counts for 0.2827     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
              9         4              0         0         0         5
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             9         4              0         0         0         5
   in  31.836     seconds
 Image            has        4 counts for 0.1256     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
              9         5              0         0         0         4
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             9         5              0         0         0         4
   in  31.836     seconds
 Image            has        5 counts for 0.1571     counts/sec
 Command not found; type ? for a command listing
!ad87044010g200370l:ASCA >
!ad87044010g200370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010g200370l:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g200370l:ASCA > read events ad87044010g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g200370l:ASCA-GIS2-PH > set image sky
!ad87044010g200370l:ASCA-GIS2-PH > filter region corner_point.reg
!ad87044010g200370l:ASCA-GIS2-PH > extract image
!ad87044010g200370l:ASCA-GIS2-PH > save image outfile=ad87044010g200370_all.img
Wrote image to file ad87044010g200370_all.img
!ad87044010g200370l:ASCA-GIS2-PH > filter pha_cut 0 170
!ad87044010g200370l:ASCA-GIS2-PH > extract image
!ad87044010g200370l:ASCA-GIS2-PH > save image outfile=ad87044010g200370_lo.img
Wrote image to file ad87044010g200370_lo.img
!ad87044010g200370l:ASCA-GIS2-PH > clear pha_cut
!ad87044010g200370l:ASCA-GIS2-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87044010g200370l:ASCA-GIS2-PH > extract image
!ad87044010g200370l:ASCA-GIS2-PH > save image outfile=ad87044010g200370_hi.img
Wrote image to file ad87044010g200370_hi.img
!ad87044010g200370l:ASCA-GIS2-PH > exit save_session=no
-> Generating exposure map ad87044010g300170.expo
-> GIS3_REGION256.4 already present in current directory
-> Standard Output From STOOL regionmap:
-ANNULUS(128.5,128.5,192,88)
-ELLIPSE(217,95,21.56,25.92,169.216)
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87044010g300170h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010g300170h.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6793
 Mean   RA/DEC/ROLL :       41.4709     -52.9593     270.6793
 Pnt    RA/DEC/ROLL :       41.4971     -52.9662     270.6793
 
 Image rebin factor :             1
 Attitude Records   :         52100
 GTI intervals      :            25
 Total GTI (secs)   :     16227.862
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1885.97      1885.97
  20 Percent Complete: Total/live time:       3607.40      3607.40
  30 Percent Complete: Total/live time:       5397.90      5397.90
  40 Percent Complete: Total/live time:       6675.31      6675.31
  50 Percent Complete: Total/live time:       8399.21      8399.21
  60 Percent Complete: Total/live time:      10217.71     10217.71
  70 Percent Complete: Total/live time:      11587.70     11587.70
  80 Percent Complete: Total/live time:      13443.87     13443.87
  90 Percent Complete: Total/live time:      16227.86     16227.86
 100 Percent Complete: Total/live time:      16227.86     16227.86
 
 Number of attitude steps  used:           65
 Number of attitude steps avail:        38603
 Mean RA/DEC pixel offset:        3.8800      -2.0950
 
    writing expo file: ad87044010g300170.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010g300170h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010g300170h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6531      6453             78         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6531      6453             78         0         0         0
   in  16228.     seconds
 Image            has     6453 counts for 0.3976     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6531      3092             78         0         0      3361
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6531      3092             78         0         0      3361
   in  16228.     seconds
 Image            has     3092 counts for 0.1905     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6531      3378             78         0         0      3075
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6531      3378             78         0         0      3075
   in  16228.     seconds
 Image            has     3378 counts for 0.2082     counts/sec
 Command not found; type ? for a command listing
!ad87044010g300170h:ASCA >
!ad87044010g300170h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010g300170h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g300170h:ASCA > read events ad87044010g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g300170h:ASCA-GIS3-PH > set image sky
!ad87044010g300170h:ASCA-GIS3-PH > filter region corner_point.reg
!ad87044010g300170h:ASCA-GIS3-PH > extract image
!ad87044010g300170h:ASCA-GIS3-PH > save image outfile=ad87044010g300170_all.img
Wrote image to file ad87044010g300170_all.img
!ad87044010g300170h:ASCA-GIS3-PH > filter pha_cut 0 170
!ad87044010g300170h:ASCA-GIS3-PH > extract image
!ad87044010g300170h:ASCA-GIS3-PH > save image outfile=ad87044010g300170_lo.img
Wrote image to file ad87044010g300170_lo.img
!ad87044010g300170h:ASCA-GIS3-PH > clear pha_cut
!ad87044010g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87044010g300170h:ASCA-GIS3-PH > extract image
!ad87044010g300170h:ASCA-GIS3-PH > save image outfile=ad87044010g300170_hi.img
Wrote image to file ad87044010g300170_hi.img
!ad87044010g300170h:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad87044010g300270.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87044010g300270m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010g300270m.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6784
 Mean   RA/DEC/ROLL :       41.4822     -52.9537     270.6784
 Pnt    RA/DEC/ROLL :       41.1820     -53.1006     270.6784
 
 Image rebin factor :             1
 Attitude Records   :         52100
 GTI intervals      :            13
 Total GTI (secs)   :     14112.143
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1774.95      1774.95
  20 Percent Complete: Total/live time:       3018.84      3018.84
  30 Percent Complete: Total/live time:       6367.95      6367.95
  40 Percent Complete: Total/live time:       6367.95      6367.95
  50 Percent Complete: Total/live time:       7454.82      7454.82
  60 Percent Complete: Total/live time:       9930.81      9930.81
  70 Percent Complete: Total/live time:      10207.95     10207.95
  80 Percent Complete: Total/live time:      13642.79     13642.79
  90 Percent Complete: Total/live time:      13642.79     13642.79
 100 Percent Complete: Total/live time:      14112.14     14112.14
 
 Number of attitude steps  used:           42
 Number of attitude steps avail:         8662
 Mean RA/DEC pixel offset:        3.8518      -2.4799
 
    writing expo file: ad87044010g300270.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010g300270m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010g300270m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5654     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5654      5581             73         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5654      5581             73         0         0         0
   in  14112.     seconds
 Image            has     5581 counts for 0.3955     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5654      2632             73         0         0      2949
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5654      2632             73         0         0      2949
   in  14112.     seconds
 Image            has     2632 counts for 0.1865     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5654      2967             73         0         0      2614
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5654      2967             73         0         0      2614
   in  14112.     seconds
 Image            has     2967 counts for 0.2102     counts/sec
 Command not found; type ? for a command listing
!ad87044010g300270m:ASCA >
!ad87044010g300270m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010g300270m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g300270m:ASCA > read events ad87044010g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g300270m:ASCA-GIS3-PH > set image sky
!ad87044010g300270m:ASCA-GIS3-PH > filter region corner_point.reg
!ad87044010g300270m:ASCA-GIS3-PH > extract image
!ad87044010g300270m:ASCA-GIS3-PH > save image outfile=ad87044010g300270_all.img
Wrote image to file ad87044010g300270_all.img
!ad87044010g300270m:ASCA-GIS3-PH > filter pha_cut 0 170
!ad87044010g300270m:ASCA-GIS3-PH > extract image
!ad87044010g300270m:ASCA-GIS3-PH > save image outfile=ad87044010g300270_lo.img
Wrote image to file ad87044010g300270_lo.img
!ad87044010g300270m:ASCA-GIS3-PH > clear pha_cut
!ad87044010g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87044010g300270m:ASCA-GIS3-PH > extract image
!ad87044010g300270m:ASCA-GIS3-PH > save image outfile=ad87044010g300270_hi.img
Wrote image to file ad87044010g300270_hi.img
!ad87044010g300270m:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad87044010g300370.expo
-> GIS3_REGION256.4 already present in current directory
-> gis3_ano_on_flf_180295.fits already present in current directory
-> Running ascaexpo for ad87044010g300370l.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010g300370l.evt
    reading   gti ext: STDGTI
    reading  cal file: gis3_ano_on_flf_180295.fits
    reading inst file: GIS3_REGION256.4_regionmap.tmp
 
    making an inst map...
 rebin gis:  1
     multiply inst map...
 
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6790
 Mean   RA/DEC/ROLL :       41.4880     -52.9525     270.6790
 Pnt    RA/DEC/ROLL :       41.1828     -53.1011     270.6790
 
 Image rebin factor :             1
 Attitude Records   :         52100
 GTI intervals      :             1
 Total GTI (secs)   :        31.836
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:         10.84        10.84
  20 Percent Complete: Total/live time:         31.84        31.84
 100 Percent Complete: Total/live time:         31.84        31.84
 
 Number of attitude steps  used:            2
 Number of attitude steps avail:            2
 Mean RA/DEC pixel offset:        1.8106      -0.9247
 
    writing expo file: ad87044010g300370.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010g300370l.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010g300370l
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02       18     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             18        18              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            18        18              0         0         0         0
   in  31.836     seconds
 Image            has       18 counts for 0.5654     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             18         4              0         0         0        14
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            18         4              0         0         0        14
   in  31.836     seconds
 Image            has        4 counts for 0.1256     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             18        14              0         0         0         4
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            18        14              0         0         0         4
   in  31.836     seconds
 Image            has       14 counts for 0.4398     counts/sec
 Command not found; type ? for a command listing
!ad87044010g300370l:ASCA >
!ad87044010g300370l:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010g300370l:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g300370l:ASCA > read events ad87044010g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010g300370l:ASCA-GIS3-PH > set image sky
!ad87044010g300370l:ASCA-GIS3-PH > filter region corner_point.reg
!ad87044010g300370l:ASCA-GIS3-PH > extract image
!ad87044010g300370l:ASCA-GIS3-PH > save image outfile=ad87044010g300370_all.img
Wrote image to file ad87044010g300370_all.img
!ad87044010g300370l:ASCA-GIS3-PH > filter pha_cut 0 170
!ad87044010g300370l:ASCA-GIS3-PH > extract image
!ad87044010g300370l:ASCA-GIS3-PH > save image outfile=ad87044010g300370_lo.img
Wrote image to file ad87044010g300370_lo.img
!ad87044010g300370l:ASCA-GIS3-PH > clear pha_cut
!ad87044010g300370l:ASCA-GIS3-PH > filter pha_cut 170 1024
Warning: your PI upper bound:  1024 is above the maximum value.
!ad87044010g300370l:ASCA-GIS3-PH > extract image
!ad87044010g300370l:ASCA-GIS3-PH > save image outfile=ad87044010g300370_hi.img
Wrote image to file ad87044010g300370_hi.img
!ad87044010g300370l:ASCA-GIS3-PH > exit save_session=no
-> Generating exposure map ad87044010s000102.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87044010s000102m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010s000102m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6996
 Mean   RA/DEC/ROLL :       41.4566     -52.9652     270.6996
 Pnt    RA/DEC/ROLL :       41.2092     -53.0884     270.6996
 
 Image rebin factor :             4
 Attitude Records   :         52100
 Hot Pixels         :            13
 GTI intervals      :            43
 Total GTI (secs)   :     10544.550
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1318.95      1318.95
  20 Percent Complete: Total/live time:       2280.25      2280.25
  30 Percent Complete: Total/live time:       5064.25      5064.25
  40 Percent Complete: Total/live time:       5064.25      5064.25
  50 Percent Complete: Total/live time:       6951.12      6951.12
  60 Percent Complete: Total/live time:       6951.12      6951.12
  70 Percent Complete: Total/live time:       7603.11      7603.11
  80 Percent Complete: Total/live time:      10536.25     10536.25
  90 Percent Complete: Total/live time:      10536.25     10536.25
 100 Percent Complete: Total/live time:      10544.55     10544.55
 
 Number of attitude steps  used:           34
 Number of attitude steps avail:         5838
 Mean RA/DEC pixel offset:      -17.9847     -95.7434
 
    writing expo file: ad87044010s000102.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010s000102m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010s000102m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.11E+05     2075 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2075      2075              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2075      2075              0         0         0         0
   in  10545.     seconds
 Image            has     2075 counts for 0.1968     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2075      1219              0         0         0       856
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2075      1219              0         0         0       856
   in  10545.     seconds
 Image            has     1219 counts for 0.1156     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2075       856              0         0         0      1219
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2075       856              0         0         0      1219
   in  10545.     seconds
 Image            has      856 counts for 8.1179E-02 counts/sec
 Command not found; type ? for a command listing
!ad87044010s000102m:ASCA >
!ad87044010s000102m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010s000102m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s000102m:ASCA > read events ad87044010s000102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s000102m:ASCA-SIS0-BRIGHT > set image sky
!ad87044010s000102m:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad87044010s000102m:ASCA-SIS0-BRIGHT > extract image
!ad87044010s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad87044010s000102_all.img
Wrote image to file ad87044010s000102_all.img
!ad87044010s000102m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad87044010s000102m:ASCA-SIS0-BRIGHT > extract image
!ad87044010s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad87044010s000102_lo.img
Wrote image to file ad87044010s000102_lo.img
!ad87044010s000102m:ASCA-SIS0-BRIGHT > clear pha_cut
!ad87044010s000102m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87044010s000102m:ASCA-SIS0-BRIGHT > extract image
!ad87044010s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad87044010s000102_hi.img
Wrote image to file ad87044010s000102_hi.img
!ad87044010s000102m:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad87044010s000202.expo
-> s0_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87044010s000202h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010s000202h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s0_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF          ON         OFF         OFF
 AREA DISC  IN/OUT:          OUT         OUT          IN          IN
 AREA DISC H START:            6           6           6         316
 AREA DISC H  STOP:          425         425         200         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         150         112
  
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.7010
 Mean   RA/DEC/ROLL :       41.4433     -52.9719     270.7010
 Pnt    RA/DEC/ROLL :       41.5412     -52.9504     270.7010
 
 Image rebin factor :             4
 Attitude Records   :         52100
 Hot Pixels         :            14
 GTI intervals      :            28
 Total GTI (secs)   :     14895.315
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1760.00      1760.00
  20 Percent Complete: Total/live time:       3365.61      3365.61
  30 Percent Complete: Total/live time:       5419.98      5419.98
  40 Percent Complete: Total/live time:       6571.19      6571.19
  50 Percent Complete: Total/live time:       8067.77      8067.77
  60 Percent Complete: Total/live time:       9209.95      9209.95
  70 Percent Complete: Total/live time:      10739.32     10739.32
  80 Percent Complete: Total/live time:      12499.32     12499.32
  90 Percent Complete: Total/live time:      13570.13     13570.13
 100 Percent Complete: Total/live time:      14895.32     14895.32
 
 Number of attitude steps  used:           63
 Number of attitude steps avail:        35270
 Mean RA/DEC pixel offset:      -18.7760     -94.2720
 
    writing expo file: ad87044010s000202.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010s000202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010s000202h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2843 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2843      2843              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2843      2843              0         0         0         0
   in  14895.     seconds
 Image            has     2843 counts for 0.1909     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2843      1743              0         0         0      1100
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2843      1743              0         0         0      1100
   in  14895.     seconds
 Image            has     1743 counts for 0.1170     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2843      1103              0         0         0      1740
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2843      1103              0         0         0      1740
   in  14895.     seconds
 Image            has     1103 counts for 7.4050E-02 counts/sec
 Command not found; type ? for a command listing
!ad87044010s000202h:ASCA >
!ad87044010s000202h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010s000202h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s000202h:ASCA > read events ad87044010s000202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s000202h:ASCA-SIS0-BRIGHT > set image sky
!ad87044010s000202h:ASCA-SIS0-BRIGHT > filter region corner_point.reg
!ad87044010s000202h:ASCA-SIS0-BRIGHT > extract image
!ad87044010s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad87044010s000202_all.img
Wrote image to file ad87044010s000202_all.img
!ad87044010s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547
!ad87044010s000202h:ASCA-SIS0-BRIGHT > extract image
!ad87044010s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad87044010s000202_lo.img
Wrote image to file ad87044010s000202_lo.img
!ad87044010s000202h:ASCA-SIS0-BRIGHT > clear pha_cut
!ad87044010s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87044010s000202h:ASCA-SIS0-BRIGHT > extract image
!ad87044010s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad87044010s000202_hi.img
Wrote image to file ad87044010s000202_hi.img
!ad87044010s000202h:ASCA-SIS0-BRIGHT > exit save_session=no
-> Generating exposure map ad87044010s100102.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87044010s100102m.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010s100102m.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6786
 Mean   RA/DEC/ROLL :       41.4808     -52.9670     270.6786
 Pnt    RA/DEC/ROLL :       41.1827     -53.0875     270.6786
 
 Image rebin factor :             4
 Attitude Records   :         52100
 Hot Pixels         :            13
 GTI intervals      :            68
 Total GTI (secs)   :      9488.550
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1158.95      1158.95
  20 Percent Complete: Total/live time:       1999.15      1999.15
  30 Percent Complete: Total/live time:       3048.25      3048.25
  40 Percent Complete: Total/live time:       4904.25      4904.25
  50 Percent Complete: Total/live time:       4904.25      4904.25
  60 Percent Complete: Total/live time:       6567.12      6567.12
  70 Percent Complete: Total/live time:       7048.25      7048.25
  80 Percent Complete: Total/live time:       9480.25      9480.25
  90 Percent Complete: Total/live time:       9480.25      9480.25
 100 Percent Complete: Total/live time:       9488.55      9488.55
 
 Number of attitude steps  used:           39
 Number of attitude steps avail:         5862
 Mean RA/DEC pixel offset:      -22.1650     -27.0879
 
    writing expo file: ad87044010s100102.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010s100102m.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010s100102m
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.95E+04     1574 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1574      1574              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1574      1574              0         0         0         0
   in  9488.5     seconds
 Image            has     1574 counts for 0.1659     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1574       935              0         0         0       639
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1574       935              0         0         0       639
   in  9488.5     seconds
 Image            has      935 counts for 9.8540E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1574       641              0         0         0       933
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1574       641              0         0         0       933
   in  9488.5     seconds
 Image            has      641 counts for 6.7555E-02 counts/sec
 Command not found; type ? for a command listing
!ad87044010s100102m:ASCA >
!ad87044010s100102m:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010s100102m:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s100102m:ASCA > read events ad87044010s100102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s100102m:ASCA-SIS1-BRIGHT > set image sky
!ad87044010s100102m:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad87044010s100102m:ASCA-SIS1-BRIGHT > extract image
!ad87044010s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad87044010s100102_all.img
Wrote image to file ad87044010s100102_all.img
!ad87044010s100102m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad87044010s100102m:ASCA-SIS1-BRIGHT > extract image
!ad87044010s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad87044010s100102_lo.img
Wrote image to file ad87044010s100102_lo.img
!ad87044010s100102m:ASCA-SIS1-BRIGHT > clear pha_cut
!ad87044010s100102m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87044010s100102m:ASCA-SIS1-BRIGHT > extract image
!ad87044010s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad87044010s100102_hi.img
Wrote image to file ad87044010s100102_hi.img
!ad87044010s100102m:ASCA-SIS1-BRIGHT > exit save_session=no
-> Generating exposure map ad87044010s100202.expo
-> s1_teldef_ascalin.fits already present in current directory
-> Running ascaexpo for ad87044010s100202h.evt
-> Standard Output From FTOOL ascaexpo:
ASCAEXPO_V0.9b
 
    reading data file: ad87044010s100202h.evt
    reading   gti ext: STDGTI
    reading    hp ext: HOT_PIXELS
    reading  cal file: s1_teldef_ascalin.fits
 
    making an inst map...
  
 SIS AREA DISC ENABL         OFF
  
              CHIP:            0           1           2           3
  
 CCD POWER  ON/OFF:          OFF         OFF         OFF          ON
 AREA DISC  IN/OUT:          OUT         OUT         OUT         OUT
 AREA DISC H START:            6           6           6           6
 AREA DISC H  STOP:          425         425         425         425
 AREA DISC V START:            2           2           2           2
 AREA DISC V  STOP:          422         422         422         422
  
    reading att  file: ./fa990813_1052.0445
 
    making an exposure map...
 
 Aspect RA/DEC/ROLL :       41.4784     -52.9674     270.6799
 Mean   RA/DEC/ROLL :       41.4698     -52.9726     270.6799
 Pnt    RA/DEC/ROLL :       41.5149     -52.9497     270.6799
 
 Image rebin factor :             4
 Attitude Records   :         52100
 Hot Pixels         :            19
 GTI intervals      :            23
 Total GTI (secs)   :     14867.538
 
 Max attitude excursion (arcsecs) :         5.000
 
   0 Percent Complete: Total/live time:          0.00         0.00
  10 Percent Complete: Total/live time:       1760.00      1760.00
  20 Percent Complete: Total/live time:       3377.61      3377.61
  30 Percent Complete: Total/live time:       5419.98      5419.98
  40 Percent Complete: Total/live time:       6567.19      6567.19
  50 Percent Complete: Total/live time:       8063.77      8063.77
  60 Percent Complete: Total/live time:       9206.17      9206.17
  70 Percent Complete: Total/live time:      10735.54     10735.54
  80 Percent Complete: Total/live time:      12499.54     12499.54
  90 Percent Complete: Total/live time:      13538.35     13538.35
 100 Percent Complete: Total/live time:      14867.54     14867.54
 
 Number of attitude steps  used:           63
 Number of attitude steps avail:        35270
 Mean RA/DEC pixel offset:      -23.1497     -23.5614
 
    writing expo file: ad87044010s100202.expo
    closing attitude file...
    closing data file...
-> Generating low and high energy images for ad87044010s100202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] ad87044010s100202h
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2369 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2369      2369              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2369      2369              0         0         0         0
   in  14868.     seconds
 Image            has     2369 counts for 0.1593     counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2369      1419              0         0         0       950
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2369      1419              0         0         0       950
   in  14868.     seconds
 Image            has     1419 counts for 9.5443E-02 counts/sec
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2369       953              0         0         0      1416
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2369       953              0         0         0      1416
   in  14868.     seconds
 Image            has      953 counts for 6.4099E-02 counts/sec
 Command not found; type ? for a command listing
!ad87044010s100202h:ASCA >
!ad87044010s100202h:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!ad87044010s100202h:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s100202h:ASCA > read events ad87044010s100202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!ad87044010s100202h:ASCA-SIS1-BRIGHT > set image sky
!ad87044010s100202h:ASCA-SIS1-BRIGHT > filter region corner_point.reg
!ad87044010s100202h:ASCA-SIS1-BRIGHT > extract image
!ad87044010s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad87044010s100202_all.img
Wrote image to file ad87044010s100202_all.img
!ad87044010s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547
!ad87044010s100202h:ASCA-SIS1-BRIGHT > extract image
!ad87044010s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad87044010s100202_lo.img
Wrote image to file ad87044010s100202_lo.img
!ad87044010s100202h:ASCA-SIS1-BRIGHT > clear pha_cut
!ad87044010s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048
Warning: your PI upper bound:  2048 is above the maximum value.
!ad87044010s100202h:ASCA-SIS1-BRIGHT > extract image
!ad87044010s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad87044010s100202_hi.img
Wrote image to file ad87044010s100202_hi.img
!ad87044010s100202h:ASCA-SIS1-BRIGHT > exit save_session=no
-> Summing sis images
-> Exposure for ad87044010s000102.expo is 10544.549805 seconds
-> Exposure for ad87044010s000202.expo is 14895.314453 seconds
-> Exposure for ad87044010s100102.expo is 9488.548828 seconds
-> Exposure for ad87044010s100202.expo is 14867.537109 seconds
-> Summing the following images to produce ad87044010sis32002.totexpo
ad87044010s000102.expo
ad87044010s000202.expo
ad87044010s100102.expo
ad87044010s100202.expo
-> Setting EXPOSURE=49795.950195 in ad87044010sis32002.totexpo
-> Exposure for ad87044010s000102_all.img is 1.054454912012815E+04 seconds
-> ad87044010s000102_all.img has 2075 counts
-> Exposure for ad87044010s000202_all.img is 1.489531607872248E+04 seconds
-> ad87044010s000202_all.img has 2843 counts
-> Exposure for ad87044010s100102_all.img is 9.488549120128155E+03 seconds
-> ad87044010s100102_all.img has 1574 counts
-> Exposure for ad87044010s100202_all.img is 1.486753871661425E+04 seconds
-> ad87044010s100202_all.img has 2369 counts
-> Summing the following images to produce ad87044010sis32002_all.totsky
ad87044010s000102_all.img
ad87044010s000202_all.img
ad87044010s100102_all.img
ad87044010s100202_all.img
-> Setting EXPOSURE=49795.953035593 in ad87044010sis32002_all.totsky
-> Setting TOTCTS=8861 in ad87044010sis32002_all.totsky
-> Exposure for ad87044010s000102_lo.img is 1.054454912012815E+04 seconds
-> ad87044010s000102_lo.img has 1219 counts
-> Exposure for ad87044010s000202_lo.img is 1.489531607872248E+04 seconds
-> ad87044010s000202_lo.img has 1743 counts
-> Exposure for ad87044010s100102_lo.img is 9.488549120128155E+03 seconds
-> ad87044010s100102_lo.img has 935 counts
-> Exposure for ad87044010s100202_lo.img is 1.486753871661425E+04 seconds
-> ad87044010s100202_lo.img has 1419 counts
-> Summing the following images to produce ad87044010sis32002_lo.totsky
ad87044010s000102_lo.img
ad87044010s000202_lo.img
ad87044010s100102_lo.img
ad87044010s100202_lo.img
-> Setting EXPOSURE=49795.953035593 in ad87044010sis32002_lo.totsky
-> Setting TOTCTS=5316 in ad87044010sis32002_lo.totsky
-> Exposure for ad87044010s000102_hi.img is 1.054454912012815E+04 seconds
-> ad87044010s000102_hi.img has 856 counts
-> Exposure for ad87044010s000202_hi.img is 1.489531607872248E+04 seconds
-> ad87044010s000202_hi.img has 1103 counts
-> Exposure for ad87044010s100102_hi.img is 9.488549120128155E+03 seconds
-> ad87044010s100102_hi.img has 641 counts
-> Exposure for ad87044010s100202_hi.img is 1.486753871661425E+04 seconds
-> ad87044010s100202_hi.img has 953 counts
-> Summing the following images to produce ad87044010sis32002_hi.totsky
ad87044010s000102_hi.img
ad87044010s000202_hi.img
ad87044010s100102_hi.img
ad87044010s100202_hi.img
-> Setting EXPOSURE=49795.953035593 in ad87044010sis32002_hi.totsky
-> Setting TOTCTS=3553 in ad87044010sis32002_hi.totsky
-> Running XIMAGE to create ad87044010sis32002.gif
-> Standard Output From STOOL ximage:
 No of detectors read in:   21
![1]XIMAGE> read/fits ad87044010sis32002_all.totsky
 Telescope ASCA SIS0,SIS1
 Image size = 320 x 320 pixels
 Image rebin = 4
 Image center = 640.5, 640.5
 Reading an image
  Image level, min = 0.0000000 max = 14.000000
 Saving current map
![2]XIMAGE> read/expo ad87044010sis32002.totexpo
 Telescope ASCA SIS0,SIS1
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 829.93256
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.15912
  Scaling factor :     3.57143
  Min and max :   0  26
 Max-preserving scaling factor :     1.9230769
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     1345.34
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit
-> Summing gis images
-> Exposure for ad87044010g200170.expo is 16229.859375 seconds
-> Exposure for ad87044010g200270.expo is 14112.142578 seconds
-> Exposure for ad87044010g200370.expo is 31.835817 seconds
-> Exposure for ad87044010g300170.expo is 16227.859375 seconds
-> Exposure for ad87044010g300270.expo is 14112.142578 seconds
-> Exposure for ad87044010g300370.expo is 31.835817 seconds
-> Summing the following images to produce ad87044010gis25670.totexpo
ad87044010g200170.expo
ad87044010g200270.expo
ad87044010g200370.expo
ad87044010g300170.expo
ad87044010g300270.expo
ad87044010g300370.expo
-> Setting EXPOSURE=60745.67554 in ad87044010gis25670.totexpo
-> Exposure for ad87044010g200170_all.img is 1.622986137044430E+04 seconds
-> ad87044010g200170_all.img has 5824 counts
-> Exposure for ad87044010g200270_all.img is 1.411214225503802E+04 seconds
-> ad87044010g200270_all.img has 5165 counts
-> Exposure for ad87044010g200370_all.img is 3.183581802248955E+01 seconds
-> ad87044010g200370_all.img has 9 counts
-> Exposure for ad87044010g300170_all.img is 1.622786137643456E+04 seconds
-> ad87044010g300170_all.img has 6453 counts
-> Exposure for ad87044010g300270_all.img is 1.411214225503802E+04 seconds
-> ad87044010g300270_all.img has 5581 counts
-> Exposure for ad87044010g300370_all.img is 3.183581802248955E+01 seconds
-> ad87044010g300370_all.img has 18 counts
-> Summing the following images to produce ad87044010gis25670_all.totsky
ad87044010g200170_all.img
ad87044010g200270_all.img
ad87044010g200370_all.img
ad87044010g300170_all.img
ad87044010g300270_all.img
ad87044010g300370_all.img
-> Setting EXPOSURE=60745.6788929999 in ad87044010gis25670_all.totsky
-> Setting TOTCTS=23050 in ad87044010gis25670_all.totsky
-> Exposure for ad87044010g200170_lo.img is 1.622986137044430E+04 seconds
-> ad87044010g200170_lo.img has 2743 counts
-> Exposure for ad87044010g200270_lo.img is 1.411214225503802E+04 seconds
-> ad87044010g200270_lo.img has 2460 counts
-> Exposure for ad87044010g200370_lo.img is 3.183581802248955E+01 seconds
-> ad87044010g200370_lo.img has 4 counts
-> Exposure for ad87044010g300170_lo.img is 1.622786137643456E+04 seconds
-> ad87044010g300170_lo.img has 3092 counts
-> Exposure for ad87044010g300270_lo.img is 1.411214225503802E+04 seconds
-> ad87044010g300270_lo.img has 2632 counts
-> Exposure for ad87044010g300370_lo.img is 3.183581802248955E+01 seconds
-> ad87044010g300370_lo.img has 4 counts
-> Summing the following images to produce ad87044010gis25670_lo.totsky
ad87044010g200170_lo.img
ad87044010g200270_lo.img
ad87044010g200370_lo.img
ad87044010g300170_lo.img
ad87044010g300270_lo.img
ad87044010g300370_lo.img
-> Setting EXPOSURE=60745.6788929999 in ad87044010gis25670_lo.totsky
-> Setting TOTCTS=10935 in ad87044010gis25670_lo.totsky
-> Exposure for ad87044010g200170_hi.img is 1.622986137044430E+04 seconds
-> ad87044010g200170_hi.img has 3102 counts
-> Exposure for ad87044010g200270_hi.img is 1.411214225503802E+04 seconds
-> ad87044010g200270_hi.img has 2715 counts
-> Exposure for ad87044010g200370_hi.img is 3.183581802248955E+01 seconds
-> ad87044010g200370_hi.img has 5 counts
-> Exposure for ad87044010g300170_hi.img is 1.622786137643456E+04 seconds
-> ad87044010g300170_hi.img has 3378 counts
-> Exposure for ad87044010g300270_hi.img is 1.411214225503802E+04 seconds
-> ad87044010g300270_hi.img has 2967 counts
-> Exposure for ad87044010g300370_hi.img is 3.183581802248955E+01 seconds
-> ad87044010g300370_hi.img has 14 counts
-> Summing the following images to produce ad87044010gis25670_hi.totsky
ad87044010g200170_hi.img
ad87044010g200270_hi.img
ad87044010g200370_hi.img
ad87044010g300170_hi.img
ad87044010g300270_hi.img
ad87044010g300370_hi.img
-> Setting EXPOSURE=60745.6788929999 in ad87044010gis25670_hi.totsky
-> Setting TOTCTS=12181 in ad87044010gis25670_hi.totsky
-> Running XIMAGE to create ad87044010gis25670.gif
-> Standard Output From STOOL ximage:
 No of detectors read in:   21
![1]XIMAGE> read/fits ad87044010gis25670_all.totsky
 Telescope ASCA GIS2,GIS3
 Image size = 256 x 256 pixels
 Image rebin = 1
 Image center = 128.5, 128.5
 Reading an image
  Image level, min = 0.0000000 max = 31.000000
 Saving current map
![2]XIMAGE> read/expo ad87044010gis25670.totexpo
 Telescope ASCA GIS2,GIS3
WARNING:  assuming DRPIX based on mission info
 Reading an image
  Image level, min = 0.0000000 max = 1012.4280
![3]XIMAGE> smooth
 Sigma (arcmin) :    0.36837
  Scaling factor :     1.61290
  Min and max :   0  36
 Max-preserving scaling factor :     1.3888889
![4]XIMAGE> cpd /ppm
![5]XIMAGE> cey 2000
![6]XIMAGE> disp/correct/noframe
 The image is exposure corrected
 Displaying image
  Min =  0. Max =     150305.
![7]XIMAGE> grid
![8]XIMAGE> scale
![9]XIMAGE> exit

Detecting sources in summed images (19:23:47)

-> Smoothing ad87044010gis25670_all.totsky with ad87044010gis25670.totexpo
-> Clipping exposures below 9111.851331 seconds
-> Detecting sources in ad87044010gis25670_all.smooth
-> Standard Output From STOOL ascasource:
141 113 0.00037497 111 11 32.9454
-> Smoothing ad87044010gis25670_hi.totsky with ad87044010gis25670.totexpo
-> Clipping exposures below 9111.851331 seconds
-> Detecting sources in ad87044010gis25670_hi.smooth
-> Standard Output From STOOL ascasource:
140 112 0.000188399 111 11 31.5224
-> Smoothing ad87044010gis25670_lo.totsky with ad87044010gis25670.totexpo
-> Clipping exposures below 9111.851331 seconds
-> Detecting sources in ad87044010gis25670_lo.smooth
-> Standard Output From STOOL ascasource:
141 113 0.000201203 29 11 37.2166
-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:
141 113 24 T
-> Sources with radius >= 2
141 113 24 T
-> Standard Output From STOOL colorpic:
color plane 0
color plane 1
color plane 2
writing image
image written
-> Creating fits catalog of sources: ad87044010gis25670.src
-> Smoothing ad87044010sis32002_all.totsky with ad87044010sis32002.totexpo
-> Clipping exposures below 7469.39252925 seconds
-> Detecting sources in ad87044010sis32002_all.smooth
-> Standard Output From STOOL ascasource:
189 122 0.000149499 99 22 36.7516
-> Smoothing ad87044010sis32002_hi.totsky with ad87044010sis32002.totexpo
-> Clipping exposures below 7469.39252925 seconds
-> Detecting sources in ad87044010sis32002_hi.smooth
-> Standard Output From STOOL ascasource:
189 122 5.86393e-05 99 22 28.2858
-> Smoothing ad87044010sis32002_lo.totsky with ad87044010sis32002.totexpo
-> Clipping exposures below 7469.39252925 seconds
-> Detecting sources in ad87044010sis32002_lo.smooth
-> Standard Output From STOOL ascasource:
190 124 9.2377e-05 100 22 41.752
-> Determining extraction radii
-> Eliminating redundant sources
-> Standard Output From STOOL sift_sources:
189 122 38 T
-> Sources with radius >= 2
189 122 38 T
-> Standard Output From STOOL colorpic:
color plane 0
color plane 1
color plane 2
writing image
image written
-> Creating fits catalog of sources: ad87044010sis32002.src
-> Generating region files
-> Converting (756.0,488.0,2.0) to s0 detector coordinates
-> Using events in: ad87044010s000102m.evt
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   1440.0000
 The mean of the selected column is                  480.00000
 The standard deviation of the selected column is    2.0000000
 The minimum of selected column is                   478.00000
 The maximum of selected column is                   482.00000
 The number of points used in calculation is                3
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   1435.0000
 The mean of the selected column is                  478.33333
 The standard deviation of the selected column is    3.0550505
 The minimum of selected column is                   475.00000
 The maximum of selected column is                   481.00000
 The number of points used in calculation is                3
-> Converting (756.0,488.0,2.0) to s1 detector coordinates
-> Using events in: ad87044010s100102m.evt
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   962.00000
 The mean of the selected column is                  481.00000
 The standard deviation of the selected column is    1.4142136
 The minimum of selected column is                   480.00000
 The maximum of selected column is                   482.00000
 The number of points used in calculation is                2
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   1026.0000
 The mean of the selected column is                  513.00000
 The standard deviation of the selected column is    1.4142136
 The minimum of selected column is                   512.00000
 The maximum of selected column is                   514.00000
 The number of points used in calculation is                2
-> Converting (141.0,113.0,2.0) to g2 detector coordinates
-> Using events in: ad87044010g200170h.evt
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   7757.0000
 The mean of the selected column is                  109.25352
 The standard deviation of the selected column is    1.1047729
 The minimum of selected column is                   107.00000
 The maximum of selected column is                   111.00000
 The number of points used in calculation is               71
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   8187.0000
 The mean of the selected column is                  115.30986
 The standard deviation of the selected column is    1.1413219
 The minimum of selected column is                   114.00000
 The maximum of selected column is                   118.00000
 The number of points used in calculation is               71
-> Converting (141.0,113.0,2.0) to g3 detector coordinates
-> Using events in: ad87044010g300170h.evt
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   11171.000
 The mean of the selected column is                  115.16495
 The standard deviation of the selected column is    1.0275417
 The minimum of selected column is                   113.00000
 The maximum of selected column is                   118.00000
 The number of points used in calculation is               97
-> Standard Output From FTOOL fstatistic:
 The sum of the selected column is                   11233.000
 The mean of the selected column is                  115.80412
 The standard deviation of the selected column is    1.1423584
 The minimum of selected column is                   113.00000
 The maximum of selected column is                   118.00000
 The number of points used in calculation is               97

Extracting spectra and generating response matrices (19:30:15)

-> Fetching xrt_ea_v2_0.fits
-> Fetching xrt_psf_v2_0.fits
-> sisph2pi_110397.fits already present in current directory
-> Fetching sisechos_290296.fits
-> Fetching sisrddis_290296.fits
-> Standard Output From STOOL group_event_files:
1 ad87044010s000102m.evt 4918
1 ad87044010s000202h.evt 4918
-> Fetching SIS0_NOTCHIP0.1
-> Fetching SIS0_NOTCHIP2.1
-> Fetching SIS0_NOTCHIP3.1
-> Fetching SIS0_OFFCHIP.2
-> Extracting ad87044010s010102_1.pi from ad87044010s032002_1.reg and:
ad87044010s000102m.evt
ad87044010s000202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.11E+05     2075 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.11E+05     2075 0100
      2 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2843 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2075      1675            400         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2843      2307            536         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4918      3982            936         0         0         0
   in  25440.     seconds
 Spectrum         has     3982 counts for 0.1565     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 25440.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.52730E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s010102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s000102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad87044010s000202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT > set phaname PI
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad87044010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT > filter region ad87044010s010102.discrim
!xsel:ASCA-SIS0-BRIGHT > extract spectrum
!xsel:ASCA-SIS0-BRIGHT > save spectrum ad87044010s010102_1.pi group=yes
Wrote spectrum to ad87044010s010102_1.pi
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Deleting BLANK keyword from ad87044010s010102_1.pi
-> Grouping ad87044010s010102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 25440.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.52730E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      22  are grouped by a factor        3
 ...        23 -      26  are grouped by a factor        2
 ...        27 -      57  are single channels
 ...        58 -      65  are grouped by a factor        2
 ...        66 -      66  are single channels
 ...        67 -      72  are grouped by a factor        2
 ...        73 -      84  are grouped by a factor        3
 ...        85 -      86  are grouped by a factor        2
 ...        87 -      90  are grouped by a factor        4
 ...        91 -      99  are grouped by a factor        3
 ...       100 -     119  are grouped by a factor        4
 ...       120 -     125  are grouped by a factor        3
 ...       126 -     129  are grouped by a factor        4
 ...       130 -     139  are grouped by a factor        5
 ...       140 -     146  are grouped by a factor        7
 ...       147 -     152  are grouped by a factor        6
 ...       153 -     159  are grouped by a factor        7
 ...       160 -     175  are grouped by a factor        8
 ...       176 -     184  are grouped by a factor        9
 ...       185 -     199  are grouped by a factor       15
 ...       200 -     221  are grouped by a factor       22
 ...       222 -     260  are grouped by a factor       39
 ...       261 -     420  are grouped by a factor      160
 ...       421 -     511  are grouped by a factor       91
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s010102_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 1
-> Fetching sis0c1p40_290296.fits
-> Generating ad87044010s010102_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S0C1 Bright PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad87044010s010102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  328  328
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.169     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 3.95300E+03
 Weighted mean angle from optical axis  =  5.436 arcmin
-> Standard Output From STOOL group_event_files:
1 ad87044010s000112m.evt 5051
1 ad87044010s000212h.evt 5051
-> SIS0_NOTCHIP0.1 already present in current directory
-> SIS0_NOTCHIP2.1 already present in current directory
-> SIS0_NOTCHIP3.1 already present in current directory
-> SIS0_OFFCHIP.2 already present in current directory
-> Extracting ad87044010s010212_1.pi from ad87044010s032002_1.reg and:
ad87044010s000112m.evt
ad87044010s000212h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.11E+05     2134 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.11E+05     2134 0100
      2 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.15E+05     2917 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2134      1705            429         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2917      2346            571         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5051      4051           1000         0         0         0
   in  25440.     seconds
 Spectrum         has     4051 counts for 0.1592     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 25440.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.52730E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      31  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s010212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s000112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > read events ad87044010s000212h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87044010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1
!xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.2
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87044010s010212.discrim
!xsel:ASCA-SIS0-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad87044010s010212_1.pi group=yes
Wrote spectrum to ad87044010s010212_1.pi
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Deleting BLANK keyword from ad87044010s010212_1.pi
-> Grouping ad87044010s010212_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS0            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 25440.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.52730E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      31  of undefined grouping (Channel quality=bad)
 ...        32 -      41  are grouped by a factor        5
 ...        42 -      49  are grouped by a factor        4
 ...        50 -      55  are grouped by a factor        3
 ...        56 -      75  are grouped by a factor        2
 ...        76 -      76  are single channels
 ...        77 -      80  are grouped by a factor        2
 ...        81 -      81  are single channels
 ...        82 -      97  are grouped by a factor        2
 ...        98 -      99  are single channels
 ...       100 -     115  are grouped by a factor        2
 ...       116 -     130  are grouped by a factor        3
 ...       131 -     134  are grouped by a factor        2
 ...       135 -     137  are grouped by a factor        3
 ...       138 -     153  are grouped by a factor        4
 ...       154 -     160  are grouped by a factor        7
 ...       161 -     164  are grouped by a factor        4
 ...       165 -     170  are grouped by a factor        6
 ...       171 -     174  are grouped by a factor        4
 ...       175 -     182  are grouped by a factor        8
 ...       183 -     189  are grouped by a factor        7
 ...       190 -     199  are grouped by a factor        5
 ...       200 -     205  are grouped by a factor        6
 ...       206 -     261  are grouped by a factor        7
 ...       262 -     271  are grouped by a factor       10
 ...       272 -     295  are grouped by a factor       12
 ...       296 -     309  are grouped by a factor       14
 ...       310 -     321  are grouped by a factor       12
 ...       322 -     335  are grouped by a factor       14
 ...       336 -     350  are grouped by a factor       15
 ...       351 -     366  are grouped by a factor       16
 ...       367 -     397  are grouped by a factor       31
 ...       398 -     439  are grouped by a factor       42
 ...       440 -     506  are grouped by a factor       67
 ...       507 -     670  are grouped by a factor      164
 ...       671 -    1000  are grouped by a factor      330
 ...      1001 -    1023  are grouped by a factor       23
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s010212_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 1
-> sis0c1p40_290296.fits already present in current directory
-> Generating ad87044010s010212_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S0C1 Bright2 PI RMF
Calibration data files:
  ecd = ./sis0c1p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad87044010s010212_1.arf with point=no
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   38 bins
               expanded to   38 by   38 bins
 First WMAP bin is at detector pixel  328  328
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   52.169     arcmin^2
 Optical axis is detector pixel 662.72 559.02
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 4.02000E+03
 Weighted mean angle from optical axis  =  5.440 arcmin
-> Standard Output From STOOL group_event_files:
1 ad87044010s100102m.evt 3943
1 ad87044010s100202h.evt 3943
-> Fetching SIS1_NOTCHIP0.1
-> Fetching SIS1_NOTCHIP1.1
-> Fetching SIS1_NOTCHIP2.1
-> Fetching SIS1_OFFCHIP.2
-> Extracting ad87044010s110102_1.pi from ad87044010s132002_1.reg and:
ad87044010s100102m.evt
ad87044010s100202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.95E+04     1574 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.95E+04     1574 0001
      2 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2369 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1574      1209            365         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2369      1815            554         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3943      3024            919         0         0         0
   in  24356.     seconds
 Spectrum         has     3024 counts for 0.1242     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24356.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.18160E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      16  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s110102_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s100102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad87044010s100202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT > set phaname PI
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad87044010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT > filter region ad87044010s110102.discrim
!xsel:ASCA-SIS1-BRIGHT > extract spectrum
!xsel:ASCA-SIS1-BRIGHT > save spectrum ad87044010s110102_1.pi group=yes
Wrote spectrum to ad87044010s110102_1.pi
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Deleting BLANK keyword from ad87044010s110102_1.pi
-> Grouping ad87044010s110102_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24356.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.18160E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 512             No. of legal detector channels
  NCHAN     - 512             No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      16  of undefined grouping (Channel quality=bad)
 ...        17 -      20  are grouped by a factor        4
 ...        21 -      26  are grouped by a factor        3
 ...        27 -      30  are grouped by a factor        2
 ...        31 -      31  are single channels
 ...        32 -      33  are grouped by a factor        2
 ...        34 -      51  are single channels
 ...        52 -      55  are grouped by a factor        2
 ...        56 -      56  are single channels
 ...        57 -      72  are grouped by a factor        2
 ...        73 -      75  are grouped by a factor        3
 ...        76 -      83  are grouped by a factor        4
 ...        84 -      86  are grouped by a factor        3
 ...        87 -      90  are grouped by a factor        4
 ...        91 -      95  are grouped by a factor        5
 ...        96 -      99  are grouped by a factor        4
 ...       100 -     109  are grouped by a factor        5
 ...       110 -     127  are grouped by a factor        6
 ...       128 -     136  are grouped by a factor        9
 ...       137 -     143  are grouped by a factor        7
 ...       144 -     163  are grouped by a factor       10
 ...       164 -     174  are grouped by a factor       11
 ...       175 -     187  are grouped by a factor       13
 ...       188 -     206  are grouped by a factor       19
 ...       207 -     240  are grouped by a factor       34
 ...       241 -     303  are grouped by a factor       63
 ...       304 -     469  are grouped by a factor      166
 ...       470 -     511  are grouped by a factor       42
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s110102_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 3
-> Fetching sis1c3p40_290296.fits
-> Generating ad87044010s110102_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x512 S1C3 Bright PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad87044010s110102_1.arf with point=no
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   34 bins
               expanded to   38 by   34 bins
 First WMAP bin is at detector pixel  328  360
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   48.185     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 3.00500E+03
 Weighted mean angle from optical axis  =  7.858 arcmin
-> Standard Output From STOOL group_event_files:
1 ad87044010s100112m.evt 4022
1 ad87044010s100212h.evt 4022
-> SIS1_NOTCHIP0.1 already present in current directory
-> SIS1_NOTCHIP1.1 already present in current directory
-> SIS1_NOTCHIP2.1 already present in current directory
-> SIS1_OFFCHIP.2 already present in current directory
-> Extracting ad87044010s110212_1.pi from ad87044010s132002_1.reg and:
ad87044010s100112m.evt
ad87044010s100212h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.95E+04     1609 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.95E+04     1609 0001
      2 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.15E+05     2413 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1609      1220            389         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2413      1833            580         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4022      3053            969         0         0         0
   in  24356.     seconds
 Spectrum         has     3053 counts for 0.1253     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24356.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.18160E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...  QUALITY
 ...
 ...  -------
 ...  QUALITY
 ...  -------
 ...  Bad Channels (Channel - Channel)
 ...  ---------------------------------------------
 ...         0 -      32  have quality 5
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s110212_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s100112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > read events ad87044010s100212h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set phaname PI
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87044010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP0.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP1.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_NOTCHIP2.1
!xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.2
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87044010s110212.discrim
!xsel:ASCA-SIS1-BRIGHT2 > extract spectrum
!xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad87044010s110212_1.pi group=yes
Wrote spectrum to ad87044010s110212_1.pi
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Deleting BLANK keyword from ad87044010s110212_1.pi
-> Grouping ad87044010s110212_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - SIS1            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 24356.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 4.18160E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      32  of undefined grouping (Channel quality=bad)
 ...        33 -      39  are grouped by a factor        7
 ...        40 -      45  are grouped by a factor        6
 ...        46 -      53  are grouped by a factor        4
 ...        54 -      62  are grouped by a factor        3
 ...        63 -     106  are grouped by a factor        2
 ...       107 -     109  are grouped by a factor        3
 ...       110 -     113  are grouped by a factor        2
 ...       114 -     119  are grouped by a factor        3
 ...       120 -     123  are grouped by a factor        4
 ...       124 -     129  are grouped by a factor        3
 ...       130 -     133  are grouped by a factor        4
 ...       134 -     136  are grouped by a factor        3
 ...       137 -     144  are grouped by a factor        4
 ...       145 -     150  are grouped by a factor        6
 ...       151 -     157  are grouped by a factor        7
 ...       158 -     162  are grouped by a factor        5
 ...       163 -     176  are grouped by a factor        7
 ...       177 -     184  are grouped by a factor        8
 ...       185 -     193  are grouped by a factor        9
 ...       194 -     200  are grouped by a factor        7
 ...       201 -     218  are grouped by a factor        9
 ...       219 -     229  are grouped by a factor       11
 ...       230 -     241  are grouped by a factor       12
 ...       242 -     254  are grouped by a factor       13
 ...       255 -     271  are grouped by a factor       17
 ...       272 -     284  are grouped by a factor       13
 ...       285 -     300  are grouped by a factor       16
 ...       301 -     319  are grouped by a factor       19
 ...       320 -     341  are grouped by a factor       22
 ...       342 -     367  are grouped by a factor       26
 ...       368 -     399  are grouped by a factor       32
 ...       400 -     451  are grouped by a factor       52
 ...       452 -     535  are grouped by a factor       84
 ...       536 -     769  are grouped by a factor      234
 ...       770 -     933  are grouped by a factor      164
 ...       934 -    1023  are grouped by a factor       90
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010s110212_1.pi
 ** grppha 2.9.0 completed successfully
-> Source occupies chip(s) 3
-> sis1c3p40_290296.fits already present in current directory
-> Generating ad87044010s110212_1.rmf
-> Standard Output From FTOOL sisrmg:
Sisrmg Version 1.1, Configured 04/97

  This version resolves *all* known keyword incompatibilities with
  other FTOOLS tasks.  If you have previously fudged *any* keywords
  in the PHA file to compensate, incorrect results will follow.
 
Setting 1st PHA channel to 0
Making v1.1 1180x1024 S1C3 Bright2 PI RMF
Calibration data files:
  ecd = ./sis1c3p40_290296.fits
  cti = ./sisph2pi_110397.fits
 echo = ./sisechos_290296.fits
  rdd = ./sisrddis_290296.fits
Please stand by...
...Done.
-> Generating ad87044010s110212_1.arf with point=no
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   38 by   34 bins
               expanded to   38 by   34 bins
 First WMAP bin is at detector pixel  328  360
   8 detector pixels per WMAP bin
 WMAP bin size is   0.21600 mm
                    0.21216 arcmin
 Selected region size is   48.185     arcmin^2
 Optical axis is detector pixel 618.28 773.83
 
 1180 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 3.03400E+03
 Weighted mean angle from optical axis  =  7.859 arcmin
-> Standard Output From STOOL group_event_files:
1 ad87044010g200170h.evt 11113
1 ad87044010g200270m.evt 11113
1 ad87044010g200370l.evt 11113
-> GIS2_REGION256.4 already present in current directory
-> Extracting ad87044010g210170_1.pi from ad87044010g225670_1.reg and:
ad87044010g200170h.evt
ad87044010g200270m.evt
ad87044010g200370l.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5215     1024
      2 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5215     1024
      2 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02        9     1024
      3 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5889      1653           4236         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5215      1371           3844         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
              9         1              8         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         11113      3025           8088         0         0         0
   in  30374.     seconds
 Spectrum         has     3025 counts for 9.9592E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 30374.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010g210170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > read events ad87044010g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > read events ad87044010g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > set phaname PI
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87044010g225670_1.reg
!xsel:ASCA-GIS2-PH > filter region GIS2_REGION256.4
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad87044010g210170_1.pi group=yes
Wrote spectrum to ad87044010g210170_1.pi
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Deleting BLANK keyword from ad87044010g210170_1.pi
-> Correcting ad87044010g210170_1.pi for dead time
-> Standard Output From FTOOL deadtime:
... read all the files from deadlist.tmp
-> Grouping ad87044010g210170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 29547.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      40  are grouped by a factor       41
 ...        41 -      54  are grouped by a factor       14
 ...        55 -      65  are grouped by a factor       11
 ...        66 -      73  are grouped by a factor        8
 ...        74 -      80  are grouped by a factor        7
 ...        81 -      85  are grouped by a factor        5
 ...        86 -      88  are grouped by a factor        3
 ...        89 -      92  are grouped by a factor        4
 ...        93 -      97  are grouped by a factor        5
 ...        98 -     101  are grouped by a factor        4
 ...       102 -     143  are grouped by a factor        3
 ...       144 -     147  are grouped by a factor        4
 ...       148 -     168  are grouped by a factor        3
 ...       169 -     173  are grouped by a factor        5
 ...       174 -     176  are grouped by a factor        3
 ...       177 -     180  are grouped by a factor        4
 ...       181 -     185  are grouped by a factor        5
 ...       186 -     189  are grouped by a factor        4
 ...       190 -     225  are grouped by a factor        6
 ...       226 -     241  are grouped by a factor        8
 ...       242 -     248  are grouped by a factor        7
 ...       249 -     266  are grouped by a factor        9
 ...       267 -     273  are grouped by a factor        7
 ...       274 -     291  are grouped by a factor        9
 ...       292 -     299  are grouped by a factor        8
 ...       300 -     312  are grouped by a factor       13
 ...       313 -     324  are grouped by a factor       12
 ...       325 -     337  are grouped by a factor       13
 ...       338 -     351  are grouped by a factor       14
 ...       352 -     367  are grouped by a factor       16
 ...       368 -     387  are grouped by a factor       20
 ...       388 -     404  are grouped by a factor       17
 ...       405 -     417  are grouped by a factor       13
 ...       418 -     434  are grouped by a factor       17
 ...       435 -     448  are grouped by a factor       14
 ...       449 -     478  are grouped by a factor       30
 ...       479 -     498  are grouped by a factor       20
 ...       499 -     535  are grouped by a factor       37
 ...       536 -     592  are grouped by a factor       57
 ...       593 -     664  are grouped by a factor       72
 ...       665 -     793  are grouped by a factor      129
 ...       794 -    1023  of undefined grouping (Channel quality=bad)
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010g210170_1.pi
 ** grppha 2.9.0 completed successfully
-> Fetching gis2v4_0.rmf
-> Fetching s2bev1.fits
-> Fetching s2gridv3.fits
-> Generating ad87044010g210170_1.arf with point=no
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   46   52
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 133.00 130.96
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 3.01100E+03
 Weighted mean angle from optical axis  =  7.152 arcmin
-> Standard Output From STOOL group_event_files:
1 ad87044010g300170h.evt 12203
1 ad87044010g300270m.evt 12203
1 ad87044010g300370l.evt 12203
-> GIS3_REGION256.4 already present in current directory
-> Extracting ad87044010g310170_1.pi from ad87044010g325670_1.reg and:
ad87044010g300170h.evt
ad87044010g300270m.evt
ad87044010g300370l.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5654     1024
      2 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5654     1024
      2 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02       18     1024
      3 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6531      1966           4565         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5654      1699           3955         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             18         3             15         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         12203      3668           8535         0         0         0
   in  30372.     seconds
 Spectrum         has     3668 counts for 0.1208     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 30372.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010g310170_1.pi
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > read events ad87044010g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > read events ad87044010g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > set phaname PI
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87044010g325670_1.reg
!xsel:ASCA-GIS3-PH > filter region GIS3_REGION256.4
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad87044010g310170_1.pi group=yes
Wrote spectrum to ad87044010g310170_1.pi
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Deleting BLANK keyword from ad87044010g310170_1.pi
-> Correcting ad87044010g310170_1.pi for dead time
-> Standard Output From FTOOL deadtime:
... read all the files from deadlist.tmp
-> Grouping ad87044010g310170_1.pi to 40 counts/bin
-> Standard Output From FTOOL grppha:
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 29589.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.90070E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - TRUE            Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -      35  are grouped by a factor       36
 ...        36 -      52  are grouped by a factor       17
 ...        53 -      61  are grouped by a factor        9
 ...        62 -      67  are grouped by a factor        6
 ...        68 -      77  are grouped by a factor        5
 ...        78 -      85  are grouped by a factor        4
 ...        86 -      87  are grouped by a factor        2
 ...        88 -      91  are grouped by a factor        4
 ...        92 -     109  are grouped by a factor        3
 ...       110 -     111  are grouped by a factor        2
 ...       112 -     114  are grouped by a factor        3
 ...       115 -     116  are grouped by a factor        2
 ...       117 -     125  are grouped by a factor        3
 ...       126 -     129  are grouped by a factor        2
 ...       130 -     132  are grouped by a factor        3
 ...       133 -     134  are grouped by a factor        2
 ...       135 -     143  are grouped by a factor        3
 ...       144 -     145  are grouped by a factor        2
 ...       146 -     151  are grouped by a factor        3
 ...       152 -     155  are grouped by a factor        4
 ...       156 -     173  are grouped by a factor        3
 ...       174 -     181  are grouped by a factor        4
 ...       182 -     184  are grouped by a factor        3
 ...       185 -     188  are grouped by a factor        4
 ...       189 -     198  are grouped by a factor        5
 ...       199 -     210  are grouped by a factor        6
 ...       211 -     215  are grouped by a factor        5
 ...       216 -     221  are grouped by a factor        6
 ...       222 -     228  are grouped by a factor        7
 ...       229 -     233  are grouped by a factor        5
 ...       234 -     241  are grouped by a factor        8
 ...       242 -     246  are grouped by a factor        5
 ...       247 -     254  are grouped by a factor        8
 ...       255 -     261  are grouped by a factor        7
 ...       262 -     267  are grouped by a factor        6
 ...       268 -     281  are grouped by a factor        7
 ...       282 -     289  are grouped by a factor        8
 ...       290 -     307  are grouped by a factor        9
 ...       308 -     317  are grouped by a factor       10
 ...       318 -     332  are grouped by a factor       15
 ...       333 -     341  are grouped by a factor        9
 ...       342 -     351  are grouped by a factor       10
 ...       352 -     362  are grouped by a factor       11
 ...       363 -     376  are grouped by a factor       14
 ...       377 -     385  are grouped by a factor        9
 ...       386 -     396  are grouped by a factor       11
 ...       397 -     411  are grouped by a factor       15
 ...       412 -     425  are grouped by a factor       14
 ...       426 -     440  are grouped by a factor       15
 ...       441 -     449  are grouped by a factor        9
 ...       450 -     471  are grouped by a factor       22
 ...       472 -     492  are grouped by a factor       21
 ...       493 -     514  are grouped by a factor       22
 ...       515 -     548  are grouped by a factor       34
 ...       549 -     601  are grouped by a factor       53
 ...       602 -     675  are grouped by a factor       74
 ...       676 -     761  are grouped by a factor       86
 ...       762 -    1023  are grouped by a factor      262
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010g310170_1.pi
 ** grppha 2.9.0 completed successfully
-> Fetching gis3v4_0.rmf
-> Fetching s3bev1.fits
-> Fetching s3gridv3.fits
-> Generating ad87044010g310170_1.arf with point=no
-> Standard Output From FTOOL ascaarf:
ASCAARF vers 3.00  6 Oct 1998.
 
 Input WMAP array has size   48 by   48 bins
               expanded to  128 by  128 bins
 First WMAP bin is at detector pixel   52   53
   1 detector pixels per WMAP bin
 WMAP bin size is   0.25000 mm
                    0.24555 arcmin
 Selected region size is   114.65     arcmin^2
 Optical axis is detector pixel 119.36 134.44
 
  201 energies from RMF file
 Effective area fudge applied
 Arf filter applied
 
 Total counts in region = 3.65400E+03
 Weighted mean angle from optical axis  =  4.997 arcmin
-> Plotting ad87044010g210170_1_pi.ps from ad87044010g210170_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 19:47:28 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87044010g210170_1.pi;
 Net count rate (cts/s) for file   1  0.1024    +/-  1.9220E-03
   using response (RMF) file...       gis2v4_0.rmf
   using auxiliary (ARF) file...      ad87044010g210170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad87044010g310170_1_pi.ps from ad87044010g310170_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 19:47:47 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87044010g310170_1.pi;
 Net count rate (cts/s) for file   1  0.1240    +/-  2.0468E-03
   using response (RMF) file...       gis3v4_0.rmf
   using auxiliary (ARF) file...      ad87044010g310170_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad87044010s010102_1_pi.ps from ad87044010s010102_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 19:48:08 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87044010s010102_1.pi;
 Net count rate (cts/s) for file   1  0.1565    +/-  2.4848E-03
   using response (RMF) file...       ad87044010s010102_1.rmf
   using auxiliary (ARF) file...      ad87044010s010102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad87044010s010212_1_pi.ps from ad87044010s010212_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 19:48:30 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87044010s010212_1.pi;
 Net count rate (cts/s) for file   1  0.1592    +/-  2.5108E-03
   using response (RMF) file...       ad87044010s010212_1.rmf
   using auxiliary (ARF) file...      ad87044010s010212_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad87044010s110102_1_pi.ps from ad87044010s110102_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 19:48:53 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87044010s110102_1.pi;
 Net count rate (cts/s) for file   1  0.1242    +/-  2.2630E-03
   using response (RMF) file...       ad87044010s110102_1.rmf
   using auxiliary (ARF) file...      ad87044010s110102_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Plotting ad87044010s110212_1_pi.ps from ad87044010s110212_1.pi
-> Standard Output From STOOL xspec:

               Xspec 11.00 19:49:13 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xcm" ...


!XSPEC>   data ad87044010s110212_1.pi;
 Net count rate (cts/s) for file   1  0.1253    +/-  2.2793E-03
   using response (RMF) file...       ad87044010s110212_1.rmf
   using auxiliary (ARF) file...      ad87044010s110212_1.arf
   1 data set is in use

!XSPEC>   setplot energy;

!XSPEC>   ignore bad;

!XSPEC>   setplot com log y on;

!XSPEC>   setplot com rescale y;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit

Extracting light curves (19:49:20)

-> TIMEDEL=4.0000000000E+00 for ad87044010s000102m.evt
-> TIMEDEL=4.0000000000E+00 for ad87044010s000202h.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad87044010s032002_1.reg
-> ... and files: ad87044010s000102m.evt ad87044010s000202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.11E+05     2075 0100
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.11E+05     2075 0100
      2 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2843 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2075      1680            395         0         0         0
 Writing events file
   1680 events written to the output file
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2843      2314            529         0         0         0
 Writing events file
   3994 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4918      3994            924         0         0         0
   in  25440.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s000102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT > read events ad87044010s000202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad87044010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting ad87044010s000002_1.lc with binsize 318.476027968113
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.25E+05     3994 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           3994      3994              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3994      3994              0         0         0         0
   in  25440.     seconds
 Fits light curve has     3994 counts for 0.1570     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT > set binsize 318.476027968113
!xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS0-BRIGHT > save curve ad87044010s000002_1.lc
Wrote FITS light curve to file ad87044010s000002_1.lc
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Plotting ad87044010s000002_1.lc in ad87044010s000002_1_lc.ps
-> Standard Output From FTOOL lcurve:
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87044010s000002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ABELL_S295_S1       Start Time (d) .... 11403 11:45:39.052
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11404 04:14:59.052
 No. of Rows .......           85        Bin Time (s) ......    318.5
 Right Ascension ... 4.1478E+01          Internal time sys.. Converted to TJD
 Declination ....... -5.2967E+01         Experiment ........ ASCA     SIS0
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11403.49003532260  (days)      11:45:39: 52  (h:m:s:ms)
 Expected Stop .... 11404.17707235963  (days)       4:14:59: 52  (h:m:s:ms)
 
 Minimum Newbin Time    318.47601      (s)
 for Maximum Newbin No..              187
 
 Default Newbin Time is:   318.47601    (s) (to have 1 Intv. of     187 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     318.47601      (s)
 Maximum Newbin No.               187
 
 Default Newbins per Interval are:       187
 (giving       1 Interval of       187 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       187 Newbins of       318.476     (s)
 
     187 analysis results per interval
 
  1% completed
  2% completed
  3% completed
  4% completed
  5% completed
  7% completed
  8% completed
  9% completed
 10% completed
 11% completed
 12% completed
 14% completed
 15% completed
 16% completed
 17% completed
 18% completed
 20% completed
 21% completed
 22% completed
 23% completed
 24% completed
 25% completed
 27% completed
 28% completed
 29% completed
 30% completed
 31% completed
 32% completed
 34% completed
 35% completed
 36% completed
 37% completed
 38% completed
 40% completed
 41% completed
 42% completed
 43% completed
 44% completed
 45% completed
 47% completed
 48% completed
 49% completed
 50% completed
 51% completed
 52% completed
 54% completed
 55% completed
 56% completed
 57% completed
 58% completed
 60% completed
 61% completed
 62% completed
 63% completed
 64% completed
 65% completed
 67% completed
 68% completed
 69% completed
 70% completed
 71% completed
 72% completed
 74% completed
 75% completed
 76% completed
 77% completed
 78% completed
 80% completed
 81% completed
 82% completed
 83% completed
 84% completed
 85% completed
 87% completed
 88% completed
 89% completed
 90% completed
 91% completed
 92% completed
 94% completed
 95% completed
 96% completed
 97% completed
 98% completed
100% completed
 
 Intv    1   Start 11403 11:48:18
     Ser.1     Avg 0.1565        Chisq  71.49       Var 0.5612E-03 Newbs.     85
               Min 0.8203E-01      Max 0.2250    expVar 0.5665E-03  Bins     85
PLT> @lightcurve.pco
!PLT> dev ad87044010s000002_1_lc.ps/ps
!PLT> LA File ad87044010s000002_1.lc
!PLT> plot
!PLT> quit
-> TIMEDEL=4.0000000000E+00 for ad87044010s100102m.evt
-> TIMEDEL=4.0000000000E+00 for ad87044010s100202h.evt
-> Minimum bin size is 4.0000000000E+00 seconds
-> Extracting events from region ad87044010s132002_1.reg
-> ... and files: ad87044010s100102m.evt ad87044010s100202h.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.95E+04     1574 0001
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.95E+04     1574 0001
      2 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2369 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1574      1216            358         0         0         0
 Writing events file
   1216 events written to the output file
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2369      1824            545         0         0         0
 Writing events file
   3040 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3943      3040            903         0         0         0
   in  24356.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s100102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT > read events ad87044010s100202h.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad87044010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting ad87044010s100002_1.lc with binsize 400.593548749917
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.24E+05     3040 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           3040      3040              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3040      3040              0         0         0         0
   in  24356.     seconds
 Fits light curve has     3040 counts for 0.1248     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT > set binsize 400.593548749917
!xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5
!xsel:ASCA-SIS1-BRIGHT > save curve ad87044010s100002_1.lc
Wrote FITS light curve to file ad87044010s100002_1.lc
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Plotting ad87044010s100002_1.lc in ad87044010s100002_1_lc.ps
-> Standard Output From FTOOL lcurve:
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87044010s100002_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ABELL_S295_S1       Start Time (d) .... 11403 11:45:39.052
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11404 04:14:59.052
 No. of Rows .......           64        Bin Time (s) ......    400.6
 Right Ascension ... 4.1478E+01          Internal time sys.. Converted to TJD
 Declination ....... -5.2967E+01         Experiment ........ ASCA     SIS1
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11403.49003532260  (days)      11:45:39: 52  (h:m:s:ms)
 Expected Stop .... 11404.17707235963  (days)       4:14:59: 52  (h:m:s:ms)
 
 Minimum Newbin Time    400.59354      (s)
 for Maximum Newbin No..              149
 
 Default Newbin Time is:   400.59354    (s) (to have 1 Intv. of     149 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     400.59354      (s)
 Maximum Newbin No.               149
 
 Default Newbins per Interval are:       149
 (giving       1 Interval of       149 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       149 Newbins of       400.594     (s)
 
     149 analysis results per interval
 
  1% completed
  3% completed
  4% completed
  6% completed
  7% completed
  9% completed
 10% completed
 12% completed
 14% completed
 15% completed
 17% completed
 18% completed
 20% completed
 21% completed
 23% completed
 25% completed
 26% completed
 28% completed
 29% completed
 31% completed
 32% completed
 34% completed
 35% completed
 37% completed
 39% completed
 40% completed
 42% completed
 43% completed
 45% completed
 46% completed
 48% completed
 50% completed
 51% completed
 53% completed
 54% completed
 56% completed
 57% completed
 59% completed
 60% completed
 62% completed
 64% completed
 65% completed
 67% completed
 68% completed
 70% completed
 71% completed
 73% completed
 75% completed
 76% completed
 78% completed
 79% completed
 81% completed
 82% completed
 84% completed
 85% completed
 87% completed
 89% completed
 90% completed
 92% completed
 93% completed
 95% completed
 96% completed
 98% completed
100% completed
 
 Intv    1   Start 11403 11:48:59
     Ser.1     Avg 0.1255        Chisq  73.13       Var 0.4422E-03 Newbs.     64
               Min 0.7790E-01      Max 0.1871    expVar 0.3625E-03  Bins     64
PLT> @lightcurve.pco
!PLT> dev ad87044010s100002_1_lc.ps/ps
!PLT> LA File ad87044010s100002_1.lc
!PLT> plot
!PLT> quit
-> TIMEDEL=6.2500000000E-02 for ad87044010g200170h.evt
-> TIMEDEL=5.0000000000E-01 for ad87044010g200270m.evt
-> TIMEDEL=2.0000000000E+00 for ad87044010g200370l.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad87044010g225670_1.reg
-> ... and files: ad87044010g200170h.evt ad87044010g200270m.evt ad87044010g200370l.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5215     1024
      2 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5215     1024
      2 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02        9     1024
      3 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5889      1653           4236         0         0         0
 Writing events file
   1653 events written to the output file
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5215      1371           3844         0         0         0
 Writing events file
   3024 events written to the output file
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
              9         1              8         0         0         0
 Writing events file
   3025 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         11113      3025           8088         0         0         0
   in  30374.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > read events ad87044010g200270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > read events ad87044010g200370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87044010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad87044010g200070_1.lc with binsize 502.046931055459
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  11:07:15    0.30E+05     3025     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           3025      3025              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3025      3025              0         0         0         0
   in  30374.     seconds
 Fits light curve has     3025 counts for 9.9592E-02 counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > set binsize 502.046931055459
!xsel:ASCA-GIS2-PH > extract curve exposure=0.5
!xsel:ASCA-GIS2-PH > save curve ad87044010g200070_1.lc
Wrote FITS light curve to file ad87044010g200070_1.lc
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Plotting ad87044010g200070_1.lc in ad87044010g200070_1_lc.ps
-> Standard Output From FTOOL lcurve:
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87044010g200070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ABELL_S295_S1       Start Time (d) .... 11403 11:42:59.052
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11404 04:38:27.052
 No. of Rows .......           60        Bin Time (s) ......    502.0
 Right Ascension ... 4.1478E+01          Internal time sys.. Converted to TJD
 Declination ....... -5.2967E+01         Experiment ........ ASCA     GIS2
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11403.48818347074  (days)      11:42:59: 52  (h:m:s:ms)
 Expected Stop .... 11404.19336865593  (days)       4:38:27: 52  (h:m:s:ms)
 
 Minimum Newbin Time    502.04694      (s)
 for Maximum Newbin No..              122
 
 Default Newbin Time is:   502.04694    (s) (to have 1 Intv. of     122 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     502.04694      (s)
 Maximum Newbin No.               122
 
 Default Newbins per Interval are:       122
 (giving       1 Interval of       122 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       122 Newbins of       502.047     (s)
 
     122 analysis results per interval
 
  1% completed
  3% completed
  5% completed
  6% completed
  8% completed
 10% completed
 11% completed
 13% completed
 15% completed
 16% completed
 18% completed
 20% completed
 21% completed
 23% completed
 25% completed
 26% completed
 28% completed
 30% completed
 31% completed
 33% completed
 35% completed
 36% completed
 38% completed
 40% completed
 41% completed
 43% completed
 45% completed
 46% completed
 48% completed
 50% completed
 51% completed
 53% completed
 55% completed
 56% completed
 58% completed
 60% completed
 61% completed
 63% completed
 65% completed
 66% completed
 68% completed
 70% completed
 71% completed
 73% completed
 75% completed
 76% completed
 78% completed
 80% completed
 81% completed
 83% completed
 85% completed
 86% completed
 88% completed
 90% completed
 91% completed
 93% completed
 95% completed
 96% completed
 98% completed
100% completed
 
 Intv    1   Start 11403 11:47:10
     Ser.1     Avg 0.9945E-01    Chisq  45.76       Var 0.1823E-03 Newbs.     60
               Min 0.7001E-01      Max 0.1394    expVar 0.2172E-03  Bins     60
PLT> @lightcurve.pco
!PLT> dev ad87044010g200070_1_lc.ps/ps
!PLT> LA File ad87044010g200070_1.lc
!PLT> plot
!PLT> quit
-> TIMEDEL=6.2500000000E-02 for ad87044010g300170h.evt
-> TIMEDEL=5.0000000000E-01 for ad87044010g300270m.evt
-> TIMEDEL=2.0000000000E+00 for ad87044010g300370l.evt
-> Minimum bin size is 2.0000000000E+00 seconds
-> Extracting events from region ad87044010g325670_1.reg
-> ... and files: ad87044010g300170h.evt ad87044010g300270m.evt ad87044010g300370l.evt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5654     1024
      2 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5654     1024
      2 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02       18     1024
      3 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6531      1966           4565         0         0         0
 Writing events file
   1966 events written to the output file
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5654      1699           3955         0         0         0
 Writing events file
   3665 events written to the output file
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             18         3             15         0         0         0
 Writing events file
   3668 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         12203      3668           8535         0         0         0
   in  30372.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > read events ad87044010g300270m.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > read events ad87044010g300370l.evt
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87044010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes
Wrote events list to file events.tmp
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad87044010g300070_1.lc with binsize 414.010896058418
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  11:07:15    0.30E+05     3668     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/events.tmp
          Total      Good    Bad: Region      Time     Phase       Cut
           3668      3668              0         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          3668      3668              0         0         0         0
   in  30372.     seconds
 Fits light curve has     3668 counts for 0.1208     counts/sec
 Thresholding removed more than half the bins
 Try exposure=0.0 on the extract command in xselect
 or lcthresh=0.0 if running extractor stand-alone
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events events.tmp
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > set binsize 414.010896058418
!xsel:ASCA-GIS3-PH > extract curve exposure=0.5
!xsel:ASCA-GIS3-PH > save curve ad87044010g300070_1.lc
Wrote FITS light curve to file ad87044010g300070_1.lc
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Plotting ad87044010g300070_1.lc in ad87044010g300070_1_lc.ps
-> Standard Output From FTOOL lcurve:
 
lcurve 1.0 (xronos5.16)
 
 Series 1 file   1:ad87044010g300070_1.lc
 
 Selected FITS extensions: 1 - RATE TABLE;
 
 Source ............ ABELL_S295_S1       Start Time (d) .... 11403 11:42:59.052
 FITS Extension ....  1 - `RATE      `   Stop Time (d) ..... 11404 04:38:27.052
 No. of Rows .......           73        Bin Time (s) ......    414.0
 Right Ascension ... 4.1478E+01          Internal time sys.. Converted to TJD
 Declination ....... -5.2967E+01         Experiment ........ ASCA     GIS3
 Filter ............ NONE
 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No
 
 Selected Columns:  1- Time;  2- Y-axis;  3- Y-error;  4- Fractional exposure;
 
 File contains binned data.
 
 
 Expected Start ... 11403.48818347074  (days)      11:42:59: 52  (h:m:s:ms)
 Expected Stop .... 11404.19336865593  (days)       4:38:27: 52  (h:m:s:ms)
 
 Minimum Newbin Time    414.01089      (s)
 for Maximum Newbin No..              148
 
 Default Newbin Time is:   414.01089    (s) (to have 1 Intv. of     148 Newbins)
 Type INDEF to accept the default value
 
 
 Newbin Time ......     414.01089      (s)
 Maximum Newbin No.               148
 
 Default Newbins per Interval are:       148
 (giving       1 Interval of       148 Newbins)
 Type INDEF to accept the default value
 
 Maximum of       1 Intvs. with       148 Newbins of       414.011     (s)
 
     148 analysis results per interval
 
  1% completed
  2% completed
  4% completed
  5% completed
  6% completed
  8% completed
  9% completed
 10% completed
 12% completed
 13% completed
 15% completed
 16% completed
 17% completed
 19% completed
 20% completed
 21% completed
 23% completed
 24% completed
 26% completed
 27% completed
 28% completed
 30% completed
 31% completed
 32% completed
 34% completed
 35% completed
 36% completed
 38% completed
 39% completed
 41% completed
 42% completed
 43% completed
 45% completed
 46% completed
 47% completed
 49% completed
 50% completed
 52% completed
 53% completed
 54% completed
 56% completed
 57% completed
 58% completed
 60% completed
 61% completed
 63% completed
 64% completed
 65% completed
 67% completed
 68% completed
 69% completed
 71% completed
 72% completed
 73% completed
 75% completed
 76% completed
 78% completed
 79% completed
 80% completed
 82% completed
 83% completed
 84% completed
 86% completed
 87% completed
 89% completed
 90% completed
 91% completed
 93% completed
 94% completed
 95% completed
 97% completed
 98% completed
100% completed
 
 Intv    1   Start 11403 11:46:26
     Ser.1     Avg 0.1200        Chisq  84.48       Var 0.3709E-03 Newbs.     73
               Min 0.8212E-01      Max 0.1642    expVar 0.3156E-03  Bins     73
PLT> @lightcurve.pco
!PLT> dev ad87044010g300070_1_lc.ps/ps
!PLT> LA File ad87044010g300070_1.lc
!PLT> plot
!PLT> quit
-> Merging GTIs from the following files:
ad87044010g200170h.evt[2]
ad87044010g200270m.evt[2]
ad87044010g200370l.evt[2]
-> Making L1 light curve of ft990813_1052_0445G2HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  30917 output records from   30942  good input G2_L1    records.
-> Making L1 light curve of ft990813_1052_0445G2HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  26767 output records from   43463  good input G2_L1    records.
-> Merging GTIs from the following files:
ad87044010g300170h.evt[2]
ad87044010g300270m.evt[2]
ad87044010g300370l.evt[2]
-> Making L1 light curve of ft990813_1052_0445G3HK.fits with irate=HIGH
-> Standard Output From FTOOL ghkcurve:
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  29022 output records from   29047  good input G3_L1    records.
-> Making L1 light curve of ft990813_1052_0445G3HK.fits with irate=HI+MED
-> Standard Output From FTOOL ghkcurve:
ghkcurve: ALLGTI found in input HK file, will be applied to data.
ghkcurve:  26410 output records from   41418  good input G3_L1    records.

Extracting source event files (19:57:37)

-> Extracting unbinned light curve ad87044010g200170.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     5889     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5889      1653           4236         0         0         0
 Writing events file
   1653 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5889      1653           4236         0         0         0
   in  16230.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g200170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87044010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad87044010g200170.ulc use_events=yes
Wrote events list to file ad87044010g200170.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad87044010g200270.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5215     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5215      1371           3844         0         0         0
 Writing events file
   1371 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5215      1371           3844         0         0         0
   in  14112.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g200270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87044010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad87044010g200270.ulc use_events=yes
Wrote events list to file ad87044010g200270.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Extracting unbinned light curve ad87044010g200370.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02        9     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
              9         1              8         0         0         0
 Writing events file
      1 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             9         1              8         0         0         0
   in  31.836     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g200370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region ad87044010g225670_1.reg
!xsel:ASCA-GIS2-PH > extract events
!xsel:ASCA-GIS2-PH > save events outfile=ad87044010g200370.ulc use_events=yes
Wrote events list to file ad87044010g200370.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad87044010g200370.ulc since it has 1 events
-> Extracting unbinned light curve ad87044010g300170.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.16E+05     6531     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           6531      1966           4565         0         0         0
 Writing events file
   1966 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          6531      1966           4565         0         0         0
   in  16228.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g300170h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87044010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad87044010g300170.ulc use_events=yes
Wrote events list to file ad87044010g300170.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad87044010g300270.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.14E+05     5654     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           5654      1699           3955         0         0         0
 Writing events file
   1699 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          5654      1699           3955         0         0         0
   in  14112.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g300270m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87044010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad87044010g300270.ulc use_events=yes
Wrote events list to file ad87044010g300270.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Extracting unbinned light curve ad87044010g300370.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.32E+02       18     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.evt
          Total      Good    Bad: Region      Time     Phase       Cut
             18         3             15         0         0         0
 Writing events file
      3 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
            18         3             15         0         0         0
   in  31.836     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g300370l.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region ad87044010g325670_1.reg
!xsel:ASCA-GIS3-PH > extract events
!xsel:ASCA-GIS3-PH > save events outfile=ad87044010g300370.ulc use_events=yes
Wrote events list to file ad87044010g300370.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad87044010g300370.ulc since it has 3 events
-> Extracting unbinned light curve ad87044010s000102.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.11E+05     2075 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2075      1680            395         0         0         0
 Writing events file
   1680 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2075      1680            395         0         0         0
   in  10545.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s000102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad87044010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad87044010s000102.ulc use_events=yes
Wrote events list to file ad87044010s000102.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad87044010s000112.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.11E+05     2134 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2134      1709            425         0         0         0
 Writing events file
   1709 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2134      1709            425         0         0         0
   in  10545.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s000112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87044010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad87044010s000112.ulc use_events=yes
Wrote events list to file ad87044010s000112.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad87044010s000202.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2843 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2843      2314            529         0         0         0
 Writing events file
   2314 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2843      2314            529         0         0         0
   in  14895.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s000202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT > set image det
!xsel:ASCA-SIS0-BRIGHT > filter region ad87044010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT > extract events
!xsel:ASCA-SIS0-BRIGHT > save events outfile=ad87044010s000202.ulc use_events=yes
Wrote events list to file ad87044010s000202.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad87044010s000212.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.15E+05     2917 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2917      2354            563         0         0         0
 Writing events file
   2354 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2917      2354            563         0         0         0
   in  14895.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s000212h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS0-BRIGHT2 > set image det
!xsel:ASCA-SIS0-BRIGHT2 > filter region ad87044010s032002_1.reg
!xsel:ASCA-SIS0-BRIGHT2 > extract events
!xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad87044010s000212.ulc use_events=yes
Wrote events list to file ad87044010s000212.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad87044010s100102.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.95E+04     1574 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1574      1216            358         0         0         0
 Writing events file
   1216 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1574      1216            358         0         0         0
   in  9488.5     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s100102m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad87044010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad87044010s100102.ulc use_events=yes
Wrote events list to file ad87044010s100102.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad87044010s100112.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.95E+04     1609 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100112m.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           1609      1226            383         0         0         0
 Writing events file
   1226 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          1609      1226            383         0         0         0
   in  9488.5     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s100112m.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87044010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad87044010s100112.ulc use_events=yes
Wrote events list to file ad87044010s100112.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Extracting unbinned light curve ad87044010s100202.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.15E+05     2369 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2369      1824            545         0         0         0
 Writing events file
   1824 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2369      1824            545         0         0         0
   in  14868.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s100202h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT > set image det
!xsel:ASCA-SIS1-BRIGHT > filter region ad87044010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT > extract events
!xsel:ASCA-SIS1-BRIGHT > save events outfile=ad87044010s100202.ulc use_events=yes
Wrote events list to file ad87044010s100202.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT > exit save_session=no
-> Extracting unbinned light curve ad87044010s100212.ulc
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.15E+05     2413 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100212h.evt
          Total      Good    Bad: Region      Time     Phase       Cut
           2413      1841            572         0         0         0
 Writing events file
   1841 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          2413      1841            572         0         0         0
   in  14868.     seconds
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010s100212h.evt
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-SIS1-BRIGHT2 > set image det
!xsel:ASCA-SIS1-BRIGHT2 > filter region ad87044010s132002_1.reg
!xsel:ASCA-SIS1-BRIGHT2 > extract events
!xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad87044010s100212.ulc use_events=yes
Wrote events list to file ad87044010s100212.ulc
Changing Data directory from:
    /data/data23/seq_proc/ad0_87044010.003/
to the current working directory.
!xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no

Extracting FRAME mode data (20:4:0)

-> Extracting FRAME mode data from ft990813_1052.0445
-> stdout output from tlmFrm
 *** tlmFrm Version 1.1 (1997-08-25) *** 
total number of superframes: 13058
frame data: 208719870.976458 ---> 208720014.976026 
     S0, C0, 4 ccd mode;  Output File = fr990813_1052.0445_s0c0m4a.fits
frame data: 208720034.975966 ---> 208720178.975534 
     S0, C1, 4 ccd mode;  Output File = fr990813_1052.0445_s0c1m4a.fits
frame data: 208720198.975474 ---> 208720342.975042 
     S0, C2, 4 ccd mode;  Output File = fr990813_1052.0445_s0c2m4a.fits
frame data: 208720362.974982 ---> 208720506.97455 
     S0, C3, 4 ccd mode;  Output File = fr990813_1052.0445_s0c3m4a.fits
frame data: 208725634.959221 ---> 208725778.958792 
     S1, C2, 4 ccd mode;  Output File = fr990813_1052.0445_s1c2m4a.fits
frame data: 208725798.958732 ---> 208725942.958303 
     S1, C3, 4 ccd mode;  Output File = fr990813_1052.0445_s1c3m4a.fits
frame data: 208725962.958244 ---> 208726106.957815 
     S1, C0, 4 ccd mode;  Output File = fr990813_1052.0445_s1c0m4a.fits
frame data: 208726126.957756 ---> 208726270.957327 
     S1, C1, 4 ccd mode;  Output File = fr990813_1052.0445_s1c1m4a.fits
frame data: 208753726.875158 ---> 208753870.874728 
     S0, C0, 4 ccd mode;  Output File = fr990813_1052.0445_s0c0m4b.fits
frame data: 208753890.874668 ---> 208754034.874238 
     S0, C1, 4 ccd mode;  Output File = fr990813_1052.0445_s0c1m4b.fits
frame data: 208754054.874179 ---> 208754198.87375 
     S0, C2, 4 ccd mode;  Output File = fr990813_1052.0445_s0c2m4b.fits
frame data: 208754218.87369 ---> 208754362.873262 
     S0, C3, 4 ccd mode;  Output File = fr990813_1052.0445_s0c3m4b.fits

Total of 12 sets of frame data are extracted.
-> Processing frame fr990813_1052.0445_s0c0m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c0m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 338
-> Adding keywords to fr990813_1052.0445_s0c0m4a.fits
-> Processing frame fr990813_1052.0445_s0c0m4b.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c0m4b.fits
Output zero level image : leveled_frame.tmp
Bias level = 324
-> Adding keywords to fr990813_1052.0445_s0c0m4b.fits
-> Processing frame fr990813_1052.0445_s0c1m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c1m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 300
-> Adding keywords to fr990813_1052.0445_s0c1m4a.fits
-> Processing frame fr990813_1052.0445_s0c1m4b.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c1m4b.fits
Output zero level image : leveled_frame.tmp
Bias level = 287
-> Adding keywords to fr990813_1052.0445_s0c1m4b.fits
-> Processing frame fr990813_1052.0445_s0c2m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c2m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 334
-> Adding keywords to fr990813_1052.0445_s0c2m4a.fits
-> Processing frame fr990813_1052.0445_s0c2m4b.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c2m4b.fits
Output zero level image : leveled_frame.tmp
Bias level = 316
-> Adding keywords to fr990813_1052.0445_s0c2m4b.fits
-> Processing frame fr990813_1052.0445_s0c3m4a.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c3m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 313
-> Adding keywords to fr990813_1052.0445_s0c3m4a.fits
-> Processing frame fr990813_1052.0445_s0c3m4b.fits with bias adjustment 54 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 54
Input frame data        : fr990813_1052.0445_s0c3m4b.fits
Output zero level image : leveled_frame.tmp
Bias level = 297
-> Adding keywords to fr990813_1052.0445_s0c3m4b.fits
-> Processing frame fr990813_1052.0445_s1c0m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990813_1052.0445_s1c0m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 228
-> Adding keywords to fr990813_1052.0445_s1c0m4a.fits
-> Processing frame fr990813_1052.0445_s1c1m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990813_1052.0445_s1c1m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 194
-> Adding keywords to fr990813_1052.0445_s1c1m4a.fits
-> Processing frame fr990813_1052.0445_s1c2m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990813_1052.0445_s1c2m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 3104
-> Adding keywords to fr990813_1052.0445_s1c2m4a.fits
-> Processing frame fr990813_1052.0445_s1c3m4a.fits with bias adjustment 64 ADU
-> stdout output from mkPixLvl
Dark upper (ADU)        : 40
Dark lower (ADU)        : -40
Bias offset (ADU)       : 64
Input frame data        : fr990813_1052.0445_s1c3m4a.fits
Output zero level image : leveled_frame.tmp
Bias level = 221
-> Adding keywords to fr990813_1052.0445_s1c3m4a.fits
-> Extracting corner pixel histograms
-> Extracting corner pixels from ad87044010s000101m.unf
-> Calculating corner pixel GTI from ft990813_1052_0445.mkf
-> Extracting corner pixels from ad87044010s000201h.unf
-> Extracting corner pixels from ad87044010s000301h.unf
-> Extracting corner pixels from ad87044010s000401l.unf
-> Extracting corner pixels from ad87044010s100101m.unf
-> Extracting corner pixels from ad87044010s100201h.unf
-> Extracting corner pixels from ad87044010s100301h.unf
-> Extracting corner pixels from ad87044010s100401l.unf

Extracting GIS calibration source spectra (20:8:40)

-> Standard Output From STOOL group_event_files:
1 ad87044010g200170h.unf 38994
1 ad87044010g200270m.unf 38994
1 ad87044010g200370l.unf 38994
-> Fetching GIS2_CALSRC256.2
-> Extracting ad87044010g220170.cal from ad87044010g200170h.unf ad87044010g200270m.unf ad87044010g200370l.unf
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    17981     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    16654     1024
      2 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    17981     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    16654     1024
      2 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4359     1024
      3 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    17981     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17981      2317          15664         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16654      1938          14716         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4359       850           3509         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38994      5105          33889         0         0         0
   in  48408.     seconds
 Spectrum         has     5105 counts for 0.1055     counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS2            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 48408.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 3.57970E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010g220170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > read events ad87044010g200270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > read events ad87044010g200370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS2-PH > set image det
!xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2
!xsel:ASCA-GIS2-PH > extract spectrum
!xsel:ASCA-GIS2-PH > save spectrum ad87044010g220170.cal group=yes
Wrote spectrum to ad87044010g220170.cal
!xsel:ASCA-GIS2-PH > exit save_session=no
-> Deleting BLANK keyword from ad87044010g220170.cal
-> gis2v4_0.rmf already present in current directory
-> Plotting ad87044010g220170_cal.ps and finding peak
-> Standard Output From STOOL xspec:

               Xspec 11.00 20:09:43 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad87044010g220170.cal;
 Net count rate (cts/s) for file   1  0.1055    +/-  1.4769E-03
   using response (RMF) file...       gis2v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     5.8299880E+07 using    84 PHA bins.
 Reduced chi-squared =      767103.7     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     5.8299880E+07 using    84 PHA bins.
 Reduced chi-squared =      757141.3     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     5.8299880E+07 using    84 PHA bins.
 Reduced chi-squared =      747434.4     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      2215.349     using    84 PHA bins.
 Reduced chi-squared =      28.04239     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   595.812     -4         0.      3.5867E-03   6.099          0.
              4.5656E-02  9.0591E-03
   297.637     -5         0.      1.8180E-03   6.043          0.
              5.0573E-02  9.7682E-03
   260.541     -6         0.      2.4621E-03   6.021          0.
              5.2645E-02  1.0533E-02
   220.226     -7         0.      2.2629E-03   5.989          0.
              5.0914E-02  1.2244E-02
 Maximum number of increasing lambda iterations exceeded
 without decreasing the fit statistic, probable minimum
 found to available numerical accuracy
   109.992     -1         0.      2.2734E-03   5.952      0.1628
              5.1576E-02  1.2247E-02
   72.8155     -2         0.      1.6467E-03   5.989      0.1642
              5.6476E-02  1.0700E-02
   71.1648     -3         0.      2.1111E-03   5.988      0.1568
              5.6605E-02  1.0530E-02
   70.0837     -4         0.      1.7873E-03   5.988      0.1573
              5.6651E-02  1.0493E-02
 Number of trials exceeded - last iteration delta =    1.081
   69.6678     -5         0.      2.0048E-03   5.988      0.1573
              5.6653E-02  1.0489E-02
   69.4472     -6         0.      1.8560E-03   5.988      0.1573
              5.6654E-02  1.0489E-02
   69.3543     -7         0.      1.9563E-03   5.988      0.1573
              5.6654E-02  1.0489E-02
   69.3089     -8         0.      1.8880E-03   5.988      0.1573
              5.6654E-02  1.0489E-02
   69.2889     -9         0.      1.9342E-03   5.988      0.1573
              5.6654E-02  1.0489E-02
   69.2794    -10         0.      1.9028E-03   5.988      0.1573
              5.6654E-02  1.0489E-02
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 5.59E-08 | -0.99  0.00 -0.01 -0.04 -0.11
 3.99E-07 |  0.11 -0.05 -0.01 -0.08 -0.99
 1.34E-06 | -0.03 -0.04 -0.05  0.99 -0.08
 4.09E-05 |  0.01  0.88 -0.47  0.01 -0.04
 1.31E-04 | -0.01  0.47  0.88  0.06 -0.04
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               1.9028E-03 +/-  0.2588E-03
    3    3    2   gaussian/b LineE    keV        5.988     +/-  0.7780E-02
    4    4    2   gaussian/b Sigma    keV       0.1573     +/-  0.1051E-01
    5    5    2   gaussian/b norm               5.6654E-02 +/-  0.1348E-02
    6    3    3   gaussian/b LineE    keV        6.593     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1650     = par   4 *   1.049
    8    6    3   gaussian/b norm               1.0489E-02 +/-  0.8174E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      69.27938     using    84 PHA bins.
 Reduced chi-squared =     0.8769542     for     79 degrees of freedom
 Null hypothesis probability = 0.775

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS2 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Calibration source ad87044010g220170.cal peaks at 5.988 +/- 0.00778 keV
-> Standard Output From STOOL group_event_files:
1 ad87044010g300170h.unf 36978
1 ad87044010g300270m.unf 36978
1 ad87044010g300370l.unf 36978
-> Fetching GIS3_CALSRC256.2
-> Extracting ad87044010g320170.cal from ad87044010g300170h.unf ad87044010g300270m.unf ad87044010g300370l.unf
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] xsel
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    16959     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    15941     1024
      2 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    16959     1024
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    15941     1024
      2 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4078     1024
      3 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    16959     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16959      1896          15063         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          15941      1674          14267         0         0         0
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4078       704           3374         0         0         0
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         36978      4274          32704         0         0         0
   in  48406.     seconds
 Spectrum         has     4274 counts for 8.8295E-02 counts/sec
 ... written the PHA data Extension
 
  -------------------------
  MANDATORY KEYWORDS/VALUES
  -------------------------
  --------------------------------------------------------------------
  --------------------------------------------------------------------
  EXTNAME   - SPECTRUM        Name of this BINTABLE
  TELESCOP  - ASCA            Mission/Satellite name
  INSTRUME  - GIS3            Instrument/Detector
  FILTER    - NONE            Instrument filter in use
  EXPOSURE  - 48406.          Integration time (in secs) of PHA data
  AREASCAL  - 1.0000          Area scaling factor
  BACKSCAL  - 2.83360E-02     Background scaling factor
  BACKFILE  - none            Associated background file
  CORRSCAL  - 1.0000          Correlation scaling factor
  CORRFILE  - none            Associated correlation file
  RESPFILE  - none            Associated redistribution matrix file
  ANCRFILE  - none            Associated ancillary response file
  POISSERR  - TRUE            Whether Poissonian errors apply
  CHANTYPE  - PI              Whether channels have been corrected
  TLMIN1    - 0               First legal Detector channel
  DETCHANS  - 1024            No. of legal detector channels
  NCHAN     - 1024            No. of detector channels in dataset
  PHAVERSN  - 1.1.0           OGIP FITS version number
  STAT_ERR  - FALSE           Statistical Error
  SYS_ERR   - TRUE            Fractional Systematic Error
  QUALITY   - TRUE            Quality Flag
  GROUPING  - FALSE           Grouping Flag
  --------------------------------------------------------------------
  --------------------------------------------------------------------
 minchan(nocom)  0
 maxchan(nocom)  1023
 numchan(nocom)  4
 ...
 ...  --------
 ...  GROUPING
 ...  --------
 ...  ---------------------------------------------
 ...  Channel Grouping (Channel-Channel) :
 ...         0 -    1023  are grouped by a factor        4
 ...  ---------------------------------------------
 ...
 ...... exiting, changes written to file : ad87044010g320170.cal
 Command not found; type ? for a command listing
!xsel:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!xsel:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA > read events ad87044010g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > read events ad87044010g300270m.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   2
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > read events ad87044010g300370l.unf
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   3
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!xsel:ASCA-GIS3-PH > set image det
!xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2
!xsel:ASCA-GIS3-PH > extract spectrum
!xsel:ASCA-GIS3-PH > save spectrum ad87044010g320170.cal group=yes
Wrote spectrum to ad87044010g320170.cal
!xsel:ASCA-GIS3-PH > exit save_session=no
-> Deleting BLANK keyword from ad87044010g320170.cal
-> gis3v4_0.rmf already present in current directory
-> Plotting ad87044010g320170_cal.ps and finding peak
-> Standard Output From STOOL xspec:

               Xspec 11.00 20:10:53 17-Jul-2000
http://xspec.gsfc.nasa.gov/

 Plot device not set, use "cpd" to set it

 Type "help" or "?" for further information

Executing script file "z.xco" ...


!XSPEC>   query yes;
Querying disabled - assuming answer is yes

!XSPEC>   data ad87044010g320170.cal;
 Net count rate (cts/s) for file   1  8.8295E-02+/-  1.3518E-03
   using response (RMF) file...       gis3v4_0.rmf
   1 data set is in use

!XSPEC>   ignore bad;

!XSPEC>   ignore **-4.0;

!XSPEC>   ignore 8.0-**;

!XSPEC>   model powerlaw/b + gauss/b + gauss/b ;0.0 ; ;5.9 ;0.0 ; ;6.5 ;0.0 ; ;
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
Param# 1  :!Param# 1  : 0.0 
Param# 2  :!Param# 2  : 
Param# 3  :!Param# 3  : 5.9 
Param# 4  :!Param# 4  : 0.0 
Param# 5  :!Param# 5  : 
Param# 6  :!Param# 6  : 6.5 
Param# 7  :!Param# 7  : 0.0 
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     +/-      0.
    2    2    1   powerlaw/b norm                1.000     +/-      0.
    3    3    2   gaussian/b LineE    keV        5.900     +/-      0.
    4    4    2   gaussian/b Sigma    keV           0.     +/-      0.
    5    5    2   gaussian/b norm                1.000     +/-      0.
    6    6    3   gaussian/b LineE    keV        6.500     +/-      0.
    7    7    3   gaussian/b Sigma    keV           0.     +/-      0.
    8    8    3   gaussian/b norm                1.000     +/-      0.
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =     1.1213842E+08 using    84 PHA bins.
 Reduced chi-squared =      1475506.     for     76 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 6 = 3 1.101005;
Equating parameter :LineE to parameter gaussian:LineE  * 1.10101
    7 variable fit parameters
 Chi-Squared =     1.1213842E+08 using    84 PHA bins.
 Reduced chi-squared =      1456343.     for     77 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   newpar 7 = 4 1.049288;
Equating parameter :Sigma to parameter :Sigma  * 1.04929
    6 variable fit parameters
 Chi-Squared =     1.1213842E+08 using    84 PHA bins.
 Reduced chi-squared =      1437672.     for     78 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   freeze 1;
 Number of variable fit parameters =    5

!XSPEC>   renorm;
 Chi-Squared =      2497.557     using    84 PHA bins.
 Reduced chi-squared =      31.61465     for     79 degrees of freedom
 Null hypothesis probability =    0.

!XSPEC>   fit;
 Chi-Squared    Lvl  Fit param # 1     2           3           4
                 5           6
   352.945     -4         0.      1.9017E-03   5.810          0.
              4.5837E-02  1.4875E-02
   304.361     -5         0.      3.4824E-04   5.834          0.
              4.5843E-02  1.4399E-02
   240.206     -6         0.      1.6446E-03   5.870          0.
              4.7558E-02  1.2970E-02
   184.222      0         0.      1.0915E-03   5.856          0.
              4.8131E-02  1.2237E-02
   184.026      1         0.      1.0896E-03   5.855          0.
              4.8148E-02  1.2228E-02
   183.834      1         0.      1.0877E-03   5.855          0.
              4.8165E-02  1.2218E-02
   183.645      1         0.      1.0859E-03   5.855          0.
              4.8182E-02  1.2209E-02
   183.461      1         0.      1.0840E-03   5.855          0.
              4.8198E-02  1.2199E-02
   183.280      1         0.      1.0823E-03   5.855          0.
              4.8215E-02  1.2190E-02
 Number of trials exceeded - last iteration delta =   0.1807
   183.103      1         0.      1.0805E-03   5.854          0.
              4.8231E-02  1.2181E-02
   182.930      1         0.      1.0788E-03   5.854          0.
              4.8247E-02  1.2172E-02
   182.760      1         0.      1.0771E-03   5.854          0.
              4.8263E-02  1.2163E-02
   182.743      2         0.      1.0770E-03   5.854          0.
              4.8265E-02  1.2162E-02
   182.726      2         0.      1.0768E-03   5.854          0.
              4.8266E-02  1.2161E-02
   182.709      2         0.      1.0766E-03   5.854          0.
              4.8268E-02  1.2161E-02
   182.692      2         0.      1.0765E-03   5.854          0.
              4.8270E-02  1.2160E-02
   182.675      2         0.      1.0763E-03   5.854          0.
              4.8271E-02  1.2159E-02
   182.658      2         0.      1.0761E-03   5.854          0.
              4.8273E-02  1.2158E-02
   182.642      2         0.      1.0760E-03   5.854          0.
              4.8274E-02  1.2157E-02
 Number of trials exceeded - last iteration delta =   1.6769E-02
   182.640      3         0.      1.0760E-03   5.854          0.
              4.8275E-02  1.2157E-02
   132.912     -3         0.      8.9981E-04   5.884      9.1976E-02
              5.0392E-02  1.0631E-02
   110.612     -4         0.      7.4990E-04   5.899      0.1375
              5.3679E-02  9.0625E-03
   107.041     -5         0.      8.6850E-04   5.906      0.1378
              5.4672E-02  8.1948E-03
   106.703     -6         0.      7.7665E-04   5.908      0.1389
              5.4869E-02  8.0334E-03
   106.603     -7         0.      8.5604E-04   5.908      0.1392
              5.4915E-02  7.9998E-03
   106.557     -8         0.      7.8890E-04   5.908      0.1393
              5.4925E-02  7.9925E-03
   106.529     -9         0.      8.4587E-04   5.908      0.1393
              5.4927E-02  7.9910E-03
   106.509    -10         0.      7.9750E-04   5.908      0.1393
              5.4927E-02  7.9906E-03
   106.496    -11         0.      8.3851E-04   5.908      0.1393
              5.4927E-02  7.9906E-03
 Number of trials exceeded - last iteration delta =   1.3344E-02
   106.486    -12         0.      8.0369E-04   5.908      0.1393
              5.4927E-02  7.9905E-03
   106.479    -13         0.      8.3322E-04   5.908      0.1393
              5.4927E-02  7.9905E-03
 ---------------------------------------------------------------------------
 Variances and Principal axes :
               2     3     4     5     6
 3.42E-08 | -1.00  0.00 -0.01 -0.02 -0.08
 3.53E-07 |  0.08 -0.05 -0.01 -0.07 -0.99
 1.25E-06 | -0.02 -0.04 -0.04  1.00 -0.07
 1.13E-04 |  0.00  0.40  0.91  0.05 -0.04
 3.48E-05 |  0.00 -0.91  0.40 -0.02  0.04
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  Model:  powerlaw/b[1] + gaussian/b[2] + gaussian/b[3]
  Model Fit Model Component  Parameter  Unit     Value
  par   par comp
    1    1    1   powerlaw/b PhoIndex               0.     frozen
    2    2    1   powerlaw/b norm               8.3322E-04 +/-  0.1978E-03
    3    3    2   gaussian/b LineE    keV        5.908     +/-  0.6870E-02
    4    4    2   gaussian/b Sigma    keV       0.1393     +/-  0.1002E-01
    5    5    2   gaussian/b norm               5.4927E-02 +/-  0.1244E-02
    6    3    3   gaussian/b LineE    keV        6.505     = par   3 *   1.101
    7    4    3   gaussian/b Sigma    keV       0.1462     = par   4 *   1.049
    8    6    3   gaussian/b norm               7.9905E-03 +/-  0.7503E-03
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
 Chi-Squared =      106.4788     using    84 PHA bins.
 Reduced chi-squared =      1.347833     for     79 degrees of freedom
 Null hypothesis probability = 2.139E-02

!XSPEC>   setplot energy;

!XSPEC>   setplot com label top GIS3 Calibration Source, should peak near 5.9 keV;

!XSPEC>   setplot com log x off;

!XSPEC>   setplot com rescale x 4 8;

!XSPEC>   setplot com hard /ps;

!XSPEC>   plot;

!XSPEC>   exit;
 XSPEC: quit

!XSPEC>    tclexit
-> Calibration source ad87044010g320170.cal peaks at 5.908 +/- 0.00687 keV

Extracting bright and dark Earth event files. (20:11:4)

-> Extracting bright and dark Earth events from ad87044010s000102m.unf
-> Extracting ad87044010s000102m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.21E+05    27110 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000102m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          27110      1892              0     25218         0         0
 Writing events file
   1892 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         27110      1892              0     25218         0         0
   in  1464.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s000102m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000102m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1892
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        1217
 Flickering pixels iter, pixels & cnts :   1          14          83
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           20
 Number of (internal) image counts   :         1892
 Number of image cts rejected (N, %) :         130068.71
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           20            0            0
 
 Image counts      :             0         1892            0            0
 Image cts rejected:             0         1300            0            0
 Image cts rej (%) :          0.00        68.71         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1892            0            0
 Total cts rejected:             0         1300            0            0
 Total cts rej (%) :          0.00        68.71         0.00         0.00
 
 Number of clean counts accepted  :          592
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           20
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s000112m.unf
-> Extracting ad87044010s000112m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.21E+05    27472 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000112m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          27472      1916              0     25556         0         0
 Writing events file
   1916 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         27472      1916              0     25556         0         0
   in  1464.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s000112m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000112m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1916
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        1217
 Flickering pixels iter, pixels & cnts :   1          14          83
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           20
 Number of (internal) image counts   :         1916
 Number of image cts rejected (N, %) :         130067.85
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           20            0            0
 
 Image counts      :             0         1916            0            0
 Image cts rejected:             0         1300            0            0
 Image cts rej (%) :          0.00        67.85         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         1916            0            0
 Total cts rejected:             0         1300            0            0
 Total cts rej (%) :          0.00        67.85         0.00         0.00
 
 Number of clean counts accepted  :          616
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           20
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s000202h.unf
-> Extracting ad87044010s000202h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.20E+05    21967 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000202h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          21967       914              0     21053         0         0
 Writing events file
    914 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         21967       914              0     21053         0         0
   in  1088.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s000202h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000202h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          914
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               5         849
 Flickering pixels iter, pixels & cnts :   1           3          15
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            8
 Number of (internal) image counts   :          914
 Number of image cts rejected (N, %) :          86494.53
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            8            0            0
 
 Image counts      :             0          914            0            0
 Image cts rejected:             0          864            0            0
 Image cts rej (%) :          0.00        94.53         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          914            0            0
 Total cts rejected:             0          864            0            0
 Total cts rej (%) :          0.00        94.53         0.00         0.00
 
 Number of clean counts accepted  :           50
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            8
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s000212h.unf
-> Extracting ad87044010s000212h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.20E+05    22286 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000212h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          22286       923              0     21363         0         0
 Writing events file
    923 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         22286       923              0     21363         0         0
   in  1088.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s000212h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000212h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :          923
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               5         849
 Flickering pixels iter, pixels & cnts :   1           3          15
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :            8
 Number of (internal) image counts   :          923
 Number of image cts rejected (N, %) :          86493.61
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            8            0            0
 
 Image counts      :             0          923            0            0
 Image cts rejected:             0          864            0            0
 Image cts rej (%) :          0.00        93.61         0.00         0.00
 
    filtering data...
 
 Total counts      :             0          923            0            0
 Total cts rejected:             0          864            0            0
 Total cts rej (%) :          0.00        93.61         0.00         0.00
 
 Number of clean counts accepted  :           59
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :            8
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s000302h.unf
-> Extracting ad87044010s000302h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  17:42:08    0.76E+03    33789 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000302h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          33789     33789              0         0         0         0
 Writing events file
  33789 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         33789     33789              0         0         0         0
   in  713.70     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s000302h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000302h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        33789
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         891        6619
cleaning chip # 1
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         524        5642
cleaning chip # 2
 Hot pixels & counts                   :               9         309
 Flickering pixels iter, pixels & cnts :   1         471        6335
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         522        7002
 
 Number of pixels rejected           :         2417
 Number of (internal) image counts   :        33789
 Number of image cts rejected (N, %) :        2590776.67
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           891          524          480          522
 
 Image counts      :          8724         8294         7847         8924
 Image cts rejected:          6619         5642         6644         7002
 Image cts rej (%) :         75.87        68.03        84.67        78.46
 
    filtering data...
 
 Total counts      :          8724         8294         7847         8924
 Total cts rejected:          6619         5642         6644         7002
 Total cts rej (%) :         75.87        68.03        84.67        78.46
 
 Number of clean counts accepted  :         7882
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :         2417
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s000312h.unf
-> Extracting ad87044010s000312h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  17:42:08    0.76E+03    35093 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000312h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          35093     35093              0         0         0         0
 Writing events file
  35093 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         35093     35093              0         0         0         0
   in  713.70     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000312h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s000312h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000312h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        35093
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         855        6437
cleaning chip # 1
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         511        6147
cleaning chip # 2
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         517        7824
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         536        7788
 
 Number of pixels rejected           :         2419
 Number of (internal) image counts   :        35093
 Number of image cts rejected (N, %) :        2819680.35
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           855          511          517          536
 
 Image counts      :          8647         8394         8794         9258
 Image cts rejected:          6437         6147         7824         7788
 Image cts rej (%) :         74.44        73.23        88.97        84.12
 
    filtering data...
 
 Total counts      :          8647         8394         8794         9258
 Total cts rejected:          6437         6147         7824         7788
 Total cts rej (%) :         74.44        73.23        88.97        84.12
 
 Number of clean counts accepted  :         6897
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :         2419
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s000402l.unf
-> Extracting ad87044010s000402l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT      LOW         1999-08-13  10:59:38    0.12E+05     9398 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000402l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9398      8298              0      1100         0         0
 Writing events file
   8298 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9398      8298              0      1100         0         0
   in  10131.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT > extract events
!earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s000402l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000402l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         8298
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        7270
 Flickering pixels iter, pixels & cnts :   1           5          58
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           11
 Number of (internal) image counts   :         8298
 Number of image cts rejected (N, %) :         732888.31
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           11            0            0
 
 Image counts      :             0         8298            0            0
 Image cts rejected:             0         7328            0            0
 Image cts rej (%) :          0.00        88.31         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         8298            0            0
 Total cts rejected:             0         7328            0            0
 Total cts rej (%) :          0.00        88.31         0.00         0.00
 
 Number of clean counts accepted  :          970
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           11
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s000412l.unf
-> Extracting ad87044010s000412l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S0CCDPOW
      1 ABELL_S295_ BRIGHT2     LOW         1999-08-13  10:59:38    0.12E+05     9508 0100
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s000412l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9508      8394              0      1114         0         0
 Writing events file
   8394 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9508      8394              0      1114         0         0
   in  10131.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s000412l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS0-BRIGHT2 > extract events
!earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s000412l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s000412l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         8394
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
 Hot pixels & counts                   :               6        7270
 Flickering pixels iter, pixels & cnts :   1           5          58
cleaning chip # 2
cleaning chip # 3
 
 Number of pixels rejected           :           11
 Number of (internal) image counts   :         8394
 Number of image cts rejected (N, %) :         732887.30
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0           11            0            0
 
 Image counts      :             0         8394            0            0
 Image cts rejected:             0         7328            0            0
 Image cts rej (%) :          0.00        87.30         0.00         0.00
 
    filtering data...
 
 Total counts      :             0         8394            0            0
 Total cts rejected:             0         7328            0            0
 Total cts rej (%) :          0.00        87.30         0.00         0.00
 
 Number of clean counts accepted  :         1066
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           11
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100102m.unf
-> Extracting ad87044010s100102m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      MEDIUM      1999-08-13  11:02:50    0.21E+05    41854 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100102m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          41854      2939              0     38915         0         0
 Writing events file
   2939 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         41854      2939              0     38915         0         0
   in  1464.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100102m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s100102m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100102m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         2939
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10        2481
 Flickering pixels iter, pixels & cnts :   1           1           4
 
 Number of pixels rejected           :           11
 Number of (internal) image counts   :         2939
 Number of image cts rejected (N, %) :         248584.55
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           11
 
 Image counts      :             0            0            0         2939
 Image cts rejected:             0            0            0         2485
 Image cts rej (%) :          0.00         0.00         0.00        84.55
 
    filtering data...
 
 Total counts      :             0            0            0         2939
 Total cts rejected:             0            0            0         2485
 Total cts rej (%) :          0.00         0.00         0.00        84.55
 
 Number of clean counts accepted  :          454
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           11
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100112m.unf
-> Extracting ad87044010s100112m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     MEDIUM      1999-08-13  11:02:50    0.21E+05    42138 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100112m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          42138      2954              0     39184         0         0
 Writing events file
   2954 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         42138      2954              0     39184         0         0
   in  1464.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100112m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s100112m.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100112m.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         2954
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10        2481
 Flickering pixels iter, pixels & cnts :   1           1           4
 
 Number of pixels rejected           :           11
 Number of (internal) image counts   :         2954
 Number of image cts rejected (N, %) :         248584.12
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           11
 
 Image counts      :             0            0            0         2954
 Image cts rejected:             0            0            0         2485
 Image cts rej (%) :          0.00         0.00         0.00        84.12
 
    filtering data...
 
 Total counts      :             0            0            0         2954
 Total cts rejected:             0            0            0         2485
 Total cts rej (%) :          0.00         0.00         0.00        84.12
 
 Number of clean counts accepted  :          469
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           11
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100202h.unf
-> Extracting ad87044010s100202h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  13:06:14    0.20E+05    38369 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100202h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          38369      1863              0     36506         0         0
 Writing events file
   1863 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38369      1863              0     36506         0         0
   in  1084.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100202h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s100202h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100202h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1863
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10        1792
 
 Number of pixels rejected           :           10
 Number of (internal) image counts   :         1863
 Number of image cts rejected (N, %) :         179296.19
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           10
 
 Image counts      :             0            0            0         1863
 Image cts rejected:             0            0            0         1792
 Image cts rej (%) :          0.00         0.00         0.00        96.19
 
    filtering data...
 
 Total counts      :             0            0            0         1863
 Total cts rejected:             0            0            0         1792
 Total cts rej (%) :          0.00         0.00         0.00        96.19
 
 Number of clean counts accepted  :           71
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           10
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100212h.unf
-> Extracting ad87044010s100212h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  13:06:14    0.20E+05    38590 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100212h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          38590      1866              0     36724         0         0
 Writing events file
   1866 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         38590      1866              0     36724         0         0
   in  1084.6     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100212h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s100212h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100212h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         1866
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10        1792
 
 Number of pixels rejected           :           10
 Number of (internal) image counts   :         1866
 Number of image cts rejected (N, %) :         179296.03
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           10
 
 Image counts      :             0            0            0         1866
 Image cts rejected:             0            0            0         1792
 Image cts rej (%) :          0.00         0.00         0.00        96.03
 
    filtering data...
 
 Total counts      :             0            0            0         1866
 Total cts rejected:             0            0            0         1792
 Total cts rej (%) :          0.00         0.00         0.00        96.03
 
 Number of clean counts accepted  :           74
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           10
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100302h.unf
-> Extracting ad87044010s100302h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      HIGH        1999-08-13  17:42:16    0.76E+03    26677 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100302h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          26677     26677              0         0         0         0
 Writing events file
  26677 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         26677     26677              0         0         0         0
   in  713.70     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100302h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s100302h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100302h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        26677
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         662        4602
cleaning chip # 1
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         667        4683
cleaning chip # 2
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         303        4233
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         744        4859
 
 Number of pixels rejected           :         2376
 Number of (internal) image counts   :        26677
 Number of image cts rejected (N, %) :        1837768.89
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :           662          667          303          744
 
 Image counts      :          6926         7238         5039         7474
 Image cts rejected:          4602         4683         4233         4859
 Image cts rej (%) :         66.45        64.70        84.00        65.01
 
    filtering data...
 
 Total counts      :          6926         7238         5039         7474
 Total cts rejected:          4602         4683         4233         4859
 Total cts rej (%) :         66.45        64.70        84.00        65.01
 
 Number of clean counts accepted  :         8300
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :         2376
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100312h.unf
-> Extracting ad87044010s100312h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     HIGH        1999-08-13  17:42:16    0.76E+03     9105 1111
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100312h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           9105      9105              0         0         0         0
 Writing events file
   9105 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          9105      9105              0         0         0         0
   in  713.70     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100312h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   16.000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s100312h.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100312h.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :         9105
 
    copy bad pix array...
cleaning chip # 0
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1          67         201
cleaning chip # 1
 Hot pixels & counts                   :               1           8
 Flickering pixels iter, pixels & cnts :   1           3           9
cleaning chip # 2
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         280        3125
cleaning chip # 3
 Hot pixels & counts                   :               0           0
 Flickering pixels iter, pixels & cnts :   1         360        2603
 
 Number of pixels rejected           :          711
 Number of (internal) image counts   :         9105
 Number of image cts rejected (N, %) :         594665.30
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :            67            4          280          360
 
 Image counts      :          1221           74         3979         3831
 Image cts rejected:           201           17         3125         2603
 Image cts rej (%) :         16.46        22.97        78.54        67.95
 
    filtering data...
 
 Total counts      :          1221           74         3979         3831
 Total cts rejected:           201           17         3125         2603
 Total cts rej (%) :         16.46        22.97        78.54        67.95
 
 Number of clean counts accepted  :         3159
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :          711
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100402l.unf
-> Extracting ad87044010s100402l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT      LOW         1999-08-13  10:59:38    0.12E+05    14012 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100402l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14012     12586              0      1426         0         0
 Writing events file
  12586 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14012     12586              0      1426         0         0
   in  10135.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100402l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   2047
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT > extract events
!earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT > exit save_session=no
-> Cleaning hot pixels from ad87044010s100402l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100402l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        12586
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10       11845
 Flickering pixels iter, pixels & cnts :   1           2          38
 
 Number of pixels rejected           :           12
 Number of (internal) image counts   :        12586
 Number of image cts rejected (N, %) :        1188394.41
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           12
 
 Image counts      :             0            0            0        12586
 Image cts rejected:             0            0            0        11883
 Image cts rej (%) :          0.00         0.00         0.00        94.41
 
    filtering data...
 
 Total counts      :             0            0            0        12586
 Total cts rejected:             0            0            0        11883
 Total cts rej (%) :          0.00         0.00         0.00        94.41
 
 Number of clean counts accepted  :          703
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           12
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010s100412l.unf
-> Extracting ad87044010s100412l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  S1CCDPOW
      1 ABELL_S295_ BRIGHT2     LOW         1999-08-13  10:59:38    0.12E+05    14067 0001
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010s100412l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          14067     12631              0      1436         0         0
 Writing events file
  12631 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         14067     12631              0      1436         0         0
   in  10135.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010s100412l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    4
 WMAP   keywords   = DETX       DETY        with binning =    8
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   4095
 
Got the minimum time resolution of the read data:   4.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-SIS1-BRIGHT2 > extract events
!earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no
-> Cleaning hot pixels from ad87044010s100412l.unf
-> Standard Output From FTOOL cleansis:
CLEANSIS_V1.6
    allocating image arrays...
 
 PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS.
 
 * Anomalous pixels may consist of at least two populations.
 
 1. Persistent HOT pixels are removed by comparing to the chip mean.
 
 2. Flickering WARM pixels are removed by comparing to the cell mean.
 
 3. In faint areas (zero bgd), flickering pixels are removed with a
    cutoff threshold.
 
 Hints:
 Choose cell size and thresholds based on the expected background and the PSF.
 Use the DIRTYSIS option to examine the anomalous pixel spectra.
 Try a multiple pass clean:
     Choose a PHA cut to optimize the S/N of the flickering pixels,
     then a broad band clean.
 Be suspicious of extended source cleans.
 For very bright sources you may need to turn off the iteration option.
 
 See the help page for further info (fhelp cleansis)
 
 Poisson clean cell size         :            5
 Poisson probability threshold   :    0.575E-05
 Zero Bgd Cutoff threshold (>)   :            3
 Iterate                         :            F
 Dirtysis                        :            F
 
 Minimum PHA value (inclusive)   :            0
 Maximum PHA value (inclusive)   :         4095
 
    open output  file: ad87044010s100412l.drk
    reading data file: event.tmp
    copying primary header to output file...
    making chip image...
 
 Total counts in chip images :        12631
 
    copy bad pix array...
cleaning chip # 0
cleaning chip # 1
cleaning chip # 2
cleaning chip # 3
 Hot pixels & counts                   :              10       11846
 Flickering pixels iter, pixels & cnts :   1           2          38
 
 Number of pixels rejected           :           12
 Number of (internal) image counts   :        12631
 Number of image cts rejected (N, %) :        1188494.09
 
         By chip   :             0            1            2            3
 
 Pixels rejected   :             0            0            0           12
 
 Image counts      :             0            0            0        12631
 Image cts rejected:             0            0            0        11884
 Image cts rej (%) :          0.00         0.00         0.00        94.09
 
    filtering data...
 
 Total counts      :             0            0            0        12631
 Total cts rejected:             0            0            0        11884
 Total cts rej (%) :          0.00         0.00         0.00        94.09
 
 Number of clean counts accepted  :          747
 
    writing history cards...
    copying extensions...
    writing out hot pixs...
 
 Number of rejected pixels        :           12
 
    updating NEVENTS keywords...
    closing data file...
    closing clean file...
-> Extracting bright and dark Earth events from ad87044010g200170h.unf
-> Extracting ad87044010g200170h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    17981     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17981      2179              0     15802         0         0
 Writing events file
   2179 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17981      2179              0     15802         0         0
   in  3806.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad87044010g200170h.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    17981     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          17981       211              0     17770         0         0
 Writing events file
    211 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         17981       211              0     17770         0         0
   in  96.000     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g200170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad87044010g200270m.unf
-> Extracting ad87044010g200270m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    16654     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16654       597              0     16057         0         0
 Writing events file
    597 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16654       597              0     16057         0         0
   in  1104.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad87044010g200270m.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    16654     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16654       225              0     16429         0         0
 Writing events file
    225 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16654       225              0     16429         0         0
   in  127.86     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g200270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad87044010g200370l.unf
-> Extracting ad87044010g200370l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4359     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4359      4190              0       169         0         0
 Writing events file
   4190 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4359      4190              0       169         0         0
   in  8192.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Extracting ad87044010g200370l.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4359     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g200370l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g200370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS2-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS2-PH > extract events
!earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS2-PH > exit save_session=no
-> Deleting ad87044010g200370l.brt since it contains 0 events
-> Extracting bright and dark Earth events from ad87044010g300170h.unf
-> Extracting ad87044010g300170h.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    16959     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16959      1983              0     14976         0         0
 Writing events file
   1983 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16959      1983              0     14976         0         0
   in  3806.0     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad87044010g300170h.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          HIGH        1999-08-13  13:06:23    0.22E+05    16959     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300170h.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          16959       224              0     16735         0         0
 Writing events file
    224 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         16959       224              0     16735         0         0
   in  96.000     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g300170h.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.62500E-01
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad87044010g300270m.unf
-> Extracting ad87044010g300270m.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    15941     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          15941       568              0     15373         0         0
 Writing events file
    568 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         15941       568              0     15373         0         0
   in  1104.1     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad87044010g300270m.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          MEDIUM      1999-08-13  11:07:15    0.18E+05    15941     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300270m.unf
          Total      Good    Bad: Region      Time     Phase       Cut
          15941       244              0     15697         0         0
 Writing events file
    244 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
         15941       244              0     15697         0         0
   in  127.86     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g300270m.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:  0.50000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting bright and dark Earth events from ad87044010g300370l.unf
-> Extracting ad87044010g300370l.drk
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4078     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 Doing file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.unf
          Total      Good    Bad: Region      Time     Phase       Cut
           4078      3925              0       153         0         0
 Writing events file
   3925 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
          4078      3925              0       153         0         0
   in  8192.3     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==1"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Extracting ad87044010g300370l.brt
-> Standard Output From FTOOL xselect:
 
                         **  XSELECT V2.0   **
 
!> Enter session name >[xsel] earthevents
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
 
 
        OBJECT      DATAMODE    BIT_RATE    DATE-OBS    TIME-OBS    ONTIME   NEVENTS  PHA_BINS
      1 ABELL_S295_ PH          LOW         1999-08-13  11:18:59    0.84E+04     4078     1024
extractor v3.71  3 Jan 2000
 Getting FITS WCS Keywords
 No events selected from file: /data/data23/seq_proc/ad0_87044010.003/ad87044010g300370l.unf
 Writing events file
      0 events written to the output file
===============================================================================
   Grand Total      Good   Bad:  Region      Time     Phase       Cut
             0         0              0         0         0         0
   in      0.     seconds
 Command not found; type ? for a command listing
!earthevents:ASCA > set mission ASCA
 
 Notes: XSELECT set up for      ASCA
 Time keyword is TIME       in units of s
 Default timing binsize =   16.000
 
!earthevents:ASCA > set datadir .
 
Setting data directory to /data/data23/seq_proc/ad0_87044010.003/
Setting mkf directory to /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA > read events ad87044010g300370l.unf
 
Setting...
 Image  keywords   = X          Y           with binning =    1
 WMAP   keywords   = DETX       DETY        with binning =    1
 Energy keywords   = PI                     with binning =    1
 
 
Getting Min and Max for Energy Column...
Got min and max for PI:     0   1023
 
Got the minimum time resolution of the read data:   2.0000
 Number of files read in:   1
 
******************** Observation Catalogue ********************
 
Data Directory is: /data/data23/seq_proc/ad0_87044010.003/
HK Directory is: /data/data23/seq_proc/ad0_87044010.003/
 
!earthevents:ASCA-GIS3-PH > select mkf "FOV==2"  data_dir=.
!earthevents:ASCA-GIS3-PH > extract events
!earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no
Wrote events list to file event.tmp
!earthevents:ASCA-GIS3-PH > exit save_session=no
-> Deleting ad87044010g300370l.brt since it contains 0 events

Determining information about this observation (20:30:37)

-> Calculating ISAS time for sis
-> Calculating ISAS time for gis
-> Recording dates of PI calibration files
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory
-> leapsec.fits is already present in the working directory

Generating event file information page (20:32:13)

-> Summing time and events for s0 event files
-> Standard Output From STOOL get_uniq_keys:
ad87044010s000202h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s000302h.unf|S0CCDPOW|1111|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s000202h.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad87044010s000302h.unf|S0CCDMOD|4|How many S0 CCDs are in use: 1, 2, or 4
ad87044010s000202h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad87044010s000302h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order
-> listing ad87044010s000202h.unf
-> listing ad87044010s000302h.unf
-> listing ad87044010s000102m.unf
-> listing ad87044010s000402l.unf
-> Standard Output From STOOL get_uniq_keys:
ad87044010s000212h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s000312h.unf|S0CCDPOW|1111|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s000212h.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad87044010s000312h.unf|S0CCDMOD|4|How many S0 CCDs are in use: 1, 2, or 4
ad87044010s000212h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad87044010s000312h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order
-> listing ad87044010s000212h.unf
-> listing ad87044010s000312h.unf
-> listing ad87044010s000112m.unf
-> listing ad87044010s000412l.unf
-> Standard Output From STOOL get_uniq_keys:
ad87044010s000201h.unf|S0CCDPOW|0100|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s000301h.unf|S0CCDPOW|1111|Which S0 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s000201h.unf|S0CCDMOD|1|How many S0 CCDs are in use: 1, 2, or 4
ad87044010s000301h.unf|S0CCDMOD|4|How many S0 CCDs are in use: 1, 2, or 4
ad87044010s000201h.unf|S0CCDLST|1 1 1 1|S0 CCD readout order
ad87044010s000301h.unf|S0CCDLST|0 1 2 3|S0 CCD readout order
-> listing ad87044010s000201h.unf
-> listing ad87044010s000301h.unf
-> listing ad87044010s000101m.unf
-> listing ad87044010s000401l.unf
-> Summing time and events for s1 event files
-> Standard Output From STOOL get_uniq_keys:
ad87044010s100202h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s100302h.unf|S1CCDPOW|1111|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s100202h.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad87044010s100302h.unf|S1CCDMOD|4|How many S1 CCDs are in use: 1, 2, or 4
ad87044010s100202h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad87044010s100302h.unf|S1CCDLST|2 3 0 1|S1 CCD readout order
-> listing ad87044010s100202h.unf
-> listing ad87044010s100302h.unf
-> listing ad87044010s100102m.unf
-> listing ad87044010s100402l.unf
-> Standard Output From STOOL get_uniq_keys:
ad87044010s100212h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s100312h.unf|S1CCDPOW|1111|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s100212h.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad87044010s100312h.unf|S1CCDMOD|4|How many S1 CCDs are in use: 1, 2, or 4
ad87044010s100212h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad87044010s100312h.unf|S1CCDLST|2 3 0 1|S1 CCD readout order
-> listing ad87044010s100212h.unf
-> listing ad87044010s100312h.unf
-> listing ad87044010s100112m.unf
-> listing ad87044010s100412l.unf
-> Standard Output From STOOL get_uniq_keys:
ad87044010s100201h.unf|S1CCDPOW|0001|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s100301h.unf|S1CCDPOW|1111|Which S1 CCDs are in use(0123): 0=OFF 1=ON
ad87044010s100201h.unf|S1CCDMOD|1|How many S1 CCDs are in use: 1, 2, or 4
ad87044010s100301h.unf|S1CCDMOD|4|How many S1 CCDs are in use: 1, 2, or 4
ad87044010s100201h.unf|S1CCDLST|3 3 3 3|S1 CCD readout order
ad87044010s100301h.unf|S1CCDLST|2 3 0 1|S1 CCD readout order
-> listing ad87044010s100201h.unf
-> listing ad87044010s100301h.unf
-> listing ad87044010s100101m.unf
-> listing ad87044010s100401l.unf
-> Summing time and events for g2 event files
-> listing ad87044010g200170h.unf
-> listing ad87044010g200270m.unf
-> listing ad87044010g200370l.unf
-> Summing time and events for g3 event files
-> listing ad87044010g300170h.unf
-> listing ad87044010g300270m.unf
-> listing ad87044010g300370l.unf

Creating HTML header page (20:40:46)

Creating HTML source list (20:41:22)

Doing final wrapup of all files (20:42:47)

-> Copying job.par to ad87044010_003_job.par
-> Copying ad0.par to ad87044010_003_process.par
-> Creating ad87044010_tape.cat
-> Creating ad87044010_trend.cat
-> Creating ad87044010_003_file_info.html
-> Calculating site-independant checksums
-> Site independant checksum: 37836
-> Updating FITS checksum keywords
-> Running fverify on all FITS files

Processing complete (21:9:5)